Search Results

Search found 20225 results on 809 pages for 'computer parts'.

Page 153/809 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Install Ubuntu in UEFI mode (unable to boot from USB)

  - by Adele

  I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

  Read the article

• Too big a difference between Loud and Quiet when watching DVD's... constantly have to adjust volume.

  - by Dan

  It is hard for me to find the right volume for my computer to watch my dvd's on because it seems like most reasonable volumes become overwhelming at the loudest parts of a movie and it is hard to even make out the dialog at the quietest parts. I find I'm constantly adjusting the volume during the course of a movie. Are there ways to make the difference between the louds and the quiets not so extreme? (both computer related solutions and non-computer related solutions welcome). Like moving my speakers across the room and increasing the volume? or the opposite? Or would would the extremes be less noticeable if I used headphones? Are there movie players that might have more complex sound adjustment features? If there is a software solution out there for linux that would be great too. Thanks, Dan

  Read the article

• Adding files and folders to a Root Folder (inode/directory)

  - by xBaldwin

  Ok so I'm fairly new to Ubuntu and wasn't even the one who put it one this computer(my friend did while I was storing it at his house because I was in the middle of transitioning between houses), but It's on here so I need to learn what I can so I can use it more effectively. My question at the moment is "Would it be safe to add files/folders to a folder (inode/directory) that requires Root access?" I continue to be informed by the system that the directory I am using is running low on space which I found odd seeing how I should have a lot more room on this computer. That's when I started looking at the directories and found that there are two with a bunch of un-used space on them. One says it has 46.9 GB of free space and the other has 24.9 GB of free space. Seems like a complete waste to not use that space and yet they both say they require Root access to add to them. I know that Root folders and files are normally all system folders and files. I also know that changing or deleting them can mess up the computer which right now I cant afford to do. I just don't know if it would mess anything up to add something to those folders. Thank you in advance to anyone who takes the time to reply and try to teach me about how all that works. I really do appreciate it and will do the same if by some crazy (completely unlikely) reason I have an answer to your question. :-)`

  Read the article

• Testing a Virtualisation of a Debian Server (vmWare vSphere probably)

  - by xyza

  I'm soon getting access to a powerful root-server (quad-core, 16gb ram, 1gbit connection) where gameservers (like minecraft,counterstrike etc.) for different customers should be setup. My plan is to use programs such as vmWare vSphere to create some virtual machines for each customer. Inside such a virtual machine I'll setup the gameserver and maybe some kind of ftp server when its needed. Now that I'm kinda new to virtualisation of servers I want to test this local on my Desktop Computer. Is it possible to create a virtual machine of debian using vmWare Player on my Windows desktop computer and then install vmware vSphere in this VM to create multiple VM's inside that VM ? Or do I really need to install Debian on my desktop computer. (I want to use the time during installations etc. to work a bit at my windows installation) Some tips on virtualising debian servers are also appreciated :)

  Read the article

• How to make OS X send LOCAL IP address in www request headers?

  - by Louis W

  I need to be able to send the local IP address of a computer along with the headers when making requests to a website. Similar to the way you can get the _SERVER["REMOTE_ADDR"] in php, but the local ip (e.g. 192.168.100.1) This will be an intranet so the environment can be controlled. Anything can be installed on the computer, etc. This will be on a Mac OS X computer. Hoping for both Safari AND Firefox. But would be open to using one one. Does anyone know if this is possible? Thanks so much.

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• WinXP on VPC - Unable to change the way users log on or off

  - by kamleshrao

  On my Win7 computer, I have setup a new Win-XP VPC. In the VPC window, when I click Ctrl+Alt+Del, it shows me Windows Task Manager. As per MS KB [ http://support.microsoft.com/kb/281980 ], we can change this behavior to show the regular Windows Security window. But while making this change, I am getting the following error: User Accounts Fast User Switching cannot be turned off from a remote connection to this computer. Log on to the computer locally to turn off Fast User Switching. OK Is there any way I can fix this setting?

  Read the article

• How do I find the source of soft page faults?

  - by David Robison

  I have Windows 7 x64 computer that according to Performance Monitor has 70,000 page faults / second when idling. That's seems like a lot to me (every other computer I check has basically 0 page faults / second when idling). If I use Resource Monitor or Process Explorer to check hard faults, I see that they are basically 0. So all the page faults are soft. Normally, soft page faults are not a problem, but I suspect they might be causing issues for this computer given there are so many. I would like to identify what programs are causing the soft faults. Are there any tools that exist the display the number of soft page faults for each process?

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• ubuntu to ubuntu backup in internal network

  - by amirash

  hey, i got my development "home" server witch is ubuntu 10, i brought today a computer in order to make a backup to this computer (the development server does also to him self backups every day but im paranoaid so i want to have two backups just in case on diffrent computers) what is the best way to backup the system core of the development server (like norton ghost) & do a full & incrmnt backup of him to the new computer that ive brought? rsync? rdiff? scp? clonezilla?

  Read the article

• Have Windows Automatically Login Without Entering Your Password

  - by deadlydog

  If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

  Read the article

• One vs. many domain user accounts in a server farm

  - by mjustin

  We are in a migration process of a group of related computers (Intranet servers, SQL, application servers of one application) to a new domain. In the past we used one domain user account for every computer (web1, web2, appserver1, appserver2, sql1, sqlbackup ...) to access central Windows resources like network shares. Every computer also has a local user account with the same name. I am not sure if this is necessary, or if it would be easier to configure and maintain to use one domain user account. Are there key advantages / disadvantages of having one single user account vs. dedicated accounts per computer for this group of background servers? If I am not wrong, one advantage besides easier administration of the user account could be that moving installed applications and services around between the computers does not require a check of the access rights anymore. (Except where IP addresses or ports are used)

  Read the article

• X200 Tablet notebook won't start after BIOS Update

  - by THEn

  I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

  Read the article

• Remote Install Mac OS X from Windows not on LAN?

  - by Frost Shadow

  I want to install applications from my Mac OS X install disc, or be able to archive-install from it, but it's back at my house outside my current LAN. Is there a way I can remotely access my OS X install disc on my home Windows XP computer from my Snow Leopard? In my help manual it says I can do remote installs, or use another computer's disc drive remotely, but it has to be with another computer on the LAN. Is there a way to combine my mac's LAN and my windows' LAN? I think it has something to do with making a VPN; is there a way to do that which will work between Snow Leopard and XP, doesn't require additional hardware, and is preferably free? Thanks a lot!

  Read the article

• Backing up a Linux VPS with RSync to Vista

  - by Frank

  I've been working to setup a Linux VPS to host a couple of Wordpress sites and eventually a Mercurial server. I've setup one site and things have gone well. However, before I start moving other things to the VPS, I need to setup a backup solution. My provider, Linode, suggest RSync (among a couple of other options) to do backups. I've seen a few posts on this site that suggests other backup solutions including going to the Amazon Cloud but that costs money and the VPS is all the money I want to spend on this for the time being. So, to help solve that I want to have my backup computer be my home desktop computer. Assuming I'm using RSync, is it possible to use my Vista based home computer to become the destination for the backup? And if it is possible, what type of command or connection would I need to configure on the vista machine? Any insight would be helpful. It's probably obvious, but I've never used RSync.

  Read the article

• Help with my application please! Can't open image(s) with error: External component has thrown an ex

  - by Brandon

  I have an application written in C# I believe and it adds images to a SQL Server 2005 Database. It requires .NET 3.5 to be installed on my computer. I installed .NET 3.5 and setup a database. It runs fine but then once it gets to image 100 when running on one computer, It stops and gives me this error: Can't open image(s) with error: External component has thrown an exception.... When I run the program on my own computer I am able to reach 300 images but then it stops after 300 images and gives me Can't open image(s) with error: External component has thrown an exception.... error once again. please help!

  Read the article

• How do I prevent internet access to a group of computers on my network?

  - by Kevin Boyd

  Well I have the following setup... Computer A , B and C are networked.... Computer A is connected to the internet, computer B and C are not setup for internet access currently but I guess its possible with some kind of setting they would eventually be able to access the internet and this is what I would like to prevent. In summary only A should have internet access while A and B and C should still be on intranet. Is this kind of config possible?, what kind of software or setup or tools would I need to achive this?

  Read the article

• Auto backup a user folder to a usb when usb is plugged in

  - by Azztech Computers

  I'm a computer technician and help customers everyday with their computers and smartphones and have a really basic (i think) request but dont know how to go about it. Customer always come in with broken phones, water damage, needing updates, or just want me to backup their information. I currently have a program that i use when i backup their computers it backups their iOS folder C:\Users\USER\AppData\Roaming\Apple Computer\MobileSync\Backup but what i want is a quick easy way to do this in customers houses. What i require is a way when i plug in a USB drive it AUTOMATICALLY searches for the folder and starts transferring the folder to a predefined folder on the USB drive. This was I can just plug it in and begin work on their computer or phone without the risk of losing their information. I'm sure there is a .bat/.ini file i could use but wondering if someone has already done this or something similar as I would need it to search all the USER folders not just the one I'm logged into. Thanks in advance

  Read the article

• Can't open Control Panel or IE

  - by Josh

  I have a XP computer where when ever I try to open Control Panel nothing happens, nothing flashes on the screen. Same thing with Internet Explorer. I've scanned the computer with Malwarebytes and Avast, Malwaresbytes found some Adware which it removed without problems. Avast found nothing. I looked at the running processes with Process Explorer, nothing malicious running. And looked at a Process Monitor output when I tried to run IE, nothing obviously wrong. The process just decides to exit. What can I try next? I would suspect corrupt IE install but Control Panel doesn't work either. UPDATE: Nether work in Safe Mode under the user account. (only 1 user on the computer) But in Safe Mode, under the built in Administrator account, they work. So what ever is broken, is only broken in the one account. Anything under the HKCU registry key that could break this?

  Read the article

• Boot process enter an infinite loop after installing Ubuntu 11.04 together with Windos 7 and XP

  - by Andreafc

  I have a new computer ACER Aspire X3960 which came with Widows 7 preinstalled. I made a new partition where I installed Windows XP and then I installed in new logical partitions (a Swap, a / and a /home partition) Ubuntu 11.04. At the end of the process, the computer enters the very first screen where it says "press DEL to enter BIOS setup, press F12 to enter BOOT options". After a few seconds, the screen goes blank, the computer beeps and then it presents the same screen again. It doesn't even ever go to the grub options of which operating system I want to start. It just loops there forever. I tried to fix the (eventually damaged) grub following these instructions (unfortunately in german) http://wiki.ubuntuusers.de/GRUB_2/Reparatur from a LiveUSB, which I'm also using to post this question. Now I found here that someone asked for the results of the Boot Info Script. Here are mine (I hope I did right in trying to upload the file): http://paste.ubuntu.com/736032/ Can anybody help? Thank you very much. Andreafc

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• How to prevent slow printer performance when AD is not available

  - by AKoran

  When I take a domain based computer (Windows XP) and plug it into a network that doesn't have access to the AD, the first time I select a local printer (printing directly to printer) on the current network it takes a good 20-30 seconds before I can select the printer. Doing a little investigating using wireshark I can see the computer is trying to hit AD for some reason and it just keeps timing out. I also tried the same experiment with just a plain workgroup computer and it was able to bring the printer up immediately. Does anyone know how to prevent the machine from trying to contact AD?

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >