Search Results

Search found 3545 results on 142 pages for 'arrays'.

Page 15/142 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Move OS from RAID5 array to RAID 1 arrays

  - by Antoine

  I want to give a last boost to my old ProLiant ML350 G5 server which just needs to be reliable for a few more year only ! With a defined budget of about 1500$ (I do not have more), i plan to replace the CPU (+ adding a second one), the battery cache of my raid controller (E200i), double the RAM, and change all hard drives. I have 7 HDD (SAS 10krpm, 72Gb) + 1 spare in RAID5, and my system is all FULL (no empty tray, full disks). in my current RAID5 array, I have 2 partitions: - 1 OS partition, 20Gb - 1 data partition, 350 Gb I plan to replace these 8 disks with : - 2 x 300Gb SAS 15krpm in RAID 1 (= 1 partition for OS) - 2 x 2Tb SATA 7.2krpm in RAID 1 (= 1 partition for DATA) My biggest constraint is that I have only 01 day to upgrade my server. Therefore, I'm looking for cloning all my files (OS + data partition) to my new arrays, i.e : - the OS partition shall be cloned to the RAID1 "2x300Gb array" - the data partition shall be cloned to the RAID1 "2x2Tb array" My second problem is that I need to physically remove all the old hard drives before inserting the new ones. I'm running Windows Server 2003 R2, and even if MS support will expire soon, I cannot buy a new licence and spent time in configuration. Obviously, with 1500$, I cannot also buy a new server that I could start configuring from now ! Thought about ASR (NTBackup), but I have no floppy drive (and do not really want to invest in one !) Thought about a clonezilla clone, and read this interesting link : Windows Server 2003 - move C: partition to a new SAS disk , but i'm not so confident in using Clonezilla with RAID5. What should be the best option to quickly and easily (if possible!) "copy/paste" my OS (so no need to reinstall and reconfigure all) and DATA / programs / services, etc... ? Thanks for your comments

  Read the article

• Is this the best way to grab common elements from a Hash of arrays?

  - by Hulihan Applications

  I'm trying to get a common element from a group of arrays in Ruby. Normally, you can use the & operator to compare two arrays, which returns elements that are present or common in both arrays. This is all good, except when you're trying to get common elements from more than two arrays. However, I want to get common elements from an unknown, dynamic number of arrays, which are stored in a hash. I had to resort to using the eval() method in ruby, which executes a string as actual code. Here's the function I wrote: def get_common_elements_for_hash_of_arrays(hash) # get an array of common elements contained in a hash of arrays, for every array in the hash. # ["1","2","3"] & ["2","4","5"] & ["2","5","6"] # => ["2"] # eval("[\"1\",\"2\",\"3\"] & [\"2\",\"4\",\"5\"] & [\"2\",\"5\",\"6\"]") # => ["2"] eval_string_array = Array.new # an array to store strings of Arrays, ie: "[\"2\",\"5\",\"6\"]", which we will join with & to get all common elements hash.each do |key, array| eval_string_array << array.inspect end eval_string = eval_string_array.join(" & ") # create eval string delimited with a & so we can get common values return eval(eval_string) end example_hash = {:item_0 => ["1","2","3"], :item_1 => ["2","4","5"], :item_2 => ["2","5","6"] } puts get_common_elements_for_hash_of_arrays(example_hash) # => 2 This works and is great, but I'm wondering...eval, really? Is this the best way to do it? Are there even any other ways to accomplish this(besides a recursive function, of course). If anyone has any suggestions, I'm all ears. Otherwise, Feel free to use this code if you need to grab a common item or element from a group or hash of arrays, this code can also easily be adapted to search an array of arrays.

  Read the article

• Is this the best way to grab Common element from a Hash of arrays?

  - by Hulihan Applications

  I'm trying to get a common element from a group of arrays in Ruby. Normally, you can use the & operator to compare two arrays, which returns elements that are present or common in both arrays. This is all good, except when you're trying to get common elements from more than two arrays. However, I want to get common elements from an unknown, dynamic number of arrays, which are stored in a hash. I had to resort to using the eval() method in ruby, which executes a string as actual code. Here's the function I wrote: def get_common_elements_for_hash_of_arrays(hash) # get an array of common elements contained in a hash of arrays, for every array in the hash. # ["1","2","3"] & ["2","4","5"] & ["2","5","6"] # => ["2"] # eval("[\"1\",\"2\",\"3\"] & [\"2\",\"4\",\"5\"] & [\"2\",\"5\",\"6\"]") # => ["2"] eval_string_array = Array.new # an array to store strings of Arrays, ie: "[\"2\",\"5\",\"6\"]", which we will join with & to get all common elements hash.each do |key, array| eval_string_array << array.inspect end eval_string = eval_string_array.join(" & ") # create eval string delimited with a & so we can get common values return eval(eval_string) end example_hash = {:item_0 => ["1","2","3"], :item_1 => ["2","4","5"], :item_2 => ["2","5","6"] } puts get_common_elements_for_hash_of_arrays(example_hash) # => 2 This works and is great, but I'm wondering...eval, really? Is this the best way to do it? Are there even any other ways to accomplish this(besides a recursive function, of course). If anyone has any suggestions, I'm all ears. Otherwise, Feel free to use this code if you need to grab a common item or element from a group or hash of arrays, this code can also easily be adapted to search an array of arrays.

  Read the article

• Can I specify default value?

  - by atch

  Why is it that for user defined types when creating an array of objects every element of this array is initialized with default ctor but when I create built-in type this isn't the case? And second question: is it possible to specify default value to be used while initialize? Something like this (not valid): char* p = new char[size]('\0'); And another question in this topic while I'm with arrays. I suppose that when creating an array of user defined type and knowing the fact that every elem. of this array will be initialized with default value firstly why? If arrays for built in types do not initialize their elems. with their dflts why do they do it for UDT, and secondly: is there a way to switch it off/avoid/circumvent somehow? It seems like bit of a waste if I for example have created an array with size 10000 and then 10000 times dflt ctor will be invoked and I will (later on) overwrite this values anyway. I think that behaviour should be consistent, so either every type of array should be initialized or none. And I think that the behaviour for built-in arrays is more appropriate.

  Read the article

• array multiplication task

  - by toby

  I am tying to get around how you will multiply the values in 2 arrays (as an input) to get an output. The problem I have is the how to increment the loops to achieve the task shown below #include <iostream> using namespace std; main () { int* filter1, *signal,fsize1=0,fsize2=0,i=0; cout<<" enter size of filter and signal"<<endl; cin>> fsize1 >> fsize2; filter1= new int [fsize1]; signal= new int [fsize2]; cout<<" enter filter values"<<endl; for (i=0;i<fsize1;i++) cin>>filter1[i]; cout<<" enter signal values"<<endl; for (i=0;i<fsize2;i++) cin>>signal[i]; /* the two arrays should be filled by users but use the arrays below for test int array1[6]={2,4,6,7,8,9}; int array2[3]={1,2,3}; The output array should be array3[9]={1*2,(1*4+2*2),(1*6+2*4+3*2),........,(1*9+2*8+3*7),(2*9+3*8),3*9} */ return 0; } This is part of a bigger task concerning filter of a sampled signal but it is this multiplication that i cant get done.

  Read the article

• From a language design perspective, if Javascript objects are simply associative arrays, then why ha

  - by Christopher Altman

  I was reading about objects in O'Reilly Javascript Pocket Reference and the book made the following statement. An object is a compound data type that contains any number of properties. Javascript objects are associative arrays: they associate arbitrary data values with arbitrary names. From a language design perspective, if objects are simply associative arrays, then why have objects? I appreciate the convenience of having objects in the language, but if convenience is the main purpose for adding a data type, then how do you decide what to add and what to not add in a language? A language can quickly become bloated and less valuable if it is weighed down by several overlapping methods and data types (Is this a true statement or am I missing something).

  Read the article

• Variables versus constants versus associative arrays in PHP

  - by susmits

  I'm working on a small project, and need to implement internationalization support somehow. I am thinking along the lines of using constants to define a lot of symbols for text in one file, which could be included subsequently. However, I'm not sure if using variables is faster, or if I can get away with using associative arrays without too much of a performance hit. What's better for defining constant values in PHP, performance-wise -- constants defined using define("FOO", "..."), or simple variables like $foo = "...", or associative arrays like $symbols["FOO"]?

  Read the article

• using nested arrays by php http_build_query() and recieve them in flash AS3

  - by Mahmoud

  hi, i am having this hard time figuring what is needed to do, i am using URLVariables to send/recieve values between flash and PHP the problem is, i am unable to access nested arrays ( array inside an array ) with flash heres an example: $dgresult = array("total" = $results); echo http_build_query($dgresult,"flf_"); in flash, all i need to do is to use: var variables:URLVariables = new URLVariables(e.target.data); then i can access it with : variables.total the problem now is when i have nested arrays: $dgresult = array("total" = $results); array_push($dgresult,$another_array); http_build_query($dgresult,"flf_"); i can still access variables.total but what about anything that has flf_ ? how is that possible?

  Read the article

• Doing permutation of different arrays in perl

  - by nubie2

  Hello! I want to do permutation in perl. For example I have three arrays. ["big", "tiny", "small"] and then I have ["red", "yellow", "green"] and also ["apple", "pear", "banana"]. How do I get: ["big", "red", "apple"] ["big", "red", "pear"] ..etc.. ["small", "green", "banana"] I understand this is called permutation. But I am not sure how to do it. Also I don't know how many arrays I can have. There may be three or four, so I don't want to do nested loop.

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• Problem in passing arrays from C# to C++

  - by Rakesh K

  Hi, I have an application in which I need to pass an array from C# to a C++ DLL. What is the best method to do it? I did some search on Internet and figured out that I need to pass the arrays from C# using ref. The code for the same: status = IterateCL(ref input, ref output); The input and output arrays are of length 20. and the corresponding code in C++ DLL is IterateCL(int *&inArray, int *&outArray) This works fine for once. But if I try to call the function from C# in a loop the second time, the input array in C# is showing up as an array of one element. Why is this happening and please help me how I can call this function iteratively from C#. Thanks, Rakesh.

  Read the article

• Optimum ordering for packed vertex arrays on iPhone

  - by Pestilence

  Is there an optimum packing format for vertex arrays on the iPhone hardware? My textured (triangle) arrays are ordered: Vertex (x, y, z) Vertex Normal (x, y, z) Texture Coordinates (u, v) This is the way I've always done it. Should the UVs come before the normals? I'm not sure if it matters. I'd assume that the texturing & lighting units would have a preference, but I can't find anything about it. I certainly can't detect a difference.

  Read the article

• How to use arrays in addding numbers?

  - by Saranya.R

  Hey Can anyone tel me how to use arrays in Android.I need to add the numbers given by the user...Pls help me

  Read the article

• Some exam questions about C++ vectors and arrays...

  - by xbonez

  Hey guys, I have a CS exam tomorrow. Just want to get a few questions cleared up. Thanks a lot, and I really appreciate the help. Que 1. What are parallel vectors? Vectors of the same length that contain data that is meant to be processed together Vectors that are all of the same data type Vectors that are of the same length Any vector of data type parallel Que 2. Arrays are faster and more efficient than vectors. True False Que 3. Arrays can be a return type of a function call. True False Que 4. Vectors can be a return type of a function call. True False

  Read the article

• Compare two integer arrays with same length

  - by meta

  [Description] Given two integer arrays with the same length. Design an algorithm which can judge whether they're the same, the definition of "same" is that, if these two arrays are in sorted order, the elements in corresponding position should be the same. [Example] <1 2 3 4> = <3 1 2 4> <1 2 3 4> != <3 4 1 1> [Limitation] The algorithm should require constant extra space, and O(n) running time.

  Read the article

• Java - Basic use of arrays

  - by javaisjusttoohard

  This is a basic question but I do need some help. Given two arrays of ints, a and b, return true if they have the same first element or they have the same last element. Both arrays will be length 1 or more. commonEnd({1, 2, 3}, {7, 3}) ? true commonEnd({1, 2, 3}, {7, 3, 2}) ? false commonEnd({1, 2, 3}, {1, 3}) ? true I have the following code but it wont compile: public boolean commonEnd(int[] a, int[] b) { if(a[0] == b[0] || a[a.length-1] ==b[b.length-1]) return true; }

  Read the article

• Double associative array or indexed + associative array

  - by clover

  I'm undecided what's the best-practice approach for what I'm trying to do. I'm trying to enter data into an array where the data will look like this: apple color: red price: 2 orange color: orange price: 3 banana color: yellow price: 2 pineapple color: yellow price: 5 When I get input, let's say green apple (notice it's a combo of color + name of fruit), I'm going to check if the name of fruit part exists in the array and display its data (if it exists). What's the right way to compose those arrays? How would I do an indexed array containing an associative array? (or would this be better as 2 nested associative arrays, I'm guessing not)

  Read the article

• Pascal - bad number format

  - by Donator

  Program: program s; type info = record name, surname: string; min, sek: integer; end; type arrays = array[1..50] of info; var c, b: text; A: arrays; gr_sk, grup_dal: integer; begin assign(c, 'info.txt'); reset(c); read(c, gr_sk); read(c, grup_dal); id := 1; read(c, A[id].name); read(c, A[id].sek); close(c); end. info.txt file: 3 4 yhgf 4 Please, tell me what is wrong with that. It says that it is bad number format for line 19 I guess.

  Read the article

• PHP Array Efficiency and Memory Clarification

  - by CogitoErgoSum

  When declaring an Array in PHP, the index's may be created out of order...I.e Array[1] = 1 Array[19] = 2 Array[4] = 3 My question. In creating an array like this, is the length 19 with nulls in between? If I attempted to get Array[3] would it come as undefined or throw an error? Also, how does this affect memory. Would the memory of 3 index's be taken up or 19? Also currently a developer wrote a script with 3 arrays FailedUpdates[] FailedDeletes[] FailedInserts[] Is it more efficient to do it this way, or do it in the case of an associative array controlling several sub arrays "Failures" array(){ ["Updates"] => array(){ [0] => 12 [1] => 41 } ["Deletes"] => array(){ [0] => 122 [1] => 414 [1] => 43 } ["Inserts"] => array(){ [0] => 12 } }

  Read the article

• Comment associative array in PHP Documentor

  - by Abenil

  Hey Guys, i hope someone can help me out on this one here. I use several associative arrays in my php application and i'm using to php documentor to comment my sources. I never really did specified comments for the arrays in an array, but now i need to do that and dont know how. $array = array('id' => 'test', 'class' => 'tester', 'options' => array('option1' => 1, 'option2' => 2)) So how do i comment this array in the correct way for @var and @param comments? I could do this like this, but dunno, if this is correct: @param string $array['id'] @param string $array['class'] @param int $array['options']['option1'] But how to this for the var part? I hope someone can lead me to the right direction. Thanks in advance for any help. Regards

  Read the article

• php $_POST array empty upon form submission...

  - by Mike D

  Hi folks, I'm baffled on this after much googling. This issue is simple, I have a custom CMS i've built that works perfectly on my dev box (Ubuntu/PHP5+/MySQL5+). I just moved it up to the production box for my client and now all form submissions are showing up as empty $_POST arrays. I found a trick to verify the data is actually being passed using "file_get_contents('php://input');" and the data is showing up fine there -- the $_POST/$_REQUEST arrays are always empty. I've also verified the content-type headers are correct as well via firebug (application/x-www-form-urlencoded; charset=utf-8). This issue is happening regardless of whether a form is submitting via AJAX or a regular form submit. Any help is greatly appreciated!

  Read the article

• Writing complex records to file

  - by DrSobhani

  Hi I have defined some records in my project which may be consisted of other records and also dynamic arrays of normal data types and other records , it is n example of a record type Type1=record x:integer; end; Type2=record Y:array of X; str:string; end; When I tried to save one of variables of these records type to file with blockwrite function like this : var Temp1:Type2; begin setlength(temp1.y,100); blockwrite(MyFile,Temp1,sizeOf(Temp1); it just wrote as much as the size of pure record is ,but temp1 has a dynmic arrays which is resized , Could someone please tell me how I can write a complex record to a file , I mean something like what is used in VB6 . Thanks

  Read the article

• C# Array Maximum

  - by Betamoo

  I have 2 arrays named Arr1 and Arr2 in C#. They are of the exact same dimensions... I need to get the element of Arr1 corresponding to maximum of elements in Arr2 beginning with given indices ... e.g Get indices of the max of Arr2 [ 1 , 10 , 3 , i , j ] for all i,j Return Arr1 [ 1 , 10 , 3 , i , j ] Of course I need the elegant solution (not the "loop for them" one...) Please Note: I do not want to loop through the arrays, because it is 11 dimensional!!.. the code will be ugly and error prone.. and I may run out of variable names :)

  Read the article

• PHP to make vars and values part of array

  - by Chris

  I currently have this function to search and replace in a text file. // Input $ect = array('Visssa', 'Lisssa', 'her'); // Placeholders in the file $put = array('lname', 'fname', 'hisher'); // Replace the placeholders $oput = str_replace($put, $ct, 'tmpfile.txt'); This is not the full program but the idea is replace the values found in tmpfile.txt with the ones found in the $etc array. And it works flawlessly. But, what I need to do is get all passed vars (get/post) and then make the arrays so that the var is the value to replace and the value is the value to replace it with. So, if I sent the url http://xyz.com/?lname=tom&ogre=yes All instances of lname in the file would be replaces with tom and all instances of ogre would be replaced with yes. So somehow it just gets any/all variables passed in get/post and then the arrays showed above would cause the var to be replaced by the value in the file.

  Read the article

• Java Collections.Rotate with an array doesn't work

  - by steve_72

  I have the following java code: import java.util.Arrays; import java.util.Collections; public class Test { public static void main(String[] args) { int[] test = {1,2,3,4,5}; Collections.rotate(Arrays.asList(test), -1); for(int i = 0; i < test.length; i++) { System.out.println(test[i]); } } } I want the array to be rotated, but the output I get is 1 2 3 4 5 Why is this? And is there an alternative solution?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >