Search Results

Search found 19446 results on 778 pages for 'naive machine learner'.

Page 158/778 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• debian gateway using iptables

  - by meijuh

  I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

  Read the article

• Which IP addresses are using remote dekstop?

  - by Andomar

  We have a server that has an open remote desktop port to the internet (no VPN.) Several people are allowed to log on to the machine remotely. The server runs Windows 7 (desktop OS.) I can find logon times using Event Viewer, but it does not show the IP address of the remote machine. At any rate, manually browsing Event Viewer for all login events would be time consuming, to say the least.) Is a way to find out which IP addresses are using Remote Dekstop ?

  Read the article

• Complete stack traces from Hyperic

  - by Mike Kushner

  I've setup Hyperic to run on our CI-machine, and every once in a while it reacts to some random stack trace and sends of an alert. So far so good, we've caught a lot of intermittent bugs that way. My only issue is that the alert only contains the first error line and not the entire stack trace, which requires me to access the machine and look at the logs manually. Is there any way to modify the alert message to contain more information, alternatively to include the log file in the alert mail?

  Read the article

• Generic Hp LaserJet 1012 Printer Drivers For Win7 x64?

  - by TheDeeno

  I've recently upgraded a machine to win7 x64. This machine has a 1012 printer attached. According to HP's site, the printer is no going to be supported in win7. Are there generic drivers that may suffice?

  Read the article

• postgresql login from remote

  - by Hellnar

  Hello, I want to give remote access to my postresql db (8.2) to computers that are at the same lan, at the default config I have added this line to pg_hba.conf where xxx.xx.xx.xx is the ip of the machine that hosts postgresql. This machine is a windows 2k server. # IPv4 local connections: host all all 0.0.0.0/0 password host all all xxx.xx.xx.xx/24 password There no firewall or such blocking the connection between and `listen_addresses = '*' for postgresql.conf .

  Read the article

• Windows XP: saving large files on network share stalls

  - by mklhmnn

  When I transfer larger files (a few hundred MB) on a network share (either Buffalo LinkStation or other Windows machine) from my Windows XP Pro SP3, it always stalls. Smaller files are no problem, reading from a network share is also no problem. I already had this problem on my notebook and now on my desktop machine, so I assume that it most likely is no driver problem. Does anybody have a clue what could be the problem — or better: the solution?

  Read the article

• How to replicate the Handbrake and DVD43 combination on 64 bit Windows 7?

  - by xiaodai

  I recently upgraded my pc to windows 7. On my old 32bit machine I used to be able to run DVD43 in the background and use Handbrake to rip a DVD into iPhone format? DVD43 doesn't work on Windows 7 4 bit. So what's the best way to rip the DVDs I want into iPhone format on my Windows 7 64 bit machine?

  Read the article

• Resolve linux hostname in windows

  - by Martin Giffy D'Souza

  Hi, I have a simple home network with Windows 7 machines and Linux machines (Fedora 12 and 13). I'd like to be able to resolve the Linux machine names from the windows machine. For example: -- Windows 7 ping mylinuxmachine Currently this does not resolve. Any ideas? Thank you, Martin

  Read the article

• Windows XP Professional Version 2002 SP3 restarts when I try to Hibernate

  - by dario_ramos

  I googled this and tried some solutions, but nothing seems to work. In the past, Hibernate worked fine. Someone told me that this can be caused by specific hardware, and I have lots of that, because this is a dev machine which we use to develop modules that interact with lots of different hardware. Moreover, this machine also uses RAID, which might have something to do. Is there any way to troubleshoot this by looking at some log file or using some tool?

  Read the article

• Testing Firewire 800 port on MacBook Pro

  - by dtlussier

  I am having trouble getting my MacBook pro to mount an external Firewire hard drive. I am able to mount the disk no problem on other Macs, just not my machine. I haven't received any errors from my machine, and don't see anything related to the Firewire port in the logs. Are there good diagnostic tools for this type of problem that come with the Mac? other free alternatives ?

  Read the article

• How do I lock my homepage in IE8 so applications cannot alter it?

  - by Shimmy

  I have few programs on my machine that keep on changing my home-page. I tried found this link, but I didn't find the path in the registry. What I wanna do is lock the homepage so it cannot be change by programs other than the internet options of the control panel. I use IE8 on Win7x64 machine. I guess the reg key is slightly different.

  Read the article

• Can I Be Alerted On-Screen Each Time Someone Remote Desktop's Onto My Windows 2003 Server

  - by Sohnee

  I work all day on a Windows Server 2003 machine and have noticed people "borrowing" my machine by using Remote Desktop to log in. This is pretty much "normal behaviour" at the company I work at, but I'd like to know when this is happening. Is there any way I can be alerted each time someone remote desktop's onto my server? A simple "Bob has logged in" would be great - and I imagine there is a facility somewhere to enable this.

  Read the article

• SSH socks proxy tunnel without interactive session?

  - by dirtside

  I use ssh -D 1080 myhost.org ...to open up an SSH tunnel from my work machine to my home machine, so as to bypass the idiotic content filter on the corporate firewall. However this also creates an interactive SSH session that lives the whole time I'm using the tunnel. Is there any way to tell SSH just to create the tunnel and not bother with the interactive session?

  Read the article

• Kernel-mode Authentication: 401 errors when accessing site from remote machines

  - by CJM

  I have several Classic ASP sites that use Integrated Windows Authentication and Kerberos delegation. They work OK on the live servers (recently moved to a Server 2008/IIS7 servers), but do not work fully on my development PC or my development server. The IIS on both machines were configured through an IIS web deployment tool package which was exported from an old machine; the deployment didn't work perfectly, and I had to tinker a bit to get the sites working. When accessing the apps locally on either machine, they work fine; when accessing from another machine, the user is prompted by a username/password dialog, and regardless of what you enter, ultimately it results in a 401 (Unauthorised) error. I've tried comparing the configuration of these machines against similar live servers (that all work fine), and they seem generally comparable (given that none of the live servers are yet on IIS7.5 (Windows 7/Server 2008 R2). These applications run in a common application pool which uses a special domain user as it's identity - this user has similar permissions on the live and development machines. On IIS6 platforms, to enable kerberos delegation, I needed to set up some SPNs for this user, and they are still in place (even though I don't believe they are needed any longer for IIS7+ due to kernel-mode authentication), Furthermore, this account is enabled for Kerberos delegation in Active Directory, as is each machine I am dealing with. I'm considering the possibility that the deployment might have made changes/failed to make changes to the IIS configuration thus causing this problem. Perhaps a complete rebuild (minus another web deployment attempt) would solve the problem, but I'd rather fix (thus understand) the current problem. Any ideas so far? I've just had another attempt at fixing this issue, and I've made some progress, but I don't have a complete fix...yet. I've discovered that if I access the sites via IP address (than via NetBIOS name), I get the same dialog, except that it accepts my credentials and thus the application works - not quite a fix, but a useful step. More interestingly, I discovered that if I disable Kernel-mode authentication (in IIS Manager Website Authentication Advanced Settings), the applications work perfectly. My foggy understanding is that this is effectively working in the pre-IIS7 way. A reasonable short-term solution, but consider the following explicit advice from IIS on this issue: By default, IIS enables kernel-mode authentication, which may improve authentication performance and prevent authentication problems with application pools configured to use a custom identity. As a best practice, do not disable this setting if Kerberos authentication is used in your environment and the application pool is configured to use a custom identity. Clearly, this is not the way my applications should be working. So what is the issue?

  Read the article

• Show command prompt on reboot

  - by LinuxPenseur

  Hi, In one of my linux machines, when i give reboot command at the shell command prompt then press enter, i get another command prompt and then the system reboots. $reboot $ But in one of my office Linux machines, when i give the reboot command, it suddenly reboots without showing another shell command prompt What could be the reason for this? I need the first behavior to be present in my office machine also. Kindly tell me where i should tweak my office machine. Thanks

  Read the article

• How to disable the annoying pop-up window after automatic updates are installed

  - by Mehper C. Palavuzlar

  I'm running Windows XP SP3. After automatic updates are installed, there shows up an annoying pop-up window every 10 minutes that tells me whether I want to restart the machine now or later. This interrupts my work as it pops up in the middle of an important process. I don't want to disable automatic updates. I just want to disable this annoying pop-up window and restart the machine without having to see this warning. Thanks.

  Read the article

• Ubuntu 9.10 Internet not working

  - by Mr. Man

  I am using a BlueProton USB wireless network adapter and an Ubuntu 9.10 machine and the machine says that it is connected to the internet but it won't see other machines/devices on the local network and only a few websites work.

  Read the article

• Server 2012 intermittently fails to respond to pings from single host, even with firewall disabled, but responds to non-ICMP requests fine

  - by James Westbury

  This one is kind of weird. I've got the following machines involved: DC01 - 10.1.2.42, Server 2012, domain controller & DNS server, physical machine nagiosv - 10.1.2.35, CentOS 6.4, Nagios, virtual machine CB01 - 10.1.3.81, Ubuntu 12.04 LTS, couchbase server, virtual machine So, I noticed something was wrong while configuring this new Nagios VM. I started seeing DC01's state flapping. I logged into nagiosv when I saw this happening, and attempted to ping DC01, both by FQDN and its IP address. Neither worked. I tried pinging the machine from CB01, which is another VM on the same virtual switch/physical NIC as nagiosv, and that worked fine. Pings still failing from nagiosv at this time. DC01 is also an internal DNS server, so I ran dig google.com from nagiosv, and was able to run a query against DC01 just fine: ;; Query time: 1 msec ;; SERVER: 10.1.2.42#53(10.1.2.42) ;; WHEN: Fri Nov 1 07:53:51 2013 ;; MSG SIZE rcvd: 204 Pings still failing from nagiosv, though. I can ping from DC01 to nagiosv, and that works, and I can still ping from other VMs on the same physical NIC into DC01, and that works. I should mention at this point that I've disabled the firewall on DC01 for testing purposes, and it doesn't make a damned bit of difference. (Even with the firewall enabled, I have a blanket exception for ICMP from the local subnet, so it shouldn't make a difference, but I figured I should test it anyway.) I loaded up Wireshark on DC01 and pinged it from nagiosv again. What I see is a bunch of echo requests coming in and not a single reply going back out. Filtered results here, showing all ICMP traffic during a 15-second period. A few more bits of info: There are no IP conflicts on the network. MAC addresses on the incoming pings match the MAC on the VM. There are no duplicate MACs on the network, as far as I can see. I have absolutely no idea why DC01 is failing to respond, here. Any ideas?

  Read the article

• Steps to diagnose performance bottlenecks on Mac OS X

  - by Dave Cahill

  If you wanted to track down performance issues on a machine running Mac OS X and find out what was causing slowdowns, which command-line or graphical tools would you use, and how would you use them? I'm interested in advice on the best tools, and explanations of how to use them - when a machine slows down or freezes up, I'd like to be able to dig down and understand what's going on, memory / disk / CPU-wise. Thanks.

  Read the article

• Setting Up a Virtual Sound Device To Stream Output via TCP/IP

  - by Martindale

  I'm interested in installing a custom driver / device that will open a socket (or listen) and stream audio via TCP/IP in both Windows and Linux. I would like to be able to specify this device as my "Output" for specific applications so that I can route my audio through a completely unique machine (for example, in complex Synergy setups where my headphones might be connected to one machine, but audio is being generated by another.) In Linux, I expect this to be very easy, but I anticipate having to install a custom driver in Windows.

  Read the article

• Upgrading RAM on a P4 2.8GHz with P4G8X+ ASUS mobo?

  - by iftrue

  I want to upgrade the RAM on an old machine with a P4G8X+ motherboard. Currently, it has 2 512 DDR PC2700 sticks. What's the best RAM I can use on this machine? I'm trying to upgrade my brother's old computer. Help?

  Read the article

• Windows 7 Home hangs at "Welcome" screen

  - by White Phoenix

  I'm asking on behalf of a friend who's currently having problems with his machine. Windows 7 Home 32-bit. He's too far away for me to help by going over to his house - I'm helping him over the Internet. This is his current machine: http://www.newegg.com/Product/Product.aspx?Item=N82E16883227134 The only two changes he made to that machine is to swap out the gfx card for a EVGA GTX 460 and the PSU for a Corsair TX650. Here's what happened: He was playing a computer game (fairly CPU/GPU intensive) and had some music going in the background in foobar while playing. Suddenly, he notices the music stopped playing, so he switches to foobar to try to close it, but it freezes up (window won't respond). So he figures it's just foobar having a bad day and force quits that program. Suddenly, his game won't respond, so he force quits that, then the entire computer just went to crap at that point, so he hits the restart button on his machine. Computer POSTS fine, but now he gets stuck at the Windows "welcome" screen (his account is set to auto-login). HD activity light is solid yellow but he doesn't hear HDD activity. He tried booting into Safe Mode - gets stuck at the "welcome screen". Tried a STartup Repair within Windows 7, it found a few problems, but still gets stuck at welcome. I advised him to boot off the DVD - sfc /scannow found nothing (couldn't use the regular /scannow option; says there's a repair pending, had to use use offbootdir/offwindir command switches). Ran startup repair 3 times - found nothing. My friend runs virus/malware scans on a regular basis, so he's fairly sure it's not that either. Right now I'm having my friend run chkdsk /R on the computer while in this Startup Recovery mode - so far it's caught a few bad sectors. However at this point I'm kinda wondering which way to go if chkdsk doesn't fix it. Quick Google search said someone had success by booting Windows with bootlogging on - some others have success with running the aforemented chkdsk, etc. The fact that Windows cannot even boot into Safe Mode concerns me. While we're waiting for chkdsk /R to finish, are there any other options I can give my friend short of reinstalling Windows 7? He has his data on a separate partition so that's not a major problem (though it'll be an annoyance for him). I suspect his hard drive may be having some issues, but my main concern is getting him back up and running before we start diagnosing the hard drive (I may have him run some sort of SMART test utility later).

  Read the article

• NFS access from multiple networks

  - by Luke

  On my NFS server (Ubuntu) I have in /etc/exports the following: /share 192.168.89.1/24(rw,no_root_squash,async) However, I have a new machine which is not in 192.168.89.* IP range, it's in 192.168.92.* instead. How can I make this machine access my NFS server?

  Read the article

• Virtual Hard Drive not booting - VMWare

  - by Chloraphil

  I have a .vmdk (VMWare hard disk) file that I cannot use as the lone disk in a new virtual machine. If I attach it to an existing virtual machine then it works fine. It has Windows Server 2003 on it. When I attempt to boot the new VM it attempts a network boot. EDIT: VMWare Workstation 6.5 I could not find a PXE option in the settings, and I did look in the VM config file for "PXE" but did not find one.

  Read the article

• Moved files only opening as 'read-only' in Excel

  - by Lance Roberts

  I moved a large directory of Excel files to another machine. When I sign in as myself (administrator signing into domain) then the files open just fine, but when I sign in as a Power User directly onto the machine, the files open as 'Read-Only'. I've reset all the attributes through both Windows and DOS, but to no avail. Also I checked on the Search Indexing bug, but indexing is already turned off. Any ideas?

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >