Search Results

Search found 5887 results on 236 pages for 'cpu temperature'.

Page 155/236 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• How do I know if my disks are being hit with too many I/O reads or writes or both?

  - by Mark F

  I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. How do I really know what the max I/O numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an I/O bound problem. Is there a better way to predict when I/O is reaching its limits? This article was interesting but not giving the answer I desire. So, is my best bet surrounding just looking at 'CPU I/O WAIT'? There must be a more reactive method than this.

  Read the article

• Server freeze restarted quickly so how do I fiond what went wrong?

  - by Charlie

  I have a SQL SERVER DB running on a windows server 2008 (VMWare) Yesterday I could not RDP to it so I ended some RDP sessions which were left logged in. This seemed to solve the problem. However last night I learned that the DB was inaccessible and unresponsive to customers. My colleague checked the server but again is unable to create an RDP connection. He then restarted the server and since it has been fine. Looking at the CPU Readings of the Server it spiked up to 100% before the original RDP problem .After I ended the extra seeions uit again dropped down to normal levels however before the time of the customer complaint it had rose to 100% again - before it had to be restarted. Is there anyway I can investigate which processes may have caused the problem in the first place. Would there be some kind of memory dump from when it was restarted. I would prefer to find out what is wrong now instead of waiting until it happens again.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• Monitor status while using VNC

  - by kumar

  So after connecting to a vnc server via vnc viewer to my desktop (remotely), Is it possible to know whether the monitor connected to the CPU is switched ON or not. Simply put, from command prompt how do you know whether monitor is ON/OFF from command line. Here, Basically I am bit worried about privacy as my monitor can be viewed by anyone while accessed remotely. Any solution? Obviously there is a option to switch off the monitor while starting the vnc server at remote side but I am looking for a better solution to control monitor(possible??) remotely. Thanks!

  Read the article

• SQL server availability issue: large query stops other connections from connecting

  - by Carlos

  I've got a high-spec (multicore, RAID) server running MS SQL 2008, with several databases on it. I have a low throughput process that periodically needs a small amount of information from one of the DBs, and the code seems to work fine. However, sometimes when one of my colleagues does a huge query against one of the other DBs, I see full CPU usage on the machine, and connections from my app time out. Why does this happen? I would have thought the many cores and harddisks would somehow (together with cleverly written DB server) be able to keep at least some of the resources free for other apps? I'm pretty sure he doesn't use multiple connections for his query. What can I do to prevent this?

  Read the article

• Is paravirtualization evil?

  - by Daniel

  I have an VMWare ESX Server v3.5 with a few virtualized Debian Lenny VMs (kernel 2.6.22 with vmi) running Apache Tomcat 5.5. I enabled paravirtualization, and Disk IO increased from about 240MB/s to 380MB/s, making me a happy admin. The problem now is that my apache tomcat becomes deadlocked during startup, running with 200% CPU (I have 2 CPUS assigned to the VM), and don't know how to get both: A stable system and a fast system. I somewhere heared that paravirtualization is legacy anyway and won't be available on newer ESX servers. Is there a replacement for this seemingly performance-improving option, or is it discontinued becauses it is just unstable? What is the state of paravirtualization? Should I ignore it completely? Thanks for all answers in advance.

  Read the article

• Printing documents on HP printer very slow

  - by maxim

  I have a strange problem with HP drivers. I have configured a HP printer 2025dn with LAN connection, on 3 pc, using the cd rom of HP driver. All works well, but sometimes for certain documents the time for printing is very slow and long. I observe during this situation, in task manager, a process called rundll32.exe loads CPU at 100%. If I kill that process the printer starts printing fast the document in the queue. I wondering the reason of this strange behaviour.

  Read the article

• Xen Disk Performence Issues

  - by user98651

  I'm currently using Xen PV on CentOS 5 with my domU's as flat files running on a hardware RAID controlled (write cache enabled) formatted with XFS. On the dom0 I can get about 500MB/s in a 2GB dd write from /dev/zero however on the domU's I'm lucky if I get 10MB/s (it is usually around half that). I've tried changing the disk scheduling to NOOP on the domU's, changed some mount parameters and tweaked the performance allocations of both the dom0 (prioritize CPU) and domU's (increase RAM and VCPU allocations). None of these steps have produced any noticeable change in performance. My instinct here is that it is not a hardware problem, due to the solid performance of the dom0. Any ideas on what might be causing this problem? I'm considering moving to LVM based domU's.

  Read the article

• HAProxy being killed with more that 54,000 connections

  - by Olly

  I am trying to run HAProxy (1.4.8) on a EC2 machine running Ubuntu 10.04. I need HAProxy to be able to handle many thousands of long-running persistent connections (websockets). With the current setup HAProxy gets killed at around 54,300 connections (roughly). If I am running HAProxy in the foreground, the only output is "Killed". Am I right in thinking this is the Kernel killing the process? Is this because it is out of resources? Can I increase the resources? The CPU and memory consumption are low with 50,000 connections, so I don't suspect either of these. How can I prevent this from happening?

  Read the article

• Linux IO scheduler on databases with RAID

  - by Raghu

  Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

  Read the article

• How can I automate restarting a vmware vm

  - by Stu

  I have a vm that does nothing but run magic jack. Magic jack doesn't run perfectly in a vm. It works great for days then randomly the vm reboots. except it doesn't come up clean. It gets to the windows splash screen and hangs spinning the cpu. I don't care how I solve the problem (although not crashing in the first place would be ideal) but I just need the vm to reboot cleanly when it does crash. Is there a windows registry setting I can say "on crash, reboot" or something like that?

  Read the article

• Why does Oracle SQL Developer take so long to open?

  - by oscilatingcretin

  I think anyone who's used Oracle SQL Developer will agree that it's painfully slow on the load. My research has lead me to a solution that seems to have helped a little, and that's telling OSQLD not to check for updates on startup. However, it still takes several minutes to open. What could OSQLD possibly be doing during load time? Is there any way get it to open right away? Edit: Adding potentially relevant system specs: CPU: Intel i5-2520M 2.5 ghz Windows 7 32-bit RAM: 4 gb

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• video card for only watching videos

  - by Nothing 2 Lose

  I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• How do I log file system read/writes by filename in Linux?

  - by Casey

  I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• Mobile Intel 965 vs 4 Series chipset speed differences

  - by graham.reeds

  A client of ours is having a problem panning on a mapping application that we write on their panasonic toughbooks (CF-19's). One of their toughbooks the panning is fairly smooth while on the other it is really slow. Doesn't help that they have all the settings turned up, but I would of thought any reasonably new graphics card (even shared memory) would have more than adequate graphic speed. I am pretty sure that the graphic adapter is to blame, but I can't find anything out about either chipset (level of acceleration, non-problems, etc). All I get is the intel data sheets. The faster panning one is on the Mobile Intel 4 Series Express Chipset while the slower is on the Mobile Intel 965 Express Chipset. Is this expected? Does it sound like a driver problem? They both have the same amount of ram and same cpu.

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• What is a proper MySql replication configuration for frequent db updates and rare selects?

  - by serg555

  We currently have 1 master db on its own server and slave db on app server. App executes very frequent but light updates (like increasing counters), and occasional (once in a few minutes) heavy selects (which is the most important part of the app). When app was connected only to master db there were no performance issues. With slave db introduction CPU load avg on app server increased to about 6-10 during that heavy select period (from 3-4 as before). When server doesn't run those frequent updates it seems like performance for selects stays within the limits. So I have a feeling that those updates is what is causing the performance drop (also these frequent updates are not critical so if slave db doesn't have them in sync with master for some time it would be ok). What would be a good db replication setup for such kind of app? What are the replication parameters we could tweak? Thanks.

  Read the article

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• How would I measure the amount of RAM needed per Glassfish domain? [closed]

  - by oligofren

  Possible Duplicate: Can you help me with my capacity planning? In our test environment we have a lot of apps spread out over a few servers and Glassfish domains. To make versioning easier I would have liked to have one Glassfish domain per customer per app (kind of like a heavyweight version of lots of jetty instances). But I have heard that Glassfish is kind of heavy on the resources, and so I would need to measure approximately how many instances would fit in the available RAM. These are low-traffic/low load testing servers, so CPU is not really an issue, though RAM might be. How would I get an approximate measure of how much RAM is needed? This is one Glassfish 3 instance with one heavy EAR application deployed. top? jvmstats? ??

  Read the article

• Computer only booting after POWER ON/OFF 10 times or more?

  - by Jan Gressmann

  Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

  Read the article

• Monitoring the wall time of a process on windows?

  - by Sean Madden

  Windows Task Manager has the ability to show the current CPU time of any given running process on windows, is there any way (not necessarily through Task Manager) to get the current wall time of a process? An example, let's say I have a script that reliably runs for about 45 minutes. Without adding a progress bar to the script, is there any way to figure out for how long it has been running? The math behind this seems pretty straight forward; WallTime = CurrentWallTime - WallTimeProcessStarted. Likewise, since the math is so simple, is there anyway to get the time that a process was started at?

  Read the article

• MSSQL, ASP.NET, IIS. SQL Server perfmon log question

  - by Datapimp23

  Hi, I'm testing a web application that runs on a hypervisor. The database server and the webserver are seperate vm's that run on the same hypervisor. We did some tests and the functions perform ok. I want you guys to look at a screenshot of a permon log of the sql 2005 server on the busiest moment. The webserver perfmon log looks fine and it's obvious that we have enough resources to present the page in a timely fashion. http://d.imagehost.org/view/0919/heavyload http://d.imagehost.org/0253/heavyloadz.jpg Zoomed out The striped blue line maxing out is the Processor que length (scale 100,0) The green line at around value 30 is Available MBytes (scale 0,01) The rest of the counters are visible on the screenshot. The sql server machine has no CPU limitations on the hypervisor resources and has 5 vcpu's and 5 GB RAM. Can someone help me to interpret this log. Thanks

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >