sharepoint web services - Page 1585

What's going on with my server? High load, lots of idle CPU time, low disk utilization

- by Jonathan

I run a web site and send a legitimate opt-in, daily email newsletter to subscribers. Both the web hosting and email sending are done by the same machine. I have about 100,000 subscribers who have opted in to my daily email newsletter. My PHP script did a pretty good job sending mail to all of them until fairly recently, but as the list has grown I can't keep up. When I run top, I have very high load--usually at least 6 or 7, sometimes as high as 15--even though I only have two CPUs. However, when I run sar, my CPU is idle an average of about 30% of the time. So, it seems I'm not CPU bound. When I run iostat, it seems as though I'm not disk bound because my %util for each device is very low (no more than 5%). Given that I don't seem to be CPU bound or disk bound, why is top reporting such high load? Additionally, since I don't seem to be CPU bound or disk bound, why is my email sending script not able to keep up? Here's what I see when running top: top - 11:33:28 up 74 days, 18:49, 2 users, load average: 7.65, 8.79, 8.28 Tasks: 168 total, 5 running, 162 sleeping, 0 stopped, 1 zombie Cpu(s): 38.9%us, 58.6%sy, 0.8%ni, 0.0%id, 0.7%wa, 0.2%hi, 0.8%si, 0.0%st Mem: 3083012k total, 2144436k used, 938576k free, 281136k buffers Swap: 2048248k total, 39164k used, 2009084k free, 1470412k cached Here's what I see when running iostat -mx: avg-cpu: %user %nice %system %iowait %steal %idle 34.80 1.20 55.24 0.37 0.00 8.38 Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util sda 0.19 71.70 1.59 29.45 0.02 0.07 5.90 0.55 17.82 1.16 3.59 sda1 0.00 0.00 0.00 0.00 0.00 0.00 7.10 0.00 13.80 13.72 0.00 sda2 0.05 50.45 1.13 24.57 0.01 0.29 24.25 0.35 13.43 1.15 2.97 sda3 0.05 10.17 0.20 2.33 0.01 0.05 43.75 0.05 20.96 2.45 0.62 sda4 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 70.50 70.50 0.00 sda5 0.07 0.22 0.03 0.07 0.00 0.00 32.84 0.08 856.19 8.03 0.08 sda6 0.02 5.45 0.03 0.72 0.00 0.02 67.55 0.02 26.72 5.26 0.39 sda7 0.00 1.56 0.00 0.42 0.00 0.01 38.04 0.00 8.88 5.84 0.24 sda8 0.01 3.84 0.20 1.35 0.00 0.02 28.55 0.05 31.90 4.08 0.63 Here's what I see when running sar: 09:40:02 AM CPU %user %nice %system %iowait %steal %idle 09:50:01 AM all 30.59 1.01 49.80 0.23 0.00 18.37 10:00:08 AM all 31.73 0.92 51.66 0.13 0.00 15.55 10:10:06 AM all 30.43 0.99 48.94 0.26 0.00 19.38 10:20:01 AM all 29.58 1.00 47.76 0.25 0.00 21.42 10:30:01 AM all 29.37 1.02 47.30 0.18 0.00 22.13 10:40:06 AM all 32.50 1.01 52.94 0.16 0.00 13.39 10:50:01 AM all 30.49 1.00 49.59 0.15 0.00 18.77 11:00:01 AM all 29.43 0.99 47.71 0.17 0.00 21.71 11:10:07 AM all 30.26 0.93 49.48 0.83 0.00 18.50 11:20:02 AM all 29.83 0.81 48.51 1.32 0.00 19.52 11:30:06 AM all 31.18 0.88 51.33 1.15 0.00 15.47 Average: all 26.21 1.15 42.62 0.48 0.00 29.54 Here are the top handful of processes listed at the particular time I happened to run top -c: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 8180 mysql 16 0 57448 19m 2948 S 26.6 0.7 4702:26 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/bristno.pid --skip-external-locking 26956 brristno 17 0 0 0 0 Z 8.0 0.0 0:00.24 [php] <defunct> 26958 brristno 17 0 94408 43m 37m R 5.0 1.4 0:00.15 /usr/bin/php /home/brristno/public_html/dbv.php 22852 nobody 16 0 9628 2900 1524 S 0.7 0.1 0:00.17 /usr/local/apache/bin/httpd -k start -DSSL 8591 brristno 34 19 96896 13m 6652 S 0.3 0.4 0:29.82 /usr/local/bin/php /home/brristno/bin/mailer.php 1qwqyb6 i0gbor 24469 nobody 16 0 9628 2880 1508 S 0.3 0.1 0:00.08 /usr/local/apache/bin/httpd -k start -DSSL 25495 nobody 15 0 9628 2876 1500 S 0.3 0.1 0:00.06 /usr/local/apache/bin/httpd -k start -DSSL 26149 nobody 15 0 9628 2864 1504 S 0.3 0.1 0:00.04 /usr/local/apache/bin/httpd -k start -DSSL

Read the article

Using PHP to connect to RADIUS works on one server but not another

- by JDS

I have a fleet of webservers that server a LAMP webapp broken into multiple customer apps by virtualhost/domain. The platform is Ubuntu 10.04 VM + PHP 5.3 + Apache 2.2.14, on top of VMware ESX (v4 I think). This stuff's not too important, though -- I'm just setting up the background. I have one customer that connects to a RADIUS server for authentication. We've found that the app responds as if some number of web servers are configured correctly and some are not. i.e. Apparently random authentication failures or successes, with no rhyme or reason. I did a lot of analysis of our fleet, and resolved it down to the differences between two specific web servers. I'll call them "A" and "B". "A" works. "B" does not. "Works" means "connects to and gets authentication data successfully from the RADIUS server". Ultimately, I'm looking for one thing that is different, and I've exhausted everything that I can come up with, so, looking for something else. Here are things I've looked at PHP package versions (all from Ubuntu repos). These are exactly the same across servers. PECL package. There are no PECL packages that aren't installed by apt. Other libraries or packages. Nothing that was network-related or RADIUS-related was different among servers. (There were some minor package differences, though.) Network or hosting environment. I found that some of the working servers were on the same physical environment as some not-working ones (i.e. same ESX containers). So, probably, the physical network layer is not the problem. Test case. I created a test case as follows. It works on the working servers, and fails on the not-working servers, very consistently. <?php $radius = radius_auth_open(); $username = 'theusername'; $password = 'thepassword'; $hostname = '12.34.56.78'; $radius_secret = '39wmmvxghg'; if (! radius_add_server($radius,$hostname,0,$radius_secret,5,3)) { die('Radius Error 1: ' . radius_strerror($radius) . "\n"); } if (! radius_create_request($radius,RADIUS_ACCESS_REQUEST)) { die('Radius Error 2: ' . radius_strerror($radius) . "\n"); } radius_put_attr($radius,RADIUS_USER_NAME,$username); radius_put_attr($radius,RADIUS_USER_PASSWORD,$password); switch (radius_send_request($radius)) { case RADIUS_ACCESS_ACCEPT: echo 'GOOD LOGIN'; break; case RADIUS_ACCESS_REJECT: echo 'BAD LOGIN'; break; case RADIUS_ACCESS_CHALLENGE: echo 'CHALLENGE REQUESTED'; break; default: die('Radius Error 3: ' . radius_strerror($radius) . "\n"); } ?>

Read the article

How do I allow mysqld to use more than 24.9% of my cpu?

- by Joseph Yancey

I have a Web server running on RHEL that is running Apache and MySQL. It has a Quad core 3.2Ghz Xeon CPU and 8 Gigs of RAM Most of the time, we don't have any issues at all. Our web application is very database intensive. When our usage gets pretty heavy MySQL will peg out at using 24.9% of the cpu. Most of the time, it hangs around below 5%. I have speculated that it is only using one core of the CPU and it is pegging out that core but TOP shows me in the cpu column that mysqld changes cores even while the usage stays at 24.9%. When it does this MySQL gets painfully slow as it is queuing up queries Is there some magic configuration that will tell mysql to use more cpu when it needs to? Also, any other advice on my configuration would be helpful. We run two applications on this server. One that runs Innodb but doesn't get much usage (it has been replaced by the other app), and one that runs MyIsam and gets lots of use. Overall, our whole mysql data directory is something like 13Gigs if that matters at all. Here is my config: [root@ProductionLinux root]# cat /etc/my.cnf [mysqld] server-id = 71 log-bin = /var/log/mysql/mysql-bin.log binlog-do-db = oldapplication binlog-do-db = newapplication binlog-do-db = support thread_cache_size = 30 key_buffer_size = 256M table_cache = 256 sort_buffer_size = 4M read_buffer_size = 1M skip-name-resolve innodb_data_home_dir = /usr/local/mysql/data/ innodb_data_file_path = InnoDB:100M:autoextend set-variable = innodb_buffer_pool_size=70M set-variable = innodb_additional_mem_pool_size=10M set-variable = max_connections=500 innodb_log_group_home_dir = /usr/local/mysql/data innodb_log_arch_dir = /usr/local/mysql/data set-variable = innodb_log_file_size=20M set-variable = innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit = 1 log-queries-not-using-indexes log-error = /var/log/mysql/mysql-error.log mysql show variables; +---------------------------------+-----------------------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+-----------------------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 5 | | datadir | /usr/local/mysql/data/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | | ft_max_word_len | 84 | | ft_min_word_len | 4 | | ft_query_expansion_limit | 20 | | ft_stopword_file | (built-in) | | group_concat_max_len | 1024 | | have_archive | YES | | have_bdb | NO | | have_blackhole_engine | NO | | have_compress | YES | | have_crypt | YES | | have_csv | NO | | have_example_engine | NO | | have_federated_engine | NO | | have_geometry | YES | | have_innodb | YES | | have_isam | NO | | have_ndbcluster | NO | | have_openssl | NO | | have_query_cache | YES | | have_raid | NO | | have_rtree_keys | YES | | have_symlink | YES | | init_connect | | | init_file | | | init_slave | | | innodb_additional_mem_pool_size | 10485760 | | innodb_autoextend_increment | 8 | | innodb_buffer_pool_awe_mem_mb | 0 | | innodb_buffer_pool_size | 73400320 | | innodb_checksums | ON | | innodb_commit_concurrency | 0 | | innodb_concurrency_tickets | 500 | | innodb_data_file_path | InnoDB:100M:autoextend | | innodb_data_home_dir | /usr/local/mysql/data/ | | innodb_doublewrite | ON | | innodb_fast_shutdown | 1 | | innodb_file_io_threads | 4 | | innodb_file_per_table | OFF | | innodb_flush_log_at_trx_commit | 1 | | innodb_flush_method | | | innodb_force_recovery | 0 | | innodb_lock_wait_timeout | 50 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_arch_dir | /usr/local/mysql/data | | innodb_log_archive | OFF | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 20971520 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | /usr/local/mysql/data | | innodb_max_dirty_pages_pct | 90 | | innodb_max_purge_lag | 0 | | innodb_mirrored_log_groups | 1 | | innodb_open_files | 300 | | innodb_support_xa | ON | | innodb_sync_spin_loops | 20 | | innodb_table_locks | ON | | innodb_thread_concurrency | 20 | | innodb_thread_sleep_delay | 10000 | | interactive_timeout | 28800 | | join_buffer_size | 131072 | | key_buffer_size | 268435456 | | key_cache_age_threshold | 300 | | key_cache_block_size | 1024 | | key_cache_division_limit | 100 | | language | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/english/ | | large_files_support | ON | | large_page_size | 0 | | large_pages | OFF | | license | GPL | | local_infile | ON | | locked_in_memory | OFF | | log | OFF | | log_bin | ON | | log_bin_trust_function_creators | OFF | | log_error | /var/log/mysql/mysql-error.log | | log_slave_updates | OFF | | log_slow_queries | OFF | | log_warnings | 1 | | long_query_time | 10 | | low_priority_updates | OFF | | lower_case_file_system | OFF | | lower_case_table_names | 0 | | max_allowed_packet | 1048576 | | max_binlog_cache_size | 18446744073709551615 | | max_binlog_size | 1073741824 | | max_connect_errors | 10 | | max_connections | 500 | | max_delayed_threads | 20 | | max_error_count | 64 | | max_heap_table_size | 16777216 | | max_insert_delayed_threads | 20 | | max_join_size | 18446744073709551615 | | max_length_for_sort_data | 1024 | | max_relay_log_size | 0 | | max_seeks_for_key | 18446744073709551615 | | max_sort_length | 1024 | | max_sp_recursion_depth | 0 | | max_tmp_tables | 32 | | max_user_connections | 0 | | max_write_lock_count | 18446744073709551615 | | multi_range_count | 256 | | myisam_data_pointer_size | 6 | | myisam_max_sort_file_size | 9223372036854775807 | | myisam_recover_options | OFF | | myisam_repair_threads | 1 | | myisam_sort_buffer_size | 8388608 | | myisam_stats_method | nulls_unequal | | net_buffer_length | 16384 | | net_read_timeout | 30 | | net_retry_count | 10 | | net_write_timeout | 60 | | new | OFF | | old_passwords | OFF | | open_files_limit | 2510 | | optimizer_prune_level | 1 | | optimizer_search_depth | 62 | | pid_file | /usr/local/mysql/data/ProductionLinux.pid | | port | 3306 | | preload_buffer_size | 32768 | | protocol_version | 10 | | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | | range_alloc_block_size | 2048 | | read_buffer_size | 1044480 | | read_only | OFF | | read_rnd_buffer_size | 262144 | | relay_log_purge | ON | | relay_log_space_limit | 0 | | rpl_recovery_rank | 0 | | secure_auth | OFF | | server_id | 71 | | skip_external_locking | ON | | skip_networking | OFF | | skip_show_database | OFF | | slave_compressed_protocol | OFF | | slave_load_tmpdir | /tmp/ | | slave_net_timeout | 3600 | | slave_skip_errors | OFF | | slave_transaction_retries | 10 | | slow_launch_time | 2 | | socket | /tmp/mysql.sock | | sort_buffer_size | 4194296 | | sql_mode | | | sql_notes | ON | | sql_warnings | ON | | storage_engine | MyISAM | | sync_binlog | 0 | | sync_frm | ON | | sync_replication | 0 | | sync_replication_slave_id | 0 | | sync_replication_timeout | 10 | | system_time_zone | CST | | table_cache | 256 | | table_lock_wait_timeout | 50 | | table_type | MyISAM | | thread_cache_size | 30 | | thread_stack | 262144 | | time_format | %H:%i:%s | | time_zone | SYSTEM | | timed_mutexes | OFF | | tmp_table_size | 33554432 | | tmpdir | | | transaction_alloc_block_size | 8192 | | transaction_prealloc_size | 4096 | | tx_isolation | REPEATABLE-READ | | updatable_views_with_limit | YES | | version | 5.0.18-standard-log | | version_comment | MySQL Community Edition - Standard (GPL) | | version_compile_machine | x86_64 | | version_compile_os | unknown-linux-gnu | | wait_timeout | 28800 | +---------------------------------+-----------------------------------------------------------------------------+ 210 rows in set (0.00 sec)

Read the article

Exchange Server 2007 Send and Receive Connectors

- by Mistiry

I have gotten awesome advice from users on here for getting Exchange on Windows SBS 2008 set up. I think this is the final piece and I'm ready for roll-out! I need to set up Exchange so that it RECEIVES mail from our existing mail server as a Forward [aliases on the existing mail server to forward mail from [email protected] to [email protected]] (not using the POP3 Connector), and SENDS mail through that server as well (sends from [email protected] to [email protected] and then out to the world, showing in the headers as from [email protected] or at absolute least have the reply-to set as this). Alternatively, as long as the .net email address doesn't show in the From and replies are directed to the .com account, email can go from Exchange to the outside world without directing through the existing mail server. External Domain: domain.com Internal Domain: domain.local Internet Domain Name Set in SBS Console: domain.net When I go to http://remote.domain.net I get the Remote Web Workspace, and can login to both Sharepoint and OWA. I can send an email from OWA to a GMail account. I receive it from [email protected], which is an alias of [email protected]. I cannot, however, send an email from OWA to ANY domain.com email addresses. I am also not receiving any email to this Exchange account (except for NDRs). When I try sending an email to a domain.com account, here is the error (I had to replace all < and with { and }): Delivery has failed to these recipients or distribution lists: [email protected] The recipient's e-mail address was not found in the recipient's e-mail system. Microsoft Exchange will not try to redeliver this message for you. Please check the e-mail address and try resending this message, or provide the following diagnostic text to your system administrator. Generating server: IFEXCHANGE.domain.local [email protected] #550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ## Original message headers: Received: from IFEXCHANGE.domain.local ([fe80::4d34:abc5:f7fd:e51a]) by IFEXCHANGE.domain.local ([fe80::4d34:abc5:f7fd:e51a%10]) with mapi; Tue, 17 Aug 2010 14:14:14 -0400 Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: binary From: John Doe {[email protected]} To: "[email protected]" {[email protected]} Date: Tue, 17 Aug 2010 14:14:12 -0400 Subject: asdf Thread-Topic: asdf Thread-Index: AQHLPjf+h6hA5MJ1JUu1WS4I4CiWeA== Message-ID: {E4E10393768D784D8760A51938BA456A029934BA30@IFEXCHANGE.domain.local} Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: {E4E10393768D784D8760A51938BA456A029934BA30@IFEXCHANGE.domain.local} MIME-Version: 1.0 I hope I explained the situation well enough for someone to be able to explain to me what I'm missing. If I could, I'd be putting a 10K bounty, but unfortunately I've got only 74 reputation (hey, I'm a newbie here!). I'm pretty sure the obvious "RecipNotFound" error is why its not working, my question is how to resolve this. The email account exists, it receives mail just fine, yet when I send it from the Exchange server it fails. EDIT In OC-Hub Transport, the Email Address Policies has 2 entries. "Windows SBS Email Address Policy" is set up to: Include All Recipient Types, no conditions, and SMTP %[email protected]. "Default Policy" set to: Include All Recipient Types, no conditions, and SMTP @domain.net. Three Authoritative Accepted domains domain.com domain.local (Default) domain.net Remote Domains tab has two entries. Default with domain * Windows SBS Company Web Domain with domain companyweb.

Read the article

The Complete List of iPad Tips, Tricks, and Tutorials

- by Ross

The Apple iPad is the latest new toy, and we’ve put together a comprehensive list of every tip, trick, and tutorial that we could find to help you get the most out of it—and we’re even giving one away to one lucky reader. So read on! Note: We’ll be keeping this page updated as we find more great articles, so you should bookmark this page for future reference. Want Your Own iPad? How-To Geek is Giving One Away! All you have to do to enter is become a fan of our Facebook page, and we’ll pick a random fan to win the prize. Win an iPad on the How-To Geek Facebook Fan Page Disable the “clicking sound” on the iPad Keyboard Does the clicking sound when you tap the iPad keyboard bother you? Thankfully it’s easy to disable with a couple of taps. How to disable the “clicking sound” on your iPad’s keyboard Enable and add bookmarks to the Safari Bookmarks Bar on your iPad By default, Safari doesn’t display the Bookmarks Bar. This tip shows you how to change that. How to enable and add bookmarks to the Safari Bookmarks Bar on your iPad Clear the Cache, History and Cookies in Safari for the iPad You’re probably used to clearing this kind of data right from within the browser. Not so with Safari on the iPad – but here’s how you can. How to clear the cache, history and cookies in Safari for iPad How to add more Apps to your iPad Dock The iPad has four icons in its ‘dock’. Did you know it can hold 6? How to add more Apps to your iPad Dock Convert PDF files to ePub files to read on your iPad with iBooks ePub is the format that iBooks are in. So for those of you with large eBook collections in PDF, here’s how you convert them to read in iBooks. How to convert PDF files to ePub files to read on your iPad with iBooks How to force your iPad to restart Has an app caused your iPad to freeze up, and you can’t escape? This tip shows you how to force your iPad to restart. How to force your iPad to restart How to export Keynote for iPad presentations to your Mac or PC Exporting Keynote presentations from your iPad to your Mac or PC isn’t as straight forward as you might have expected. This tutorial shows you how. How to export Keynote for iPad presentations to your Mac or PC How to import presentations to Keynote on your iPad Having trouble getting your presentations onto your iPad? How to import presentations to Keynote on your iPad How to import documents to Pages on your iPad This guide shows you how to transfer documents (MS Word or Pages) from your Mac/PC to your iPad. How to import documents to Pages on your iPad How to insert photos in a Pages document using iPad and share it as a PDF Want to spice up that doc with a picture you just took? This tutorial will show you how – and how to export that document as a PDF. How to insert photos in a Pages document using iPad and share it as a PDF How to lock your iPad If you have kids or co-workers/friends who think it’s funny to mess with your iPad – lock it. How to lock your iPad How to remove the “Sent from my iPad” signature from outgoing email on your iPad Does everyone need to know you just sent that email from your iPad? Probably not. This guide shows you how to remove the “Sent from my iPad” signature and replace it with your own (or none). How to remove the “Sent from my iPad” signature from outgoing email on your iPad How To Sync Multiple Calendars to the iPad With Google Sync This tutorial will show you a workaround on how to sync multiple calendars on your iPad using Google Sync. How to Sync Multiple Calendars to the iPad With Google Sync How to determine the MAC address of your iPad If your network restricts connections via MAC address – this guide will show you how to determine what yours is. How to determine the MAC address of your iPad How to take a screenshot of your iPad Do you need to take a screenshot of your iPad? This quick tip shows you how to do just that. How to take a screenshot of your iPad How to delete apps from your iPod Touch, iPhone or iPad Anyone who had an iPod Touch or iPhone before they had an iPad won’t need this tutorial. But if you’re new to the experience, this one will help. How to delete apps from your iPod Touch, iPhone or iPad How to determine the iPad ECID on Windows and Mac iPadintosh shows us how to determine the iPad’s ECID code – something you’ll want to have come Jailbreak time. How to grab the iPad ECID in Windows or OS X iPad Apps: Twitter and social networking essentials Enggadget has you covered with reviews of the first slew of iPad specific Twitter and other social networking apps. iPad Apps: Twitter and social networking essentials What does your website look like on an iPad? iPad Peek is a web based tool that allows you to enter any given URL, and it will display that page the same way Safari on the iPad does. Great for web site owners who don’t have access to an iPad. iPadPeek Stream Music and Videos to your iPad Gizmodo reviews the iPad app StreamToMe, which allows you to stream media from your Mac to your iPad across your local network. Their feelings in a nutshell – worth the $3, but not perfect. Review: StreamToMe for the iPad Apple iPad : Change links in Google Reader to point to full HTML webpage How to change links in Safari for iPad so that Google Reader points to a full HTML webpage How to connect an iPad to your existing wireless keyboard This video will show you how to connect your iPad to a wireless keyboard if you’re having any problems – and from the sound of things, quite a few folks are. via TUAW How to get started with the iPad Mashable has a very entry-level guide that will help you set up your iPad for the first time. Mashable’s Guide to Setting up the iPad Essential iPad Apps Downloadsquad gives mini-reviews to 8 iPad apps that you should install as soon as you get your iPad. iPad App Buyers Guide: Essential Apps you should get on day one Videos: The Official iPad Guided Tours From none other than Apple! Great getting started videos for all the included iPad apps. The Official iPad Guided Tours The Official iPad Manual When you buy an iPad, you don’t get a manual. But that’s not to say there isn’t one. Apple provides a 150 guide for your iPad in PDF format. The Official iPad Manual (pdf) How to print from your iPad Sure, it’s actually just an App (PrintCentral – $9.99 USD), but as of right now, it’s the only way. PrintCentral How to make your own iPad Wallpaper A perfectly detailed tutorial on how to make your own wallpaper for your iPad. The author also provides a really nice sample wallpaper, published under the Attribution-Noncommercial 2.0 Generic license. How to make your own iPad Wallpaper Got any more tips? Share them in the comments, and we’ll update the post with the links, or just the tip itself. Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]Clear the Auto-Complete Email Address Cache in OutlookAsk the Readers: Share Your Tips for Defeating Viruses and MalwareStupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos

Read the article

HttpContext.Items and Server.Transfer/Execute

- by Rick Strahl

A few days ago my buddy Ben Jones pointed out that he ran into a bug in the ScriptContainer control in the West Wind Web and Ajax Toolkit. The problem was basically that when a Server.Transfer call was applied the script container (and also various ClientScriptProxy script embedding routines) would potentially fail to load up the specified scripts. It turns out the problem is due to the fact that the various components in the toolkit use request specific singletons via a Current property. I use a static Current property tied to a Context.Items[] entry to handle this type of operation which looks something like this: /// <summary> /// Current instance of this class which should always be used to /// access this object. There are no public constructors to /// ensure the reference is used as a Singleton to further /// ensure that all scripts are written to the same clientscript /// manager. /// </summary> public static ClientScriptProxy Current { get { if (HttpContext.Current == null) return new ClientScriptProxy(); ClientScriptProxy proxy = null; if (HttpContext.Current.Items.Contains(STR_CONTEXTID)) proxy = HttpContext.Current.Items[STR_CONTEXTID] as ClientScriptProxy; else { proxy = new ClientScriptProxy(); HttpContext.Current.Items[STR_CONTEXTID] = proxy; } return proxy; } } The proxy is attached to a Context.Items[] item which makes the instance Request specific. This works perfectly fine in most situations EXCEPT when you’re dealing with Server.Transfer/Execute requests. Server.Transfer doesn’t cause Context.Items to be cleared so both the current transferred request and the original request’s Context.Items collection apply. For the ClientScriptProxy this causes a problem because script references are tracked on a per request basis in Context.Items to check for script duplication. Once a script is rendered an ID is written into the Context collection and so considered ‘rendered’: // No dupes - ref script include only once if (HttpContext.Current.Items.Contains( STR_SCRIPTITEM_IDENTITIFIER + fileId ) ) return; HttpContext.Current.Items.Add(STR_SCRIPTITEM_IDENTITIFIER + fileId, string.Empty); where the fileId is the script name or unique identifier. The problem is on the Transferred page the item will already exist in Context and so fail to render because it thinks the script has already rendered based on the Context item. Bummer. The workaround for this is simple once you know what’s going on, but in this case it was a bitch to track down because the context items are used in many places throughout this class. The trick is to determine when a request is transferred and then removing the specific keys. The first issue is to determine if a script is in a Trransfer or Execute call: if (HttpContext.Current.CurrentHandler != HttpContext.Current.Handler) Context.Handler is the original handler and CurrentHandler is the actual currently executing handler that is running when a Transfer/Execute is active. You can also use Context.PreviousHandler to get the last handler and chain through the whole list of handlers applied if Transfer calls are nested (dog help us all for the person debugging that). For the ClientScriptProxy the full logic to check for a transfer and remove the code looks like this: /// <summary> /// Clears all the request specific context items which are script references /// and the script placement index. /// </summary> public void ClearContextItemsOnTransfer() { if (HttpContext.Current != null) { // Check for Server.Transfer/Execute calls - we need to clear out Context.Items if (HttpContext.Current.CurrentHandler != HttpContext.Current.Handler) { List<string> Keys = HttpContext.Current.Items.Keys.Cast<string>().Where(s => s.StartsWith(STR_SCRIPTITEM_IDENTITIFIER) || s == STR_ScriptResourceIndex).ToList(); foreach (string key in Keys) { HttpContext.Current.Items.Remove(key); } } } } along with a small update to the Current property getter that sets a global flag to indicate whether the request was transferred: if (!proxy.IsTransferred && HttpContext.Current.Handler != HttpContext.Current.CurrentHandler) { proxy.ClearContextItemsOnTransfer(); proxy.IsTransferred = true; } return proxy; I know this is pretty ugly, but it works and it’s actually minimal fuss without affecting the behavior of the rest of the class. Ben had a different solution that involved explicitly clearing out the Context items and replacing the collection with a manually maintained list of items which also works, but required changes through the code to make this work. In hindsight, it would have been better to use a single object that encapsulates all the ‘persisted’ values and store that object in Context instead of all these individual small morsels. Hindsight is always 20/20 though :-}. If possible use Page.Items ClientScriptProxy is a generic component that can be used from anywhere in ASP.NET, so there are various methods that are not Page specific on this component which is why I used Context.Items, rather than the Page.Items collection.Page.Items would be a better choice since it will sidestep the above Server.Transfer nightmares as the Page is reloaded completely and so any new Page gets a new Items collection. No fuss there. So for the ScriptContainer control, which has to live on the page the behavior is a little different. It is attached to Page.Items (since it’s a control): /// <summary> /// Returns a current instance of this control if an instance /// is already loaded on the page. Otherwise a new instance is /// created, added to the Form and returned. /// /// It's important this function is not called too early in the /// page cycle - it should not be called before Page.OnInit(). /// /// This property is the preferred way to get a reference to a /// ScriptContainer control that is either already on a page /// or needs to be created. Controls in particular should always /// use this property. /// </summary> public static ScriptContainer Current { get { // We need a context for this to work! if (HttpContext.Current == null) return null; Page page = HttpContext.Current.CurrentHandler as Page; if (page == null) throw new InvalidOperationException(Resources.ERROR_ScriptContainer_OnlyWorks_With_PageBasedHandlers); ScriptContainer ctl = null; // Retrieve the current instance ctl = page.Items[STR_CONTEXTID] as ScriptContainer; if (ctl != null) return ctl; ctl = new ScriptContainer(); page.Form.Controls.Add(ctl); return ctl; } } The biggest issue with this approach is that you have to explicitly retrieve the page in the static Current property. Notice again the use of CurrentHandler (rather than Handler which was my original implementation) to ensure you get the latest page including the one that Server.Transfer fired. Server.Transfer and Server.Execute are Evil All that said – this fix is probably for the 2 people who are crazy enough to rely on Server.Transfer/Execute. :-} There are so many weird behavior problems with these commands that I avoid them at all costs. I don’t think I have a single application that uses either of these commands… Related Resources Full source of ClientScriptProxy.cs (repository) Part of the West Wind Web Toolkit Static Singletons for ASP.NET Controls Post © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

Securing an ASP.NET MVC 2 Application

- by rajbk

This post attempts to look at some of the methods that can be used to secure an ASP.NET MVC 2 Application called Northwind Traders Human Resources. The sample code for the project is attached at the bottom of this post. We are going to use a slightly modified Northwind database. The screen capture from SQL server management studio shows the change. I added a new column called Salary, inserted some random salaries for the employees and then turned off AllowNulls. The reporting relationship for Northwind Employees is shown below. The requirements for our application are as follows: Employees can see their LastName, FirstName, Title, Address and Salary Employees are allowed to edit only their Address information Employees can see the LastName, FirstName, Title, Address and Salary of their immediate reports Employees cannot see records of non immediate reports. Employees are allowed to edit only the Salary and Title information of their immediate reports. Employees are not allowed to edit the Address of an immediate report Employees should be authenticated into the system. Employees by default get the “Employee” role. If a user has direct reports, they will also get assigned a “Manager” role. We use a very basic empId/pwd scheme of EmployeeID (1-9) and password test$1. You should never do this in an actual application. The application should protect from Cross Site Request Forgery (CSRF). For example, Michael could trick Steven, who is already logged on to the HR website, to load a page which contains a malicious request. where without Steven’s knowledge, a form on the site posts information back to the Northwind HR website using Steven’s credentials. Michael could use this technique to give himself a raise :-) UI Notes The layout of our app looks like so: When Nancy (EmpID 1) signs on, she sees the default page with her details and is allowed to edit her address. If Nancy attempts to view the record of employee Andrew who has an employeeID of 2 (Employees/Edit/2), she will get a “Not Authorized” error page. When Andrew (EmpID 2) signs on, he can edit the address field of his record and change the title and salary of employees that directly report to him. Implementation Notes All controllers inherit from a BaseController. The BaseController currently only has error handling code. When a user signs on, we check to see if they are in a Manager role. We then create a FormsAuthenticationTicket, encrypt it (including the roles that the employee belongs to) and add it to a cookie. private void SetAuthenticationCookie(int employeeID, List<string> roles) { HttpCookiesSection cookieSection = (HttpCookiesSection) ConfigurationManager.GetSection("system.web/httpCookies"); AuthenticationSection authenticationSection = (AuthenticationSection) ConfigurationManager.GetSection("system.web/authentication"); FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket( 1, employeeID.ToString(), DateTime.Now, DateTime.Now.AddMinutes(authenticationSection.Forms.Timeout.TotalMinutes), false, string.Join("|", roles.ToArray())); String encryptedTicket = FormsAuthentication.Encrypt(authTicket); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket); if (cookieSection.RequireSSL || authenticationSection.Forms.RequireSSL) { authCookie.Secure = true; } HttpContext.Current.Response.Cookies.Add(authCookie); } We read this cookie back in Global.asax and set the Context.User to be a new GenericPrincipal with the roles we assigned earlier. protected void Application_AuthenticateRequest(Object sender, EventArgs e){ if (Context.User != null) { string cookieName = FormsAuthentication.FormsCookieName; HttpCookie authCookie = Context.Request.Cookies[cookieName]; if (authCookie == null) return; FormsAuthenticationTicket authTicket = FormsAuthentication.Decrypt(authCookie.Value); string[] roles = authTicket.UserData.Split(new char[] { '|' }); FormsIdentity fi = (FormsIdentity)(Context.User.Identity); Context.User = new System.Security.Principal.GenericPrincipal(fi, roles); }} We ensure that a user has permissions to view a record by creating a custom attribute AuthorizeToViewID that inherits from ActionFilterAttribute. public class AuthorizeToViewIDAttribute : ActionFilterAttribute{ IEmployeeRepository employeeRepository = new EmployeeRepository(); public override void OnActionExecuting(ActionExecutingContext filterContext) { if (filterContext.ActionParameters.ContainsKey("id") && filterContext.ActionParameters["id"] != null) { if (employeeRepository.IsAuthorizedToView((int)filterContext.ActionParameters["id"])) { return; } } throw new UnauthorizedAccessException("The record does not exist or you do not have permission to access it"); }} We add the AuthorizeToView attribute to any Action method that requires authorization. [HttpPost][Authorize(Order = 1)]//To prevent CSRF[ValidateAntiForgeryToken(Salt = Globals.EditSalt, Order = 2)]//See AuthorizeToViewIDAttribute class[AuthorizeToViewID(Order = 3)] [ActionName("Edit")]public ActionResult Update(int id){ var employeeToEdit = employeeRepository.GetEmployee(id); if (employeeToEdit != null) { //Employees can edit only their address //A manager can edit the title and salary of their subordinate string[] whiteList = (employeeToEdit.IsSubordinate) ? new string[] { "Title", "Salary" } : new string[] { "Address" }; if (TryUpdateModel(employeeToEdit, whiteList)) { employeeRepository.Save(employeeToEdit); return RedirectToAction("Details", new { id = id }); } else { ModelState.AddModelError("", "Please correct the following errors."); } } return View(employeeToEdit);} The Authorize attribute is added to ensure that only authorized users can execute that Action. We use the TryUpdateModel with a white list to ensure that (a) an employee is able to edit only their Address and (b) that a manager is able to edit only the Title and Salary of a subordinate. This works in conjunction with the AuthorizeToViewIDAttribute. The ValidateAntiForgeryToken attribute is added (with a salt) to avoid CSRF. The Order on the attributes specify the order in which the attributes are executed. The Edit View uses the AntiForgeryToken helper to render the hidden token: ......<% using (Html.BeginForm()) {%><%=Html.AntiForgeryToken(NorthwindHR.Models.Globals.EditSalt)%><%= Html.ValidationSummary(true, "Please correct the errors and try again.") %><div class="editor-label"> <%= Html.LabelFor(model => model.LastName) %></div><div class="editor-field">...... The application uses View specific models for ease of model binding. public class EmployeeViewModel{ public int EmployeeID; [Required] [DisplayName("Last Name")] public string LastName { get; set; } [Required] [DisplayName("First Name")] public string FirstName { get; set; } [Required] [DisplayName("Title")] public string Title { get; set; } [Required] [DisplayName("Address")] public string Address { get; set; } [Required] [DisplayName("Salary")] [Range(500, double.MaxValue)] public decimal Salary { get; set; } public bool IsSubordinate { get; set; }} To help with displaying readonly/editable fields, we use a helper method. //Simple extension method to display a TextboxFor or DisplayFor based on the isEditable variablepublic static MvcHtmlString TextBoxOrLabelFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, bool isEditable){ if (isEditable) { return htmlHelper.TextBoxFor(expression); } else { return htmlHelper.DisplayFor(expression); }} The helper method is used in the view like so: <%=Html.TextBoxOrLabelFor(model => model.Title, Model.IsSubordinate)%> As mentioned in this post, there is a much easier way to update properties on an object. Download Demo Project VS 2008, ASP.NET MVC 2 RTM Remember to change the connectionString to point to your Northwind DB NorthwindHR.zip Feedback and bugs are always welcome :-)

Read the article

float right image pushes down text in table below in IE9 [migrated]

- by Cheers and hth. - Alf

I'm not a webmaster, not even a web developer, but I'm tasked with adding content to a Wordpress site developed by Someone Else(TM). Here's a page illustrating the problem: http://www.reginedagan.no/program/fiskekonkurranse-i-hovden/. It shows up nice in Firefox: But in IE9 the floated picture pushed down the text in the table below, so that it looks rather awful: I found some related questions on the web, e.g. "CSS: Float right in IE doesn't work!" and "why does a floating DIV mess up table positioning?", and the suggestions there led me to set clear: none on the div around the table, the table itself, and then each individual tr and finally even on each individual td. I also set width="99%" on the table, and tried (but I don't know how correctly) to apply the IE6 quirk fix margin-right: -3px. So here's the content as written in Wordpress, including the unsuccessful attempted fixes: <h1><div style="float: right"><a href="http://www.reginedagan.no/?attachment_id=671"><img src="http://www.reginedagan.no/wp-content/uploads/2012/06/fiskekonkurranse-2011-bilde-3-nedskalert.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" width="200" height="242" class="size-full wp-image-671"/></a></div>Fiskekonkurranse i Hovden!</h1> <div style="background-color: #FAF0F0; clear: none;"><table width="99%" style="clear: none; right-margin: -3px;"> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Dato:</td> <td style="text-align: left; clear: none;">Lørdag 21.juli</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; padding-left: 2em"; clear: none;>/ barn, Flytebrygga</td> <td style="text-align: left; clear: none;">15.00 – 16.00</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; padding-left: 2em; clear: none;">/ voksne (over 12 år), Moloen</td> <td style="text-align: left; clear: none;">15.00 – 17.00 </td> </tr> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Sted:</td> <td style="text-align: left; clear: none;">Hovden</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Pris:</td> <td style="text-align: left; clear: none;">voksen (over 12 år) kr. 50,-, barn kr. 30,-</td> </tr style=" clear: none;"> <tr> <td style="text-align: left; clear: none;">Arrangør:</td> <td style="text-align: left; clear: none;">Hovden Grendelag</td> </tr> </table></div> Velkommen til den årlige Fiskekonkurransen i Hovden lørdag 21. juli! <a href="http://www.reginedagan.no/program/fiskekonkurranse-i-hovden/fiskekonkurranse-2011-bilde-nedskalertjpg/" rel="attachment wp-att-672"><img src="http://www.reginedagan.no/wp-content/uploads/2012/03/fiskekonkurranse-2011-bilde-nedskalertjpg.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" width="400" height="267" class="alignleft size-full wp-image-672" /></a>Det blir stangfiske fra moloen og egen barnekonkurranse fra flytebrygga. Premiering for størst fisk, størst antall kg og flest antall stk. Premiering for barn kl. 16:30 på moloen. Alle premieres. Premiering for voksne på festen om kvelden. Salg av pølser og brus, vafler og kaffe, samt sluker. <div style="clear: left; border: 1px dashed gray; padding: 1em;"> Fest på Hovden samfunnshus kl. 21 – 02. Musikk: «Mister West», Steinar Aarsnes, Andøya. CC. Salg av øl/vin og snacks. </div> VEL MØTT — SKITT FISKE! And the resulting HTML served to a browser (only the relevant first part): <div style="float: right;"><a href="http://www.reginedagan.no/?attachment_id=671"><img src="http://www.reginedagan.no/wp-content/uploads/2012/06/fiskekonkurranse-2011-bilde-3-nedskalert.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" class="size-full wp-image-671" height="242" width="200"></a></div> <p>Fiskekonkurranse i Hovden!</p></h1> <div style="background-color: rgb(250, 240, 240); clear: none;"> <table style="clear: none;" width="99%"> <tbody><tr style="clear: none;"> <td style="text-align: left; clear: none;">Dato:</td> <td style="text-align: left; clear: none;">Lørdag 21.juli</td> </tr> The able to reproduce the effect with simpler code by setting clear: right on the table. However, I'm unable to reproduce the effect with default styling or with clear: none (as above). So it seems maybe it's something Wordpress does, or maybe it's something the theme thing or whatever it is does – but it's very similar to what others have observed, so there is strong indication that it's also a quirk in IE. Help?

Read the article

Find More Streaming TV Online with Clicker.tv

- by DigitalGeekery

Looking for a way to access more of your favorite TV Shows and other online entertainment? Today we’ll take a look at Clicker.tv which offers an awesome way to find tons of TV programs and movies. Clicker.tv Clicker.tv is an HTML5 web application that indexes both free and premium content from sources like Hulu, Netflix, Amazon, iTunes, and more. Some movies or episodes, such as those from Netflix and Amazon.com’s Video on Demand, will require viewers to have a membership, or pay a fee to access content. There is also a Clicker.tv app for Boxee. Navigation Navigating in Clicker.tv is rather easy with your keyboard. Directional Keys: navigate up, down, left, and right. Enter: make a selection Backspace: return to previous screen Escape: return to the Clicker.tv home screen. Note: You can also navigate through Clicker.tv with your PC remote. Recommended Browsers Firefox 3.6 + Safari 4.0 + Internet Explorer 8 + Google Chrome Note: You’ll need the latest version of Flash installed to play the majority of content. Earlier versions of the above browsers may work, but for full keyboard functionality, stick with the recommendations. Using Clicker.tv The first time you go to Clicker.tv, (link below) you’ll be met with a welcome screen and some helpful hints. Click Enter when finished. The Home screen feature Headliners, Trending Shows, and Trending Episodes. You can scroll through the different options and category links along the left side. The Search link pulls up an onscreen keyboard so you can enter search terms with a remote as well as a keyboard. Type in your search terms and matching items are displayed on the screen. You can also browse by a wide variety of categories. Select TV to browse only available TV programs. Or, browse only Movies in the movie category. There are also links for Web content and Music. Creating an Account You can access all Clicker.tv content without an account, but a Clicker account allows users to create playlists and subscribe to shows and have them automatically added to their playlist. You’ll need to go to Clicker.com and create an account. You’ll find the link at the upper right of the page. Enter a username, password and email address. There also an option to link with Facebook, or you can simply Skip this step. Go to Clicker.tv and sign in. You can manually type in your credentials or use the onscreen keyboard with your remote. Settings If you’d prefer not to display content from premium sites or Netflix, you can remove them through the Settings. Toggle Amazon, iTunes and Netflix on or off. Watching Episodes To watch an episode, select the image to begin playing from the default source, or select one of the other options. You can see in the example below that you can choose to watch the episode from Fox, Hulu, or Amazon Video on Demand. Your episode will then launch and begin playing from your chosen source. If you choose a premium content source such as iTunes or Amazon’s VOD, you’ll be taken to the Amazon’s website or iTunes and prompted to purchase the content. Playlists Once you’ve created an account and signed in, you can begin adding Shows to your playlist. Choose a series and select Add to Playlist. You’ll see in the example below that Family Guy has been Added and the number 142 is shown next to the playlist icon to indicate that 142 episodes has been added to your playlist. Underneath the listings for each episode in your playlist you can mark as Watched, or Remove individual episodes. You can also view the playlist or make any changes from the Clicker.com website. Click on “Playlist” on the top right of the Clicker.com site to access your playlists. You can select individual episodes from your playlists, remove them, or mark them as watched or unwatched. Clicker.TV and Boxee Boxee offers a Clicker.TV app that features a limited amount of the Clicker.TV content. You’ll find Clicker.TV located in the Boxee Apps Library. Select the Clicker App and then choose Start. From the Clicker App interface you can search or browse for available content. Select an episode you’d like to view… Then select play in the pop up window. You can also add it to your Boxee queue, share it, or add a shortcut, just as you can from other Boxee apps. When you click play your episode will launch and begin playing in Boxee. Conclusion Clicker.TV is currently still in Beta and has some limitations. Typical remotes won’t work completely in all external websites. So, you’ll still need a keyboard to be able to perform some operations such as switching to full screen mode. The Boxee app offers a more fully remote friendly environment, but unfortunately lacks a good portion of the Clicker.tv content. As with many content sites, availability of certain programming may be limited by your geographic location. Want to add Clicker.TV functionality to Windows Media Center? You can do so through the Boxee Integration for Windows 7 Media Center plug-in. Clicker.tv Clicker.com Similar Articles Productive Geek Tips Share Digital Media With Other Computers on a Home Network with Windows 7Stream Music and Video Over the Internet with Windows Media Player 12Listen to Online Radio with AntennaEnable Media Streaming in Windows Home Server to Windows Media PlayerNorton Internet Security 2010 [Review] TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

Read the article

Using Unity – Part 2

- by nmarun

In the first part of this series, we created a simple project and learned how to implement IoC pattern using Unity. In this one, I’ll show how you can instantiate other types that implement our IProduct interface. One place where this one would want to use this feature is to create mock types for testing purposes. Alright, let’s dig in. I added another class – Product2.cs to the ProductModel project. 1: public class Product2 : IProduct 2: { 3: public string Name { get; set;} 4: public Category Category { get; set; } 5: public DateTime MfgDate { get;set; } 6: 7: public Product2() 8: { 9: Name = "Canon Digital Rebel XTi"; 10: Category = new Category {Name = "Electronics", SubCategoryName = "Digital Cameras"}; 11: MfgDate = DateTime.Now; 12: } 13: 14: public string WriteProductDetails() 15: { 16: return string.Format("Name: {0}<br/>Category: {1}<br/>Mfg Date: {2}", 17: Name, Category, MfgDate.ToShortDateString()); 18: } 19: } Highlights of this class are that it implements IProduct interface and it has some different properties than the Product class. The Category class looks like below: 1: public class Category 2: { 3: public string Name { get; set; } 4: public string SubCategoryName { get; set; } 5: 6: public override string ToString() 7: { 8: return string.Format("{0} - {1}", Name, SubCategoryName); 9: } 10: } We’ll go to our web.config file to add the configuration information about this new class – Product2 that we created. Let’s first add a typeAlias element. 1: <typeAlias alias="Product2" type="ProductModel.Product2, ProductModel"/> That’s all that is needed for us to get an instance of Product2 in our application. I have a new button added to the .aspx page and the click event of this button is where all the magic happens: 1: private IUnityContainer unityContainer; 2: protected void Page_Load(object sender, EventArgs e) 3: { 4: unityContainer = Application["UnityContainer"] as IUnityContainer; 5: 6: if (unityContainer == null) 7: { 8: productDetailsLabel.Text = "ERROR: Unity Container not populated in Global.asax.<p />"; 9: } 10: else 11: { 12: if (!IsPostBack) 13: { 14: IProduct productInstance = unityContainer.Resolve<IProduct>(); 15: productDetailsLabel.Text = productInstance.WriteProductDetails(); 16: } 17: } 18: } 19: 20: protected void Product2Button_Click(object sender, EventArgs e) 21: { 22: unityContainer.RegisterType<IProduct, Product2>(); 23: IProduct product2Instance = unityContainer.Resolve<IProduct>(); 24: productDetailsLabel.Text = product2Instance.WriteProductDetails(); 25: } The unityContainer instance is set in the Page_Load event. Line 22 in the click event of the Product2Button registers a type mapping in the container. In English, this means that when unityContainer tries to resolve for IProduct, it gets an instance of Product2. Once this code runs, following output is rendered: There’s another way of doing this. You can resolve an instance of the requested type with a name from the container. We’ll have to update the container element of our web.config file to include the following: 1: <container name="unityContainer"> 2: <types> 3: <type type="IProduct" mapTo="Product"/> 4:  5: <type type="IProduct" mapTo="Product" name="LegacyProduct" /> 6:  7: <type type="IProduct" mapTo="Product2" name="NewProduct" /> 8: </types> 9: </container> I’ve added a Dropdownlist and a button to the design page: 1: <asp:DropDownList ID="ModelTypesList" runat="server"> 2: <asp:ListItem Text="Legacy Product" Value="LegacyProduct" /> 3: <asp:ListItem Text="New Product" Value="NewProduct" /> 4: </asp:DropDownList> 5: <br /> 6: <asp:Button ID="SelectedModelButton" Text="Get Selected Instance" runat="server" 7: onclick="SelectedModelButton_Click" /> 1: protected void SelectedModelButton_Click(object sender, EventArgs e) 2: { 3: // get the selected value: LegacyProduct or NewProduct 4: string modelType = ModelTypesList.SelectedValue; 5: // pass the modelType to the Resolve method 6: IProduct customModel = unityContainer.Resolve<IProduct>(modelType); 7: productDetailsLabel.Text = customModel.WriteProductDetails(); 8: } Pretty straight forward right? The only thing to note here is that the values in the dropdownlist item need to match the name attribute of the type. Depending on what you select, you’ll get an instance of either the Product class or the Product2 class and the corresponding WriteProductDetails() method is called. Now you see, how either of these methods can be used to create mock objects your the test project. See the code here. I’ll continue to share more of Unity in the next blog.

Read the article

So, how is the Oracle HCM Cloud User Experience? In a word, smokin’!

- by Edith Mireles-Oracle

By Misha Vaughan, Oracle Applications User Experience Oracle unveiled its game-changing cloud user experience strategy at Oracle OpenWorld 2013 (remember that?) with a new simplified user interface (UI) paradigm. The Oracle HCM cloud user experience is about light-weight interaction, tailored to the task you are trying to accomplish, on the device you are comfortable working with. A key theme for the Oracle user experience is being able to move from smartphone to tablet to desktop, with all of your data in the cloud. The Oracle HCM Cloud user experience provides designs for better productivity, no matter when and how your employees need to work. Release 8 Oracle recently demonstrated how fast it is moving development forward for our cloud applications, with the availability of release 8. In release 8, users will see expanded simplicity in the HCM cloud user experience, such as filling out a time card and succession planning. Oracle has also expanded its mobile capabilities with task flows for payslips, managing absences, and advanced analytics. In addition, users will see expanded extensibility with the new structures editor for simplified pages, and the with the user interface text editor, which allows you to update language throughout the UI from one place. If you don’t like calling people who work for you “employees,” you can use this tool to create a term that is suited to your business. Take a look yourself at what’s available now. What are people saying?Debra Lilley (@debralilley), an Oracle ACE Director who has a long history with Oracle Applications, recently gave her perspective on release 8: “Having had the privilege of seeing a preview of release 8, I am again impressed with the enhancements around simplified UI. Even more so, at a user group event in London this week, an existing Cloud HCM customer speaking publically about his implementation said he was very excited about release 8 as the absence functionality was so superior and simple to use.” In an interview with Lilley for a blog post by Dennis Howlett (@dahowlett), we probably couldn’t have asked for a more even-handed look at the Oracle Applications Cloud and the impact of user experience. Take the time to watch all three videos and get the full picture. In closing, Howlett’s said: “There is always the caveat that getting from the past to Fusion [from the editor: Fusion is now called the Oracle Applications Cloud] is not quite as simple as may be painted, but the outcomes are much better than anticipated in large measure because the user experience is so much better than what went before.” Herman Slange, Technical Manager with Oracle Applications partner Profource, agrees with that comment. “We use on-premise Financials & HCM for internal use. Having a simple user interface that works on a desktop as well as a tablet for (very) non-technical users is a big relief. Coming from E-Business Suite, there is less training (none) required to access HCM content. From a technical point of view, having the abilities to tailor the simplified UI very easy makes it very efficient for us to adjust to specific customer needs. When we have a conversation about simplified UI, we just hand over a tablet and ask the customer to just use it. No training and no explanation required.” Finally, in a story by Computer Weekly about Oracle customer BG Group, a natural gas exploration and production company based in the UK and with a presence in 20 countries, the author states: “The new HR platform has proved to be easier and more intuitive for HR staff to use than the previous SAP-based technology.” What’s Next for Oracle’s Applications Cloud User Experiences? This is the question that Steve Miranda, Oracle Executive Vice President, Applications Development, asks the Applications User Experience team, and we’ve been hard at work for some time now on “what’s next.” I can’t say too much about it, but I can tell you that we’ve started talking to customers and partners, under non-disclosure agreements, about user experience concepts that we are working on in order to get their feedback. We recently had a chance to talk about possibilities for the Oracle HCM Cloud user experience at an Oracle HCM Southern California Customer Success Summit. This was a fantastic event, hosted by Shane Bliss and Vance Morossi of the Oracle Client Success Team. We got to use the uber-slick facilities of Allergan, our hosts (of Botox fame), headquartered in Irvine, Calif., with a presence in more than 100 countries. Photo by Misha Vaughan, Oracle Applications User Experience Vance Morossi, left, and Shane Bliss, of the Oracle Client Success Team, at an Oracle HCM Southern California Customer Success Summit. We were treated to a few really excellent talks around human resources (HR). Alice White, VP Human Resources, discussed Allergan's process for global talent acquisition -- how Allergan has designed and deployed a global process, and global tools, along with Oracle and Cognizant, and are now at the end of a global implementation. She shared a couple of insights about the journey for Allergan: “One of the major areas for improvement was on role clarification within the company.” She said the company is “empowering managers and deputizing them as recruiters. Now it is a global process that is nimble and efficient." Deepak Rammohan, VP Product Management, HCM Cloud, Oracle, also took the stage to talk about pioneering modern HR. He reflected modern HR problems of getting the right data about the workforce, the importance of getting the right talent as a key strategic initiative, and other workforce insights. "How do we design systems to deal with all of this?” he asked. “Make sure the systems are talent-centric. The next piece is collaborative, engaging, and mobile. A lot of this is influenced by what users see today. The last thing is around insight; insight at the point of decision-making." Rammohan showed off some killer HCM Cloud talent demos focused on simplicity and mobility that his team has been cooking up, and closed with a great line about the nature of modern recruiting: "Recruiting is a team sport." Deepak Rammohan, left, and Jake Kuramoto, both of Oracle, debate the merits of a Google Glass concept demo for recruiters on-the-go. Later, in an expo-style format, the Apps UX team showed several concepts for next-generation HCM Cloud user experiences, including demos shown by Jake Kuramoto (@jkuramoto) of The AppsLab, and Aylin Uysal (@aylinuysal), Director, HCM Cloud user experience. We even hauled out our eye-tracker, a research tool used to show where the eye is looking at a particular screen, thanks to teammate Michael LaDuke. Dionne Healy, HCM Client Executive, and Aylin Uysal, Director, HCM Cloud user experiences, Oracle, take a look at new HCM Cloud UX concepts. We closed the day with Jeremy Ashley (@jrwashley), VP, Applications User Experience, who brought it all back together by talking about the big picture for applications cloud user experiences. He covered the trends we are paying attention to now, what users will be expecting of their modern enterprise apps, and what Oracle’s design strategy is around these ideas. We closed with an excellent reception hosted by ADP Payroll services at Bistango. Want to read more?Want to see where our cloud user experience is going next? Read more on the UsableApps web site about our latest design initiative: “Glance, Scan, Commit.” Or catch up on the back story by looking over our Applications Cloud user experience content on the UsableApps web site. You can also find out where we’ll be next at the Events page on UsableApps.

Read the article

Create PDF document using iTextSharp in ASP.Net 4.0 and MemoryMappedFile

- by sreejukg

In this article I am going to demonstrate how ASP.Net developers can programmatically create PDF documents using iTextSharp. iTextSharp is a software component, that allows developers to programmatically create or manipulate PDF documents. Also this article discusses the process of creating in-memory file, read/write data from/to the in-memory file utilizing the new feature MemoryMappedFile. I have a database of users, where I need to send a notice to all my users as a PDF document. The sending mail part of it is not covered in this article. The PDF document will contain the company letter head, to make it more official. I have a list of users stored in a database table named “tblusers”. For each user I need to send customized message addressed to them personally. The database structure for the users is give below. id Title Full Name 1 Mr. Sreeju Nair K. G. 2 Dr. Alberto Mathews 3 Prof. Venketachalam Now I am going to generate the pdf document that contains some message to the user, in the following format. Dear <Title> <FullName>, The message for the user. Regards, Administrator Also I have an image, bg.jpg that contains the background for the document generated. I have created .Net 4.0 empty web application project named “iTextSharpSample”. First thing I need to do is to download the iTextSharp dll from the source forge. You can find the url for the download here. http://sourceforge.net/projects/itextsharp/files/ I have extracted the Zip file and added the itextsharp.dll as a reference to my project. Also I have added a web form named default.aspx to my project. After doing all this, the solution explorer have the following view. In the default.aspx page, I inserted one grid view and associated it with a SQL Data source control that bind data from tblusers. I have added a button column in the grid view with text “generate pdf”. The output of the page in the browser is as follows. Now I am going to create a pdf document when the user clicking on the Generate PDF button. As I mentioned before, I am going to work with the file in memory, I am not going to create a file in the disk. I added an event handler for button by specifying onrowcommand event handler. My gridview source looks like <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" Width="481px" CellPadding="4" ForeColor="#333333" GridLines="None" onrowcommand="Generate_PDF" > ………………………………………………………………………….. ………………………………………………………………………….. </asp:GridView> In the code behind, I wrote the corresponding event handler. protected void Generate_PDF(object sender, GridViewCommandEventArgs e) { // The button click event handler code. // I am going to explain the code for this section in the remaining part of the article } The Generate_PDF method is straight forward, It get the title, fullname and message to some variables, then create the pdf using these variables. The code for getting data from the grid view is as follows // get the row index stored in the CommandArgument property int index = Convert.ToInt32(e.CommandArgument); // get the GridViewRow where the command is raised GridViewRow selectedRow = ((GridView)e.CommandSource).Rows[index]; string title = selectedRow.Cells[1].Text; string fullname = selectedRow.Cells[2].Text; string msg = @"There are some changes in the company policy, due to this matter you need to submit your latest address to us. Please update your contact details / personnal details by visiting the member area of the website. ................................... "; since I don’t want to save the file in the disk, I am going the new feature introduced in .Net framework 4, called Memory-Mapped Files. Using Memory-Mapped mapped file, you can created non-persisted memory mapped files, that are not associated with a file in a disk. So I am going to create a temporary file in memory, add the pdf content to it, then write it to the output stream. To read more about MemoryMappedFile, read this msdn article http://msdn.microsoft.com/en-us/library/dd997372.aspx The below portion of the code using MemoryMappedFile object to create a test pdf document in memory and perform read/write operation on file. The CreateViewStream() object will give you a stream that can be used to read or write data to/from file. The code is very straight forward and I included comment so that you can understand the code. using (MemoryMappedFile mmf = MemoryMappedFile.CreateNew("test1.pdf", 1000000)) { // Create a new pdf document object using the constructor. The parameters passed are document size, left margin, right margin, top margin and bottom margin. iTextSharp.text.Document d = new iTextSharp.text.Document(PageSize.A4, 72,72,172,72); //get an instance of the memory mapped file to stream object so that user can write to this using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { // associate the document to the stream. PdfWriter.GetInstance(d, stream); /* add an image as bg*/ iTextSharp.text.Image jpg = iTextSharp.text.Image.GetInstance(Server.MapPath("Image/bg.png")); jpg.Alignment = iTextSharp.text.Image.UNDERLYING; jpg.SetAbsolutePosition(0, 0); //this is the size of my background letter head image. the size is in points. this will fit to A4 size document. jpg.ScaleToFit(595, 842); d.Open(); d.Add(jpg); d.Add(new Paragraph(String.Format("Dear {0} {1},", title, fullname))); d.Add(new Paragraph("\n")); d.Add(new Paragraph(msg)); d.Add(new Paragraph("\n")); d.Add(new Paragraph(String.Format("Administrator"))); d.Close(); } //read the file data byte[] b; using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { BinaryReader rdr = new BinaryReader(stream); b = new byte[mmf.CreateViewStream().Length]; rdr.Read(b, 0, (int)mmf.CreateViewStream().Length); } Response.Clear(); Response.ContentType = "Application/pdf"; Response.BinaryWrite(b); Response.End(); } Press ctrl + f5 to run the application. First I got the user list. Click on the generate pdf icon. The created looks as follows. Summary: Creating pdf document using iTextSharp is easy. You will get lot of information while surfing the www. Some useful resources and references are mentioned below http://itextsharp.com/ http://www.mikesdotnetting.com/Article/82/iTextSharp-Adding-Text-with-Chunks-Phrases-and-Paragraphs http://somewebguy.wordpress.com/2009/05/08/itextsharp-simplify-your-html-to-pdf-creation/ Hope you enjoyed the article.

Read the article

SQL Server service accounts and SPNs

- by simonsabin

Service Principal Names (SPNs) are a must for kerberos authentication which is a must when using sharepoint, reporting services and sql server where you access one server that then needs to access another resource, this is called the double hop. The reason this is a complex problem is that the second hop has to be done with impersonation/delegation. For this to work there needs to be a way for the security system to make sure that the service in the middle is allowed to impersonate you, after all you are not giving the service your password. To do this you need to be using kerberos. The following is my simple interpretation of how kerberos works. I find the Kerberos documentation rediculously complex so the following might be sligthly wrong but I think its close enough. Keberos works on a ticketing system, the prinicipal is that you get a security token from AD and then you can pass that to the service in the middle which can then use that token to impersonate you. For that to work AD has to be able to identify who is allowed to use the token, in this case the service account.But how do you as a client know what service account the service in the middle is configured with. The answer is SPNs. The SPN is the mapping between your logical connection to the service account. One type of SPN is for the DNS name for the server and the port. i.e. MySQL.mydomain.com and 1433. You can see how this maps to SQL Server on that server, but how does it map to the account. Well it can be done in two ways, either you can have a mapping defined in AD or AD can use a default mapping (this is something I didn't know about). To map the SPN in AD then you have to add the SPN to the user account, this is documented in the first link below either directly or using a tool called SetSPN. You might say that is complex, well it is and thats why SQL Server tries to do it for you, at start up it tries to connect to AD and set the SPN on the account it is running as, clearly that can only happen IF SQL is running as a domain account AND importantly it has permission to do so. By default a normal domain user account doesn't have the correct permission, and is why so many people have this problem. If the account is a domain admin then it will have permission, but non of us run SQL using domain admin accounts do we. You might also note that the SPN contains the port number (this isn't a requirement now in sql 2008 but I won't go into that), so if you set it manually and you are using dynamic ports (the default for a named instance) what do you do, well every time the port changes you need to change the SPN allocated to the account. Thats why its advised to let SQL Server register the SPN itself. You may also have thought, well what happens if I change my service account, won't that lead to two accounts with the same SPN. Possibly. Having two accounts with the same SPN is definitely a problem. Why? Well because if there are two accounts Kerberos can't identify the exact account that the service is running as, it could be either account, and so your security falls back to NTLM. SETSPN is useful for finding duplicate SPNs Reading this you will probably be thinking Oh my goodness this is really difficult. It is however I've found today in investigating something else that there is an easy option. Use Network Service as your service account. Network Service is a special account and is tied to the computer. It appears that Network Service has the update rights to AD to set an SPN mapping for the computer account. This then allows the SPN mapping to work. I believe this also works for the local system account. To get all the SPNs in your AD run the following, it could be a large file, so you might want to restrict it to a specific OU, or CN ldifde -d "DC=<domain>" -l servicePrincipalName -F spn.txt You will read in the links below that you need SQL to register the SPN this is done how to use Kerberos authenticaiton in SQL Server - http://support.microsoft.com/kb/319723 Using Kerberos with SQL Server - http://blogs.msdn.com/sql_protocols/archive/2005/10/12/479871.aspx Understanding Kerberos and NTLM authentication in SQL Server Connections - http://blogs.msdn.com/sql_protocols/archive/2006/12/02/understanding-kerberos-and-ntlm-authentication-in-sql-server-connections.aspx Summary The only reason I personally know to use a domain account is when you can't get kerberos to work and you want to do BULK INSERT or other network service that requires access to a a remote server. In this case you have to resort to using SQL authentication and the SQL Server uses its service account to access the remote service, and thus you need a domain account. You migth need this if using some forms of replication. I've always found Kerberos awkward to setup and so fallen back to this domain account approach. So in summary to get Kerberos to work try using the network service or local system accounts. For a great post from the Adam Saxton of the SQL Server support team go to http://blogs.msdn.com/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx

Read the article

On Life and TechEd…

- by MOSSLover

I haven’t been writing here I know. I am very sorry, but I am just too busy trying to make my personal life just as good as my SharePoint life. So I was at TechEd again helping with the hands on labs, but I had a very long couple of weeks. I will have a long week again. I started out going to my friend, Randy Walker’s, wedding and I ended up at my grandmother’s condo in Fort Lauderdale. It was a very trying week. I had to drive 5 1/2 hours to the wedding from St. Louis and back. So Randy is an awesome person. He is a great guy and he was the first person ever to nominate me for MVP. I knew it probably wasn’t going anywhere, but it was the thought that count. I met Randy in 2008 at Tulsa Techfest. We had fun jamming out to Rockband. I knew he was good people back then. He has let me vent and I have let him vent over countless personal problems. He has always been a great friend. So it was a no brainer when I decided to go to his wedding no matter how much driving or stress or lack of sleep it was worth it. I am incredibly happy for him to finally find a diamond amongst a lot of coal. To take part in his celebration was so awesome. I thank him again for letting me participate in this ceremony. Now after Randy’s wedding I drove 5 1/2 hours landed in St. Louis, fed a cat an asthma pill hidden in wet cat food, and slept for 4 hours. I immediately saw my best friend who dropped me off at the airport and proceeded to TechEd. I slept 1 hour on each flight, then ended up working a 3 hour shift at TechEd. The rest of the week was a haze of connecting with people and sleeping very little. I got to see my friend Tasha and her husband Casey plus a billion other people. It was a great week and then I got a call from my grandmother. It turns out her husband was admitted to the hospital. My grandparents on my dad's side have been divorced since the 60s, which means I never got to see them together. I always felt like they never cliqued. When I was a kid we would always spend half our time in Chicago at grandma’s and half our time at grandpa’s houses. We would hang out with my grandpa’s wife Bobbi and my grandma’s husband Leo. My cousin’s always called Leo by Pappa and my brother and I would use Leo. My cousins lived in Chicago up until my cousin Gavi was born then they moved to Philadelphia. I remember complaining to my dad that we never visited anywhere cool just Chicago and Kansas City. I also remember Leo teaching me and my brother, Sam, how to climb a tree and play tennis on the back of the apartment wall. My grandfather’s was kind of stuffy and boring, but we always enjoyed my grandmother’s. She had games and Disney Movies and toys. Leo always made it a ton of fun to visit. I’m not sure a lot of people knew this fact, but when I was 16 years old I saw my grandfather on my mother’s side slowly die of congestive heart failure in a nursing home. When I was 18 I saw my grandmother on my mother’s side slowly die of an infection over a 30 day period. I hate hospitals and I hate nursing homes, but sometimes you have to suck in your gut and be strong. I tried to do that this weekend and I hope I did an ok job. I really hope things get better, but if they don’t I really appreciate everything he has given me in life. I am a terrible tennis player and I haven’t climbed a tree in ages, but they both encouraged me when encouragement from my parents was lacking. It was Father’s Day today and I have to at least pay tribute to Leo Morris, because he has been a good person to me all my life. Technorati Tags: TechEd,Grandparents,Father's Day

Read the article

Is Berkeley DB a NoSQL solution?

- by Gregory Burd

Berkeley DB is a library. To use it to store data you must link the library into your application. You can use most programming languages to access the API, the calls across these APIs generally mimic the Berkeley DB C-API which makes perfect sense because Berkeley DB is written in C. The inspiration for Berkeley DB was the DBM library, a part of the earliest versions of UNIX written by AT&T's Ken Thompson in 1979. DBM was a simple key/value hashtable-based storage library. In the early 1990s as BSD UNIX was transitioning from version 4.3 to 4.4 and retrofitting commercial code owned by AT&T with unencumbered code, it was the future founders of Sleepycat Software who wrote libdb (aka Berkeley DB) as the replacement for DBM. The problem it addressed was fast, reliable local key/value storage. At that time databases almost always lived on a single node, even the most sophisticated databases only had simple fail-over two node solutions. If you had a lot of data to store you would choose between the few commercial RDBMS solutions or to write your own custom solution. Berkeley DB took the headache out of the custom approach. These basic market forces inspired other DBM implementations. There was the "New DBM" (ndbm) and the "GNU DBM" (GDBM) and a few others, but the theme was the same. Even today TokyoCabinet calls itself "a modern implementation of DBM" mimicking, and improving on, something first created over thirty years ago. In the mid-1990s, DBM was the name for what you needed if you were looking for fast, reliable local storage. Fast forward to today. What's changed? Systems are connected over fast, very reliable networks. Disks are cheep, fast, and capable of storing huge amounts of data. CPUs continued to follow Moore's Law, processing power that filled a room in 1990 now fits in your pocket. PCs, servers, and other computers proliferated both in business and the personal markets. In addition to the new hardware entire markets, social systems, and new modes of interpersonal communication moved onto the web and started evolving rapidly. These changes cause a massive explosion of data and a need to analyze and understand that data. Taken together this resulted in an entirely different landscape for database storage, new solutions were needed. A number of novel solutions stepped up and eventually a category called NoSQL emerged. The new market forces inspired the CAP theorem and the heated debate of BASE vs. ACID. But in essence this was simply the market looking at what to trade off to meet these new demands. These new database systems shared many qualities in common. There were designed to address massive amounts of data, millions of requests per second, and scale out across multiple systems. The first large-scale and successful solution was Dynamo, Amazon's distributed key/value database. Dynamo essentially took the next logical step and added a twist. Dynamo was to be the database of record, it would be distributed, data would be partitioned across many nodes, and it would tolerate failure by avoiding single points of failure. Amazon did this because they recognized that the majority of the dynamic content they provided to customers visiting their web store front didn't require the services of an RDBMS. The queries were simple, key/value look-ups or simple range queries with only a few queries that required more complex joins. They set about to use relational technology only in places where it was the best solution for the task, places like accounting and order fulfillment, but not in the myriad of other situations. The success of Dynamo, and it's design, inspired the next generation of Non-SQL, distributed database solutions including Cassandra, Riak and Voldemort. The problem their designers set out to solve was, "reliability at massive scale" so the first focal point was distributed database algorithms. Underneath Dynamo there is a local transactional database; either Berkeley DB, Berkeley DB Java Edition, MySQL or an in-memory key/value data structure. Dynamo was an evolution of local key/value storage onto networks. Cassandra, Riak, and Voldemort all faced similar design decisions and one, Voldemort, choose Berkeley DB Java Edition for it's node-local storage. Riak at first was entirely in-memory, but has recently added write-once, append-only log-based on-disk storage similar type of storage as Berkeley DB except that it is based on a hash table which must reside entirely in-memory rather than a btree which can live in-memory or on disk. Berkeley DB evolved too, we added high availability (HA) and a replication manager that makes it easy to setup replica groups. Berkeley DB's replication doesn't partitioned the data, every node keeps an entire copy of the database. For consistency, there is a single node where writes are committed first - a master - then those changes are delivered to the replica nodes as log records. Applications can choose to wait until all nodes are consistent, or fire and forget allowing Berkeley DB to eventually become consistent. Berkeley DB's HA scales-out quite well for read-intensive applications and also effectively eliminates the central point of failure by allowing replica nodes to be elected (using a PAXOS algorithm) to mastership if the master should fail. This implementation covers a wide variety of use cases. MemcacheDB is a server that implements the Memcache network protocol but uses Berkeley DB for storage and HA to replicate the cache state across all the nodes in the cache group. Google Accounts, the user authentication layer for all Google properties, was until recently running Berkeley DB HA. That scaled to a globally distributed system. That said, most NoSQL solutions try to partition (shard) data across nodes in the replication group and some allow writes as well as reads at any node, Berkeley DB HA does not. So, is Berkeley DB a "NoSQL" solution? Not really, but it certainly is a component of many of the existing NoSQL solutions out there. Forgetting all the noise about how NoSQL solutions are complex distributed databases when you boil them down to a single node you still have to store the data to some form of stable local storage. DBMs solved that problem a long time ago. NoSQL has more to do with the layers on top of the DBM; the distributed, sometimes-consistent, partitioned, scale-out storage that manage key/value or document sets and generally have some form of simple HTTP/REST-style network API. Does Berkeley DB do that? Not really. Is Berkeley DB a "NoSQL" solution today? Nope, but it's the most robust solution on which to build such a system. Re-inventing the node-local data storage isn't easy. A lot of people are starting to come to appreciate the sophisticated features found in Berkeley DB, even mimic them in some cases. Could Berkeley DB grow into a NoSQL solution? Absolutely. Our key/value API could be extended over the net using any of a number of existing network protocols such as memcache or HTTP/REST. We could adapt our node-local data partitioning out over replicated nodes. We even have a nice query language and cost-based query optimizer in our BDB XML product that we could reuse were we to build out a document-based NoSQL-style product. XML and JSON are not so different that we couldn't adapt one to work with the other interchangeably. Without too much effort we could add what's missing, we could jump into this No SQL market withing a single product development cycle. Why isn't Berkeley DB already a NoSQL solution? Why aren't we working on it? Why indeed...

Read the article

ASP.NET MVC 3 Hosting :: ASP.NET MVC 3 First Look

- by mbridge

MVC 3 View Enhancements MVC 3 introduces two improvements to the MVC view engine: - Ability to select the view engine to use. MVC 3 allows you to select from any of your installed view engines from Visual Studio by selecting Add > View (including the newly introduced ASP.NET “Razor” engine”): - Support for the next ASP.NET “Razor” syntax. The newly previewed Razor syntax is a concise lightweight syntax. MVC 3 Control Enhancements - Global Filters: ASP.NET MVC 3 allows you to specify that a filter which applies globally to all Controllers within an app by adding it to the GlobalFilters collection. The RegisterGlobalFilters() method is now included in the default Global.asax class template and so provides a convenient place to do this since is will then be called by the Application_Start() method: void RegisterGlobalFilters(GlobalFilterCollection filters) { filters.Add(new HandleLoggingAttribute()); filters.Add(new HandleErrorAttribute()); } void Application_Start() { RegisterGlobalFilters (GlobalFilters.Filters); } - Dynamic ViewModel Property : MVC 3 augments the ViewData API with a new “ViewModel” property on Controller which is of type “dynamic” – and therefore enables you to use the new dynamic language support in C# and VB pass ViewData items using a cleaner syntax than the current dictionary API. Public ActionResult Index() { ViewModel.Message = "Hello World"; return View(); } - New ActionResult Types : MVC 3 includes three new ActionResult types and helper methods: 1. HttpNotFoundResult – indicates that a resource which was requested by the current URL was not found. HttpNotFoundResult will return a 404 HTTP status code to the calling client. 2. PermanentRedirects – The HttpRedirectResult class contains a new Boolean “Permanent” property which is used to indicate that a permanent redirect should be done. Permanent redirects use a HTTP 301 status code. The Controller class includes three new methods for performing these permanent redirects: RedirectPermanent(), RedirectToRoutePermanent(), andRedirectToActionPermanent(). All of these methods will return an instance of the HttpRedirectResult object with the Permanent property set to true. 3. HttpStatusCodeResult – used for setting an explicit response status code and its associated description. MVC 3 AJAX and JavaScript Enhancements MVC 3 ships with built-in JSON binding support which enables action methods to receive JSON-encoded data and then model-bind it to action method parameters. For example a jQuery client-side JavaScript could define a “save” event handler which will be invoked when the save button is clicked on the client. The code in the event handler then constructs a client-side JavaScript “product” object with 3 fields with their values retrieved from HTML input elements. Finally, it uses jQuery’s .ajax() method to POST a JSON based request which contains the product to a /theStore/UpdateProduct URL on the server: $('#save').click(function () { var product = { ProdName: $('#Name').val() Price: $('#Price').val(), } $.ajax({ url: '/theStore/UpdateProduct', type: "POST"; data: JSON.stringify(widget), datatype: "json", contentType: "application/json; charset=utf-8", success: function () { $('#message').html('Saved').fadeIn(), }, error: function () { $('#message').html('Error').fadeIn(), } }); return false; }); MVC will allow you to implement the /theStore/UpdateProduct URL on the server by using an action method as below. The UpdateProduct() action method will accept a strongly-typed Product object for a parameter. MVC 3 can now automatically bind an incoming JSON post value to the .NET Product type on the server without having to write any custom binding. [HttpPost] public ActionResult UpdateProduct(Product product) { // save logic here return null } MVC 3 Model Validation Enhancements MVC 3 builds on the MVC 2 model validation improvements by adding support for several of the new validation features within the System.ComponentModel.DataAnnotations namespace in .NET 4.0: - Support for the new DataAnnotations metadata attributes like DisplayAttribute. - Support for the improvements made to the ValidationAttribute class which now supports a new IsValid overload that provides more info on the current validation context, like what object is being validated. - Support for the new IValidatableObject interface which enables you to perform model-level validation and also provide validation error messages which are specific to the state of the overall model. MVC 3 Dependency Injection Enhancements MVC 3 includes better support for applying Dependency Injection (DI) and also integrating with Dependency Injection/IOC containers. Currently MVC 3 Preview 1 has support for DI in the below places: - Controllers (registering & injecting controller factories and injecting controllers) - Views (registering & injecting view engines, also for injecting dependencies into view pages) - Action Filters (locating and injecting filters) And this is another important blog about Microsoft .NET and technology: - Windows 2008 Blog - SharePoint 2010 Blog - .NET 4 Blog And you can visit here if you're looking for ASP.NET MVC 3 hosting

Read the article

Creating and maintaining Orchard translations

- by Bertrand Le Roy

Many volunteers have already stepped up to provide translations for Orchard. There are many challenges to overcome with translating such a project. Orchard is a very modular CMS, so the translation mechanism needs to account for the core as well as first and third party modules and themes. Another issue is that every new version of Orchard or of a module changes some localizable strings and adds new ones as others enter obsolescence. In order to address those problems, I've built a small Orchard module that automates some of the most complex tasks that maintaining a translation implies. In this post, I'll walk you through the operations I had to do to update the French translation for Orchard 1.0. In order to make sure you translate all the first party modules, I would recommend that you start from a full source code enlistment. The reason is that I'll show how you can extract the default en-US translation from any source code enlistment. That enables you to create a translation that is even more up-to-date than what is currently on the site. Alternatively, you could start by downloading the current en-US translation. If you decide to do so, just skip the relevant paragraphs. First, let's install the Orchard Translation Manager. I'm starting from a vanilla clone of the latest in the code repository. After you've setup the site, go into the dashboard and click on Gallery. Locate the Orchard Translation Manager in the list of modules and click "Install". Once the module is installed, you need to enable its one feature by going into Configuration/Features and clicking "Enable" next to Vandelay.TranslationManager. We're done with the setup that we need in order to start our translation work. We'll now switch to the command-line and to our favorite text editor. Open a command-line on the Orchard web site folder. I found the easiest way to do this is to do a SHIFT+right-click on the Orchard.Web folder in Windows Explorer and to click "Open command window here". Type bin\orchard to enter the Orchard command-line environment. If you do a "help commands" you should see four commands in the list that came from the module we just installed: extract default translation, install translation, package translation and sync translation. First, we're going to generate the default translation. Note that it is possible to generate that default translation for a specific list of modules and themes by using the /Extensions: switch, which should facilitate the translation of third party extensions, but in this tutorial we're going to generate it for the whole of the Orchard source code. extract default translation /Output:\temp .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This should have created an Orchard.en-us.po.zip file in the temp directory. Extract that archive into an orchard.po folder under \temp. The next step depends on whether you have an existing translation that you want to update or not. If you do have an existing translation, just extract it into the same \temp\orchard.po directory. That should result in a file structure where you have the default en-US translation alongside your own. If you don't have an existing translation, just continue, the commands will be the same. We are now going to synchronize those translations (or generate the stub for a new one if you didn't start from an existing translation). sync translation /Input:\temp\orchard.po /Culture:fr-FR After this command (where you should of course substitute fr-FR with the culture you're working on), we now have updated files that contain a few useful flags. Open each of the .po files under the culture you are working on (there should be around 36) with your favorite text editor. For all the strings that are still valid in the latest version, nothing changes and you don't need to do anything. For all the strings that disappeared from the default culture, the old translation will still be there but they will be prefixed with the following comment: # Obsolete translation Conveniently, all the obsolete strings will be grouped at the end of the file. You can select all those and delete them. For all the new strings, you will see the following comment: # Untranslated string This is where the hard work begins. You'll need to translate each of those new strings by entering the translation between the quotes in: msgstr "" Don't introduce hard carriage returns in the strings, just stay on one line (your text editor should do some reasonable wrapping so this shouldn't be a big deal). Once you're done with a file, save it. Make sure, and this is very important, that your text editor is saving using the UTF-8 encoding. In Notepad, that setting can be found in the file saving dialog by doing a "Save As" rather than a plain "Save": When all the po files have been edited, you are ready to package the translation for submission (a.k.a. sending e-mail to the localization mailing list). package translation /Culture:fr-FR /Input:\temp\orchard.po /Output:\temp You should now see a Orchard.fr-FR.po.zip file in temp that is ready to be submitted. That is, once you've tested it, which can be done by deploying it into the site: install translation \temp\orchard.fr-fr.po.zip Once this is done you can go into the dashboard under Configuration/Settings and click on "Add or remove supported cultures for the site". Choose your culture and click "Add". You can go back to settings and set the default culture. Save. You may now take a tour of the application and verify that everything works as expected: And that's it really. Creating a translation for Orchard is a matter of a few hours. If you don't see a translation for your culture, please consider creating it.

Read the article

Some New .NET Toys (Repost)

- by Kevin Grossnicklaus

Last week I was fortunate enough to spend time in Redmond on Microsoft’s campus for the 2011 Microsoft MVP Summit. It was great to hang out with a number of old friends and get the opportunity to talk tech with the various product teams up at Microsoft. The weather wasn’t exactly sunny but Microsoft always does a great job with the Summit and everyone had a blast (heck, I even got to run the bases at SafeCo field) While much of what we saw is covered under NDA, there a ton of great things in the pipeline from Microsoft and many things that are already available (or just became so) that I wasn’t necessarily aware of. The purpose of this post is to share some of the info I learned on resources and tools available to .NET developers today. Please let me know if you have any questions (or if you know of something else cool which might benefit others). Enjoy! Visual Studio 2010 SP1 Microsoft has issued the RTM release of Visual Studio 2010 SP1. You can download the full SP1 on MSDN as of today (March 10th to the general public) and take advantage of such things as: Silverlight 4 is included in the box (as opposed to a separate install) Silverlight 4 Profiling WCF RIA Services SP1 Intellitrace for 64-bit and SharePoint ASP.NET now easily supports IIS Express and SQL CE Want a description of all that’s new beyond the above biased list (which arguably only contains items I think are important)? Check out this KB article. Portable Library Tools CTP Without much fanfare Microsoft has released a CTP of a new add-in to Visual Studio 2010 which simplifies code sharing between projects targeting different runtimes (i.e. Silverlight, WPF, Win7 Phone, XBox). With this Add-In installed you can add a new project of type “Portable Library” and specify which platforms you wish to target. Once that is done, any code added to this library will be limited to use only features which are common to all selected frameworks. Other projects can now reference this portable library and be provided assemblies custom built to their environment. This greatly simplifies the current process of sharing linked files between platforms like WPF and Silverlight. You can find out more about this CTP and how it works on this great blog post. Visual Studio Async CTP Microsoft has also released a CTP of a set of language and framework enhancements to provide a much more powerful asynchronous programming model. Due to the focus on async programming in all types of platforms (and it being the ONLY option in Silverlight and Win7 phone) a move towards a simpler and more understandable model is always a good thing. This CTP (called Visual Studio Async CTP) can be downloaded here. You can read more about this CTP on this blog post. MSDN Code Samples Gallery Microsoft has also launched new code samples gallery on their MSDN site: http://code.msdn.microsoft.com/. This site allows you to easily search for small samples of code related to a particular technology or platform. If a sample of code you are looking for is not found, you can request one via the site and other developers can see your request and provide a sample to the site to suit your needs. You can also peruse requested samples and, if you find a scenario where you can provide value, upload your own sample for the benefit of others. Samples are packaged into the VS .vsix format and include any necessary references/dependencies. By using .vsix as the deployment mechanism, as samples are installed from the site they are kept in your Visual Studio 2010 Samples Gallery and kept for your future reference. If you get a chance, check out the site and see how it is done. Although a somewhat simple concept, I was very impressed with their implementation and the way they went about trying to suit a need. I’ll definitely be looking there in the future as need something or want to share something. MSDN Search Capabilities Another item I learned recently and was not aware of (that might seem trivial to some) is the power of the MSDN site’s search capabilities. Between the Code Samples Gallery described above and the search enhancements on MSDN, Microsoft is definitely investing in their platform to help provide developers of all skill levels the tools and resources they need to be successful. What do I mean by the MSDN search capability and why should you care? If you go to the MSDN home page (http://msdn.microsoft.com) and use the “Search MSDN with Big” box at the very top of the page you will see some very interesting results. First, the search actually doesn’t just search the MSDN library it searches: MSDN Library All Microsoft Blogs CodePlex StackOverflow Downloads MSDN Magazine Support Knowledgebase (I’m not sure it even ends there but the above are all I know of) Beyond just searching all the above locations, the results are formatted very nicely to give some contextual information based on where the result came from. For example, if a keyword search returned results from CodePlex, each row in the search results screen would include a large amount of information specific to CodePlex such as: Looking at the above results immediately tells you everything from the page views to the CodePlex ratings. All in all, knowing that this much information is indexed and available from a single search location will lead me to utilize this as one of my initial searches for development information.

Read the article

A Rose by Any Other Name..

- by Geoff N. Hiten

It is always a good start when you can steal a title line from one of the best writers in the English language. Let’s hope I can make the rest of this post live up to the opening. One recurring problem with SQL server is moving databases to new servers. Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>. If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple. You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address. The other creates a new alias for the old server, since the original system name is now redirected. Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts. Figure 1 – Microsoft DNS MMC Snap-In Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand. That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated. The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection. This can be a pain installing and configuring the app on multiple client servers. The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys. Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key. If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key. If you do this repeatedly, you can simply edit an existing registry file. Create the entry using the SQL Configuration Manager. You must use a 64-bit system to create the WoW key. The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”. Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again. SQL Server Management Server is a 32-bit app, as are most SQL test utilities. Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location: HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo. You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”. Save with an appropriate name and location. The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported. In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file. Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy. To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server. The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

Read the article

Video on Architecture and Code Quality using Visual Studio 2012–interview with Marcel de Vries and Terje Sandstrom by Adam Cogan

- by terje

Find the video HERE. Adam Cogan did a great Web TV interview with Marcel de Vries and myself on the topics of architecture and code quality. It was real fun participating in this session. Although we know each other from the MVP ALM community, Marcel, Adam and I haven’t worked together before. It was very interesting to see how we agreed on so many terms, and how alike we where thinking. The basics of ensuring you have a good architecture and how you could document it is one thing. Also, the same agreement on the importance of having a high quality code base, and how we used the Visual Studio 2012 tools, and some others (NDepend for example) to measure and ensure that the code quality was where it should be. As the tools, methods and thinking popped up during the interview it was a lot of “Hey ! I do that too!”. The tools are not only for “after the fact” work, but we use them during the coding. That way the tools becomes an integrated part of our coding work, and helps us to find issues we may have overlooked. The video has a bunch of call outs, pinpointing important things to remember. These are also listed on the corresponding web page. I haven’t seen that touch before, but really liked this way of doing it – it makes it much easier to spot the highlights. Titus Maclaren and Raj Dhatt from SSW have done a terrific job producing this video. And thanks to Lei Xu for doing the camera and recording job. Thanks guys ! Also, if you are at TechEd Amsterdam 2012, go and listen to Adam Cogan in his session on “A modern architecture review: Using the new code review tools” Friday 29th, 10.15-11.30 and Marcel de Vries session on “Intellitrace, what is it and how can I use it to my benefit” Wednesday 27th, 5-6.15 The highlights points out some important practices. I’ll elaborate on a few of them here: Add instructions on how to compile the solution. You do this by adding a text file with instructions to the solution, and keep it under source control. These instructions should contain what is needed on top of a standard install of Visual Studio. I do a lot of code reviews, and more often that not, I am not even able to compile the program, because they have used some tool or library that needs to be installed. The same applies to any new developer who enters into the team, so do this to increase your productivity when the team changes, or a team member switches computer. Don’t forget to document what you have to configure on the computer, the IIS being a common one. The more automatic you can do this, the better. Use NuGet to get down libraries. When the text document gets more than say, half a page, with a bunch of different things to do, convert it into a powershell script instead. The metrics warning levels. These are very conservatively set by Microsoft. You rarely see anything but green, and besides, you should have color scales for each of the metrics. I have a blog post describing a more appropriate set of levels, based on both research work and industry “best practices”. The essential limits are: Cyclomatic complexity and coupling: Higher numbers are worse On method levels: Green : From 0 to 10 Yellow: From 10 to 20 (some say 15). Acceptable, but have a look to see if there is something unneeded here. Red: From 20 to 40: Action required, get these down. Bleeding Red: Above 40 This is the real red alert. Immediate action! (My invention, as people have asked what do I do when I have cyclomatic complexity of 150. The only answer I could think of was: RUN! ) Maintainability index: Lower numbers are worse, scale from 0 to 100. On method levels: Green: 60 to 100 Yellow: 40 – 60. You will always have methods here too, accept the higher ones, take a look at those who are down to the lower limit. Check up against the other metrics.) Red: 20 – 40: Action required, fix these. Bleeding red: Below 20. Immediate action required. When doing metrics analysis, you should leave the generated code out. You do this by adding attributes, unfortunately Microsoft has “forgotten” to add these to all their stuff, so you might have to add them to some of the code. It most cases it can be done so that it is not overwritten by a new round of code generation. Take a look a my blog post here for details on how to do that. Class level metrics might also be useful, at least for coupling and maintenance. But it is much more difficult to set any fixed limits on those. Any metric aggregations on higher level tend to be pretty useless, as the number of methods vary pretty much, and there are little science on what number of methods can be regarded as good or bad. NDepend have a recommendation, but they say it may vary too. And in these days of data binding, the number might be pretty high, as properties counts as methods. However, if you take the worst case situations, classes with more than 20 methods are suspicious, and coupling and cyclomatic complexity go red above 20, so any classes with more than 20x20 = 400 for these measures should be checked over. In the video we mention the SOLID principles, coined by “Uncle Bob” (Richard Martin). One of them, the Dependency Inversion principle we discuss in the video. It is important to note that this principle is NOT on whether you should use a Dependency Inversion Container or not, it is about how you design the interfaces and interactions between your classes. The Dependency Inversion Container is just one technique which is based on this principle, but which main purpose is to isolate things you would like to change at runtime, for example if you implement a plug in architecture. Overuse of a Dependency Inversion Container is however, NOT a good thing. It should be used for a purpose and not as a general DI solution. The general DI solution and thinking however is useful far beyond the DIC. You should always “program to an abstraction”, and not to the concreteness. We also talk a bit about the GRASP patterns, a term coined by Craig Larman in his book Applying UML and design patterns. GRASP patterns stand for General Responsibility Assignment Software Patterns and describe fundamental principles of object design and responsibility assignment. What I find great with these patterns is that they is another way to focus on the responsibility of a class. One of the things I most often found that is broken in software designs, is that the class lack responsibility, and as a result there are a lot of classes mucking around in the internals of the other classes. We also discuss the term “Code Smells”. This term was invented by Kent Beck and Martin Fowler when they worked with Fowler’s “Refactoring” book. A code smell is a set of “bad” coding practices, which are the drivers behind a corresponding set of refactorings. Here is a good list of the smells, and their corresponding refactor patterns. See also this.

Read the article

SQL Saturday #44 Huntington Beach Recap

What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach. It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location. I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis). It made me think about this: Price of all those cars: $ 150,000+. Impacting the ability of people to learn: Priceless. We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well. That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Blogging tips for SQL Server professionals

- by jamiet

For some time now I have been intending to put some material together relating my blogging experiences since I began blogging in 2004 and that led to me submitting a session for SQLBits recently where I intended to do just that. That didn’t get enough votes to allow me to present however so instead I resolved to write a blog post about it and Simon Sabin’s recent post Blogging – how do you do it? has prompted me to get around to completing it. So, here I present a compendium of tips that I’ve picked up from authoring a fair few blog posts over the past 6 years. Feedburner Feedburner.com is a service that can consume your blog’s default RSS feed and provide another, replacement, feed that has exactly the same content. You can then supply that replacement feed on your blog site for other people to consume in their RSS readers. Why would you want to do this? Well, two reasons actually: It makes your blog portable. If you ever want to move your blog to a different URL you don’t have to tell your subscribers to move to a different feed. The feedburner feed is a pointer to your blog content rather than being a copy of it. Feedburner will collect stats telling you how many people are subscribed to your feed, which RSS readers they use, stuff like that. Here’s a sample screenshot for http://sqlblog.com/blogs/jamie_thomson/: It also tells you what your most viewed posts are: Web stats like these are notoriously inaccurate but then again the method of measurement here is not important, what IS important is that it gives you a trustworthy ranking of your blog posts and (in my opinion) knowing which are your most popular posts is more important than knowing exactly how many views each post has had. This is just the tip of the iceberg of what Feedburner provides and I recommend every new blogger to try it! Monitor subscribers using Google Reader If for some reason Feedburner is not to your taste or (more likely) you already have an established RSS feed that you do not want to change then Google provide another way in which you can monitor your readership in the shape of their online RSS reader, Google Reader. It provides, for every RSS feed, a collection of stats including the number of Google Reader users that have subscribed to that RSS feed. This is really valuable information and in fact I have been recording this statistic for mine and a number of other blogs for a few years now and as such I can produce the following chart that indicates how readership is trending for those blogs over time: [Good news for my fellow SQLBlog bloggers.] As Stephen Few readily points out, its not the numbers that are important but the trend. Search Engine Optimisation (SEO) SEO (or “How do I get my blog to show up in Google”) is a massive area of expertise which I don’t want (and am unable) to cover in much detail here but there are some simple rules of thumb that will help: Tags – If your blog engine offers the ability to add tags to your blog post, use them. Invariably those tags go into the meta section of the page HTML and search engines lap that stuff up. For example, from my recent post Microsoft publish Visual Studio 2010 Database Project Guidance: Title – Search engines take notice of web page titles as well so make them specific and descriptive (e.g. “Configuring dtsConfig connection strings”) rather than esoteric and meaningless in a vain attempt to be humorous (e.g. “Last night a DJ saved my ETL batch”)! Title(2) – Make your title even more search engine friendly by mentioning high level subject areas, not dissimilar to Twitter hashtags. For example, if you look at all of my posts related to SSIS you will notice that nearly all contain the word “SSIS” in the title even if I had to shoehorn it in there by putting it in square brackets or similar. Another tip, if you ARE putting words into your titles in this artificial manner then put them at the end so that they’re not that prominent in search engine results; they’re there for the search engines to consume, not for human beings. Images – Always add titles and alternate text (ALT attribute) to images in your blog post. If you use Windows 7 or Windows Vista then you can use Live Writer (which Simon recommended) makes this easy for you. Headings – If you want to highlight section headings use heading tags (e.g. <H1>, <H2>, <H3> etc…) rather than just formatting the text appropriately – again, Live makes this easy. These tags give your blog posts structure that is understood by search engines and RSS readers alike. (I believe it makes them more amenable to CSS as well – though that’s not something I know too much about). If you check the HTML source for the blog post you’re reading right now you’ll be able to scan through and see where I have used heading tags. Microsoft provide a free tool called the SEO Toolkit that will analyse your blog site (for free) and tell you what things you should change to improve SEO. Go read more and download for free at Search Engine Optimization Toolkit. Did I mention that it was free? Miscellaneous Tips If you are including code in your blog post then ensure it is formatted correctly. Use SQL Server Central’s T-SQL prettifier for formatting T-SQL code. Use images and videos. Personally speaking there’s nothing I like less when reading a blog than paragraph after paragraph of text. Images make your blog more appealing which means people are more likely to read what you have written. Be original. Don’t plagiarise other people’s content and don’t simply rewrite the contents of Books Online. Every time you publish a blog post tweet a link to it. Include hashtags in your tweet that are more likely to grab people’s attention. That’s probably enough for now - I hope this blog post proves useful to someone out there. If you would appreciate a related session at a forthcoming SQLBits conference then please let me know. This will likely be my last blog post for 2010 so I would like to take this opportunity to thank everyone that has commented on, linked to or read any of my blog posts in that time. 2011 is shaping up to be a very interesting for SQL Server observers with the impending release of SQL Server code-named Denali and I promise I’ll have lots more content on that as the year progresses. Happy New Year. @Jamiet

Read the article

SQLAuthority News – Technical Review of Learning at Koenig Solutions

- by pinaldave

Yesterday I finished my 3 days fast track in person learning of course End to End SQL Server Business Intelligence at Koenig Solutions. You can read my previous article over here regarding why am I learning SQL Server. Yesterday I blogged about my experience of arriving to Training Center and my induction with the center. The Training Days I had enrolled for three days training so my routine each of the three days was very much same. However, the content every day was different as I was learning something new every day. Let me describe a few of the interesting details of my daily routine. A Single Student Batch The best part of my training was that in my training batch, I am single student. Koenig is known to smaller batches and often they have single student batches as well. I was very much delighted to know that I will have dedicated access and attention from my trainer in my batch as I will be single student in my batch. In most of the labs I have observed there are no more than 4 students at any time. Prakash and Pinal 7:30 AM Breakfast Talk We all students gather at 7:30 in breakfast area. The best time of the day. I was the only Indian student in the group. The other students were from USA, Canada, Nigeria, Bhutan, Tanzania, and a few others from other countries. I immediately become the source of information and reference manual. Though the distance between Delhi and Bangalore is 2000+ KM I was considered as a local guy. 8:30 AMHeading to Training Center Every day without fail at 8:30 the van started from our accommodation to the training center. As mentioned in an earlier blog post the distance is about 5 minutes and we were able to reach at the location before 8:45. This gave us some time settle in before our class starts at 9:00 AM. 9:00 AM Order Lunch Food Well it may sound funny that we just had breakfast 30 minutes but the first thing everybody has to do is to order lunch as soon as the class starts. There is an online training portal to order food for the day. Everybody has to place their order early during the day so the food arrives on time during lunch time. Everybody can order whatever they want to order using an online ordering system. The options are plenty and everybody can order what they like. 9:05 AM Learning Starts After deciding the lunch we started the learning. I was very fortunate to have a very experienced trainer - Prakash Chheatry. Though I have never met him before I have heard a lot about Prakash. He is known as the top most SQL Server Trainer in India. His student list contains some of the very well known SQL Server Experts of the world and few of SQL Server “best seller” book authors. Learning continues till 1:00 PM with one tea-coffee break in between. 1:00 PM Lunch The lunch time is again the fun time. We all students get together in the afternoon and tell the stories of the world. Indeed the best part of the day beside learning new stuff. 4:55 PM Ready to Return We stop at 4:55 as at precisely 5:00 PM the van stops by the institute which takes us back to our accommodation. Trust me seriously long long day always but the amount of the learning is the win of the day. 7:30 PM Dinner Time After coming back to the accommodation I study till 7:30 and then rush for dinner. Dinner is world cuisine and deserts are really delicious. After dinner every day I have written a blog and retired early as the next day is always going to be busier than the present day. What did I learn As I mentioned earlier I know SQL Server fairly well. I had expressed the same in my conversation as well. This is the reason I was assigned a fairly senior trainer and we learned everything quite quickly. As I know quite a few things we went pretty fast in many topics. There were a few things, I wanted to learn in detail as well practice on the labs. We slowed down where we wanted and rush through the concepts where I was very comfortable. Here is the list of the things which we covered in action pack three days. Introduction to Business Intelligence (Intro) SQL Server Analysis Service (Theory and Lab) SQL Server Integration Service (Theory and Lab) SQL Server Reporting Service (Theory and Lab) SQL Server PowerPivot (Lab) UDM (Theory) SharePoint Concepts (Theory) Power View (Demo) Business Intelligence and Security (Discussion) Well, I was delighted that I was able to refresh lots of concepts during these three days. Thanks to my trainer and my friend who helped me to have a good learning experience. I believe all the learning will help me in my growth and future career. With this I end my this experience. I am planning to have another online learning experience later this month. I will blog about my experience as I begin it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

Read the article

API Message Localization

- by Jesse Taber

In my post, “Keep Localizable Strings Close To Your Users” I talked about the internationalization and localization difficulties that can arise when you sprinkle static localizable strings throughout the different logical layers of an application. The main point of that post is that you should have your localizable strings reside as close to the user-facing modules of your application as possible. For example, if you’re developing an ASP .NET web forms application all of the localizable strings should be kept in .resx files that are associated with the .aspx views of the application. In this post I want to talk about how this same concept can be applied when designing and developing APIs. An API Facilitates Machine-to-Machine Interaction You can typically think about a web, desktop, or mobile application as a collection “views” or “screens” through which users interact with the underlying logic and data. The application can be designed based on the assumption that there will be a human being on the other end of the screen working the controls. You are designing a machine-to-person interaction and the application should be built in a way that facilitates the user’s clear understanding of what is going on. Dates should be be formatted in a way that the user will be familiar with, messages should be presented in the user’s preferred language, etc. When building an API, however, there are no screens and you can’t make assumptions about who or what is on the other end of each call. An API is, by definition, a machine-to-machine interaction. A machine-to-machine interaction should be built in a way that facilitates a clear and unambiguous understanding of what is going on. Dates and numbers should be formatted in predictable and standard ways (e.g. ISO 8601 dates) and messages should be presented in machine-parseable formats. For example, consider an API for a time tracking system that exposes a resource for creating a new time entry. The JSON for creating a new time entry for a user might look like: 1: { 2: "userId": 4532, 3: "startDateUtc": "2012-10-22T14:01:54.98432Z", 4: "endDateUtc": "2012-10-22T11:34:45.29321Z" 5: } Note how the parameters for start and end date are both expressed as ISO 8601 compliant dates in UTC. Using a date format like this in our API leaves little room for ambiguity. It’s also important to note that using ISO 8601 dates is a much, much saner thing than the \/Date(<milliseconds since epoch>)\/ nonsense that is sometimes used in JSON serialization. Probably the most important thing to note about the JSON snippet above is the fact that the end date comes before the start date! The API should recognize that and disallow the time entry from being created, returning an error to the caller. You might inclined to send a response that looks something like this: 1: { 2: "errors": [ {"message" : "The end date must come after the start date"}] 3: } While this may seem like an appropriate thing to do there are a few problems with this approach: What if there is a user somewhere on the other end of the API call that doesn’t speak English? What if the message provided here won’t fit properly within the UI of the application that made the API call? What if the verbiage of the message isn’t consistent with the rest of the application that made the API call? What if there is no user directly on the other end of the API call (e.g. this is a batch job uploading time entries once per night unattended)? The API knows nothing about the context from which the call was made. There are steps you could take to given the API some context (e.g.allow the caller to send along a language code indicating the language that the end user speaks), but that will only get you so far. As the designer of the API you could make some assumptions about how the API will be called, but if we start making assumptions we could very easily make the wrong assumptions. In this situation it’s best to make no assumptions and simply design the API in such a way that the caller has the responsibility to convey error messages in a manner that is appropriate for the context in which the error was raised. You would work around some of these problems by allowing callers to add metadata to each request describing the context from which the call is being made (e.g. accepting a ‘locale’ parameter denoting the desired language), but that will add needless clutter and complexity. It’s better to keep the API simple and push those context-specific concerns down to the caller whenever possible. For our very simple time entry example, this can be done by simply changing our error message response to look like this: 1: { 2: "errors": [ {"code": 100}] 3: } By changing our error error from exposing a string to a numeric code that is easily parseable by another application, we’ve placed all of the responsibility for conveying the actual meaning of the error message on the caller. It’s best to have the caller be responsible for conveying this meaning because the caller understands the context much better than the API does. Now the caller can see error code 100, know that it means that the end date submitted falls before the start date and take appropriate action. Now all of the problems listed out above are non-issues because the caller can simply translate the error code of ‘100’ into the proper action and message for the current context. The numeric code representation of the error is a much better way to facilitate the machine-to-machine interaction that the API is meant to facilitate. An API Does Have Human Users While APIs should be built for machine-to-machine interaction, people still need to wire these interactions together. As a programmer building a client application that will consume the time entry API I would find it frustrating to have to go dig through the API documentation every time I encounter a new error code (assuming the documentation exists and is accurate). The numeric error code approach hurts the discoverability of the API and makes it painful to integrate with. We can help ease this pain by merging our two approaches: 1: { 2: "errors": [ {"code": 100, "message" : "The end date must come after the start date"}] 3: } Now we have an easily parseable numeric error code for the machine-to-machine interaction that the API is meant to facilitate and a human-readable message for programmers working with the API. The human-readable message here is not intended to be viewed by end-users of the API and as such is not really a “localizable string” in my opinion. We could opt to expose a locale parameter for all API methods and store translations for all error messages, but that’s a lot of extra effort and overhead that doesn’t add a lot real value to the API. I might be a bit of an “ugly American”, but I think it’s probably fine to have the API return English messages when the target for those messages is a programmer. When resources are limited (which they always are), I’d argue that you’re better off hard-coding these messages in English and putting more effort into building more useful features, improving security, tweaking performance, etc.

Read the article

CodePlex Daily Summary for Saturday, March 27, 2010

CodePlex Daily Summary for Saturday, March 27, 2010New ProjectsAlter gear SQL index Management: SQL Index management displays a list of indexes available for the chosen database and allows you to select an individual / group of indexes to be r...ASP League Ladder System: An ASP ladder / league system for online gaming league or real life leagues also.Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator is a software suite to promote computer aided strategy planning. Sports team can visualize their strategy usin...Boo syntax highlighting for Visual Studio 2010: Simple syntax hightlighting VSX add-in for Boo language in Visual Studio 2010.easySan: easySan zur einfachen Mitgliedsverwaltung im BRKFsUnit: FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework.Laughing Dog XNA Framework: Laughing Dog is a simple to use, component based 2D framework for XNA game development. At present it is very early in development and as such is f...miniTodo: WPFでMVVMの練習にてきとうに作ったTODOアプリ実用は無理です。My Common Library on .NET with CSharp: My Common Library on .NET with CSharp, it conclude database assecc, encrypt string, data caching, StringUtility, thank you for your view.Native code wrapping using c# : fsutil sparse commands: Ever thought about creating HUGE FILES for future use but felt bad for the wasted memory? Well, SPARSE FILES are the ANSWER! This FSUTIL SPARSE CO...Open SOA Platform: A centralized system for administering applications throught a SOA Enterprise Service Bus: Runtime environment (PROD, DEV, ...) , application and s...P-DBMS: Network and Database ProjectPraiseSight: PraiseSight is supposed to become a practical tool for churches to catalog an present their songs, lyrics and presentations on a beamer. The soluti...Pretty Good Frontend: Pretty Good Frontend is a sample frontend for ConfigMgr (SCCM) 2007 and MDT 2010 Zero Touch. S3Appender (Appender for Log4Net that Uses Amazon S3 For Storing Log Files): The S3Appender is a log4net appender that stores log events in either a MemoryStream or FileStream and sends them to S3 based on time intervals and...sEmit: sEmit (sms emitter) is an application written in C# which was built to send text messages. The project was founded in May 2009 by cansik. It works ...Silverlight RIA Tools: A tool set that generates a full RIA Solutions in Silverlightthommo cannon: Cannon for shooting down ThommosTianjin Polytechnic University Online Judge: Online Judge System Built on Microsoft technologies. Vision & Scope: A distributed OJ Solution on Windows and Cloud. Technologies used or planed...Tinare: Tinare is an byte encryption and decryption alogrithm. The input key is a string password.TinyPlug: Small Plugin Manager, written in C# Allows a project to define supported interfaces, and at runtime add plugins which support (inherit) these in...Utility niconv helps to convert text from one encoding to another: .NET implementation of GUN iconv console converter utility. The niconv program converts text from one encoding to another encoding. In the future r...WareFeed - Software Business Analytics: WareFeed is a simple but effective Software Business Analytics tool written in PHP and compatible others languages such as .NET, Java or Python. It...Y36API1: Semestralni projekt na Y36APINew ReleasesAlter gear SQL index Management: Setup 1.0.0: setup for first alpha releaseASP League Ladder System: ASPLeagueRelease_0_4_1: Release v 0.41Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator: Version 1.0 InstallerAutoAudit: AutoAudit 1.10e: Version 1.10e will be the final iteration of version 1 development. Version 2 will begin adding switches and options. Pleae email your suggestio...Boo syntax highlighting for Visual Studio 2010: Boo syntax VS 2010 - alpha: First release TODO: Multiline comments!Chargify.NET: Chargify.NET 0.6: Updated library, using Metered Components and updated Product information.Composer: V1.0.326.1000 Alpha: Initial Alpha release. Should be stable, with minor issues.CoNatural Components: CoNatural Components 1.6: Code fixes: Created helper classes to generate source code for type mapper/materializer. Fixed issue in optimized type materializer when loading ...CRM External View: 1.2: New Features in v1.2 release Password protected views. No more using Web Data Access role from v1. Filtering capabilities Caching for performan...Designit Video Embed Package: Release 1.1.0 beta1: You can now either have the video embeded directly in the template or have a preview in template that opens the video in a lightbox window.FsUnit: FsUnit 0.9.0 for NUnit: This release is for F# 2.0 and NUnit 2.5+.Laughing Dog XNA Framework: Laughing Dog 0.0.1: Laughing Dog - Alpla - v 0.0.1 First released version of the Laughing Dog framework.LiveUpload to Facebook: LiveUpload to Facebook 3.2: Version 3.2Become a fan on Facebook! Features Quickly and easily upload your photos and videos to Facebook, including any people tags added in Win...MapWindow6: MapWindow 6.0 msi March 26: This version adds the Join feature for creating a new "featureset" with attributes that are joined with attributes from a Excel data label named 'D...Mobile Broadband Logging Monitor: Mobile Broadband Logging Monitor 1.2.2: This edition supports: Newer and older editions of Birdstep Technology's EasyConnect HUAWEI Mobile Partner MWConn User defined location for s...Multiplayer Quiz: Release 1_6_351_0: A beta release of the next version. Please leave any errors in discussions or comments.Native code wrapping using c# : fsutil sparse commands: Fsutil sparse file native code - c sharp wrapper: Project Description A C# code wrapping a native code-Sparse files1 The code is about SPARSE files- the abillity to create huge files (for future us...Nice Libraries: 1.30 build 50325.01: Release 1.30 build 50325.01Pretty Good Frontend: Pretty Good Frontend binaries v1.0: This is the first public release of the Pretty Good Frontend binariesPylor: Pylor 0.1 alpha: This is the very first published version. I hope I can put a sample project soon.Quick Performance Monitor: Version 1.1 refresh: There was a typo or two in the sample batch file. Corrected now.Rapidshare Episode Downloader: RED v0.8.3: 0.8.1 introduced the ability to advance to the next episode. In 0.8.2 a bug was found that if episode number is less then 10, then the preceding 0...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.52: RapidWebDev is an infrastructure helps to develop enterprise software solutions in Microsoft .NET easily and productively. This is the release vers...thommo cannon: game: gamethommo cannon: setup: setupthommo cannon: test: testTinare: Tinare DLL: Tinare DLL is a dynamic-link library written in C# which provides the functions to encrypt and decrypt a byte stream with tinare.WeatherBar: WeatherBar 2.1 [No Installation]: Minor changes to release 2.0 (http://weatherbar.codeplex.com/releases/view/42490). Fixed the bug that caused an exception to be thrown if the user...Most Popular ProjectsMetaSharpRawrWBFS ManagerASP.NET Ajax LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationFarseer Physics Enginepatterns & practices: Composite WPF and SilverlightLINQ to TwitterTable2ClassFluent Ribbon Control SuiteNB_Store - Free DotNetNuke Ecommerce Catalog Module

Search Results

Search found 52798 results on 2112 pages for 'sharepoint web services'.

Page 1585/2112 | < Previous Page | 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 | Next Page >

- by Jonathan

- by JDS

- by Joseph Yancey

- by Mistiry

- by Ross

- by Rick Strahl

- by rajbk

- by Cheers and hth. - Alf

- by DigitalGeekery

- by nmarun

- by Edith Mireles-Oracle

- by sreejukg

- by simonsabin

- by MOSSLover

- by Gregory Burd

- by mbridge

- by Bertrand Le Roy

- by Kevin Grossnicklaus

- by Geoff N. Hiten

- by terje

- by jamiet

- by pinaldave

- by Jesse Taber

< Previous Page | 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 | Next Page >