Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 153/516 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

  • CentOS OpenVZ fail to boot after kernel update

    - by SkechBoy
    After upgrading to latest OpenVZ kernel CentOS server won't boot. When i try go boot the latest kernel server is stuck at this point: (note that images are taken from virtual kvm) http://i.stack.imgur.com/4lusz.jpg Then i try to start the server on some old kernels and than i get this error message: kernel panic - not syncing - attempted to kill init better shown on this image: http://i.stack.imgur.com/2SReF.jpg Here is some useful information fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2995.7 GB, 2995739688960 bytes 255 heads, 63 sectors/track, 364211 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c4e4 Device Boot Start End Blocks Id System /dev/sda1 1 523 4199044+ 82 Linux swap / Solaris /dev/sda2 524 785 2104515 83 Linux /dev/sda3 786 261869 2097157230 83 Linux /dev/sda4 261870 364211 822062115 83 Linux /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/sda1 none swap sw 0 0 /dev/sda2 /boot ext3 defaults 0 0 /dev/sda3 / ext3 defaults 0 0 /dev/sda4 /home ext3 defaults 0 0 and grub config file: title OpenVZ (2.6.18-274.18.1.el5.028stab098.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.18.1.el5.028stab098.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.18.1.el5.028stab098.1.img title OpenVZ (2.6.18-274.7.1.el5.028stab095.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.7.1.el5.028stab095.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.7.1.el5.028stab095.1.img title OpenVZ (2.6.18-194.8.1.el5.028stab070.4) root (hd0,1) kernel /vmlinuz-2.6.18-194.8.1.el5.028stab070.4 ro root=/dev/sda3 vga=0x317 initrd /initrd-2.6.18-194.8.1.el5.028stab070.4.img Any help is greatly appreciated Thanks.

    Read the article

  • ESXi 5 Guests will not boot

    - by Adrian
    I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

    Read the article

  • Blank Screen at boot Ubuntu 12.04 - nvidia-current - Macbook Air 3,2

    - by soulnafein
    I've installed nvidia-current using the Additional Drivers application in Ubuntu 12.04. I need those drivers so I can use accelerated WebGL. After installing the drivers, and rebooting X fails to start and I have a frozen system/dark screen. Below is the content of Xorg.0.log How can I fix this problem? [ 4.666] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 4.666] X Protocol Version 11, Revision 0 [ 4.666] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 4.666] Current Operating System: Linux david-macbook-air 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 4.666] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=b3d5ae2a-72af-4ef9-b775-0d40b5f80f9b ro quiet splash vt.handoff=7 [ 4.666] Build Date: 29 August 2012 12:12:33AM [ 4.666] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 4.666] Current version of pixman: 0.24.4 [ 4.666] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.666] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.666] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13 10:18:02 2012 [ 4.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.668] (==) No Layout section. Using the first Screen section. [ 4.668] (==) No screen section available. Using defaults. [ 4.668] (**) |-->Screen "Default Screen Section" (0) [ 4.668] (**) | |-->Monitor "<default monitor>" [ 4.668] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.668] (==) Automatically adding devices [ 4.668] (==) Automatically enabling devices [ 4.668] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4.668] Entry deleted from font path. [ 4.668] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 4.668] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 4.669] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 4.669] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.669] (II) Loader magic: 0x7f6222467b00 [ 4.669] (II) Module ABI versions: [ 4.669] X.Org ANSI C Emulation: 0.4 [ 4.669] X.Org Video Driver: 11.0 [ 4.669] X.Org XInput driver : 16.0 [ 4.669] X.Org Server Extension : 6.0 [ 4.670] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072 [ 4.670] (II) Open ACPI successful (/var/run/acpid.socket) [ 4.670] (II) LoadModule: "extmod" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 4.671] (II) Module extmod: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension MIT-SCREEN-SAVER [ 4.671] (II) Loading extension XFree86-VidModeExtension [ 4.671] (II) Loading extension XFree86-DGA [ 4.671] (II) Loading extension DPMS [ 4.671] (II) Loading extension XVideo [ 4.671] (II) Loading extension XVideo-MotionCompensation [ 4.671] (II) Loading extension X-Resource [ 4.671] (II) LoadModule: "dbe" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 4.671] (II) Module dbe: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension DOUBLE-BUFFER [ 4.671] (II) LoadModule: "glx" [ 4.671] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 4.869] (II) Module glx: vendor="NVIDIA Corporation" [ 4.869] compiled for 4.0.2, module version = 1.0.0 [ 4.869] Module class: X.Org Server Extension [ 4.869] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012 [ 4.869] (II) Loading extension GLX [ 4.869] (II) LoadModule: "record" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 4.870] (II) Module record: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.13.0 [ 4.870] Module class: X.Org Server Extension [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension RECORD [ 4.870] (II) LoadModule: "dri" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 4.870] (II) Module dri: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.0.0 [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension XFree86-DRI [ 4.870] (II) LoadModule: "dri2" [ 4.871] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 4.871] (II) Module dri2: vendor="X.Org Foundation" [ 4.871] compiled for 1.11.3, module version = 1.2.0 [ 4.871] ABI class: X.Org Server Extension, version 6.0 [ 4.871] (II) Loading extension DRI2 [ 4.871] (==) Matched nvidia as autoconfigured driver 0 [ 4.871] (==) Matched nouveau as autoconfigured driver 1 [ 4.871] (==) Matched nv as autoconfigured driver 2 [ 4.871] (==) Matched vesa as autoconfigured driver 3 [ 4.871] (==) Matched fbdev as autoconfigured driver 4 [ 4.871] (==) Assigned the driver to the xf86ConfigLayout [ 4.871] (II) LoadModule: "nvidia" [ 4.871] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.887] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.887] compiled for 4.0.2, module version = 1.0.0 [ 4.887] Module class: X.Org Video Driver [ 4.892] (II) LoadModule: "nouveau" [ 4.894] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.894] (II) Module nouveau: vendor="X.Org Foundation" [ 4.894] compiled for 1.11.3, module version = 1.0.2 [ 4.894] Module class: X.Org Video Driver [ 4.894] ABI class: X.Org Video Driver, version 11.0 [ 4.894] (II) LoadModule: "nv" [ 4.895] (WW) Warning, couldn't open module nv [ 4.895] (II) UnloadModule: "nv" [ 4.895] (II) Unloading nv [ 4.895] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.895] (II) LoadModule: "vesa" [ 4.895] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.896] (II) Module vesa: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 2.3.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (II) LoadModule: "fbdev" [ 4.896] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.896] (II) Module fbdev: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 0.4.2 [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (==) Matched nvidia as autoconfigured driver 0 [ 4.896] (==) Matched nouveau as autoconfigured driver 1 [ 4.896] (==) Matched nv as autoconfigured driver 2 [ 4.896] (==) Matched vesa as autoconfigured driver 3 [ 4.896] (==) Matched fbdev as autoconfigured driver 4 [ 4.896] (==) Assigned the driver to the xf86ConfigLayout [ 4.896] (II) LoadModule: "nvidia" [ 4.896] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.896] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.896] compiled for 4.0.2, module version = 1.0.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] (II) UnloadModule: "nvidia" [ 4.896] (II) Unloading nvidia [ 4.896] (II) Failed to load module "nvidia" (already loaded, 32610) [ 4.896] (II) LoadModule: "nouveau" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.897] (II) Module nouveau: vendor="X.Org Foundation" [ 4.897] compiled for 1.11.3, module version = 1.0.2 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 11.0 [ 4.897] (II) UnloadModule: "nouveau" [ 4.897] (II) Unloading nouveau [ 4.897] (II) Failed to load module "nouveau" (already loaded, 32610) [ 4.897] (II) LoadModule: "nv" [ 4.897] (WW) Warning, couldn't open module nv [ 4.897] (II) UnloadModule: "nv" [ 4.897] (II) Unloading nv [ 4.897] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.897] (II) LoadModule: "vesa" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.898] (II) Module vesa: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 2.3.0 [ 4.898] Module class: X.Org Video Driver [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "vesa" [ 4.898] (II) Unloading vesa [ 4.898] (II) Failed to load module "vesa" (already loaded, 0) [ 4.898] (II) LoadModule: "fbdev" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.898] (II) Module fbdev: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 0.4.2 [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "fbdev" [ 4.898] (II) Unloading fbdev [ 4.899] (II) Failed to load module "fbdev" (already loaded, 0) [ 4.899] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012 [ 4.899] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 4.899] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200 [ 4.899] (II) NOUVEAU driver for NVIDIA chipset families : [ 4.899] RIVA TNT (NV04) [ 4.899] RIVA TNT2 (NV05) [ 4.899] GeForce 256 (NV10) [ 4.899] GeForce 2 (NV11, NV15) [ 4.899] GeForce 4MX (NV17, NV18) [ 4.899] GeForce 3 (NV20) [ 4.900] GeForce 4Ti (NV25, NV28) [ 4.900] GeForce FX (NV3x) [ 4.900] GeForce 6 (NV4x) [ 4.900] GeForce 7 (G7x) [ 4.900] GeForce 8 (G8x) [ 4.900] GeForce GTX 200 (NVA0) [ 4.900] GeForce GTX 400 (NVC0) [ 4.900] (II) VESA: driver for VESA chipsets: vesa [ 4.900] (II) FBDEV: driver for framebuffer: fbdev [ 4.900] (++) using VT number 7 [ 4.902] (II) Loading sub module "fb" [ 4.902] (II) LoadModule: "fb" [ 4.902] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.902] (II) Module fb: vendor="X.Org Foundation" [ 4.902] compiled for 1.11.3, module version = 1.0.0 [ 4.902] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.902] (II) Loading sub module "wfb" [ 4.902] (II) LoadModule: "wfb" [ 4.903] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.905] (II) Module wfb: vendor="X.Org Foundation" [ 4.905] compiled for 1.11.3, module version = 1.0.0 [ 4.905] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.905] (II) Loading sub module "ramdac" [ 4.905] (II) LoadModule: "ramdac" [ 4.905] (II) Module "ramdac" already built-in [ 4.907] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.912] (WW) Falling back to old probe method for vesa [ 4.912] (WW) Falling back to old probe method for fbdev [ 4.912] (II) Loading sub module "fbdevhw" [ 4.912] (II) LoadModule: "fbdevhw" [ 4.912] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.912] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.912] compiled for 1.11.3, module version = 0.0.2 [ 4.912] ABI class: X.Org Video Driver, version 11.0 [ 4.912] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.912] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 4.912] (==) NVIDIA(0): RGB weight 888 [ 4.912] (==) NVIDIA(0): Default visual is TrueColor [ 4.912] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 4.912] (**) NVIDIA(0): Enabling 2D acceleration [ 5.442] (EE) NVIDIA(0): Failed to initialize the display subsystem for the NVIDIA [ 5.442] (EE) NVIDIA(0): graphics device! [ 5.442] (EE) NVIDIA(0): Failed to get supported display device(s) [ 5.442] (EE) NVIDIA(0): Failed to initialize dac HAL [ 5.442] (II) UnloadModule: "nvidia" [ 5.442] (II) Unloading nvidia [ 5.442] (II) UnloadModule: "wfb" [ 5.442] (II) Unloading wfb [ 5.442] (II) UnloadModule: "fb" [ 5.443] (II) Unloading fb [ 5.443] (EE) Screen(s) found, but none have a usable configuration. [ 5.443] Fatal server error: [ 5.443] no screens found [ 5.443] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 5.443] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 5.443] [ 5.447] ddxSigGiveUp: Closing log [ 5.447] Server terminated with error (1). Closing log file.

    Read the article

  • How to make my SanDisk Cruzer Blade 4GB disk back to normal?

    - by Jack
    Currently, my SanDisk Cruzer Blade 4GB have become a 64MB Firebird RAW flash drive (thumb drive). I don't know why it become like this but when I plug it into a PC, it suddenly transform itself to become a 64MB flash drive. (From 4 GB to 64 MB, that is a huge change!) I read the following articles: http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Cruzer-Blade-will-not-format/td-p/214932 http://forums.whirlpool.net.au/archive/1691847 http://forum.hddguru.com/sandiskfirebird-64mb-t23539.html and notice that their solutions does not work at all. Some of their solution is as follows: Using the HP USB Disk Storage Format Tool (http://files.extremeoverclocking.com/file.php?f=1970), which did not work for me as it could not format. Using the h2testw to see if it is genuine, which did not work for me because it is a RAW partition. Return to the vendor, which I doubt since the product only have 1 year warranty and it has expired. I also notice that the flash drive is very fragile as after a few use, the flash drive have become something like the following: (The upper cover of the USB connector was broken or torn) So, wondering if someone have any good solution to fix it back so that at least I can retrieve my data on the fragile thumb drive.

    Read the article

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Windows XP - Power surge on hub port

    - by Swift-Tuttle
    Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

    Read the article

  • Backup data rate on Raspberry Pi maxing out at 5 Mb/s. Why?

    - by bastibe
    I set up my Raspberry Pi as a Time Machine, as documented here. At the moment, the Raspberry Pi is connected to my MacBook Pro using a direct Ethernet cable. Also, an external hard drive (laptop drive) is connected to the Raspberry Pi using the USB port. However, backups are pretty slow. Activity Monitor claims that the Network is transferring a very steady 5 Mb/s, where my Time Capsule is transferring up to 8 Mb/s with a lot of fluctuation. The Raspberry Pi self-reports (top) that its CPU is only half-used, with about equal parts afpd, usb-storage and jbd2/sda1-8. Thus, I think that the processing power of the Raspberry Pi does not seem to be the problem here. To me, this looks like there is some kind of bottleneck that maxes out at 5 Mb/s thus potentially having my backups run at less than their potential speed. To the best of my knowledge, this might be the afp-daemon, the usb-bus or the external hard drive. So, my question is, how could I identify the true culprit and what can I do about it?

    Read the article

  • Copying SD Cards with "LaCie d2 Network"

    - by rjstelling
    The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

    Read the article

  • need to bring back win 7

    - by user290513
    I like making music and playing games and occasionally do some Photoshop. I had a windows 8 computer but my mouse pointer always got stuck, so to try out something new I installed Ubuntu. here is how I installed it: Went to advanced statup options clicked on "use a device" after plugging in my bootable USB with Ubuntu replaced my windows 8 and installed Ubuntu 14.04 LTS I hope I did it correctly though. So after a few months I could've really find out a good Audio Production (not LMMS, because I use Stagelight) software nor something that could be familiar to the UI of Photoshop. So I decided to bring back Windows, but because of the bad experience of 8 I thought about bringing back win 7 So I used an app named WinUSB to make my bootable USB drive after formatting it to NTFS in GParted But when I go to my grub menu, my USB doesn't show up and my PC being a UEFI device. I don't know how to get to the bios of my device. Can somebody tell how to install Windows 7 completely and deleting Ubuntu or at least give me a link to a tutorial. I have a netbook: it is an Acer Aspire One 725. I'm fine with using commands in terminal and another thing that my laptop doesn't have a CD drive or reader, I can't put a CD inside

    Read the article

  • Windows XP - Power surge on hub port

    - by Swift-Tuttle
    Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

    Read the article

  • Unable to install drivers of any kind of device on windows 8.1

    - by saadj55
    Windows 8.1 is unable to install drivers. First, I wanted to install Android ADB drivers for my Chinese Android Phone. I downloaded the relevant drivers from the manufacturers site and enabled USB debugging on my phone and tried to install it but Windows failed to find any drivers in the driver folder. After searching on google, I got to know that I will have to edit the win_usb.inf file in order to install the drivers so I did the editing part also. Added these line: %SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C03 %CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C03 to both NTamd and NTx86 sections but the problem persists. Phone's current hardware id is: VID_0BB4&PID_0C03 I noticed that I need hardware ID with &MI_01 appended at the end. But Windows detects the device with the above hardware ID. I have the webcam drivers so I uninstalled WebCam Drivers to check if they can be installed back but I am also not able to install drivers for it. Windows is detecting the camera without that &MI_01 part. Please help. I cannot install webcam nor my android phone.

    Read the article

  • Backtrack installation interrupted once, installed another time

    - by Bernard
    I installed Backtrack 5 from a Live CD yesterday and while installing, i closed my laptop to let it run while I sleep. But then I remembered my friend told me the plastic of his computer melted this way, so i opened it again. It put it on power save, and somehow the installation was interrupted. The day after, I tried again and this time it worked. Now, I have a GRUB Menu With Win7 and twice the Ubuntu + Safe mode or whatever it's called. How can I remove the failed installation without deleting Win7 or the successful installation? Normally I would use EasyBCD and delete the partitions, but this time I couldn't start Backtrack then. Thanks in advance Bernard

    Read the article

  • Problems with graphics of Sony Vaio Z

    - by dpcat237
    Hello, I have problem with my Sony Vaio Z VPCZ1. It has physical selector of GPUs which Linux kernel not detect. So after GRUB I see black display (I tried different distributions of Ubuntu and other Linux OS). I read in Ubuntu 10.10 was solve same problem with hybrid graphics but not in my case ^^ I found solutions (not easy at do) for oldest models. But I'm not expert in Linux and before I prefer ask people with more experience. Somebody can help me? Someone installed Ubuntu in same laptop? PS. for more information I found different webs: http://goo.gl/ktvq Thanks Regards

    Read the article

  • Having problems booting xubuntu after installation

    - by lagaffenewbe
    I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

    Read the article

  • Couldn't pass the signin screen

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • How to "un-automount" external harddrive?

    - by Timon
    So I dualboot 12.10 and Win7. Both OSs are on the primary SSD while all commonly used data (documents, movies, music, profiles etc) is on a secondary NTFS-formatted HDD. Since I needed the NTFS drive to automatically mount in Ubuntu right at startup, I downloaded ntfs-config and set it to automount my NTFS drive. Problem is, I also accidentally told it to automount my external hard drive (which is also NTFS formatted). When booting up Ubuntu, it now checks for the presence of that drive every single time, which is getting annoying 'cause I don't always have it connected. I've tried un- and reinstalling ntfs-config, telling it to not automount the external HD, but to no avail. Any suggestions?

    Read the article

  • How do I keep my Huawei E3131 3G modem from unmounting?

    - by John Perez
    I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

    Read the article

  • How do I stop Gimp from autolaunching on startup?

    - by Joshua Fox
    Gimp launches every time I log into Xubuntu (v. 13.10). Gimp is not shown under Settings Manager- Sessions and startup. It does not appear in ~/.config/autostart. I immediately close Gimp in these cases, so it is not running when I shut down the session. How do I stop Gimp from autolaunching on startup? Diagnostic Info: Note that cd / find . -name gimp.desktop Only produces ./usr/share/applications/gimp.desktop and nothing else Here is the output of grep -lIr 'gimp' ~/ ~/Gimp-search-results.txt sbin/vgimportclone home/joshua/.gimp-2.8/controllerrc home/joshua/.gimp-2.8/tags.xml home/joshua/.gimp-2.8/dockrc home/joshua/.gimp-2.8/gimprc home/joshua/.gimp-2.8/themerc home/joshua/.gimp-2.8/templaterc home/joshua/.gimp-2.8/gtkrc home/joshua/.gimp-2.8/sessionrc home/joshua/.gimp-2.8/toolrc home/joshua/.gimp-2.8/pluginrc home/joshua/.gimp-2.8/menurc home/joshua/Gimp-search-results.txt home/joshua/.local/share/ristretto/mime.db home/joshua/.wine/drive_c/windows/system32/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.wine/drive_c/windows/syswow64/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,skype,,0495938f41334883bd3a67d3b164c1d1 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,gnome-utils,,91bba9b826fb21dbfc3aad6d3bd771cb home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,icedtea-plugin,,7bb5e4ad0469ef8277032c048b9d7328 home/joshua/.cache/software-center/piston-helper/reviews.ubuntu.com,reviews,api,1.0,review-stats,any,any,,1c66e24123164bb80c4253965e29eed7 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,wine1.4,,2bac05a75dcec604ee91e58027eb4165 home/joshua/.cache/software-center/piston-helper/software-center.ubuntu.com,api,2.0,applications,en,ubuntu,saucy,amd64,,32b432ef7e12661055c87e3ea0f3b5d5 home/joshua/.cache/software-center/apthistory.p home/joshua/.cache/software-center/reviews.ubuntu.com_reviews_api_1.0_review-stats-pkgnames.p home/joshua/.cache/oneconf/861c4e30b916e750f16fab5652ed5937/package_list_861c4e30b916e750f16fab5652ed5937 home/joshua/.cache/sessions/xfwm4-23e853443-fb4b-42fd-aa61-33fa99fdc12c.state home/joshua/.cache/sessions/xfce4-session-athena:0 home/joshua/.config/abiword/profile

    Read the article

  • Ubuntu 14.04.1 will not load - stops in tty1

    - by Mitya Stiglitz
    I was following some "guides" on how to clean my system and have cleaned it so well that it doesn't work anymore. Example: in synaptic, I completely removed all packages in "Not installed: residual configuration" and a ton of other packages I "don't need". I know this has probably been asked a trillion times but I really need to find out how to get back to the working OS I had about two hours ago. One hour of googling has not helped me, so I am asking here. When I start Ubuntu, usually nothing happens for quite some time and then tty1 starts. I can log in normally, but I don't know how to proceed from there. I can do: less /var/log/apt/history.log and get a log, but I don't know how to get started with this...

    Read the article

  • Internet key not always detected by the operating system

    - by Carlo Gisonni
    I've over the time, tried and installed several versions of Ubuntu. Those versions I like more than others are: Lubuntu and Kubuntu. Everything seems to work properly but the Internet key. I do not know if it may depends on the weather, the moonphase or the tides but the Internet key is not always detected by the system and is sometimes very difficult to establish a connection when I do need to connect to internet. Without applyng any change sometimes works sometimes not. I've so far not found the solution and I think is a quite strange behaviour of the operating system as if the settings are wrong, should never work Awaiting a kind answer from those of you willing to help.

    Read the article

  • Unable to configure a service to run at startup with update-rc.d

    - by ujjain
    I would like to have transmission-daemon and vnstat automatically run at startup. I was able to configure this for apache2 and proftpd with exactly the same commands. 795 sudo update-rc.d transmission-daemon remove 797 sudo update-rc.d -f transmission-daemon remove 798 sudo update-rc.d transmission-daemon defaults 799 sudo update-rc.d vnstat remove 800 sudo update-rc.d -f vnstat remove 801 sudo update-rc.d -f vnstat defaults 802 sudo update-rc.d -f vnstat enable 805 reboot 807 history root@htpc:/home/administrator# sudo update-rc.d -f transmission-daemon remove Removing any system startup links for /etc/init.d/transmission-daemon ... /etc/rc0.d/K20transmission-daemon /etc/rc1.d/K20transmission-daemon /etc/rc2.d/S20transmission-daemon /etc/rc3.d/S20transmission-daemon /etc/rc4.d/S20transmission-daemon /etc/rc5.d/S20transmission-daemon /etc/rc6.d/K20transmission-daemon root@htpc:/home/administrator# sudo update-rc.d -f transmission-daemon defaults Adding system startup for /etc/init.d/transmission-daemon ... /etc/rc0.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc1.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc6.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc2.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc3.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc4.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc5.d/S20transmission-daemon -> ../init.d/transmission-daemon root@htpc:/home/administrator# service vnstat status * vnStat daemon is not running root@htpc:/home/administrator# service transmission-daemon status * transmission-daemon is not running root@htpc:/home/administrator# service transmission-daemon start * Starting bittorrent daemon transmission-daemon [ OK ] root@htpc:/home/administrator# service vnstat start * Starting vnStat daemon vnstatd [ OK ] root@htpc:/home/administrator# service apache2 status Apache2 is running (pid 1137). root@htpc:/home/administrator#

    Read the article

  • Black screen when running xubuntu 13.10 after upgrade

    - by user213030
    I have a xubuntu v12 that I updated to v13.10. Sice the upgrade I get the black screen at a startup. I can get to the console and login. How can I run it in graphic mode? I run it on Oracle Virtualbox. Starting the VirtualBox Guest Additions ...done. Starting VirtualBox Guest Addition service ...done. saned disabled; edit /etc/default/saned; * Restoring resolver state... [ OK ] And it hangs on this.

    Read the article

  • Black screen after installing ubuntu 12.04

    - by neodyme
    :) After installing Ubuntu 12.04 from a CD, everything goes perfectly until I restart the computer (after the installation process) im not able to see the login screen, I just get a black screen! so I press randomly keys and sometimes im able to see the background wallpaper but almost instantly the black screen appears. I think that I have to update the nVidia drivers or something like this I tried to start from the recovery mode, update my package, but still the same problem I can't start with the graphical interface as well, i get an error message 'no screen' !! I dont understand why I have this problem because before the installation im able to try ubuntu (from the cd) and works perfect. Thanks !!

    Read the article

  • Palm Centro not even appearing on desktop

    - by DaimyoKirby
    Background: I'm trying to set up my dad's new installation of Xubuntu 12.10 (I finally got him to switch from Windows :-D) so he can sync his Palm Centro on his computer. I installed J-Pilot, but the problem is that his palm isn't even showing up anywhere on the computer. When it's plugged in, it lit up and began to charge when I told it to try and sync with the computer, but it failed the sync and Xubuntu still doesn't recognize it. Question: Does anyone know how I can get his Palm to be recognized by Xubuntu?

    Read the article

  • How to fix no splash screen in Ubuntu after nvidia proprietary driver installation (also black borders)

    - by Fabio Trevisiol
    This is soultion how to fix no splash screen in Ubuntu after nvidia proprietary driver installation. It's no matter what Ubuntu version you use, it should work anyway. (TESTED ON 14.04) Open your terminal and type: sudo apt-get install v86d (TEST WITHOUT) Then: sudo gedit /etc/default/grub Find this line: #GRUB_GFXMODE=640x480 Add below (of course choose your resolution): GRUB_GFXMODE=1024x768x32 (TRY WITHOUT OR DIFFERENT BIT DEPTH) GRUB_GFXPAYLOAD_LINUX=1920x1080x32 (YOU CAN ALSO USE THE KEEP OPTION) Save file and type in terminal: echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash (ALLOWS TO AVOID THAT THE SPLASH SCREEN IS DISPLAYED FOR A FEW SECONDS) sudo update-initramfs -u sudo update-grub2 For all those who complain about the presence of black borders in "plymouth", try to make these changes before installing the nvidia driver or switch back from nvidia to nouveau and from nouveau to nvidia. Kernel update from the Software Updater? It happened to me; I don't know if it matters. I don't know for which of these reasons, but after a few reboots, the black borders are gone. UPDATE discovered the secret: during all these beautiful things, something strange happened. glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: nouveau

    Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >