Search Results

Search found 62172 results on 2487 pages for 'windows networking'.

Page 158/2487 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by jao

  On a windows 2003 server I can nslookup www.google.com which returns Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: www.l.google.com Addresses: 74.125.79.104, 74.125.79.147, 74.125.79.99 Aliases: www.google.com I can then ping 74.125.79.104: Pinging 74.125.79.104 with 32 bytes of data: Reply from 74.125.79.104: bytes=32 time=16ms TTL=54 Reply from 74.125.79.104: bytes=32 time=32ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Ping statistics for 74.125.79.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 32ms, Average = 19ms But I cannot ping www.google.com: Ping request could not find host www.google.com. Please check the name and try again. (this one is different from the other question in that this one has a TLD, it is not a local domain.) Update: I am running a dns server at localhost (127.0.0.1). Even when I change it to use for example opendns, it still can nslookup hostname and ping ip address, but not ping hostname. So what is wrong? Update 2: here is the ipconfig /all result: Windows IP Configuration Host Name . . . . . . . . . . . . : SERVER Primary Dns Suffix . . . . . . . : NETWORK.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : NETWORK.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-0F-1F-56-3B-AA DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.7.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.7.1 DNS Servers . . . . . . . . . . . : 127.0.0.1 Update 3: Thanks everyone for their help and suggestions. I appreciate that. Ipconfig /flushdns returns: Sucessfully flushed the DNS resolver cache Ipconfig /displaydns returns: 2.7.168.192.in-addr.arpa ---------------------------------------- Record Name . . . . . : 2.7.168.192.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : webserver.mydomainname.com 1.0.0.127.in-addr.arpa ---------------------------------------- Record Name . . . . . : 1.0.0.127.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : localhost Update 4: Wireshark shows the following: 3 11.540542 208.67.220.220 192.168.7.2 DNS Standard query response A 74.125.79.99 A 74.125.79.104 A 74.125.79.147 6 42.056794 192.168.7.2 192.168.7.255 NBNS Name query NB WWW.GOOGLE.COM<00> which is weird: when I ping, it sends a packet to 192.168.7.255 instead of asking the DNS server for an address

  Read the article

• Making the iPhone work with stripped down Windows XP

  - by Gabriel

  Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

  Read the article

• Word documents very slow to open over network, but fine when opened locally - on one machine

  - by Craig H

  Windows XP, Word 2003, patched. The issue is happening with several Word documents stored on a network drive. The Word documents are clearly a bit wonky (i.e. one is 675k, but if you copy everything but the last paragraph marker into a new document, the new document is only 30k). But that's only part of the problem. On one weird machine, and one machine only, it takes ~20 seconds to open these Word documents from the network drive. Copy the file to C: on that werid machine? Opens immediately. Go to other machines (that are very similar - same patch level, etc.) and open the same document from the network? Opens immediately. Delete normal.dot? 20 seconds. Login with a different user on the weird machine? 20 seconds. Plug wonky machine into a different network port? 20 seconds. So the problem appears to be hardware related (i.e. wonky internal NIC) or related to a setting that is not profile specific. Any ideas? "Scrubbing" all the documents isn't ideal for several reasons. This is driving me nuts because I swear I ran into this before many years ago and eventually figured it out. But I appear to have lost my notes.

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Squid, authentication, Outlook Anywhere, Windows 7 and HTTP 1.1 = NIGHTMARE

  - by Massimo

  I'm running a Squid proxy (latest version, 3.1.4) on Linux CentOS 5.4 with Samba 3.5.4, in order to allow authenticated web access for domain users; everything works fine, and even Windows 7 clients are fully supported. Authentication is transparent for domain users, while it is explicitly requested for non-domain ones, and it works if the user can provide valid domain credentials. All nice and good. Then, Outlook Anywhere kicks in and pain and suffering ensue. When Outlook (be it 2007 or 2010, it doesn't matter) runs on Windows XP clients, it connects gracefully through the Squid proxy to its remote Exchange server. When it runs on Windows 7, it doesn't. If the authentication requirement is lifted from the proxy, everything works on Windows 7 too, so the problem is obviously related to NTLM authentication with Squid. Digging more deeply (WireShark), I discovered Outlook Anywhere uses HTTP 1.1 when it runs on Windows 7, while it uses HTTP 1.0 when on Windows XP. And it looks like Squid, even in its latest incarnation, still has some serious troubles handling HTTP 1.1 properly, particularly when SSL and proxy authentication are thrown in the mix. While waiting for Squid to fully and officially support HTTP 1.1 (and it looks like this could take quite a long time), I'm looking for one of the following solutions: Make Squid handle this correctly, if it is at all possible. Identify Outlook Anywhere connections and have Squid not require authentication for them. But it isn't easy: again, the behaviour of Outlook differs when running on Windows XP and Windows 7, and while on Windows XP Outlook sends a really nice user-agent string of "MSRPC", on Windows 7 it doesn't send any (why? WHY?!?). Force Outlook Anywhere to use HTTP 1.0 even when running on Windows 7. And no, this is not as simple as deselecting "use HTTP 1.1" in Internet Explorer, looks like Outlook ignores that setting and chooses on its own which protocol to use. Any other feasible solution which doesn't involve whitelisting specific destination Exchange servers, which is the last-resort solution I'm trying to avoid.

  Read the article

• Why does the file date always change to the current date?

  - by Marshall

  We are a programming shop, but this i snot a programming question. My boss has put an external HD on the network. It contains the 'home' folders for users on the network. He uses it to place VB projects that he wants me to work on. But no matter what date and time he places a project on the drive, the file dates(modified) always shows the current date, though nothing in the files have changed. It makes it very hard to confirm that he has given me the latest versions. (He is not a fan of version control and nothing I do will convince him different.) Any ideas why this happens and how to prevent it from happening? P.S. As I wrote this I decided to add the last accessed date to the file display, and those dates happen to show the dates I expect to see. Why is the modified date getting changed, but not the accessed date. Does the accessed date change only when the files are opened or read, changed or not? Note: I use Directory Opus 9, a replacement for windows file browser. Thanks, Marshall

  Read the article

• Two instances of Windows Vista on boot up after failed clean install

  - by Dwayne

  I tried to install a clean version of Vista but failed. I ended up with Windows and Windows.old on my C: drive and a dual boot option on boot up. I gave up and booted up the old version and tried to rename the Windows.old to Windows and was asked if I wanted to merge the two folders. I answered yes and all seemed OK until I booted up this morning and was given the choice of two versions of Vista. The first one is the one that failed to installed correctly and the second one is the old version. How can I get rid of the failed installation? I got rid of the bad boot via MSCONFIG. Here is my current situation: several hard drives installed Using C: as my boot drive a much larger drive (H:) for storing most of my files. I found a subfolder in my C:\windows folder named windows. Upon inspection I determined it to be older than the C:\windows folder and therefore it must be the older, working version of the boot. I renamed the C:\windows folder to c:\windows.bad and moved the sub windows to the C: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the C:\ copy and can I delete the C:\windows.bad file set?

  Read the article

• Cannot access host from a virtualbox guest using bridged adapter

  - by David Dai

  I have a windows 7 host with firewall turned off. And I have a windowsXP guest running on Virtualbox 4.2.4r81684. In my windowsXP guest I tried to connect to the FTP server on my host machine(which used to work well) but it didn't work. I tried to ping my host machine, but it didn't work either. Then I tried to ping my guest from host, it worked well. my guest ip is :192.168.1.95 my host ip is : 192.168.1.9 route table on guest machine is this: C:\Documents and Settings\wenlong>route PRINT =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...08 00 27 66 54 6c ...... AMD PCNET Family PCI Ethernet Adapter #2 - Packe t Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.95 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.95 192.168.1.95 20 192.168.1.95 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.1.255 255.255.255.255 192.168.1.95 192.168.1.95 20 224.0.0.0 240.0.0.0 192.168.1.95 192.168.1.95 20 255.255.255.255 255.255.255.255 192.168.1.95 192.168.1.95 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None arp cache is this: C:\Documents and Settings\wenlong>arp -a Interface: 192.168.1.95 --- 0x2 Internet Address Physical Address Type 192.168.1.1 00-26-f2-60-3c-04 dynamic 192.168.1.9 90-e6-ba-c2-90-2f dynamic It's strange because there was no problem days before and I didn't make any changes to the setting. could anybody help? PS. the guest can communicate with other machines in the LAN(for example 192.168.1.114) ok. it just cannot connect to the host machine.

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I understand this question is a bit out of the norm for stackoverflow, but I've run out of ideas. Thank you for any help you can provide.

  Read the article

• ProCurve 1800 switch issue

  - by user98651

  I recently deployed ProCurve 1800-24G switches in place of some older ProCurve 2424M switches in my network. However, I'm having a serious problem with the switch connected to the router. It seems, every night when our Windows 2008 R2 server (off site) runs a backup to a iSCSI target (on site) [facilitated through a PPTP tunnel] the LAN loses connectivity with the router. To clarify, there is only one router which is connected to the switch affected by this problem. The only way to resolve the issue is to either reboot the router or pull the ethernet cable that goes to the router and plug it back in. During the outage, clients cannot receive DHCP requests, DNS requests, ping, or do anything else with the router in this state. Now, neither the switch or router are configured extensively and the issue only seems to have surfaced with the new switch in place. I have tried a number of things including replacing cables, rebooting and checking the switch configuration (it is literally as basic as you can get at this point-- flat LAN, no trunking). Interestingly, the router shows (accessed externally) no changes in configuration or status during this state but similarly cannot ping or access other hosts on the network. This issue occurs in different stages of backup (ie, different amounts transferred). I've also dumped packets from the switch into WireShark but cannot seem to find any anomaly yet (I'm looking at packets around the time the issue appeared and at the time when I reset the NIC). Any suggestions for what to look for? Ideas on what could be causing this? I'm seeing some transmit/receive errors on the NIC from both the router and switch side but nothing serious when compared to the total packet counts. I'm seriously doubting hardware at this point, as I have tried another switch, different cables, and a different NIC on the router.

  Read the article

• Internet doesn't work when enable local network

  - by rakesh yadav

  We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: Lan A) WAN interface (192.168.51.50) ( Used for internet) Lan B) LAN interface (192.168.30.228) ( used for local connectivity ) When I keep both LAN Enabled than my internet doesn't work, but if I disable my local LAN then internet works fine. How can I resolve this issue? Do I need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

  Read the article

• How do I get a Wireless N PCi card to connect to a wireless G router?

  - by Andy

  I'm having some problems setting up a new wireless PCI card on a WinXP SP3 PC. I know that the router is configured correctly. It is a Linksys WRT54GL, using 802.11b/g. Security mode is WPA2 Personal with TKIP+AES encryption. I am able to connect to this fine using my laptop (first gen MacBook with a 802.11b built in card). The new PCI card is also Linksys, but it supports 802.11n. Card seems to be installed ok (Windows sees it fine, doesn't list any errors in Device Manager), however when it scans for available wireless networks it can't find my wireless network (the router is set to broadcast the SSID). I tried to enter the network SSID manually, but that didn't seem to help. I chose WPA2-PSK for network authentication. The only options for encryption are TKIP or AES - I've tried both, neither worked. I am sure that I typed in my wireless key correctly. At this point, I don't think the problem is with encryption, but something else. It almost seems like I need to switch the wireless card into g mode, but I haven't found a way to do that (if that is even possible/necessary - I thought n was fully backwards compatible with g). Also, the PC is in the same room as the router, and my laptop, so I don't think that it is an interference issue. Any ideas what I'm doing wrong? I'm running out of things to try at this point. :(

  Read the article

• Map FTP folder to folder on different FTP server

  - by jolt

  In my team we work a lot with FTP. We upload and download files from several different servers daily. Currently every member of the team manages access credentials to each FTP server locally on their own machine. I am looking for a way to set up a central FTP server that we can connect to, and from there, navigate to folders that each represent one of the other FTP servers that we connect to daily. Something like this: In-house central FTP server: |- FolderA --> server A root folder |- FolderB --> server B root folder |- FolderC --> server C root folder A setup like this, would mean that we can manage access credentials on the central FTP server, and team members would only need to have the access credentials to the central FTP server, and from there they could navigate to the other servers through these "virtual" folders. We could potentially develop our own custom FTP server that just forward requests to the remote FTP servers, but i feel like something like this (or something similar) would already have been done. So I'm looking for pointers that could help us find software for Windows that could help us to simplify our current setup. Thank you! Similar (unanswered) question here: FTP management server

  Read the article

• Why do I often have to refresh pages I navigate to once for them (or content in them) to load?

  - by GetOutOfBox

  I have noticed a bizarre pattern when using my PC, that when I open a link to a website, it often will often take a very long time to load, or time out. Sometimes content on the website will be drawn, but again, it seems to get "stuck" for an unusual amount of time before finishing. Most affected is Youtube; almost every time I navigate to a youtube video from another website such as Google, the video will not begin playing, but will instead just display the player controls with a black screen where the video should be and the buffering symbol, usually before displaying an error such as "The video failed to load". The unusual part of this problem is that whenever this happens, refreshing the page always causes it to load almost immediately the second time around, without any problems. Note that I'm not talking about how some browsers will dump whatever has been cached to the "pallet" briefly when the page is refreshed or loading stopped; but that the second time loading the website being faster. I have done my best to rule out some of the obvious causes: My Windows 7 desktop computer is the only device that seems to be affected. I use Firefox on it (latest version, flash updated, etc). My connection has more than enough bandwidth (30 megabits down, 4 up), and I've even tried QoSing all other devices to make sure this isn't happening due to usage spikes. Wireshark is not showing any clearly unusual network activity (i.e frequently dropped packets).

  Read the article

• URL sniffer/downloader

  - by Ricket

  Some websites have Flash content that plays music or videos. Most of the time they don't show you the URL of these music or videos, but for example, you can sniff a YouTube webpage and find the flv file that YouTube is actually requesting and playing. Right now I'm using Orbit Downloader, which has a feature called Grab++ that does just this; you start it, and then you refresh the page, and it shows you all files of certain types (image, audio, video) that the webpage requests, and then you can select one or more and download and it downloads them. But, I don't like Orbit, it installs plugins and has the whole download manager thing which I don't really want. What is a good alternative program? I'm not looking for websites like kickyoutube.com, I want a URL sniffer I guess. HTTPGuideDog used to be my Firefox add-on that did exactly this, but it hasn't been updated even to FF3 (and yes I know I can hack it to load anyway, I'm looking for something natively available preferably). I vaguely know of WireShark but last time I used it, I believe it captures individual packets, which is a little too fine-tuned for me. I just want to be able to see what's happening, and download something that the webpage downloaded. Oh, and I'm using Windows 7. Linux probably has some fancy command-line tool, but it just won't cut it for me. :-\ Edit: Oh, and something free please. Feel free to mention paid solutions though.

  Read the article

• How do i set up a fully featured small business network?

  - by JoshReedSchramm

  This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

  Read the article

• Internet doesn't work when enable local Lan

  - by rakesh yadav

  We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: B1) WAN interface (192.168.0.2) ( Used for internet) B2) LAN interface (192.168.1.2) ( used for local connectivity) when i keep both LAN Enabled than my internet doesn't work, but if I disabled my local Lan than internet working fine. so please help me how can resolved this issue or should i need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

  Read the article

• Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

  - by music2myear

  Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

  Read the article

• How can I unregister a service with dns-sd?

  - by Roman

  I am trying to use "dns-sd" command line tool on my Windows 7 machine. I can already do something. For example I can register a service using "dns-sd -R ...". I also can browser (see) registered services using "dns-sd -B ...". What I still miss, is how to unregister a service. At the moment when I type "dns-sd -R ..." the dns-sd does not return me to the command prompt. To return to the command prompt I need to press Ctrl-C. And the service stays registered till I press Ctrl-C. What I want is to run "dns-sd -R ..." in the background regime and then I would like to have a possibility to unregister a service from the command line. One more thing which I do not understand yet is what "to look up a service" means. In my picture it should be sufficient to register a service, to see it and then to unregister it. But apparently I need to look up a service. What does it mean and why I need to do it?

  Read the article

• Make case-sensitive SMB share case-insensitive

  - by fungs

  I am running a legacy XP app that I would like to move on a network share. It is very simple and works in theory but the server providing the share is based on Linux (cannot configure) and the software does not work correctly because it is programmed case-insensitively, it seems. After some research, network shares behave like the filesystem they use underneath. This is normal. Unfortunately I cannot fix the software myself. Is there any way to turn the case-sensitivity into case-insensitivity for a Windows network drive on the client side? I fould two approaches: First, something like icasefile (http://wnd.katei.fi/icasefile/) that wraps around the program and intercepts the file I/O. This is for UNIX only. Secondly, a proxy virtual file system (e. g. something using Dokan). Unfortunately I couldn't find any suitable fs, the only possibility would be to put a case-insensitive filesystem on an image file and put this on the share using for example lmdisk (http://www.ltr-data.se/opencode.html/#ImDisk). Do you have any better ideas?

  Read the article

• Vista laptop 1 connects to network but Vista laptop 2 doesn't

  - by Jaips

  (Sorry if this is a dulipcate. I did a hunt but couldn't find matching question) We recently got a new router for our network (thomson TG585v8). It was already pre-configured by the ISP and was easy to setup. Both Vista laptops in this home network connected without trouble as well a iPod touch, all via wifi. In the last two days one of the laptops has been unable to connect cleanly to the network (connects as unidentified network). The other laptop, and iPod have not had any issues. I can't think of anything that has changed to make this happen now. I have rebooted the laptop and the router. I have updated the laptop wireless driver I have checked the laptop is set to automatically get IP I have logged into the router which correctly identifies all three wireless devices. The problem laptop connects via LAN without issue. Some things that may or may not matter: The problem laptop also sometimes uses a 3G dongle Both laptops use Windows Live Mesh to sync folders Laptop is usually set to go to sleep NB: it seems this is an intermittent issue, after an hour (since i noticed it) it seems to have fixed itself. Would love ideas though to solve this problem for good.

  Read the article

• Wireless disconnects every 30 minutes

  - by Kez

  I have had a look through all the related questions and I get the feeling my problem is unique. My wireless connection disconnects every 30 minutes, for maybe 1 to 3 seconds. If I am browsing the web while it happens, I get the page cannot be displayed error message. I have checked the event logs as I was curious to know if there was anything in there. There is. Event 8033: BROWSER - The browser has forced an election on network \Device\NetBT_Tcpip_{B919CC30-25A9-45DD-A09F-549A6262FC9E} because a master browser was stopped. Reported exactly every 30 minutes which coincides with my wireless problem. I am running Windows 7 Ultimate, 32-bit. My wireless is Realtek RTL8187 integrated into a ASUS P5K-E/Wifi motherboard. It is on a workgroup and has never been on a domain. This problem does not affect any other computers. Wireless reception is great, and I have ensured that the wireless unit is transmitting on a frequency not used by any nearby wireless basestations. How can I fix this pesky problem?

  Read the article

• Bridging my laptop's wireless and wired adaptors

  - by stacey.richards

  I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

  Read the article

• Adding a Printer to my Print Server Failing

  - by Rudi Kershaw

  So, on the Windows Server page I read the following. Step 4: Add Network Printers Automatically Print Management (Printmanagement.msc) can automatically detect all the printers that are located on the same subnet as the computer on which you are running Print Management, install the appropriate printer drivers, set up the queues, and share the printers. To automatically add network printers to a printer server Open the Administrative Tools folder, and then double-click Print Management. In the Printer Management tree, right-click the appropriate server, and then click Add Printer. On the Printer Installation page of the Network Printer Installation Wizard, click Search the network for printers, and then click Next. If prompted, specify which driver to install for the printer. So, I have got to this point, made sure the printer (Canon MP620) is on and correctly plugged into the network. However, when I click "Search the network for printers", the wizard doesn't find it. Now, I can't get any further. Is there anything I could be doing wrong? How should I proceed moving forwards?

  Read the article

• Network card/driver stops under heavy load

  - by Uwe Keim

  Since about approx. 2 month, I do have the following issue with my approx. 1 year old development machine (Windows 7, 64 bit): When doing network intensive operations, like e.g. executing some SQL script on a remote SQL server to select or update 1000 of records, the network card stops working. I.e. suddenly, No network connection is present anymore. No internet, no local connection, simply nothing. The only resolution so far I found is to disable my network card and then simply enable it back, like in the following screenshots: 1.) Click "Deactivate" 2.) Click "Activate" (German screenshots only, sorry) Now this is an acceptable solution to work around this issue, but I would love to have this fixed, since it suddenly stops me from working when I'm connected remotely via VPN/RDP on my machine (Win7 64bit). So my question is: Could you imagine a possible cause for this issue and give some hints how to hunt/resolve it? I could imagine that this is a driver issue, a hardware issue or even some kind of background software issue like a software firewall or a virus scanner.

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >