Search Results

Search found 4802 results on 193 pages for 'wordpress hack'.

Page 159/193 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

  • Intermittently uncommunicative subnets

    - by mhd
    Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

    Read the article

  • Umbrella websites with Microsites & Blogs - recommendations

    - by pingu
    Hi guys, I'm in the process of scoping a solution for an events organisation. Their main website features information about them and blog entries etc, but they hold major events which require microsites (domain.com/event). The microsites all have a different look-and-feel, different nav structure, and custom content-managed components. The one thing that's common across everything is the blog - it will have a category for each event under which users can post. How would you guys implement this? The solution needs to be PHP, and my initial thought was CodeIgniter but if possible I'd like to avoid building the blog functionality - so I guess I could integrate it with EE or Wordpress. If anyone has any other suggestions they would be most appreciated.

    Read the article

  • Mod_Rewrite: Testing URL got indexed in Google - How do I create a proper 301 redirect?

    - by Jonathan Wold
    I worked on a website for which I had a "development URL" that looked something like this: www.domainname.com.php5-9.dfw1-2.websitetestlink.com/ Now, several weeks after the website launch, there is at least one page of content indexed on Google with that URL. Question: How do I redirect all requests from that test URL to reroute to the actual domain? So, for instance, I would want: www.domainname.com.php5-9.dfw1-2.websitetestlink.com/page-name To go to: www.domainname.com/page-name The website is powered by WordPress and hosted on a PHP server. I've experimented with .htaccess without much success.

    Read the article

  • Converting Audio To Video Output and Attaching Text?

    - by ZeeMan
    I am currently working on a project and before i get started i thought it'd be nice to check with stackOverflow community, and see maybe they can help me with this. The Idea: I have about a thousand MP3 files that i need to convert into Video files to be upload on Youtube for my work. Here is where it gets tricky i need to also attach the Text associated with the Audio to the Video as an Image. I was thinking .ppt. The Problem: I can do this one audio file at a time but it would take me a zillion years. lol!! The Question: Can I Create Some Kind Of Program Using Let's Say XML or JavaScript Or XHTML or some other programming language to do a MASS content creation and all i have to do is feed it the Information?? possibly a script?? or is it possible to create an example .ppt file and then hack it so that i can have it reproduce itself with different information?? The Note: Thanks U In Advance For Helping Out!!! Regards, ZeeMan!!!

    Read the article

  • Anonymous Login attemps from IPs all over Asia, how do I stop them from being able to do this?

    - by Ryan
    We had a successful hack attempt from Russia and one of our servers was used as a staging ground for further attacks, actually somehow they managed to get access to a Windows account called 'services'. I took that server offline as it was our SMTP server and no longer need it (3rd party system in place now). Now some of our other servers are having these ANONYMOUS LOGIN attempts in the Event Viewer that have IP addresses coming from China, Romania, Italy (I guess there's some Europe in there too)... I don't know what these people want but they just keep hitting the server. How can I prevent this? I don't want our servers compromised again, last time our host took our entire hardware node off of the network because it was attacking other systems, causing our services to go down which is really bad. How can I prevent these strange IP addresses from trying to access my servers? They are Windows Server 2003 R2 Enterprise 'containers' (virtual machines) running on a Parallels Virtuozzo HW node, if that makes a difference. I can configure each machine individually as if it were it's own server of course... UPDATE: New login attempts still happening, now these ones are tracing back to Ukraine... WTF.. here is the Event: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB4FEB30C) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: REANIMAT-328817 Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 94.179.189.117 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is one from France I found too: Event Type: Success Audit Event Source: Security Event Category: Logon/Logoff Event ID: 540 Date: 1/20/2011 Time: 11:09:50 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: QA Description: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB35D8539) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: COMPUTER Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 82.238.39.154 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • MVC - Loading DLL programmactically

    - by mikechats
    I'm trying to implement a plugable architecture in asp.net MVC. I have based my modules on the following article - http://www.wynia.org/wordpress/2008/12/aspnet-mvc-plugins. I have a DLL that contains a simple controller, and a view. The view is an embedded resource within the DLL. The problem I'm having is, if I drop the DLL in the bin directory of my MVC application manually, then everything works perfectly i.e. the assembly loads correctly. But when I copy the DLL from a file upload input box (via a web form) into the bin directoy, I get an error (The module was expected to contain an assembly manifest.) when trying to load the assembly. I use the same DLL, what could the problem be?

    Read the article

  • Lines-of-code counting for many C# solutions

    - by Eric
    I am currently researching a solution for counting lines of code in C#. I pretty much need a combination of the following two tools: http://richnewman.wordpress.com/2007/07/01/c-and-vbnet-line-count-utility/ http://www.locmetrics.com/index.html My problem is that I need to recursively scan a folder containing a lot of visual studio solutions. So can't really use the first tool without any major work on its code, as it's only able to scan a single solution at a time. But I also need to split the results for each solution, preferably even the contained projects. This disqualifies the second tool I found. I also found NDepend which suffers from the same problem. Do you know of any free tools that do what I need? I am unable to find anything suitable.

    Read the article

  • Create a "inset" effect using CSS in websites

    - by Aakash Chakravarthy
    Hello, I am very much impressed by the "inset" like effect in many latest websites. Some examples are and The line in the center. Nowadays, many websites use these kinds of lines/effects. I tried to achieve the same with borders but the color combination is not working me and it is not proper. Do other websites use images for these ? is it easy to this ? Any example css ? Example sites: http://woothemes.com, http://net.tutsplus.com/ , http://www.w3schools.com (in the header) and in wordpress admin page sidebar

    Read the article

  • PHP float bug: PHP Hangs On Numeric Value

    - by jeroen
    I just read an interesting article about php hanging on certain float numbers, see The Register and Exploring Binary. I never explicitly use floats, I use number_format() to clean my input and display for example prices. Also, as far as I am aware, all input from for example forms are strings until I tell them otherwise so I am supposing that this problem does not affect me. Am I right, or do I need to check for example Wordpress and Squirrelmail installations on my server to see if they cast anything to float? Or better, grep all php files on my servers for float?

    Read the article

  • Using Flot's Bar Graph in an Android WebView with Highlighting

    - by Nicholi
    The issue is unhighlighting bars which are no longer selected in a bar graph plotted by flot in a WebView on Android. Got no other issues drawing the actual graphs (which look beautiful for something so simple btw). I am not extremely knowledgeable in terms of javascript and web design/development but it seems little should have been needed, if it would just work!! :( I believe I'm following the Flot API correctly, if not someone please scream and yell at me. It seems to work just fine in a non-mobile browser at least. Hoping someone has done this before, but if not I've got the minimal necessary code to poke at your droids if inquiring minds would like to test. I've tested on two Nexus Ones (both 2.2.1), and have tried targeting with Andriod 1.5 and 2.2 SDKs (my intention is to target 1.5 if possible). I've been attempting to hack away at this for far too long on my own now. What happens: 1. Graph loads fine with bars. All bars unhighlighted. 2. Select a bar in graph, gets highlighted fine (and a tooltip is placed). 3. Select a different bar in graph, old bar is unhighlighted, old tooltip removed, new bar highlighted and tooltip placed (still no problems). 4. Click in the vast darkness of the graph which should then unhighlight the last bar... but it doesn't. I've tried disabling flot's autohighlight and manually doing it as well to no avail. Looking into flot itself and only getting down to drawOverlay() where the issue seems to begin... An even more disturbing bug(?) appears if the fill bar option is enabled in the graph, but I'd rather just forget about that for now. Also grabbed the latest version of flot from their svn (r290), but made no different from last public release (v0.6). As a complete guess I'm thinking it's an issue with WebKit's javascript implementation (or something specific to Nexus Ones, which wouldn't be so bad), but if there is any ugly hack to just get it to work I'm all ears. I've thrown the graph data directly into the html/js, rather than deal with showing all the code involved in the Java-javascript handler and callbacks. The simple html placed in 'assets/flot/test/' with jquery.js and jquery.flot.js: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <script src="jquery.js"></script> <script src="jquery.flot.js"></script> <script id="source" language="javascript" type="text/javascript"> var lastItem = null; var plot = null; $(document).ready(function () { //window.testhandler.loadGraph(); // bind plotclick here $("#graphHolder").bind("plotclick", function (event, pos, item) { if (item) { var lastPoint = null; if (lastItem != null) lastPoint = lastItem.datapoint; if (!pointEquals(lastPoint, item.datapoint)) { //if (lastItem != null) // plot.unhighlight(lastItem.series, lastItem.datapoint); lastItem = item; $("#tooltip").remove(); //plot.highlight(item.series, item.datapoint); showTooltip(item.pageX, item.pageY, item.datapoint[1]); } } else if (lastItem != null) { plot.unhighlight(lastItem.series, lastItem.datapoint); // not unhighlighting anything //plot.unhighlight(); // doesn't work either, supposed to unhighlight everything lastItem = null; $("#tooltip").remove(); } }); GotGraph(); }); /** * Show a tooltip above bar in graph * @param {int} x Left coordinate of div * @param {int} y Top coordinate of div * @param {String} contents text to place in div */ function showTooltip(x, y, contents) { $('<div id="tooltip">' + contents + '</div>').css( { position: 'absolute', display: 'none', top: y, left: x, border: '1px solid #fdd', padding: '2px', 'background-color': '#fee', opacity: 0.80 }).appendTo("body").fadeIn(200); } /** * Draw the graph. This is a callback which will be called by Java * * @param {Object} seriesData * @param {Object} seriesOptions */ function GotGraph() { //seriesData, seriesOptions) { var seriesData = [{ "bars":{"lineWidth":2,"show":true,"barWidth":86400000,"align":"center","fill":false}, "data":[[1288569600000,10],[1288656000000,5],[1288742400000,12],[1288828800000,20],[1288915200000,14],[1289001600000,3],[1289174400000,22],[1289260800000,20],[1289347200000,10],[1289433600000,5],[1289520000000,12],[1289606400000,20],[1289692800000,14],[1289779200000,35]]}]; var seriesOptions = { "xaxis":{"twelveHourClock":false,"minTickSize":[1,"day"],"tickSize":[1,"day"],"timeformat":"%d","mode":"time"}, "yaxis":{"min":0}, "grid":{"clickable":true,"autoHighlight":true,"hoverable":false}}; plot = $.plot($("#graphHolder"), seriesData, seriesOptions); } function pointEquals(point1, point2) { if (point1 != null && point2 != null && typeof(point1) == typeof(point2) && point1.length == point2.length) { var i; for (i=0;i<point1.length;i++) { if (point1[i] != point2[i]) { return false; } } return true; } return false; } </script> </head> <body> <div id="graphHolder" STYLE="height:200px;width:400px"></div> </body> </html> The minimal amount of code necessary in onCreate in startup activity: @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); WebView mytestView = new WebView(this); mytestView.setLayoutParams(new LayoutParams(LayoutParams.FILL_PARENT, LayoutParams.FILL_PARENT)); setContentView(mytestView); mytestView.setBackgroundColor(0); mytestView.getSettings().setJavaScriptEnabled(true); mytestView.setClickable(true); mytestView.setFocusable(false); mytestView.setFocusableInTouchMode(false); mytestView.loadUrl("file:///android_asset/flot/test/stats_graph.html"); }

    Read the article

  • 7-Zip many files from different folders?

    - by mafutrct
    I would like to add a large number of files with different names from different folders to a single 7-Zip archive using 7za.exe. This should be simple, but it turned out to be a major pain. I created a file that contains the paths (7za a out.7z @list.txt), but once there are too many (~100) files, it fails. Apparently the content of the argument file is pushed onto the command line buffer [Edit: This was likely a misinformation on my part, either way it was not the reason], which is far too small (the number of files to add is more than one million). Splitting the process up by adding the files one by one is not feasible due to the way 7za works: When adding the next file, it creates a copy of the archive, adds the file to the copy and finally replaces the original. This is terribly slow once the archive gets to a couple 100 MB in size. So far I am using a combination of the two approaches by adding a dozen files each time in a loop, but it is an unreliable hack and still very slow. Is there a better way to do it? I tried to use 7-Zip wrapper DLLs (I'm a C# programmer), but none of them worked reliably and I was repeatedly suggested to just use 7za instead.

    Read the article

  • Zip up groups of webpages for viewing in the browser

    - by Arlen Beiler
    I think there should be a standard for saving and viewing bunches of webpages as a website. For instance, say I have a whole bunch of pages, such as I get from the WordPress plugin "Really Static" (which saves the entire site), and I have all the links start with a slash (to make linking to supporting files easier). Now, I can't really use those links if I am reading it from the file system. If there would be a standard where we could zip up files, give them a unique extension (like "hzip" for html zip), and open the file with any browser, which would display it as though the root of that file were the root of the pages. "file://examplefile.hzip/" The links would then all work. This would really help sharing and copying groups of webpages. Is this a good idea? A bad one? What do you think?

    Read the article

  • CSS Only Selecting Certain Classes

    - by Greg
    Hi I'm working with a Wordpress template. I have a separate template page for the blog section. On the other pages of the site I have class that works fine and looks like this .post header h2 { display:none; } On the blog page, I add this to the CSS and it works as it should #main .post header h2 { display:block; } However if I try that with other classes like #main .wrapper { background-color:#000000; } Nothing happens. I've tried adding !important, I've also tried writing like such body.page-id-15 #main .wrapper { background-color:#000000; } with no luck. Here is a link to the site. http://gregtregunno.ca/news

    Read the article

  • Migrating from one linux install to another: How to keep the second disk around?

    - by Jim Miller
    I've got a linux box running Fedora 19 that I want to move to CentOS 6.4. Rather than trying to do something fancy with the current disk (which has also accumulated a lot of sludge over the years), I'm going to get a new disk, put CentOS on that, and then move the to-be-preserved bits of stuff from the old disk to the new one. I haven't done this yet, but I presume it should be semi-straightforward -- do the CentOS install on the new disk, mount the old disk on /olddisk or somesuch, and start copying. However, I'm not sure how to handle getting the machine to recognize the new empty disk as the target of the CentOS install (I suppose I can just pull the old disk during the installation), remember that this is the intended boot disk once the install has happened), and tweak /etc/fstab (right?) to set up the old disk on the desired mount point. (Both disks are, or will be, SATA.) I could probably hack it together without losing too much hair or doing too much damage, but could anyone offer some advice that would get/keep me on the right track? Thanks!

    Read the article

  • Using Array Variables For FILE_GET_CONTENTS

    - by Whoshooter
    I have a script all done now and everything has been debugged and it works, except for the last hurdle. This script grabs pertinent information on bank web sites, takes that data and uses it to populate a template and then it's all posted to Wordpress - BUT I get an error because the file_get_contents function fails taking each url from the Array. I've var_dumped the array and all the URLS are there in the [0] key, so this is what I tried. master data is the scraped URL source the script uses urlscrape_array is the collection of URLS $master_data = file_get_contents($urlscrape_array[0]); When I run the script using a URL like below it works beautifully every time; $master_data = file_get_contents("http://www.somesite/somepage.html"); This is the error I get when I try to use the first example' Warning: file_get_contents() expects parameter 1 to be string, array given in /home3/path/public_html/mysite.com/boise_project/scriptmainpage.php on line 13 As requested here is a sample of the var_dump on $urlscrape_array[0] array(504) { [0]=> string(56) "http://www.somepage.com/somepage-3178.html" [1]=> string(54) "http://www.somepage.com/somepage-16.html" [2]=> string(56) "http://www.somepage.com/somepage-3202.html" [3]=> string(56) "http://www.somepage.com/somepage-4324.html" [4]=> string(56) "http://www.somepage.com/somepage-4777.html" [5]=> string(56) "http://www.somepage.com/somepage-5140.html" [6]=> string(56) "http://www.somepage.com/somepage-5220.html" [7]=> string(56) "http://www.somepage.com/somepage-9205.html" [8]=> string(56) "http://www.somepage.com/somepage-3251.html" [9]=> string(56) "http://www.somepage.com/somepage-3323.html" [10]=> string(56) "http://www.somepage.com/some-page-3797.html" [11]=> string(56) "http://www.somepage.com/some-page-4145.html" [12]=> string(56) "http://www.somepage.com/some-page-3191.html" [13]=> string(55) "http://www.somepage.com/some-page-329.html" [14]=> string(56) etc.... Error as per the foreach statement provided by Uptown Warning: Invalid argument supplied for foreach() in /home3/bettyt45/public_html/bdbud.com/boise_project/boise-wordpress.php on line 12 NULL print_r resulst below; Array ( [0] => Array ( [0] => http://www.somesite.com/some-page-3178.html [1] => http://www.somesite.com/some-page-16.html [2] => http://www.somesite.com/some-page-3202.html [3] => http://www.somesite.com/some-page-4324.html [4] => http://www.somesite.com/some-page-4777.html [5] => http://www.somesite.com/some-page-5140.html [6] => http://www.somesite.com/some-page-5220.html [7] => http://www.somesite.com/some-page-9205.html [8] => http://www.somesite.com/some-page-3251.html [9] => http://www.somesite.com/some-page-3323.html [10] => http://www.somesite.com/some-page-3797.html [11] => http://www.somesite.com/some-page-4145.html [12] => http://www.somesite.com/some-page-3191.html [13] => http://www.somesite.com/some-page-329.html [14] => http://www.somesite.com/some-page-3341.html [15] => http://www.somesite.com/some-page-3758.html [16] => http://www.somesite.com/some-page-4180.html [17] => http://www.somesite.com/some-page-9014.html [18] => http://www.somesite.com/some-page-5987.html [19] => http://www.somesite.com/some-page-1542.html [20] => http://www.somesite.com/some-page-3004.html [21] => http://www.somesite.com/some-page-9034.html [22] => http://www.somesite.com/some-page-3385.html [23] => http://www.somesite.com/some-page-3435.html [24] => http://www.somesite.com/some-page-6389.html [25] => http://www.somesite.com/some-page-6992.html [26] => http://www.somesite.com/some-page-7051.html HERE IS THE CODE I USED TO CREATE THE ARRAY ABOVE; $urlscrape_data = file_get_contents('http://www.bdbud.com/boise_project/boise-urls.htm'); preg_match_all('~http\:\/\/www.creditunionsonline.com\/credit\-union\-\d{1,4}?\.html~', $urlscrape_data, $urlscrape_matches); $urlscrape_array = $urlscrape_matches;

    Read the article

  • Formatting pwd/ls for use with scp

    - by eumiro
    I have two terminal windows with bash. One is local on the client computer, another one has an SSH-session on the server. On the server, I am in a directory and seeing a file I would like to copy to my client using scp from the client. On the server I see: user@server:/path$ ls filename filename I can now type scp in the client shell, select and copy the user@server:/path from the server shell and paste to the client shell, then type slash and copy and paste the filename and append a dot to get: user@client:~$ scp user@server:/path/filename . to scp a file from the server to the client. Now I am searching for a command on the server, that would work like this: user@server:/path$ special_ls filename user@server:/path/filename which would give me the complete scp-ready string to copy&paste to the client shell. Something in the form echo $USER@$HOSTNAME:${pwd}/$filename working with relative/absolute paths. Is there any such command/switch combination or do I have to hack it myself? Thank you very much.

    Read the article

  • How to get or make a WPF WebBrowser with a visual.

    - by Trainee4Life
    Having problems related to WPF WebBrowser not having a visual. Reason being, that it actually a wrapper around the winforms browser. Anyways, I searched the web for any solution to this problem, and got hold of the following suggestions: http://chriscavanagh.wordpress.com/2009/08/25/a-real-wpf-webbrowser/ http://rob.runtothehills.org/archives/60 The first one solves everything, but seems like an overkill. Plus, the dll's should be licensed for commercial use. The second one seems simple, but not able to figure out when to refresh the screen. Plus there's so much to do like sending mouse and keyboard messages to the webbrowser. P.S. The problem I'm trying to solve is to show the same webbrowser on different windows. They both must be interactive, and always in sync visually.

    Read the article

  • CMS + Blog engines for personal website

    - by Shawn Mclean
    I want to create a personal website where I show off my work, write blog posts, etc. I dont want to create my own, but I'm seeking one flexible enough for me to write my own codes for it if needed. For eg, I'd like to create a page with jquery functionality and backend code. Features I'm looking for: Blog engine similiar to wordpress OpenId login (comments, etc) Exporting content in an event I want to switch engines. I have alot of knowledge in .net and small amount in php, so any of these frameworks can work for me.

    Read the article

  • Compare TinyMCE and CKeditor for a Wiki

    - by Lakshman Prasad
    For a custom wiki django-wakawaka, i want to be able to add a WYSIWYG support. TinyMCE is obviously the most popular plugin, used even by Wordpress. But CK-editor seems more feature full. Those who have used either of these or both, which is better and why. Are there some better packages, that I am missing? Is there something that I am missing when I conclude CKeditor is better, by going through them (because it is not as widely used). I want to use it with django and jquery, with multiple instances of WYSIWYG widget per page. Does one offer advantage over the other.

    Read the article

  • Suggestions for a very easy to edit CMS?

    - by jdshipengrover
    I need advice/suggestions. At my place of work - we have a large data set. We would like to server the data up as editable html pages. (Its mostly lists of simple text) We would like to add data, change it's order, update text etc...from the editable pages. It has to have a pretty low bar for usability and WYSIWYG is a must. The folks who will edit are not programmers by a long shot. We are not sure Wiki will work. It might have to do - but not sure. Changes have to be tracked and written back into the DB I am thinking some kind of open source CMS might work? Wordpress, Joomla, Drupal - something that can get us up and running pretty quickly. I really am open to suggestions - not sure where to begin on this one. Thanks all

    Read the article

  • Website with Microsites & Blog - recommendations

    - by pingu
    Hi guys, I'm in the process of scoping a solution for an events organisation. Their main website features information about them and blog entries etc, but they hold major events which require microsites (domain.com/event). The microsites all have a different look-and-feel, different nav structure, and custom content-managed components. The one thing that's common across everything is the blog - it will have a category for each event under which users can post. The main site will display all blog posts, but the microsites will only display posts for their category. How would you guys implement this? The solution needs to be PHP, and my initial thought was CodeIgniter but if possible I'd like to avoid building the blog functionality - so I guess I could integrate it with EE or Wordpress. If anyone has any other suggestions they would be most appreciated.

    Read the article

  • Which Maven Glassfish plugin to use?

    - by Nick Klauer
    I've been trying to integrate deploying java .war's in Glassfish V3 through Maven. While I have found a few plugins, none of them look to be very active: Maven Glassfish Plugin Eskato's Wordpress Blog on Maven And I got the most information out of Eskato's Blog, it was written March 2008, so I don't know what the state of Glassfish Maven integration is, nor can I find a suitable plugin to work with. With the Maven Glassfish Plugin I have had some success, but it still doesn't work entirely well for all goals it says it supports, which makes some of the commands ineffective. Has anyone else been able to integrate Glassfish V3 and Maven successfully? If so, what resources did you use to get it done?

    Read the article

  • Selecting Element followed by text with Selenium WebDriver

    - by Andrew
    I am using Selenium WebDriver and the Python bindings to automate some monotonous WordPress tasks, and it has been pretty straightforward up until this point. I am trying to select a checkbox, but the only way that I can identify it is by the text following it. Here is the relevant portion of HTML: <li id="product_cat-52"> <label class="selectit"> <input value="52" type="checkbox" name="tax_input[product_cat][]" id="in-product_cat-52"> polishpottery </label> </li> The only information that I have in my script to identify this checkbox is the string "polishpottery". Is there any way to select that checkbox knowing only the text that follows?

    Read the article

  • Simple, centralized user management on a small LAN - NIS or LDAP?

    - by einpoklum
    I'm setting up a small LAN for my team. It will, for all intents and purposes, not be connected to any external networks. I would it to have centralized control of user accounts (at least, I think I'd like that; I'm also considering using puppet, so theoretically I could just push /etc/passwd changes, or something). The number of machines is fixed, but not very small. Mostly they're 'attached' to a single user, but sometimes people work remotely on someone else's box; and there are a couple of servers. I've read this question, but my scenario is much simpler (even simpler than in this question) and I'd like to do something (relatively) quick, with not much hassle, but not a dirty totally-insecure hack. Is NIS relevant for my scenario? If not, what's the most hassle-free way to set up LDAP (or LDAP+Kerberos) to achieve the same? Notes: I have no experience with setting up either NIS or LDAP. We use Debian-flavored Linux distributions, mainly Kubuntu 12.04 (not my choice, but that's the way it is).

    Read the article

  • Making Image On Top?

    - by iMayne
    How do I make an image appear on the top of a page and not showing up in the listing post of my upcoming website: www.xternalit.co.uk? Example: when i type: abcdefg then "more option" then below "more option", id have an image. When the user click on "read more" they will see "abcdefg the an image. I dont want that. I want when they click on "read more" they would see the image first and then "abcdefg". Is this possible with a plugin or tweaking of my template? Cheers! PS: can a mod change the tag from php to wordpress? wont work 4 me.

    Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >