Search Results

Search found 41582 results on 1664 pages for 'fault tolerance'.

Page 159/1664 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

  • Windows could not update the computer's boot configuration.

    - by Luke Puplett
    Hello, I am trying to install Windows Web Server 2008 x64 (have tried 32-bit, too) onto an IBM eServer 326m and am getting the following error message some time after the unpacking files section: Windows could not update the computer's boot configuration. Installation cannot proceed. I can repair the boot information using the Repair option in the WinPE bit of the setup, and it reboots into the Windows installation, so it has good boot data on the drive. Just to complicate things, the server does not have a DVD-ROM so I'm installing from HDD to HDD, both SATA, one an SSD. I've tried each drive in isolation, e.g. removing the SSD and installing from spindle onto itself, same error every time. Flashed IBM BIOS, too. Thanks for your help. Luke

    Read the article

  • Failing Sata HDD

    - by DaveCol
    I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Installing Application Server Windows Web Server 2008 Enterprise

    - by Levi
    I am just starting out with Web Server 2008 and I am having some trouble working with the Roles Manager. I am working on installing the Application Server using the Roles Manager and what I am running into is that it will run me through the install and then alert me that the install file for .NET 3.0 is not found. ("The source for the specified file was not found. error value: 0x800F081F") I think tried to install 3.0 manually and I was told I cannot do so. So I basically wondering if there was somewhere for me to place the install file so Roles can access it. Thanks Levi

    Read the article

  • How to install Vips on CentOS?

    - by A4J
    I am trying to install Vips on my CentOS box I've downloaded the latest files: wget http://www.vips.ecs.soton.ac.uk/supported/current/vips-7.30.0.tar.gz wget http://www.vips.ecs.soton.ac.uk/supported/current/nip2-7.30.1.tar.gz And on ./configure I get: configure: error: Package requirements (glib-2.0 >= 2.6 gmodule-2.0 >= 2.4 libxml-2.0 gobject-2.0) were not met: No package 'glib-2.0' found No package 'gmodule-2.0' found No package 'gobject-2.0' found However I have tried yum install glib2 and rerun ./configure but get the same error. Am I doing something wrong? Anyone know how to install it correctly on CentOS 6?

    Read the article

  • HAProxy + NodeJS gets stuck on TCP Retransmission

    - by sled
    I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

    Read the article

  • Spam Assassin on windows

    - by ebeworld
    I just installed spam assassin and run for its sample ham mail as spamassassin sample-nonspam.txt, but it ended up marking it as a spam. What configuration am i missing to change? Result of the check is: From: Keith Dawson To: [email protected] Subject: **SPAM** TBTF ping for 2001-04-20: Reviving Date: Fri, 20 Apr 2001 16:59:58 -0400 Message-Id: X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on ebeworld-PC X-Spam-Level: **** X-Spam-Status: Yes, score=10.5 required=6.3 tests=DCC_CHECK,DIGEST_MULTIPLE, DNS_FROM_OPENWHOIS,RAZOR2_CF_RANGE_51_100,RAZOR2_CF_RANGE_E4_51_100, RAZOR2_CHECK shortcircuit=no autolearn=no version=3.2.3 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----------=_4BF17E8E.BF8E0000" This is a multi-part message in MIME format. ------------=_4BF17E8E.BF8E0000 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit This mail is probably spam. The original message has been attached intact in RFC 822 format. Content preview: -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t [...] Content analysis details: (10.5 points, 6.3 required) 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org. 1.5 RAZOR2_CF_RANGE_E4_51_100 Razor2 gives engine 4 confidence level above 50% [cf: 58] 2.5 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 58] 3.6 DCC_CHECK Listed in DCC (http://rhyolite.com/anti-spam/dcc/) 0.0 DIGEST_MULTIPLE Message hits more than one network digest check ------------=_4BF17E8E.BF8E0000 Content-Type: message/rfc822; x-spam-type=original Content-Description: original message before SpamAssassin Content-Disposition: inline Content-Transfer-Encoding: 8bit Return-Path: Delivered-To: [email protected] Received: from europe.std.com (europe.std.com [199.172.62.20]) by mail.netnoteinc.com (Postfix) with ESMTP id 392E1114061 for ; Fri, 20 Apr 2001 21:34:46 +0000 (Eire) Received: (from daemon@localhost) by europe.std.com (8.9.3/8.9.3) id RAA09630 for tbtf-outgoing; Fri, 20 Apr 2001 17:31:18 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA08749 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8278330 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: (from dawson@localhost) by world.std.com (8.9.3/8.9.3) id RAA26781 for [email protected]; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA07541 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8416421 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from [208.192.102.193] (ppp0c199.std.com [208.192.102.199]) by world.std.com (8.9.3/8.9.3) with ESMTP id RAA14226 for ; Fri, 20 Apr 2001 17:12:04 -0400 (EDT) Mime-Version: 1.0 Message-Id: Date: Fri, 20 Apr 2001 16:59:58 -0400 To: [email protected] From: Keith Dawson Subject: TBTF ping for 2001-04-20: Reviving Content-Type: text/plain; charset="us-ascii" Sender: [email protected] Precedence: list Reply-To: [email protected] -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t Timely news of the bellwethers in computer and communications technology that will affect electronic commerce -- since 1994 Your Host: Keith Dawson ISSN: 1524-9948 This issue: < http://tbtf.com/archive/2001-04-20.html > To comment on this issue, please use this forum at Quick Topic: < http://www.quicktopic.com/tbtf/H/kQGJR2TXL6H > ________________________________________________________________________ Q u o t e O f T h e M o m e n t Even organizations that promise "privacy for their customers" rarely if ever promise "continued privacy for their former customers..." Once you cancel your account with any business, their promises of keeping the information about their customers private no longer apply... you're not a customer any longer. This is in the large category of business behaviors that individuals would consider immoral and deceptive -- and businesses know are not illegal. -- "_ankh," writing on the XNStalk mailing list ________________________________________________________________________ ..TBTF's long hiatus is drawing to a close Hail subscribers to the TBTF mailing list. Some 2,000 [1] of you have signed up since the last issue [2] was mailed on 2000-07-20. This brief note is the first of several I will send to this list to excise the dead addresses prior to resuming regular publication. While you time the contractions of the newsletter's rebirth, I in- vite you to read the TBTF Log [3] and sign up for its separate free subscription. Send "subscribe" (no quotes) with any subject to [email protected] . I mail out collected Log items on Sun- days. If you need to stay more immediately on top of breaking stories, pick up the TBTF Log's syndication file [4] or read an aggregator that does. Examples are Slashdot's Cheesy Portal [5], Userland [6], and Sitescooper [7]. If your news obsession runs even deeper and you own an SMS-capable cell phone or PDA, sign up on TBTF's WebWire- lessNow portal [8]. A free call will bring you the latest TBTF Log headline, Jargon Scout [9] find, or Siliconium [10]. Two new columnists have bloomed on TBTF since last summer: Ted By- field's roving_reporter [11] and Gary Stock's UnBlinking [12]. Late- ly Byfield has been writing in unmatched depth about ICANN, but the roving_reporter nym's roots are in commentary at the intersection of technology and culture. Stock's UnBlinking latches onto topical sub- jects and pursues them to the ends of the Net. These writers' voices are compelling and utterly distinctive. [1] http://tbtf.com/growth.html [2] http://tbtf.com/archive/2000-07-20.html [3] http://tbtf.com/blog/ [4] http://tbtf.com/tbtf.rdf [5] http://www.slashdot.org/cheesyportal.shtml [6] http://my.userland.com/ [7] http://www.sitescooper.org/ [8] http://tbtf.com/pull-wwn/ [9] http://tbtf.com/jargon-scout.html [10] http://tbtf.com/siliconia.html [11] http://tbtf.com/roving_reporter/ [12] http://tbtf.com/unblinking/ ________________________________________________________________________ S o u r c e s For a complete list of TBTF's email and Web sources, see http://tbtf.com/sources.html . ________________________________________ B e n e f a c t o r s TBTF is free. If you get value from this publication, please visit the TBTF Benefactors page < http://tbtf.com/the-benefactors.html > and consider contributing to its upkeep. ________________________________________________________________________ TBTF home and archive at http://tbtf.com/ . To unsubscribe send the message "unsubscribe" to [email protected]. TBTF is Copy- right 1994-2000 by Keith Dawson, <[email protected]>. Commercial use prohibited. For non-commercial purposes please forward, post, and link as you see fit. _______________________________________________ Keith Dawson [email protected] Layer of ash separates morning and evening milk. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.2 for non-commercial use http://www.pgp.com iQCVAwUBOuCi3WAMawgf2iXRAQHeAQQA3YSePSQ0XzdHZUVskFDkTfpE9XS4fHQs WaT6a8qLZK9PdNcoz3zggM/Jnjdx6CJqNzxPEtxk9B2DoGll/C/60HWNPN+VujDu Xav65S0P+Px4knaQcCIeCamQJ7uGcsw+CqMpNbxWYaTYmjAfkbKH1EuLC2VRwdmD wQmwrDp70v8= =8hLB -----END PGP SIGNATURE----- ------------=_4BF17E8E.BF8E0000--

    Read the article

  • Error 1720 with Virtuozzo Trying to Install Containers 4.6

    - by Kort Pleco
    So, somehow my virtuozzo installation was corrupted, and it didn't fully uninstall. I'm trying to reinstall Virtuozzo Containers 4.6 and it fails with this error: Error 1720.There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action SetFolders_x64 script error -2147024894, WshShell.RegRead: Invalid root in registry key "HKLM\SOFTWARE\SWSoft\Virtuozzo\VZINSTALL". Line 7, Column 2 Help?

    Read the article

  • Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

    - by Srekel
    I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either.

    Read the article

  • openstack, bridging, netfilter and dnat

    - by Craig Sanders
    In a recent upgrade (from Openstack Diablo on Ubuntu Lucid to Openstack Essex on Ubuntu Precise), we found that DNS packets were frequently (almost always) dropped on the bridge interface (br100). For our compute-node hosts, that's a Mellanox MT26428 using the mlx4_en driver module. We've found two workarounds for this: Use an old lucid kernel (e.g. 2.6.32-41-generic). This causes other problems, in particular the lack of cgroups and the old version of the kvm and kvm_amd modules (we suspect the kvm module version is the source of a bug we're seeing where occasionally a VM will use 100% CPU). We've been running with this for the last few months, but can't stay here forever. With the newer Ubuntu Precise kernels (3.2.x), we've found that if we use sysctl to disable netfilter on bridge (see sysctl settings below) that DNS started working perfectly again. We thought this was the solution to our problem until we realised that turning off netfilter on the bridge interface will, of course, mean that the DNAT rule to redirect VM requests for the nova-api-metadata server (i.e. redirect packets destined for 169.254.169.254:80 to compute-node's-IP:8775) will be completely bypassed. Long-story short: with 3.x kernels, we can have reliable networking and broken metadata service or we can have broken networking and a metadata service that would work fine if there were any VMs to service. We haven't yet found a way to have both. Anyone seen this problem or anything like it before? got a fix? or a pointer in the right direction? Our suspicion is that it's specific to the Mellanox driver, but we're not sure of that (we've tried several different versions of the mlx4_en driver, starting with the version built-in to the 3.2.x kernels all the way up to the latest 1.5.8.3 driver from the mellanox web site. The mlx4_en driver in the 3.5.x kernel from Quantal doesn't work at all) BTW, our compute nodes have supermicro H8DGT motherboards with built-in mellanox NIC: 02:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s - IB QDR / 10GigE] (rev b0) we're not using the other two NICs in the system, only the Mellanox and the IPMI card are connected. Bridge netfilter sysctl settings: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 Since discovering this bridge-nf sysctl workaround, we've found a few pages on the net recommending exactly this (including Openstack's latest network troubleshooting page and a launchpad bug report that linked to this blog-post that has a great description of the problem and the solution)....it's easier to find stuff when you know what to search for :), but we haven't found anything on the DNAT issue that it causes.

    Read the article

  • What is the standard way to deploy memcached?

    - by Tom
    I have two IIS servers and two MySQL servers. On all servers I have some available memory (More than a GB). What is the standard way to deploy memcached? Should I add a new server especially for memcached, or should I use my existing servers? If so, which servers? Thanks in advance

    Read the article

  • convert bat to sh

    - by Cris
    I am totally new to scripting in linux...so i want to port some simple window bat files to ubuntu. First file is easy setenv.bat set ANT_HOME=c:\ant\apache-ant-1.7.1 set JAVA_HOME=c:\java in linux i did this and it seems ok setenv.sh #!/bin/bash JAVA_HOME=/usr/lib/jvm/java-6-sun-1.6.0.24/ ANT_HOME=/usr/share/ant echo $JAVA_HOME echo $ANT_HOME but now i want to port this bat file: startserver.bat call ../config/setenv call %ANT_HOME%/bin/ant -f ../config/common.xml start_db call %ANT_HOME%/bin/ant -f ../config/common.xml start_server pause but i have no clue how can i do this in linux call ../config/setenv thank you for any help , direction given.

    Read the article

  • VPN IP Routing - slow connections

    - by dannymcc
    UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials out to the other one. Main Practice - 192.168.1.0/24 Branch - 192.168.3.0/24 I have then set (on the Branch) router the following route: 192.168.1.0/24 If I then request a server running on 192.168.1.1 from the Branch, it correctly routes through VPN tunnel. If I request the branch server at 192.168.3.1 it correctly routes to the local server without using the VPN tunnel. I have temporarily disabled the firewall on both routers, and made sure that QoS is disabled. The Main Practice internet connection is ~30mb down / ~10mb up, and the Branch connection is ~5mb down / ~2mb up. Anything over the VPN tunnel runs pretty slowly (VNC, Remote Desktop and Terminal Emulators). However, if I dial using the Windows VPN wizard, creating a connection from the laptop to the Main Practice - everything runs quickly. I'm looking for possible causes, and/or ways of further diagnosing the issue. Any help would be greatly appreciated! UPDATE: In summary, when I connect within the Branch and try and access a host that's within the Main Practice it works, but slowly. If I then dial the VPN on my Windows 7 laptop whilst still connected to the Branch network, it's fast. Main Practice Branch Practice Routing Table from Branch Router Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 126.256.126.103 WAN2 C~ 192.168.1.99/ 255.255.255.255 directly connected VPN-1 S~ 192.168.1.0/ 255.255.255.0 via 192.168.1.99 VPN-1 S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.99 VPN-1 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2 C 126.256.126.103/ 255.255.255.224 directly connected WAN2 Routing Table from Main Practice Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 81.139.64.1, WAN2 S 81.137.176.1/ 255.255.255.255 via 81.137.176.1, WAN2 * 81.139.64.1/ 255.255.255.255 via 81.139.64.1, WAN2 C~ 192.168.1.204/ 255.255.255.255 is directly connected, VPN C~ 192.168.1.0/ 255.255.255.0 is directly connected, LAN S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.204, VPN S~ 192.168.3.0/ 255.255.255.0 via 192.168.1.203, VPN Connection Details (from Branch Router) Connection Details (from Main Practice Router) IPERF.exe Output

    Read the article

  • Is there a way to add AD LDS users to an AD Domain Group or allow them domain security rights?

    - by Tom
    I have a web application in which our outside customers need access to run transactions (stored procs on Sql Server) on our domain. We have looked into LDS to keep these users separate from our domain. The problem we are having is allowing the LDS users the AD security rights to access these stored procs. For administration purposes we would like to use an AD group for each transaction (stored proc) which has access to execute. Is there a way to add LDS users to this AD group or allow them the security rights to do this? We have setup LDS and can authenicate an AD user thru to runs these transactions. LDS is running on Server 08 R2. AD is also Server 08 R2. Thanks.

    Read the article

  • Slow VM on esxi 4.1

    - by user57432
    We have a FreeBSD 64bit running on a esxi 4.1, the hardware platform is a DELL R710 with 2 x 56xx (intel 6core cpu) and 48 GB ram. The FreeBSD vm is very slow, when we compiles/builds something on it, it takes 5 minuts and it says "build time 18 seconds.". There's no vmtools installed on the vm. The same vm is installaed on another R710 running esxi 4.0 for dell and there's no problems with that one. Does anyone have any idea about what to look for? the VMs on the second server (ESXi 4.1) is a clone of the VMs running on the first VMserver (ESXi 4.0 Dell edition). It's not possible for me to move the VM back to the first server since the file contaning the vm is too big. We installed the new esxi with a datasore with 8mb blocks because 1mb blocks dident allow for the file size we needed. It looks like the www server on the new ESXi 4.1 works fine, but I havent really tested it. There's not installed vmtools on any of the VMs (FreeBSD). The block size on the second VM (ESXi 4.1) datastorage is 8mb and 1mb on the first (ESXi 4.0)

    Read the article

  • Cannot receive email outside domain with Microsoft Exchange

    - by Adi
    This morning we couldn't receive email from outside our company's domain (domain.com.au), but we can send email to outside (e.g hotmail, gmail, yahoo). When I tried to send email to my work email address using my gmail account, I received this message Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unable to relay for [email protected] (state 14). I tried using telnet to send email, and it works. But still I couldn't figure out why I can't receive email from outside. I'm not sure if I provided enough info. I'll try to provide as much info as needed to help me solve the problem. Thanks

    Read the article

  • Using naked domain in apache, no "www" on domain in httpd.conf

    - by chrsdgtl
    Incredibly there is no good tutorial or easy reference guide for using naked domains (no subdomain) as the primary URI online that I could find. I'm trying to configure this to happen in my httpd.conf in apache. Since I'm still a relative newb to this server stuff, trying to figure it out myself all I could do was configure some nasty redirect loops and error 400's. There's plenty of notes for the more common: http:// -- https:// and naked to -- www. and a ton of .htaccess stuff (not interested) What I want is http://www.domain.com -- http://domain.com The most helpful thing I found was this: Multiple domains (including www-"subdomain") on apache? I ended using the solution mentioned by ceejayoz in that post that some folks noted was messy and complicated because it got the desired result but I'd like to know the best practice for this in the future. I'd appreciate a nudge in the right direction. Thanks in advance.

    Read the article

  • Reverse proxy with SSL and IP passthrough?

    - by Paul
    Turns out that the IP of a much-needed new website is blocked from inside our organization's network for reasons that will take weeks to fix. In the meantime, could we set up a reverse proxy on an Internet-based server which will forward SSL traffic and perhaps client IPs to the external site? Load will be light. No need to terminate SSL on the proxy. We may be able to poison DNS so original URL can work. How do I learn if I need URL rewriting? Squid/apache/nginx/something else? Setup would be fastest on Win 2000, but other OSes are OK if that would help. Simple and quick are good since it's a temporary solution. Thanks for your thoughts!

    Read the article

  • Windows 7 IIS problem

    - by Carlo
    Hi, the thing is that I just installed IIS in my Windows 7 computer to test it out, but I'm getting this error as soon as I try to load the localhost on my web browser: Service Unavailable HTTP Error 503. The service is unavailable. I found this solution but it didn't work. Anyone has an idea of what's going on? Thanks! More Info: I checked on the Application Pools, as soon as I go to http://localhost/ it stops the application pool of thw website I try.

    Read the article

  • Crash dump analysis

    - by Ryan Ries
    I hope this isn't a stupid question, and if it is, then I want to at least get it over with so I don't feel so dumb in the future. Here we are, loading up a Windows crash dump with Windbg. Here are the first few lines of the debugger output: 0: kd> .dumpdebug ----- 64 bit Kernel Summary Dump Analysis DUMP_HEADER64: MajorVersion 0000000f MinorVersion 00001db1 ... The MinorVersion I mostly understand. It's hexadecimal and it translates to 7601 in decimal. Windows admins would already be able to tell from that that this must be either a Win7 x64 machine or a 2k8 R2 machine with SP1. But isn't 7601 the build number? It's supposed to be Major.Minor.Build/Revision... right? Also I don't understand the MajorVersion. It should be 6. This version of Windows is 6. But isn't 0000000f in hexadecimal 15 in decimal? The full version string of this version of Windows, when you launch the Command Prompt for instance, is 6.1.7601. If 7601 is the MinorVersion, then what is 1 and what is 6? And why does the crash dump say 0F?

    Read the article

  • Postfix on IspCP cannot send to google apps mail if it is in the same domain

    - by Evan Sap
    In my vps setup I have ispcp omega 1.0.7 installed. Everything works fine except the fact that postfix cannot send to google apps mail when the domain of google apps is also registered in ispcp. Postfix sends an email to normal addresses (hotmail, yahoo, gmail etc). I use external dns. There is also a discussion I started in the ispcp forum here .mail.log file provides these messages: mail for exampledomain.gr loops back to myself". postfix/bounce: sender non-delivery notification. postfix/qmgr: removed Any help would be appreciated.

    Read the article

  • How to configure Users permissions in Windows Server 2008 R2 by command line?

    - by Répás
    I have to create about 800 users in our Windows S 2008 R2 and I'd like to make a few settings with them. Create user: net user Joe 1mb4pASs /add /fullname:"John Smith" /passwordchg:no /comment:"no comment" Set never expired password: wmic useraccount where "Name='Joe'" set PasswordExpires=FALSE Add the user to two groups (like in the Members Of tab in the GUI) Remote Desktop Users (I translated it from hungarian, because the server) Terminal Services - Computers to enable the use of applications via webaccess Step 3 is where I'm having problems. What command(s) should I use for this?

    Read the article

  • Adding Hyper-V Role Errors

    - by Brian
    Hello, I have a Win 2008 R2 Data Center machine, and when I added the Hyper-V role, I got the following errors: 'Hypervisor' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role. Hyper-V launch failed; Either VMX not present or not enabled in BIOS. ANy help would be appreciated as I am a n00b to the server world. Thanks.

    Read the article

  • Can we manage incoming call number landing on asterisk?

    - by user194469
    I am using Asterisk 1.4.2 in two different machine. I have configured some extensions in asterisk. When any caller, dial my extension number with local number then if I see asterisk console (asterisk -r) then incoming number is starting with 0, but if caller dial same extension number using STD number then in asterisk console (asterisk -r), incoming number is staring with 0091 (here 91 is country code). Could I change this setting or is there any standard for asterisk for local, STD or ISD number?

    Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >