Search Results

Search found 5756 results on 231 pages for 'cpu utilization'.

Page 150/231 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• MySQL Locking Up

  - by Ian

  I've got a innodb table that gets a lot of reads and almost no writes (like, 1 write for every 400,000 reads approx). I'm running into a pretty big problem though when I do INSERT into the table. MySQL completely locks up. It uses 100% cpu, and every single other table (in other databases even) have their statuses set to "Locked" until the INSERT is done. This is a big problem because MySQL stays locked up for up to 4 minutes. I'm using version 5.1.47 (rpm from mysql.com). Any ideas?

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• How to know if my nginx is in good health?

  - by Howard

  I am running a nginx on EC2 (m1.small) for SSL termination. I am using 2 workers on Ubuntu, with latest nginx (stable), the network throughput is around 2Mbps and system load average is around 2 to 3. I am wondering if this system is in good health for now, e.g. what is the queue length (I know nginx can handle a lot of concurrent request, but I mean before the request is being served, how many of them need to wait before being served) what is the average queue time for a given request to be served. I want to know because if my nginx is cpu bounded (e.g. due to SSL), I will need to upgrade to a faster instance. My current nginx status Active connections: 4076 server accepts handled requests 90664283 90664283 104117012 Reading: 525 Writing: 81 Waiting: 3470

  Read the article

• Virtualbox and getting the Locked VT-x Error when trying to use more than 1 processor on the session

  - by Dave

  I have installed the latest version of virtualbox onto my Hewlett Pakard (h8-1170uk) I have a intel i7 2600 cpu and 8 gb of ram I can get virtual box to create several sessions of different operating systems at the same time, but whenever i try to get 1 session to open up using more than 1 processor option select ( i wanted one of my session access to 2 processors ) i keep getting this error message VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have search many times and cannot find a option to correct this. I have check my BIOS and there are no options about VT-x or Virtualisation or anything. Am i doing something wrong ? Why does Virtualbox run fine when just using the 1 processor option ?

  Read the article

• Why do some software not get load balanced even when there are multiple cores?

  - by Nav

  While VTune Analyzer was running on a blade server with 8 cores, I observed the cpu useage percentage using mpstat -P ALL 1. mpstat showed me that VTune was taking up 100% of a single core, while all other cores were idle. Why does that happen? Shouldn't the OS (RHEL Server 5.2) automatically distribute load across cores? The same happened when I tried running MATLAB (even after enabling multithreading support in the MATLAB settings). p.s: I'm a developer. Not a sys admin. So felt it better to ask here rather than at serverfault.

  Read the article

• Active Directory Profile Slows down machine

  - by boburob

  I have a strange issue with an Active Directory profile. When the user logs onto a machine with his profile, the whole machine becomes incredibly slow and unresponsive, with programs hanging and taking an age to load everything. If I log into the same machine with any other profile nothing happens. I took a look at his original profile, any start up programs, login scripts, etc and could not see what could be causing this. The machine is not running out of memory or CPU. Nothing strange is appearing in the event log and I can see nothing running under his profile which may cause this. So I created the user a new profile to test this on and exactly the same thing happens on the first login. The only thing which would of been carried across is the security groups the user is assigned to, yet I have other users with the same groups who do not experience these issues so I am now at a complete loss on where to go next!

  Read the article

• Amazon EC2- many micro-instances vs single small/medium instance

  - by shashankaholic

  I have a chat application using stack of Openfire, Tomcat6 and MySQL. Currently, i have installed all these servers on single Linux micro-instance(613 MB memory). Even in low user base 10-20 i am encountering CPU overload which is quite obvious here. As, i am new to Amazon EC2 can somebody suggest me how to scale up my architecture according to traffic use? should i use separate micro instances for every app server(openfire,mysql,tomcat6) should i use single small or medium instance for whole server stack. Some factors in context: high reliance on MYSQL high memory usage due to file transfer web-application interacting with other Amazon service like S3,SES

  Read the article

• How do I tell if my Windows server is swapping?

  - by churnd

  I'm using Process Explorer to monitor my windows server while it reconstructs some data. It's primarily a CPU intensive process, but I want to make sure it's not swapping. How can I tell if it is using Process Explorer? My initial guess is in the System Information window, it's Paging File Write Delta. Yes? No? I'm an idiot? *Screenshot is not of the server... just an example.

  Read the article

• How to configure an ASUS motherboard.

  - by Absolute0

  I have an ASUS P7P55-M motherboard running with an Intel Core i5-750 processor and 4 GB RAM with 1600 MT/s speed. For some reason the default settings of the motherboard make all the components run at half their optimums. I have switched to the "D.O.C.P." profile and supposedly everything is as it's supposed to be (verified with CPU-Z). There is also an "X.M.P." profile and a manual one. Are either of the DOCP or XMP safe to go with? I wouldn't use the manual mode as I would likely mess something up real bad. XMP seems to be more memory oriented.

  Read the article

• Server monitoring for medium scale UNIX network

  - by nbartolomeo

  I'm looking for suggestions for a good monitoring tools, or tools, to handle a mixed Linux (RedHat 4-5) and HPUX environment. Currently we are using Hobbit which is working reasonably well but it is becoming harder to keep track of what alerts are sent out for what servers. Features I'd like to see: Easy configuration of servers. The ability to monitor CPU, network, memory, and specific processes I've looked into Nagios but from what I have seen it won't be easy to set up the configuration for all of our servers ~200 and that without installing a plugin into each agent I won't be able to monitor processes.

  Read the article

• laptop suddenly became very slow

  - by Ieyasu Sawada

  I have a compaq laptop. And I've been using it 2 years now. Then this day, it suddenly became very slow. It almost took 5 minutes from turning on to the log on screen. I click my username and it took 3 minutes to show the desktop. I click on my computer then properties to see if it is still showing 2 Ghz for the Core 2 duo processor. And 2gb for the memory. It took 10 minutes for all the information to show up. And its still 2gb and 2Ghz. So I may conclude that this is not a problem in memory or cpu. Its still running perfectly last night. And I have not seen signs of it failing. Things I already tried: Rebooting Shutdown then turn on again So how do I determine what causes this problem? How do I fix it?

  Read the article

• How can I optimize ubuntu desktop to run my webserver

  - by Parry

  Hi, I am using ubuntu desktop edition to run My drupal website on Intranet. I know for running web servers best thing to install is ubuntu server editions, but due to some problem i am using Desktop edition. I installed XAMPP on my machine an my website is up and running. I want to know how can i optimize my machine?? Since I will not use very less features of desktop editions are there any things which I can remove or stop which will free memory and cpu consumption, are there any packages which i should install to increase the performance of my ubuntu??

  Read the article

• Intel HD 4000 and Nvidia GT 650 working together on laptop

  - by Juan

  My new win7 Acer notebook has i5 CPU with Intel HD 4000 and Nvida GT650 GPU. Obviously monitor is plugged to Intel HD. In Nvidia control panel I can configure PhysX but that doesn't help. Windows system rating shows high gaming experience and average/low windows aero experience. What does that mean? Does my laptop use nvidia for games/3d apps nad Intel HD 4000 for aero? Should I disable Intel HD in bios, but how to plug monitor to nvidia? Or should I leave everything like now because everything works as it suppose to work? Here is image capture of some states: http://oi47.tinypic.com/34p0qp4.jpg

  Read the article

• Is mumble safe (privacy wise)?

  - by AnonymousLurker

  When chatting on IRC, it is possible to leak data like OS, CPU type if the IRC client happens to leak it in VERSION string. Anybody doing /CTCP VERSION can see it. Same about timezone (/CTCP TIME). This can be mitigated by turning replies to CTCP queries off. Also, IP address is leaked to others (/whois nickname will show it if it's not cloaked). By analogy, does the mumble client expose such sensitive data to others that are connected to the same server? If it does, what are the ways to mitigate this?

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Setting up Ubuntu Server for hosting Java web applications

  - by Denis Hoss

  I'm trying to set up an Web Server running Ubuntu server to host some Java web applications, with MySQL running on it, an so on .. here is the tutorial I follow: perfect server ubuntu 11.10 The server configuration is: CPU S1155 INTEL Pentium G850 2.9GHz VGA 5GTs 3MB 65W MB Gigabyte GA-H77-D3H Ram 4x4Gb HDD 5x1TB Seagate (4 in RAID5 and 1 for Backup) The problem is that when I am trying to install the Server version of Ubuntu, when the installer asks me whether to activate ATA RAID Devices, and I click yes, he sees only that one, if I click no, he sees all 5 HDD's separate without any RAID, is this normal? I also tried to install the Desktop version on RAID5, but after restart, Ubuntu does't want to boot up, an underscore stands on the top of the screen. I am a newbie in servers and their configuration, in fact I am developer. I need a help from you guys.

  Read the article

• ASA Slow IPSec Performance

  - by Brent

  I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremly poor performance when traffic passes over the VPN. CPU on the device is 13%, Memory at 408 MB, and active VPN sessions 2 so the load on the device is particularly low. Screenshot of wireshark file transfer between the two hosts over the VPN: The large amount of Header checksum failures is alarming, but I am not sure what to check now. I perf is showing around 4-5 Mbit/sec with differing TCP window sizes. Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

  Read the article

• "Cannot allocate memory" while no process seems to be using up memory

  - by omat

  I am not competent on server issues, any help is much appreciated. When try to start a python/django shell on a linux box, I am getting OSError: [Errno 12] Cannot allocate memory. free -m seems to confirm I am out of memory: total used free shared buffers cached Mem: 590 560 29 0 3 37 -/+ buffers/cache: 518 71 Swap: 0 0 0 But I cannot see what is eating up the memory with top or ps aux: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 20 0 24336 908 0 S 0.0 0.2 0:00.68 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:04.85 ksoftirqd/0 How can I identify the leak? Thanks. BTW, I am not sure if it is relevant, but the machine I am talking about is an AWS EC2 instance with Ubuntu 12 running.

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• Intuitive view of what's using the hard drive so much on Windows 7?

  - by Aren Cambre

  Sometimes my hard drive usage is near 100%, and I have no idea what is causing it. Are there any utilities that can help diagnose excessive hard drive usage and have as intuitive of an interface as Task Manager's Processes tab, which I can sort by CPU usage? I am aware of using procmon, of adding columns to Task Manager's Processes tab like I/O Read Bytes and I/O Write Bytes, and using Resource Monitor's Disk tab. Too often, these don't give me useful information or clearly identify a single process that is hogging the disk.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >