Search Results

Search found 29222 results on 1169 pages for 'network security'.

Page 153/1169 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

  • Raspberry pi slows down my entire network

    - by gnusouth
    Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

    Read the article

  • Linux will not activate wireless after device has been re-enabled

    - by XHR
    Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook. Edit I noticed this question is getting a lot of views. To give a quick update, I never did resolve this issue with the given distro's. However, I'm currently running Ubuntu 10.10 netbook edition and this issue has gone away.

    Read the article

  • Choosing gateway router/firewall for small datacenter network [closed]

    - by rvs
    I'm choosing a gateway router/firewall for small internal network for medium-sized web service. Currently there are 5 servers in internal network, up to 50 http(s) requests/second, up to 1000 simultaneous connections, uplink is 100 Mbit. So, network is relatively small and not very busy and we don't like to buy some pricey monster like cisco or jupiper for this site. Instead we'd like to buy two affordable devices (one for spare), which can handle our workload now and some time in future (it might be up to 2x more in 1 year). I had some experience with Sonicwall NSA, but it seems to be too complex for this site (we don't need most of its features) and even too pricey when buying two of them. So, after some research I've come up with following options: Netgear Prosecure UTM Series (probably UTM25) Zyxel ZyWall Series (USG100 or USG200) Sonicwall TZ 210 Is this a good idea? All of the above seems to be more office products, not datacenter ones. Or we should stick with Sonicwall NSA? Does anyone have any hands-on experience with this models? Maybe some other advices? Thanks.

    Read the article

  • Cisco 1242 WAP Bridging

    - by DanWake
    I'm looking to connect two facilities with a a pair of Cisco 1242 access points and am looking for advice on configuration. We have multiple VLANs running that will need to be passed through the connection, but otherwise a fairly simple setup. Any advice on best practices from security, reliability, and speed points of views?

    Read the article

  • PHP application failed to connect after a network plugged back in

    - by tntu
    My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

    Read the article

  • Remote network traffic not passing through VPN

    - by John Virgolino
    We have the following topology: LAN A LAN B LAN C 10.14.0.0/16 <-VPN-> 10.18.0.0/16 --- SONICWALL <-VPN-> M0N0WALL --- 10.32.0.0/16 Traffic between LAN A and LAN B works perfectly. Traffic between LAN C and LAN B works perfectly. Traffic between LAN A and LAN C, not so much. LAN A's gateway has a route to LAN C that points to the Sonicwall. The Sonicwall has a route to LAN A pointing to the VPN gateway connecting LAN B to LAN A. Tracing packets on the Sonicwall shows the LAN C destined traffic to arrive on the Sonicwall, but it does not forward the traffic, it dies there. Traffic from LAN B gets forwarded. Tracing packets on the Sonicwall while sending traffic from LAN C destined for LAN A shows nothing. This tells me that the M0N0WALL is not forwarding traffic for the 10.14.0.0 network and the Sonicwall is not forwarding from 10.14.0.0. The SA on the Sonicwall terminates on the WAN ZONE and is defined to use an address group that incorporates both the 10.14.0.0 and 10.18.0.0 networks. The M0N0WALL is configured for the 10.18.0.0 network and I have tried with both a static route to 10.14.0.0 and without on the M0N0WALL. I tried manually adding the 10.14.0.0 network to the SA on the M0N0WALL, but that really aggravated it and the SA never came up, so I reverted. I have checked all the firewall rules to make sure nothing is blocked. All of the Sonicwall auto-added rules look right. Specs: Sonicwall TZ200, Enhanced OS M0N0WALL v1.32 I'm at a loss at this point. Any help would be appreciated.

    Read the article

  • pfSense routing between two routers with shared network

    - by JohnCC
    I have a network set-up using two pfSense routers arranged like this:- DMZ1 WAN1 WAN2 DMZ2 | | | | | | | | \___ PF1 PF2___/ | | | | \___TRUSTED___/ Each pfSense router has its own separate WAN connection, and a separate DMZ network attached to it. They share a common TRUSTED LAN between them. The machines on the trusted network have PF1 as their default gateway. PF1 has a static route defined to DMZ2 via PF2, and PF2 has a static route to DMZ1 via PF1. There is NAT to the WAN but internal networks (DMZ1/2 and TRUSTED) use different RFC1918 subnets. I inherited this arrangement, and all used to work fine. I made a config change to PF1 (relating to multicast), and machines on DMZ2 suddenly could not talk to TRUSTED. I rolled the change back, but the problem persisted. What I guess you'd hope would happen is that TCP packets would go DMZ2 - PF2 - TRUSTED and on return TRUSTED - PF1 - PF2 - DMZ2. That's the only way I can see it would have worked. However, PF1 drops the returning packets. I've verified this using tcpdump. I've worked around this by adding static routes to DMZ2 via PF2 to the servers on TRUSTED, but some devices on there do not support static routes so this is not ideal. Is there way to make this arrangement work decently, or is the design inherently flawed? Thanks!

    Read the article

  • Private VOIP network

    - by SuppositoryPlacebo
    I own a small private security services business. Some of my clients require 2-10 security officers per location. I'm trying to think outside the box in order to solve my communications problem. I'd rather not buy or lease hf radios or voip systems at the current rates. I'm wondering if there is an existing system, or if is at all possible, to setup a private communications network using only a server and bluetooth devices or a wifi/bluethooth combination. http://25.media.tumblr.com/tumblr_m44f0pn7BL1rwp6tgo1_1280.png I don't need "radio" per se. I just need a simple, private voip network. Is there an existing device that consists of nothing more than a wifi adapter to control a bluetooth device?

    Read the article

  • No network connection for vmware esxi guests

    - by JavaDev
    I'm new to VMware and setting up an Esxi server as a trial with the intention of possibly virtualizing some of our servers in the near future. I have setup ESXi on a Dell poweredge server, and installed a Centos 5.6 and Ubuntu 11.04 guest os on the server. However I cannot get networking on my guest OS's. The host is connected to a network with a DHCP server via a switch and is configured with a static IP. I have the default set-up for networking on the host: both guests are connected to the default vmnic1 adapter via the virtual switch vSwitch0. One thing though, the virtual adapter shows 'Observed IP ranges' to be XXX.XXX.XXX.194-XXX.XXX.XXX.195 (I've blanked out the initial prefixes) i.e just 1 address, even though the network the host is connected to has the usual 255.255.255.0 subnet mask. On the guest machines (using DHCP) by default, I can see an eth0 interface but with no connection or assigned IP address. A physical machine connected to the network gets a DHCP lease as expected. How do I get networking working on my guest OSes? Apologies for the long-winded question.

    Read the article

  • Windows mounted network drives slow after upgrading switch

    - by Kver
    On our small business network our old 10/100 consumer grade switch gave up the ghost, and we replaced it with a proper business-grade gigabyte switch. After wiring it in our Linux and Mac users immediately got back to working off of network drives; But 2 of our 3 Windows 7 PCs have suddenly experienced a tremendous slowdown with mapped network drives; Windows will become stuck "discovering" a folder causing applications to freeze when trying to open files. It will instantly display and browse files, but the moment you try to open one the bug hits. To remedy this we have our users copying files to the desktop, but it can take a few minutes while windows is stuck "calculating" the time it will take to copy. These aren't big files, mostly excel sheets less than 500KB - these operations are instant on Linux and Mac. (The third Windows machine is having no issues) I've tried remapping the drives, mapping to different drive letters, rebooting, etc. I'm at a loss, because switches are mostly transparent, and it's only after the switch was replaced that the Windows PCs started acting up. What black-magic voodoo am I missing to make Windows work? Thank you.

    Read the article

  • Window 7 image in vmware will allow network connection out but not http

    - by Ormis
    I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

    Read the article

  • Windows 7 'Unidentified Network'

    - by Throdne
    So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

    Read the article

  • Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

    - by user94217
    I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

    Read the article

  • Service redirection on same network

    - by Unode
    I have a network on which I run multiple servers each dedicated to a given service. Because most services run on distinct ports I'm currently looking for a way of unifying "all" services into a single "proxy" machine. The idea is to abstract which machine is being accessed but still allow direct connection if needed/requested. This "proxy" machine has only one network interface which is part of the same network as all the other service providing machines. I've looked into Routing and NAT but I've so far failed to figure out how to make it work. I tried to achieve this using shorewall but couldn't find clear examples. However I'm not entirely sure this is the best/simplest strategy. With that said, what would be the best way of achieving this result? Example case: Proxy IP - Listening port - Send requests to 192.168.0.50 80 192.168.0.1:80 " 22 192.168.0.2:2222 " 3306 192.168.0.3:3000 " 5432 192.168.0.4:5432 " 5222 192.168.0.5:5222 PS: I'm not concerned with the single-point-of-failure nature of the proxy. Thanks

    Read the article

  • how to build network across buildings ?

    - by Omie
    Hi ! I need some help in building a network between hundreds of computers spread across multiple buildings of my college. Yes, I'll be doing this as a part of my college project. Please see this image, it will give you enough idea of what I'm trying to achieve. http://i.imgur.com/rOohx.png All the computers in all buildings should be able to connect server. Once network is up, there will be a set of services over intranet and network use will be moderate. well, say there will be an email server and a http server. My point is, I cannot afford much of performance loss. It feels easy to connect computers inside 1 building to each other, however, I'm clueless as to how to connect all of them to server. I mean, just 1 cable won't be enough to connect 1 building to server, right ? How should I go with it ? I am not expecting detailed configuration. Just heads up will do :) Thanks

    Read the article

  • Protocol (or service publish/discovery) to detect devices in network

    - by Gobliins
    we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

    Read the article

  • VirtualBox bridged network not working as expected

    - by iby chenko
    I am having hard time getting Bridged network to work with VirtualBox. Idea is to have host as well as one or more guests on same LAN. Using NAT (default) I do get access to internet and any node on the LAN when working from one of the VM guests. However, no LAN node including host can access (or ping) guest in VM. I need to be able to use any guest as if it was a physical computer on the network (need to be accessed by any machine on LAN). According to my understanding of the VirtualBox documentation, this should be Bridged mode. I think I set it correctly, well, actually there is not much to it: 1. select Bridged mode in VM network setup 2. select physical NIC of the host to connect bridge to 3. start VM When I do this, each VM does get new IP address that corresponds to LAN settings : 192.168.1.100 192.168.1.102 192.168.1.103 etc. where host is 192.168.1.80 / 255.255.255.0 (IP addresses above 100 are served by DHCP server). This seem to be correct based on what I know about ethernet. From VM I can ping other nodes like 192.168.1.50 etc. and I still get ethernet access. So far so good... But I STILL cannot ping any of the other VMs (running ones of course). I cannot ping them from other VMs, from host or from other nodes on the LAN. Aside from fact that IP addresses handed to guests are now local, this still acts same as NAT. What is going on? What am I missing? Regards, I

    Read the article

  • Can't access apache from outsite my local network

    - by valter
    UPDATED: Now, when I type my external ip like xxx.xxx.xxx.xxx:8079, i can access xampp defaults page. But the strange is that when someone else from outside my network, try to access it using the same ip, it doesnt work. I Think it should, because its the external ip. I'm getting crazy. I have tried for hours to access xampp defaults page from outside my local network. My ISP blocks port 80 and 8080. So I changed apache to listen to port 8079 Listen 8079 My local computer ip is 10.1.1.2 I can access the webserver, from any computer on my local network when I type http://10.1.1.2:8079 I also oppended the port 8079 on my modem, as the image shows bellow. (I think i did it right) When apache is running on my computer, if I test the port 8079 at http://canyouseeme.org/ i get the message "Success: I can see your service on xxx.xxx.xxx.xxx on port (8079) Your ISP is not blocking port 8079" If apache is not running I get "Error: I could not see your service on xxx.xxx.xxx.xxx on port (8079) Reason: Connection refused". So, it's clear that the port 8079 is oppened. But when I type xxx.xxx.xxx.xxx:8079 on google chrome for example, I get Oops! Google Chrome could not connect to xxx.xxx.xxx.xxx:8079 What can I do to solve this, to allow apache to server the pages? I don't know what else I shoud configure. Please, help me. Thanks.

    Read the article

  • How do I fix a permissions problem with MS Distributed File System?

    - by charlesrandall
    I have a computer that is new, Windows 7, that is supposed to have access to particular network resources on a Distributed File System. However, despite all permissions being set correctly, I have consistent trouble accessing them. For instance, I'm supposed to be able to reach \company.org\main\subdir. All the permissions have been granted, only when I try to access it by name, it tells me I don't have permission to access \main. This is where the fun starts. If I ping company.org, get the IP, replace company.org by the IP, I can then access \IP\main\subdir without any problems at all. However we have a ton of scripts and build tools that access the network resource by name. My sysadmin has found that using MS's dfsutil.exe, we can fix it temporary using this sequence of commands: C:\dfsutil.exe /pktinfo C:\dfsutil.exe /PktFlush C:\dfsutil.exe /SpcFlush C:\dfsutil.exe /PurgeMupCache C:\dfsutil.exe /pktinfo After that, everything is great... until I reboot, or until some unspecified time later where suddenly I don't have access to \main\ anymore. Hoping to find a more permanent solution than waiting for it to break and running a batch file.

    Read the article

  • Shares Not working

    - by Crash893
    I'm running a ms server 2012 box acting as a file server, I've set up 4 shares (IT SECURITY PUBLIC HR) to start out with each share has its corresponding group as full permissions to the folder however when I access the server \server\it it says i don't have permissions. Public has NTLM AUTH as its full read/write and i can't even get into that Clearly im doing something wrong but im very new to windows server and im not sure how to start trouble shooting.

    Read the article

  • Computers on network crashing

    - by Phil Cross
    We have recently upgraded our network to Windows 7 clients with Windows server 2008 servers. The upgrade was completed by the end of September and until now has been fine (apart from the minor bugs). Recently (within the last 2 weeks) we've notice all computers on the network (around 1000) start to slow down to the point their unusable. It starts at about 08:45 and finishes at 09:15. Because of this, we think something may be broadcasting across the network. This happens every day, between these times. I cant use my computer at all at the slowdown peak, and looking at task managers performance graphs, Physical memory is hovering around 35% and CPU usage is at 0-10% (idle) yet still crashing. I've looked on DHCPs server log and cant see anything which stands out. The only change we made prior to the slowdown was installing adobe CS6 on some computers, however the slowdown affects computers without CS6. We have 2 physical machines, each with around 5-7 virtual machines running on them with ample memory. Does anyone have any suggestions as to what we can do to narrow down whats causing the crashes? Any help, suggestions or advice would be appreciated.

    Read the article

  • Corrupted Laptop - Transfer Data Without My Computer (explorer.exe) Using Command Line

    - by nicorellius
    I have a laptop (Toshiba Satellite) that is pretty messed up. The person this belongs too already replaced it with a new machine. My job is to transfer all her data from this machine to disk so that I can transfer it to her. She doesn't want to lose any data (understandably so). Any operation I attempted (i.e., double clicking on any folder icon, like My Documents, My Computer, etc) resulted din a complete crash. The only good news is that I can actually start and navigate around using the command line. Also, I can access the internet. I have a network, so if I can map the drives I can get this thing figured out (hopefully). Also, I tried a USB drive but I couldn't figure out how to access it from the command line. Two questions (I need to use the command line for these): How would I go about accessing the USB drive and how can I map the shared drives on my network so that I may cd to that directory for use of the copy command?

    Read the article

  • A single request appears to have come from all the browsers? Should I be worried?

    - by HorusKol
    I was looking over my site access logs when I noticed a request with the following user agent string: "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" The request appears to have originated from 91.121.153.210 - which appears to be owned by these guys: http://www.medialta.eu/accueil.html I find this rather impressive - a request from 'all' user-agents. There's actually quite a few of these requests over at least the few days - so it naturally piqued my interested. Searching Google simply seems to produce a very long list of websites which make their Apache access logs publicly available... Is this some weird indication that we're being targeted? And by who?

    Read the article

  • Protecting Apache with Fail2Ban

    - by NetStudent
    Having checked my Apache logs for the last two days I have noticed several attempts to access URLs such as /phpmyadmin, /phpldapadmin: 121.14.241.135 - - [09/Jun/2012:04:37:35 +0100] "GET /w00tw00t.at.blackhats.romanian.anti-sec:) HTTP/1.1" 404 415 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:35 +0100] "GET /phpMyAdmin/scripts/setup.php HTTP/1.1" 404 405 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:35 +0100] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 404 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:36 +0100] "GET /pma/scripts/setup.php HTTP/1.1" 404 399 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:36 +0100] "GET /myadmin/scripts/setup.php HTTP/1.1" 404 403 "-" "ZmEu" 121.14.241.135 - - [09/Jun/2012:04:37:37 +0100] "GET /MyAdmin/scripts/setup.php HTTP/1.1" 404 403 "-" "ZmEu" 66.249.72.235 - - [09/Jun/2012:07:11:06 +0100] "GET /robots.txt HTTP/1.1" 404 430 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.72.235 - - [09/Jun/2012:07:11:06 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 188.132.178.34 - - [09/Jun/2012:08:39:05 +0100] "HEAD /manager/html HTTP/1.0" 404 166 "-" "-" 95.108.150.235 - - [09/Jun/2012:09:42:09 +0100] "GET /robots.txt HTTP/1.1" 404 432 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:09 +0100] "GET /robots.txt HTTP/1.1" 404 432 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:10 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:10 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:11 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 95.108.150.235 - - [09/Jun/2012:09:42:11 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; YandexBot/3.0; +http://yandex.com/bots)" 194.128.132.2 - - [09/Jun/2012:16:04:41 +0100] "HEAD / HTTP/1.0" 200 260 "-" "-" 66.249.68.176 - - [09/Jun/2012:18:08:12 +0100] "GET /robots.txt HTTP/1.1" 404 430 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.68.176 - - [09/Jun/2012:18:08:13 +0100] "GET / HTTP/1.1" 200 424 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 212.3.106.249 - - [09/Jun/2012:18:12:33 +0100] "GET / HTTP/1.1" 200 388 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:34 +0100] "GET /phpldapadmin/ HTTP/1.1" 404 379 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:34 +0100] "GET /phpldapadmin/htdocs/ HTTP/1.1" 404 386 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:35 +0100] "GET /phpldap/ HTTP/1.1" 404 374 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:36 +0100] "GET /phpldap/htdocs/ HTTP/1.1" 404 381 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:36 +0100] "GET /admin/ HTTP/1.1" 404 372 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:38 +0100] "GET /admin/ldap/ HTTP/1.1" 404 377 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:38 +0100] "GET /admin/ldap/htdocs/ HTTP/1.1" 404 384 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:38 +0100] "GET /admin/phpldap/ HTTP/1.1" 404 380 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:39 +0100] "GET /admin/phpldap/htdocs/ HTTP/1.1" 404 387 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:39 +0100] "GET /admin/phpldapadmin/htdocs/ HTTP/1.1" 404 392 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:40 +0100] "GET /admin/phpldapadmin/ HTTP/1.1" 404 385 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:40 +0100] "GET /openldap HTTP/1.1" 404 374 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:41 +0100] "GET /openldap/htdocs HTTP/1.1" 404 381 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:42 +0100] "GET /openldap/htdocs/ HTTP/1.1" 404 382 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:44 +0100] "GET /ldap/ HTTP/1.1" 404 371 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:44 +0100] "GET /ldap/htdocs/ HTTP/1.1" 404 378 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:45 +0100] "GET /ldap/phpldapadmin/ HTTP/1.1" 404 384 "-" "-" 212.3.106.249 - - [09/Jun/2012:18:12:46 +0100] "GET /ldap/phpldapadmin/htdocs/ HTTP/1.1" 404 391 "-" "-" Is there any way I can use Fail2Ban or any other similar software to ban these IPs in situations when my server is being abused this way (by trying several "common" URLs)?

    Read the article

  • suspicious crawler activity

    - by ithkuil
    I'm noticing that I get accesses 66.249.66.198 - - [01/Jul/2011:17:13:46 +0200] "GET /img/clip.incubus.torrent.phtml HTTP/1.1" 404 143 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.66.198 - - [01/Jul/2011:17:13:48 +0200] "GET /img/clip.global.deejays.download.phtml HTTP/1.1" 404 143 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" that files don't exist and there is no file on my site that has this content (I hope). Why is googlebot trying out these links? reverse dns and whois state that 66.249.66.198 is really googlebot.

    Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >