Search Results

Search found 79916 results on 3197 pages for 'windows look and feel'.

Page 155/3197 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • Backing up Windows machines using rsync over SSH

    - by user38118
    We have a number of Windows XP / Windows 7 machines which need to be backed up nightly to a Linux file server. We would like to do it with rsync and rsnapshot as that's what we're familiar with already from the rest of our Linux/FreeBSD machines. We tried DeltaCopy, but DeltaCopy proved to be troublesome- lots of problems getting it to log in via SSH automatically, and the Windows Scheduled Tasks seem to fail often. Is there a reliable way/application which can back up Windows machines via rsync to a r

    Read the article

  • Windows 7 immediately disconnects a USB drive

    - by Daniel Saner
    I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

    Read the article

  • Does Windows 7 deleted files generated during hibernation?

    - by Koffeehaus
    Somebody was using my Windows 7 and she hibernated it instead of shutting down. Later, I booted up Ubuntu and moved about 2GB worth of files from the Ubuntu partition to the Windows partition. After booting up Windows (from hibernation), I couldn't find any of the files. Then I restarted the PC, and the files showed for a second or two and then disappeared. Did Windows delete all the files I put on it while it was hibernating?

    Read the article

  • Windows 7 re-installation

    - by GTX OC
    I need to reinstall Windows 7 but the problem is that all my partitions are set to Dynamic disk type.Windows cannot install on Dynamic disc type partitions.During the installation process there is an option to format the drive but I cannot change the disc type.Is there any way to convert the partitions back into primary so that I can re-install Windows?I am a complete fool.I don't even know why I converted the partition in which Windows was installed into dynamic type. I have a 1TB HDD having 4 partitions and all of them are dynamic. Thanks in advance.

    Read the article

  • Multiple Skype Accounts in Windows 8

    - by Liath
    We use Skype at work and I use Skype at home, however I have two accounts so clients can't call me at home and I'm not distracted when I'm at work. I've just upgraded my laptop from Windows 7 to Windows 8, in 7 I'd sign into one then sign out. With Windows 8 you have to tie it to your Windows Account. How can I maintain this distinction and still use my laptop for Skype calls when I work at home?

    Read the article

  • How does one replicate the "windows XP style" theme on Windows 7?

    - by luckcity
    I have gone ahead and selected the Windows Classic theme in WIN7's "Window Color and Appearance" to turn off Aero. I'm looking to replicate the "windows XP style" theme due to some screen recognition software that was built on an XP machine. Is it possible to edit/import the "windows XP style" theme file and use it in WIN7? I am mostly looking to get the colors/fonts similar. Windows/buttons would be good too.

    Read the article

  • Top 31 Favorite Features in Windows Server 2012

    - by KeithMayer
    Over the past month, my fellow IT Pro Technical Evangelists and I have authored a series of articles about our Top 31 Favorite Features in Windows Server 2012.  Now that our series is complete, I’m providing a clickable index below of all of the articles in the series for your convenience, just in case you perhaps missed any of them when they were first released.  Hope you enjoy our Favorite Features in Windows Server 2012! Top 31 Favorite Features in Windows Server 2012 The Cloud OS Platform by Kevin Remde Server Manager in Windows Server 2012 by Brian Lewis Feel the Power of PowerShell 3.0 by Matt Hester Live Migrate Your VMS in One Line of PowerShell by Keith Mayer Windows Server 2012 and Hyper-V Replica by Kevin Remde Right-size IT Budgets with “Storage Spaces” by Keith Mayer Yes, there is an “I” in Team – the NIC Team! by Kevin Remde Hyper-V Network Virtualization by Keith Mayer Get Happy over the FREE Hyper-V Server 2012 by Matt Hester Simplified BranchCache in Windows Server 2012 by Brian Lewis Getting Snippy with PowerShell 3.0 by Matt Hester How to Get Unbelievable Data Deduplication Results by Chris Henley of Veeam Simplified VDI Configuration and Management by Brian Lewis Taming the New Task Manager by Keith Mayer Improve File Server Resiliency with ReFS by Keith Mayer Simplified DirectAccess by Sumeeth Evans SMB 3.0 – The Glue in Windows Server 2012 by Matt Hester Continuously Available File Shares by Steven Murawski of Edgenet Server Core - Improved Taste, Less Filling, More Uptime by Keith Mayer Extend Your Hyper-V Virtual Switch by Kevin Remde To NIC or to Not NIC Hardware Requirements by Brian Lewis Simplified Licensing and Server Versions by Kevin Remde I Think, Therefore IPAM! by Kevin Remde Windows Server 2012 and the RSATs by Kevin Remde Top 3 New Tricks in the Active Directory Admin Center by Keith Mayer Dynamic Access Control by Brian Lewis Get the Gremlin out of Your Active Directory Virtualized Infrastructure by Matt Hester Scoping out the New DHCP Failover by Keith Mayer Gone in 8 Seconds – The New CHKDSK by Matt Hester New Remote Desktop Services (RDS) by Brian Lewis No Better Time Than Now to Choose Hyper-V by Matt Hester What’s Next? Keep Learning! Want to learn more about Windows Server 2012 and Hyper-V Server 2012?  Want to prepare for certification on Windows Server 2012? Do It: Join our Windows Server 2012 “Early Experts” Challenge online peer study group for FREE at http://earlyexperts.net. You’ll get FREE access to video-based lectures, structured study materials and hands-on lab activities to help you study and prepare!  Along the way, you’ll be part of an IT Pro community of over 1,000+ IT Pros that are all helping each other learn Windows Server 2012! What are Your Favorite Features? Do you have a Favorite Feature in Windows Server 2012 that we missed in our list above?  Feel free to share your favorites in the comments below! Keith Build Your Lab! Download Windows Server 2012 Don’t Have a Lab? Build Your Lab in the Cloud with Windows Azure Virtual Machines Want to Get Certified? Join our Windows Server 2012 "Early Experts" Study Group

    Read the article

  • Remote Desktop to Server 2008R2 fails from one particular Win7 client

    - by Jesse McGrew
    I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

    Read the article

  • Errors when attempting to update source files, Server 2012R2 (errors 80073701 and 14081)

    - by jeremy
    I have a Windows Server 2012R2 machine that I installed with Server Core, and then decided that I wanted to switch to GUI. I'll make the long story short: I ran windows updates, and now the source files are older/out of sync with the operating system, and I need to update the source files. Here are a couple of articles that outline how this is supposed to work: http://blog.coretech.dk/kaj/why-i-cant-convert-my-windows-server-2012-r2-core-to-gui/ http://blogs.technet.com/b/joscon/archive/2012/11/14/how-to-update-local-source-media-to-add-roles-and-features.aspx I have followed these instructions, but the updates are not successfully updating the source. I get errors like: "An error occurred - Package_for_KB29671203 Error: 0x80073701, Error: 14081, The referenced assembly could not be found." or "add-windowspackage failed. error code = 0x80073701, add-windowspackage: the referenced assembly could not be found" I've extensively searched for help on those error codes related to Server 2012 and windows updates, but my google-fu is failing me. I am using windows update packages found in c:\Windows\SoftwareDistribution\Download How can I get these updates to bring my source files up to current? Thanks!

    Read the article

  • Printer deployment via Group Policy not working on a single system

    - by Aron Rotteveel
    One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

    Read the article

  • Remote Desktop to Server 2008 fails from one particular Win7 client

    - by Jesse McGrew
    I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

    Read the article

  • The Network folder specified is currently mapped using a different user name and password

    - by Frank Thornton
    I have a NAS device, it has 3 shares. On one computer I have access to all 3 of the shares. On another computer I keep getting this error when try and add a 2nd one. The Network folder specified is currently mapped using a different user name and password [...] That is the message I keep getting. What causes that? EDIT: Every share has it's own username and password. EDIT: NET USE on the one running 3 from the same NAS device New connections will be remembered. Status Local Remote Network ------------------------------------------------------------------------------- OK T: \\192.168.2.5\SHARE1 Microsoft Windows Network OK X: \\Nas-1dsho-abc\SHARE2 Microsoft Windows Network Disconnected Y: \\192.168.2.9\backups Microsoft Windows Network OK Z: \\Nas-1dsho-abc\cbackups Microsoft Windows Network The command completed successfully. NET USE on the other: New connections will be remembered. Status Local Remote Network ------------------------------------------------------------------------------- OK Y: \\192.168.2.5\SHARE1 Microsoft Windows Network Unavailable Z: \\192.168.2.5\SHARE2 Microsoft Windows Network The command completed successfully.

    Read the article

  • Unable to access network resources through VPN

    - by fbueckert
    I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

    Read the article

  • Explorer.exe keeps crashing during log in

    - by asif
    I have got a weird problem. My windows 7 has two user accounts (both are administrator). I can log in to one account and do all sort of work. But whenever I try to log in to other account, it shows a blank screen and a messagebox pops up with "windows explorer has stopped working". The options available are: Close the program Check online for a solution and close the program The problem signature is as follows: Problem Event Name: InPageError Error Status Code: c000009c Faulting Media Type: 00000003 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If I press alt+ctrl+del and then select start task manager, it also crashes. I can not run any program using runas command (from good profile) too. The task manager and runas programs all show same problem signature. I read the similar question and followed all the steps, but no luck. Later, I viewed the event log and found that, explorer.exe could not access a file. I checked the location but the file is there. The actual message is: Windows cannot access the file C:\Users\testuser\AppData\Local\Microsoft\Windows\Caches\{AFBF9F1A-8EE8-4C77-AF34-C647E37CA0D9}.1.ver0x0000000000000020.db for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Windows Explorer because of this error. The question is, how can I resolve this issue? Should I just delete the file or replace it with another one to stop explorer.exe from crashing? offtopic: What is the content of this file and why it is necessary?

    Read the article

  • User authentication -- username mismatch in IIS in ASP.NET application

    - by Cory Larson
    Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

    Read the article

  • Domain Trust 2008 to 2003

    - by nick3216
    I'm having trouble setting up the trust relationship between a Windows Server 2003 and a Windows Server 2008 AD. Domain a is Windows Server 2003 Forest functional level. Domain b is a Windows Server 2008 Forest functional level. I can set up the incoming side of the trust relationship on domain "a" so that it trusts domain "b". Try as I might on domain "b" I can't set up the outgoing side of the trust relationship to domain "a". The GUI interface gives an unhelpful 'The request is not supported'. I'm not sure netdom is being more or less helpful as it refers me to FilterSIDs netdom trust /add b /uo:b\admin /po:* /d:a /ud:a\admin /pd:* /oneside:trusting To improve the security of this external trust, security identifier (SID) filtering is enabled, however, if users have been migrated to the trusted domain and their SID histories have been preserved, you may choose to turn off this feature. For more information about SID filtering and how to turn it off, see the help for netdom trust /FilterSids or see Help and Support. The request is not supported. The command failed to complete succesfully. I say 'less helpful' because Windows Server 2008 doesn't support the /FilterSIDs option. How can we force creation of this trust? Edit: Just to clarify I've checked that the [Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options] "Network access: Allow anonymous SID/Name translation” is enabled on both sides of the trust as per http://social.technet.microsoft.com/Forums/en/winserverDS/thread/cc61fc25-3569-4413-bbfd-92390eb31118

    Read the article

  • How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

    - by Gizmo
    I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

    Read the article

  • Printer deployment via Group Policy not working on a single system

    - by Aron Rotteveel
    One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

    Read the article

  • Why am I getting kicked from an IRC channel in one OS (xp) but not in the other OS (7)? [closed]

    - by moshe
    I got kicked from an IRC channel. I have Windows XP and now if I'm trying to get into this specific channel, I get inside but I get immediately kicked out. I can come in again, and again get kicked out. It seems this is done automatically. Now I have also installed, on another hard drive in the same computer Windows 7. On Windows7 I can get into this same channel and never kicked out! It's the same computer, but different operating system(separate Hard Drives). How can it be? Is the KICK command bias towards the operating system I got KICKed in? Please explain to me how this thing is happening. PS: I forgot to mention that it doesn't matter if i change my IP or my nickname, I continue to kicked out from this channel. Again, in windows 7 I can get in without a problem. another thing that is good to mention is that i got kicked out when i was using windows XP, and not windows 7. i think that it could happened also with windows 2000 and vista, so i dont bother the OS itself, but why it's acting differently with a different OS?

    Read the article

  • SQLAuthority News – SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience

    - by pinaldave
    I recently attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever This year the summit was at its best. Instead of writing about my usual routine or the event, I am going to write about the interesting things I did and how I felt about it! Best Summit Ever Trip to Seattle! This was my second trip to Seattle this year and the journey is always long. Here is the travel stats on how long it takes to get to Seattle: 24 hours official air time 36 hours total travel time (connection waits and airport commute) Every time I travel to USA I gain a day and when I travel back to home, I lose a day. However, the total traveling time is around 3 days. The journey is long and very exhausting. However, it is all worth it when you’re attending an event like SQLPASS. Here are few things I carry when I travel for a long journey: Dry Snack packs – I like to have some good Indian Dry Snacks along with me in my backpack so I can have my own snack when I want Amazon Kindle – Loaded with 80+ books A physical book – This is usually a very easy to read book I do not watch movies on the plane and usually spend my time reading something quick and easy. If I can go to sleep, I go for it. I prefer to not to spend time in conversation with the guy sitting next to me because usually I end up listening to their biography, which I cannot blog about. Sheraton Seattle SQLPASS In any case, I love to go to Seattle as the city is great and has everything a brilliant metropolis has to offer. The new Light Train is extremely convenient, and I can take it directly from the airport to the city center. My hotel, the Sheraton, was only few meters (in the USA people count in blocks – 3 blocks) away from the train station. This time I saved USD 40 each round trip due to the Light Train. Sessions I attended! Well, I really wanted to attend most of the sessions but there was great dilemma of which ones to choose. There were many, many sessions to be attended and at any given time there was more than one good session being presented. I had decided to attend sessions in area performance tuning and I attended quite a few sessions this year, compared to what I was able to do last year. Here are few names of the speakers whose sessions I attended (please note, following great speakers are not listed in any order. I loved them and I enjoyed their sessions): Conor Cunningham Rushabh Mehta Buck Woody Brent Ozar Jonathan Kehayias Chris Leonard Bob Ward Grant Fritchey I had great fun attending their sessions. The sessions were meaningful and enlightening. It is hard to rate any session but I have found that the insights learned in Conor Cunningham’s sessions are the highlight of the PASS Summit. Rushabh Mehta at Keynote SQLPASS   Bucky Woody and Brent Ozar I always like the sessions where the speaker is much closer to the audience and has real world experience. I think speakers who have worked in the real world deliver the best content and most useful information. Sessions I did not like! Indeed there were few sessions I did not like it and I am not going to name them here. However, there were strong reasons I did not like their sessions, and here is why: Sessions were all theory and had no real world connections. All technical questions ended with confusing answers (lots of “I will get back to you on it,” “it depends,” “let us take this offline” and many more…) “I am God” kind of attitude in the speakers For example, I attended a session of one very well known speaker who is a specialist for one particular area. I was bit late for the session and was surprised to see that in a room that could hold 350 people there were only 30 attendees. After sitting there for 15 minutes, I realized why lots of people left. Very soon I found I preferred to stare out the window instead of listening to that particular speaker. One on One Talk! Many times people ask me what I really like about PASS. I always say the experience of meeting SQL legends and spending time with them one on one and LEARNING! Here is the quick list of the people I met during this event and spent more than 30 minutes with each of them talking about various subjects: Pinal Dave and Brad Shulz Pinal Dave and Rushabh Mehta Michael Coles and Pinal Dave Rushabh Mehta – It is always pleasure to meet with him. He is a man with lots of energy and a passion for community. He recently told me that he really wanted to turn PASS into resource for learning for every SQL Server Developer and Administrator in the world. I had great in-depth discussion regarding how a single person can contribute to a community. Michael Coles – I consider him my best friend. It is always fun to meet him. He is funny and very knowledgeable. I think there are very few people who are as expert as he is in encryption and spatial databases. Worth meeting him every single time. Glenn Berry – A real friend of everybody. He is very a simple person and very true to his heart. I think there is not a single person in whole community who does not like him. He is a friends of all and everybody likes him very much. I once again had time to sit with him and learn so much from him. As he is known as Dr. DMV, I can be his nurse in the area of DMV. Brad Schulz – I always wanted to meet him but never got chance until today. I had great time meeting him in person and we have spent considerable amount of time together discussing various T-SQL tricks and tips. I do not know where he comes up with all the different ideas but I enjoy reading his blog and sharing his wisdom with me. Jonathan Kehayias – He is drill sergeant in US army. If you get the impression that he is a giant with very strong personality – you are wrong. He is very kind and soft spoken DBA with strong performance tuning skills. I asked him how he has kept his two jobs separate and I got very good answer – just work hard and have passion for what you do. I attended his sessions and his presentation style is very unique.  I feel like he is speaking in a language I understand. Louis Davidson – I had never had a chance to sit with him and talk about technology before. He has so much wisdom and he is very kind. During the dinner, I had talked with him for long time and without hesitation he started to draw a schema for me on the menu. It was a wonderful experience to learn from a master at the dinner table. He explained to me the real and practical differences between third normal form and forth normal form. Honestly I did not know earlier, but now I do. Erland Sommarskog – This man needs no introduction, he is very well known and very clear in conveying his ideas. I learned a lot from him during the course of year. Every time I meet him, I learn something new and this time was no exception. Joe Webb – Joey is all about community and people, we had interesting conversation about community, MVP and how one can be helpful to community without losing passion for long time. It is always pleasant to talk to him and of course, I had fun time. Ross Mistry – I call him my brother many times because he indeed looks like my cousin. He provided me lots of insight of how one can write book and how he keeps his books simple to appeal to all the readers. A wonderful person and great friend. Ola Hallgren - I did not know he was coming to the summit. I had great time meeting him and had a wonderful conversation with him regarding his scripts and future community activities. Blythe Morrow – She used to be integrated part of SQL Server Community and PASS HQ. It was wonderful to meet her again and re-connect. She is wonderful person and I had a great time talking to her. Solid Quality Mentors – It is difficult to decide who to mention here. Instead of writing all the names, I am going to include a photo of our meeting. I had great fun meeting various members of our global branches. This year I was sitting with my Spanish speaking friends and had great fun as Javier Loria from Solid Quality translated lots of things for me. Party, Party and Parties Every evening there were various parties. I did attend almost all of them. Every party had different theme but the goal of all the parties the same – networking. Here are the few parties where I had lots of fun: Dell Reception Party Exhibitor Party Solid Quality Fun Party Red Gate Friends Party MVP Dinner Microsoft Party MVP Dinner Quest Party Gameworks PASS Party Volunteer Party at Garage Solid Quality Mentors (10 Members out of 120) They were all great networking opportunities and lots of fun. I really had great time meeting people at the various parties. There were few people everywhere – well, I will say I am among them – who hopped parties. NDA – Not Decided Agenda During the event there were few meetings marked “NDA.” Someone asked me “why are these things NDA?”  My response was simple: because they are not sure themselves. NDA stands for Not Decided Agenda. Toys, Giveaways and Luggage I admit, I was like child in Gameworks and was playing to win soft toys. I was doing it for my daughter. I must thank all of the people who gave me their cards to try my luck. I won 4 soft-toys for my daughter and it was fun. Also, thanks to Angel who did a final toy swap with me to get the desired toy for my daughter. I also collected ducks from Idera, as my daughter really loves them. Solid Quality Booth Each of the exhibitors was giving away something and I got so much stuff that my luggage got quite a bit bigger when I returned. Best Exhibitor Idera had SQLDoctor (a real magician and fun guy) to promote their new tool SQLDoctor. I really had a great time participating in the magic myself. At one point, the magician made my watch disappear.  I have seen better magic before, but this time it caught me unexpectedly and I was taken by surprise. I won many ducks again. The Common Question I heard the following common questions: I have seen you somewhere – who are you? – I am Pinal Dave. I did not know that Pinal is your first name and Dave is your last name, how do you pronounce your last name again? – Da-way How old are you? – I am as old as I can be. Are you an Indian because you look like one? – I did not answer this one. Where are you from? This question was usually asked after looking at my badge which says India. So did you really fly from India? – Yes, because I have seasickness so I do not prefer the sea journey. How long was the journey? – 24/36/12 (air travel time/total travel time/time zone difference) Why do you write on SQLAuthority.com? – Because I want to. I remember your daughter looks like you. – Is this even a question? Of course, she is daddy’s little girl. There were so many other questions, I will have to write another blog post about it. SQLPASS Again, Best Summit Ever! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology Tagged: SQLPASS

    Read the article

  • [OT] : Windows Activation, en masse

    - by AaronBertrand
    This weekend I discovered a minor issue in one of my virtual environments. I had built out 100 VMs based on a Hyper-V template, but I forgot to activate the original source before creating the template, so all of the machines were suddenly out of compliance. While easy enough on a one- or two-machine basis to just log into the machine and activate manually, there was no way I was even going to dream of repeating that process on 100 machines. My First Reaction : PowerShell Whenever I do anything with...(read more)

    Read the article

  • [Windows 8] Update TextBox’s binding on TextChanged

    - by Benjamin Roux
    Since UpdateSourceTrigger is not available in WinRT we cannot update the text’s binding of a TextBox at will (or at least not easily) especially when using MVVM (I surely don’t want to write behind-code to do that in each of my apps !). Since this kind of demand is frequent (for example to disable of button if the TextBox is empty) I decided to create some attached properties to to simulate this missing behavior. namespace Indeed.Controls { public static class TextBoxEx { public static string GetRealTimeText(TextBox obj) { return (string)obj.GetValue(RealTimeTextProperty); } public static void SetRealTimeText(TextBox obj, string value) { obj.SetValue(RealTimeTextProperty, value); } public static readonly DependencyProperty RealTimeTextProperty = DependencyProperty.RegisterAttached("RealTimeText", typeof(string), typeof(TextBoxEx), null); public static bool GetIsAutoUpdate(TextBox obj) { return (bool)obj.GetValue(IsAutoUpdateProperty); } public static void SetIsAutoUpdate(TextBox obj, bool value) { obj.SetValue(IsAutoUpdateProperty, value); } public static readonly DependencyProperty IsAutoUpdateProperty = DependencyProperty.RegisterAttached("IsAutoUpdate", typeof(bool), typeof(TextBoxEx), new PropertyMetadata(false, OnIsAutoUpdateChanged)); private static void OnIsAutoUpdateChanged(DependencyObject sender, DependencyPropertyChangedEventArgs e) { var value = (bool)e.NewValue; var textbox = (TextBox)sender; if (value) { Observable.FromEventPattern<TextChangedEventHandler, TextChangedEventArgs>( o => textbox.TextChanged += o, o => textbox.TextChanged -= o) .Do(_ => textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text)) .Subscribe(); } } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is composed of two attached properties. The first one “RealTimeText” reflects the text in real time (updated after each TextChanged event). The second one is only used to enable the functionality. To subscribe to the TextChanged event I used Reactive Extensions (Rx-Metro package in Nuget). If you’re not familiar with this framework just replace the code with a simple: textbox.TextChanged += textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use these attached properties, it’s fairly simple <TextBox Text="{Binding Path=MyProperty, Mode=TwoWay}" ic:TextBoxEx.IsAutoUpdate="True" ic:TextBoxEx.RealTimeText="{Binding Path=MyProperty, Mode=TwoWay}" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Just make sure to create a binding (in TwoWay) for both Text and RealTimeText. Hope this helps !

    Read the article

  • ASP.NET MVC 3 Hosting :: ASP.NET MVC 3 First Look

    - by mbridge
    MVC 3 View Enhancements MVC 3 introduces two improvements to the MVC view engine: - Ability to select the view engine to use. MVC 3 allows you to select from any of your  installed view engines from Visual Studio by selecting Add > View (including the newly introduced ASP.NET “Razor” engine”): - Support for the next ASP.NET “Razor” syntax. The newly previewed Razor syntax is a concise lightweight syntax. MVC 3 Control Enhancements - Global Filters: ASP.NET MVC 3  allows you to specify that a filter which applies globally to all Controllers within an app by adding it to the GlobalFilters collection.  The RegisterGlobalFilters() method is now included in the default Global.asax class template and so provides a convenient place to do this since is will then be called by the Application_Start() method: void RegisterGlobalFilters(GlobalFilterCollection filters) { filters.Add(new HandleLoggingAttribute()); filters.Add(new HandleErrorAttribute()); } void Application_Start() { RegisterGlobalFilters (GlobalFilters.Filters); } - Dynamic ViewModel Property : MVC 3 augments the ViewData API with a new “ViewModel” property on Controller which is of type “dynamic” – and therefore enables you to use the new dynamic language support in C# and VB pass ViewData items using a cleaner syntax than the current dictionary API. Public ActionResult Index() { ViewModel.Message = "Hello World"; return View(); } - New ActionResult Types : MVC 3 includes three new ActionResult types and helper methods: 1. HttpNotFoundResult – indicates that a resource which was requested by the current URL was not found. HttpNotFoundResult will return a 404 HTTP status code to the calling client. 2. PermanentRedirects – The HttpRedirectResult class contains a new Boolean “Permanent” property which is used to indicate that a permanent redirect should be done. Permanent redirects use a HTTP 301 status code.  The Controller class  includes three new methods for performing these permanent redirects: RedirectPermanent(), RedirectToRoutePermanent(), andRedirectToActionPermanent(). All  of these methods will return an instance of the HttpRedirectResult object with the Permanent property set to true. 3. HttpStatusCodeResult – used for setting an explicit response status code and its associated description. MVC 3 AJAX and JavaScript Enhancements MVC 3 ships with built-in JSON binding support which enables action methods to receive JSON-encoded data and then model-bind it to action method parameters. For example a jQuery client-side JavaScript could define a “save” event handler which will be invoked when the save button is clicked on the client. The code in the event handler then constructs a client-side JavaScript “product” object with 3 fields with their values retrieved from HTML input elements. Finally, it uses jQuery’s .ajax() method to POST a JSON based request which contains the product to a /theStore/UpdateProduct URL on the server: $('#save').click(function () { var product = { ProdName: $('#Name').val() Price: $('#Price').val(), } $.ajax({ url: '/theStore/UpdateProduct', type: "POST"; data: JSON.stringify(widget), datatype: "json", contentType: "application/json; charset=utf-8", success: function () { $('#message').html('Saved').fadeIn(), }, error: function () { $('#message').html('Error').fadeIn(), } }); return false; }); MVC will allow you to implement the /theStore/UpdateProduct URL on the server by using an action method as below. The UpdateProduct() action method will accept a strongly-typed Product object for a parameter. MVC 3 can now automatically bind an incoming JSON post value to the .NET Product type on the server without having to write any custom binding. [HttpPost] public ActionResult UpdateProduct(Product product) { // save logic here return null } MVC 3 Model Validation Enhancements MVC 3 builds on the MVC 2 model validation improvements by adding   support for several of the new validation features within the System.ComponentModel.DataAnnotations namespace in .NET 4.0: - Support for the new DataAnnotations metadata attributes like DisplayAttribute. - Support for the improvements made to the ValidationAttribute class which now supports a new IsValid overload that provides more info on  the current validation context, like what object is being validated. - Support for the new IValidatableObject interface which enables you to perform model-level validation and also provide validation error messages which are specific to the state of the overall model. MVC 3 Dependency Injection Enhancements MVC 3 includes better support for applying Dependency Injection (DI) and also integrating with Dependency Injection/IOC containers. Currently MVC 3 Preview 1 has support for DI in the below places: - Controllers (registering & injecting controller factories and injecting controllers) - Views (registering & injecting view engines, also for injecting dependencies into view pages) - Action Filters (locating and  injecting filters) And this is another important blog about Microsoft .NET and technology: - Windows 2008 Blog - SharePoint 2010 Blog - .NET 4 Blog And you can visit here if you're looking for ASP.NET MVC 3 hosting

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >