Search Results

Search found 12017 results on 481 pages for 'root'.

Page 152/481 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

• Second network card configuration not working.

  - by Sebas

  I have 4 servers running Centos 5. All of them have two ethernet network cards. I have configured 192.168.1.x IP addresses on their eth0 card. They are all connected to the same switch using their eth0 card and they are all working. I have configured 10.72.11.x IP addresses on their eth1 card.They are all connected to the same switch - a different one from the switch used with eth0 card - using their eth1 card and they are NOT all working. Their configuration files is like: DEVICE=eth1 BOOTPROTO=static IPADDR=10.72.11.236 BROADCAST=10.72.11.191 NETMASK=255.255.255.192 NETWORK=10.72.11.128 HWADDR=84:2B:2B:55:4B:98 IPV6INIT=yes IPV6_AUTOCONF=yes ONBOOT=yes The interfase is starting and configured as I need. [root@sql1 network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:97 inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::862b:2bff:fe55:4b97/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2981 errors:0 dropped:0 overruns:0 frame:0 TX packets:319 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:386809 (377.7 KiB) TX bytes:66134 (64.5 KiB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:98 inet addr:10.72.11.236 Bcast:10.72.11.191 Mask:255.255.255.192 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:48 Memory:dc000000-dc012800 I also added a route-eth1 file that looks like: 10.0.0.0/8 via 10.72.11.254 Routing looks fine to me: [root@sql1 network-scripts]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.72.11.192 0.0.0.0 255.255.255.192 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.72.11.254 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 But I cannot ping one server from the other. [root@sql1 network-scripts]# ping 10.72.11.235 PING 10.72.11.235 (10.72.11.235) 56(84) bytes of data. From 10.72.11.236 icmp_seq=1 Destination Host Unreachable From 10.72.11.236 icmp_seq=2 Destination Host Unreachable From 10.72.11.236 icmp_seq=3 Destination Host Unreachable From 10.72.11.236 icmp_seq=4 Destination Host Unreachable From 10.72.11.236 icmp_seq=5 Destination Host Unreachable From 10.72.11.236 icmp_seq=6 Destination Host Unreachable ^C --- 10.72.11.235 ping statistics --- 7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6033ms , pipe 3 What am I doing wrong?

  Read the article

• puppet restart service failure

  - by Roman

  help me please with service restart # changing iptables` file { "/etc/sysconfig/iptables": ensure => "present", content => template("all_in_one/iptables.erb"), owner => root, group => root, mode => 600, } service { "iptables": ensure => running, enable => true, hasstatus => true, hasrestart => true, subscribe => File["/etc/sysconfig/iptables"] } output is: err Failed to call refresh: Could not restart Service[iptables]: Execution of '/sbin/service iptables restart' returned 1

  Read the article

• User reduced LVM logical volume without resizing filesystem

  - by Matthew

  I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

  Read the article

• OpenVPN Permission Denied Error

  - by LordCover

  I am setting OpenVPN up, and I'm in the state of adding users. Details: Host System: Windows Server 2003 32-bit. Guest System: Ubuntu Linux (with OpenVPN installed already), actually I downloaded it from OpenVPN.Net. Virtualization: VMWare v7.0 Problem: I can access the Access Server web portal (on the port 5480), but when I login to http://host_ip:943/admin and enter my (correct) login info, it shows me a page saying that "You don't have enough permissions". I am the (root) user!!!! that is really weird!!! Note: if I enter wrong login it will denote an incorrect login, this means that I am logging in successfully but the problem comes after the login process. What I tried: I tried to create another user after (root) logging in to Linux Bash using (useradd) command, but the same resulted.

  Read the article

• ssl_error_log apache issue

  - by lakshmipathi

  https://localhost works but https://ipaddress didn't cat logs/ssl_error_log [Mon Aug 02 19:04:11 2010] [error] [client 192.168.1.158] (13)Permission denied: access to /ajaxterm denied [root@space httpd]# cat logs/ssl_access_log 192.168.1.158 - - [02/Aug/2010:19:04:11 +0530] "GET /ajaxterm HTTP/1.1" 403 290 [root@space httpd]# cat logs/ssl_request_log [02/Aug/2010:19:04:11 +0530] 192.168.1.158 SSLv3 DHE-RSA-CAMELLIA256-SHA "GET /ajaxterm HTTP/1.1" 290 httpd.conf file NameVirtualHost *:443 <VirtualHost *:443> ServerName localhost SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <Directory /usr/share/ajaxterm > Options FollowSymLinks AllowOverride None Order deny,allow Allow from All </Directory> DocumentRoot /usr/share/ajaxterm DirectoryIndex ajaxterm.html ProxyRequests Off <Proxy *> # Order deny,allow Allow from all </Proxy> ProxyPass /ajaxterm/ http://localhost:8022/ ProxyPassReverse /ajaxterm/ http://localhost:8022/ ErrorLog error_log.log TransferLog access_log.log </VirtualHost> How to fix this ?

  Read the article

• Set nginx.conf to deny all connections except to certain files or directories

  - by Ben

  I am trying to set up Nginx so that all connections to my numeric ip are denied, with the exception of a few arbitrary directories and files. So if someone goes to my IP, they are allowed to access the index.php file, and the phpmyadmin directory for example, but should they try to access any other directories, they will be denied. This is my server block from nginx.conf: server { listen 80; server_name localhost; location / { root html; index index.html index.htm index.php; } location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/http/nginx/$fastcgi_script_name; include fastcgi_params; } } How would I proceed? Thanks very much!

  Read the article

• Virtual hosting all resolving to the same files

  - by nona urbiz

  I'm trying to set up virtual hosts on my VPS (centos). I set both domain nameservers to fns1.dnspark.net and fns2.dnspark.net and set an A record there for each domain pointing to my IP address 50.16.219.8. Both domains are currently resolving to the first virtual host. What am I doing wrong? Thanks! NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/root/dylanstestserver.com ServerName dylanstestserver.com ServerAlias www.dylanstestserver.com ErrorLog logs/dylanstestserver.com-error-log CustomLog logs/dylanstestserver.com-access_log common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/root/repthis.info ServerName repthis.info ServerAlias www.repthis.info ErrorLog logs/repthis.info-error-log CustomLog logs/repthis.info-access_log common </VirtualHost>

  Read the article

• Panic Transmit file upload

  - by 1ndivisible

  I've ditched Coda and bought Transmit. I'm a little confused by the file uploading. I have exactly the same folder structure remotely and locally, but if I right-click a file and choose Upload "SomeFileName.html" The file is always uploaded into the root of the remote site, even if the file is in a folder. If I choose to upload a file at assets/images/some_image.png I would expect it to be uploaded to the same folder on the remote server, not the root. Coda dealt with this perfectly and also told me what files had been modified and needed uploading. Transmit doesn't seem to do either of these things. So my questions are: How can I upload a file to the same path on the remote server without having to drag and drop Is there any way to have Transmit mark edited files or upload only edited files. [There is no tag for Transmit so if someone with more rep could make and add one that would be grand]

  Read the article

• Windows Advanced Firewall certificate based IPSEC

  - by Tim Brigham

  I'm working on migrating from using IPSEC settings stored under the 'IP Security Policies on Active Directory' to using the 'Windows Firewall with Advanced Security' for my 2008+ boxes. I have successfully been able to get this set up using Kerberos authentication, however my openswan implementation on my Linux boxes is using certificates. Whenever I try changing the authentication method to computer certificate (using RSA and my root CA) the connection is bombing out. I've made this change at both a connection request policy and on the IPSEC settings on the root Windows Firewall with Advanced Security node. The windows event log shows the authentication request is taking place but failing negotiating a mode. What am I missing here?

  Read the article

• kloxo setup error

  - by ron

  Hi, i've just purchased vps from 2host, its unmanaged. the support told me to install kloxo. However i got the ff errors in step 1: --begin-- root@vpshostingtips:~# wget http:// download.lxlabs . com/download/kloxo/production/kloxo-install-master.sh --2010-05-06 04:17:04-- http:// download.lxlabs . com/download/kloxo/production/kloxo-inst all-master.sh Resolving download.lxlabs.com... failed: Temporary failure in name resolution. wget: unable to resolve host address `download.lxlabs.com' root@vpshostingtips:~# --end-- Note: i split the hyperlinks intentionally to post here can somebody tell me whats the reason for error? sorry so new to vps.

  Read the article

• winrar command line folder stucture

  - by Lee Hull

  I am trying to zip up a folder.. Example: C:\Test*.* C:\Test\bin*.* I want to be able to zip up the Test folder with bin subfolder, however, I need the Test folder contents in the zip root. I am trying to do this using the WinRar command line (rar.exe) I've tried using rar.exe a "C:\File.zip" -ep "C:\Test" but it puts all the folder contents in root... Tried rar.exe a "C:\File.zip" -ep "C:\Test*.*" "C:\Test\bin" same thing.. any ideas?

  Read the article

• force unattended install php apt debian squeeze

  - by user1258619

  i am trying to do an unattended install via php for several packages but every time when the dependencies come up it aborts instead of forcing the answer to be yes. (i have broken apt a few times...) each time though i start off re-imaging my vps(testing server) so there isn't an issue of something still being hung or crashed.can someone tell me what i am doing wrong? keep in mind this is the 12th version of this script to get nowhere. fwrite(STDOUT, "Root Password:\n"); $root_pass = chop(fgets(STDIN)); $file_apt = '/etc/apt/apt.conf.d/70debconf'; // Open the file to get existing content $current_apt = file_get_contents($file_apt); // Append a new person to the file $current_apt .= "Dpkg::Options {\"--force-confold\";};\n"; // Write the contents back to the file file_put_contents($file_apt, $current_apt); $update = shell_exec('echo '.$root_pass.' | DEBIAN_FRONTEND=noninteractive sudo -S apt-get update'); echo $update; $update_upgrade = shell_exec('echo '.$root_pass.' | DEBIAN_FRONTEND=noninteractive sudo -s apt-get upgrade'); echo $update_upgrade; $install_unattended_mysql = shell_exec('echo '.$root_pass.' | DEBIAN_FRONTEND=noninteractive apt-get install --yes --force-yes mysql-server'); echo $install_unattended_mysql; $install_mysql_set_password = shell_exec('mysql -u root -e "UPDATE mysql.user SET password=PASSWORD("'.$root_pass.'") WHERE user="root"; FLUSH PRIVILEGES;'); echo $install_mysql_set_password; i have read a few places that i needed to edit the apt.conf file so i am doing so here and doing an update and an upgrade. also the upgrade does abort when it actually has to install something. The following packages will be upgraded: apache2 apache2-doc apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common base-files bind9 bind9-host bind9utils debian-archive-keyring dpkg dselect libbind9-60 libc-bin libc6 libdns69 libisc62 libisccc60 libisccfg62 liblwres60 locales 22 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 18.4 MB of archives. After this operation, 8192 B of additional disk space will be used. Do you want to continue [Y/n]? Abort. I also should note that only a few pieces of software are going to be installed from the apt repo's as i will include some binaries to go along with it.

  Read the article

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Major permission repair needed on Mac Os

  - by Luke1111

  I made the fatal error of copying and pasting a sudo command into my terminal without double checking it, here it is. sudo -R mysql / What this does (for those that don't know) is recursively change the owner every file from the root down to mysql!! obviously not what i was intending This has of course played havoc with my system, the first thing i did was the apple permission repair but that only works for files that it has an idea of though it has changed a lot of file ownerships back to root. It seems that many library files are still owned incorrectly, as a lot of problems don't work. What i propose doing as a temporary fix until i can reinstall mountain lion is to recursively set all ownerships that are mysql to Luke. I'm not sure what they should precisely but this is still better than nothing. Is this possible using a shell script? I realise that this won't fix the problem properly and i will have to reformat but i need the machine in a workable state just for this week.

  Read the article

• Attempting to caue packet loss with netem doesn't work - possibly because of NAT (but delay does work)

  - by tomdee

  I have traffic from a WIFI access point routed via an Ubuntu box. I have two network interfaces which are NATed *filter :INPUT ACCEPT [11:690] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [37:6224] -A FORWARD -s 192.168.2.0/24 -i eth1 -o eth0 -m conntrack --ctstate NEW -j ACCEPT -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Mar 15 13:37:21 2012 # Generated by iptables-save v1.4.10 on Thu Mar 15 13:37:21 2012 *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -j MASQUERADE COMMIT If I run a ping app on an Android device connected to the WIFI network I can happily ping google. If I use netem to introduce some delay tc qdisc change dev eth0 root netem delay 100ms I can clearly see pings taking longer. If I use netem to introduce some packet loss tc qdisc change dev ifb0 root netem loss 50% then I see no change. Packet loss does work fine for locally generated traffic, just not for traffic coming in over the network that's being NATed. Any ideas how to sort this out?

  Read the article

• Clone MySQL DB - errors with CREATE VIEW/SHOW VIEW privileges

  - by user43537

  Running MySQL 5.0.32 on Debian 4.0 (Etch). I'm trying to clone a WordPress MySQL database completely (structure and data) on the same server. I tried a dump to an .sql file and an import into a new empty database from the command line, but the import fails with errors saying the user does not have the "SHOW VIEW" or "CREATE VIEW" privilege. Trying it with PHPMyAdmin doesn't work either. I also tried doing this with the MySQL root user (not named "root" though) and it shows an "Access Denied" error. I'm terribly confused as to where the problem is. Any pointers on cloning a MySQL DB and granting all privileges to a user account would be great (specifically for MySQL 5.0.32). Thanks!

  Read the article

• dovecot rhel 5 installation fails because of newer libraries

  - by kayhan yüksel

  to whom it may respond to, we are trying to install dovecot (dovecot-2.2.10-1_14.el5.x86_64) on a RHEL 5.4 server and we get the error : [root@asgfkm /]# rpm -i dovecot-2.1.17-0_136.el5.x86_64.rpm uyarý: dovecot-2.1.17-0_136.el5.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID 66534c2b: NOKEY hata: Failed dependencies: libcrypto.so.6()(64bit) is needed by dovecot-1:2.1.17-0_136.el5.x86_64 libldap-2.3.so.0()(64bit) is needed by dovecot-1:2.1.17-0_136.el5.x86_64 libmysqlclient.so.15()(64bit) is needed by dovecot-1:2.1.17-0_136.el5.x86_64 libmysqlclient.so.15(libmysqlclient_15)(64bit) is needed by dovecot-1:2.1.17-0_136.el5.x86_64 libssl.so.6()(64bit) is needed by dovecot-1:2.1.17-0_136.el5.x86_64 [root@asgfkm /]# but when we try to install requested libraries, it conflicts with the never libraries : uyarý: openssl-0.9.8e-27.el5_10.1.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID e8562897: NOKEY openssl-1.0.0-20.el6.x86_64 paketi zaten yüklü (openssl-0.9.8e-27.el5_10.1.x86_64 sürümünden daha yeni) this is happening with the other libraries also : libldap, libmysql, etc... Do you recommend --force option to install it or is there any other proper way around ? Thank you for your time,

  Read the article

• OpenVPN useradd error

  - by zfz

  I tried to install an OpenVPN access server in Centos 6 on a linode VPS. The installation is okay for my ubuntu 11.10 distro in another VPS. The installation error occours when adding the user "openvpn" in Centos. The error message is "useradd: canot open /etc/passwd" The detail of My "/etc/passwd" file: "-rw-r--r-- 1 root root 1194 Oct 9 00:33 /etc/passwd" I am not quite familiar with Centos, so how can I add the user "openvpn" in order to setup the VPN service? Thanks.

  Read the article

• linux migration/N high cpu consumption

  - by Alexander

  on my linux appliance based on 3.0.0-14 kernel I got: RPN:/tmp# ps axuf | grep migration root 6 92.9 0.0 0 0 ? S Apr23 2788:33 \_ [migration/0] root 7 99.7 0.0 0 0 ? S Apr23 2993:20 \_ [migration/1] my top is RPN:/tmp# top -b -n1 top - 12:03:41 up 2 days, 2:18, 5 users, load average: 25.76, 25.26, 24.73 Tasks: 171 total, 1 running, 168 sleeping, 0 stopped, 2 zombie Cpu(s): 14.0%us, 12.6%sy, 0.8%ni, 72.0%id, 0.3%wa, 0.0%hi, 0.3%si, 0.0%st Mem: 1543032k total, 1264728k used, 278304k free, 25308k buffers Swap: 0k total, 0k used, 0k free, 183168k cached My question: why processes "migration/N" take so much CPU?

  Read the article

• Installed Percona mySQL on CPanel but getting an error

  - by user1227914

  I installed Percona mySQL on my fresh CPanel server (no databases yet) according to: http://www.ecommy.com/linux/install-...el-environment Everything seemed to be OK and the server also starts fine, except some commands return this error: root@server [/var/lib/mysql]# mysql -A -sN information_schema -e "select * from user_statistics;" mysql: unknown variable 'innodb_file_per_table=1' root@server [/var/lib/mysql]# mysql -A mysql: unknown variable 'innodb_file_per_table=1' In my /etc/my.cnf I have: [mysql] innodb_file_per_table=1 userstat_running=1 I am planning on using InnoDB for the databases. Anyone know what the problem is? Or even better, how to fix it? I have installed Percona 5.5 with yum on CentOS.

  Read the article

• Nginx Reverse Proxy Node.js and Wordpress + Static Files Issue

  - by joemccann

  I have had quite a time trying to get nginx to serve static assets from my wordpress blog. Have a look at the config and let me know if you can help. ( https://gist.github.com/1130332 - to see the entire thing) server { listen 80; server_name subprint.com; access_log /var/www/subprint/logs/access.log; error_log /var/www/subprint/logs/error.log; root /var/www/subprint/server/public; # express serves static resources for subprint.com out of here location / { proxy_pass http://127.0.0.1:8124; root /var/www/subprint/server; access_log on; } #serve static assets location ~* ^(?!\/).+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$ { expires max; access_log off; } # the route for the wordpress blog # unfortunately the static assets (css, img, etc.) are not being pathed/served properly location /blog { root /var/www/localhost/public; index index.php; access_log /var/www/localhost/logs/access.log; error_log /var/www/localhost/logs/error.log; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } if (!-f $request_filename) { rewrite /blog$ /blog/index.php last; break; } } # actually serves the wordpress and subsequently phpmyadmin location ~* (?!\/blog).+\.php$ { fastcgi_pass localhost:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/localhost/public$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } # This works fine, but ONLY with a symlink inside the /var/www/localhost/public directory pointing to /usr/share/phpmyadmin location /phpmyadmin { index index.php; access_log /var/www/phpmyadmin/logs/access.log; error_log /var/www/phpmyadmin/logs/error.log; alias /usr/share/phpmyadmin/; if (!-f $request_filename) { rewrite /phpmyadmin$ /phpmyadmin/index.php permanent; break; } } # opt-in to the future add_header "X-UA-Compatible" "IE=Edge,chrome=1"; }

  Read the article

• Reshape linux md raid5 that is already being reshaped?

  - by smammy

  I just converted my RAID1 array to a RAID5 array and added a third disk to it. I'd like to add a fourth disk without waiting fourteen hours for the first reshape to complete. I just did this: mdadm /dev/md0 --add /dev/sdf1 mdadm --grow /dev/md0 --raid-devices=3 --backup-file=/root/md0_n3.bak The entry in /proc/mdstat looks like this: md0 : active raid5 sdf1[2] sda1[0] sdb1[1] 976759936 blocks super 0.91 level 5, 64k chunk, algorithm 2 [3/3] [UUU] [>....................] reshape = 1.8% (18162944/976759936) finish=834.3min speed=19132K/sec Now I'd like to do this: mdadm /dev/md0 --add /dev/sdd1 mdadm --grow /dev/md0 --raid-devices=4 --backup-file=/root/md8_n4.bak Is this safe, or do I have to wait for the first reshape operation to complete? P.S.: I know I should have added both disks first, and then reshaped from 2 to 4 devices, but it's a little late for that.

  Read the article

• Apache Configuration Issue - website without www going to default site

  - by Brian

  I have included a copy of my virtual host file for apache below. (However I have hidden the ip address and domain name for now) My problem is that the following work: www.mydomainnamehere.org www.mydomainnamehere.com mydomainnamehere.com This one doesn't work: mydomainnamehere.org - instead of going to the document root listed below, it goes to the document root of the default site. What could be causing this? <VirtualHost [ipaddresshidden]:80> ServerAdmin [email protected] ServerName mydomainnamehere.org ServerAlias www.mydomainnamehere.org ServerAlias mydomainnamehere.com ServerAlias www.mydomainnamehere.com DocumentRoot /home/www/mydomainnamehere.org/html/ ErrorLog /home/www/mydomainnamehere.org/logs/error.log CustomLog /home/www/mydomainnamehere.org/logs/access.log combined </VirtualHost>

  Read the article

• Scanning php uploads in tmp directory with clamdscan fails

  - by Nikola

  I can't seem to get this thing to work, some permission problem maybe, but i can't even run clamdscan normally form console with root the result is always Permission denied. for example i create a file test.txt (eicar file) in /tmp and execute "clandscan /tmp/test.txt" in console logged in as root and i get "/tmp/test.txt: Access denied. ERROR ". The clamd demon is running with user clamav could that be the reason? Now i want to scan the same file (/tmp/test.txt) via php , so i run (i have chowned the file to apache:apache ) $cmd="clamdscan /tmp/test.txt"; exec($cmd,$a,$b); i get error 127 i try with the full path of the command /usr/bin/clamdscan i get error 126 (command is found but is not executable), this means that apache doesn't have the permission to execute /usr/bin/clamdscan ? what could be the problem?

  Read the article

• firefox, opera 'The connection was reset' on few POST method calls on Windows and Ubuntu

  - by Gopalakrishnan Subramani

  my website works well with GET method, also few POST methods. Some pages with POST method doesn't work. Some pages with POST work. For example, login page uses POST that works fine. When I post the data on webpage, firefox says "Connecting..." and finally report connection timed out error. The same behavior happens with Opera as well. However Google Chrome works fine. At the server side, I use nginx 1.2.4 with HTTPS and uwsgi for python (flask framework) app. I use geotrust certificate. The same behavior happens with Windows 7 and Ubuntu 12.04 on firefox. I tried firefox in safemode, but no luck. Set auto-detect proxy settings. no luck. Cleared all cookies. no luck Anyone help me to fix this issue? I am posting ngix config. shame on me. I use root, I know which is not advised. need to fix soon. user root; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 80; server_name www.example.com; rewrite ^(.*) https://example.com$1 permanent; } server { listen 80; server_name example.com; rewrite ^ https://$server_name$request_uri? permanent; } server { listen 443; server_name example.com; keepalive_timeout 70; ssl on; ssl_certificate /root/cc.cert; ssl_certificate_key /root/cc.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers HIGH:!aNULL:!MD5; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/tmp/uwsgi.sock; } } } #mail { # # See sample authentication script at: # # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript # # # auth_http localhost/auth.php; # # pop3_capabilities "TOP" "USER"; # # imap_capabilities "IMAP4rev1" "UIDPLUS"; # # server { # listen localhost:110; # protocol pop3; # proxy on; # } # # server { # listen localhost:143; # protocol imap; # proxy on; # } #}

  Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >