Search Results

Search found 19483 results on 780 pages for 'load average'.

Page 157/780 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• vhost.conf with plesk makes infinite loop

  - by user134598

  So I'm trying to make rewrite rules for my just migrated site and now we're using PLESK (unfortunately in my opinion). So, in order to make those rewrites I'm using the vhost.conf file in mydomain/conf folderm and I execute: /usr/local/psa/admin/sbin/websrvmng -u --vhost-name=mydomain.org so that includes my file into the httpd configuration. However, no matter what I write in my vhost.conf file, it will make my site go in an infinite loop whenever I try to load an URL that's not just the domain. Example: mydomain.org Works just fine. mydomain.org/event/nameofevent Will try endlessly to load and eventually my browser will detect that infinite loop. I though I was writing something incorrectly in my vhost.conf file but I even tried it with the file empty (not a single line). It will still try to load endlessly. Anybody can hint me if I'm skipping a step before (like any activation that should be done beorehand or something). Thanks in advance.

  Read the article

• Oracle Traffic Director – download and check out new cool features in 11.1.1.7.0 by Frances Zhao

  - by JuergenKress

  As Oracle's strategic layer-7 software load balancer product, Oracle Traffic Direct is fast, reliable, secure, easy-to-use and scalable; that you can deploy as the reliable entry point for all TCP, HTTP and HTTPS traffic to application servers and web servers in your network. The latest release Oracle Traffic Director 11.1.1.7.0 is available for ExaLogic and Database Appliance! For download and details please visit the Traffic Director OTN website. It this release, we have introduced some major new functionality and improvements. Web application firewall. Oracle Traffic Director supports web application firewalls. A web application firewall (WAF) is a filter or server plugin that applies a set of rules, called rule sets, to an HTTP request. Using a web application firewall, users can inspect traffic and deny requests to protect back-end applications from CSRF vulnerabilities and common attacks such as cross-site scripting. WebSocket Connections. Oracle Traffic Director handles WebSocket connections by default. WebSocket connections are long-lived and allow support for live content, games in real-time, video chatting, and so on. Support for LDAP/T3 Load Balancing. Oracle Traffic Director now supports basic LDAP/T3 load balancing at layer 7, where requests are handled as generic TCP connections for traffic tunneling. It works in full-NAT mode. Please download and try it out. For more information, check out the data sheet and the documentation. For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: traffic director,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Designing web-based plugin systems correctly so they don't waste as many resources?

  - by Xeoncross

  Many CMS systems which rely on third parties for much of their code often build "plugin" or "hooks" systems to make it easy for developers to modify the codebase's actions without editing the core files. This usually means an Observer or Event design pattern. However, when you look at systems like wordpress you see that on every page they load some kind of bootstrap file from each of the plugin's folders to see if that plugin will need to run that request. Its this poor design that causes systems like wordpress to spend many extra MB's of memory loading and parsing unneeded items each page. Are there alternative ways to do this? I'm looking for ideas in building my own. For example, Is there a way to load all this once and then cache the results so that your system knows how to lazy-load plugins? In other words, the system loads a configuration file that specifies all the events that plugin wishes to tie into and then saves it for future requests? If that also performs poorly, then perhaps there is a special file-structure that could be used to make educated guesses about when certain plugins are unneeded to fullfil the request. Any ideas? If anyone wants an example of the "plugin" concept you can find one here.

  Read the article

• Data indexing frameworks fit for large E-Commerce applications

  - by Dabu

  we wrote and still maintain a large E-Commerce application. Our feature list resembles what you would expect from most shops. We'd like to improve some of our features, and now the search/suggestion list functionality (enter some letters, a JScripted suggestion list appears) has caught our eye. Currently, we use http://xapian.org/. It has some drawbacks. Firstly, it's not actually the right solution. It has been created to index documents, not ever-changing data in a granularity that an E-Commerce application would need. Secondly, the load on the database is significant when we reindex all data every night. We'd like a framework that has been designed for indexing database data, which can add to the index easily and without much load, which can supply data changes in the backoffice quickly to the frontend without much load and delay. I'm aware of the fact that Xapian is Open Source and even Free Software, so we could adapt it to our needs if we decided to invest the time and manpower. But taking a quick look around for a solution more suited seems fair, right? Oh, and commercial applications are fine, too. FOSS is not required. Thanks a bunch.

  Read the article

• Can't update scala on Gentoo

  - by xhochy

  As I wanted to test Scala 2.9.2 on my gentoo system I tried updated the package but ended up with this error. I can't figure out where the problem may be: Calculating dependencies ...... done! >>> Verifying ebuild manifests >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Emerging (1 of 1) dev-lang/scala-2.9.2 >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Failed to emerge dev-lang/scala-2.9.2, Log file: >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log' >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 running, 1 failed Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 failed Load avg: 0.23, 0.16, 0.20 * Package: dev-lang/scala-2.9.2 * Repository: gentoo * Maintainer: [email protected] * USE: amd64 elibc_glibc kernel_linux multilib userland_GNU * FEATURES: sandbox [01m[31;06m!!! ERROR: Couldn't find suitable VM. Possible invalid dependency string. Due to jdk-with-com-sun requiring a target of 1.7 but the virtual machines constrained by virtual/jdk-1.6 and/or this package requiring virtual(s) jdk-with-com-sun[0m * Unable to determine VM for building from dependencies: NV_DEPEND: virtual/jdk:1.6 java-virtuals/jdk-with-com-sun !binary? ( dev-java/ant-contrib:0 ) app-arch/xz-utils >=dev-java/java-config-2.1.9-r1 source? ( app-arch/zip ) >=dev-java/ant-core-1.7.0 dev-java/ant-nodeps >=dev-java/javatoolkit-0.3.0-r2 >=dev-lang/python-2.4 * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. !!! When you file a bug report, please include the following information: GENTOO_VM= CLASSPATH="" JAVA_HOME="" JAVACFLAGS="" COMPILER="" and of course, the output of emerge --info * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' * Messages for package dev-lang/scala-2.9.2: * Unable to determine VM for building from dependencies: * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' The following eix output may help: % eix java-virtuals/jdk-with-com-sun [I] java-virtuals/jdk-with-com-sun Available versions: 20111111 {{ELIBC="FreeBSD"}} Installed versions: 20111111(16:08:51 18/04/12)(ELIBC="-FreeBSD") Homepage: http://www.gentoo.org Description: Virtual ebuilds that require internal com.sun classes from a JDK Both virtual jdks 1.6 and 1.7 are installed: % eix virtual/jdk [I] virtual/jdk Available versions: (1.4) ~1.4.2-r1[1] (1.5) 1.5.0 ~1.5.0-r3[1] (1.6) 1.6.0 1.6.0-r1 (1.7) (~)1.7.0 Installed versions: 1.6.0-r1(1.6)(23:22:48 10/11/12) 1.7.0(1.7)(23:21:09 10/11/12) Description: Virtual for JDK [1] "java-overlay" /var/lib/layman/java-overlay

  Read the article

• ASUS K55VM Laptop unexpectedly shuts down

  - by Abhishek Sha

  I've read quite a few questions on SuperUser of people having laptop shutdown problems but mine is different. My laptop specs: Intel Core i7 3610QM (IvyBridge) NVIDIA GT630M 2GB and Intel GMA4000 8GB RAM Windows 7 64 Bit My laptop occasionally shuts down when playing FarCry 3. It's around 5 months old. I've played games like Crysis and it never shuts down unexpectedly. Since I experienced this shut down recently, I decided for GPU-Z to log the temperatures. The final log value at the time of shutdown were thus: GPU Core Clock [MHz] - 797.3 GPU Memory Clock [MHz] - 896.8 GPU Temperature [°C] - 89.0 GPU Load [%] - 99 Memory Controller Load [%] - 36 Video Engine Load [%] - 0 Memory Usage (Dedicated) [MB] - 535 Memory Usage (Dynamic) [MB] - 53 VDDC [V] - 1.0620 My drivers are up-to-date and I didn't encounter any BSODs at the time of shut down. It simply turns off.

  Read the article

• Looking into the jQuery LazyLoad Plugin

  - by nikolaosk

  I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client side of web development.  You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery LazyLoad Plugin.If you want you can have a look at this post, where I describe the JQuery Cycle Plugin.You can find another post of mine talking about the JQuery Carousel Lite Plugin here. Another post of mine regarding the JQuery Image Zoom Plugin can be found here. You can have a look at the JQuery Overlays Plugin here . There are times when when I am asked to create a very long page with lots of images.My first thought is to enable paging on the proposed page. Imagine that we have 60 images on a page. There are performance concerns when we have so many images on a page. Paging can solve that problem if I am allowed to place only 5 images on a page.Sometimes the customer does not like the idea of the paging.Believe it or not some people find the idea of paging not attractive at all.In that case I need a way to only load the initial set of images and as the user scrolls down the page to load the rest.So as someone scrolls down new requests are made to the server and more images are fetched. I can accomplish that with the jQuery LazyLoad Plugin.This is just a plugin that delays loading of images in long web pages.The images that are outside of the viewport (visible part of web page) won't be loaded before the user scrolls to them. Using jQuery LazyLoad Plugin on long web pages containing many large images makes the page load faster. In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like. You can use Visual Studio 2012 Express edition. You can download it here.  You can download this plugin from this link. I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5)<!DOCTYPE html><html lang="en">  <head>    <title>Liverpool Legends</title>    <script type="text/javascript" src="jquery-1.8.3.min.js"></script>        <script type="text/javascript" src="jquery.lazyload.min.js" ></script></head>  <body>    <header>                <h1>Liverpool Legends</h1>    </header>        <div id="main">             <img src="barnes.JPG" width="800" height="1100" /><p />        <img src="dalglish.JPG" width="800" height="1100" /><p />                <img class="LiverpoolImage" src="loader.gif" data-original="fans.JPG" width="1200" height="900" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="lfc.JPG" width="1000" height="700" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="Liverpool-players.JPG" width="1100" height="900" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="steven_gerrard.JPG" width="1110" height="1000" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="robbie.JPG" width="1200" height="1000" /><p />          </div>            <footer>        <p>All Rights Reserved</p>      </footer>                    <script type="text/javascript">                $(function () {                    $("img.LiverpoolImage").lazyload();                });        </script>     </body>  </html> This is a very simple markup. I have  added references to the JQuery library (current version is 1.8.3) and the JQuery LazyLoad Plugin. Firstly, I add two images         <img src="barnes.JPG" width="800" height="1100" /><p />        <img src="dalglish.JPG" width="800" height="1100" /><p />  that will load immediately as soon as the page loads. Then I add the images that will not load unless they become active in the viewport. I have all my img tags pointing the src attribute towards a placeholder image. I’m using a blank 1×1 px grey image,loader.gif.The five images that will load as the user scrolls down the page follow.         <img class="LiverpoolImage" src="loader.gif" data-original="fans.JPG" width="1200" height="900" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="lfc.JPG" width="1000" height="700" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="Liverpool-players.JPG" width="1100" height="900" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="steven_gerrard.JPG" width="1110" height="1000" /><p />        <img class="LiverpoolImage" src="loader.gif" data-original="robbie.JPG" width="1200" height="1000" /><p /> Then we need to rename the image src to point towards the proper image placeholder. The full image URL goes into the data-original attribute.The Javascript code that makes it all happen follows. We need to make a call to the JQuery LazyLoad Plugin. We add the script just before we close the body element.         <script type="text/javascript">                $(function () {                    $("img.LiverpoolImage").lazyload();                });        </script>We can change the code above to incorporate some effects.          <script type="text/javascript">  $("img.LiverpoolImage").lazyload({    effect: "fadeIn"  });    </script> That is all I need to write to achieve lazy loading. It it true that you can do so much with less!!I view my simple page in Internet Explorer 10 and it works as expected. I have tested this simple solution in all major browsers and it works fine. You can test it yourself and see the results in your favorite browser. Hope it helps!!!

  Read the article

• Installing Ubuntu on Asus G75VW (UEFI)

  - by user101653

  You all are my last hope... help! I bought an Asus G75VW from Best Buy. It has the new UEFI BIOS instead of the old style BIOS (1980's) and has Windows 8 preinstalled. I cannot get the G75VW to install Ubuntu 12.10 in EFI mode. I did get Ubuntu to load if I changed the BIOS to CSM and the computer sees and installs Ubuntu in "legacy mode". I attempted boot repair, and Ubuntu will load after 1 minute but as legacy BIOS only. If I changed the BIOS to UEFI "Binary is whitelisted" is displayed and I get a purple screen. My goal... keep my preinstalled Windows 8 on internal drive bay 1 and install Ubuntu 12.10 on internal drive bay 2... and somehow make a choice on which to choose. I am at a loss. I am a software programmer, but I am very bad at understanding BIOS and partitioning. Any ideas? Has anyone done what I want to do. This is a full second day on my "issue"! If I cannot get Ubuntu installed, I'm returning the laptop. And "wait" until these obstacles of UEFI/EFI and properly handled to allow people to load EFI based Ubuntu without a hitch. Thanks, Dave

  Read the article

• Simple multi-seat

  - by Oli

  I've asked about multiseat before. The answer (for 10.04) involved doing it the proper way (eg through gdm, multiple server layouts). The problem was that gdm needs to be patched or reverted to 2.20 for multiseat. It's an ugly hack that, worse than anything, will hold up future updates. As a result, I didn't do anything. I still have a spare video card. I still have the monitor, keyboard and mouse all sitting waiting to jump into action. And I still want to be able to turn that into a simple desktop. My needs don't seem complicated. I have a second video card, a USB hub and anything connected to that USB hub that I want to be dedicated to another X server. I don't need a login screen (I'm happy hard-coding in a auto-login and I'd be happy with the user starting the X server if that's possible). This is so simple in my head that I only need two questions: How can I explicitly start an X server from the command line on an unused video adapter (by passing it whatever configuration I need to)? Can I have this new X session load a desktop environment on load? This seems like something you should be able to write in a little upstart script within 10 minutes. That would be perfect for me as then I'd have a nice start/stop control over the secondary desktop from the main desktop (that I want to leave unscathed!) I'm thinking something as simple as this for the payload: su -u other_user -c "startx -- localhost hardware-information" And use .xinitrc to load openbox or something...

  Read the article

• http server connectivity puzzle

  - by jpmartins

  I have been seeing some strange connection issue in the production environment. The setup has two IBM Http Server's (IHS) and a network IP load-balancer in front of them (round-robin). One instance the system is working fine, the next requests stop arriving at the IHS. Telnet directly to port 80 of the IHS is established sucessfully, but connection to the port 80 through the IP of the load-balancer fails! The puzzle comes next, the network admins say the load-balancer is working fine. When we finally reboot the IHS servers and request start flowing... The situation happened three times the last month and no obvious pattern was found. Any debug ideas?

  Read the article

• Cannot boot from Yumi multiboot USB stick

  - by Amator

  I've just created a multiboot USB stick using Yumi. I tried to start my notebook (Asus K70IO) using it, but all I see is just a black screen with blinking underscore even after waiting for minutes. If during this time I remove the USB stick I get the message: "Operating system load error". How do I properly load my Yumi USB stick and use it? I've tried formatting it using Yumi's checkbox to format the stick in FAT32 too, but it didn't help. Now I tried to use Sardu 2.0.5 and met same problem: black screen and blinkin underscore, if I remove stick I see "Operating system load error" and my OS starts to boot. At the same time if I create bootable USB stick from ISO using UltraISO it boots smoothly.

  Read the article

• Automation Question using VMWare Workstation

  - by James K

  I'm running an experiment that requires me to create 100 instances of Windows XP w/SP3 and saving each VM instance off to a hard drive. I have to annotate the time that the VM load starts (starting my timer when I see the "Setup is preparing...") until the load ends when I see the final desktop after VM loads its drivers. I also have to annotate the host start and stop time. Is there any way this process can be automated? Each load runs me about 16:00 minutes and gets real tiresome after a time. BTW... Exact timing is not necessary, eyeballing as described above is sufficient for my testing needs.

  Read the article

• Ubuntu Chromium bookmark icons blank

  - by Matt Parkins

  Ever so often I load Chromium and it refuses to load my profile. Now that doesn't happen any more but since then it refuses to load the icons for my bookmarks which, if you look at the attached pic, is my only way of identifying which icons do what (other than hover for tool-tip, or actually pressing the icon button). The other possible variable is that the bookmarks are meant to sync with Google sync - I'm not sure if that is a factor. How do I restore the icons to my bookmark bar? Chromium version: Version 20.0.1132.47 Ubuntu 12.04 (144678)

  Read the article

• Mounting ddrescue image after recovery (in over my head)

  - by BorgDomination

  I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

  Read the article

• Session persistence between multiple Rails / Unicorn servers with Redis as session_store on AWS

  - by d_ethier

  I've got 2 nginx EC2 instances pointing to 2 Unicorn EC2 instances in a round robin load balanced configuration. The two nginx instances are being the Elastic Load Balancer. Both Unicorn instances have a Redis session_store configured which is in a master/slave configuration with an Elastic IP attached to the master. I've tried configuring the session stickiness on the load balancer, but sessions are lost on each page refresh. I'm using the redis-store gem for the session_store configuration and redis support. Anyone have any ideas as to why this is not working?

  Read the article

• Places to store basic data

  - by Ella

  I am using PHP. I'm building a fully modular CMS, which is destined for the public. Some people might view this as a framework, but I intend to write a set of extensions for it, extensions that will make it a CMS :P Because it's completely modular I have a problem figuring out how to load extensions. Practically I need to get the list of active extensions, so I can load them inside my base class. I load them by reading some file headers, which contain a "dependency" field. That field decides the order in which I have to instantiate the objects. The problem is that when the CMS starts I have no database interface, because that's an extension too, so I can't store the active extensions list in the database :) You might ask how are extensions activated in the first place. Well - in the administration interface, which is an extension as well (obviously on first install of the CMS there will be some extensions active by default). Could writing that list inside a text file be a solution? The problem is that a lot of hosts are not very nice with scripts when they write files. And since this CMS is public I might have a problem here?

  Read the article

• How to ensure nvidia_current module loads during boot

  - by Aras

  I am running Ubuntu 12.10 on an Asus G75V laptop with nvidia gforce GTX 660M. I first run 12.04 on this machine and was able to install nvidia_current drivers from swat ppa: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current This worked in 12.04 and after rebooting the machine my graphics where working properly. After upgrade to 12.10 however, the machine boots into a low resolution desktop which I can not really interact with. I suspect this is due to the driver not being loaded properly. To fix this, I have to switch to ctrl+alt+F1 session and manually load the nvidia_current module and restart the desktop manager: sudo modprobe nvidia_current sudo service lightdm restart Now everything works fine again. However, I would like not to have to do this every time I reboot the machine. I also dont want to hack an script to do this on load. Basically, if things are setup currectly, the nvidia_current driver which is installed should load. How can I make sure nvidia_current driver module loads properly when system starts?

  Read the article

• Loading images in XNA 4.0; "Cannot Open File" Problems

  - by user32623

  Okay, I'm writing a game in C#/XNA 4.0 and am utterly stumped at my current juncture: Sprite animation. I understand how it works and have all the code in place, but my ContentLoader won't open my file... Basically, my directory looks like this: //WindowsGame1 - "Game1.cs" - //Classes - "NPC.cs" - Content Reference - //Images - "Monster.png" Inside my NPC class, I have all the essential drawing functions, i.e. LoadContent, Draw, Update. And I can get the game to find the correct file and attempt to open it, but when it tries, it throws an exception and tells me it can't open the file. This is how my code in my NPC class looks: Texture2D NPCImage; Vector2 NPCPosition; Animation NPCAnimation = new Animation(); public void Initialize() { NPCAnimation.Initialize(NPCPosition, new Vector2(4, 4)); } public void LoadContent(ContentManager Content) { NPCImage = Content.Load<Texture2D>("_InsertImageFilePathHere_"); NPCAnimation.AnimationImage = NPCImage; } The rest of the code is irrelevant at this point because I can't even get the image to load. I think it might have to do with a directory problem, but I also know little to nothing about spriting or working with images or animations in my code. Any help is appreciated. Not sure if I provided enough information here, so let me know if more is needed! Also, what would be the correct way to direct that Content.Load to Monster.png given the current directory situation? Right now I just have it using the full path from the C:// drive. Thanks in advance!

  Read the article

• UnsatisfiedLinkError: no swt-gtk-4233

  - by Abogical

  I'm a Java newbie who just a made a simple Java program using SWT for GUI via eclipse Juno. The code was working and the program was able to run inside eclipse, so I compiled it and made it a runnable jar file so it can be run outside eclipse. I tried to run it using the terminal and this error came up. Exception in thread "main" java.lang.UnsatisfiedLinkError: Could not load SWT library. Reasons: no swt-gtk-4233 in java.library.path no swt-gtk in java.library.path Can't load library: /home/abody/.swt/lib/linux/x86_64/libswt-gtk-4233.so Can't load library: /home/abody/.swt/lib/linux/x86_64/libswt-gtk.so at org.eclipse.swt.internal.Library.loadLibrary(Library.java:331) at org.eclipse.swt.internal.Library.loadLibrary(Library.java:240) at org.eclipse.swt.internal.C.<clinit>(C.java:21) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:63) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:54) at org.eclipse.swt.widgets.Display.<clinit>(Display.java:133) at Class1.main(Class1.java:12) So now it looks like it can't find "libswt-gtk-4233.so" and the other file. However, when I took a look at he ".swt" folder I had an "libswt-gtk-3740.so" not 4233. So its trying to find a file that is more up-to-date. So what does that mean, should I update SWT? what's going on?

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Can I use my prepaid phone balance (in pesos) to buy from the Software Centre?

  - by obetus

  Using local network broadband, we can use it to buy games and applications from load balance. Is there any possible ways to use it also in Ubuntu software Center? additional: I'm using mobile broadband for the internet connection,this broadband has a sim card and account number where you can download money from buying a prepaid card worth 100 pesos,300 pesos or 500 pesos, provided by our local network. We use this mobile broadband when there is no wifi connection. There are two kinds of mobile broadband, one is postpaid account and the other is prepaid account. I use prepaid account, this kind of account can load a money for transaction like data plans, from 10 pesos for 30 minutes internet connection or 200 pesos for 5 days internet connection., and this prepaid account can load 5 pesos up to thousands of pesos. Now, if this prepaid mobile broadband can provide money in pesos and has internet connection, I think it can also use it for buying goods or applications or games via internet. i think its only need a software that can detect the sim card number and the money balance for transactions. Sorry for my bad english but I hope you got my point.

  Read the article

• Dual boot Win/7 and Ubuntu 12.04

  - by Brian

  So I've always wanted Ubuntu along with windows 7 and finally I went to try and make my computer that last night. (( I'll just skip the long story. )) I loaded Ubuntu from CD, Version 12.04 and it loaded fine and then I clicked the install icon. It asked me witch option I would like to proceed with, and I answered Ubuntu, in Windows 7. So it did everything rather quickly, and restarted itself; upon restarting itself it ejected the CD, and I thought everything was good to go. It brought me to the Option to either load Ubuntu or Windows, I was thinking to myself wow that was alot easier than I thought; Windows 7 Loads fine after it checked the HDD but when I go to load Ubuntu it brings me to the loading screen and then stays there for a long period time, finally moves on as if it was going to load into the regular dashboard, but loads into a dos looking thing. (( I'm sorry if I sound retarded explaining everything I'm not great with computers )) And at the very time it says something like installation failed. It also says it could not find a file or something like that. If you need me to go back and get the full message and put it up here I will. But if I put the CD in it loads fine. Thanks in advance for everyone that helps me solve this problem.

  Read the article

• Could SQL Server 2008 replication be used with NLB to allow unlimited scaling of reporting servers?

  - by John Keranos

  We are currently using transactional replication in SQL Server 2008 to keep a secondary reporting server synchronized with a primary database server. This has been working weel and keeps some of the load off the primary server. Would it be possible to scale this solution to multiple reporting servers? We're expecting an increased load of read-only queries and it would be nice to be able to add reporting servers as needed. The general idea was the following: Each reporting server would use a "pull" subscription to get the data from the primary database publication. These reporting databases could be a couple of minutes behind the primary server without it being an issue. The reporting servers would be NLB'd together. All read-only queries would be directed to the NLB which should spread the load across the servers.

  Read the article

• Is it possible to really delete a Facebook chat message or the whole chat?

  - by Forza

  Ok, so a few months ago me and a friend send a whole bunch of smileys to each other in Facebook chat just for fun. I wish I had known at that time how stupid that was. Even until today, every time I open the chat with that contact, the Facebook tab totally locks up when I try to load that chat. It will load eventually after five minutes or so, but it becomes very inconvenient at times. On Facebook Messenger for Android, there's no problem and the chat works fine. I'd like to know if there's any way to completely delete a Facebook chat (not archive them) and start over so it won't load the smileys anymore.

  Read the article

• Crackling sound from microphone recently, in 13.04

  - by Patrig Droumaguet

  I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >