Search Results

Search found 8190 results on 328 pages for 'switch'.

Page 151/328 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• Connect devices plugged into Raspberry Pi ethernet to WiFi network

  - by Tom

  I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

  Read the article

• trying to connect to non-standard port over esxi guest network

  - by user52874

  I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

  Read the article

• How do you confirm network adapter is gigabit capable?

  - by StrandedPirate

  Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• Remote Desktop with resource sharing

  - by Malfist

  I recently removed ubuntu from my laptop and installed Windows 7 because Microsoft's DreamSpark program gave me Visual Studio Pro for free and I want to do some C# programming with it. The problem is that my laptop's screen is small, it's resources are extremely limited, and it doesn't have a full sized keyboard. However, I do have a desktop that is my primary system, and it's got a quadcore and tons of RAM in it, and dual monitors. My question is this, is there a way I can use a program from my laptop, on my desktop, and share my desktops CPU and RAM with the laptop? Everything is connected through a 100 MB/s switch. One caveat, my desktop is running ubuntu.

  Read the article

• Problems using PC as a media server with PS3

  - by Tiger

  I recently got a PS3 and decided to take advantage of the fact that it can be used to stream movies by making my PC a media server. I've done this in the past with the same router I have now before I sold my old PS3, but not on this PC. I've tried using both Tversity and PS3 Media server, but I don't think the problem lies within the configuration of either of those programs because I am unable to ping the PS3. This problem only occurs when I am using a wired connection on my pc, attempting to connect to a WLAN connection on the PS3. If I switch to WLAN on my PC I can successfully ping the PS3 and connect to the media server. Thanks

  Read the article

• Is it possible to set a SRV record with xname.org

  - by Emilien

  According to XName's (not up-to-date) ChangeLog Thu Oct 19 2006 Yann Hirou ([email protected]) Adding SRV records - including modification of dns_records it appears to be possible to set a SRV record for one of your zones. However, I just can't find a way to do this in the UI. I've contacted Yann Hirou, but didn't receive any answer (he is either submerged by emails, or only responds to "paying supporters") It might be that the feature is available in the source code, but that the instance running on XName has not been updated (since 2006?) Has anyone using XName been able to set up such records? Otherwise I might be forced to switch to another free DNS service...

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• Compaq Presario CQ40 unexpected turn off

  - by CRoshanLG

  My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

  Read the article

• seeking to upgrade my bash magic. help decipher this command: bash -s stable

  - by tim

  ok so i'm working through a tutorial to get rvm installed on my mac. the bash command to get rvm via curl is curl -L https://get.rvm.io | bash -s stable i understand the first half's curl command at location rvm.io, and that the result is piped to the subsequent bash command, but i'm not sure what that command is doing. My questions: -s : im always confused about how to refer to these. what type of thing is this: a command line argument? a switch? something else? -s : what is it doing? i have googled for about half an hour but not sure how to refer to it makes it difficult. stable : what is this? tl;dr : help me decipher the command bash -s stable to those answering this post, i aspire to one day be as bash literate as you. until then, opstards such as myself thank you for the help!

  Read the article

• Cannot Access a Shared Folder Using Windows 2008

  - by peter

  Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Why DELL PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

  - by Kedare

  Hello ! I have a little question, I'm actually studing IT in France, and when looking on alternative on the very [...] very expensive Cisco equipments, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipments in France :( Thank you !

  Read the article

• hardware for pushing buttons

  - by Elazar Leibovich

  Many times I want my computer to interface old hardware. Such as radio, light switch, etc. This mostly involves pushing pressing and moving various buttons and switches. I don't want to buy new hardware I want my computer to interface the old hardware I already have. I thought about it and reached to the conclusion that what I need is a general purpose button-pusher hardware. I need a simple device I can interface by a computer and would be able to push most of the buttons we have in daily accessories, without damaging the button. Is there any such accessory availible?

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  Hi I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks Thanks, Chris

  Read the article

• Integrated video card not detected after installing new video card

  - by Jaime

  Hi, I got this emachines ET1331G-03W with a built in integrated video card (GeForce 6150SE). I added another video card (e-GeForece 6200 LE) in the hopes that I utilize both and have a dual monitor. But once the additional card was installed, windows 7 does not recognize the integrated video. Is it possible to use both video cards and have a dual monitor setup? Is there a switch on the motherboard that I have to turn on or off to enable the integrated video card along with the new card. Thanks!

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• MRTG + RRDTool Hourly Graph

  - by SuperMicro321

  I am using MRTG + RRDtool to monitor the bandwidth on each switchport of a Cisco Catalyst 2950 via snmp. Is MRTG capable of generating an hourly graph? With RRDtool I was able to set the interval to 1 minute in hopes of getting a more detailed graph, but the shortest timeframe the graph is 'Daily' graph (5 Minute Average) and the image is too small. What I am looking to get out of this: I am looking to be able to visually monitor all of the switch ports and tell when port begins to have unusually high traffic, in real time (1 minute interval of snmp poll, graphs generated, and page refreshed).

  Read the article

• Removing Exchange 2010 and SBS2011 gracefully after migration to Server 2008 Std R2

  - by user145275

  We have recently completed a server replacement for a customer. They had SBS2011 using Exchange 2010. They now have Server 2008 Std R2 and Google Apps email. We have migrated the DHCP, DNS, Filserver and all 5 FSMO roles to the new 2008 R2 server (today). During the grace period for SBS2011 we intend to decomission the old server completely. Previous experience would suggest uninstalling Exchange 2010 then demote SBS2011 then remove from the domain and switch off. Can I simply demote SBS2011 without removing Exchange? Can't really find any walkthroughs on this. My concern is that if we simply turn off SBS2011 the AD is left in a mess with legacy Exchange objects making any potential reintroduction of Exchange difficult in future, plus I want to do it the right way!

  Read the article

• Citrix ICA Client on Mac shift key doesn't work as expected.

  - by brianegge

  When I'm connected to a Windows XP computer from my Mac OS X 10.6 using the Citrix ICA Client, it seems that the shift key only works for the first letter typed after pressing shift. In order to type multiple uppercase letters, like ICA, I must either press caps lock, or press and release shift before each character. I've tried switching between standard and enhanced keyboard, as well as the 'Send Special Keys Unchanged' option, but none of these seem to affect the issue. The problem doesn't occur when I switch from the Citrix window to a regular Mac window.

  Read the article

• Changing Recovery Model in Replicated Database

  - by Rob

  I now am the proud owner of two servers that replicate with each other. I had nothing to do with the install, but (of course), now i have to support the databases. Both databases are in the Simple recovery model, but the users want to ensure as little data loss as possible so I'm thinking that I should change the recovery model over to full and start doing transaction log backups. I wasn't planning on backing up the subscribing database, only the publisher. Is this the right plan? Do I need to switch both the Subscriber and and the publisher to Full, or can I leave the subscriber in Simple, but have the Publisher in Full? When I change the recovery model in one (or both) do the databases need to be offline? Thanks

  Read the article

• Using a buffalo wl12-pci-g54s on Debian Linux

  - by Nic Hubbard

  I have a buffalo wl12-pci-g54s wireless card that I want to install in my PC running Debian. I need this so I can move the server to a better location in another room. So, is there an easy way to do this? Some package that I can install and get up and running? Other instructions that I found online have been confusing. I am also using a static IP, so I need to retain that when I make the switch. Thanks!

  Read the article

• Thunderbird message pane

  - by MarkS

  I have just switched from Outlook to Thunderbird and one feature that I am missing is when I would click a folder it would open a message in the message pane automatically. Now it is always blank. I have it set to remember the last one opened so if I switch back and forth it is there. But if I just click a folder the first time that I invoke it -- the message pane is blank. Is there a setting somewhere that I can change. This is Thunderbird 3.0 Thanks Mark

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >