Search Results

Search found 5662 results on 227 pages for 'processor socket'.

Page 150/227 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• Enabling openssl With PHP/nginx

  - by reefine

  I'm getting the following error when trying to connect to SMTP + SSL through PHP using nginx + PHP 5, Could not connect to smtp host 'ssl://smtp.gmail.com' (5) (Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP?) In phpinfo I see: OpenSSL support disabled (install ext/openssl) This leads me to believe I've installed OpenSSL incorrectly. I've read a bunch of places where I should uncomment the following line: extension = php_openssl.dll This line does not exist so I added it to the end of my php.ini to no avail. The php_openssl.dll file does not exist anywhere on my server.

  Read the article

• Why won't Windows use the other CPU cores?

  - by revloc02

  In Windows Task Manager the Performance tab shows the first CPU maxed out, the other 7 just idling along with the occasional spike. What gives? More info: I've got 8GB and only 4.5GB are being used. The Processes tab has no indication of any process hogging processing power. In fact System Idle Process is 98-99. When I program stuff and have like 8 to 12 applications going (several directly unrelated to programming of course) my computer slows to a crawl. Sysyem Info: Intel Core i7-2600K Processor (quad-core with hyper-threading), 8GB RAM, Intel BOXDZ68BC LGA 1155 Motherboard, 500GB HDD

  Read the article

• Getting console2 to work nicely with UAC

  - by Merlyn Morgan-Graham

  I would like to get console2 to work nicely with UAC Particular problems I would like to tackle: If I start non-elevated, have a way to elevate while running. It'd be especially nice if I could elevate individual tabs I would like to get different coloring for admin/non-admin, similar to: this link. Basically, if I can get the console to execute a command on startup (similar to the HKLM\Software\Microsoft\Command Processor\AutoRun registry value), that's all I need How do I get this working? Would I have to modify source code to get this to work, or can I use different tab settings/do hacks w/ shell executables? I am using Windows 7, although I would imagine any working solution would also work on Vista.

  Read the article

• what to use instead of laptop-mode?

  - by playcat

  hello, i have ubuntu 10.10 64bit on hp 6735s (turion processor). it overheats, and i'm forced to use turion power control in order to keep core temperature to a reasonable level. one more measure that i use is putting my processors to conservative mode. that way, i'm perfectly happy with its performance, and heat is where it should be. however, after my latest upgrade, something happened - cores are back to ondemand by default, and i'm not sure if turionpowercontrol is working any more (ps axu | grep urion shows no process). in addition, i read somewhere that laptop-mode uses hdd spindown for preserving data/energy, and that hdds have only a limited amount of those spindowns, so laptop-mode usage can actually shorten the life of my hdd. i'm wondering if there is a good way to set my cores to automatically go to conservative mode? also, what's the good way to see what is the voltage my cores use? on windows i use cpuz tools. thx and sorry for the long explanation.

  Read the article

• Intel T5600 to upgrade T5250

  - by galets

  I want to upgrade my laptop which has T5250 CPU with a T5600 CPU to support virtualization. I ordered T5600 on ebay, but it didn't fit. It says T5250 supports PPGA478 socket, so I assume that is what I have. T5600 says supports "PBGA479, PPGA478". Since T5600 didn't fit as a replacement, I assume it means there are 2 models of T5600, one supports PBGA479, another one supports PPGA478, and not like I thought - one CPU supports both. Is that a correct statement? Does anybody know if it's even possible to do such an upgrade, or I'm wasting time?

  Read the article

• SQL Server 2005/2008 Licensing Decision

  - by Hakim

  Hello, I have purchased a dedicated server from a reputable Hosting company. They only have Windows Server 2008 OS installed on it and NO Sql server. Server Configuration is Intel Dual core Processor with 2GB of RAM and 100GB HDD. I wanted to host my web services on that server which will be using the MS SQL Server 2005 at the backend.There are multiple web services and each using a different Database. Microsoft has CAL basis Licensing , Which I understand is based on number of users accessing the database directly ( I may be wrong ) . But my users will be accessing the webservice and no direct connection to the database as such. Yes but the number of users accessing the web server cannot be known and is not under my control. Which Licensing is best suited for this kind of setup ? I don't need analysing and BI services right now ,but i may want to upgrade that in future may be. Any help will be appreciated. Thanks

  Read the article

• Is it possible to run a "Windows Server 2008 R2 SP1 Hyper-V Virtual Machine" on Windows 7x64 Pro machine?

  - by tbone

  Specifically, I want to run this: http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 This download contains a three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. System requirements Supported operating systems: Windows Server 2008 R2 Additionally you will need: •Windows Server 2008 R2 (SP1 recommended) with the Hyper-V role enabled. •Drive Formatting: NTFS •Processor: Intel VT or AMD-V capable •RAM: 8 GB or more recommended •Hard disk space required for install: 100 GB ------------------------- So, the above text seems to indicate that you need a physical Windows 2008 Server (r2) server running, but from the googling I've done on the subject I've yet to come across a discussion that definitively answers the question. Many posts I've read seem to indicate it might be possible to run it on Windows 7 using one of the following: VirtualBox, Windows Virtual PC, VMWare but I'm not entirely sure.

  Read the article

• Can I run virtualized 64-bit Operating Systems if my CPU doesn't support VT-X?

  - by tintinmj

  I have installed VMWare 10.0 workstation on my Compaq CQ60-615DX laptop. The Operating System is Windows 7 Home Premium. When I tried to run Ubuntu 14.04 64-bit in a virtual machine in VMWare I get an error saying: This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x. For more detailed information, see http://vmware.com/info?id=152. So I googled and found that I have to enable Intel VT-x. But I found out that my processor doesn't support Intel® Virtualization Technology (VT-x). So am I doomed and can I never run any virtual OS on my laptop? Or can I run 32-bit OSes?

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• SQL server could not connect: Lacked Sufficient Buffer Space...

  - by chumad

  I recently moved my app to a new server - the app is written in c# against the 3.5 framework. The hardware is faster but the OS is the same (Win Server 2003). No new software is running. On the prior hardware the app would run for months with no problems. Now, in this new install, I get the following error after about 3 days, and the only way to fix it is to reboot: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.) I have yet to find a service I can even shut down to make it work. Anyone had this before and know a solution?

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• Prioritize file sharing performance in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• Poor TCP loopback throughput on Windows

  - by Yodan Tauber

  I measured the throughput of a locally bound TCP socket connection on my computer (Intel Q9550, 64 GB RAM, Windows XP 64 bit) using iperf. I got dissatisfying results (around 1.6 Gbit/s) each time, no matter how I tweaked the TCP settings (buffer length, window size, max segment size, no delay). I got similar results when I tried netperf. Now, I understand (from sources like these) that the average throughput of a loopback connection should be around 5 Gbit/s. What could be the reasons for such poor performance?

  Read the article

• Can the onborad LAN cause computer shutdown

  - by user1146320

  I have P4 processor with nvidia card. Now if i don't connect to internet then my computer stays on for as much i can like 4-5 days. But if i plug in the ethernet wire. Do some surfing and leave computer as it is. Then computer fails. I mean The display on screen gets off Looks like something stopping the power supply to Harddisk. But motherboard stays on , FAN is still running , i can eject CD drive as well. But no display on monitor. I have to turn off and then turn on again. I tried formatting windows XP but again same problem

  Read the article

• TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot

  - by Tibi

  TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot. When i start my laptop (Acer TravelMate 2410). after the starting memory check, the screen goes full black, and a message appears for about 3 seconds: Warning! Password locked: Fixed disk0 and after that, disappears, and next message comes out: Operating System Not Found and all stops here. Windows Xp was installed on it, before this came. TrueCrypt cd (witch was made during the process of full encryption) is not working, not in restoring MBR, no even in decrypting my drive - completely useless. Note: I detected some short of boot sector errors (i dont know the amount) on my drive before this happened. Please, i would greatfully thank every comment, or suggestion, because my computer is unusable now. The HDD is a Samsung HDD, 160Gb. Other preferences: Acer TravelMate 2410 Notebook, 2 Gb RAM, 1500 Mhz Intel Celeron M processor. Regards

  Read the article

• What are those CPU control panel softwares called?

  - by Tim

  My computer is running an AMD Phenom II quad core CPU but it didn't come with the piece of software that I see people have in a lot of youtube videos. The software is kind of like the ATI catalyst control center but for the AMD processor instead. It shows things like current core temperature, clock speed, etc and I am not sure but maybe it also allows the user to make changes to those things from the control center as well. I am having a hard time finding the download for this online, especially since I don't even have the name for it.

  Read the article

• Windows 7 install crashes

  - by Alan Whitelaw

  I have a strange case that I cannot install windows 7 or windows vista on my 3 year old PC. The machine is an MSI K9NGM, with an AMD AM2 processor. I have bought a new Samsung SATA drive to install Windows 7 on, so as to preserve my existing XP install which I intend to dual boot in the future. However about half way through either a vista or w7 install (just after the mouse is shown for the first time, after the first restart) the machine will crash with a blue screen. I have removed, reordered the memory in the machine, with no luck. Does anyone have any experience of why this would happen with BOTH vista and w7 when everything is fine with XP?

  Read the article

• Setting CPU cores off-limits to all threads not specified (preferably in Windows 7)

  - by Shinrai

  I have a really specific machine configuration in the works that would really be helped out if there were any way to do this...basically what I'm looking for is the opposite of setting CPU Affinity for a process. I want to be able to tell Windows "No applications except [x] are allowed on [these cores]." Is there any mechanism whatsoever for doing this? (Yes, I am aware of some of the potential issues this could cause and I normally would never fool with processor affinities, since the OS usually does a damned good job itself, but this is a pretty odd situation involving some software that is very CPU-bound constantly having to wait on interrupts and DPCs and things from other threads.)

  Read the article

• Hardware question re Hauppauge WinTV-HVR 900 HD video/tv capture unit used with laptop with HDMI output laptop HDMI connection

  - by Bill

  I've ordered a Hauppauge WinTV-HVR 900 HD video/tv capture unit. It is mainly for use with my HP desktop running Windows 7 Professional, but I will want to use it occasionally with my partner's HP laptop running Vista Home Premium. The latter has an HDMI output which works perfectly with my LG 42" LCD TV, enabling display of BBC iPlayer and other catchup services. Will the live or recorded HD signal from the WinTV-HVR 900 HD connected to the laptop's USB input be output on the laptop's HDMI socket as HD? Come to that, will SD content be output? The reason I ask is that I had a problem with a Pinnacle unit which displayed OK on the laptop's screen but not on the TV screen (which did display all the normal Windows material). I've tried the Hauppage website, but it doesn't even acknowledge the existence of the WinTV-HVR 900 HD!

  Read the article

• FPS lags with new acer aspire 5755G

  - by Calvin

  The title is kind of self explanatory, as my new laptop lags and has FPS drops. For example my FPS in Starcraft 2 hovers around 20 and constantly drops to 1 with low settings when I know it should run smoothly in high settings. I've updated my Nvidia driver, and set the preferred global settings to the 'High-performance Nvidia processor'. Here are some screen shots. Screen Shot One - Screen Shot Two - Screen Shot Three I'm not sure how to fix this problem, any feed back would be nice!

  Read the article

• Connect to my virtualbox mysql server

  - by WebweaverD

  I wonder if someone here could help me, this is my set up: I am on a windows 7 machine running a ubuntu virtualbox as my local web server and database server (mysql). I have just got hold of a copy of Komodo which i am running on my windows machine which I would like to hook up to my database. The fields it needs are hostname, port, socket, username and password. I know the username/password but am unsure how to find out what to put for the other fields. The ubuntu vb has an ip of 192.168.0.10, which is in my hosts file as http://swishprint.dev I hope I have asked this in the right place, any help much appreciated.

  Read the article

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Force Windows 8 Metro apps to run lower resolutions below 1024x768?

  - by piokuc

  I have installed Windows 8 Consumer Preview on my Samsung NB30 netbook. I was very excited to try it on this little box cause it has a touchscreen and Windows 8 is supposed to be optimized for touchscreen devices. The installation was quick and smooth and all the drivers seem to work well including the one for the touchscreen. There is one major problem, though: when I try to tap one of the tiles on the Metro UI it displays This app can't open. The screen resolution is too low for this app to run. The machine has Intel Atom N450 processor and Intel GMA 3159 integrated graphics card and has maximum resolution 1024x600. I've read that Metro requires at least 1024x768. Is there a solution to this problem? Is there a way to force Windows 8 Metro apps to run in lower resolutions?

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >