Search Results

Search found 37654 results on 1507 pages for 'function prototypes'.

Page 1504/1507 | < Previous Page | 1500 1501 1502 1503 1504 1505 1506 1507  | Next Page >

  • Is it possible to pass a structure of delegates from managed to native?

    - by Veiva
    I am writing a wrapper for the game programming library "Allegro" and its less stable 4.9 branch. Now, I have done good insofar, except for when it comes to wrapping a structure of function pointers. Basically, I can't change the original code, despite having access to it, because that would require me to fork it in some manner. I need to know how I can somehow pass a structure of delegates from managed to native without causing an AccessViolationException that has occurred so far. Now, for the code. Here is the Allegro definition of the structure: typedef struct ALLEGRO_FILE_INTERFACE { AL_METHOD(ALLEGRO_FILE*, fi_fopen, (const char *path, const char *mode)); AL_METHOD(void, fi_fclose, (ALLEGRO_FILE *handle)); AL_METHOD(size_t, fi_fread, (ALLEGRO_FILE *f, void *ptr, size_t size)); AL_METHOD(size_t, fi_fwrite, (ALLEGRO_FILE *f, const void *ptr, size_t size)); AL_METHOD(bool, fi_fflush, (ALLEGRO_FILE *f)); AL_METHOD(int64_t, fi_ftell, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_fseek, (ALLEGRO_FILE *f, int64_t offset, int whence)); AL_METHOD(bool, fi_feof, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_ferror, (ALLEGRO_FILE *f)); AL_METHOD(int, fi_fungetc, (ALLEGRO_FILE *f, int c)); AL_METHOD(off_t, fi_fsize, (ALLEGRO_FILE *f)); } ALLEGRO_FILE_INTERFACE; My simple attempt at wrapping it: public delegate IntPtr AllegroInternalOpenFileDelegate(string path, string mode); public delegate void AllegroInternalCloseFileDelegate(IntPtr file); public delegate int AllegroInternalReadFileDelegate(IntPtr file, IntPtr data, int size); public delegate int AllegroInternalWriteFileDelegate(IntPtr file, IntPtr data, int size); public delegate bool AllegroInternalFlushFileDelegate(IntPtr file); public delegate long AllegroInternalTellFileDelegate(IntPtr file); public delegate bool AllegroInternalSeekFileDelegate(IntPtr file, long offset, int where); public delegate bool AllegroInternalIsEndOfFileDelegate(IntPtr file); public delegate bool AllegroInternalIsErrorFileDelegate(IntPtr file); public delegate int AllegroInternalUngetCharFileDelegate(IntPtr file, int c); public delegate long AllegroInternalFileSizeDelegate(IntPtr file); [StructLayout(LayoutKind.Sequential, Pack = 0)] public struct AllegroInternalFileInterface { [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalOpenFileDelegate fi_fopen; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalCloseFileDelegate fi_fclose; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalReadFileDelegate fi_fread; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalWriteFileDelegate fi_fwrite; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFlushFileDelegate fi_fflush; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalTellFileDelegate fi_ftell; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalSeekFileDelegate fi_fseek; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsEndOfFileDelegate fi_feof; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsErrorFileDelegate fi_ferror; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalUngetCharFileDelegate fi_fungetc; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFileSizeDelegate fi_fsize; } I have a simple auxiliary wrapper that turns an ALLEGRO_FILE_INTERFACE into an ALLEGRO_FILE, like so: #define ALLEGRO_NO_MAGIC_MAIN #include <allegro5/allegro5.h> #include <stdlib.h> #include <string.h> #include <assert.h> __declspec(dllexport) ALLEGRO_FILE * al_aux_create_file(ALLEGRO_FILE_INTERFACE * fi) { ALLEGRO_FILE * file; assert(fi && "`fi' null"); file = (ALLEGRO_FILE *)malloc(sizeof(ALLEGRO_FILE)); if (!file) return NULL; file->vtable = (ALLEGRO_FILE_INTERFACE *)malloc(sizeof(ALLEGRO_FILE_INTERFACE)); if (!(file->vtable)) { free(file); return NULL; } memcpy(file->vtable, fi, sizeof(ALLEGRO_FILE_INTERFACE)); return file; } __declspec(dllexport) void al_aux_destroy_file(ALLEGRO_FILE * f) { assert(f && "`f' null"); assert(f->vtable && "`f->vtable' null"); free(f->vtable); free(f); } Lastly, I have a class that accepts a Stream and provides the proper methods to interact with the stream. Just to make sure, here it is: /// <summary> /// A semi-opaque data type that allows one to load fonts, etc from a stream. /// </summary> public class AllegroFile : AllegroResource, IDisposable { AllegroInternalFileInterface fileInterface; Stream fileStream; /// <summary> /// Gets the file interface. /// </summary> internal AllegroInternalFileInterface FileInterface { get { return fileInterface; } } /// <summary> /// Constructs an Allegro file from the stream provided. /// </summary> /// <param name="stream">The stream to use.</param> public AllegroFile(Stream stream) { fileStream = stream; fileInterface = new AllegroInternalFileInterface(); fileInterface.fi_fopen = Open; fileInterface.fi_fclose = Close; fileInterface.fi_fread = Read; fileInterface.fi_fwrite = Write; fileInterface.fi_fflush = Flush; fileInterface.fi_ftell = GetPosition; fileInterface.fi_fseek = Seek; fileInterface.fi_feof = GetIsEndOfFile; fileInterface.fi_ferror = GetIsError; fileInterface.fi_fungetc = UngetCharacter; fileInterface.fi_fsize = GetLength; Resource = AllegroFunctions.al_aux_create_file(ref fileInterface); if (!IsValid) throw new AllegroException("Unable to create file"); } /// <summary> /// Disposes of all resources. /// </summary> ~AllegroFile() { Dispose(); } /// <summary> /// Disposes of all resources used. /// </summary> public void Dispose() { if (IsValid) { Resource = IntPtr.Zero; // Should call AllegroFunctions.al_aux_destroy_file fileStream.Dispose(); } } IntPtr Open(string path, string mode) { return IntPtr.Zero; } void Close(IntPtr file) { fileStream.Close(); } int Read(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; int read = fileStream.Read(d, 0, size); Marshal.Copy(d, 0, data, size); return read; } int Write(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; Marshal.Copy(data, d, 0, size); fileStream.Write(d, 0, size); return size; } bool Flush(IntPtr file) { fileStream.Flush(); return true; } long GetPosition(IntPtr file) { return fileStream.Position; } bool Seek(IntPtr file, long offset, int whence) { SeekOrigin origin = SeekOrigin.Begin; if (whence == 1) origin = SeekOrigin.Current; else if (whence == 2) origin = SeekOrigin.End; fileStream.Seek(offset, origin); return true; } bool GetIsEndOfFile(IntPtr file) { return fileStream.Position == fileStream.Length; } bool GetIsError(IntPtr file) { return false; } int UngetCharacter(IntPtr file, int character) { return -1; } long GetLength(IntPtr file) { return fileStream.Length; } } Now, when I do something like this: AllegroFile file = new AllegroFile(new FileStream("Test.bmp", FileMode.Create, FileAccess.ReadWrite)); bitmap.SaveToFile(file, ".bmp"); ...I get an AccessViolationException. I think I understand why (the garbage collector can relocate structs and classes whenever), but I'd think that the method stub that is created by the framework would take this into consideration and route the calls to the valid classes. However, it seems obviously so that I'm wrong. So basically, is there any way I can successfully wrap that structure? (And I'm sorry for all the code! Hope it's not too much...)

    Read the article

  • Problems with with A* algorithm

    - by V_Programmer
    I'm trying to implement the A* algorithm in Java. I followed this tutorial,in particular, this pseudocode: http://theory.stanford.edu/~amitp/GameProgramming/ImplementationNotes.html The problem is my code doesn't work. It goes into an infinite loop. I really don't know why this happens... I suspect that the problem are in F = G + H function implemented in Graph constructors. I suspect I am not calculate the neighbor F correclty. Here's my code: List<Graph> open; List<Graph> close; private void createRouteAStar(Unit u) { open = new ArrayList<Graph>(); close = new ArrayList<Graph>(); u.ai_route_endX = 11; u.ai_route_endY = 5; List<Graph> neigh; int index; int i; boolean finish = false; Graph current; int cost; Graph start = new Graph(u.xMap, u.yMap, 0, ManhattanDistance(u.xMap, u.yMap, u.ai_route_endX, u.ai_route_endY)); open.add(start); current = start; while(!finish) { index = findLowerF(); current = new Graph(open, index); System.out.println(current.x); System.out.println(current.y); if (current.x == u.ai_route_endX && current.y == u.ai_route_endY) { finish = true; } else { close.add(current); neigh = current.getNeighbors(); for (i = 0; i < neigh.size(); i++) { cost = current.g + ManhattanDistance(current.x, current.y, neigh.get(i).x, neigh.get(i).y); if (open.contains(neigh.get(i)) && cost < neigh.get(i).g) { open.remove(open.indexOf(neigh)); } else if (close.contains(neigh.get(i)) && cost < neigh.get(i).g) { close.remove(close.indexOf(neigh)); } else if (!open.contains(neigh.get(i)) && !close.contains(neigh.get(i))) { neigh.get(i).g = cost; neigh.get(i).f = cost + ManhattanDistance(neigh.get(i).x, neigh.get(i).y, u.ai_route_endX, u.ai_route_endY); neigh.get(i).setParent(current); open.add(neigh.get(i)); } } } } System.out.println("step"); for (i=0; i < close.size(); i++) { if (close.get(i).parent != null) { System.out.println(i); System.out.println(close.get(i).parent.x); System.out.println(close.get(i).parent.y); } } } private int findLowerF() { int i; int min = 10000; int minIndex = -1; for (i=0; i < open.size(); i++) { if (open.get(i).f < min) { min = open.get(i).f; minIndex = i; System.out.println("min"); System.out.println(min); } } return minIndex; } private int ManhattanDistance(int ax, int ay, int bx, int by) { return Math.abs(ax-bx) + Math.abs(ay-by); } And, as I've said. I suspect that the Graph class has the main problem. However I've not been able to detect and fix it. public class Graph { int x, y; int f,g,h; Graph parent; public Graph(int x, int y, int g, int h) { this.x = x; this.y = y; this.g = g; this.h = h; this.f = g + h; } public Graph(List<Graph> list, int index) { this.x = list.get(index).x; this.y = list.get(index).y; this.g = list.get(index).g; this.h = list.get(index).h; this.f = list.get(index).f; this.parent = list.get(index).parent; } public Graph(Graph gp) { this.x = gp.x; this.y = gp.y; this.g = gp.g; this.h = gp.h; this.f = gp.f; } public Graph(Graph gp, Graph parent) { this.x = gp.x; this.y = gp.y; this.g = gp.g; this.h = gp.h; this.f = g + h; this.parent = parent; } public List<Graph> getNeighbors() { List<Graph> aux = new ArrayList<Graph>(); aux.add(new Graph(x+1, y, g,h)); aux.add(new Graph(x-1, y, g,h)); aux.add(new Graph(x, y+1, g,h)); aux.add(new Graph(x, y-1, g,h)); return aux; } public void setParent(Graph g) { parent = g; } } Little Edit: Using the System.out and the Debugger I discovered that the program ALWAYS is check the same "current" graph, (15,8) which is the (u.xMap, u.yMap) position. Looks like it keeps forever in the first step.

    Read the article

  • Detect if 2 HTML fragments have identical hierarchical structure

    - by sergzach
    An example of fragments that have identical hierarchical structure: (1) <div> <span>It's a message</span> </div> (2) <div> <span class='bold'>This is a new text</span> </div> An example of fragments that have different structure: (1) <div> <span><b>It's a message</b></span> </div> (2) <div> <span>This is a new text</span> </div> So, fragments with a similar structure correspond to one hierarchical tree (the same tag names, the same hierarchical structure). How can I detect if 2 elements (html fragments) have the same structure simply with lxml? I have a function that does not work properly for some more difficult case (than the example): def _is_equal( el1, el2 ): # input: 2 elements with possible equal structure and tag names # e.g. root = lxml.html.fromstring( buf ) # el1 = root[ 0 ] # el2 = root[ 1 ] # move from top to bottom, compare elements result = False if el1.tag == el2.tag: # has no children if len( el1 ) == len( el2 ): if len( el1 ) == 0: return True else: # iterate one of them, for example el1 i = 0 for child1 in el1: child2 = el2[ i ] is_equal2 = _is_equal( child1, child2 ) if not is_equal2: return False return True else: return False else: return False The code fails to detect that 2 divs with class='tovar2' have an identical structure: <body> <div class="tovar2"> <h2 class="new"> <a href="http://modnyedeti-krsk.ru/magazin/product/333193003"> ?????? ?/? </a> </h2> <ul class="art"> <li> ???????: <span>1759</span> </li> </ul> <div> <div class="wrap" style="width:180px;"> <div class="new"> <img src="shop_files/new-t.png" alt=""> </div> <a class="highslide" href="http://modnyedeti-krsk.ru/d/459730/d/820.jpg" onclick="return hs.expand(this)"> <img src="shop_files/fr_5.gif" style="background:url(/d/459730/d/548470803_5.jpg) 50% 50% no-repeat scroll;" alt="?????? ?/?" height="160" width="180"> </a> </div> </div> <form action="" onsubmit="return addProductForm(17094601,333193003,3150.00,this,false);"> <ul class="bott "> <li class="price">????:<br> <span> <b> 3 150 </b> ???. </span> </li> <li class="amount">???-??:<br><input class="number" onclick="this.select()" value="1" name="product_amount" type="text"> </li> <li class="buy"><input value="" type="submit"> </li> </ul> </form> </div> <div class="tovar2"> <h2 class="new"> <a href="http://modnyedeti-krsk.ru/magazin/product/333124803">?????? ?/?</a> </h2> <ul class="art"> <li> ???????: <span>1759</span> </li> </ul> <div> <div class="wrap" style="width:180px;"> <div class="new"> <img src="shop_files/new-t.png" alt=""> </div> <a class="highslide" href="http://modnyedeti-krsk.ru/d/459730/d/820.jpg" onclick="return hs.expand(this)"> <img src="shop_files/fr_5.gif" style="background:url(/d/459730/d/548470803_5.jpg) 50% 50% no-repeat scroll;" alt="?????? ?/?" height="160" width="180"> </a> </div> </div> <form action="" onsubmit="return addProductForm(17094601,333124803,3150.00,this,false);"> <ul class="bott "> <li class="price">????:<br> <span> <b>3 150</b> ???. </span> </li> <li class="amount">???-??:<br><input class="number" onclick="this.select()" value="1" name="product_amount" type="text"> </li> <li class="buy"> <input value="" type="submit"> </li> </ul> </form> </div> </body>

    Read the article

  • MYSQL LIMIT not working as expected - Java

    - by Sirish
    I have this weird problem in java when trying to fetch records from MYSql database by using the limit function in the query. Not sure what went wrong or did wrong, this query is giving me a hard time. Issue - When I run this query through my java program it returns all the records and not limiting the records to 10 as given in the limit. The same query when ran in MYSql command line, it execute very well and fetches me only 10 recrods. Below is the java code and query. Any help or support is appreciated.! Java code - public UserVO getApplUserDetailsList(UserVO userVO) throws CAPDAOException { List<UserVO> returnList = null; String methodName = "getApplUserDetails()"; Session session = null; String queryString = null; Transaction transaction = null; PreparedStatement ps = null; ResultSet rs = null; if(userVO == null) { logger.writeToTivoliAlertLog(className, CAPConstants.ERROR, methodName, null, "userVO returned null. Busines validation error.!", null); throw new CAPDAOException("userVO returned null. Busines validation error.!",CAPException.BUSINESS_VALIDATION_ERROR_SECURITY); } try { returnList = new ArrayList<UserVO>(); System.out.println(""); String appusr = userVO.getAppUsrNm(); session = getSession(); transaction = session.beginTransaction(); if(userVO.getAppUsrRoleCd()!=null && !userVO.getAppUsrRoleCd().trim().equalsIgnoreCase(CAPConstants.DEFAULT_DROPDOWN_VALUE)){ queryString = "SELECT " + "APPL_USR_ID,APPL_USR_NM,APPL_USR_FRST_NM, " + "APPL_USR_LST_NM,ACCESS_ROLE_CD " + "FROM APPL_USR " + "WHERE " + "APPL_USR_NM LIKE ?"+ " AND APPL_USR_FRST_NM LIKE ?"+ " AND APPL_USR_LST_NM LIKE ?"+ " AND ACCESS_ROLE_CD = ?"+ " AND APPL_USR_ID != ?"; ps = session.connection().prepareStatement(queryString); ps.setString(1,userVO.getAppUsrNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(2,userVO.getAppUsrFirstNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(3,userVO.getAppUsrLastNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(4,userVO.getAppUsrRoleCd()); ps.setInt(5, 1); } else { queryString = "SELECT " + "APPL_USR_ID,APPL_USR_NM,APPL_USR_FRST_NM, " + "APPL_USR_LST_NM,ACCESS_ROLE_CD " + "FROM APPL_USR " + "WHERE " + "APPL_USR_NM LIKE ?"+ " AND APPL_USR_FRST_NM LIKE ?"+ " AND APPL_USR_LST_NM LIKE ?"+ " AND APPL_USR_ID != ?"; ps = session.connection().prepareStatement(queryString); ps.setString(1,userVO.getAppUsrNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(2,userVO.getAppUsrFirstNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(3,userVO.getAppUsrLastNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setInt(4, 1); } if(userVO.getQueryAction()!=null && userVO.getQueryAction().equals(CAPConstants.GET_DATA)) queryString += " ORDER BY APPL_USR_ID LIMIT " + userVO.getPAGE_MIN_LIMIT() + ", " + userVO.getPAGE_MAX_LIMIT(); else queryString += " ORDER BY APPL_USR_ID"; rs = ps.executeQuery(); if(userVO.getQueryAction()!=null && userVO.getQueryAction().equals(CAPConstants.GET_DATA)) { int tempCOunt = 0; while(rs!=null && rs.next()) { tempCOunt ++; UserVO returnVO = new UserVO(); returnVO.setAppUsrId(rs.getInt("APPL_USR_ID")); returnVO.setAppUsrNm(rs.getString("APPL_USR_NM")); returnVO.setAppUsrFirstNm(rs.getString("APPL_USR_FRST_NM")); returnVO.setAppUsrLastNm(rs.getString("APPL_USR_LST_NM")); if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.ADMINISTRATOR_ROLE_CD)) returnVO.setApplicationLevelRole("Administrator"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.MAINTAINER_ROLE_CD)) returnVO.setApplicationLevelRole("Maintainer"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.VIEWER_ROLE_CD)) returnVO.setApplicationLevelRole("Viewer"); else returnVO.setApplicationLevelRole("None"); returnList.add(returnVO); } System.out.println("Count >>>>>>>>>>>>>>>>>>> "+tempCOunt); userVO.setReturnListFromDB(returnList); } else { int rowcount = 0; if (rs.last()) { rowcount = rs.getRow(); rs.beforeFirst(); // not rs.first() because the rs.next() below will move on, missing the first element } userVO.setTotalRecordCount(rowcount); System.out.println("Total count of the records to be used for pagination >> "+rowcount); rowcount = 0; while(rs!=null && rs.next()) { rowcount ++; UserVO returnVO = new UserVO(); returnVO.setAppUsrId(rs.getInt("APPL_USR_ID")); returnVO.setAppUsrNm(rs.getString("APPL_USR_NM")); returnVO.setAppUsrFirstNm(rs.getString("APPL_USR_FRST_NM")); returnVO.setAppUsrLastNm(rs.getString("APPL_USR_LST_NM")); if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.ADMINISTRATOR_ROLE_CD)) returnVO.setApplicationLevelRole("Administrator"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.MAINTAINER_ROLE_CD)) returnVO.setApplicationLevelRole("Maintainer"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.VIEWER_ROLE_CD)) returnVO.setApplicationLevelRole("Viewer"); else returnVO.setApplicationLevelRole("None"); returnList.add(returnVO); System.out.println("Row count >>"+rowcount); if(rowcount == CAPConstants.PAGINATION_MAX_VALUE) break; } rowcount = 0; userVO.setReturnListFromDB(returnList); } System.out.println("returnList >>"+returnList); return userVO; } catch (Throwable e) { e.printStackTrace(); logger.writeToTivoliAlertLog(className, CAPConstants.ERROR, methodName, userVO.getAppUsrNm(), "Error occured while trying to fetch application user details. Printing stack trace to the log for analysis..", e); throw new CAPDAOException("Error occured while trying to fetch application user details.",CAPException.SPEXECUTION_ERROR_CODE); } finally{ closeTransactionAndSession(session,transaction); } } MYSQL Query - SELECT APPL_USR_ID,APPL_USR_NM,APPL_USR_FRST_NM, APPL_USR_LST_NM,ACCESS_ROLE_CD FROM APPL_USR WHERE APPL_USR_NM LIKE '%' AND APPL_USR_FRST_NM LIKE '%' AND APPL_USR_LST_NM LIKE '%' AND APPL_USR_ID != 1 ORDER BY APPL_USR_ID LIMIT 10, 10

    Read the article

  • Httpsession with Spring 3 MVC

    - by vipul12389
    I want to use httpsession in Spring 3 MVC..i have searched all the web and got this solution..at http://forum.springsource.org/showthread.php?98850-Adding-to-stuff-to-the-session-while-using-ResponseBody Basically, My application auto authenticates user by getting winId and authorizes through LDAP..(Its a intranet site) Here is the flow of the application, 1. User enters Aplication url (http://localhost:8082/eIA_Mock_5) it has a welcome page (index.jsp) Index.jsp gets winId through jQuery and hits login.html (through Ajax) and passes windowsId login.html (Controller) authenticates through LDAP and gives back 'Valid' String as a response javascript, upon getting the correct response, redirects/loads welcome page i.e. goes to localhost:8082/eIA_Mock_5/welcome.html Now, i have filter associated with it..which checks for is session valid for each incoming request..Now the problem is even though i set data on to httpsession, yet the filter or any other controller fails to get the data through session as a result it doesnt proceeds further.. here is the code..and could you suggest what is wrong actually ?? Home_Controller.java @Controller public class Home_Controller { public static Log logger = LogFactory.getLog(Home_Controller.class); @RequestMapping(value={"/welcome"}) public ModelAndView loadWelcomePage(HttpServletRequest request,HttpServletResponse response) { ModelAndView mdv = new ModelAndView(); try{ /*HttpSession session = request.getSession(); UserMasterBean userBean = (UserMasterBean)session.getAttribute("userBean"); String userName=userBean.getWindowsId(); if(userName==null || userName.equalsIgnoreCase("")) { mdv.setViewName("homePage"); System.out.println("Unable to authenticate user "); logger.debug("Unable to authenticate user "); } else { System.out.println("Welcome User "+userName); logger.debug("Welcome User "+userName); */ mdv.setViewName("homePage"); /*}*/ } catch(Exception e){ logger.debug("inside authenticateUser ",e); e.printStackTrace(); } return mdv; } @RequestMapping(value = "/login", method = RequestMethod.GET) public @ResponseBody String authenticateUser(@RequestParam String userName,HttpSession session) { logger.debug("inside authenticateUser"); String returnResponse=new String(); try{ logger.debug("userName for Authentication "+userName); System.out.println("userName for Authentication "+userName); //HttpSession session = request.getSession(); if(userName==null || userName.trim().equalsIgnoreCase("")) returnResponse="Invalid"; else { System.out.println("uname "+userName); String ldapResponse = LDAPConnectUtil.isValidActiveDirectoryUser(userName, ""); if(ldapResponse.equalsIgnoreCase("true")) { returnResponse="Valid"; System.out.println(userName+" Authenticated"); logger.debug(userName+" Authenticated"); UserMasterBean userBean = new UserMasterBean(); userBean.setWindowsId(userName); //if(session.getAttribute("userBean")==null) session.setAttribute("userBean", userBean); } else { returnResponse="Invalid"; //session.setAttribute("userBean", null); System.out.println("Unable to Authenticate the user through Ldap"); logger.debug("Unable to Authenticate the user through Ldap"); } System.out.println("ldapResponse "+ldapResponse); logger.debug("ldapResponse "+ldapResponse); System.out.println("returnResponse "+returnResponse); } UserMasterBean u = (UserMasterBean)session.getAttribute("userBean"); System.out.println("winId "+u.getWindowsId()); } catch(Exception e){ e.printStackTrace(); logger.debug("Exception in authenticateUser ",e); } return returnResponse; } Filter public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) { System.out.println("in PageFilter"); boolean flag = false; HttpServletRequest objHttpServletRequest = (HttpServletRequest)request; HttpServletResponse objHttpServletResponse = (HttpServletResponse)response; HttpSession session = objHttpServletRequest.getSession(); String contextPath = objHttpServletRequest.getContextPath(); String servletPath = objHttpServletRequest.getSession().getServletContext().getRealPath(objHttpServletRequest.getServletPath()); logger.debug("contextPath :" + contextPath); logger.debug("servletPath :" + servletPath); System.out.println("in PageFilter, contextPath :" + contextPath); System.out.println("in PageFilter, servletPath :" + servletPath); if (servletPath.endsWith("\\") || servletPath.endsWith("/") || servletPath.indexOf("css") > 0 || servletPath.indexOf("jsp") > 0 || servletPath.indexOf("images") > 0 || servletPath.indexOf("js") > 0 || servletPath.endsWith("index.jsp") || servletPath.indexOf("xls") > 0 || servletPath.indexOf("ini") > 0 || servletPath.indexOf("login.html") > 0 || /*servletPath.endsWith("welcome.html") ||*/ servletPath.endsWith("logout.do") ) { System.out.println("User is trying to access allowed pages like Login.jsp, errorPage.jsp, js, images, css"); logger.debug("User is trying to access allowed pages like Login.jsp, errorPage.jsp, js, images, css"); flag = true; } if (flag== false) { System.out.println("flag = false"); if(session.getAttribute("userBean") == null) System.out.println("yes session.userbean is null"); if ((session != null) && (session.getAttribute("userBean") != null)) { System.out.println("session!=null && session.getAttribute(userId)!=null"); logger.debug("IF Part"); UserMasterBean userBean = (UserMasterBean)session.getAttribute("userBean"); String windowsId = userBean.getWindowsId(); logger.debug("User Id " + windowsId + " allowed access"); System.out.println("User Id " + windowsId + " allowed access"); flag = true; } else { System.out.println("else .....session!=null && session.getAttribute(userId)!=null"); logger.debug("Else Part"); flag = false; } } if (flag == true) { try { System.out.println("before chain.doFilter(request, response)"); chain.doFilter(request, response); } catch (Exception e) { e.printStackTrace(); try { objHttpServletResponse.sendRedirect(contextPath + "/logout.do"); } catch (Exception ex) { ex.printStackTrace(); } } } else { try { System.out.println("before sendRedirect"); objHttpServletResponse.sendRedirect(contextPath + "/jsp/errorPage.jsp"); } catch (Exception ex) { ex.printStackTrace(); } } System.out.println("end of PageFilter"); } Index.jsp <script type="text/javascript"> //alert("inside s13"); var WinNetwork = new ActiveXObject("WScript.Network"); var userName=WinNetwork.UserName; alert(userName); $.ajax({ url : "login.html", data : "userName="+userName, success : function(result) { alert("result == "+result); if(result=="Valid") window.location = "http://10.160.118.200:8082/eIA_Mock_5/welcome.html"; } }); </script> web.xml has a filter entry with URL pattern as * I am using spring 3 mvc

    Read the article

  • mysql_query arguments in PHP

    - by Chris Wilson
    I'm currently building my first database in MySQL with an interface written in PHP and am using the 'learn-by-doing' approach. The figure below illustrates my database. Table names are at the top, and the attribute names are as they appear in the real database. I am attempting to query the values of each of these attributes using the code seen below the table. I think there is something wrong with my mysql_query() function since I am able to observe the expected behaviour when my form is successfully submitted, but no search results are returned. Can anyone see where I'm going wrong here? Update 1: I've updated the question with my enter script, minus the database login credentials. <html> <head> <title>Search</title> </head> <body> <h1>Search</h1> <!--Search form - get user input from this--> <form name = "search" action = "<?=$PHP_SELF?>" method = "get"> Search for <input type = "text" name = "find" /> in <select name = "field"> <option value = "Title">Title</option> <option value = "Description">Description</option> <option value = "City">Location</option> <option value = "Company_name">Employer</option> </select> <input type = "submit" name = "search" value = "Search" /> </form> <form name = "clearsearch" action = "Search.php"> <input type = "submit" value = "Reset search" /> </form> <?php if (isset($_GET["search"])) // Check if form has been submitted correctly { // Check for a search query if($_GET["find"] == "") { echo "<p>You did not enter a search query. Please press the 'Reset search' button and try again"; exit; } echo "<h2>Search results</h2>"; ?> <table align = "left" border = "1" cellspacing = "2" cellpadding = "2"> <tr> <th><font face="Arial, Helvetica, sans-serif">No.</font></th> <th><font face="Arial, Helvetica, sans-serif">Title</font></th> <th><font face="Arial, Helvetica, sans-serif">Employer</font></th> <th><font face="Arial, Helvetica, sans-serif">Description</font></th> <th><font face="Arial, Helvetica, sans-serif">Location</font></th> <th><font face="Arial, Helvetica, sans-serif">Date Posted</font></th> <th><font face="Arial, Helvetica, sans-serif">Application Deadline</font></th> </tr> <? // Connect to the database $username=REDACTED; $password=REDACTED; $host=REDACTED; $database=REDACTED; mysql_connect($host, $username, $password); @mysql_select_db($database) or die (mysql_error()); // Perform the search $find = mysql_real_escape_string($find); $query = "SELECT job.Title, job.Description, employer.Company_name, address.City, job.Date_posted, job.Application_deadline WHERE ( Title = '{$_GET['find']}' OR Company_name = '{$_GET['find']}' OR Date_posted = '{$_GET['find']}' OR Application_deadline = '{$_GET['find']}' ) AND job.employer_id_job = employer.employer_id AND job.address_id_job = address.address_id"; if (!$query) { die ('Invalid query:' .mysql_error()); } $result = mysql_query($query); $num = mysql_numrows($result); $count = 0; while ($count < $num) { $title = mysql_result ($result, $count, "Title"); $date_posted = mysql_result ($result, $count, "Date_posted"); $application_deadline = mysql_result ($result, $count, "Application_deadline"); $description = mysql_result ($result, $count, "Description"); $company = mysql_result ($result, $count, "Company_name"); $city = mysql_result ($result, $count, "City"); ?> <tr> <td><font face = "Arial, Helvetica, sans-serif"><? echo $count + 1; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $title; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $company; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $description; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $date_posted; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $application_deadline; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $education_level; ?></font></td> <td><font face = "Arial, Helvetica, sans-serif"><? echo $years_of_experience; ?></font></td> <? $count ++; } } ?> </body> </html>

    Read the article

  • Atmospheric scattering OpenGL 3.3

    - by user1419305
    Im currently trying to convert a shader by Sean O'Neil to version 330 so i can try it out in a application im writing. Im having some issues with deprecated functions, so i replaced them, but im almost completely new to glsl, so i probably did a mistake somewhere. Original shaders can be found here: http://www.gamedev.net/topic/592043-solved-trying-to-use-atmospheric-scattering-oneill-2004-but-get-black-sphere/ My horrible attempt at converting them: Vertex Shader: #version 330 core layout(location = 0) in vec3 vertexPosition_modelspace; //layout(location = 1) in vec2 vertexUV; layout(location = 2) in vec3 vertexNormal_modelspace; uniform vec3 v3CameraPos; uniform vec3 v3LightPos; uniform vec3 v3InvWavelength; uniform float fCameraHeight; uniform float fCameraHeight2; uniform float fOuterRadius; uniform float fOuterRadius2; uniform float fInnerRadius; uniform float fInnerRadius2; uniform float fKrESun; uniform float fKmESun; uniform float fKr4PI; uniform float fKm4PI; uniform float fScale; uniform float fScaleDepth; uniform float fScaleOverScaleDepth; // passing in matrixes for transformations uniform mat4 MVP; uniform mat4 V; uniform mat4 M; const int nSamples = 4; const float fSamples = 4.0; out vec3 v3Direction; out vec4 gg_FrontColor; out vec4 gg_FrontSecondaryColor; float scale(float fCos) { float x = 1.0 - fCos; return fScaleDepth * exp(-0.00287 + x*(0.459 + x*(3.83 + x*(-6.80 + x*5.25)))); } void main(void) { vec3 v3Pos = vertexPosition_modelspace; vec3 v3Ray = v3Pos - v3CameraPos; float fFar = length(v3Ray); v3Ray /= fFar; vec3 v3Start = v3CameraPos; float fHeight = length(v3Start); float fDepth = exp(fScaleOverScaleDepth * (fInnerRadius - fCameraHeight)); float fStartAngle = dot(v3Ray, v3Start) / fHeight; float fStartOffset = fDepth*scale(fStartAngle); float fSampleLength = fFar / fSamples; float fScaledLength = fSampleLength * fScale; vec3 v3SampleRay = v3Ray * fSampleLength; vec3 v3SamplePoint = v3Start + v3SampleRay * 0.5; vec3 v3FrontColor = vec3(0.0, 0.0, 0.0); for(int i=0; i<nSamples; i++) { float fHeight = length(v3SamplePoint); float fDepth = exp(fScaleOverScaleDepth * (fInnerRadius - fHeight)); float fLightAngle = dot(v3LightPos, v3SamplePoint) / fHeight; float fCameraAngle = dot(v3Ray, v3SamplePoint) / fHeight; float fScatter = (fStartOffset + fDepth*(scale(fLightAngle) - scale(fCameraAngle))); vec3 v3Attenuate = exp(-fScatter * (v3InvWavelength * fKr4PI + fKm4PI)); v3FrontColor += v3Attenuate * (fDepth * fScaledLength); v3SamplePoint += v3SampleRay; } gg_FrontSecondaryColor.rgb = v3FrontColor * fKmESun; gg_FrontColor.rgb = v3FrontColor * (v3InvWavelength * fKrESun); gl_Position = MVP * vec4(vertexPosition_modelspace,1); v3Direction = v3CameraPos - v3Pos; } Fragment Shader: #version 330 core uniform vec3 v3LightPos; uniform float g; uniform float g2; in vec3 v3Direction; out vec4 FragColor; in vec4 gg_FrontColor; in vec4 gg_FrontSecondaryColor; void main (void) { float fCos = dot(v3LightPos, v3Direction) / length(v3Direction); float fMiePhase = 1.5 * ((1.0 - g2) / (2.0 + g2)) * (1.0 + fCos*fCos) / pow(1.0 + g2 - 2.0*g*fCos, 1.5); FragColor = gg_FrontColor + fMiePhase * gg_FrontSecondaryColor; FragColor.a = FragColor.b; } I wrote a function to render a sphere, and im trying to render this shader onto a inverted version of it, the sphere works completely fine, with normals and all. My problem is that the sphere gets rendered all black, so the shader is not working. This is how i'm trying to render the atmosphere inside my main rendering loop. glUseProgram(programAtmosphere); glBindTexture(GL_TEXTURE_2D, 0); //###################### glUniform3f(v3CameraPos, getPlayerPos().x, getPlayerPos().y, getPlayerPos().z); glUniform3f(v3LightPos, lightPos.x / sqrt(lightPos.x * lightPos.x + lightPos.y * lightPos.y), lightPos.y / sqrt(lightPos.x * lightPos.x + lightPos.y * lightPos.y), 0); glUniform3f(v3InvWavelength, 1.0 / pow(0.650, 4.0), 1.0 / pow(0.570, 4.0), 1.0 / pow(0.475, 4.0)); glUniform1fARB(fCameraHeight, 1); glUniform1fARB(fCameraHeight2, 1); glUniform1fARB(fInnerRadius, 6350); glUniform1fARB(fInnerRadius2, 6350 * 6350); glUniform1fARB(fOuterRadius, 6450); glUniform1fARB(fOuterRadius2, 6450 * 6450); glUniform1fARB(fKrESun, 0.0025 * 20.0); glUniform1fARB(fKmESun, 0.0015 * 20.0); glUniform1fARB(fKr4PI, 0.0025 * 4.0 * 3.141592653); glUniform1fARB(fKm4PI, 0.0015 * 4.0 * 3.141592653); glUniform1fARB(fScale, 1.0 / (6450 - 6350)); glUniform1fARB(fScaleDepth, 0.25); glUniform1fARB(fScaleOverScaleDepth, 4.0 / (6450 - 6350)); glUniform1fARB(g, -0.85); glUniform1f(g2, -0.85 * -0.85); // vertices glEnableVertexAttribArray(0); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer[1]); glVertexAttribPointer( 0, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? 0, // stride (void*)0 // array buffer offset ); // normals glEnableVertexAttribArray(2); glBindBuffer(GL_ARRAY_BUFFER, normalbuffer[1]); glVertexAttribPointer( 2, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? 0, // stride (void*)0 // array buffer offset ); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, elementbuffer[1]); glUniformMatrix4fv(ModelMatrixAT, 1, GL_FALSE, &ModelMatrix[0][0]); glUniformMatrix4fv(ViewMatrixAT, 1, GL_FALSE, &ViewMatrix[0][0]); glUniformMatrix4fv(ModelViewPAT, 1, GL_FALSE, &MVP[0][0]); // Draw the triangles glDrawElements( GL_TRIANGLES, // mode cubeIndices[1], // count GL_UNSIGNED_SHORT, // type (void*)0 // element array buffer offset ); Any ideas?

    Read the article

  • All is working except if($_POST['submit']=='Update')

    - by user1319909
    I have a working registration and login system. I am trying to create a form where a user can add product registration info (via mysql update). I can't seem to get the db to actually update the fields. What am I missing here?!? <?php define('INCLUDE_CHECK',true); require 'connect.php'; require 'functions.php'; // Those two files can be included only if INCLUDE_CHECK is defined session_name('tzLogin'); // Starting the session session_set_cookie_params(2*7*24*60*60); // Making the cookie live for 2 weeks session_start(); if($_SESSION['id'] && !isset($_COOKIE['tzRemember']) && !$_SESSION['rememberMe']) { // If you are logged in, but you don't have the tzRemember cookie (browser restart) // and you have not checked the rememberMe checkbox: $_SESSION = array(); session_destroy(); // Destroy the session } if(isset($_GET['logoff'])) { $_SESSION = array(); session_destroy(); header("Location: index_login3.php"); exit; } if($_POST['submit']=='Login') { // Checking whether the Login form has been submitted $err = array(); // Will hold our errors if(!$_POST['username'] || !$_POST['password']) $err[] = 'All the fields must be filled in!'; if(!count($err)) { $_POST['username'] = mysql_real_escape_string($_POST['username']); $_POST['password'] = mysql_real_escape_string($_POST['password']); $_POST['rememberMe'] = (int)$_POST['rememberMe']; // Escaping all input data $row = mysql_fetch_assoc(mysql_query("SELECT * FROM electrix_users WHERE usr='{$_POST['username']}' AND pass='".md5($_POST['password'])."'")); if($row['usr']) { // If everything is OK login $_SESSION['usr']=$row['usr']; $_SESSION['id'] = $row['id']; $_SESSION['email'] = $row['email']; $_SESSION['first'] = $row['first']; $_SESSION['last'] = $row['last']; $_SESSION['address1'] = $row['address1']; $_SESSION['address2'] = $row['address2']; $_SESSION['city'] = $row['city']; $_SESSION['state'] = $row['state']; $_SESSION['zip'] = $row['zip']; $_SESSION['country'] = $row['country']; $_SESSION['product1'] = $row['product1']; $_SESSION['serial1'] = $row['serial1']; $_SESSION['product2'] = $row['product2']; $_SESSION['serial2'] = $row['serial2']; $_SESSION['product3'] = $row['product3']; $_SESSION['serial3'] = $row['serial3']; $_SESSION['rememberMe'] = $_POST['rememberMe']; // Store some data in the session setcookie('tzRemember',$_POST['rememberMe']); } else $err[]='Wrong username and/or password!'; } if($err) $_SESSION['msg']['login-err'] = implode('<br />',$err); // Save the error messages in the session header("Location: index_login3.php"); exit; } else if($_POST['submit']=='Register') { // If the Register form has been submitted $err = array(); if(strlen($_POST['username'])<4 || strlen($_POST['username'])>32) { $err[]='Your username must be between 3 and 32 characters!'; } if(preg_match('/[^a-z0-9\-\_\.]+/i',$_POST['username'])) { $err[]='Your username contains invalid characters!'; } if(!checkEmail($_POST['email'])) { $err[]='Your email is not valid!'; } if(!count($err)) { // If there are no errors $pass = substr(md5($_SERVER['REMOTE_ADDR'].microtime().rand(1,100000)),0,6); // Generate a random password $_POST['email'] = mysql_real_escape_string($_POST['email']); $_POST['username'] = mysql_real_escape_string($_POST['username']); $_POST['first'] = mysql_real_escape_string($_POST['first']); $_POST['last'] = mysql_real_escape_string($_POST['last']); $_POST['address1'] = mysql_real_escape_string($_POST['address1']); $_POST['address2'] = mysql_real_escape_string($_POST['address2']); $_POST['city'] = mysql_real_escape_string($_POST['city']); $_POST['state'] = mysql_real_escape_string($_POST['state']); $_POST['zip'] = mysql_real_escape_string($_POST['zip']); $_POST['country'] = mysql_real_escape_string($_POST['country']); // Escape the input data mysql_query(" INSERT INTO electrix_users(usr,pass,email,first,last,address1,address2,city,state,zip,country,regIP,dt) VALUES( '".$_POST['username']."', '".md5($pass)."', '".$_POST['email']."', '".$_POST['first']."', '".$_POST['last']."', '".$_POST['address1']."', '".$_POST['address2']."', '".$_POST['city']."', '".$_POST['state']."', '".$_POST['zip']."', '".$_POST['country']."', '".$_SERVER['REMOTE_ADDR']."', NOW() )"); if(mysql_affected_rows($link)==1) { send_mail( '[email protected]', $_POST['email'], 'Your New Electrix User Password', 'Thank you for registering at www.electrixpro.com. Your password is: '.$pass); $_SESSION['msg']['reg-success']='We sent you an email with your new password!'; } else $err[]='This username is already taken!'; } if(count($err)) { $_SESSION['msg']['reg-err'] = implode('<br />',$err); } header("Location: index_login3.php"); exit; } if($_POST['submit']=='Update') { { mysql_query(" UPDATE electrix_users(product1,serial1,product2,serial2,product3,serial3) WHERE usr='{$_POST['username']}' VALUES( '".$_POST['product1']."', '".$_POST['serial1']."', '".$_POST['product2']."', '".$_POST['serial2']."', '".$_POST['product3']."', '".$_POST['serial3']."', )"); if(mysql_affected_rows($link)==1) { $_SESSION['msg']['upd-success']='Thank you for registering your Electrix product'; } else $err[]='So Sad!'; } if(count($err)) { $_SESSION['msg']['upd-err'] = implode('<br />',$err); } header("Location: index_login3.php"); exit; } if($_SESSION['msg']) { // The script below shows the sliding panel on page load $script = ' <script type="text/javascript"> $(function(){ $("div#panel").show(); $("#toggle a").toggle(); }); </script>'; } ?>

    Read the article

  • depth first search graph by using linked list

    - by programmerwannabe
    im using mac book and i cannot read the text file using this code. moreover, can you guys please add function(graph is connected?, and is this graph tree?) inputA.txt consist 1 2 1 6 1 5 2 3 2 6 3 4 3 6 4 5 4 6 5 6 #include <stdio.h> #include <memory.h> #include <stdlib.h> #define MAX 10 #define TRUE 1 #define FALSE 0 typedef struct Graph{ int vertex; struct Graph* link; } g_node; typedef struct graphType{ int x; int visited[MAX]; g_node* adjList_H[MAX]; } graphType; typedef struct stack{ int data; struct stack* link; } s_node; s_node* top; void push(int item){ s_node* n=(s_node*)malloc(sizeof(s_node)); n->data = item; n->link = top; top = n; } int pop(){ int item; s_node* n=top; if(top == NULL){ puts("\nstack is empty!\n"); return 0; } else { item = n-> data; top = n->link; free(n); return item; } } void createGraph(graphType* g){ int v; g->x = 1; for(v=1 ; v < MAX ; v++){ g -> visited[v] = FALSE; g -> adjList_H[v] = NULL; } } void insertVertex(graphType* g, int v){ if(((g->x)) > MAX){ puts("\n it has been overed the number of vertex\n"); return ; } g -> x++; } void insertEdge(graphType* g, int u, int v){ g_node* node; if(u >= g -> x || v >= g -> x){ puts("\n no vertex in the graph\n"); return ; } node = (g_node*)malloc(sizeof(g_node)); node -> vertex = v; node -> link = g -> adjList_H[u]; g-> adjList_H[u] = node; } void print_adjList(graphType* g){ int i; g_node *p; for(i=1 ; i<g -> x ; i++){ printf("\n\t\t vertex %d adjacency list ", i); p = g -> adjList_H[i]; while(p){ printf("-> %d", p-> vertex); p = p-> link; } } } void DFS_adjList(graphType* g, int v) { g_node* w; top = NULL; push(v); g->visited[v] = TRUE; printf(" %d", v); while(top != NULL){ w=g->adjList_H[v]; while(w){ if (!g->visited[w->vertex]){ push(w->vertex); g->visited[w->vertex] = TRUE; printf(" %d", w->vertex); v = w->vertex; w=g->adjList_H[v]; } else w= w->link; } v = pop(); } } int main (int argc, const char * argv[]) { FILE *fp; char mychar; char arr[][2]={0, }; int j, k; int i; graphType *G9; G9 = (graphType*)malloc(sizeof(graphType)); createGraph(G9); for(i=1; i<7 ; i++) insertVertex(G9, i); fp = fopen("inputD.txt", "r"); for(j = 0 ; j< 10 ; j++){ for(k = 0 ; k < 2 ; k++){ mychar = fgetc(fp); if(mychar = EOF){ j=10; break; } else if(mychar == ' ') continue; else if(mychar <= '9' || mychar >= '1'){ arr[j][k] = mychar; printf("%d%d", arr[i][k]); } } } insertEdge(G9, 1, 2); insertEdge(G9, 1, 6); insertEdge(G9, 1, 5); insertEdge(G9, 2, 3); insertEdge(G9, 2, 6); insertEdge(G9, 3, 4); insertEdge(G9, 3, 6); insertEdge(G9, 4, 5); insertEdge(G9, 4, 6); insertEdge(G9, 5, 6); insertEdge(G9, 6, 5); insertEdge(G9, 6, 4); insertEdge(G9, 5, 4); insertEdge(G9, 6, 3); insertEdge(G9, 4, 3); insertEdge(G9, 6, 2); insertEdge(G9, 3, 2); insertEdge(G9, 5, 1); insertEdge(G9, 6, 1); insertEdge(G9, 2, 1); printf("\n graph adjacency list "); print_adjList(G9); printf("\n \n//////////////////////////////////////////////\n\n depth fist search >> "); DFS_adjList(G9, 1); return 0; }

    Read the article

  • Inaccessible item using C++ inheritance

    - by shinjuo
    I am working on C++ project that uses inheritance. I seem to have an error in visual studio in the below file administrator.h. It says that salariedemploye:salary on line 17 is inaccessible and I am not sure why. Admin.cpp #include namespace SavitchEmployees { Administrator::Administrator( ):SalariedEmployee(), salary(0) { //deliberately empty } Administrator::Administrator(const string& theName, const string& theSsn, double theAnnualSalary) :SalariedEmployee(theName, theSsn),salary(theAnnualSalary) { //deliberately empty } void Administrator::inputAdminData() { cout << " Enter the details of the administrator " << getName() << endl; cout << " Enter the admin title" << endl; getline(cin, adminTitle); cout << " Enter the area of responsibility " << endl; getline(cin, workingArea); cout << " Enter the immediate supervisor's name " << endl; getline(cin, supervisorName); } void Administrator::outputAdminData() { cout << "Name: " << getName() << endl; cout << "Title: " << adminTitle << endl; cout << "Area of responsibility: " << workingArea << endl; cout << "Immediate supervisor: " << supervisorName << endl; } void Administrator::printCheck() { setNetPay(salary); cout << "\n___________________________________\n" << "Pay to the order of " << getName() << endl << "The sum of" << getNetPay() << "Dollars\n" << "______________________________________\n" << "Check Stub Not negotiable \n" << "Employee Number: " << getSsn() << endl << "Salaried Employee(Administrator). Regular Pay: " << salary << endl << "______________________________________\n"; } } admin.h #include <iostream> #include "salariedemployee.h" using std::endl; using std::string; namespace SavitchEmployees { class Administrator : public SalariedEmployee { public: Administrator(); Administrator(const string& theName, const string& theSsn, double salary); double getSalary() const; void inputAdminData(); void outputAdminData(); void printCheck(); private: string adminTitle;//administrator's title string workingArea;//area of responsibility string supervisorName;//immediate supervisor }; } #endif SalariedEmployee.cpp namespace SavitchEmployees { SalariedEmployee::SalariedEmployee():Employee(),salary(0) { //deliberately empty } SalariedEmployee::SalariedEmployee(const string& theName, const string& theNumber, double theWeeklyPay) :Employee(theName, theNumber), salary(theWeeklyPay) { //deliberately empty } double SalariedEmployee::getSalary() const { return salary; } void SalariedEmployee::setSalary(double newSalary) { salary = newSalary; } void SalariedEmployee::printCheck() { setNetPay(salary); cout << "\n___________________________________\n" << "Pay to the order of " << getName() << endl << "The sum of" << getNetPay() << "Dollars\n" << "______________________________________\n" << "Check Stub NOT NEGOTIABLE \n" << "Employee Number: " << getSsn() << endl << "Salaried Employee. Regular Pay: " << salary << endl << "______________________________________\n"; } } Salariedemplyee.h #ifndef SALARIEDEMPLOYEE_H #define SALARIEDEMPLOYEE_H #include <string> #include "employee.h" namespace SavitchEmployees{ class SalariedEmployee : public Employee{ public: SalariedEmployee(); SalariedEmployee(const string& theName, const string& theSsn, double theWeeklySalary); double getSalary() const; void setSalary(double newSalary); void printCheck(); private: double salary; }; } #endif employee.cpp namespace SavitchEmployees { Employee::Employee():name("No name yet"),ssn("No number yet"),netPay(0){} Employee::Employee(const string& theName, const string& theSsn):name(theName),ssn(theSsn),netPay(0){} string Employee::getName() const { return name; } string Employee::getSsn() const { return ssn; } double Employee::getNetPay() const { return netPay; } void Employee::setName(const string& newName) { name = newName; } void Employee::setSsn(const string& newSsn) { ssn = newSsn; } void Employee::setNetPay(double newNetPay) { netPay = newNetPay; } void Employee::printCheck() const { cout << "\nERROR: pringCheck function called for an \n" << "Undifferentiated employee. Aborting the program!\n" << "Check with the author of this program about thos bug. \n"; exit(1); } }

    Read the article

  • SINGLE SIGN ON SECURITY THREAT! FACEBOOK access_token broadcast in the open/clear

    - by MOKANA
    Subsequent to my posting there was a remark made that this was not really a question but I thought I did indeed postulate one. So that there is no ambiquity here is the question with a lead in: Since there is no data sent from Facebook during the Canvas Load process that is not at some point divulged, including the access_token, session and other data that could uniquely identify a user, does any one see any other way other than adding one more layer, i.e., a password, sent over the wire via HTTPS along with the access_toekn, that will insure unique untampered with security by the user? Using Wireshark I captured the local broadcast while loading my Canvas Application page. I was hugely surprised to see the access_token broadcast in the open, viewable for any one to see. This access_token is appended to any https call to the Facebook OpenGraph API. Using facebook as a single click log on has now raised huge concerns for me. It is stored in a session object in memory and the cookie is cleared upon app termination and after reviewing the FB.Init calls I saw a lot of HTTPS calls so I assumed the access_token was always encrypted. But last night I saw in the status bar a call from what was simply an http call that included the App ID so I felt I should sniff the Application Canvas load sequence. Today I did sniff the broadcast and in the attached image you can see that there are http calls with the access_token being broadcast in the open and clear for anyone to gain access to. Am I missing something, is what I am seeing and my interpretation really correct. If any one can sniff and get the access_token they can theorically make calls to the Graph API via https, even though the call back would still need to be the site established in Facebook's application set up. But what is truly a security threat is anyone using the access_token for access to their own site. I do not see the value of a single sign on via Facebook if the only thing that was established as secure was the access_token - becuase for what I can see it clearly is not secure. Access tokens that never have an expire date do not change. Access_tokens are different for every user, to access to another site could be held tight to just a single user, but compromising even a single user's data is unacceptable. http://www.creatingstory.com/images/InTheOpen.png Went back and did more research on this: FINDINGS: Went back an re ran the canvas application to verify that it was not any of my code that was not broadcasting. In this call: HTTP GET /connect.php/en_US/js/CacheData HTTP/1.1 The USER ID is clearly visible in the cookie. So USER_ID's are fully visible, but they are already. Anyone can go to pretty much any ones page and hover over the image and see the USER ID. So no big threat. APP_ID are also easily obtainable - but . . . http://www.creatingstory.com/images/InTheOpen2.png The above file clearly shows the FULL ACCESS TOKEN clearly in the OPEN via a Facebook initiated call. Am I wrong. TELL ME I AM WRONG because I want to be wrong about this. I have since reset my app secret so I am showing the real sniff of the Canvas Page being loaded. Additional data 02/20/2011: @ifaour - I appreciate the time you took to compile your response. I am pretty familiar with the OAuth process and have a pretty solid understanding of the signed_request unpacking and utilization of the access_token. I perform a substantial amount of my processing on the server and my Facebook server side flows are all complete and function without any flaw that I know of. The application secret is secure and never passed to the front end application and is also changed regularly. I am being as fanatical about security as I can be, knowing there is so much I don’t know that could come back and bite me. Two huge access_token issues: The issues concern the possible utilization of the access_token from the USER AGENT (browser). During the FB.INIT() process of the Facebook JavaScript SDK, a cookie is created as well as an object in memory called a session object. This object, along with the cookie contain the access_token, session, a secret, and uid and status of the connection. The session object is structured such that is supports both the new OAuth and the legacy flows. With OAuth, the access_token and status are pretty much al that is used in the session object. The first issue is that the access_token is used to make HTTPS calls to the GRAPH API. If you had the access_token, you could do this from any browser: https://graph.facebook.com/220439?access_token=... and it will return a ton of information about the user. So any one with the access token can gain access to a Facebook account. You can also make additional calls to any info the user has granted access to the application tied to the access_token. At first I thought that a call into the GRAPH had to have a Callback to the URL established in the App Setup, but I tested it as mentioned below and it will return info back right into the browser. Adding that callback feature would be a good idea I think, tightens things up a bit. The second issue is utilization of some unique private secured data that identifies the user to the third party data base, i.e., like in my case, I would use a single sign on to populate user information into my database using this unique secured data item (i.e., access_token which contains the APP ID, the USER ID, and a hashed with secret sequence). None of this is a problem on the server side. You get a signed_request, you unpack it with secret, make HTTPS calls, get HTTPS responses back. When a user has information entered via the USER AGENT(browser) that must be stored via a POST, this unique secured data element would be sent via HTTPS such that they are validated prior to data base insertion. However, If there is NO secured piece of unique data that is supplied via the single sign on process, then there is no way to guarantee unauthorized access. The access_token is the one piece of data that is utilized by Facebook to make the HTTPS calls into the GRAPH API. it is considered unique in regards to BOTH the USER and the APPLICATION and is initially secure via the signed_request packaging. If however, it is subsequently transmitted in the clear and if I can sniff the wire and obtain the access_token, then I can pretend to be the application and gain the information they have authorized the application to see. I tried the above example from a Safari and IE browser and it returned all of my information to me in the browser. In conclusion, the access_token is part of the signed_request and that is how the application initially obtains it. After OAuth authentication and authorization, i.e., the USER has logged into Facebook and then runs your app, the access_token is stored as mentioned above and I have sniffed it such that I see it stored in a Cookie that is transmitted over the wire, resulting in there being NO UNIQUE SECURED IDENTIFIABLE piece of information that can be used to support interaction with the database, or in other words, unless there were one more piece of secure data sent along with the access_token to my database, i.e., a password, I would not be able to discern if it is a legitimate call. Luckily I utilized secure AJAX via POST and the call has to come from the same domain, but I am sure there is a way to hijack that. I am totally open to any ideas on this topic on how to uniquely identify my USERS other than adding another layer (password) via this single sign on process or if someone would just share with me that I read and analyzed my data incorrectly and that the access_token is always secure over the wire. Mahalo nui loa in advance.

    Read the article

  • CakePHP 3-level-deep model associatons

    - by user357452
    Hi, I am relatively new to CakePHP, I am doing fine with the documentation, but I've been trying to find a way out to this problem for weeks and I don't seem to find the solution, I am sure it is easy and maybe even automagicaly doable, but I just don't know how to find it (maybe I don't know the jargon for these kind of things) My model structure is like this: <?php class Trip extends AppModel { var $belongsTo = array( 'User' => array( 'className' => 'User', 'foreignKey' => 'user_id' ), 'Start' => array( 'className' => 'Place', 'foreignKey' => 'start_id' ), 'End' => array( 'className' => 'Place', 'foreignKey' => 'end_id' ), 'Transport' => array( 'className' => 'Transport', 'foreignKey' => 'transport_id' ) ); } ?> <?php class Place extends AppModel { var $belongsTo = array( 'User' => array( 'className' => 'User', 'foreignKey' => 'user_id' ), 'Country' => array( 'className' => 'Country', 'foreignKey' => 'country_id' ), 'State' => array( 'className' => 'State', 'foreignKey' => 'state_id' ), 'City' => array( 'className' => 'City', 'foreignKey' => 'city_id' ) ); var $hasMany = array( 'PlaceStart' => array( 'className' => 'trip', 'foreignKey' => 'start_id', 'dependent' => false ), 'PlaceEnd' => array( 'className' => 'trip', 'foreignKey' => 'end_id', 'dependent' => false ) ); } ?> <?php class State extends AppModel { var $belongsTo = array( 'Country' => array( 'className' => 'Country', 'foreignKey' => 'country_id', 'conditions' => '', 'fields' => '', 'order' => '' ) ); var $hasMany = array( 'City' => array( 'className' => 'City', 'foreignKey' => 'city_id', 'dependent' => false ) ); } ?> ... and so forth with User, City, Country, and Transport Models. What I am trying to achieve is to get all the information of the whole tree when I search for a Trip. <?php class TripController extends AppController { function index() { debug($this->Trip->find('first')); } } Outputs Array ( [Trip] => Array ( [id] => 6 [created] => 2010-05-04 00:23:59 [user_id] => 4 [start_id] => 2 [end_id] => 1 [title] => My trip [transport_id] => 1 ) [User] => Array ( [id] => 4 [name] => John Doe [email] => [email protected] ) [Start] => Array ( [id] => 2 [user_id] => 4 [country_id] => 1 [state_id] => 1 [city_id] => 1 [direccion] => Lincoln Street ) [End] => Array ( [id] => 1 [user_id] => 4 [country_id] => 1 [state_id] => 1 [city_id] => 4 [address] => Fifth Avenue ) [Transport] => Array ( [id] => 1 [name] => car ) ) Here is the question: How do I get in one query all the information down the tree? I would like to have something like Array ( [Trip] => Array ( [id] => 6 [created] => 2010-05-04 00:23:59 [User] => Array ( [id] => 4 [name] => John Doe [email] => [email protected] ) [Start] => Array ( [id] => 2 [user_id] => 4 [Country] => Array ( [id] => 1 [name] = Spain ) [State] => Array ( [id] => 1 [name] = Barcelona ) [City] => Array ( [id] => 1 [name] = La Floresta ) [address] => Lincoln Street ) [End] => (same as Start) [title] => My trip [Transport] => Array ( [id] => 1 [name] => car ) ) ) Can CakePHP create this kind of data? Not only for $this->Model->find() but also for $this->paginate() as for example: // filter by start if(isset($this->passedArgs['start'])) { //debug('isset '.$this->passedArgs['start']); $start = $this->passedArgs['start']; $this->paginate['conditions'][] = array( 'OR' => array( 'Start.address LIKE' => "%$start%", 'Start.State.name LIKE' => "%$start%", 'Start.City.name LIKE' => "%$start%", 'Start.Country.name LIKE' => "%$start%" ) ); $this->data['Search']['start'] = $start; } It seems like a rough question but I am sure this is extensively done and documented, I'd really appreciate any help. Thanks Cheers Naoise

    Read the article

  • Something very strange with network

    - by Rodnower
    Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

    Read the article

  • OpenVPN Client timing out

    - by Austin
    I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • How to Upload a file from client to server using OFBIZ?

    - by SIVAKUMAR.J
    Hi all, Im new to ofbiz.So is my question is have any mistake forgive me for my mistakes.Im new to ofbiz so i did not know some terminologies in ofbiz.Sometimes my question is not clear because of lack of knowledge in ofbiz.So try to understand my question and give me a good solution with respect to my level.Because some solutions are in very high level cannot able to understand for me.So please give the solution with good examples. My problem is i created a project inside the ofbiz/hot-deploy folder namely "productionmgntSystem".Inside the folder "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem" i created a .ftl file namely "app_details_1.ftl" .The following are the coding of this file <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>Insert title here</title> <script TYPE="TEXT/JAVASCRIPT" language=""JAVASCRIPT"> function uploadFile() { //alert("Before calling upload.jsp"); window.location='<@ofbizUrl>testing_service1</@ofbizUrl>' } </script> </head> <!-- <form action="<@ofbizUrl>testing_service1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> --> <form action="<@ofbizUrl>logout1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> <center style="height: 299px; "> <table border="0" style="height: 177px; width: 788px"> <tr style="height: 115px; "> <td style="width: 103px; "> <td style="width: 413px; "><h1>APPLICATION DETAILS</h1> <td style="width: 55px; "> </tr> <tr> <td style="width: 125px; ">Application name : </td> <td> <input name="app_name_txt" id="txt_1" value=" " /> </td> </tr> <tr> <td style="width: 125px; ">Excell sheet &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;: </td> <td> <input type="file" name="filename"/> </td> </tr> <tr> <td> <!-- <input type="button" name="logout1_cmd" value="Logout" onclick="logout1()"/> --> <input type="submit" name="logout_cmd" value="logout"/> </td> <td> <!-- <input type="submit" name="upload_cmd" value="Submit" /> --> <input type="button" name="upload1_cmd" value="Upload" onclick="uploadFile()"/> </td> </tr> </table> </center> </form> </html> the following coding is present in the file "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem\WEB-INF\controller.xml" ...... ....... ........ <request-map uri="testing_service1"> <security https="true" auth="true"/> <event type="java" path="org.ofbiz.productionmgntSystem.web_app_req.WebServices1" invoke="testingService"/> <response name="ok" type="view" value="ok_view"/> <response name="exception" type="view" value="exception_view"/> </request-map> .......... ............ .......... <view-map name="ok_view" type="ftl" page="ok_view.ftl"/> <view-map name="exception_view" type="ftl" page="exception_view.ftl"/> ................ ............. ............. The following are the coding present in the file "ofbiz\hot-deploy\productionmgntSystem\src\org\ofbiz\productionmgntSystem\web_app_req\WebServices1.java" package org.ofbiz.productionmgntSystem.web_app_req; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.DataInputStream; import java.io.FileOutputStream; import java.io.IOException; public class WebServices1 { public static String testingService(HttpServletRequest request, HttpServletResponse response) { //int i=0; String result="ok"; System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- Start"); String contentType=request.getContentType(); System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- contentType : "+contentType); String str=new String(); // response.setContentType("text/html"); //PrintWriter writer; if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0)) { System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) after if (contentType != null)"); try { // writer=response.getWriter(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try Start"); DataInputStream in = new DataInputStream(request.getInputStream()); int formDataLength = request.getContentLength(); byte dataBytes[] = new byte[formDataLength]; int byteRead = 0; int totalBytesRead = 0; //this loop converting the uploaded file into byte code while (totalBytesRead < formDataLength) { byteRead = in.read(dataBytes, totalBytesRead,formDataLength); totalBytesRead += byteRead; } String file = new String(dataBytes); //for saving the file name String saveFile = file.substring(file.indexOf("filename=\"") + 10); saveFile = saveFile.substring(0, saveFile.indexOf("\n")); saveFile = saveFile.substring(saveFile.lastIndexOf("\\")+ 1,saveFile.indexOf("\"")); int lastIndex = contentType.lastIndexOf("="); String boundary = contentType.substring(lastIndex + 1,contentType.length()); int pos; //extracting the index of file pos = file.indexOf("filename=\""); pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; int boundaryLocation = file.indexOf(boundary, pos) - 4; int startPos = ((file.substring(0, pos)).getBytes()).length; int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length; //creating a new file with the same name and writing the content in new file FileOutputStream fileOut = new FileOutputStream("/"+saveFile); fileOut.write(dataBytes, startPos, (endPos - startPos)); fileOut.flush(); fileOut.close(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try End"); } catch(IOException ioe) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch IOException"); //ioe.printStackTrace(); return("exception"); } catch(Exception ex) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch Exception"); return("exception"); } } else { System.out.println("\n\n\t********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) else part"); result="exception"; } System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- End"); return(result); } } I want to upload a file to the server.The file is get from user "<input type="file"..> tag in the "app_details_1.ftl" file & it is updated into the server by using the method "testingService(HttpServletRequest request, HttpServletResponse response)" in the class "WebServices1".But the file is not uploaded. Give me a good solution for uploading a file to the server. Thanks & Regards, Sivakumar.J

    Read the article

  • How to implement EntityDataSource Where IN entity sql clause

    - by TonyS
    I want to pass a number of values into a parameter of the EntityDataSource, e.g.: Where="it.ORDER_ID IN {@OrderIdList}" (this is a property on the EntityDataSource) <WhereParameters> <asp:ControlParameter Name="OrderIdList" Type="Int16" ControlID="OrderFilterControl" PropertyName="OrderIdList" /> </WhereParameters> This doesn't work as ORDER_ID is of type int32 and I need to pass in multiple values, e.g. {1,2,3} etc The next thing I tried was setting the Where clause in code-behind and this all works except I can't get data binding on DropDownLists to work. By this I mean no value is returned from the bound dropdownlists in the EntityDataSource Updating Event. My ideal solution would be to use a WhereParameter on the EntityDataSource but any help is appreciated. Thanks, Tony. A complete code example follows using the AdventureWorks db: Public Class EntityDataSourceWhereInClause Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load CustomersEntityDataSource.Where = WhereClause ''# reset after each postback as its lost otherwise End Sub Private Sub cmdFilterCustomers_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles cmdFilterCustomers.Click Dim CustomerIdList As New Generic.List(Of Int32) For Each item As ListItem In CustomerIdCheckBoxList.Items If item.Selected Then CustomerIdList.Add(item.Value) End If Next Dim CustomerCsvList As String = String.Join(", ", CustomerIdList.Select(Function(o) o.ToString()).ToArray()) WhereClause = "it.CustomerID IN {" & CustomerCsvList & "}" CustomersEntityDataSource.Where = WhereClause FormView1.PageIndex = 0 End Sub ''# save between postbacks the custom Where IN clause Public Property WhereClause() As String Get Return ViewState("WhereClause") End Get Set(ByVal value As String) ViewState.Add("WhereClause", value) End Set End Property Private Sub CustomersEntityDataSource_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.EntityDataSourceChangingEventArgs) Handles CustomersEntityDataSource.Updating Dim c = CType(e.Entity, EntityFrameworkTest.Customer) If c.Title.Length = 0 Then Response.Write("Title is empty string, so will save like this!") End If End Sub End Class <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="EntityDataSourceWhereInClause.aspx.vb" Inherits="EntityFrameworkTest.EntityDataSourceWhereInClause" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <%''# filter control %> <div> <asp:EntityDataSource ID="CustomerIdListEntityDataSource" runat="server" ConnectionString="name=AdventureWorksLT2008Entities" DefaultContainerName="AdventureWorksLT2008Entities" EnableFlattening="False" EntitySetName="Customers" Select="it.[CustomerID]" OrderBy="it.[CustomerID]"> </asp:EntityDataSource> <asp:CheckBoxList ID="CustomerIdCheckBoxList" runat="server" DataSourceID="CustomerIdListEntityDataSource" DataTextField="CustomerID" DataValueField="CustomerID" RepeatDirection="Horizontal"> </asp:CheckBoxList> <asp:Button ID="cmdFilterCustomers" runat="server" Text="Apply Filter" /> </div> <% ''# you get this error passing in CSV in the where clause ''# The element type 'Edm.Int32' and the CollectionType 'Transient.collection[Edm.String(Nullable=True,DefaultValue=,MaxLength=,Unicode=,FixedLength=)]' are not compatible. The IN expression only supports entity, primitive, and reference types. Near WHERE predicate, line 6, column 15. ''# so have coded it manually in code-behind Where="it.CustomerID IN {@OrderIdList}" %> <asp:EntityDataSource ID="CustomersEntityDataSource" runat="server" ConnectionString="name=AdventureWorksLT2008Entities" DefaultContainerName="AdventureWorksLT2008Entities" EnableFlattening="False" EnableUpdate="True" EntitySetName="Customers" AutoGenerateOrderByClause="false"> </asp:EntityDataSource> <%''# updating works with DropDownLists until the Where clause is set in code %> <asp:FormView ID="FormView1" runat="server" AllowPaging="True" CellPadding="4" DataKeyNames="CustomerID" DataSourceID="CustomersEntityDataSource" ForeColor="#333333"> <EditItemTemplate> CustomerID: <asp:Label ID="CustomerIDLabel1" runat="server" Text='<%# Eval("CustomerID") %>' /> <br /> NameStyle: <asp:CheckBox ID="NameStyleCheckBox" runat="server" Checked='<%# Bind("NameStyle") %>' /> <br /> Title: <%''# the SelectedValue is not Bound to the EF object if the Where clause is updated in code-behind %> <asp:DropDownList ID="ddlTitleBound" runat="server" DataSourceID="TitleEntityDataSource" DataTextField="Title" DataValueField="Title" AutoPostBack="false" AppendDataBoundItems="true" SelectedValue='<%# Bind("Title") %>'> </asp:DropDownList> <asp:EntityDataSource ID="TitleEntityDataSource" runat="server" ConnectionString="name=AdventureWorksLT2008Entities" DefaultContainerName="AdventureWorksLT2008Entities" EnableFlattening="False" EntitySetName="Customers" Select="it.[Title]" GroupBy="it.[Title]" ViewStateMode="Enabled"> </asp:EntityDataSource> <br /> FirstName: <asp:TextBox ID="FirstNameTextBox" runat="server" Text='<%# Bind("FirstName") %>' /> <br /> MiddleName: <asp:TextBox ID="MiddleNameTextBox" runat="server" Text='<%# Bind("MiddleName") %>' /> <br /> LastName: <asp:TextBox ID="LastNameTextBox" runat="server" Text='<%# Bind("LastName") %>' /> <br /> Suffix: <asp:TextBox ID="SuffixTextBox" runat="server" Text='<%# Bind("Suffix") %>' /> <br /> CompanyName: <asp:TextBox ID="CompanyNameTextBox" runat="server" Text='<%# Bind("CompanyName") %>' /> <br /> SalesPerson: <asp:TextBox ID="SalesPersonTextBox" runat="server" Text='<%# Bind("SalesPerson") %>' /> <br /> EmailAddress: <asp:TextBox ID="EmailAddressTextBox" runat="server" Text='<%# Bind("EmailAddress") %>' /> <br /> Phone: <asp:TextBox ID="PhoneTextBox" runat="server" Text='<%# Bind("Phone") %>' /> <br /> PasswordHash: <asp:TextBox ID="PasswordHashTextBox" runat="server" Text='<%# Bind("PasswordHash") %>' /> <br /> PasswordSalt: <asp:TextBox ID="PasswordSaltTextBox" runat="server" Text='<%# Bind("PasswordSalt") %>' /> <br /> rowguid: <asp:TextBox ID="rowguidTextBox" runat="server" Text='<%# Bind("rowguid") %>' /> <br /> ModifiedDate: <asp:TextBox ID="ModifiedDateTextBox" runat="server" Text='<%# Bind("ModifiedDate") %>' /> <br /> <asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True" CommandName="Update" Text="Update" /> &nbsp;<asp:LinkButton ID="UpdateCancelButton" runat="server" CausesValidation="False" CommandName="Cancel" Text="Cancel" /> </EditItemTemplate> <EditRowStyle BackColor="#999999" /> <FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <ItemTemplate> CustomerID: <asp:Label ID="CustomerIDLabel" runat="server" Text='<%# Eval("CustomerID") %>' /> <br /> NameStyle: <asp:CheckBox ID="NameStyleCheckBox" runat="server" Checked='<%# Bind("NameStyle") %>' Enabled="false" /> <br /> Title: <asp:Label ID="TitleLabel" runat="server" Text='<%# Bind("Title") %>' /> <br /> FirstName: <asp:Label ID="FirstNameLabel" runat="server" Text='<%# Bind("FirstName") %>' /> <br /> MiddleName: <asp:Label ID="MiddleNameLabel" runat="server" Text='<%# Bind("MiddleName") %>' /> <br /> LastName: <asp:Label ID="LastNameLabel" runat="server" Text='<%# Bind("LastName") %>' /> <br /> Suffix: <asp:Label ID="SuffixLabel" runat="server" Text='<%# Bind("Suffix") %>' /> <br /> CompanyName: <asp:Label ID="CompanyNameLabel" runat="server" Text='<%# Bind("CompanyName") %>' /> <br /> SalesPerson: <asp:Label ID="SalesPersonLabel" runat="server" Text='<%# Bind("SalesPerson") %>' /> <br /> EmailAddress: <asp:Label ID="EmailAddressLabel" runat="server" Text='<%# Bind("EmailAddress") %>' /> <br /> Phone: <asp:Label ID="PhoneLabel" runat="server" Text='<%# Bind("Phone") %>' /> <br /> PasswordHash: <asp:Label ID="PasswordHashLabel" runat="server" Text='<%# Bind("PasswordHash") %>' /> <br /> PasswordSalt: <asp:Label ID="PasswordSaltLabel" runat="server" Text='<%# Bind("PasswordSalt") %>' /> <br /> rowguid: <asp:Label ID="rowguidLabel" runat="server" Text='<%# Bind("rowguid") %>' /> <br /> ModifiedDate: <asp:Label ID="ModifiedDateLabel" runat="server" Text='<%# Bind("ModifiedDate") %>' /> <br /> <asp:LinkButton ID="EditButton" runat="server" CausesValidation="False" CommandName="Edit" Text="Edit" /> </ItemTemplate> <PagerSettings Position="Top" /> <PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" /> <RowStyle BackColor="#F7F6F3" ForeColor="#333333" /> </asp:FormView> </form>

    Read the article

  • javascript replace text with images problem

    - by Amit Malhotra
    I'm extremely new to JS and have this code that I'm trying to tweak. WHen I was adding the array, I had tested it with only a couple of items and it was working fine, now it just doesn't work, and I can't figure out what is wrong with it!! Basically, I'm trying to change every instance of a card type with an image on a webpage Here's the code: window.onload = function(){ var cardname = new Array(); cardname[0] = "Ace of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_a.svg/88px-Ornamental_h_a.svg.png' />"; cardname[1] = "2 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_2.svg/88px-Ornamental_h_2.svg.png' />"; cardname[2] = "3 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_3.svg/88px-Ornamental_h_3.svg.png' />"; cardname[3] = "4 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_4.svg/88px-Ornamental_h_4.svg.png' />"; cardname[4] = "5 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_5.svg/88px-Ornamental_h_5.svg.png' />"; cardname[5] = "6 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_6.svg/88px-Ornamental_h_6.svg.png' />"; cardname[6] = "7 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_7.svg/88px-Ornamental_h_7.svg.png' />"; cardname[7] = "8 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_8.svg/88px-Ornamental_h_8.svg.png' />"; cardname[8] = "9 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_9.svg/88px-Ornamental_h_9.svg.png' />"; cardname[9] = "10 of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/9/91/Ornamental_h_10.svg/88px-Ornamental_h_10.svg.png' />"; cardname[10] = "Jack of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_j.svg/88px-Ornamental_h_j.svg.png' />"; cardname[11] = "Queen of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_q.svg/88px-Ornamental_h_q.svg.png' />"; cardname[12] = "King of Hearts^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_h_k.svg/88px-Ornamental_h_k.svg.png' />"; cardname[13] = "Ace of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_a.svg/88px-Ornamental_s_a.svg.png' />"; cardname[14] = "2 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_2.svg/88px-Ornamental_s_2.svg.png' />"; cardname[15] = "3 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_3.svg/88px-Ornamental_s_3.svg.png' />"; cardname[16] = "4 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_4.svg/88px-Ornamental_s_4.svg.png' />"; cardname[17] = "5 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_5.svg/88px-Ornamental_s_5.svg.png' />"; cardname[18] = "6 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_6.svg/88px-Ornamental_s_6.svg.png' />"; cardname[19] = "7 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_7.svg/88px-Ornamental_s_7.svg.png' />"; cardname[20] = "8 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_8.svg/88px-Ornamental_s_8.svg.png' />"; cardname[21] = "9 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_9.svg/88px-Ornamental_s_9.svg.png' />"; cardname[22] = "10 of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_10.svg/88px-Ornamental_s_10.svg.png' />"; cardname[23] = "Jack of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/78/Ornamental_s_j.svg/88px-Ornamental_s_j.svg.png' />"; cardname[24] = "Queen of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_q.svg/88px-Ornamental_s_q.svg.png' />"; cardname[25] = "King of Spades^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_s_k.svg/88px-Ornamental_s_k.svg.png' />"; cardname[26] = "Ace of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_a.svg/88px-Ornamental_c_a.svg.png' />"; cardname[27] = "2 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_2.svg/88px-Ornamental_c_2.svg.png' />"; cardname[28] = "3 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_3.svg/88px-Ornamental_c_3.svg.png' />"; cardname[29] = "4 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_4.svg/88px-Ornamental_c_4.svg.png' />"; cardname[30] = "5 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_5.svg/88px-Ornamental_c_5.svg.png' />"; cardname[31] = "6 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_6.svg/88px-Ornamental_c_6.svg.png' />"; cardname[32] = "7 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_7.svg/88px-Ornamental_c_7.svg.png' />"; cardname[33] = "8 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_8.svg/88px-Ornamental_c_8.svg.png' />"; cardname[34] = "9 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_9.svg/88px-Ornamental_c_9.svg.png' />"; cardname[35] = "10 of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_10.svg/88px-Ornamental_c_10.svg.png' />"; cardname[36] = "Jack of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_j.svg/88px-Ornamental_c_j.svg.png' />"; cardname[37] = "Queen of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_q.svg/88px-Ornamental_c_q.svg.png' />"; cardname[38] = "King of Clubs^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_c_k.svg/88px-Ornamental_c_k.svg.png' />"; cardname[39] = "Ace of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_a.svg/88px-Ornamental_d_a.svg.png' />"; cardname[40] = "2 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_2.svg/88px-Ornamental_d_2.svg.png' />"; cardname[41] = "3 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_3.svg/88px-Ornamental_d_3.svg.png' />"; cardname[42] = "4 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_4.svg/88px-Ornamental_d_4.svg.png' />"; cardname[43] = "5 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_5.svg/88px-Ornamental_d_5.svg.png' />"; cardname[44] = "6 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_6.svg/88px-Ornamental_d_6.svg.png' />"; cardname[45] = "7 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_7.svg/88px-Ornamental_d_7.svg.png' />"; cardname[46] = "8 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_8.svg/88px-Ornamental_d_8.svg.png' />"; cardname[47] = "9 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_9.svg/88px-Ornamental_d_9.svg.png' />"; cardname[48] = "10 of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_10.svg/88px-Ornamental_d_10.svg.png' />"; cardname[49] = "Jack of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_j.svg/88px-Ornamental_d_j.svg.png' />"; cardname[50] = "Queen of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_q.svg/88px-Ornamental_d_q.svg.png' />"; cardname[51] = "King of Diamonds^<img src='http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Ornamental_d_k.svg/88px-Ornamental_d_k.svg.png' />"; var j, k, findit, part, page, repl; var page = document.body.innerHTML; for(var i=0; i<cardname.length; i++){ part = cardname[i].split("^"); findit = part[0]; repl = part[1]; while (page.indexOf(findit) >=0){ var j = page.indexOf(findit); var k = findit.length; page = page.substr(0,j) + repl + page.substr(j+k); } } document.body.innerHTML = page; } any help would be appreciated to figure out why this code is not working!

    Read the article

  • App using MonoTouch Core Graphics mysteriously crashes

    - by Stephen Ashley
    My app launches with a view controller and a simple view consisting of a button and a subview. When the user touches the button, the subview is populated with scrollviews that display the column headers, row headers, and cells of a spreadsheet. To draw the cells, I use CGBitmapContext to draw the cells, generate an image, and then put the image into the imageview contained in the scrollview that displays the cells. When I run the app on the iPad, it displays the cells just fine, and the scrollview lets the user scroll around in the spreadsheet without any problems. If the user touches the button a second time, the spreadsheet redraws and continues to work perfectly, If, however, the user touches the button a third time, the app crashes. There is no exception information display in the Application Output window. My first thought was that the successive button pushes were using up all the available memory, so I overrode the DidReceiveMemoryWarning method in the view controller and used a breakpoint to confirm that this method was not getting called. My next thought was that the CGBitmapContext was not getting released and looked for a Monotouch equivalent of Objective C's CGContextRelease() function. The closest I could find was the CGBitmapContext instance method Dispose(), which I called, without solving the problem. In order to free up as much memory as possible (in case I was somehow running out of memory without tripping a warning), I tried forcing garbage collection each time I finished using a CGBitmapContext. This made the problem worse. Now the program would crash moments after displaying the spreadsheet the first time. This caused me to wonder whether the Garbage Collector was somehow collecting something necessary to the continued display of graphics on the screen. I would be grateful for any suggestions on further avenues to investigate for the cause of these crashes. I have included the source code for the SpreadsheetView class. The relevant method is DrawSpreadsheet(), which is called when the button is touched. Thank you for your assistance on this matter. Stephen Ashley public class SpreadsheetView : UIView { public ISpreadsheetMessenger spreadsheetMessenger = null; public UIScrollView cellsScrollView = null; public UIImageView cellsImageView = null; public SpreadsheetView(RectangleF frame) : base() { Frame = frame; BackgroundColor = Constants.backgroundBlack; AutosizesSubviews = true; } public void DrawSpreadsheet() { UInt16 RowHeaderWidth = spreadsheetMessenger.RowHeaderWidth; UInt16 RowHeaderHeight = spreadsheetMessenger.RowHeaderHeight; UInt16 RowCount = spreadsheetMessenger.RowCount; UInt16 ColumnHeaderWidth = spreadsheetMessenger.ColumnHeaderWidth; UInt16 ColumnHeaderHeight = spreadsheetMessenger.ColumnHeaderHeight; UInt16 ColumnCount = spreadsheetMessenger.ColumnCount; // Add the corner UIImageView cornerView = new UIImageView(new RectangleF(0f, 0f, RowHeaderWidth, ColumnHeaderHeight)); cornerView.BackgroundColor = Constants.headingColor; CGColorSpace cornerColorSpace = null; CGBitmapContext cornerContext = null; IntPtr buffer = Marshal.AllocHGlobal(RowHeaderWidth * ColumnHeaderHeight * 4); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory."); try { cornerColorSpace = CGColorSpace.CreateDeviceRGB(); cornerContext = new CGBitmapContext (buffer, RowHeaderWidth, ColumnHeaderHeight, 8, 4 * RowHeaderWidth, cornerColorSpace, CGImageAlphaInfo.PremultipliedFirst); cornerContext.SetFillColorWithColor(Constants.headingColor.CGColor); cornerContext.FillRect(new RectangleF(0f, 0f, RowHeaderWidth, ColumnHeaderHeight)); cornerView.Image = UIImage.FromImage(cornerContext.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (cornerContext != null) { cornerContext.Dispose(); cornerContext = null; } if (cornerColorSpace != null) { cornerColorSpace.Dispose(); cornerColorSpace = null; } } cornerView.Image = DrawBottomRightCorner(cornerView.Image); AddSubview(cornerView); // Add the cellsScrollView cellsScrollView = new UIScrollView (new RectangleF(RowHeaderWidth, ColumnHeaderHeight, Frame.Width - RowHeaderWidth, Frame.Height - ColumnHeaderHeight)); cellsScrollView.ContentSize = new SizeF (ColumnCount * ColumnHeaderWidth, RowCount * RowHeaderHeight); Size iContentSize = new Size((int)cellsScrollView.ContentSize.Width, (int)cellsScrollView.ContentSize.Height); cellsScrollView.BackgroundColor = UIColor.Black; AddSubview(cellsScrollView); CGColorSpace colorSpace = null; CGBitmapContext context = null; CGGradient gradient = null; UIImage image = null; int bytesPerRow = 4 * iContentSize.Width; int byteCount = bytesPerRow * iContentSize.Height; buffer = Marshal.AllocHGlobal(byteCount); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory."); try { colorSpace = CGColorSpace.CreateDeviceRGB(); context = new CGBitmapContext (buffer, iContentSize.Width, iContentSize.Height, 8, 4 * iContentSize.Width, colorSpace, CGImageAlphaInfo.PremultipliedFirst); float[] components = new float[] {.75f, .75f, .75f, 1f, .25f, .25f, .25f, 1f}; float[] locations = new float[]{0f, 1f}; gradient = new CGGradient(colorSpace, components, locations); PointF startPoint = new PointF(0f, (float)iContentSize.Height); PointF endPoint = new PointF((float)iContentSize.Width, 0f); context.DrawLinearGradient(gradient, startPoint, endPoint, 0); context.SetLineWidth(Constants.lineWidth); context.BeginPath(); for (UInt16 i = 1; i <= RowCount; i++) { context.MoveTo (0f, iContentSize.Height - i * RowHeaderHeight + (Constants.lineWidth/2)); context.AddLineToPoint((float)iContentSize.Width, iContentSize.Height - i * RowHeaderHeight + (Constants.lineWidth/2)); } for (UInt16 j = 1; j <= ColumnCount; j++) { context.MoveTo((float)j * ColumnHeaderWidth - Constants.lineWidth/2, (float)iContentSize.Height); context.AddLineToPoint((float)j * ColumnHeaderWidth - Constants.lineWidth/2, 0f); } context.StrokePath(); image = UIImage.FromImage(context.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (gradient != null) { gradient.Dispose(); gradient = null; } if (context != null) { context.Dispose(); context = null; } if (colorSpace != null) { colorSpace.Dispose(); colorSpace = null; } // GC.Collect(); //GC.WaitForPendingFinalizers(); } UIImage finalImage = ActivateCell(1, 1, image); finalImage = ActivateCell(0, 0, finalImage); cellsImageView = new UIImageView(finalImage); cellsImageView.Frame = new RectangleF(0f, 0f, iContentSize.Width, iContentSize.Height); cellsScrollView.AddSubview(cellsImageView); } private UIImage ActivateCell(UInt16 column, UInt16 row, UIImage backgroundImage) { UInt16 ColumnHeaderWidth = (UInt16)spreadsheetMessenger.ColumnHeaderWidth; UInt16 RowHeaderHeight = (UInt16)spreadsheetMessenger.RowHeaderHeight; CGColorSpace cellColorSpace = null; CGBitmapContext cellContext = null; UIImage cellImage = null; IntPtr buffer = Marshal.AllocHGlobal(4 * ColumnHeaderWidth * RowHeaderHeight); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory: ActivateCell()"); try { cellColorSpace = CGColorSpace.CreateDeviceRGB(); // Create a bitmap the size of a cell cellContext = new CGBitmapContext (buffer, ColumnHeaderWidth, RowHeaderHeight, 8, 4 * ColumnHeaderWidth, cellColorSpace, CGImageAlphaInfo.PremultipliedFirst); // Paint it white cellContext.SetFillColorWithColor(UIColor.White.CGColor); cellContext.FillRect(new RectangleF(0f, 0f, ColumnHeaderWidth, RowHeaderHeight)); // Convert it to an image cellImage = UIImage.FromImage(cellContext.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (cellContext != null) { cellContext.Dispose(); cellContext = null; } if (cellColorSpace != null) { cellColorSpace.Dispose(); cellColorSpace = null; } // GC.Collect(); //GC.WaitForPendingFinalizers(); } // Draw the border on the cell image cellImage = DrawBottomRightCorner(cellImage); CGColorSpace colorSpace = null; CGBitmapContext context = null; Size iContentSize = new Size((int)backgroundImage.Size.Width, (int)backgroundImage.Size.Height); buffer = Marshal.AllocHGlobal(4 * iContentSize.Width * iContentSize.Height); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory: ActivateCell()."); try { colorSpace = CGColorSpace.CreateDeviceRGB(); // Set up a bitmap context the size of the whole grid context = new CGBitmapContext (buffer, iContentSize.Width, iContentSize.Height, 8, 4 * iContentSize.Width, colorSpace, CGImageAlphaInfo.PremultipliedFirst); // Draw the original grid into the bitmap context.DrawImage(new RectangleF(0f, 0f, iContentSize.Width, iContentSize.Height), backgroundImage.CGImage); // Draw the cell image into the bitmap context.DrawImage(new RectangleF(column * ColumnHeaderWidth, iContentSize.Height - (row + 1) * RowHeaderHeight, ColumnHeaderWidth, RowHeaderHeight), cellImage.CGImage); // Convert the bitmap back to an image backgroundImage = UIImage.FromImage(context.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (context != null) { context.Dispose(); context = null; } if (colorSpace != null) { colorSpace.Dispose(); colorSpace = null; } // GC.Collect(); //GC.WaitForPendingFinalizers(); } return backgroundImage; } private UIImage DrawBottomRightCorner(UIImage image) { int width = (int)image.Size.Width; int height = (int)image.Size.Height; float lineWidth = Constants.lineWidth; CGColorSpace colorSpace = null; CGBitmapContext context = null; UIImage returnImage = null; IntPtr buffer = Marshal.AllocHGlobal(4 * width * height); if (buffer == IntPtr.Zero) throw new OutOfMemoryException("Out of memory: DrawBottomRightCorner()."); try { colorSpace = CGColorSpace.CreateDeviceRGB(); context = new CGBitmapContext (buffer, width, height, 8, 4 * width, colorSpace, CGImageAlphaInfo.PremultipliedFirst); context.DrawImage(new RectangleF(0f, 0f, width, height), image.CGImage); context.BeginPath(); context.MoveTo(0f, (int)(lineWidth/2f)); context.AddLineToPoint(width - (int)(lineWidth/2f), (int)(lineWidth/2f)); context.AddLineToPoint(width - (int)(lineWidth/2f), height); context.SetLineWidth(Constants.lineWidth); context.SetStrokeColorWithColor(UIColor.Black.CGColor); context.StrokePath(); returnImage = UIImage.FromImage(context.ToImage()); } finally { Marshal.FreeHGlobal(buffer); if (context != null){ context.Dispose(); context = null;} if (colorSpace != null){ colorSpace.Dispose(); colorSpace = null;} // GC.Collect(); //GC.WaitForPendingFinalizers(); } return returnImage; } }

    Read the article

  • XNA Xbox 360 Content Manager Thread freezing Draw Thread

    - by Alikar
    I currently have a game that takes in large images, easily bigger than 1MB, to serve as backgrounds. I know exactly when this transition is supposed to take place, so I made a loader class to handle loading these large images in the background, but when I load the images it still freezes the main thread where the drawing takes place. Since this code runs on the 360 I move the thread to the 4th hardware thread, but that doesn't seem to help. Below is the class I am using. Any thoughts as to why my new content manager which should be in its own thread is interrupting the draw in my main thread would be appreciated. namespace FileSystem { /// <summary> /// This is used to reference how many objects reference this texture. /// Everytime someone references a texture we increase the iNumberOfReferences. /// When a class calls remove on a specific texture we check to see if anything /// else is referencing the class, if it is we don't remove it. If there isn't /// anything referencing the texture its safe to dispose of. /// </summary> class TextureContainer { public uint uiNumberOfReferences = 0; public Texture2D texture; } /// <summary> /// This class loads all the files from the Content. /// </summary> static class FileManager { static Microsoft.Xna.Framework.Content.ContentManager Content; static EventWaitHandle wh = new AutoResetEvent(false); static Dictionary<string, TextureContainer> Texture2DResourceDictionary; static List<Texture2D> TexturesToDispose; static List<String> TexturesToLoad; static int iProcessor = 4; private static object threadMutex = new object(); private static object Texture2DMutex = new object(); private static object loadingMutex = new object(); private static bool bLoadingTextures = false; /// <summary> /// Returns if we are loading textures or not. /// </summary> public static bool LoadingTexture { get { lock (loadingMutex) { return bLoadingTextures; } } } /// <summary> /// Since this is an static class. This is the constructor for the file loadeder. This is the version /// for the Xbox 360. /// </summary> /// <param name="_Content"></param> public static void Initalize(IServiceProvider serviceProvider, string rootDirectory, int _iProcessor ) { Content = new Microsoft.Xna.Framework.Content.ContentManager(serviceProvider, rootDirectory); Texture2DResourceDictionary = new Dictionary<string, TextureContainer>(); TexturesToDispose = new List<Texture2D>(); iProcessor = _iProcessor; CreateThread(); } /// <summary> /// Since this is an static class. This is the constructor for the file loadeder. /// </summary> /// <param name="_Content"></param> public static void Initalize(IServiceProvider serviceProvider, string rootDirectory) { Content = new Microsoft.Xna.Framework.Content.ContentManager(serviceProvider, rootDirectory); Texture2DResourceDictionary = new Dictionary<string, TextureContainer>(); TexturesToDispose = new List<Texture2D>(); CreateThread(); } /// <summary> /// Creates the thread incase we wanted to set up some parameters /// Outside of the constructor. /// </summary> static public void CreateThread() { Thread t = new Thread(new ThreadStart(StartThread)); t.Start(); } // This is the function that we thread. static public void StartThread() { //BBSThreadClass BBSTC = (BBSThreadClass)_oData; FileManager.Execute(); } /// <summary> /// This thread shouldn't be called by the outside world. /// It allows the File Manager to loop. /// </summary> static private void Execute() { // Make sure our thread is on the correct processor on the XBox 360. #if WINDOWS #else Thread.CurrentThread.SetProcessorAffinity(new int[] { iProcessor }); Thread.CurrentThread.IsBackground = true; #endif // This loop will load textures into ram for us away from the main thread. while (true) { wh.WaitOne(); // Locking down our data while we process it. lock (threadMutex) { lock (loadingMutex) { bLoadingTextures = true; } bool bContainsKey = false; for (int con = 0; con < TexturesToLoad.Count; con++) { // If we have already loaded the texture into memory reference // the one in the dictionary. lock (Texture2DMutex) { bContainsKey = Texture2DResourceDictionary.ContainsKey(TexturesToLoad[con]); } if (bContainsKey) { // Do nothing } // Otherwise load it into the dictionary and then reference the // copy in the dictionary else { TextureContainer TC = new TextureContainer(); TC.uiNumberOfReferences = 1; // We start out with 1 referece. // Loading the texture into memory. try { TC.texture = Content.Load<Texture2D>(TexturesToLoad[con]); // This is passed into the dictionary, thus there is only one copy of // the texture in memory. // There is an issue with Sprite Batch and disposing textures. // This will have to wait until its figured out. lock (Texture2DMutex) { bContainsKey = Texture2DResourceDictionary.ContainsKey(TexturesToLoad[con]); Texture2DResourceDictionary.Add(TexturesToLoad[con], TC); } // We don't have the find the reference to the container since we // already have it. } // Occasionally our texture will already by loaded by another thread while // this thread is operating. This mainly happens on the first level. catch (Exception e) { // If this happens we don't worry about it since this thread only loads // texture data and if its already there we don't need to load it. } } Thread.Sleep(100); } } lock (loadingMutex) { bLoadingTextures = false; } } } static public void LoadTextureList(List<string> _textureList) { // Ensuring that we can't creating threading problems. lock (threadMutex) { TexturesToLoad = _textureList; } wh.Set(); } /// <summary> /// This loads a 2D texture which represents a 2D grid of Texels. /// </summary> /// <param name="_textureName">The name of the picture you wish to load.</param> /// <returns>Holds the image data.</returns> public static Texture2D LoadTexture2D( string _textureName ) { TextureContainer temp; lock (Texture2DMutex) { bool bContainsKey = false; // If we have already loaded the texture into memory reference // the one in the dictionary. lock (Texture2DMutex) { bContainsKey = Texture2DResourceDictionary.ContainsKey(_textureName); if (bContainsKey) { temp = Texture2DResourceDictionary[_textureName]; temp.uiNumberOfReferences++; // Incrementing the number of references } // Otherwise load it into the dictionary and then reference the // copy in the dictionary else { TextureContainer TC = new TextureContainer(); TC.uiNumberOfReferences = 1; // We start out with 1 referece. // Loading the texture into memory. try { TC.texture = Content.Load<Texture2D>(_textureName); // This is passed into the dictionary, thus there is only one copy of // the texture in memory. } // Occasionally our texture will already by loaded by another thread while // this thread is operating. This mainly happens on the first level. catch(Exception e) { temp = Texture2DResourceDictionary[_textureName]; temp.uiNumberOfReferences++; // Incrementing the number of references } // There is an issue with Sprite Batch and disposing textures. // This will have to wait until its figured out. Texture2DResourceDictionary.Add(_textureName, TC); // We don't have the find the reference to the container since we // already have it. temp = TC; } } } // Return a reference to the texture return temp.texture; } /// <summary> /// Go through our dictionary and remove any references to the /// texture passed in. /// </summary> /// <param name="texture">Texture to remove from texture dictionary.</param> public static void RemoveTexture2D(Texture2D texture) { foreach (KeyValuePair<string, TextureContainer> pair in Texture2DResourceDictionary) { // Do our references match? if (pair.Value.texture == texture) { // Only one object or less holds a reference to the // texture. Logically it should be safe to remove. if (pair.Value.uiNumberOfReferences <= 1) { // Grabing referenc to texture TexturesToDispose.Add(pair.Value.texture); // We are about to release the memory of the texture, // thus we make sure no one else can call this member // in the dictionary. Texture2DResourceDictionary.Remove(pair.Key); // Once we have removed the texture we don't want to create an exception. // So we will stop looking in the list since it has changed. break; } // More than one Object has a reference to this texture. // So we will not be removing it from memory and instead // simply marking down the number of references by 1. else { pair.Value.uiNumberOfReferences--; } } } } /*public static void DisposeTextures() { int Count = TexturesToDispose.Count; // If there are any textures to dispose of. if (Count > 0) { for (int con = 0; con < TexturesToDispose.Count; con++) { // =!THIS REMOVES THE TEXTURE FROM MEMORY!= // This is not like a normal dispose. This will actually // remove the object from memory. Texture2D is inherited // from GraphicsResource which removes it self from // memory on dispose. Very nice for game efficency, // but "dangerous" in managed land. Texture2D Temp = TexturesToDispose[con]; Temp.Dispose(); } // Remove textures we've already disposed of. TexturesToDispose.Clear(); } }*/ /// <summary> /// This loads a 2D texture which represnets a font. /// </summary> /// <param name="_textureName">The name of the font you wish to load.</param> /// <returns>Holds the font data.</returns> public static SpriteFont LoadFont( string _fontName ) { SpriteFont temp = Content.Load<SpriteFont>( _fontName ); return temp; } /// <summary> /// This loads an XML document. /// </summary> /// <param name="_textureName">The name of the XML document you wish to load.</param> /// <returns>Holds the XML data.</returns> public static XmlDocument LoadXML( string _fileName ) { XmlDocument temp = Content.Load<XmlDocument>( _fileName ); return temp; } /// <summary> /// This loads a sound file. /// </summary> /// <param name="_fileName"></param> /// <returns></returns> public static SoundEffect LoadSound( string _fileName ) { SoundEffect temp = Content.Load<SoundEffect>(_fileName); return temp; } } }

    Read the article

  • CSS Hidden DIV Scroll to view

    - by Dasa
    <DIV CLASS="fact" ID="xnews-4" > <DIV CLASS="storyheadline"> <DIV CLASS="vote up"><A ID="xvotes-4" HREF="javascript:vote(0,258160,4,'f3d3d9c1885fb8508bdbde825d0dfd6e',10)">1</A><A ID="xvote-4" HREF="javascript:vote(0,258160,4,'f3d3d9c1885fb8508bdbde825d0dfd6e',10)"><strong>Vote</strong></A> </DIV> <DIV CLASS="title" ID="title-4"><H2><A HREF="/story.php?title=this-article-is-about-the-song">This article is about the song.</A></H2> </DIV> </DIV> <DIV CLASS="storycontent subtext hidden" ID="plus4" style="display: none;"> <DIV>Posted by <A HREF="/user.php?login=fact-o-matic">fact-o-matic</A> 2 minutes ago | Source: Editorial<SPAN ID="ls_adminlinks-4" style="display:none"> </SPAN> </DIV> <DIV> <DIV CLASS="floatleft"> <A HREF="/story.php?title=this-article-is-about-the-song"> Read More</A>&nbsp;|<SPAN ID="ls_comments_url-4"> <SPAN CLASS="linksummaryDiscuss"><A HREF="/story.php?title=this-article-is-about-the-song#discuss" CLASS="comments">Discuss</A></SPAN></SPAN> <SPAN ID="xreport-4"><SPAN CLASS="linksummaryBury">| <A HREF="javascript:vote(0,258160,4,'f3d3d9c1885fb8508bdbde825d0dfd6e',-10)">Bury</A></SPAN></SPAN> |&nbsp; <span id="emailto-4" style="display:none"></span><span id="linksummaryAddLink"> <a href="javascript://" onclick="var replydisplay=document.getElementById('addto-4').style.display ? '' : 'none';document.getElementById('addto-4').style.display = replydisplay;"> Add To</a>&nbsp; </span> <span id="addto-4" style="display:none"> <div style="position:absolute;display:block;background:#fff;padding:10px;margin:10px 0 0 100px;font-size:12px;border:2px solid #000;"> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to del.icio.us" href="http://del.icio.us/post" onclick="window.open('http://del.icio.us/post?v=4&amp;noui&amp;jump=close&amp;url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&amp;title=This+article+is+about+the+song.', '','toolbar=no,width=700,height=400'); return false;"><img src="http://www.factmeme.com/modules/social_bookmark/images/delicious.png" border="0" alt="submit 'This article is about the song.' to del.icio.us" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to digg" href="http://digg.com/submit?phase=2&amp;url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&amp;title=This article is about the song.&amp;bodytext="><img src="http://www.factmeme.com/modules/social_bookmark/images/digg.png" border="0" alt="submit 'This article is about the song.' to digg" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to reddit" href="http://reddit.com/submit?url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&amp;title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/reddit.gif" border="0" alt="submit 'This article is about the song.' to reddit" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to facebook" href="http://www.facebook.com/sharer.php?u=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&t=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/facebook.gif" border="0" alt="submit 'This article is about the song.' to facebook" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to technorati" href="http://www.technorati.com/faves?add=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song"><img src="http://www.factmeme.com/modules/social_bookmark/images/technorati.gif" border="0" alt="submit 'This article is about the song.' to technorati" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to slashdot" href="http://slashdot.org/bookmark.pl?url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/slashdot.gif" border="0" alt="submit 'This article is about the song.' to slashdot" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to Stumbleupon" href="http://www.stumbleupon.com/submit?url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&amp;title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/icon-stumbleupon.gif" border="0" alt="submit 'This article is about the song.' to Stumbleupon" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to Windows Live" href="https://favorites.live.com/quickadd.aspx?url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/windowslive.gif" border="0" alt="submit 'This article is about the song.' to Windows Live" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to squidoo" href="http://www.squidoo.com/lensmaster/bookmark?http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song"><img src="http://www.factmeme.com/modules/social_bookmark/images/squidoo.gif" border="0" alt="submit 'This article is about the song.' to squidoo" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to yahoo" href="http://myweb2.search.yahoo.com/myresults/bookmarklet?u=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&amp;title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/yahoomyweb.png" border="0" alt="submit 'This article is about the song.' to yahoo" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to google" href="http://www.google.com/bookmarks/mark?op=edit&bkmk=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/googlebookmarks.gif" border="0" alt="submit 'This article is about the song.' to google" /></a> &nbsp;&nbsp;<a title="submit 'This article is about the song.' to ask" href=" http://myjeeves.ask.com/mysearch/BookmarkIt?v=1.2&t=webpages&url=http%3A%2F%2Fwww.factmeme.com%2Fstory.php%3Ftitle%3Dthis-article-is-about-the-song&title=This article is about the song."><img src="http://www.factmeme.com/modules/social_bookmark/images/ask.gif" border="0" alt="submit 'This article is about the song.' to ask" /></a> <hr /> <p style="font-size:16px;font-weight:bold;margin:0px;">Story URL</p> <script type="text/javascript"> function select_all() { var text_val=eval("document.storyurl.thisurl"); text_val.focus(); text_val.select(); } </script> <form name="storyurl"><input type="text" name="thisurl" size="92" onClick="select_all();" value="http://www.factmeme.com/story.php?title=this-article-is-about-the-song"></form> </div> </span> </DIV> <DIV CLASS="floatright"> <A HREF="/index.php?category=culture">Culture</A> | <A HREF="/search.php?search=Olavi&amp;tag=true">Olavi</A> <A HREF="/search.php?search=Olavi&amp;tag=true">All</A> </DIV> </DIV></DIV> <DIV CLASS="more show"></DIV> </DIV> when I click on the add to, a box is supposed to popup with options to add the story to other websites The problem is that nothing appears to happen, even though something is actually happening, the only way to see the add too box is to click on scroll to view in inspect element in firefox and even then the box appears in the wrong place I am almost certain that it is a positioning conflict but I cant work it out How can I fix it

    Read the article

  • How do I send automated e-mails from Drupal using Messaging and Notifications?

    - by Adrian
    I am working on a Notifications plugin, and after starting to write my notes down about how to do this, decided to just post them here. Please feel free to come make modifications and changes. Eventually I hope to post this on the Drupal handbook as well. Thanks. --Adrian Sending automated e-mails from Drupal using Messaging and Notifications To implement a notifications plugin, you must implement the following functions: Use hook_messaging, hook_token_list and hook_token_values to create the messages that will be sent. Use hook_notifications to create the subscription types Add code to fire events (eg in hook_nodeapi) Add all UI elements to allow users to subscribe/unsubscribe Understanding Messaging The Messaging module is used to compose messages that can be delivered using various formats, such as simple mail, HTML mail, Twitter updates, etc. These formats are called "send methods." The backend details do not concern us here; what is important are the following concepts: TOKENS: tokens are provided by the "tokens" module. They allow you to write keywords in square brackets, [like-this], that can be replaced by any arbitrary value. Note: the token groups you create must match the keys you add to the $events-objects[$key] array. MESSAGE KEYS: A key is a part of a message, such as the greetings line. Keys can be different for each send method. For example, a plaintext mail's greeting might be "Hi, [user]," while an HTML greeing might be "Hi, [user]," and Twitter's might just be "[user-firstname]: ". Keys can have any arbitrary name. Keys are very simple and only have a machine-readable name and a user-readable description, the latter of which is only seen by admins. MESSAGE GROUPS: A group is a bunch of keys that often, but not always, might be used together to make up a complete message. For example, a generic group might include keys for a greeting, body, closing and footer. Groups can also be "subclassed" by selecting a "fallback" group that will supply any keys that are missing. Groups are also associated with modules; I'm not sure what these are used for. Understanding Notifications The Notifications module revolves around the following concepts: SUBSCRIPTIONS: Notifications plugins may define one or more types of subscriptions. For example, notifications_content defines subscriptions for: Threads (users are notified whenever a node or its comments change) Content types (users are notified whenever a node of a certain type is created or is changed) Users (users are notified whenever another user is changed) Subscriptions refer to both the user who's subscribed, how often they wish to be notified, the send method (for Messaging) and what's being subscribed to. This last part is defined in two steps. Firstly, a plugin defines several "subscription fields" (through a hook_notifications op of the same name), and secondly, "subscription types" (also an op) defines which fields apply to each type of subscription. For example, notifications_content defines the fields "nid," "author" and "type," and the subscriptions "thread" (nid), "nodetype" (type), "author" (author) and "typeauthor" (type and author), the latter referring to something like "any STORY by JOE." Fields are used to link events to subscriptions; an event must match all fields of a subscription (for all normal subscriptions) to be delivered to the recipient. The $subscriptions object is defined in subsequent sections. Notifications prefers that you don't create these objects yourself, preferring you to call the notifications_get_link() function to create a link that users may click on, but you can also use notifications_save_subscription and notifications_delete_subscription to do it yourself. EVENTS: An event is something that users may be notified about. Plugins create the $event object then call notifications_event($event). This either sends out notifications immediately, queues them to send out later, or both. Events include the type of thing that's changed (eg 'node', 'user'), the ID of the thing that's changed (eg $node-nid, $user-uid) and what's happened to it (eg 'create'). These are, respectively, $event-type, $event-oid (object ID) and $event-action. Warning: notifications_content_nodeapi also adds a $event-node field, referring to the node itself and not just $event-oid = $node-nid. This is not used anywhere in the core notifications module; however, when the $event is passed back to the 'query' op (see below), we assume the node is still present. Events do not refer to the user they will be referred to; instead, Notifications makes the connection between subscriptions and events, using the subscriptions' fields. MATCHING EVENTS TO SUBSCRIPTIONS: An event matches a subscription if it has the same type as the event (eg "node") and if the event matches all the correct fields. This second step is determined by the "query" hook op, which is called with the $event object as a parameter. The query op is responsible for giving Notifications a value for all the fields defined by the plugin. For example, notifications_content defines the 'nid', 'type' and 'author' fields, so its query op looks like this (ignore the case where $event_or_user = 'user' for now): $event_or_user = $arg0; $event_type = $arg1; $event_or_object = $arg2; if ($event_or_user == 'event' && $event_type == 'node' && ($node = $event_or_object->node) || $event_or_user == 'user' && $event_type == 'node' && ($node = $event_or_object)) { $query[]['fields'] = array( 'nid' => $node->nid, 'type' => $node->type, 'author' => $node->uid, ); return $query; After extracting the $node from the $event, we set $query[]['fields'] to a dictionary defining, for this event, all the fields defined by the module. As you can tell from the presence of the $query object, there's way more you can do with this op, but they are not covered here. DIGESTING AND DEDUPING: Understanding the relationship between Messaging and Notifications Usually, the name of a message group doesn't matter, but when being used with Notifications, the names must follow very strict patterns. Firstly, they must start with the name "notifications," and then are followed by either "event" or "digest," depending on whether the message group is being used to represent either a single event or a group of events. For 'events,' the third part of the name is the "type," which we get from Notification's $event-type (eg: notifications_content uses 'node'). The last part of the name is the operation being performed, which comes from Notification's $event-action. For example: notifications-event-node-comment might refer to the message group used when someone comments on a node notifications-event-user-update to a user who's updated their profile Hyphens cannot appear anywhere other than to separate the parts of these words. For 'digest' messages, the third and fourth part of the name come from hook_notification's "event types" callback, specifically this line: $types[] = array( 'type' => 'node', 'action' => 'insert', ... 'digest' => array('node', 'type'), ); $types[] = array( 'type' => 'node', 'action' => 'update', ... 'digest' => array('node', 'nid'), ); In this case, the first event type (node insertion) will be digested with the notifications-digest-node-type message template providing the header and footer, likely saying something like "the following [type] was created." The second event type (node update) will be digested with the notifications-digest-node-nid message template. Data Structure and Callback Reference $event The $event object has the following members: $event-type: The type of event. Must match the type in hook_notification::"event types". {notifications_event} $event-action: The action the event describes. Most events are sorted by [$event-type][$event-action]. {notifications_event}. $event-object[$object_type]: All objects relevant to the event. For example, $event-object['node'] might be the node that the event describes. $object_type can come from the 'event types' hook (see below). The main purpose appears to be to be passed to token_replace_multiple as the second parameter. $event-object[$event-type] is assumed to exist in the short digest processing functions, but this doesn't appear to be used anywhere. Not saved in the database; loaded by hook_notifications::"event load" $event-oid: apparently unused. The id of the primary object relevant to this event (eg the node's nid). $event-module: apparently unused $event-params[$key]: Mainly a place for plugins to save random data. The main module will serialize the contents of this array but does not use it in any way. However, notifications_ui appears to do something weird with it, possibly by using subscriptions' fields as keys into this array. I'm not sure why though. hook_notifications op 'subscription types': returns an array of subscription types provided by the plugin, in the form $key = array(...) with the following members: event_type: this subscription can only match events whose $event-type has this value. Stored in the database as notifications.event_type for every individual subscription. Apparently, this can be overiden in code but I wouldn't try it (see notifications_save_subscription). fields: an unkeyed array of fields that must be matched by an event (in addition to the event_type) for it to match this subscription. Each element of this array must be a key of the array returned by op 'subscription fields' which in turn must be used by op 'query' to actually perform the matching. title: user-readable title for their subscriptions page (eg the 'type' column in user/%uid/notifications/subscriptions) description: a user-readable description. page callback: used to add a supplementary page at user/%uid/notifications/blah. This and the following are used by notifications_ui as a part of hook_menu_alter. Appears to be partially deprecated. user page: user/%uid/notifications/blah. op 'event types': returns an array of event types, with each event type being an array with the following members: type: this will match $event-type action: this will match $event-action digest: an array with two ordered (non-keyed) elements, "type" and "field." 'type' is used as an index into $event-objects. 'field' is also used to group events like so: $event-objects[$type]-$field. For example, 'field' might be 'nid' - if the object is a node, the digest lines will be grouped by node ID. Finally, both are used to find the correct Messaging template; see discussion above. description: used on the admin "Notifications-Events" page name: unused, use Messaging instead line: deprecated, use Messaging instead Other Stuff This is an example of the main query that inserts an event into the queue: INSERT INTO {notifications_queue} (uid, destination, sid, module, eid, send_interval, send_method, cron, created, conditions) SELECT DISTINCT s.uid, s.destination, s.sid, s.module, %d, // event ID s.send_interval, s.send_method, s.cron, %d, // time of the event s.conditions FROM {notifications} s INNER JOIN {notifications_fields} f ON s.sid = f.sid WHERE (s.status = 1) AND (s.event_type = '%s') // subscription type AND (s.send_interval >= 0) AND (s.uid <> %d) AND ( (f.field = '%s' AND f.intval IN (%d)) // everything from 'query' op OR (f.field = '%s' AND f.intval = %d) OR (f.field = '%s' AND f.value = '%s') OR (f.field = '%s' AND f.intval = %d)) GROUP BY s.uid, s.destination, s.sid, s.module, s.send_interval, s.send_method, s.cron, s.conditions HAVING s.conditions = count(f.sid)

    Read the article

  • Help debugging c fifos code - stack smashing detected - open call not functioning - removing pipes

    - by nunos
    I have three bugs/questions regarding the source code pasted below: stack smashing deteced: In order to compile and not have that error I have addedd the gcc compile flag -fno-stack-protector. However, this should be just a temporary solution, since I would like to find where the cause for this is and correct it. However, I haven't been able to do so. Any clues? For some reason, the last open function call doesn't work and the programs just stops there, without an error, even though the fifo already exists. I want to delete the pipes from the filesystem after before terminating the processes. I have added close and unlink statements at the end, but the fifos are not removed. What am I doing wrong? Thanks very much in advance. P.S.: I am pasting here the whole source file for additional clarity. Just ignore the comments, since they are in my own native language. server.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define FIFO_NAME_MAX_LEN 20 #define FIFO_DIR "/tmp/" #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" typedef enum { false, true } bool; bool background = false; char* logfile = NULL; void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); read(fd, *var, n_bytes); printf("read %d bytes '%s'\n", n_bytes, *var); } void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } int main(int argc, char* argv[]) { //CRIA FIFO CMD_CLI_TO_SRV, se ainda nao existir char* fifo_name_cmd_cli_to_srv; fifo_name_cmd_cli_to_srv = (char*) malloc ( (strlen(FIFO_NAME_CMD_CLI_TO_SRV) + strlen(FIFO_DIR) + 1) * sizeof(char) ); strcpy(fifo_name_cmd_cli_to_srv, FIFO_DIR); strcat(fifo_name_cmd_cli_to_srv, FIFO_NAME_CMD_CLI_TO_SRV); int n = mkfifo(fifo_name_cmd_cli_to_srv, 0660); //TODO ver permissoes if (n < 0 && errno != EEXIST) //se houver erro, e nao for por causa de ja haver um com o mesmo nome, termina o programa { fprintf(stderr, "erro ao criar o fifo\n"); fprintf(stderr, "errno: %d\n", errno); exit(4); } //se por acaso já existir, nao cria o fifo e continua o programa normalmente //le informacao enviada pelo cliente, nesta ordem: //1. pid (em formato char*) do processo cliente //2. comando /CONNECT //3. nome de fifo INFO_SRV_TO_CLIXXX //4. nome de fifo MSG_SRV_TO_CLIXXX char* command; char* fifo_name_info_srv_to_cli; char* fifo_name_msg_srv_to_cli; char* client_pid_string; int client_pid; int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open(fifo_name_cmd_cli_to_srv, O_RDONLY); read_from_fifo(fd_cmd_cli_to_srv, &client_pid_string); client_pid = atoi(client_pid_string); read_from_fifo(fd_cmd_cli_to_srv, &command); //recebe commando /CONNECT read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_info_srv_to_cli); //recebe nome de fifo INFO_SRV_TO_CLIXXX read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_msg_srv_to_cli); //recebe nome de fifo MSG_TO_SRV_TO_CLIXXX //CIRA FIFO MSG_CLIXXX_TO_SRV char fifo_name_msg_cli_to_srv[FIFO_NAME_MAX_LEN]; strcpy(fifo_name_msg_cli_to_srv, FIFO_DIR); strcat(fifo_name_msg_cli_to_srv, "lrc_msg_cli"); strcat(fifo_name_msg_cli_to_srv, client_pid_string); strcat(fifo_name_msg_cli_to_srv, "_to_srv"); n = mkfifo(fifo_name_msg_cli_to_srv, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_msg_cli_to_srv); fprintf(stderr, "errno: %d\n", errno); exit(5); } //envia ao cliente a resposta ao commando /CONNECT fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_WRONLY); write_to_fifo(fd_info_srv_to_cli, fifo_name_msg_cli_to_srv); free(logfile); free(fifo_name_cmd_cli_to_srv); close(fd_cmd_cli_to_srv); unlink(fifo_name_cmd_cli_to_srv); unlink(fifo_name_msg_cli_to_srv); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } client.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define PID_BUFFER_LEN 10 #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" #define FIFO_NAME_INFO_SRV_TO_CLI "lrc_info_srv_to_cli" #define FIFO_NAME_MSG_SRV_TO_CLI "lrc_msg_srv_to_cli" #define COMMAND_MAX_LEN 100 #define FIFO_DIR "/tmp/" typedef enum { false, true } bool; char* nickname; char* name; char* email; void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); printf("read '%s'\n", *var); read(fd, *var, n_bytes); } int main(int argc, char* argv[]) { pid_t pid = getpid(); //CRIA FIFO INFO_SRV_TO_CLIXXX char pid_string[PID_BUFFER_LEN]; sprintf(pid_string, "%d", pid); char* fifo_name_info_srv_to_cli; fifo_name_info_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_INFO_SRV_TO_CLI) + strlen(pid_string) + 1 ) * sizeof(char) ); strcpy(fifo_name_info_srv_to_cli, FIFO_DIR); strcat(fifo_name_info_srv_to_cli, FIFO_NAME_INFO_SRV_TO_CLI); strcat(fifo_name_info_srv_to_cli, pid_string); int n = mkfifo(fifo_name_info_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(6); } int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open("/tmp/lrc_cmd_cli_to_srv", O_WRONLY); char command[COMMAND_MAX_LEN]; printf("> "); scanf("%s", command); while (strcmp(command, "/CONNECT")) { printf("O primeiro comando deverá ser \"/CONNECT\"\n"); printf("> "); scanf("%s", command); } //CRIA FIFO MSG_SRV_TO_CLIXXX char* fifo_name_msg_srv_to_cli; fifo_name_msg_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_MSG_SRV_TO_CLI) + strlen(pid_string) + 1) * sizeof(char) ); strcpy(fifo_name_msg_srv_to_cli, FIFO_DIR); strcat(fifo_name_msg_srv_to_cli, FIFO_NAME_MSG_SRV_TO_CLI); strcat(fifo_name_msg_srv_to_cli, pid_string); n = mkfifo(fifo_name_msg_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(7); } // ENVIA COMANDO /CONNECT write_to_fifo(fd_cmd_cli_to_srv, pid_string); //envia pid do processo cliente write_to_fifo(fd_cmd_cli_to_srv, command); //envia commando /CONNECT write_to_fifo(fd_cmd_cli_to_srv, fifo_name_info_srv_to_cli); //envia nome de fifo INFO_SRV_TO_CLIXXX write_to_fifo(fd_cmd_cli_to_srv, fifo_name_msg_srv_to_cli); //envia nome de fifo MSG_TO_SRV_TO_CLIXXX // recebe do servidor a resposta ao comanddo /CONNECT printf("msg1\n"); printf("vamos tentar abrir %s\n", fifo_name_info_srv_to_cli); fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_RDONLY); printf("%s aberto", fifo_name_info_srv_to_cli); if (fd_info_srv_to_cli < 0) { fprintf(stderr, "erro ao criar %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); } printf("msg2\n"); char* fifo_name_msg_cli_to_srv; printf("msg3\n"); read_from_fifo(fd_info_srv_to_cli, &fifo_name_msg_cli_to_srv); printf("msg4\n"); free(nickname); free(name); free(email); free(fifo_name_info_srv_to_cli); free(fifo_name_msg_srv_to_cli); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } makefile: CC = gcc CFLAGS = -Wall -lpthread -fno-stack-protector all: client server client: client.c $(CC) $(CFLAGS) client.c -o client server: server.c $(CC) $(CFLAGS) server.c -o server clean: rm -f client server *~

    Read the article

  • Jquery Flexslider - can't see navigational images (manualControl)

    - by Kim Thomas
    I've spent a lot of time looking at the post on 3/13/12 re: manual controls, but isn't getting me all the way there...probably because I don't know jquery. Sorry, newbie on board. I'm trying to get the right/left arrows to show, as well as the 1, 2, 3...at the bottom. They are there, I see the lists on Firebug, just don't know how to add them to the "hook" (?) so they appear. Here is the code I have in header: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script> <script src="jquery.flexslider.js"></script> <script type="text/javascript" charset="utf-8"> $(window).load(function() { $('.flexslider').flexslider({ animation: "slide", slideshow: false, controlNav: true, manualControls: ".flex-control-nav li a", controlsContainer: ".flex-container" }); }); </script> Here is my html: <div class="flex-container"> <div class="flexslider"> <ul class="slides"> <li><img src="images/tah_home.jpg" alt="taylor art house home page" width="600" height="320"/> <p class="flex-caption">Taylor Art House Home Page</p></li> <li><img src="images/tah_blog.jpg" alt="taylor art house blog page" width="600" height="320" /> <p class="flex-caption">We created a blog that fits seemlessly into Taylor Art House's look</p></li> <li><img src="images/tah_artwork_page.jpg" alt="taylor art house art page" width="600" height="320" /> <p class="flex-caption">One of Taylor Art House's gallery pages, using a Wordpress plugin</p></li> <li><img src="images/tah_arch_portfolio.jpg" alt="jon taylor architecture portfolio page" width="600" height="320" /> <p class="flex-caption">We created links to toggle from TAH to Jon Taylor Architecture</p></li> </ul> </div><!--end flexsider--> </div><!--end flex-container--> Here is the Flexslider CSS: /* * jQuery FlexSlider v1.8 * http://www.woothemes.com/flexslider/ * * Copyright 2012 WooThemes * Free to use under the MIT license. * http://www.opensource.org/licenses/mit-license.php */ /* Browser Resets */ .flex-container a:active, .flexslider a:active, .flex-container a:focus, .flexslider a:focus {outline: none;} .slides, .flex-control-nav, .flex-direction-nav {margin: 0; padding: 0; list-style: none;} /* FlexSlider Necessary Styles *********************************/ .flexslider { width: 100%; margin: 0; padding: 0; } .flexslider .slides > li { display: none; -webkit-backface-visibility: hidden; } /* Hide the slides before the JS is loaded. Avoids image jumping */ .flexslider .slides img { max-width: 100%; display: block; } .flex-pauseplay span { text-transform: capitalize; } /* Clearfix for the .slides element */ .slides:after { content: "."; display: block; clear: both; visibility: hidden; line-height: 0; height: 0; } html[xmlns] .slides { display: block; } * html .slides { height: 1%; } /* No JavaScript Fallback */ /* If you are not using another script, such as Modernizr, make sure you * include js that eliminates this class on page load */ .no-js .slides > li:first-child { display: block; } /* FlexSlider Default Theme *********************************/ .flexslider { width: 600px; background: #fff; border: 4px solid #999; position: relative; margin: 30px 0; -webkit-border-radius: 5px; -moz-border-radius: 5px; -o-border-radius: 5px; border-radius: 5px; zoom: 1; } .flexslider .slides { zoom: 1; } .flexslider .slides > li { position: relative; } /* Suggested container for "Slide" animation setups. Can replace this with your own, if you wish */ .flex-container { zoom: 1; position: relative; margin-left:100px; } /* Caption style */ /* IE rgba() hack */ .flex-caption { background:none; -ms-filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); zoom: 1; } .flex-caption { width: 96%; padding: 2%; margin: 0; position: absolute; left: 0; bottom: 0; background: rgba(0,0,0,.3); color: #fff; text-shadow: 0 -1px 0 rgba(0,0,0,.3); font-size: 14px; line-height: 18px; } /* Direction Nav */ .flex-direction-nav { height: 0; } .flex-direction-nav li a { width: 52px; height: 52px; margin: -13px 0 0; display: block; background: url(theme/bg_direction_nav.png) no-repeat; position: absolute; top: 50%; cursor: pointer; text-indent: -999em; } .flex-direction-nav li .next { background-position: -52px 0; right: -21px; } .flex-direction-nav li .prev { left: -20px; } .flex-direction-nav li .disabled { opacity: .3; filter:alpha(opacity=30); cursor: default; } /* Control Nav */ .flex-control-nav { width: 100%; position: absolute; bottom: -30px; text-align: center; } .flex-control-nav li { margin: 0 0 0 5px; display: inline-block; zoom: 1; *display: inline; } .flex-control-nav li:first-child { margin: 0; } .flex-control-nav li a { width: 13px; height: 13px; display: block; background: url(theme/bg_control_nav.png) no-repeat; cursor: pointer; text-indent: -999em; } .flex-control-nav li a:hover { background-position: 0 -13px; } .flex-control-nav li a.active { background-position: 0 -26px; cursor: default; } Here is how it appears in Firebug: <div class="flex-container"> <div class="flexslider" style="overflow: hidden;"> <ul class="slides" style="width: 1200%; margin-left: -1800px;"> <li class="clone" style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li class="clone" style="width: 600px; float: left; display: block;"> </ul> </div> <ol class="flex-control-nav"> <li> <a class="">1</a> </li> <li> <li> <li> </ol> <ul class="flex-direction-nav"> <li> <a class="prev" href="#">Previous</a> </li> <li> <a class="next" href="#">Next</a> </li> </ul> </div> Finally, here is a link to the jsFiddle file (I saw someone wanted that in other flexslider post): http://jsfiddle.net/kthms/Wxmsp/ Link to page: http://www.kajortdesigns.com/tah.php I've tried every combo of class from the CSS in the manualControl: "", but I'm just guessing. If anyone can help this newbie out, I would be very appreciative. Explicit instructions are always appreciated.

    Read the article

  • Advantage Database Server: slow stored procedure performance.

    - by ie
    I have a question about a performance of stored procedures in the ADS. I created a simple database with the following structure: CREATE TABLE MainTable ( Id INTEGER PRIMARY KEY, Name VARCHAR(50), Value INTEGER ); CREATE UNIQUE INDEX MainTableName_UIX ON MainTable ( Name ); CREATE TABLE SubTable ( Id INTEGER PRIMARY KEY, MainId INTEGER, Name VARCHAR(50), Value INTEGER ); CREATE INDEX SubTableMainId_UIX ON SubTable ( MainId ); CREATE UNIQUE INDEX SubTableName_UIX ON SubTable ( Name ); CREATE PROCEDURE CreateItems ( MainName VARCHAR ( 20 ), SubName VARCHAR ( 20 ), MainValue INTEGER, SubValue INTEGER, MainId INTEGER OUTPUT, SubId INTEGER OUTPUT ) BEGIN DECLARE @MainName VARCHAR ( 20 ); DECLARE @SubName VARCHAR ( 20 ); DECLARE @MainValue INTEGER; DECLARE @SubValue INTEGER; DECLARE @MainId INTEGER; DECLARE @SubId INTEGER; @MainName = (SELECT MainName FROM __input); @SubName = (SELECT SubName FROM __input); @MainValue = (SELECT MainValue FROM __input); @SubValue = (SELECT SubValue FROM __input); @MainId = (SELECT MAX(Id)+1 FROM MainTable); @SubId = (SELECT MAX(Id)+1 FROM SubTable ); INSERT INTO MainTable (Id, Name, Value) VALUES (@MainId, @MainName, @MainValue); INSERT INTO SubTable (Id, Name, MainId, Value) VALUES (@SubId, @SubName, @MainId, @SubValue); INSERT INTO __output SELECT @MainId, @SubId FROM system.iota; END; CREATE PROCEDURE UpdateItems ( MainName VARCHAR ( 20 ), MainValue INTEGER, SubValue INTEGER ) BEGIN DECLARE @MainName VARCHAR ( 20 ); DECLARE @MainValue INTEGER; DECLARE @SubValue INTEGER; DECLARE @MainId INTEGER; @MainName = (SELECT MainName FROM __input); @MainValue = (SELECT MainValue FROM __input); @SubValue = (SELECT SubValue FROM __input); @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = @MainName); UPDATE MainTable SET Value = @MainValue WHERE Id = @MainId; UPDATE SubTable SET Value = @SubValue WHERE MainId = @MainId; END; CREATE PROCEDURE SelectItems ( MainName VARCHAR ( 20 ), CalculatedValue INTEGER OUTPUT ) BEGIN DECLARE @MainName VARCHAR ( 20 ); @MainName = (SELECT MainName FROM __input); INSERT INTO __output SELECT m.Value * s.Value FROM MainTable m INNER JOIN SubTable s ON m.Id = s.MainId WHERE m.Name = @MainName; END; CREATE PROCEDURE DeleteItems ( MainName VARCHAR ( 20 ) ) BEGIN DECLARE @MainName VARCHAR ( 20 ); DECLARE @MainId INTEGER; @MainName = (SELECT MainName FROM __input); @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = @MainName); DELETE FROM SubTable WHERE MainId = @MainId; DELETE FROM MainTable WHERE Id = @MainId; END; Actually, the problem I had - even so light stored procedures work very-very slow (about 50-150 ms) relatively to plain queries (0-5ms). To test the performance, I created a simple test (in F# using ADS ADO.NET provider): open System; open System.Data; open System.Diagnostics; open Advantage.Data.Provider; let mainName = "main name #"; let subName = "sub name #"; // INSERT let cmdTextScriptInsert = " DECLARE @MainId INTEGER; DECLARE @SubId INTEGER; @MainId = (SELECT MAX(Id)+1 FROM MainTable); @SubId = (SELECT MAX(Id)+1 FROM SubTable ); INSERT INTO MainTable (Id, Name, Value) VALUES (@MainId, :MainName, :MainValue); INSERT INTO SubTable (Id, Name, MainId, Value) VALUES (@SubId, :SubName, @MainId, :SubValue); SELECT @MainId, @SubId FROM system.iota;"; let cmdTextProcedureInsert = "CreateItems"; // UPDATE let cmdTextScriptUpdate = " DECLARE @MainId INTEGER; @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = :MainName); UPDATE MainTable SET Value = :MainValue WHERE Id = @MainId; UPDATE SubTable SET Value = :SubValue WHERE MainId = @MainId;"; let cmdTextProcedureUpdate = "UpdateItems"; // SELECT let cmdTextScriptSelect = " SELECT m.Value * s.Value FROM MainTable m INNER JOIN SubTable s ON m.Id = s.MainId WHERE m.Name = :MainName;"; let cmdTextProcedureSelect = "SelectItems"; // DELETE let cmdTextScriptDelete = " DECLARE @MainId INTEGER; @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = :MainName); DELETE FROM SubTable WHERE MainId = @MainId; DELETE FROM MainTable WHERE Id = @MainId;"; let cmdTextProcedureDelete = "DeleteItems"; let cnnStr = @"data source=D:\DB\test.add; ServerType=local; user id=adssys; password=***;"; let cnn = new AdsConnection(cnnStr); try cnn.Open(); let cmd = cnn.CreateCommand(); let parametrize ix prms = cmd.Parameters.Clear(); let addParam = function | "MainName" -> cmd.Parameters.Add(":MainName" , mainName + ix.ToString()) |> ignore; | "SubName" -> cmd.Parameters.Add(":SubName" , subName + ix.ToString() ) |> ignore; | "MainValue" -> cmd.Parameters.Add(":MainValue", ix * 3 ) |> ignore; | "SubValue" -> cmd.Parameters.Add(":SubValue" , ix * 7 ) |> ignore; | _ -> () prms |> List.iter addParam; let runTest testData = let (cmdType, cmdName, cmdText, cmdParams) = testData; let toPrefix cmdType cmdName = let prefix = match cmdType with | CommandType.StoredProcedure -> "Procedure-" | CommandType.Text -> "Script -" | _ -> "Unknown -" in prefix + cmdName; let stopWatch = new Stopwatch(); let runStep ix prms = parametrize ix prms; stopWatch.Start(); cmd.ExecuteNonQuery() |> ignore; stopWatch.Stop(); cmd.CommandText <- cmdText; cmd.CommandType <- cmdType; let startId = 1500; let count = 10; for id in startId .. startId+count do runStep id cmdParams; let elapsed = stopWatch.Elapsed; Console.WriteLine("Test '{0}' - total: {1}; per call: {2}ms", toPrefix cmdType cmdName, elapsed, Convert.ToInt32(elapsed.TotalMilliseconds)/count); let lst = [ (CommandType.Text, "Insert", cmdTextScriptInsert, ["MainName"; "SubName"; "MainValue"; "SubValue"]); (CommandType.Text, "Update", cmdTextScriptUpdate, ["MainName"; "MainValue"; "SubValue"]); (CommandType.Text, "Select", cmdTextScriptSelect, ["MainName"]); (CommandType.Text, "Delete", cmdTextScriptDelete, ["MainName"]) (CommandType.StoredProcedure, "Insert", cmdTextProcedureInsert, ["MainName"; "SubName"; "MainValue"; "SubValue"]); (CommandType.StoredProcedure, "Update", cmdTextProcedureUpdate, ["MainName"; "MainValue"; "SubValue"]); (CommandType.StoredProcedure, "Select", cmdTextProcedureSelect, ["MainName"]); (CommandType.StoredProcedure, "Delete", cmdTextProcedureDelete, ["MainName"])]; lst |> List.iter runTest; finally cnn.Close(); And I'm getting the following results: Test 'Script -Insert' - total: 00:00:00.0292841; per call: 2ms Test 'Script -Update' - total: 00:00:00.0056296; per call: 0ms Test 'Script -Select' - total: 00:00:00.0051738; per call: 0ms Test 'Script -Delete' - total: 00:00:00.0059258; per call: 0ms Test 'Procedure-Insert' - total: 00:00:01.2567146; per call: 125ms Test 'Procedure-Update' - total: 00:00:00.7442440; per call: 74ms Test 'Procedure-Select' - total: 00:00:00.5120446; per call: 51ms Test 'Procedure-Delete' - total: 00:00:01.0619165; per call: 106ms The situation with the remote server is much better, but still a great gap between plaqin queries and stored procedures: Test 'Script -Insert' - total: 00:00:00.0709299; per call: 7ms Test 'Script -Update' - total: 00:00:00.0161777; per call: 1ms Test 'Script -Select' - total: 00:00:00.0258113; per call: 2ms Test 'Script -Delete' - total: 00:00:00.0166242; per call: 1ms Test 'Procedure-Insert' - total: 00:00:00.5116138; per call: 51ms Test 'Procedure-Update' - total: 00:00:00.3802251; per call: 38ms Test 'Procedure-Select' - total: 00:00:00.1241245; per call: 12ms Test 'Procedure-Delete' - total: 00:00:00.4336334; per call: 43ms Is it any chance to improve the SP performance? Please advice. ADO.NET driver version - 9.10.2.9 Server version - 9.10.0.9 (ANSI - GERMAN, OEM - GERMAN) Thanks!

    Read the article

< Previous Page | 1500 1501 1502 1503 1504 1505 1506 1507  | Next Page >