Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 158/346 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• connecting to a network using route command

  - by ami

  I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to connect to these servers from other machines I used the following command "route ADD 10.1.1.0 MASK 255.255.255.0 192.168.223.220" and than I was able to connect to the servers using there 10.1.1.xx address. The problem is that the hard disk of main server(192.168.223.220) died and was replaced and after the that I am not able to connect to the servers as before, the route command succeeds and I can ping 10.1.1.20 but not the other servers. Thanks I am using Windows XP and the print outs are D:\AurosHome\Scriptsipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : N100-master Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 Physical Address. . . . . . . . . : 00-30-48-34-BA-B9 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.225.180 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.225.254 DNS Servers . . . . . . . . . . . : 192.168.225.2 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration Physical Address. . . . . . . . . : 00-30-48-34-BA-B8 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.1.1.20 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Mellanox IPoIB Adapter Physical Address. . . . . . . . . : 00-02-C9-25-34-0D D:\AurosHome\Scriptsroute print Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 30 48 34 ba b9 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 - Packet Sche duler Miniport 0x3 ...00 30 48 34 ba b8 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Packet Schedul er Miniport 0x10005 ...00 02 c9 25 34 0d ...... Mellanox IPoIB Adapter - Packet Scheduler Miniport =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.225.254 192.168.225.180 10 10.1.1.0 255.255.255.0 10.1.1.20 10.1.1.20 10 10.1.1.20 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.225.0 255.255.255.0 192.168.225.180 192.168.225.180 10 192.168.225.180 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.225.255 255.255.255.255 192.168.225.180 192.168.225.180 10 224.0.0.0 240.0.0.0 10.1.1.20 10.1.1.20 10 224.0.0.0 240.0.0.0 192.168.225.180 192.168.225.180 10 255.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 1 255.255.255.255 255.255.255.255 10.1.1.20 10005 1 255.255.255.255 255.255.255.255 192.168.225.180 192.168.225.180 1 Default Gateway: 192.168.225.254 Persistent Routes: None

  Read the article

• Tuning Linux + HAProxy

  - by react

  I'm currently rolling out HAProxy on Centos 6 which will send requests to some Apache HTTPD servers and I'm having issues with performance. I've spent the last couple of days googling and still can't seem to get past 10k/sec connections consistently when benchmarking (sometimes I do get 30k/sec though). I've pinned the IRQ's of the TX/RX queues for both the internal and external NICS to separate CPU cores and made sure HAProxy is pinned to it's own core. I've also made the following adjustments to sysctl.conf: # Max open file descriptors fs.file-max = 331287 # TCP Tuning net.ipv4.tcp_tw_reuse = 1 net.ipv4.ip_local_port_range = 1024 65023 net.ipv4.tcp_max_syn_backlog = 10240 net.ipv4.tcp_max_tw_buckets = 400000 net.ipv4.tcp_max_orphans = 60000 net.ipv4.tcp_synack_retries = 3 net.core.somaxconn = 40000 net.ipv4.tcp_rmem = 4096 8192 16384 net.ipv4.tcp_wmem = 4096 8192 16384 net.ipv4.tcp_mem = 65536 98304 131072 net.core.netdev_max_backlog = 40000 net.ipv4.tcp_tw_reuse = 1 If I use AB to hit the a webserver directly I easily get 30k/s connections. If I stop the webservers and use AB to hit HAProxy then I get 30k/s connections but obviously it's useless. I've also disabled iptables for now since I read that nf_conntrack can slow everything down, no change. I've also disabled the irqbalance service. The fact that I can hit each individual device with 30k/s makes me believe the tuning of the servers is OK and that it must be some HAProxy config? Here's the config which I've built from reading tuning articles, etc http://pastebin.com/zsCyAtgU The server is a dual Xeon CPU E5-2620 (6 cores) with 32GB of RAM. Running Centos 6.2 x64. The private and public interfaces are on separate NICS. Anyone have any ideas? Thanks.

  Read the article

• HP DL380 G3 2U For Basic Web Server in 2012

  - by ryandlf

  I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs of running my own web server before I bite the bullet and spend a couple grand on a server. The specs are: Dual (2) Intel Xeon 2.4GHz 400MHz 512KB Cache 4GB PC2100 ECC Registered Memory 6 x 72GB 10K U320 SCSI Hard Drives Smart Array 5i RAID Controller Redundant Power Supplies DVD/Floppy, Dual Intel GB NIC's, USB Or would I be better off spending a couple hundred bucks on something like: this new HP Seems like the only major difference is SATA and a bit of storage, but I will likely be implementing a separate storage system of some sort anyways. I guess it also wouldn't hurt to mention that I plan on running a linux server distro, so would the hardware be likely to support linux with a system that is 4 generations old? I don't mind spending a couple hundred extra dollars if its a better solution, but as mentioned previously I am simple looking for a server to learn on and probably use for a year or so while I put together a small - medium size website.

  Read the article

• Can I install windows on an SSD and access data from my old windows HDD?

  - by nzifnab

  I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

  Read the article

• running a laptop continuously

  - by intuited

  I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

  Read the article

• How can see what processes makes my server slow?

  - by Steven

  All my websites on my server are extremely slow or not loading at all. Even server admin (Plesk) will not load some times. There's been no changes to the sites for the last coupple of months. How can I see what processes is making my server slow? My environment looks like this: Server: VPS running Linux 2.8.x OS: Centos 5 Manage interface: Plesk 9.x Memmory: 1024MB CPU: 2.2GHz My websites run on PHP and MySQL. I finally managed to telnet (Putty + SSH) in to my server. Running top did not show any processes using more than max 2% CPU and none were using exesive memmory. I also got a friend to install a program that checks the core files, and all seemed fine. So I'm leaning towards network issues or some other server malfunction. But I'm not able to find out what can be wrong. Here are some answers to Sean Kimball: I don't run mail services on my server yet There are noe specific bandwidth peaks. Prefork looks like this <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> Not sure what you mean with DNS question. But I think it's up and running. There are no processes running wild Where can I find avarage load? Telnet is disabled and I have to log in using SSH :)

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• SQL queries break our game! (Back-end server is at capacity)

  - by TimH

  We have a Facebook game that stores all persistent data in a MySQL database that is running on a large Amazon RDS instance. One of our tables is 2GB in size. If I run any queries on that table that take more than a couple of seconds, any SQL actions performed by our game will fail with the error: HTTP/1.1 503 Service Unavailable: Back-end server is at capacity This obviously brings down our game! I've monitored CPU usage on the RDS instance during these periods, and though it does spike, it doesn't go much over 50%. Previously we were on a smaller instance size and it did hit 100%, so I'd hoped just throwing more CPU capacity at the problem would solve it. I now think it's an issue with the number of open connections. However, I've only been working with SQL for 8 months or so, so I'm no expert on MySQL configuration. Is there perhaps some configuration setting I can change to prevent these queries from overloading the server, or should I just not be running them whilst our game is up? I'm using MySQL Workbench to run the queries. Here's an example.... SELECT * FROM BlueBoxEngineDB.Transfer WHERE Amount = 1000 AND FromUserId = 4 AND Status='Complete'; As you can see, it's not overly complex. There are only 5 columns in the table. Any help would be very much appreciated - Thanks!

  Read the article

• How to troubleshoot this memory usage?

  - by Camran

  I have a classifieds website. I use PHP, MySql, and SOLR. Solr uses a Servlet Container, in my case JETTY, which is java application. I just noticed that something was terribly wrong on my website. I opened the terminal and entered the "top" command and noticed that JAVA was EATING all the cpu and mem. Now I thought "Ok, maybe I need more mem and cpu" So I increased it. But along with the increase the java app started eating more. This has never happened before, and it is either a bug, or a hack of some kind. Anyways, I need to troubleshoot this now, and so I wonder how do I do this? Can I somehow pinpoint exactly when the memory usage started to go up from some error log? How does one troubleshoot this? How do I prevent it? Is it possible to prevent too many requests somehow, if they are within a timeline? Thanks

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx.

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

• Ubuntu's garbage collection cron job for PHP sessions takes 25 minutes to run, why?

  - by Lamah

  Ubuntu has a cron job set up which looks for and deletes old PHP sessions: # Look for and purge old sessions every 30 minutes 09,39 * * * * root [ -x /usr/lib/php5/maxlifetime ] \ && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 \ -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir \ fuser -s {} 2> /dev/null \; -delete My problem is that this process is taking a very long time to run, with lots of disk IO. Here's my CPU usage graph: The cleanup running is represented by the teal spikes. At the beginning of the period, PHP's cleanup jobs were scheduled at the default 09 and 39 minutes times. At 15:00 I removed the 39 minute time from cron, so a cleanup job twice the size runs half as often (you can see the peaks get twice as wide and half as frequent). Here are the corresponding graphs for IO time: And disk operations: At the peak where there were about 14,000 sessions active, the cleanup can be seen to run for a full 25 minutes, apparently using 100% of one core of the CPU and what seems to be 100% of the disk IO for the entire period. Why is it so resource intensive? An ls of the session directory /var/lib/php5 takes just a fraction of a second. So why does it take a full 25 minutes to trim old sessions? Is there anything I can do to speed this up? The filesystem for this device is currently ext4, running on Ubuntu Precise 12.04 64-bit. EDIT: I suspect that the load is due to the unusual process "fuser" (since I expect a simple rm to be a damn sight faster than the performance I'm seeing). I'm going to remove the use of fuser and see what happens.

  Read the article

• Allied Telesis router: IP filtering for the LOCAL interface

  - by syneticon-dj

  Given an Allied Telesis router with an AlliedWare OS (2.9.1) I would like to disable access to all management services of the router except for a number of subnets (or alternatively have what is a "management VLAN" with other manufacturers' switch and router models). What I have tried so far: creating a new VLAN and an appropriate IP interface, setting the LOCAL IP into this subnet, creating an IP filter for the IP interface and specifying my exclusion subnets: it simply does not work as intended as I can access the LOCAL IP set from any of the other VLAN interfaces - the traffic is apparently not going through my defined filter set at all creating a new IP filter set and binding it to the LOCAL IP interface: this seems not to affect any kind of traffic at all, the counters for the filter set remain at zero packets setting the Remote Security Officer Level IP address range: this only restricts the ability for a user with the Security Officer privilege level to log in from any but the specified address ranges / subnets. Unfortunately, it does not prevent service availability (and thus DoS capacity) or the ability to log in as a less privileged user (e.g. a "manager") calling technical support: unfortunately no solution so far What I have not tried: creating a filter set for each and every IP interface defined on the router and excluding access to the router's management IP: I would like to reduce the overhead induced by IP filters as the router already is CPU-constrained at times. Setting up filters for every IP interface would mean that each and every traffic packet would have to pass the filters, thus consuming CPU cycles. If by any means possible, I would like to find a different solution.

  Read the article

• memory usage setting

  - by user127610

  everybody,the memory usage is too much,what can i do? top - 12:54:37 up 7 days, 4:38, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 18 total, 2 running, 16 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048800k total, 917424k used, 131376k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2840 1364 1204 S 0.0 0.1 0:02.17 init 1161 root 14 -4 2320 600 420 S 0.0 0.1 0:00.00 udevd 1391 root 18 0 35512 1288 948 S 0.0 0.1 0:03.53 rsyslogd 1409 root 15 0 8432 1164 700 S 0.0 0.1 0:03.87 sshd 1416 root 18 0 3156 868 692 S 0.0 0.1 0:00.00 xinetd 1423 root 18 0 8672 716 292 S 0.0 0.1 0:00.00 saslauthd 1424 root 18 0 8672 488 64 S 0.0 0.0 0:00.00 saslauthd 1431 root 15 0 7020 1168 616 S 0.0 0.1 0:00.99 crond 1450 root 25 0 6236 1444 1228 S 0.0 0.1 0:00.05 sh 3328 mysql 15 0 799m 42m 4892 S 0.0 4.1 0:02.07 mysqld 15479 root 15 0 11304 3332 2688 R 0.0 0.3 0:00.06 sshd 15482 root 15 0 6372 1688 1404 S 0.0 0.2 0:00.00 bash 15497 root 15 0 2536 1044 864 R 0.0 0.1 0:00.00 top 20137 www 15 0 20672 14m 864 S 0.0 1.4 0:00.87 nginx 22351 www 16 0 52324 26m 9244 S 0.0 2.6 0:13.94 php-fpm 24231 www 16 0 51928 25m 9260 S 0.0 2.5 0:13.52 php-fpm 32682 root 15 0 35832 3228 864 S 0.0 0.3 0:02.18 php-fpm 32686 root 18 0 7368 1616 888 S 0.0 0.2 0:00.00 nginx

  Read the article

• Can a VM perform better when only two cores instead of four cores are presented to it?

  - by arcain

  We had a VMWare VM at work with two cores allocated to it that ran a pretty heinous process in IIS. Under load the process was maxing out the CPU usage on both cores, so we asked our system engineers to present the other two cores of the physical processor to the VM. The engineer immediately said that this would not improve performance at all, but would make the VM perform worse. That statement didn't make much sense to me, and I'm wondering how what the engineer said could be true. Are there actually cases where four cores presented to a VM would cause worse performance than two cores on the same physical hardware? Let's assume an ideal situation where there's only one VM on the host server, so nothing is being shared with other OS instances. I believe the physical server had a single quad core processor, and was most likely hosting multiple VMs. I don't really know what version of ESX was running on the host, nor do I know with certainty what the physical processor config was, but from within the VM I had access to, I saw two 3.33 GHz AMD processors. In the end, I never got to test the engineer's assertion out because (while we were trying to get the VM upgraded) we were able to optimize the process and reduce it's CPU consumption, and 2) we ended up migrating to a different VM on another ESX server which had four cores presented to it.

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• Server specification recommendation

  - by foo

  To cut the story short, I can't buy an item (server/cpu/motherboard/ram) that costs more than USD 330. However, I can combine them, meaning, I can buy a CPU that costs USD 330 and motherboard that costs USD 330. With this limitation, I can't buy a powerful 1U server which will definitely costs me more USD 330. With that in mind, I was hoping to build a powerful desktop PC which will be used as a database server. However, through my experience, desktop PC doesn't last very long, usually the motherboard will just die by itself after 1 or 2 years. So, what would you guys recommend me to buy with this kind of budget? Every item must be <= USD 330. Will be used as a MySQL server. RAID would be nice. 1TB is pretty big for my data. I do not need external graphic card (onboard would do just fine), mouse, keyboard, monitor. Linux friendly. One ethernet port is good enough. It's important that those hardware is made of components that will last long (at least 3 years or something). The server will be placed in an air conditioned room, but a good ventilation for the server is always preferred. I won't overclock it. Intel processor is preferred. Thanks in advance.

  Read the article

• Server taking too long to respond error

  - by DCJones

  Hi, This is my first post on serverFault and my first entry in to web server configuration. The hardware and software. CPU: GenuineIntel, Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz OS: Linux 2.6.18-128.el5 Memory: 2Gb Background. I am running a small database (MySQL), around 1000 records with each record containing 44 fields. At the start of each day “00:01” the tables are cleared and populated with fresh data. The are 10 remote PCs all running Winodws XP and Firefox internet browser. All remote PC’s are connected to the internet using a min 4Gb broadband connection. Each remote PC runs a URL which displays a dynamic page of data which is refreshed every 20 seconds. This is a continual process 24 hours a day. I problem I am having is on odd occasions throughout the day the PC browser error with “Server taking too long to respond error”. What I am trying to find our is if I have the correct setting in the httpd.conf file on the server. Any help or advice anyone can provide would be very helpful. Best regards Dereck Server config file: httpd.conf ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 254 MaxRequestsPerChild 4000 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0

  Read the article

• Fedora Core 6 Migration

  - by Matthew Sprankle

  I am at a loss as to what I should to for this server. I need it to run php5.3 and corresponding version of mysql. I received a client today through work that is using Fedora core 6 running 10 very small websites on some very hodge podge setup. My original idea was just upgrade to php5.3. I have yum (installed 3.0.8) reconfigured for the fedora archive. The latest version of php it allows is 5.1.8. I am still relatively new to server setups and am nervous about wiping their server to upgrade it. Since it is about 6-8 years old I'm not sure if it will even support the newest version of fedora. The server specs are: Parallels Plesk Panel version 9.5.4 Operating system Linux 2.6.9-023stab048.4-smp CPU GenuineIntel, Intel(R) Xeon(R)CPU E5335 @ 2.00GHz (10gb disk space and 1gb of memory). I use fedora for my personal server so I was a little familiar with it. I haven't done anything too extravagant. Is there a way I can escape this nightmare with installing php5.3 or do I need to migrate these sites to a new server?

  Read the article

• java memory allocation under linux

  - by pstanton

  I'm running 4 java processes with the following command: java -Xmx256m -jar ... and the system has 8Gb memory under fedora 12. however it is apparently going into swap. how can that be if 4 x 256m = 1Gb ? EDIT: also, how can all 8Gb of memory be used with so little memory allocated to basically the only thing running? is it java not garbage collecting because the OS tells it it doesn't need to or what? TOP: top - 20:13:57 up 3:55, 6 users, load average: 1.99, 2.54, 2.67 Tasks: 251 total, 6 running, 245 sleeping, 0 stopped, 0 zombie Cpu(s): 50.1%us, 2.9%sy, 0.0%ni, 45.1%id, 1.1%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8252304k total, 8195552k used, 56752k free, 34356k buffers Swap: 10354680k total, 74044k used, 10280636k free, 6624148k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1948 xxxxxxxx 20 0 1624m 240m 4020 S 96.8 3.0 164:33.75 java 1927 xxxxxxxx 20 0 139m 31m 27m R 91.8 0.4 38:34.55 postgres 1929 xxxxxxxx 20 0 1624m 200m 3984 S 86.2 2.5 183:24.88 java 1969 xxxxxxxx 20 0 1624m 292m 3984 S 65.6 3.6 154:06.76 java 1987 xxxxxxxx 20 0 137m 29m 27m R 28.5 0.4 75:49.82 postgres 1581 root 20 0 159m 18m 4712 S 22.5 0.2 52:42.54 Xorg 2411 xxxxxxxx 20 0 309m 9748 4544 S 20.9 0.1 45:05.08 gnome-system-mo 1947 xxxxxxxx 20 0 137m 28m 27m S 13.3 0.4 44:46.04 postgres 1772 xxxxxxxx 20 0 135m 25m 25m S 4.0 0.3 1:09.14 postgres 1966 xxxxxxxx 20 0 137m 29m 27m S 3.0 0.4 64:27.09 postgres 1773 xxxxxxxx 20 0 135m 732 624 S 1.0 0.0 0:24.86 postgres 2464 xxxxxxxx 20 0 15028 1156 744 R 0.7 0.0 0:49.14 top 344 root 15 -5 0 0 0 S 0.3 0.0 0:02.26 kdmflush 1 root 20 0 4124 620 524 S 0.0 0.0 0:00.88 init 2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0 4 root 15 -5 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0

  Read the article

• Eee PC 1015BX ram compatibility?

  - by AdrianaMX

  Asus Eee PC 1015BX Operating System Windows 7 Starter, 32bit CPU AMD Fusion APU C60 1.0GHz (dual core) Processor Graphic AMD Radeon HD 6290 (256 MB Shared) Memory DDR3, 1 x SO-DIMM, 1GB I have upgraded the preloaded "Windows 7 Starter" to "Windows 7 Professional" I want to upgrade the ram, from 1gb (factory) to 4 gb. What should i buy? SODDR3, 4GB, 1066MHZ, PC3-8500, 204PIN? or SODDR3, 4GB, 1333MHZ, PC3-10666, 204PIN? I already know that Windows 7 32-bits can't handle 4gb, only 3gb (but 3gb is better than one stick of 2gb). ASUS send me this link, but i think they are wrong, (or Insufficient Information for me) http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=ASU&Line=Eee%20PC&Model=71404 Thank you. CPU-Z Chipset Memory Type DDR3 Memory Size 750 MBytes Memory Frequency 532.2 MHz (3:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Bank Cycle Time (tRC) 27 Memory SPD NO INFO AIDA64 North bridge Properties North bridge AMD K14 IMC Supported Memory Types DDR3-800, DDR3-1066 SDRAM Memory Slots DRAM Slot #1 1 GB (DDR3 SDRAM) Integrated Graphics Controller Graphics Controller Type AMD Radeon HD 6290 (Wrestler) Graphics Controller Status Enabled Graphics Frame Buffer Size 256 MB

  Read the article

• Ubuntu 12.04 VirtualBox on powerful W7 quite slow

  - by wnstnsmth

  I own a Thinkpad T420s with 8GB RAM, 160 GB SSD and a quite fast i7 processor. Summa summarum a very fast computer that works perfectly. Now, I am not very impressed by the performance of my Ubuntu 12.04 virtual machine running on VirtualBox 4.1.18. I assume that Virtual Machines are always a bit slower than the guest system, still I think it should be more performant given the hardware settings I give it: 4096 MB RAM 1 CPU without CPU limitation (I would like to give it more but then it does not seem to work - I am not experienced in this maybe somebody could give me advice on this too) Activated PAE/NX, VT-x/AMD-V and Nested Paging 96 MB Graphics Memory (no 2D or 3D acceleration) ~ 14 GB disk space, currently about 7 GB are used Maybe I misconfigured something, could you give me a hint please? Thanks! Edit: What I mean by slow is that for example switching tabs in the browser (whether FF or Chrome) only goes with a 0.5s delay or something, as well as switching application windows and/or double-clicking applications in the dock to get all open windows.. opening Aptana takes about a minute whereas opening something like Photoshop on the guest system takes 5 seconds

  Read the article

• Can't connect to wi-fi hotspot in Ubuntu 11.10

  - by ht3t

  I'm new to Ubuntu. I'm having a wireless network problem in Ubuntu 11.10. I made a hotspot using Connectify from a computer which is running Windows 7. I can access it in Windows 7 but not in Ubuntu 11.10. Every time I access it,I get a message "disconnected". I'm using msi fx 400 notebook with Intel Centrino wireless -N 1000 wireless card. Ubuntu version is 11.10 with KDE desktop. $ sudo lshw -c network [sudo] password for ht3t: *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:56:b8:f0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:44 memory:e7400000-e7401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 40:61:86:b6:b1:a2 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw IP=192.168.21.107 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:9000(size=256) memory:e6004000-e6004fff memory:e6000000-e6003fff I can't do anything without internet connection. How can I fix this?

  Read the article

• Windows 8 doesn't start up after installation

  - by Raj BD

  I have a DELL INSPIRON n5110 machine running Windows 7 Home Premium 64-bit. It has 6GB of RAM and 500 GB hard disk capable to run any Windows and Linux system. And I recently attempted to install Windows 8 in the machine. Installation goes fine and smooth until the final stage when windows is done installing and GETS DEVICES READY. When GETTNG DEVICES READY reaches about 60%, the screen goes blank with the machine running. After a while it reboots. And after the new Windows Logo with dotted circles are done showing up, the screen goes blank again (when we'd expect login screen to show up). There is not even a cursor. I can see the HARD DISK ACTIVITY LED blinking but nothing shows up in the screen. I've tried CLEAN INSTALL several times. The DVD is fine, it installed and worked well in my friends' laptop PCs. I tried installing both PRO version and ENTERPRISE version and both 32-bit and 64-bit. But the problem was same everytime. Finally, I had to reinstall Windows 7 which installed and ran without any problem. The problem, we can guess, is GRAPHICS perhaps. I have Intel SandyBridge Graphics Mobile Chipset (Intel HD Graphics 3000). But if Windows 7 and Linux distrubutions like Mint and BackTrack can run on the machine, why on earth, would Windows 8 not run?

  Read the article

• How many VPS do I need for my website? [duplicate]

  - by michael

  This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers I made a website which aims at simulating a trading market. There are a list of prices and corresponding volumes that people want to purchase. Users can purchase at any price any time. My website retrieves the prices and volumes from my database every 2 seconds (I have to update the user's browser frequently to allow them to see the current market). Users' database INSERT query can be sent any time if they purchase. I used ajax to post or get data from my database (sometimes nested ajax calls). So, every 2 seconds, each user will send or retrieve data by using more than 20 database queries (in order to show a users the current prices and volumes). Also, I may have 200 users at a time. I was not using VPS before, and I got banned because of using too much CPU resources on my host. Now, I've purchased VPS*2 from a hosting servers. I have: CPU Speed: 2000 Mhz Memory: 2048 MB Disk Space: 20000 MB Bandwidth: 2000 GB Connection: 40 Mb/s Dedicated IP's 2 IP's Is this enough for my 200 users? Also, which VPS OS is suitable for me? Thank you.

  Read the article

• Programming an Android Button to update EditText views

  - by bergler77

  Ok guys, I have a button in android that i'm trying to use to update 8 EditText Views with different random numbers. Everything works up until I click the button. It appears I am missing a resource according to the debugger, but I'm not sure what. I've tried several different ways of implementing the button. Here is what I have after looking at several posts. import java.util.Random; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; public class MyCharNewChar extends MyCharActivity { private OnClickListener randomButtonListener = new OnClickListener(){ public void onClick(View v) { //Button creates a set of random numbers and updates the values //of the EditText views. Random rand = new Random(); int STR = 1 + rand.nextInt(12); int AGI = 1 + rand.nextInt(12); int DEX = 1 + rand.nextInt(12); int WIS = 1 + rand.nextInt(12); int INT = 1 + rand.nextInt(12); int CON = 1 + rand.nextInt(12); int HP = 1 + rand.nextInt(20); int AC = 1 + rand.nextInt(6); EditText str = (EditText) findViewById(R.id.str); str.setText(STR); EditText agi = (EditText) findViewById(R.id.agi); agi.setText(AGI); EditText dex = (EditText) findViewById(R.id.dex); dex.setText(DEX); EditText wis = (EditText) findViewById(R.id.wis); wis.setText(WIS); EditText intel = (EditText) findViewById(R.id.intel); intel.setText(INT); EditText con = (EditText) findViewById(R.id.con); con.setText(CON); EditText hp = (EditText) findViewById(R.id.baseHP); hp.setText(HP); EditText ac = (EditText) findViewById(R.id.baseAC); ac.setText(AC); } }; @Override public void onCreate(Bundle savedInstanceState){ super.onCreate(savedInstanceState); setContentView(R.layout.newchar); Button randomButton = (Button) findViewById(R.id.randomButton); randomButton.setOnClickListener(randomButtonListener); } } Here is the xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/linearlayoutNew1" android:layout_width="match_parent" android:layout_height="match_parent" android:orientation="vertical" android:background="@drawable/background" > <TextView android:id="@+id/newCharLabel" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="@string/new_character_screen" android:textSize="24dp" android:textColor="@color/splash" android:textStyle="bold" android:gravity="center"/> <TextView android:id="@+id/nameLabel" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="@string/nameLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/editText1" android:layout_width="match_parent" android:layout_height="wrap_content" android:ems="10" android:inputType="textPersonName" > <requestFocus /> </EditText> <TableLayout android:id="@+id/statsLayout" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp"> <TableRow android:id="@+id/tableRow01" android:orientation="horizontal" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp"> <TextView android:id="@+id/strLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/strLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/str" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number" /> <TextView android:id="@+id/agiLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/agiLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/agi" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/dexLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/dexLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/dex" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> </TableRow> <TableRow android:id="@+id/tableRow02" android:orientation="horizontal" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp"> <TextView android:id="@+id/intLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/intLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/intel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/wisLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/wisLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/wis" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/conLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/conLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/con" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> </TableRow> </TableLayout> <LinearLayout android:id="@+id/linearlayoutNew02" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp" android:gravity="center"> <TextView android:id="@+id/baseHPLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/hpLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/baseHP" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/baseACLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/acLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/baseAC" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> </LinearLayout> <LinearLayout android:id="@+id/linearlayoutNew03" android:layout_width="match_parent" android:layout_height="wrap_content" android:orientation="horizontal"> <Button android:id="@+id/randomButton" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="1" android:text="@string/randomButton" android:textSize="16dp" android:clickable="true"/> </LinearLayout> </LinearLayout> I have also tried setting the onClick in xml to setup a specific onClick method. Still the same error so I must have a problem elsewhere. Any suggestions would be great!

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >