Search Results

Search found 4802 results on 193 pages for 'wordpress hack'.

Page 165/193 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• how many sites IIS 6 can handle

  - by Sarah Nasir

  Is there a limit for creating Sites in IIS. i have searched and some forums have it in discussion which says there is no limit. Someone mentioned that he has created upto 100,000 sites in IIS 6 but i dont know his server specs though. Personally i feel that whatever the limit of IIS, the resources will be run out well before the limit reaches. how do big sites like blogger and wordpress handle a huge number of sites on their server. Questions: 1) Is there an upper limit for IIS 6.0? if yes then what is it 2) What should be a good number of requests IIS should serve for a decent server? (I am not talking about dynamic requests on server or logs.) 3) Is there a way I can do the test run on my cloud to test the capability of my server. what factors should i keep in view. db request, page size, disk read/writes etc ? Response shall be highly appreciated.

  Read the article

• how many sites IIS 6 can handle

  - by Sarah Nasir

  Is there a limit for creating Sites in IIS. i have searched and some forums have it in discussion which says there is no limit. Someone mentioned that he has created upto 100,000 sites in IIS 6 but i dont know his server specs though. Personally i feel that whatever the limit of IIS, the resources will be run out well before the limit reaches. how do big sites like blogger and wordpress handle a huge number of sites on their server. Questions: 1) Is there an upper limit for IIS 6.0? if yes then what is it 2) What should be a good number of requests IIS should serve for a decent server? (I am not talking about dynamic requests on server or logs.) 3) Is there a way I can do the test run on my cloud to test the capability of my server. what factors should i keep in view. db request, page size, disk read/writes etc ? Response shall be highly appreciated.

  Read the article

• I think installing PostFix solved my problem, but it seemed *too* easy

  - by Joel Marcey

  Hi, This is a followup to a serverfault post I made a while ago: http://serverfault.com/questions/21633/how-do-i-target-a-different-mail-server-depending-on-domain-with-exim (More context here too: http://forum.slicehost.com/comments.php?DiscussionID=3806 ) I have a slice/VPS at Slicehost. I basically decided to scrap exim (i.e., purge it), and start anew with my email infrastructure. In case you didn't read any of the above threads, basically my goal was to have a send only mail infrastructure that relays all outgoing email to Google Apps. I also wanted to where email from domain1 (a Wordpress installation) would show it coming from domain1.com and email from domain2 (a normal website) would show it coming from domain2.com. So I decided to give PostFix a try. I literally followed the surprisingly simple instructions here: http://sudhanshuraheja.com/2009/02/slicehost-setup-outgoing-mail-google-apps-postfix/ And voila, all seems to be working as I expected. My email tests show email coming from the proper locations (either domain1 or domain2 depending on where the emails were sent from). But this all seemed too simple to me. So simple, in fact, that I feel that something is amiss. When I installed PostFix according to the instructions in the post above and it worked, I was surprised that I didn't have to specify an SMTP server, a port number, any authentication credentials, etc. My slice is set up such that I have MX records for Google Apps (e.g., ASPMX.L.GOOGLE.COM.) in my DNS settings, but I am not sure if that is why it is working. My email infrastructure knowledge is admittedly limited, but with this am I suspect to: Spammers using my email infrastructure? My emails going to people as spam? Something else sinister? I have actually stopped running PostFix until I understand this better. Thanks!

  Read the article

• Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.?

  - by Asian Angel

  When it comes to computers, Windows definitely rules the desktop in comparison to other operating systems. What we would like to know this week is if you would actually be willing to give up using Windows altogether and move to a different operating system on your computers. Note: This week’s Ask the Readers post is posing a hypothetical situation, so please refrain from starting arguments or a flame war in the comments. Good reasoned discussion is always welcome. There is no doubt that Windows is the dominant operating system in use today. Everywhere you go or look it is easy to find computers with Windows installed such as at work, home, the library, government offices, and more. For many people it is the operating system that they know and are comfortable with, which makes changing to a different operating system less appealing. Adding to the preference for Windows (or dependency based on your view) is the custom software that many businesses use on a daily basis. Throw in the high volume of people who depend on and use Microsoft Office as a standard for their business documents and it is little wonder that Windows is so dominant. So what would you use if you did decide to take a break from or permanently move away from Windows? If your choice is Linux then you have a large and wonderful variety of distributions to choose from based on what you want out of your system. Want a distribution that is easy to work with? You could choose Ubuntu, Linux Mint, or others that are engineered to be ready to go “out of the box”. Like a challenge? Perhaps Arch Linux is more your style. One of the most attractive features of all about Linux is the price…it is very hard to beat free! Maybe Mac OS X sounds like the perfect choice. It has a certain mystique and elegance associated with it and many OS X fans refuse to use anything else if given a choice. Then there is the soon to be released Chrome OS with its’ emphasis on cloud computing. This is a system that is definitely focused on being as low-maintenance and hassle-free as possible. Quick on, quick off, minimalist, and made to be portable. All of the system’s updates will occur automatically leaving you free to work and play in the cloud. But it does have its’ limitations…no installing all of those custom apps that you love using on Windows or other systems…it is literally all about the browsing window and web apps. So there you have it. If the opportunity presented itself would you, could you give Windows up and use a different operating system? Would it be easy or hard for you to do? Perhaps it would not really matter so long as you could do what you needed or wanted to do on a computer. And maybe this is the perfect time to try something new and find out…that new favorite operating system could be just an install disc away. Let us know your thoughts in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

  Read the article

• Backup plan for linux webserver in small business?

  - by radman

  Hi, I am currently in the process of writing a backup plan for the webserver in use by my business. I am very new to this area and have a few ideas about how things should work but am unsure of what tools to use and what sort of restore process is appropriate. I'm looking for something relatively simplistic and it doesn't have to be 100% paranoid just enough to give me a reliable backup. Speed is not of the essence and there is not going to be a live fallback in place. The backup will be onto a single hdd that will be stored onsite (no option for offsite as yet). Backups will be taking place weekly. I am constrained by both time and money which is why I'm aiming for a good enough solution. Is taking an image of the webserver system drive periodically and using that as the backup appropriate? Should I be testing that the backups restore correctly every time that I perform one? This is a bit broad but what setup would you use if you were in my place, given the services I am running? Should I add additonal machines and split the services? Any advice is much appreciated! See below for server details Webserver Platform Linux Ubuntu server Running mail-server svn-server mediawiki wordpress apache-webserver Hardware single 500gb sata drive Architecture Single machine behind router (with firewall) accessible to the internet.

  Read the article

• Permissions nightmare - tried all I know

  - by Ben

  Working on a new client's dev site, which is a wordpress install on a Plesk box. I have SSH root access, and FTP access through a separate account. What I've done so far Initially I couldn't make any changes to any files at all. The permissions on all the template files looked a little screwy (644), so I figured change them to allow group, and add myself to the group: CHMOD Recursive on the theme folder to set everything to 664 Quickly realised I'd broken it, set the folders to 755, kept files as 664 Ownership on all files is a mixture of root:root and 500:500 (there is no user nor group with the ID of 500 on the server). Added myself to the group 'root' so I could modify the files too The Problem This worked OK, in terms of being able to edit the existing files, so I began working. However, I can't upload to the directory, even having run CHOWN -R root:root templatefolder/ and being in the root group. I feel like I must be missing something obvious, and it's doing my head in. Questions: Files in the install owned by 500 with group 500 - I've looked in /etc/group and /etc/passwd and there is no user nor group with this ID. Is that left over from another developer's setup or the previous server (they moved recently)? Is being in the 'root' group enough, or do I need to own the theme folder as 'myftpuser' in order to upload and create new files? Like I say, I have edit access, so I got myself this far. I'm now questioning what to do next!

  Read the article

• Requesting better explanation for expires headers

  - by syn4k

  I have successfully implemented expires headers however, for several days I have been stumped by one thing. This article: http://www.tipsandtricks-hq.com/how-to-add-far-future-expires-headers-to-your-wordpress-site-1533 states Keep in mind that when you use expires header the files are cached in the browser until it expires so do not use this on files that changes frequently. Other sites indicate the same in my reading. But this doesn't seem to be true. I have updated an image, using the same name, several times. Each time I update and refresh my browser, the new image (with the same name) displays. I understand from this article that the old image should display unless I use a new name. Do you happen to know where the misunderstanding is? I have verified that the image in question has expires headers set on it: Request Headers: Host domain.com User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 FirePHP/0.5 Accept image/png,image/*;q=0.8,*/*;q=0.5 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://domain.com/index.php Cookie __utma=1.61479883.1332439113.1332783348.1332796726.4; __utmz=1.1332439113.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none);PHPSESSID=lv2hun9klt2nhrdkdbqt8abug7; __utmb=1.33.10.1332796726; __utmc=1; ck_authorized=true x-insight activate If-Modified-Since Mon, 26 Mar 2012 21:55:33 GMT Cache-Control max-age=0 Response Headers: Date Mon, 26 Mar 2012 22:06:50 GMT Server Apache/2.2.3 (CentOS) Connection close Expires Wed, 25 Apr 2012 22:06:50 GMT Cache-Control max-age=2592000

  Read the article

• Website has become slower on a VPS, was much fast on a shared host. What's wrong?

  - by Arpit Tambi

  My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

  Read the article

• PHP script not automatically updating when moved to another server

  - by user32007

  A friend built a ranking system on his site and I am trying to host in on mine via WordPress and Go Daddy. It updates for him but when I load it to my site, it works for 6 hours, but as soon as the reload is supposed to occur, it errors and I get a 500 timeout error. His page is at: jeremynoeljohnson .com/yakezieclub My page is currently at http://sweatingthebigstuff.com/yakezieclub but when you ?reload=1 it will give the error. Any idea why this might be happening? Any settings that I might need to change? Here is the top of the index.php file. I'm not sure which part of any of it is messing up. I literally uploaded the same code as him. Here's the reload part: $cachefile = "rankings.html"; $daycachefile = "rankings_history.xml"; $cachetime = (60 * 60) * 6; // every 6 hours, the cache refreshes $daycachetime = (60 * 60) * 24; // every 24 hours, the history will be written to // - or whenever the page is requested after 24 hours has passed $writenewdata = false; if (!empty($_GET['reload'])) { if ($_GET['reload']== 1) { $cachetime = 1; } } if (!empty($_GET['reloadhistory'])) { if ($_GET['reloadhistory'] == 1) { $daycachetime = 1; $cachetime = 1; } } if (file_exists($daycachefile) && (time() - $daycachetime < filemtime($daycachefile))) { // Do nothing } else { $writenewdata = true; $cachetime = 1; } // Serve from the cache if it is younger than $cachetime if (file_exists($cachefile) && (time() - $cachetime < filemtime($cachefile))) { include($cachefile); echo "<!-- Cached ".date('jS F Y H:i', filemtime($cachefile))." -->"; exit; } ob_start(); // start the output buffer ?>

  Read the article

• High CPU usage in my digitalocean droplet

  - by Ibrahim Azhar Armar

  I am experiencing high CPU usage here is the stats i got from server, the consumption after every restart in 15 minutes go upto 100%, what could go wrong? I have a wordpress copy installed on the server which does not have much traffic, here is the stats that i got from using top command in server. top - 11:46:02 up 12 min, 3 users, load average: 40.89, 16.03, 6.11 Tasks: 132 total, 41 running, 91 sleeping, 0 stopped, 0 zombie Cpu(s): 24.3%us, 61.5%sy, 0.0%ni, 0.0%id, 4.0%wa, 0.0%hi, 0.0%si, 10.2%st Mem: 2050896k total, 1988656k used, 62240k free, 284k buffers Swap: 0k total, 0k used, 0k free, 4712k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31 root 20 0 0 0 0 R 39 0.0 1:35.53 kswapd0 899 root 20 0 15988 172 0 S 14 0.0 0:05.00 irqbalance 418 syslog 20 0 243m 600 0 S 13 0.0 0:06.85 rsyslogd 944 mysql 20 0 1320m 53m 0 S 12 2.7 0:21.15 mysqld 2357 root 20 0 17344 532 164 R 11 0.0 0:14.27 top 960 root 20 0 246m 3816 0 S 3 0.2 0:08.18 php5-fpm 2431 www-data 20 0 344m 64m 908 R 2 3.2 0:04.23 apache2 2435 www-data 20 0 304m 63m 836 R 2 3.2 0:03.43 apache2 2413 www-data 20 0 349m 63m 920 R 2 3.2 0:07.51 apache2 2465 www-data 20 0 349m 64m 944 R 2 3.2 0:05.04 apache2 2518 www-data 20 0 307m 41m 1204 R 2 2.1 0:01.37 apache2 2406 www-data 20 0 346m 56m 1144 R 2 2.8 0:03.76 apache2 2456 www-data 20 0 345m 55m 1184 R 2 2.8 0:02.67 apache2 2373 www-data 20 0 351m 63m 784 R 2 3.2 0:11.09 apache2 2439 www-data 20 0 306m 35m 916 R 2 1.8 0:02.51 apache2 2450 www-data 20 0 345m 55m 1088 R 2 2.8 0:02.96 apache2 2486 www-data 20 0 299m 10m 876 R 2 0.5 0:01.19 apache2 2523 www-data 20 0 300m 27m 796 R 2 1.4 0:00.99 apache2

  Read the article

• How to clone MySQL DB? Errors with CREATE VIEW/SHOW VIEW privileges

  - by user38071

  Running MySQL 5.0.32 on Debian 4.0 (Etch). I'm trying to clone a WordPress MySQL database completely (structure and data) on the same server. I tried doing a dump to a .sql file and an import into a new empty database from the command line, but the import fails with errors saying the user does not have the "SHOW VIEW" or "CREATE VIEW" privilege. Trying it with PHPMyAdmin doesn't work either. I also tried doing this with the MySQL root user (not named "root" though) and it shows an "Access Denied" error. I'm terribly confused as to where the problem is. Any pointers on cloning a MySQL DB and granting all privileges to a user account would be great (specifically for MySQL 5.0.32). The SHOW GRANTS command for the existing user works (the one who has privileges over the source database). It shows that the user has all privileges granted. I created a new user and database. Here's what I see with the grant commands. $ mysql -A -umyrootaccount --password=myrootaccountpassword mysql> grant all privileges on `newtarget_db`.* to 'newtestuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db' mysql> grant all privileges on `newtarget_db`.* to 'existingsourcedbuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db'

  Read the article

• How to handle sh: fetch: command not found

  - by Tyler Johnson

  Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps

  Read the article

• Revover original email from Sendmail log

  - by Xavi Colomer

  I have a website the contact form has been failing silently for two weeks (Wordpress + Contact form 7). Apparently updating to Contact Form 7 made the assigned email to fail [email protected], I also tested with [email protected] and it also failed until I tried with gmail and it finally worked. Apparently @telefonica.net and @me.com domains are not working with this version of the plugin, but I have to investigate the cause. I found the logs of the lost emails, but I would like to know If I can recover the sender or the content of the original messages. May 24 23:41:11 localhost sendmail[27653]: s4P3fBc3027653: from=www-data, size=3250, class=0, nrcpts=1, msgid=<[email protected]_web.com>, relay=www-data@localhost May 24 23:41:11 localhost sm-mta[27655]: s4P3fBdA027655: from=<[email protected]>, size=3359, class=0, nrcpts=1, msgid=<[email protected]_web.com>, proto=ESMTP, daemon=MTA-v4, relay=localhost.localdomain [127.0.0.1] May 24 23:41:11 localhost sendmail[27653]: s4P3fBc3027653: [email protected], ctladdr=www-data (33/33), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=33250, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s4P3fBdA027655 Message accepted for delivery) May 24 23:41:12 localhost sm-mta[27657]: s4P3fBdA027655: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:00:01, xdelay=00:00:01, mailer=esmtp, pri=123359, relay=tnetmx.telefonica.net. [86.109.99.69], dsn=5.0.0, stat=Service unavailable May 24 23:41:12 localhost sm-mta[27657]: s4P3fBdA027655: s4P3fCdA027657: DSN: Service unavailable May 24 23:41:12 localhost sm-mta[27657]: s4P3fCdA027657: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30000, dsn=2.0.0, stat=Sent Thanks

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• Issues with VSFTPD / FTP on Linux Ubuntu server - Steps for Troubleshooting?

  - by jnolte

  I am dealing with an issue I am unclear on how to resolve and have been pulling my hair out for some time. I have been trying to configure an FTP user using the following (we use this same documentation on all servers) Install FTP Server apt-get install vsftpd Enable local_enable and write_enable to YES and anonymous user to NO in /etc/vsftpd.conf restart - service vsftpd restart - to allow changes to take place Add WordPress User for FTP access in WP Admin Create a fake shell for the user add "usr/sbin/nologin" to the bottom of the /etc/shells file Add a FTP user account useradd username -d /var/www/ -s /usr/sbin/nologin passwd username add these lines to the bottom of /etc/vsftpd.conf - userlist_file=/etc/vsftpd.userlist - userlist_enable=YES - userlist_deny=NO Add username to the list at top of /etc/vsftpd.userlist restart vsftpd "service vsftpd restart" make sure firewall is open for ftp "ufw allow ftp" allow modify the /var/www directory for username "chown -R /var/www I have also went through everything listed on this post and no luck. I am getting connection refused. Sorry for the poor text formatting above. I think you get the idea. This is something we do over and over and for some reason it is not cooperating here. Setup is Ubuntu 12.04LTS and VSFTPD v2.3.5 Thank you in advance.

  Read the article

• 101 Ways to Participate...and make the future Java

  - by heathervc

   In case you missed it earlier today, and as promised in BOF6283, here are the 101 Ways to Improve (and Make the Future) Java...thanks to Bruno Souza of SouJava and Martijn Verburg of the London Java Community for their contributions! Join or create a JUG Come to the meetings Help promoting your JUG: twitter, facebook, etc Find someone that can give a talk Get your company to sponsor (a meeting, an event) Organize an activity (meetings, hackathons, dojos, etc) Answer questions on a mailing list (or simply join!) Volunteer for a small, one time tasks (creating a web page, helping with an activity) Come early to an event, and help to carry the piano Moderate a list or add things to the wiki Participate in the organization meetings or mailing lists Take pictures of an event or meeting and publish them online Write a blog about an event or meeting, to help promote the group Help record and post a session online Present your JavaOne experience when you get back Repeat the best talk you saw at JavaOne at a JUG meeting Send this list of ideas to other Java developers in your area so they can help out too! Present a step-by-step tutorial Present GreenFoot and Alice to school students Present BlueJ and Alice to university students Teach those tools to teachers and professors Write a step-by-step tutorial on your blog or to a magazine Create a page that lists resources Give a talk about your favorite Java feature or technology Learn a new Java API and present to your co-workers Then, present in a JUG meeting, and then, present it in an event in your area, and submit it to JavaOne! Create a study group to get certified or to learn some new Java technology Teach a non-Java developer how to download the basic tools and where to find more information Download and use an open source project Improve the documentation Write an article or a blog post about the project Write an FAQ Join and participate on the mailing list Describe a bug in detail and submit a bug report Fix a bug and submit it to the project Give a talk about it at a JUG meeting Teach your co-workers how to use the project Sign up to Adopt a JSR Test regular builds of the Reference Implementation (RI) Report bugs in the RI Submit Feature Requests to the spec Triage issues on the issue tracker Run a hack day to discuss the API Moderate mailing lists and forums Create an FAQ or Wiki Evangelize a specification on Twitter, G+, Hacker News, etc Give a lightning talk Help build the RI Help build the Technical Compatibility Kit (TCK) Create a Podcast Learn Latin - e.g. legal language, translate to English Sign up to Adopt OpenJDK Run a Bugathon Fix javac compiler warnings Build virtual images Add tests to Java Submit Javadoc patches Give a webbing Teach someone to build OpenJDK Hold a brown bag session at work Fix the oldest known bug Overhaul Javadoc to use HTML Load the OpenJDK into different IDEs Run a build farm node Test your code on a nightly build Learn how to read Java byte code Visit JCP.org Follow jcp_org on Twitter Friend JCP on Facebook Read JCP Blog Register for JCP.org site Create a JSR Watch List Review JSRs in progress Comment on JSRs in progress, write and track bug reports, use cases, etc Review JSRs in Maintenance Comment on JSRs in Maintenance Implement Final JSRs Review the Transparency of JSRs in progress and provide feedback to the PMO and Spec Lead/community Become a JCP Member or associate with a current JCP member Nominate to serve on an Expert Group (EG) Serve on an EG Submit a JSR proposal and become Spec Lead Take a Spec Lead role in an Inactive or Dormant JSR Nominate for an Executive Committee (EC) seat Vote in the EC elections Vote in EC Special Elections Review EC Meeting Summaries Attend Spec Lead calls Write blogs, articles on your experiences Join the EC project on java.net Join JCP.Next on java.net/JSR 358 Participate on the JCP forums and join JSR projects on java.net Suggest agenda items for open EC meetings Attend public EC teleconference (2x per year) Attend open EC meetings at JavaOne Nominate for JCP Annual Awards Attend annual JavaOne and JCP Annual Awards Ceremony Attend JCP related BOF sessions and give your feedback to Program Office Invite JCP program office members to your JUG  or meetup Invite JSR Spec Leads to your JUG or meetup And always - hold a party!

  Read the article

• MySQL Not Turning On

  - by Shalin Shah

  I have an amazon ec2 instance running on the Amazon Linux AMI and its a micro instance. I wanted to install Django onto my server so I entered these commands wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/go wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/django.conf chmod 744 go ./go So after I was done, I ran sudo service httpd restart and sudo service mysqld restart and This is what came up for mysqld: Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] So I deleted the django files /usr/local/python2.6.8/site-packages/django_registration.egg and I tried finding the error and I found out that in my /etc/my.cnf for the socket, it said socket=/var/lock/subsys/mysql.sock so I went to /var/lock/subsys/ and there was no mysql.sock. I tried creating one using vim but it still didn't work. Then I checked the error log and it said Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) So I am pretty much lost right now. I know it has something to do with mysql.sock If you might know a reason why this was caused could you please let me know? I have a wordpress site on my server, so i kind of need MySQL to work. Thanks!

  Read the article

• Is it bad practice to make an iterator that is aware of its own end

  - by aaronman

  For some background of why I am asking this question here is an example. In python the method chain chains an arbitrary number of ranges together and makes them into one without making copies. Here is a link in case you don't understand it. I decided I would implement chain in c++ using variadic templates. As far as I can tell the only way to make an iterator for chain that will successfully go to the next container is for each iterator to to know about the end of the container (I thought of a sort of hack in where when != is called against the end it will know to go to the next container, but the first way seemed easier and safer and more versatile). My question is if there is anything inherently wrong with an iterator knowing about its own end, my code is in c++ but this can be language agnostic since many languages have iterators. #ifndef CHAIN_HPP #define CHAIN_HPP #include "iterator_range.hpp" namespace iter { template <typename ... Containers> struct chain_iter; template <typename Container> struct chain_iter<Container> { private: using Iterator = decltype(((Container*)nullptr)->begin()); Iterator begin; const Iterator end;//never really used but kept it for consistency public: chain_iter(Container & container, bool is_end=false) : begin(container.begin()),end(container.end()) { if(is_end) begin = container.end(); } chain_iter & operator++() { ++begin; return *this; } auto operator*()->decltype(*begin) { return *begin; } bool operator!=(const chain_iter & rhs) const{ return this->begin != rhs.begin; } }; template <typename Container, typename ... Containers> struct chain_iter<Container,Containers...> { private: using Iterator = decltype(((Container*)nullptr)->begin()); Iterator begin; const Iterator end; bool end_reached = false; chain_iter<Containers...> next_iter; public: chain_iter(Container & container, Containers& ... rest, bool is_end=false) : begin(container.begin()), end(container.end()), next_iter(rest...,is_end) { if(is_end) begin = container.end(); } chain_iter & operator++() { if (begin == end) { ++next_iter; } else { ++begin; } return *this; } auto operator*()->decltype(*begin) { if (begin == end) { return *next_iter; } else { return *begin; } } bool operator !=(const chain_iter & rhs) const { if (begin == end) { return this->next_iter != rhs.next_iter; } else return this->begin != rhs.begin; } }; template <typename ... Containers> iterator_range<chain_iter<Containers...>> chain(Containers& ... containers) { auto begin = chain_iter<Containers...>(containers...); auto end = chain_iter<Containers...>(containers...,true); return iterator_range<chain_iter<Containers...>>(begin,end); } } #endif //CHAIN_HPP

  Read the article

• SSH attack CentOS Amazon EC2

  - by user37143

  Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

  Read the article

• Apache directory authorization bug (clicking cancel gives acces to partial content)

  - by s4uadmin

  I got a minor problem (as the site is not high priority) but still a very interesting one. I have an apache root domain wherein other sites live "/var/www/" And I have foo.example.com forwarding to "/var/www/foo-example" (wordpress site) The problem here is that when you go to foo.example.com you are prompted to enter credentials. If you hit cancel it gives you the access denied page. But when you go to the servers' direct IP (this gives you the default index page) and hit cancel when prompted for credentials it just keeps giving you the login screen, and after pressing cancel a few times more it gives (a perhaps cached) bare html part of the page. How do I prevent this from happening? Perhaps this is a bug... Even if I would block access to the root directory when going to the ip/foo-example it would still do this. And I want to keep all the directories within the www directory or at least all in the same. Thanks PS: here is my configuration: <VirtualHost *:80> DocumentRoot /var/www/wp-xxxxxxx/ ServerName beta.xxxxxxxxx.nl <Directory "/var/www/wp-xxxxxxxxx/"> Options +Indexes AuthName "xxxxxxxx Beta Site" AuthType Basic require valid-user Satisfy all AuthBasicProvider file AuthUserFile /var/www/wp-xxxxxxx/.htxxxxxxxxx order deny,allow allow from all </Directory> ServerAdmin [email protected] ServerAlias beta.xxxxxxx.nl </VirtualHost>

  Read the article

• Type of computer for a developer on the road

  - by nabucosound

  Hi developers: I am planning to be traveling through eurasia and asia (russia, china, korea, japan, south east asia...) for a while and, although there are plenty of marvelous things to see and to do, I must keep on working :(. I am a python developer, dedicated mainly to web projects. I use django, sqlite3, browsers, and ocassionaly (only if I have no choice) I install postgres, mysql, apache or any other servers commonly used in the internets. I do my coding on vim, use ssh to connect, lftp to transfer files, IRC, grep/ack... So I spend most of my time in the terminal shells. But I also use IM or Skype to communicate with my clients and peers, as well as some other software (that after all is not mandatory for my day-to-day work). I currently work with a Macbook Pro (3 years old now) and so far I am very happy with the performance. But I don't want to carry it if I am going to be "on transit" for long time, it is simply huge and heavy for what I am planning to load in my rather small backpack (while traveling, less is more, you know). So here I am reading all kind of opinions about netbooks, because at first sight this is the kind of computer I thought I had to choose. I am going to use Linux for it, Microsoft is not my cup of tea and Mac is not available for them, unless I were to buy a Macbook air, something that I won't do because if I am robbed or rain/dust/truck loaders break it I would burst in tears. I am concerned about wifi performance and connectivity, I am going to use one of those linux distros/tools to hack/test on "open" networks (if you know what I mean) in case I am not in a place with real free wifi access and I find myself in an emergency. CPU speed should be acceptable, but since I don't plan to run Photoshop or expensive IDEs, I guess most of the time I won't be overloading the machine. Apart from this, maybe (surely) I am missing other features to consider. With that said (sorry about the length) here it comes my question, raised from a deep ignorance regarding the wars betweeb betbooks vs notebooks (I assume tablet PCs are not for programming yet): If I buy a netbook will I have to throw it away after 1 month on the road and buy a notebook? Or will I be OK? Thanks! Hector Update I have received great feedback so far! I would like to insist on the fact that I will be traveling through many different countries and scenarios. I am sure that while in Japan I will be more than fine with anything related to technology, connectivity, etc. But consider that I will be, for example, on a train through Russia (transsiberian) and will cross Mongolia as well. I will stay in friends' places sometimes, but most of the time I will have to work from hostel rooms, trains, buses, beaches (hey this last one doesn't sound too bad hehe!). I think some of your answers guys seem to focus on the geek part but loose the point of this "on the road" fact. I am very aware and agree that netbooks suck compared to notebooks, but what I am trying to do here is to find a balance and discover your experiences with netbooks to see first hand if a netbook will be a fail in the mid-long term of the trip for my purposes. So I have resumed the main concepts expressed here on this small list, in no particular order: keyboard/touchpad feel: I use vim so no need of moving mouse pointers that much, unless I am browsing the web, but intensive use of keyboard screen real state: again, terminal work for most of the time battery life: I think something very important weight/size: also very important looks not worth stealing it, don't give a shit if it is lost/stolen/broken: this may depend on kind of person, your economy, etc. Also to prevent losing work, I will upload EVERYTHING to the cloud whenever I'll have a chance. wifi: don't want to discover my wifi is one of those that cannot deal with half the routers on this planet or has poor connectivity. Thanks again for your answers and comments!

  Read the article

• Forward secrecy in Nginx (CentOS6)

  - by Anil

  I am trying to enable Forward secrecy in CentOS with nginx webserver. What I have tried I have read some tutorials and seems like we should have nginx, openssl latest versions to enable it. So I had installed the openssl latest from source. sudo wget http://www.openssl.org/source/openssl-1.0.1e.tar.gz sudo tar -xvzf openssl-1.0.1e.tar.gz cd openssl-1.0.1e sudo ./config --prefix=/usr/local sudo make sudo make install Now OpenSSL supports the Eliptic Curve ciphers(ECDHE). I tested this with openssl s_server also. It worked well. Next, I replaced Nginx with latest. sudo wget http://nginx.org/packages/centos/6/x86_64/RPMS/nginx-1.4.2-1.el6.ngx.x86_64.rpm sudo rpm -e nginx sudo rpm -ivh nginx-1.4.2-1.el6.ngx.x86_64.rpm and configured Nginx as described in this link ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_prefer_server_ciphers on; ssl_ciphers EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA256:EECDH+aRSA+RC4:EDH+aRSA:EECDH:RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS; http://baudehlo.wordpress.com/2013/06/24/setting-up-perfect-forward-secrecy-for-nginx-or-stud/ But now Nginx does not support ECDHE ciphers. It supports DHE ciphers. I tried by just enabling ECDHE cipher in nginx still doesn't work. I am using latest web browser(chrome 29 and it support this cipher) Am i missing anything ? Or Having issues with CentOS or Nginx? I read somewhere that ECC patent issues with CentOS, is this causing problem?

  Read the article

• Struggling with proper way to setup Permissions on Linux/Apache Web Server

  - by Dr. DOT

  Your expert experience and assistance is great, greatly appreciated here. I have been running a LAMP server for a long time, yet I still struggle with the best way to set file & directory permissions for FTP and WWW protocol activity. My Control panel is WHM/cPanel (not that it makes a difference), and out-of-the box: files are owned by the user account setup in WHM (eg, "abc") files have a group setting of "abc" as well file permissions are created with 644 directories are owned by "abc" directories have a group setting of "abc" directories permissions are created with 0755 Again, these are the default permission settings. Now everything is fine with FTP activity, but please advise me if any of these file/directory settings create issues, especially with security. Here's where my struggle comes into play. I have PHP apps that allow a visitor to create, edit, rename, delete, etc. sub-directories and files in certain selected directories. PHP runs as "nobody" on my server. So in order to get my PHP/Web apps to work, I have had to: chown nobody * chgrp nobody * chmod 0777 * to everything in these certain & selected sub-directories. I know this is probably a huge security whole (so don't ask me for any links :) but how should I set all the permissions to allow my FTP user to do his thing while allowing the PHP apps to do their thing will also "minimizing" any security risks and exposures? I know that big CMS systems like Drupal, Joomla, WordPress and so on, handle this. Thanks ahead of time for reading through this and offering your expert advice!

  Read the article

• mod_rpaf problems with Nginx front, Apache back-end after Ubuntu upgrade

  - by Kenn

  I'm running an Nginx front-end for static files, and proxying to an Apache backend for PHP and Passenger, using Apache's mod_rpaf to set the correct remote IP address on the backend. Everything worked fine until I upgraded to Ubuntu 12.04 (Precise). Now Apache reports all connections coming from 127.0.0.1. Here's the relevant configuration. Nothing here changed with the upgrade. Nginx: proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; mod_rpaf: <IfModule mod_rpaf.c> RPAFenable On RPAFsethostname On RPAFproxy_ips 127.0.0.1 ::1 RPAFheader X-Forwarded-For </IfModule> I'm using %{X-Forwarded-For}i in my Apache LogFormat directive and the access logs are showing the correct remote address, so I know Nginx is passing the address along properly. In a phpinfo() test, HTTP_X_FORWARDED_FOR is showing the correct remote address, but REMOTE_ADDR is 127.0.0.1. This is reflected in PHP applications as well, such as WordPress comments. I've tried switching Nginx and mod_rpaf to X-Real-IP with no effect. Did something change that I missed? Relevant version info, everything installed from the Ubuntu repository: Nginx 1.1.19 Apache 2.2.22 mod_rpaf 0.6

  Read the article

• How to effectively have less php-cgi processes running?

  - by João Pinto Jerónimo

  My server is a Linode 512, and on it I run a Wordpress MU with 3 websites (they don't get a lot of visitors) and a couple of NodeJS apps. I need to switch to Lighttpd because Apache 2 was using about 59% of the server's RAM, and now I have the php-cgi processes taking up about 43.6% of the server's RAM: most often 2 processes use 16.5% of the RAM each, 4 processes use 1.8% of the RAM each, and 4 more processes use 0,8% of the RAM, each How can I have less of these processes ? I'm almost sure they're not all needed for the trafic this server gets... I tried only allowing 2 children, but I still have those 10... This is my fastcgi.server section in lighttpd.conf. fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/var/run/lighttpd/php-fastcgi.socket", "bin-path" => "/usr/bin/php-cgi", "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "4000" ) ) ) ) What else can I do to tune lighttpd to use less RAM ?

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >