Search Results

Search found 399 results on 16 pages for 'workgroup'.

Page 15/16 | < Previous Page | 11 12 13 14 15 16  | Next Page >

  • How can I tell why I have access to a file share on Windows Server

    - by Joel
    I have a file share on a Windows 2008 R2 server in a AD domain (call it \SECURESERVER\STUFF) and I am not sure if I have the share and folder permissions set up right. I noticed the problem when I set up new server (WORKGROUP\FOREIGNSERVER) that was not joined to the domain and tried to copy some files off of \SECURESERVER\STUFF. I was surprised to find that when I tried to access the files, it did not prompt me for a username and password and proceeded to give me full access to the files. That worried me so I tried the same thing on some workstations that were not in the domain and they did NOT have the same behavior (they did prompt for a username/password as desired/expected). So, I think there is something peculiar about FOREIGNSERVER. I am logging into it with a local admin account, but my domain and SECURESERVER should know nothing of this server. I've carefully gone through the share and folder permissions on the share but I can't find the reason that FOREIGNSERVER has access. How can I find out why FOREIGNSERVER has access to SECURESERVER?

    Read the article

  • Must have local user to authenticate Samba to AD?

    - by Phil
    I've got a CentOS 5.3 server with Samba running. I've joined this server to my domain in the hopes of allowing AD users some access to my Samba shares. I've found that this works, but only as long as the AD username that I'm trying to authenticate with is also a local user on the server. In other words, if I'm trying to access a share, and try to authenticate with the AD username "joe", I get errors unless I create a user named 'joe' on the server. I don't have to create a matching password or anything....the local user's password is always blank, so I do know that the authentication is actually happening against the AD. Here's my smb.conf file: [global] workgroup = <mydomain> server string = <snip> netbios name = HOME security = ADS realm = <mydomain.com> password server = <snip> auth methods = winbind log level = 1 log file = /var/log/samba/%m.log [amore] path = /var/www/amore browseable = yes writable = yes valid users = DOMAIN\user1 DOMAIN\user2 DOMAIN\user3 DOMAIN\user4 I would assume that my kerberos settings are fine, as I've joined the domain and can use wbinfo to see users and groups. However, I can provide that info if necessary. Anyone have any ideas?

    Read the article

  • How can I get write permission for the Web (Inetpub) directory on a new Win 7 machine?

    - by marcipollo
    I mirror my Web site on my laptop, and am trying to move the mirror site to a new laptop. I copied the files to the Inetpub directory, and can view them perfectly, but they are read-only (the check-mark is grey, not black), and I cannot change the permission. When I un-check the read-only attribute on the Inetpub directory, and click "apply" it displays a dialog box stating that I need administrative permission to change the attributes. (I am logged in as an administrator). When I click "continue," it pops up another dialog box saying access is denied to the attributes of the file: c:\inetpub\custerr\en-us\500-100.asp That dialog box has an "ignore" button, and if I click that, it appears to work through the directory tree setting the permissions. It leaves all of the files (leafs) set to "read-write," but the directories remain "read only." I am using 64-bit Windows 7. I stopped the IIS service while doing all of this. Might it have something to do with the fact that I copied the files from a different machine in the workgroup (my old laptop)?

    Read the article

  • Samba access works with IP address only

    - by Sebastian Rittau
    I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

    Read the article

  • Setting up a virtual ftp directory that points to another computer

    - by AngryHacker
    I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

    Read the article

  • Have some questions about setting up a VPN to my private cloud servers

    - by Pure.Krome
    I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

    Read the article

  • Cannot connect to a shared network drive

    - by dublintech
    I am using windows 7, I cannot connect to a shared network drive on another machine. I can ping the machine. I can remote desktop connect to the machine. The machine is on the same subnet My friend with the exact same laptop as me (and on the same network, same workgroup) can connect to the shared folder. The machine I am trying to connect to and my friends machine can both see shared folders on my machine. I also cannot see shared folders on the friends laptop. When I select diagnose, windows tells me nothing useful. When I select see details on the error pop up, I see: Error code: 0x80004005 (google doesn't help much) I can nbtstat -a the machine who has the shared folder. When I try with my firewall turned off the same happens. I have ensured my windows 7 has all updates. I run security essentials to ensure my laptop is clean. I run ccleaner to clean up my registry. Same error. I have tried with my laptop on both wireless and ethernet. As you can imagine, I am banging my head against the wall on this one.

    Read the article

  • Can't login to Windows server 2008 (as any user, not even locally, not in safe mode but I have right credentials)

    - by Saix
    Just from nowhere I can't login to my Windows server 2008 machine. All the services like FTP server or webserver (which I'm actually not using, just remote desktop and FTP) are running. Whatever credentials I try (even/especialy administrator), it always says Unknown Username or bad password. I have already tried hard turn off/on and safe mode without luck. Also I already tried type in login name as SERVER NAME\user or Workgroup\user (every case sensitive scenario), still says I have wrong login. Usually we are using remote desktop to access the machine but local access over KVM doesn't work either. Now I'm lock out of any control or any way to do something. There's just logon screen preceding by ctrl+alt+del to login alert. Without me able to login I can't actually try to fix anything. Can't find much more on Internet except the SERVER NAME\user thing. Reinstall would be the last resort but I can't let things this way for much longer anyway. This server is vital. If it would be any help, I think automatic Windows updates are turned off and there were no updates or newly installed software for last couple years and just few soft restarts, non of them recently. It happened during it's runtime while all other services were still up and running, so this couldn't be just some Windows nasty screw up during boot or something. What could have possibly changed? What are my options now?

    Read the article

  • Sun Fire X4800 M2 Posts World Record x86 SPECjEnterprise2010 Result

    - by Brian
    Oracle's Sun Fire X4800 M2 using the Intel Xeon E7-8870 processor and Sun Fire X4470 M2 using the Intel Xeon E7-4870 processor, produced a world record single application server SPECjEnterprise2010 benchmark result of 27,150.05 SPECjEnterprise2010 EjOPS. The Sun Fire X4800 M2 server ran the application tier and the Sun Fire X4470 M2 server was used for the database tier. The Sun Fire X4800 M2 server demonstrated 63% better performance compared to IBM P780 server result of 16,646.34 SPECjEnterprise2010 EjOPS. The Sun Fire X4800 M2 server demonstrated 4% better performance than the Cisco UCS B440 M2 result, both results used the same number of processors. This result used Oracle WebLogic Server 12c, Java HotSpot(TM) 64-Bit Server 1.7.0_02, and Oracle Database 11g. This result was produced using Oracle Linux. Performance Landscape Complete benchmark results are at the SPEC website, SPECjEnterprise2010 Results. The table below compares against the best results from IBM and Cisco. SPECjEnterprise2010 Performance Chart as of 3/12/2012 Submitter EjOPS* Application Server Database Server Oracle 27,150.05 1x Sun Fire X4800 M2 8x 2.4 GHz Intel Xeon E7-8870 Oracle WebLogic 12c 1x Sun Fire X4470 M2 4x 2.4 GHz Intel Xeon E7-4870 Oracle Database 11g (11.2.0.2) Cisco 26,118.67 2x UCS B440 M2 Blade Server 4x 2.4 GHz Intel Xeon E7-4870 Oracle WebLogic 11g (10.3.5) 1x UCS C460 M2 Blade Server 4x 2.4 GHz Intel Xeon E7-4870 Oracle Database 11g (11.2.0.2) IBM 16,646.34 1x IBM Power 780 8x 3.86 GHz POWER 7 WebSphere Application Server V7 1x IBM Power 750 Express 4x 3.55 GHz POWER 7 IBM DB2 9.7 Workgroup Server Edition FP3a * SPECjEnterprise2010 EjOPS, bigger is better. Configuration Summary Application Server: 1 x Sun Fire X4800 M2 8 x 2.4 GHz Intel Xeon processor E7-8870 256 GB memory 4 x 10 GbE NIC 2 x FC HBA Oracle Linux 5 Update 6 Oracle WebLogic Server 11g Release 1 (10.3.5) Java HotSpot(TM) 64-Bit Server VM on Linux, version 1.7.0_02 (Java SE 7 Update 2) Database Server: 1 x Sun Fire X4470 M2 4 x 2.4 GHz Intel Xeon E7-4870 512 GB memory 4 x 10 GbE NIC 2 x FC HBA 2 x Sun StorageTek 2540 M2 4 x Sun Fire X4270 M2 4 x Sun Storage F5100 Flash Array Oracle Linux 5 Update 6 Oracle Database 11g Enterprise Edition Release 11.2.0.2 Benchmark Description SPECjEnterprise2010 is the third generation of the SPEC organization's J2EE end-to-end industry standard benchmark application. The SPECjEnterprise2010 benchmark has been designed and developed to cover the Java EE 5 specification's significantly expanded and simplified programming model, highlighting the major features used by developers in the industry today. This provides a real world workload driving the Application Server's implementation of the Java EE specification to its maximum potential and allowing maximum stressing of the underlying hardware and software systems. The workload consists of an end to end web based order processing domain, an RMI and Web Services driven manufacturing domain and a supply chain model utilizing document based Web Services. The application is a collection of Java classes, Java Servlets, Java Server Pages, Enterprise Java Beans, Java Persistence Entities (pojo's) and Message Driven Beans. The SPECjEnterprise2010 benchmark heavily exercises all parts of the underlying infrastructure that make up the application environment, including hardware, JVM software, database software, JDBC drivers, and the system network. The primary metric of the SPECjEnterprise2010 benchmark is jEnterprise Operations Per Second ("SPECjEnterprise2010 EjOPS"). This metric is calculated by adding the metrics of the Dealership Management Application in the Dealer Domain and the Manufacturing Application in the Manufacturing Domain. There is no price/performance metric in this benchmark. Key Points and Best Practices Sixteen Oracle WebLogic server instances were started using numactl, binding 2 instances per chip. Eight Oracle database listener processes were started, binding 2 instances per chip using taskset. Additional tuning information is in the report at http://spec.org. See Also Oracle Press Release -- SPECjEnterprise2010 Results Page Sun Fire X4800 M2 Server oracle.com OTN Sun Fire X4270 M2 Server oracle.com OTN Sun Storage 2540-M2 Array oracle.com OTN Oracle Linux oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN WebLogic Suite oracle.com OTN Disclosure Statement SPEC and the benchmark name SPECjEnterprise are registered trademarks of the Standard Performance Evaluation Corporation. Sun Fire X4800 M2, 27,150.05 SPECjEnterprise2010 EjOPS; IBM Power 780, 16,646.34 SPECjEnterprise2010 EjOPS; Cisco UCS B440 M2, 26,118.67 SPECjEnterprise2010 EjOPS. Results from www.spec.org as of 3/27/2012.

    Read the article

  • Database Mirroring on SQL Server Express Edition

    - by Most Valuable Yak (Rob Volk)
    Like most SQL Server users I'm rather frustrated by Microsoft's insistence on making the really cool features only available in Enterprise Edition.  And it really doesn't help that they changed the licensing for SQL 2012 to be core-based, so now it's like 4 times as expensive!  It almost makes you want to go with Oracle.  That, and a desire to have Larry Ellison do things to your orifices. And since they've introduced Availability Groups, and marked database mirroring as deprecated, you'd think they'd make make mirroring available in all editions.  Alas…they don't…officially anyway.  Thanks to my constant poking around in places I'm not "supposed" to, I've discovered the low-level code that implements database mirroring, and found that it's available in all editions! It turns out that the query processor in all SQL Server editions prepends a simple check before every edition-specific DDL statement: IF CAST(SERVERPROPERTY('Edition') as nvarchar(max)) NOT LIKE '%e%e%e% Edition%' print 'Lame' else print 'Cool' If that statement returns true, it fails. (the print statements are just placeholders)  Go ahead and test it on Standard, Workgroup, and Express editions compared to an Enterprise or Developer edition instance (which support everything). Once again thanks to Argenis Fernandez (b | t) and his awesome sessions on using Sysinternals, I was able to watch the exact process SQL Server performs when setting up a mirror.  Surprisingly, it's not actually implemented in SQL Server!  Some of it is, but that's something of a smokescreen, the real meat of it is simple filesystem primitives. The NTFS filesystem supports links, both hard links and symbolic, so that you can create two entries for the same file in different directories and/or different names.  You can create them using the MKLINK command in a command prompt: mklink /D D:\SkyDrive\Data D:\Data mklink /D D:\SkyDrive\Log D:\Log This creates a symbolic link from my data and log folders to my Skydrive folder.  Any file saved in either location will instantly appear in the other.  And since my Skydrive will be automatically synchronized with the cloud, any changes I make will be copied instantly (depending on my internet bandwidth of course). So what does this have to do with database mirroring?  Well, it seems that the mirroring endpoint that you have to create between mirror and principal servers is really nothing more than a Skydrive link.  Although it doesn't actually use Skydrive, it performs the same function.  So in effect, the following statement: ALTER DATABASE Mir SET PARTNER='TCP://MyOtherServer.domain.com:5022' Is turned into: mklink /D "D:\Data" "\\MyOtherServer.domain.com\5022$" The 5022$ "port" is actually a hidden system directory on the principal and mirror servers. I haven't quite figured out how the log files are included in this, or why you have to SET PARTNER on both principal and mirror servers, except maybe that mklink has to do something special when linking across servers.  I couldn't get the above statement to work correctly, but found that doing mklink to a local Skydrive folder gave me similar functionality. To wrap this up, all you have to do is the following: Install Skydrive on both SQL Servers (principal and mirror) and set the local Skydrive folder (D:\SkyDrive in these examples) On the principal server, run mklink /D on the data and log folders to point to SkyDrive: mklink /D D:\SkyDrive\Data D:\Data On the mirror server, run the complementary linking: mklink /D D:\Data D:\SkyDrive\Data Create your database and make sure the files map to the principal data and log folders (D:\Data and D:\Log) Viola! Your databases are kept in sync on multiple servers! One wrinkle you will encounter is that the mirror server will show the data and log files, but you won't be able to attach them to the mirror SQL instance while they are attached to the principal. I think this is a bug in the Skydrive, but as it turns out that's fine: you can't access a mirror while it's hosted on the principal either.  So you don't quite get automatic failover, but you can attach the files to the mirror if the principal goes offline.  It's also not exactly synchronous, but it's better than nothing, and easier than either replication or log shipping with a lot less latency. I will end this with the obvious "not supported by Microsoft" and "Don't do this in production without an updated resume" spiel that you should by now assume with every one of my blog posts, especially considering the date.

    Read the article

  • How do I deploy building blocks (quick parts) for Microsoft Outlook 2007?

    - by now
    I want to deploy some building blocks for Microsoft Outlook 2007. Microsoft has put up a poor solution at http://office.microsoft.com/en-us/outlook/HA102086531033.aspx#4 that asks you to save a template. That solution would require you to distribute that template to all the clients. An optimal solution would allow you to put the template containing the building blocks somewhere on the network and simply use the ”Workgroup building blocks path” group policy setting for shared paths in Microsoft Office 2007. Sadly, Outlook doesn’t respect that policy. Also, the described solution mentioned in the article above doesn’t work. Step 4 requests you to save the template as a Word Template after first asking you to save it as an Outlook Template. It seems that they copy&pasted the steps from the Word article and forgot to check whether it worked (and adjust the steps accordingly). Anyway, does anyone have any suggestions for how to distribute the building blocks without distributing NormalEmail.dotm (which will overwrite the clients’ own building blocks each time it is updated). Thanks!

    Read the article

  • WCF/MSMQ Transport Security with Certificates

    - by user104295
    Hi there, my goal is to secure the communication between MSMQ Queue Managers – I don’t want unknown clients sending messages to my MSMQ server. I have spent many hours now trying to get Transport security working for the net.msmq binding in WCF, where MSMQ is in Workgroup mode and the client and server do not have Active Directory… so I’m using certificates. I have created a new X.509 certificate, called Kristan and put it into the “Trusted people” store on the server and into the My store of Current User of the client. The error I’m getting is: An error occurred while sending to the queue: Unrecognized error -1072824272 (0xc00e0030).Ensure that MSMQ is installed and running. If you are sending to a local queue, ensure the queue exists with the required access mode and authorization. Using smartsniff, I see that there’s no attempted connection with the remote MSMQ, however, it’s an error probably coming from the local queue manager. The stack trace is: at System.ServiceModel.Channels.MsmqOutputChannel.OnSend(Message message, TimeSpan timeout) at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.OutputChannelBinder.Send(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) The code:- EndpointAddress endpointAddress = new EndpointAddress(new Uri(endPointAddress)); NetMsmqBinding clientBinding = new NetMsmqBinding(); clientBinding.Security.Mode = NetMsmqSecurityMode.Transport; clientBinding.Security.Transport.MsmqAuthenticationMode = MsmqAuthenticationMode.Certificate; clientBinding.Security.Transport.MsmqProtectionLevel = System.Net.Security.ProtectionLevel.Sign; clientBinding.ExactlyOnce = false; clientBinding.UseActiveDirectory = false; // start new var channelFactory = new ChannelFactory<IAsyncImportApi>(clientBinding, endpointAddress); channelFactory.Credentials.ClientCertificate.SetCertificate("CN=Kristan", StoreLocation.CurrentUser, StoreName.My); The queue is flagged as ‘Authenticated’ on the server. I have checked the effect of this and if I turn off all security in the client send, then I get ‘Signature is invalid’ – which is understandable and shows that it’s definitely looking for a sig. Are there are special ports that I need to check are open for cert-based msmq auth? thanks Kris

    Read the article

  • Is VB Really Case Insensitive?

    - by Otaku
    I'm not trying to start an argument here, but for whatever reason it's typically stated that VB is case insensitive and C languages aren't (and somehow that is a good thing). But here's my question: Where exactly is VB case insensitive? When I type... Dim ss As String Dim SS As String ...into the VS2008 IDE the second one has a warning of "Local variable 'SS' is already declared in the current block". In VBA VBE, it doesn't immediately kick an error, but rather just auto-corrects the case. Am I missing something here with this argument that VB is not case sensitive? (Also, if you know or care to answer, why would that be a bad thing?) EDIT: Why am I even asking this question? I've used VB in many of it's dialects for years now, sometimes as a hobbyist, sometimes for small business-related programs in a workgroup. As of the last 6 months I've been working on a big project, much bigger than I anticipated. Much of the sample source code out there is in C#. I don't have any burning desire to learn C#, but if there are things I'm missing out on that C# offers that VB doesn't (an opposite would be VB.NET offers XML Literals), then I'd like to know more about that feature. So in this case, it's often argued that C languages are case sensitive and that's good and VB is case insensitive and that is bad. I'd like to know A) how exactly is VB case insensitive because every single example in the code editor becomes case sensititive (meaning case gets corrected) whether I want it or not and B) is this compelling enough for me to consider moving to C# if VB.NET case is somehow limiting what I could do with code?

    Read the article

  • why does Integrated Windows Authentication fail when clients access off the network

    - by Bryan
    My background is not with web applications so this problem is hard for me to explain easily. First I'll try to describe the setup. Client setup:-Only browser that is effected is IE 6-8 (Firefox, chrome, opera, and safari all work fine) -A user will try to access our web application from a company laptop that is not connected to our network. -This machine will be a member of our workgroup and have the company DNS listed as a trusted intranet site. (to which the application in question would be a member) -The security logon mode is set to Automatic Logon only in intranet zone only, and IWA authentication is enabled on the clients browser.Server setup:-Windows server 2003 fp2-The application will first redirect to an Authorization asp page which has anonymous access disabled and IWA enabled in IIS.what should happen is that, since the client is not currently on the network, when this page is called it should prompt the user for network credentials. But with IE, instead of prompting, the user gets a page cannot be displayed error because the IIS manager is denying access to the asp page. If the company DNS is removed from the trusted intranet site list then it prompts correctly but disables single sign on the next time that computer is connected to the network or vpn. My assumption is that since IE uses IWA and the site is listed as an internal site, when no network is found IE just sends nulls to the server attempting to authenticate which is swiftly punted back. Other browsers do not have security zones so when network credentials are not present the server prompts for them. Is there a way to get around this so that our clients can keep the company DNS in the intranet zone but still have the server prompt for credentials when not on the network? Any attempt to allow for anonymous access on the asp page, as far as I know, will cause AUTH_USER to return null and again break SSO. I realize this is slightly rambling so I will do my best to clarify and questions you guys might have. Thanks in advance.

    Read the article

  • Trouble using the ref keyword. Very newbie question!

    - by Sergio Tapia
    Here's my class: public class UserInformation { public string Username { get; set; } public string ComputerName { get; set; } public string Workgroup { get; set; } public string OperatingSystem { get; set; } public string Processor { get; set; } public string RAM { get; set; } public string IPAddress { get; set; } public UserInformation GetUserInformation() { var CompleteInformation = new UserInformation(); GetPersonalDetails(ref CompleteInformation); GetMachineDetails(ref CompleteInformation); return CompleteInformation; } private void GetPersonalDetails(ref UserInformation CompleteInformation) { } private void GetMachineDetails(ref UserInformation CompleteInformation) { } } I'm under the impression that the ref keyword tells the computer to use the same variable and not create a new one. Am I using it correctly? Do I have to use ref on both the calling code line and the actual method implementation?

    Read the article

  • WMI Query Script as a Job

    - by Kenneth
    I have two scripts. One calls the other with a list of servers as parameters. The second query is designed to execute a WMI query. When I run it manually, it does this perfectly. When I try to run it as a job it hangs forever and I have to remove it. For the sake of space here is the relevant part of the calling script: ProcessServers.ps1 Start-Job -FilePath .\GetServerDetailsLight.ps1 -ArgumentList $sqlsrv,$destdb,$server,$instance GetServerDetailsLight.ps1 param($sqlsrv,$destdb,$server,$instance) $password = get-content C:\SQLPS\auth.txt | convertto-securestring $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist "DOMAIN\MYUSER",$password [System.Reflection.Assembly]::LoadWithPartialName('Microsoft.SqlServer.SMO') $box_id = 0; if ($sqlsrv.length -eq 0) { write-output "No data passed" break } function getinfo { param( [string]$svr, [string]$inst ) "Entered GetInfo with: $svr,$inst" $cs = get-wmiobject win32_operatingsystem -computername $svr -credential $credentials -authentication 6 -Verbose -Debug | select Name, Model, Manufacturer, Description, DNSHostName, Domain, DomainRole, PartOfDomain, NumberOfProcessors, SystemType, TotalPhysicalMemory, UserName, Workgroup write-output "WMI Results: $cs" } getinfo $server $instance write-output "Complete" Executed as a job it will show as 'running' forever: PS C:\sqlps> Start-Job -FilePath .\GetServerDetailsLight.ps1 -ArgumentList DBSERVER,LOGDB,SERVER01,SERVER01 Id Name State HasMoreData Location Command -- ---- ----- ----------- -------- ------- 21 Job21 Running True localhost param($sqlsrv,$destdb,... GAC Version Location --- ------- -------- True v2.0.50727 C:\WINDOWS\assembly\GAC_MSIL\Microsoft.SqlServer.Smo\10.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.Smo.dll getinfo MSDCHR01 MSDCHR01 Entered GetInfo with: SERVER01,SERVER01 The last output I ever get is the 'Entered GetInfo with: SERVER01,SERVER01'. If I run it manually like so: PS C:\sqlps> .\GetServerDetailsLight.ps1 DBSERVER LOGDB SERVER01 SERVER01 The WMI query executes just as expected. I am trying to determine why this is, or at least a useful way to trap errors from within jobs. Thanks!

    Read the article

  • Is the Subversion 'stack' a realistic alternative to Team Foundation Server?

    - by Robert S.
    I'm evaluating Microsoft Team Foundation Server for my customer, who currently uses Visual SourceSafe and nothing else. They have explicitly expressed a desire to implement a more rigid and process-driven environment as their application is in production and they have future releases to consider. The particular areas I'm trying to cover are: Configuration management (e.g., source control) Change management (workflow and doco for change requests, tasks) Release management (builds and deployments) Incident and problem management (issues and bugs) Document management (similar to source control, but available via web) Code analysis constraints on check-ins A testing framework Reporting Visual Studio 2008 integration TFS does all of these things quite well, but it's expensive and complex to maintain, and the inexpensive Workgroup edition doesn't scale. We don't get TFS as part of our MSDN subscription. Those problems can be overcome, but before I tell my customer to go the TFS route, which in itself isn't a terrible thing, I wanted to evaluate the alternatives. I know Subversion is often suggested for its configuration management/source control, but what about the other areas? Would a combination of Subversion/NUnit/Wiki/CruiseControl/NAnt/something else satisfy all of these requirements? What tools do I need to include in my evaluation? Or should I just bite the bullet and go with TFS since we're already invested in the Microsoft stack?

    Read the article

  • Mounting NAS share: Bad Address

    - by Korben
    I've faced to the problem that can't solve. Hope you can help me with it. I have a storage QNAP TS-459U, with it's own Linux, and 'massive1' folder shared, which I need to mount to my Debian server. They are connected by regular patch cord. Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet, eth1 is for QNAP. So, I'm saying this: mount -t cifs //169.254.100.100/massive1/ /mnt/storage -o user=admin , where 169.254.100.100 is an IP of QNAP's interface. The result I get (after entering password): mount error(14): Bad address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Tried: mount.cifs, smbmount, with '/' at the end of the network share and without it, and many other variations of that command. And always its: mount error(14): Bad address Funny thing is when I was in Data Center, I had connected my netbook to QNAP by the same scheme (with Fedora 16 on it), and it connected without any problems, I could read/write files on the QNAP's NAS share! So I'm really stuck with the Debian. I can't undrestand where's the difference with Fedora, making this error. Yeah, I've used Google. Couldn't find any useful info. Ping to the QNAP's IP is working, I can log into QNAP's Linux by ssh, telnet on 139's port is working. This is network interface configuration I use in Debian: IP: 169.254.100.1 Netmask: 255.255.0.0 The only diffence in connecting to Fedora and Debian is that in Fedora I've added gateway - 169.254.100.129, but ping to this IP is not working, so I think it's not necessary at all. P.S. ~# cat /etc/debian_version wheezy/sid ~# uname -a Linux host 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux ~# smbtree WORKGROUP \\HOST host server \\HOST\IPC$ IPC Service (host server) \\HOST\print$ Printer Drivers NAS \\MASSIVE1 NAS Server \\MASSIVE1\IPC$ IPC Service (NAS Server) \\MASSIVE1\massive1 \\MASSIVE1\Network Recycle Bin 1 [RAID5 Disk Volume: Drive 1 2 3 4] \\MASSIVE1\Public System default share \\MASSIVE1\Usb System default share \\MASSIVE1\Web System default share \\MASSIVE1\Recordings System default share \\MASSIVE1\Download System default share \\MASSIVE1\Multimedia System default share Please, help me with solving this strange issue. Thanks before.

    Read the article

  • vSphere Client vCenter Template Customization Specification Using Windows Sysprep Unattended Answer XML File

    - by Brian
    I'm trying to setup a vSphere Client vCenter v5.0.0 Build 455964 Template Customization Specification using a Windows Sysprep unattended answer XML file for Win2008R2. However I didn't know how Sysprep worked before attempting this so it was a time-consuming nightmare (even after reviewing VMware vSphere ESXi 5's documentation)! I think I've figure out what I'm supposed to be doing, but it's still not working. The biggest problem at this point is that vSphere Client vCenter Customization Specification IP address information is not sticking when I load a Sysprep XML file with just 1 basic setting! This can only be a bug. Here is the process I'm using: PROCESS for Windows - vSphere Client Install Windows OS install VM Tools customize Windows (GPOs can be used to do this after deployment) install Applications (GPOs can be used to do this after deployment too) shutdown the VM convert the VM to a template create a custom Windows Sysprep XML answer file with desired customizations View Management Customization Specifications Manager create "New" Specification for "Target Virtual Machine OS" select Windows check "Use Custom Sysprep Answer File" (ADDS: Custom Sysprep File. KEEPS: Network (IP), Operating System Options (SID, Sysprep /generalize). REPLACES: Registration Information of Owner Name & Organization, Computer Name, Windows License (Key), Administrator Password, Time Zone, Run Once, Workgroup or Domain) name it as "VMwareCS-OS####R#x32/64w/Sysprep-TEST" (CS=Customization Specification) set Description as "Created YYYY/MM/DD by FLast" NEXT import a Sysprep answer file from secure location NEXT Custom settings NEXT click "..." box to right of "Use DHCP" set "Use the following IP settings:" for "IP Address" fill out the first 2 octets set appropriate values for other 2-3 fields set DNS server addresses OK NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish View Inventory VMs and Templates right-click previously completed template Deploy Virtual Machine from this Template provide the new OS name (max15char) select inventory location NEXT select Host/Cluster (wait for validation to succeed) NEXT select Resource Pool (wait for validation to succeed) NEXT select Storage location NEXT check "Power on this virtual machine after creation" select "Customize using an existing customization specification" select desired specification select "Use the Customization Wizard to temporarily adjust the specification before deployment" NEXT NEXT Custom settings? NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish Finish. I know a community member named "brian" (http://serverfault.com/users/25904/brian) has worked with this scenario before, but I couldn't figure out how to contact him directly, so Brian if you see this message could you provide some information to help? Thanks, Brian

    Read the article

  • OS X: Finder error -36 when using SMB shares on a Samba server bound to AD

    - by Frenchie
    We're looking at deploying SMB homes on Debian (5.0.3) for our mac clients rather than purchasing four new Xserves. We've got our test servers built and functioning properly. Windows clients behave perfectly, but we've run into an issue with OS X (10.6.x and 10.5.x). We're going this route instead of Windows file servers due to a whole bunch of other issues that arise when going that way. Specifically, when mounting a SMB share with unix extensions switched on and the remote server bound to AD, the finder cannot save files on the share, instead touching the file and then bombing out with a -36 IO error, folder creation is fine. Copying files in the terminal behaves fine and the problem seems to be limited to the finder. The issue arises (I think) as the remote UID/GID is passed across when using unix extensions. OS X uses its own winbind idmap (odsam) to work out the effective UID/GID from AD users and groups whilst we're using a rid map on the server. Consequently, there is a mismatch in ownership which the finder chooses to honour. How OS X appears to handle this is to use the remote uid and gid at the file permission level (see below) and then set an OS X acl granting the local uid/gid to have the appropriate permissions on the file. I think the finder touches the file (which the kernel allows because of the ACL) and then checks the filesystem perms and drops out with the IO error. On a Client fc-003353-d:homes2 root# ls -led test/ drwx------+ 2 135978 100513 16384 Feb 3 15:14 test/ 0: user:jfrench allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit 1: group:ARTS\domain users allow 2: group:everyone allow 3: group:owner allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 4: group:group allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 5: group:everyone allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit We've tried the following without any luck: Setting the Linux side file owner to match the OS X GID/UID Adding ACLs on the linux filesystem which grant the OS X GID/UID perms Disabling extended attributes Setting steams=no in /etc/nsmb.conf on the client We're currently running a workaround which is to just turn off unix extensions which forces the macs to just mount the share as the local user with u=rwx perms. This works for most things but is causing a few apps that expect certain perms to break in subtle ways. Worst case scenario is that we'll continue running in this way but we would like to have the unix extensions on. Regards. Relevant SMB config below: [global] workgroup = ARTS realm = *snip* security = ADS password server = *snip* unix extensions = yes panic action = /usr/share/panic-action %d idmap backend = rid:ARTS=100000-10000000 idmap uid = 100000-10000000 idmap gid = 100000-10000000 winbind enum users = Yes winbind enum groups = Yes veto files = /lost+found/aquota.*/ hide files = /desktop.ini/$RECYCLE.BIN/.*/AppData/Library/ ea support = yes store dos attributes = yes map system = no map archive = no map readonly = no

    Read the article

  • DNS entries for OCS 2007 R2 basic deploy

    - by Anero
    I'm doing a test deploy on a Lab with 3 VMs: TEST-DC: DC / DHCP / DNS / Root CA (Joined to TEST.AD Domain) TEST-CS: OCS Front End (Joined to TEST.AD Domain - IP: 10.0.128.1) TEST-EDGES: OCS Edge Server (Joined to Workgroup: EDGE-WKG - Internal IP: 10.0.128.3, External IPs: 192.168.129.12 - Access Edge Server, 192.168.129.13 - Web Conferencing, 192.168.129.14 - A/V) I can login with the Communicator Client from within computers in the domain (using [email protected]) and even the Automatic Sign-In works as expected. Nevertheless, I cannot login neither from within machines in the domain nor from outside the domain using [email protected]. I'm pretty sure it is a DNS related issue, so I'm including below a list of the entries. DNS Entries on TEST-DC: Forward Lookup Zones TEST.AD sip.test.ad (Host A). IP Address: 10.0.128.1 sipinternal.test.ad (Host A). IP Address: 10.0.128.1 sipexternal.test.ad (Host A). IP Address: 10.0.128.3 _sipinternaltls._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipinternal.test.ad _sipinternal._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipinternal.test.ad _sip._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipexternal.test.ad _sipfederationtls._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipexternal.test.ad _sip._tls.test.ad (Service Location SRV). Port: 443. Host: sipexternal.test.ad TEST.COM sip.test.com (Host A). IP Address: 10.0.128.1 sipinternal.test.com (Host A). IP Address: 10.0.128.1 sipexternal.test.com (Host A). IP Address: 10.0.128.3 _sipinternaltls._tcp.test.com (Service Location SRV). Port: 5061. Host: sipinternal.test.com _sipinternal._tcp.test.com (Service Location SRV). Port: 5061. Host: sipinternal.test.com _sip._tcp.test.com (Service Location SRV). Port: 5061. Host: sipexternal.test.com _sip._tls.test.ad (Service Location SRV). Port: 443. Host: sipexternal.test.ad Validation Errors OCS Front End Edge Server I ran the OCS 2007 Automatic Sign-In Troubleshooting and all DNS entries for both TEST.AD and TEST.COM are reported to be OK. What am I missing?

    Read the article

  • Active directory integration not working properly with winbind and samba

    - by tubaguy50035
    I'm trying to get my linux box to use active directory authentication. I believe I have almost everything setup correctly. I'm able to issue wbinfo -g and wbinfo -u and see all the groups and users respectively. Brief intro to my setup: The username I use on my linux box to do admin things is nick. My active directory username is nwalke. They have two different passwords. I am able to log in to the box with nick and that user's password and I'm also able to login as nwalke with nwalke's password. The curious bit: Upon creating the active directory user's home directory, I run a script that requires root access. This is to setup some system wide things like a samba share for them. When I log in as nwalke, I enter my nwalke password and it succeeds. I'm then greeted with [sudo] password for nick:. If I enter my nwalke password here, it says Sorry, try again.. If I enter nick's password, it says Sorry, user nick is not allowed to execute scriptname as root. If I do groups as nwalke, I see that magically my user has been given the group nick. Now, I accidentally thought that nick had a UID of 100, not 1000. So originally in my smb.conf I had idmap uid 1000-10000. The only thing I can think of, is that I logged in with nwalke while that was still set and now I'm just being presented with a UID of 1000 forcing linux to think I'm nick. I'm not really sure where to go from here. Like I said, I'm fairly certain active directory is communicating with my server properly, but something must not be mapped right on the linux side. Any thoughts? Here is my smb.conf: [global] security = ads netbios name = hostname realm = COMPANY.COM password server = adshost.company.com workgroup = COMPANY idmap uid = 10000-90000 idmap gid = 10000-90000 winbind separator = + winbind enum users = no winbind enum groups = no winbind use default domain = yes template homedir = /home/%D/%U template shell = /bin/bash client use spnego = yes domain master = no load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes Let me know if more information about something is required.

    Read the article

  • Event ID 17890 (A significant part... paged out.) with SQL Server 2008

    - by Godeke
    I have a machine that has SQL Server 2008 Standard installed. Periodically (about once an hour) I am getting Event ID 17890 several times in a row. An example: 6:28:54 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 10652, committed (KB): 628428, memory utilization: 1%%. 6:34:27 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 332 seconds. Working set (KB): 169780, committed (KB): 546124, memory utilization: 31%%." 6:38:55 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 600 seconds. Working set (KB): 245068, committed (KB): 546124, memory utilization: 44%%." This pattern repeated at 7:26 - 7:37, 8:26 - 8:36, 9:24 - 9:35 and so with the same increasing working set and memory utilization pattern. I don't have any (known) background tasks running at this time. Backups run at 2:00 This subsided from 11:00 at night until it resumed at 4:00 in the morning and has been continuing the intermittent 10 minute glitch periods. As this server has plenty of RAM (the commit charge has peaked at 2,871,564 of 4,194,012 physical) I disabled the paging files after reading several items I dug up searching Google and not finding any of them changing the situation. This pattern I am documented is after removing the paging files, so I'm not even sure where we are paging the SQL process could be going. I also changed the SQL process memory to have a minimum of 500MB and a maximum of 2GB of RAM (as this is a light duty database server serving only a small workgroup). Has anyone encountered this? Prior to disabling the page files this error would cause 5 minutes of disk thrashing that disabled access to the databases, files, IIS webs and so on. Since disabling the page files it just logs strange things, but I'm not seeing a performance drop at least. Any suggestions would be welcome.

    Read the article

  • Server 2008/Windows 7/Samba Unspecified error 80004005

    - by ancillary
    I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

    Read the article

  • How to keep group-writeable shares on Samba with OSX clients?

    - by Oliver Salzburg
    I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

    Read the article

< Previous Page | 11 12 13 14 15 16  | Next Page >