Search Results

Search found 73679 results on 2948 pages for 'get http client info'.

Page 16/2948 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• HTTP SSL VPN Client? (alternative to Cisco's AnyConnect VPN)

  - by Ian Boyd

  Is there any free HTTP SSL VPN clients around, one that can act as an alternative to Cisco's own HTTP SSL VPN client (called AnyConnect)? The Cisco AnyConnect client has acknowledged problems, with no forthcoming solutions. Which is why I'm hoping for an alternative. Note: I'm only talking about the HTTP SSL VPN Client, not the HTTP SSL VPN Server. (If it were up to me they wouldn't be using Cisco at all, but it's not up to me.) Note: OpenVPN is a client that talks to their servers once you sign up for their service. It's not a generic VPN client. Note: ShrewSoft VPN is a client that uses IPsec and pre-shared keys, and was a good replacement for Cisco's old client - but not the new AnyConnect SSL VPN client. Note: Windows 7's VPN client fails to negotiate when presented with an SSL VPN connection. Note: I am looking for Windows clients only.

  Read the article

• VPN still working after rebooting without client - DrayTek client shows "No Connection"

  - by HeavenCore

  My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have the DrayTek VPN client, and a company i do some work for has a DrayTek Vigor router. The VPN client establishes a VPN to that remote company using an IPSec Tunnel (PreShared Key - no encryption) Last night i shut down my pc with the VPN tunnel still connected, when i turned my computer on this morning i accidentally clicked an RDP shortcut to 192.168.1.2 (a host in the remote company) and to my amazement it connected?!? I checked and the DrayTek VPN client isnt running, and when i did run it, it clearly shows "Status: No connection". confused as to how my machine can still talk to this remote machine i tried a trace: C:\Users\HeavenCore>tracert 192.168.1.2 Tracing route to C4SERVERII [192.168.1.2] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 15 ms 21 ms 32 ms C4SERVERII [192.168.1.2] Trace complete. No indication there as to how it's getting from my network to the remote host. with my network mask being 255.255.255.0 with ip 192.168.0.1 i dont even see how packets are routing to 192.168.1.1 - unless there was a static route in place, so i checked the route table: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.82 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.82 266 192.168.0.82 255.255.255.255 On-link 192.168.0.82 266 192.168.0.255 255.255.255.255 On-link 192.168.0.82 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.82 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.82 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.1 Default =========================================================================== As far as i can see, nothing indicating how my packets are getting to 192.168.1.2??? To confirm i was on a different subnet i did an ipconfig /all: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether net Controller Physical Address. . . . . . . . . : 00-23-54-F3-4E-BA DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.82(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Yet straight after confirming my ip and subnet as above i can go ahead and ping the remote machine: C:\Users\HeavenCore>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=48ms TTL=127 Reply from 192.168.1.2: bytes=32 time=23ms TTL=127 Reply from 192.168.1.2: bytes=32 time=103ms TTL=127 Reply from 192.168.1.2: bytes=32 time=25ms TTL=127 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 23ms, Maximum = 103ms, Average = 49ms Also, note on the ping how the times are 35ms ish, this clearly shows the pings are to the remote host and not something on my local lan (all stuff on my local lan pings in 0ms) - plus i verified the host was actually the host via RDP. My Question: Can an IPSec tunnel stay up some how after a reboot without use of the VPN client? (well, i can clearly see that it can) - where in windows is there visibility of this? how does my machine know where to route the packets? I appreciate any insights & thoughts!

  Read the article

• User http does not have write permissions directory?

  - by dwieeb

  I have a bit of an odd set up, I think. I have groups for each domain my server hosts, and I add the user http to each domain group along with the users that should have access to the groups' domains. In my php script running from a directory 'public_html', I try creating a file: <?php $output = ""; print exec('touch test 2>&1', $output); But I get touch: cannot touch `test': Permission denied and the file is not created. But here, clearly stated, the group has all permissions on the directory: drwxrwxr-x 5 dwieeb example.com 1024 Feb 4 05:19 public_html And here are the permissions on the php file in public_html that is trying to use the exec function: -rw-rw-r-- 1 dwieeb example.com 59 Feb 4 05:19 test.php How is this possible if http is part of the example.com group (as seen from a cat on /etc/group) and the directory has full permissions for the group? ... example.com:x:1000:dwieeb,http I'm stumped. EDIT (since apparently I'm not cool enough to answer my own questions yet): Ah, I found the problem. Yes, I restarted Nginx, but the php-fpm daemon must be restarted as well when http is added to the group for my domain. On Arch Linux: rc.d restart php-fpm

  Read the article

• Administering Team Foundation Server 2010 Class resource links

  - by John Alexander

  Here are the resource links for the Administering Team Foundation Server 2010 Class from last week in Minneapolis.  Microsoft® Visual Studio® 2010 and Team Foundation Server® 2010 RTM virtual machine for Microsoft® Virtual PC 2007 SP1 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5e13b15a-fd74-4cd7-b53e-bdf9456855bd Microsoft® Visual Studio® 2010 and Team Foundation Server® 2010 RTM virtual machine for Windows Virtual PC http://www.microsoft.com/downloads/en/details.aspx?FamilyID=509c3ba1-4efc-42b5-b6d8-0232b2cbb26e Microsoft® Visual Studio® 2010 and Team Foundation Server® 2010 RTM virtual machine for Windows Server 2008 Hyper-V http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e0198b64-4acb-4709-b07f-359fb4d523bc Customizable process guidance http://blogs.msdn.com/b/allclark/archive/2010/08/12/customizable-process-guidance.aspx The 5 most read Visual Studio ALM help topics on MSDN http://blogs.msdn.com/b/allclark/archive/2010/11/12/the-5-most-read-visual-studio-alm-help-topics-on-msdn.aspx Inside TFS http://visualstudiomagazine.com/Articles/List/Inside-TFS.aspx Testing Topics http://msdn.microsoft.com/en-us/library/dd286594.aspx Blogs http://community.accentient.com http://geekswithblogs.net Branching Guide http://tfsbranchingguideiii.codeplex.com/ Great VSTS blog http://geekswithblogs.net/hinshelm/Default.aspx My Blog :D http://geekswithblogs.net/jalexander/Default.aspx Visual Studio Forums http://bit.ly/fE16u3 TFS Migration and Integration Solutions http://bit.ly/cLaBnT TFS Migration and Integration Tools (VS ALM Rangers) http://bit.ly/9tHWdG TFS Migration and Integration Platform (CodePlex) http://tfsintegration.codeplex.com Team Foundation Server SDK http://code.msdn.microsoft.com/TfsSdk Migrate and Integration Forum http://bit.ly/f4Lnps Team Foundation Server Widgets http://www.tfswidgets.com TFS Sdk http://code.msdn.microsoft.com/TfsSdk TFS Migration and Integration Solutions http://bit.ly/cLaBnT TFS Integration Tools Forum http://bit.ly/f4Lnps TFS Integration Tools http://bit.ly/9tHWdG TFS Integration Platform http://tfsintegration.codeplex.com VS Upgrade Guide http://vs2010upgradeguide.codeplex.com Updating an Upgraded Team Project to Access New Features http://bit.ly/9cCcMP Team Foundation Power Tools http://bit.ly/dfNVQk Team Foundation Administration Tool http://tfsadmin.codeplex.com Using Team Foundation Server Command-Line Tools http://bit.ly/hCyozJ Changing Groups and Permissions with TFSSecurity http://bit.ly/esIjgw Unofficial Prep guide for TFS 2010 Administration Exam (70-512) http://geekswithblogs.net/enriquelima/archive/2010/07/21/unofficial-prep-guide-for-tfs-2010-administration-exam-70-512.aspx Another Prep Guide http://bit.ly/bpO30R Professional Application Lifecycle Management with VS 2010 Book http://bit.ly/9rCIRj Search CodePlex for TFS related apps http://www.codeplex.com/site/search Visual Studio Gallery http://visualstudiogallery.com TFS Widgets http://tfswidgets.com Migrate from Visual SourceSafe http://bit.ly/8XPSRh Team Foundation Server MSSCCI Provider 2010 http://bit.ly/dst1OQ Attrice TFS Sidekicks www.attrice.info/cm/tfs Hosted TFS http://bit.ly/cMZdvp Manually Processing the Team Foundation Server 2010 Data Warehouse and Analysis Services Database http://bit.ly/aG5oEh TFS 2005, 2008 and 2010 Compatibility http://shrinkster.com/1dhj

  Read the article

• Django Deploy trouble

  - by i-Malignus

  Well, i've walking around this for a couples of days now... I think is time to ask for some help, i think my installation is ok... Server OS: Centos 5 Python -v 2.6.5 Django -v (1, 1, 1, 'final', 0) my apache conf: <VirtualHost *:80> DocumentRoot /opt/workshop ServerName taller.antell.com.py WSGIScriptAlias / /opt/workshop/workshop.wsgi WSGIDaemonProcess taller.antell.com.py user=ignacio group=ignacio processes=2 threads=25 ErrorLog /opt/workshop/apache.error.log CustomLog /opt/workshop/apache.custom.log combined <Directory "/opt/workshop"> Options +ExecCGI +FollowSymLinks -Indexes -MultiViews AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> my mod_wsgi conf: import os import sys sys.path.append('/opt/workshop') os.environ['DJANGO_SETTINGS_MODULE'] = 'workshop.settings' os.environ['PYTHON_EGG_CACHE'] = '/tmp/.python-eggs' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler( ) the error that i'm getting on my apache error log is: [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] mod_wsgi (pid=11459): Exception occurred processing WSGI script '/opt/workshop/workshop.wsgi'. [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] Traceback (most recent call last): [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/wsgi.py", line 241, in __call__ [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] response = self.get_response(request) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/base.py", line 134, in get_response [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.handle_uncaught_exception(request, resolver, exc_info) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/base.py", line 154, in handle_uncaught_exception [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return debug.technical_500_response(request, *exc_info) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/views/debug.py", line 40, in technical_500_response [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] html = reporter.get_traceback_html() [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/views/debug.py", line 114, in get_traceback_html [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return t.render(c) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/__init__.py", line 178, in render [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.nodelist.render(context) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/__init__.py", line 779, in render [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] bits.append(self.render_node(node, context)) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/debug.py", line 81, in render_node [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] raise wrapped [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] TemplateSyntaxError: Caught an exception while rendering: No module named vehicles [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] Original Traceback (most recent call last): [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/debug.py", line 71, in render_node [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] result = node.render(context) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/debug.py", line 87, in render [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] output = force_unicode(self.filter_expression.resolve(context)) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/__init__.py", line 572, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] new_obj = func(obj, *arg_vals) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/defaultfilters.py", line 687, in date [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return format(value, arg) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 269, in format [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return df.format(format_string) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 30, in format [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] pieces.append(force_unicode(getattr(self, piece)())) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 175, in r [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.format('D, j M Y H:i:s O') [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 30, in format [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] pieces.append(force_unicode(getattr(self, piece)())) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/encoding.py", line 71, in force_unicode [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] s = unicode(s) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/functional.py", line 201, in __unicode_cast [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.__func(*self.__args, **self.__kw) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/__init__.py", line 62, in ugettext [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return real_ugettext(message) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 286, in ugettext [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return do_translate(message, 'ugettext') [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 276, in do_translate [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] _default = translation(settings.LANGUAGE_CODE) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 194, in translation [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] default_translation = _fetch(settings.LANGUAGE_CODE) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 180, in _fetch [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] app = import_module(appname) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/importlib.py", line 35, in import_module [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] __import__(name) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] ImportError: No module named vehicles [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] mod_wsgi (pid=11463): Exception occurred processing WSGI script '/opt/workshop/workshop.wsgi'. [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] Traceback (most recent call last): [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/wsgi.py", line 241, in __call__ [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] response = self.get_response(request) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/base.py", line 73, in get_response [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] response = middleware_method(request) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/middleware/common.py", line 56, in process_request [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] if (not _is_valid_path(request.path_info) and [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/middleware/common.py", line 142, in _is_valid_path [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] urlresolvers.resolve(path) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 303, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return get_resolver(urlconf).resolve(path) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 218, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] sub_match = pattern.resolve(new_path) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 216, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] for pattern in self.url_patterns: [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 245, in _get_url_patterns [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] patterns = getattr(self.urlconf_module, "urlpatterns", self.urlconf_module) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 240, in _get_urlconf_module [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] self._urlconf_module = import_module(self.urlconf_name) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/importlib.py", line 35, in import_module [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] __import__(name) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] ImportError: No module named vehicles.urls Please give my a hand, i stuck... Obviously is a problem with my vehicle module (the only one in the app), another thing is that when i try: [root@localhost workshop]# python manage.py runserver 0:8000 The app runs perfectly, i think that the problem is something near the wsgi conf, something is not clicking.... Tks... Update: workshop dir looks like... [root@localhost workshop]# ls -l total 504 -rw-r--r-- 1 root root 22706 Apr 21 15:17 apache.custom.log -rw-r--r-- 1 root root 408141 Apr 21 15:17 apache.error.log -rw-r--r-- 1 root root 0 Apr 17 10:56 __init__.py -rw-r--r-- 1 root root 124 Apr 21 11:09 __init__.pyc -rw-r--r-- 1 root root 542 Apr 17 10:56 manage.py -rw-r--r-- 1 root root 3326 Apr 17 10:56 settings.py -rw-r--r-- 1 root root 2522 Apr 21 11:09 settings.pyc drw-r--r-- 4 root root 4096 Apr 17 10:56 templates -rw-r--r-- 1 root root 381 Apr 21 13:42 urls.py -rw-r--r-- 1 root root 398 Apr 21 13:00 urls.pyc drw-r--r-- 2 root root 4096 Apr 21 13:44 vehicles -rw-r--r-- 1 root root 38912 Apr 17 10:56 workshop.db -rw-r--r-- 1 root root 263 Apr 21 15:30 workshop.wsgi vehicles dir [root@localhost vehicles]# ls -l total 52 -rw-r--r-- 1 root root 390 Apr 17 10:56 admin.py -rw-r--r-- 1 root root 967 Apr 21 13:00 admin.pyc -rw-r--r-- 1 root root 732 Apr 17 10:56 forms.py -rw-r--r-- 1 root root 2086 Apr 21 13:00 forms.pyc -rw-r--r-- 1 root root 0 Apr 17 10:56 __init__.py -rw-r--r-- 1 root root 133 Apr 21 11:36 __init__.pyc -rw-r--r-- 1 root root 936 Apr 17 10:56 models.py -rw-r--r-- 1 root root 1827 Apr 21 11:36 models.pyc -rw-r--r-- 1 root root 514 Apr 17 10:56 tests.py -rw-r--r-- 1 root root 989 Apr 21 13:44 tests.pyc -rw-r--r-- 1 root root 1035 Apr 17 10:56 urls.py -rw-r--r-- 1 root root 1935 Apr 21 13:00 urls.pyc -rw-r--r-- 1 root root 3164 Apr 17 10:56 views.py -rw-r--r-- 1 root root 4081 Apr 21 13:00 views.pyc Update 2: this is my settings.py # Django settings for workshop project. DEBUG = True TEMPLATE_DEBUG = DEBUG ADMINS = ( ('Ignacio Rojas', '[email protected]'), ('Fabian Biedermann', '[email protected]'), ) MANAGERS = ADMINS DATABASE_ENGINE = 'sqlite3' DATABASE_NAME = '/opt/workshop/workshop.db' DATABASE_USER = '' DATABASE_PASSWORD = '' DATABASE_HOST = '' DATABASE_PORT = '' # Local time zone for this installation. Choices can be found here: # http://en.wikipedia.org/wiki/List_of_tz_zones_by_name # although not all choices may be available on all operating systems. # If running in a Windows environment this must be set to the same as your # system time zone. TIME_ZONE = 'America/Asuncion' # Language code for this installation. All choices can be found here: # http://www.i18nguy.com/unicode/language-identifiers.html LANGUAGE_CODE = 'es-py' SITE_ID = 1 # If you set this to False, Django will make some optimizations so as not # to load the internationalization machinery. USE_I18N = True # Absolute path to the directory that holds media. # Example: "/home/media/media.lawrence.com/" MEDIA_ROOT = '' # URL that handles the media served from MEDIA_ROOT. Make sure to use a # trailing slash if there is a path component (optional in other cases). # Examples: "http://media.lawrence.com", "http://example.com/media/" MEDIA_URL = '' # URL prefix for admin media -- CSS, JavaScript and images. Make sure to use a # trailing slash. # Examples: "http://foo.com/media/", "/media/". ADMIN_MEDIA_PREFIX = '/media/' # Make this unique, and don't share it with anybody. SECRET_KEY = '11y0_jb=+b4^nq@2-fo#g$-ihk5*v&d5-8hg_y0i@*9$w8jalp' MIDDLEWARE_CLASSES = ( 'django.middleware.common.CommonMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', ) ROOT_URLCONF = 'workshop.urls' TEMPLATE_DIRS = ( # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates". # Always use forward slashes, even on Windows. # Don't forget to use absolute paths, not relative paths. "/opt/workshop/templates" ) INSTALLED_APPS = ( 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'workshop.vehicles', ) TEMPLATE_CONTEXT_PROCESSORS = ( 'django.core.context_processors.auth', 'django.core.context_processors.debug', 'django.core.context_processors.i18n', 'django.core.context_processors.media', )

  Read the article

• Problem simulating HTTP POST using HttpClient

  - by user560904

  I am trying to programatically send a HTTP Post request using HttpClient to http://ojp.nationalrail.co.uk/en/s/planjourney/query but it is not liking the request I send it. I copied the headers and body from what Chrome browser sends so it is identical but it doesn't like what I send as the HTML mentions there's an error. <div class="padding"> <h1 class="sifr"><strong>Sorry</strong>, something went wrong</h1> <div class="error-message"> <div class="error-message-padding"> <h2>There is a problem with the page you are trying to access.</h2> <p>It is possible that it was either moved, it doesn't exist or we are experiencing some technical difficulties.</p> <p>We are sorry for the inconvenience.</p> </div> </div> </div> Here is my Java program which uses HttpClient: package com.tixsnif; import org.apache.http.*; import org.apache.http.client.HttpClient; import org.apache.http.client.entity.UrlEncodedFormEntity; import org.apache.http.client.methods.HttpPost; import org.apache.http.impl.client.DefaultHttpClient; import org.apache.http.message.BasicNameValuePair; import org.apache.http.protocol.HTTP; import java.io.*; import java.util.*; import java.util.zip.GZIPInputStream; public class WebScrapingTesting { public static void main(String[] args) throws Exception { String target = "http://ojp.nationalrail.co.uk/en/s/planjourney/query"; HttpClient client = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(target); BasicNameValuePair[] params = { new BasicNameValuePair("jpState", "single"), new BasicNameValuePair("commandName", "journeyPlannerCommand"), new BasicNameValuePair("from.searchTerm", "Basingstoke"), new BasicNameValuePair("to.searchTerm", "Reading"), new BasicNameValuePair("timeOfOutwardJourney.arrivalOrDeparture", "DEPART"), new BasicNameValuePair("timeOfOutwardJourney.monthDay", "Today"), new BasicNameValuePair("timeOfOutwardJourney.hour", "10"), new BasicNameValuePair("timeOfOutwardJourney.minute", "15"), new BasicNameValuePair("timeOfReturnJourney.arrivalOrDeparture", "DEPART"), new BasicNameValuePair("timeOfReturnJourney.monthDay", "Today"), new BasicNameValuePair("timeOfReturnJourney.hour", "18"), new BasicNameValuePair("timeOfReturnJourney.minute", "15"), new BasicNameValuePair("_includeOvertakenTrains", "on"), new BasicNameValuePair("viaMode", "VIA"), new BasicNameValuePair("via.searchTerm", "Station name / code"), new BasicNameValuePair("offSetOption", "0"), new BasicNameValuePair("_reduceTransfers", "on"), new BasicNameValuePair("operatorMode", "SHOW"), new BasicNameValuePair("operator.code", ""), new BasicNameValuePair("_lookForSleeper", "on"), new BasicNameValuePair("_directTrains", "on")}; httpPost.setHeader("Host", "ojp.nationalrail.co.uk"); httpPost.setHeader("User-Agent", "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en-US) AppleWebKit/534.10 (KHTML, like Gecko) Chrome/8.0.552.231 Safari/534.10"); httpPost.setHeader("Accept-Encoding", "gzip,deflate,sdch"); httpPost.setHeader("Accept", "text/html,application/xhtml+xml,application/xml;q=0.9,**/*//*;q=0.8"); httpPost.setHeader("Accept-Language", "en-us,en;q=0.8"); httpPost.setHeader("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); httpPost.setHeader("Origin", "http://www.nationalrail.co.uk/"); httpPost.setHeader("Referer", "http://www.nationalrail.co.uk/"); httpPost.setHeader("Content-Type", "application/x-www-form-urlencoded"); httpPost.setHeader("Cookie", "JSESSIONID=B2A3419B79C5D999CA4806B459675CCD.app201; Path=/"); UrlEncodedFormEntity urlEncodedFormEntity = new UrlEncodedFormEntity(Arrays.asList(params)); urlEncodedFormEntity.setContentEncoding(HTTP.UTF_8); httpPost.setEntity(urlEncodedFormEntity); HttpResponse response = client.execute(httpPost); InputStream input = response.getEntity().getContent(); GZIPInputStream gzip = new GZIPInputStream(input); InputStreamReader isr = new InputStreamReader(gzip); BufferedReader br = new BufferedReader(isr); String line = null; while((line = br.readLine()) != null) { System.out.printf("\n%s", line); } client.getConnectionManager().shutdown(); } } I keep the JSESSION ID updated if it expires but there seems to be another problem that I cannot see. Am I missing something rather obvious? He

  Read the article

• How do I process multipart http responses in Ruby Net:HTTP?

  - by seal-7

  There is so much information out there on how to generate multipart responses or do multipart file uploads. I can't seem to find any information on how to process a multipart http response. Here is some IRB output from a multipart http response I am working with. >> response.http.content_type => "multipart/related" >> response.http.body[0..2048] => "\r\n------=_Part_3_806633756.1271797659309\r\nContent-Type: text/xml; charset=UTF-8\r\nContent-Transfer-Encoding: binary\r\nContent-Id: <A0FCC4333C6D0FCA346B97FAB6B61818>\r\n\r\n<?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><ns1:runReportResponse soapenv:encodingStyle="http://www.w3.org/2003/05/soap-encoding" xmlns:ns1="http://192.168.1.200:8080/jasperserver/services/repository"><ns2:result xmlns:ns2="http://www.w3.org/2003/05/soap-rpc">runReportReturn</ns2:result><runReportReturn xsi:type="xsd:string">&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt;\n&lt;operationResult version=&quot;2.0.1&quot;&gt;\n\t&lt;returnCode&gt;&lt;![CDATA[0]]&gt;&lt;/returnCode&gt;\n&lt;/operationResult&gt;\n</runReportReturn></ns1:runReportResponse></soapenv:Body></soapenv:Envelope>\r\n------=_Part_3_806633756.1271797659309\r\nContent-Type: application/pdf\r\nContent-Transfer-Encoding: binary\r\nContent-Id: <report>\r\n\r\n%PDF-1.4\n%\342\343\317\323\n3 0 obj

  Read the article

• Does the `Expires` HTTP header needs to be consistent across multiple cold-cache requests?

  - by chakrit

  I'm implementing a custom web server of a kind. And am looking into adding an Expires header support. However, I'm a little unsure of how exactly to implement it. If multiple cold-cache requests are being made to the same unchanged resource on the server and the server returned different Expires header (say it uses relative time to calculate the exact value of the Expires date e.g. +6 hours from the request time), does that invalidate the cache on all the proxy servers in-between as well? Or is it impossible to happen (per the spec)? Does the Expires HTTP header needs to be consistent across multiple cold-cache requests?

  Read the article

• Performance improvement of client server system

  - by Tanuj

  I have a legacy client server system where the server maintains a record of some data stored in a sqlite database. The data is related to monitoring access patterns of files stored on the server. The client application is basically a remote viewer of the data. When the client is launched, it connects to the server and gets the data from the server to display in a grid view. The data gets updated in real time on the server and the view in the client automatically gets refreshed. There are two problems with the current implementation: When the database gets too big, it takes a lot of time to load the client. What are the best ways to deal with this. One option is to maintain a cache at the client side. How to best implement a cache ? How can the server maintain a diff so that it only sends the diff during the refresh cycle. There can be multiple clients and each client needs to display the latest data available on the server. The server is a windows service daemon. Both the client and the server are implemented in C#

  Read the article

• What is the correct HTTP status code to send when a site is down for maintenance?

  - by alex

  Is there a HTTP status code to tell Google (and others) to go away, index me again later? Basically, one that semantically tells clients that the site is down for maintenance? The ones I have considered are 304 => Not modified 307 => Temporary redirect 410 => Gone 503 => Service Unavailable I'm leaning towards the last one, but was just curious as to which one was proper choice. Thanks Update Is this the correct way to send it with PHP? header('Status: 503 Service Unavailable');

  Read the article

• Client side prediction/simulation Question

  - by Legendre

  I found a related question but it doesn't have what I needed. Client A sends input to move at T0. Server receives input at T1. All clients receive the change at T2. Question: With client-side prediction, client A would start moving at T0, client-side. All other clients receive the change at T2, so to them, client A only started moving at T2. If I understand correctly, client B will always see client A's past position and not his current position? How do I sync both client B and client A?

  Read the article

• Disabling X-FRAME-OPTION: SAMEORIGIN HTTP Response Header on SharePoint/PowerPivot xlsviewer.aspx

  - by Daniel Coffman

  I need to frame a page being served by SharePoint 2010's xlsviewer.aspx but this page is setting the HTTP response header X-FRAME-OPTION to SAMEORIGIN, so IE8 refuses to render the page in a frame on another domain, which is what I need. It appears that no other pages being served by this SharePoint instance set X-FRAME-OPTIONS, only _layouts/xlsviewer.aspx Where can I change the HTTP headers or framing options for SharePoint or this specific page? Relevant headers: GET //_layouts/xlviewer.aspx?id=whatever.xlsx&DefaultItemOpen=1 is returning: HTTP/1.1 200 OK . . . X-Frame-Options: SAMEORIGIN X-AspNet-Version: 2.0.50727 X-Powered-By: ASP.NET MicrosoftSharePointTeamServices: 14.0.0.4730

  Read the article

• Parse HTTP requests through Wireshark?

  - by diogobaeder

  Hi, guys, Is there any way to parse HTTP request data in wireshark? For example, can I expose the request parameters upon an HTTP GET request (being sent by my machine), so that I don't need to read the (sometimes) truncated URL and find them by myself? I was using Tamper Data and Firebug, on my Firefox, to analyse these requests, but they're not as reliable as a stand-alone tool for monitoring my network interface, but wireshark keeps data too raw concerning HTTP flow. If you guys know any other stand-alone tool that does this (must be Linux-compatible), please tell me. Thanks!

  Read the article

• Synergy, OSX client, Windows 7 server - No mouse on client

  - by Majenko

  I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

  Read the article

• HTTP Range request rejected

  - by Dan

  I am trying to understand why my production environment might be disallowing HTTP RANGE requests. I have a pool of W2K8x64/IIS7 servers behind a pair of Netscaler 9000s. I compose the following request in Fiddler: http://myorigin.example.com/file.flv User-Agent: Fiddler Host: myorigin.example.com Range: bytes=40000-60000 The response looks like: HTTP/1.1 200 OK Cache-Control: public Content-Type: video/x-flv Expires: Thu, 24 Jun 2010 18:23:53 GMT Last-Modified: Sat, 11 Apr 2009 00:16:14 GMT Accept-Ranges: none ETag: f9d5c718-e148-4225-9ca6-d1f91a2a3c08-_633749805744270000 Server: Microsoft-IIS/7.0 Edge-Control: max-age=2592000 X-Powered-By: ASP.NET Date: Tue, 25 May 2010 18:23:53 GMT Content-Length: 443668 "Accept-Ranges: none" tells me that the range request was rejected, but I am not sure where/why as IIS7 accepts Range by default. Could the 'scalers be shooting it down? Thanks, Dan

  Read the article

• I am unable to run a client/server program in php

  - by sibi

  This is the program I am trying to run: $host = "127.0.0.1"; $port = 25003; // don't timeout! set_time_limit(0); // create socket $socket = socket_create(AF_INET, SOCK_STREAM, 0) or die("Could not create socket\n"); // bind socket to port $result = socket_bind($socket, $host, $port) or die("Could not bind to socket\n"); // start listening for connections $result = socket_listen($socket, 3) or die("Could not set up socket listener\n"); // accept incoming connections // spawn another socket to handle communication $spawn = socket_accept($socket) or die("Could not accept incoming connection\n"); // read client input $input = socket_read($spawn, 1024) or die("Could not read input\n"); // clean up input string $input = trim($input); echo "Client Message : ".$input; // reverse client input and send back $output = strrev($input) . "\n"; socket_write($spawn, $output, strlen ($output)) or die("Could not write output\n"); // close sockets socket_close($spawn); socket_close($socket); I enabled the PHP_socket option in WAMP but still I keep getting errors like unable to bind. Can someone please help me out?

  Read the article

• HTTP downloads stop after some time, resuming is not possible

  - by cdauth

  When I try to download a file via HTTP, the downloads sometimes stop after around 30 MB. The download rates goes down to 0 B/s and no data keeps coming. When I stop the download and resume again, the download still hangs. But when I redownload it from byte 0 again, everything works fine up to 30 MB when it stops again. Sometimes, after some hours, it just works again without problems. The position in the file when the download stops is variable, but most of the time it is around 30–35 MB. As a download manager I use wget. The same behaviour happens though using curl and other download managers. The error occurs independently of the server I download from. I have also observed this error on other Linux computers in my network. All computers on my network run Gentoo Linux on x86. All internet connections on my network go through a server on my network which runs a transparent Squid proxy on port 80. That server is connected to a router, which is a Speedport W 700V by Deutsche Telekom AG. That router is connected to the internet using ADSL, with 448 kbit/s down speed and 96 kbit/s up speed. I am almost sure that my transparent proxy is not the problem. I turned that off without resolving the issue. I also connected to the router directly via WLAN without resolving the issue. I also tried to download over another port via HTTP. Furthermore, I tried to download the file using IPv6 with a gateway6 tunnel from my computer, which resulted in exactly the same problem. Now the strange thing is that everything works fine using FTP and HTTPS (also with wget on the same computer). Even more strange: when I resume the download that hanged over HTTP using FTP or HTTPS, download a few bytes that way, stop wget and then resume again using HTTP, it loads data again! But after a few MB, it may stop again. Unfortunately, files downloaded that way are always broken (the MD5 sum is not correct), so at some point, there must have been bogus data. I tried searching for HTML error messages in the downloaded file, but grep -i html does not find anything. (I cannot think of a way to search for GZIP-compressed HTML error messages in the file, so I did not try that.) I tried using strace on wget when it failed to resume a download, you can find the entire output on pastebin. The important lines are repeated every second: clock_gettime(CLOCK_MONOTONIC, {326102, 62176435}) = 0 ) = 1 write(2, "78% [++++++++++++++++++++++++++++"..., 19578% [+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ] 110,683,685 --.-K/s ) = 195 select(4, [3], NULL, NULL, {0, 949999}) = 0 (Timeout) I have absolutely no idea what could be the reason of this problem. It seems like whatever causes the issue speaks HTTP. It seems to speak HTTP that intelligently that it even regognises it in an IPv6-over-IPv4 tunnel. But what could that be and why does it only happen sometimes? The other possibility would be that there is a problem on my computer that is the same on other Gentoo Linux computers as well. Has anyone ever had such a problem? What could be the reason and where do I have to continue investigating to find out more about the issue? Update: I have just run into the problem again and tried to resume the download over the router’s WLAN, and this time it worked. Maybe I did something wrong during my last tests with the WLAN. Now maybe my transparent proxy server is in fact the problem. It is a very basic Squid proxy server that does not cache anything. Maybe the fact is interesting that a second Squid proxy runs on the same computer on another port. Update: A download hung again and this time I turned off all firewall settings and stopped all proxy servers. I failed to resume the download from my network server, which is directly connected to the router. So my proxy server definitely is not the cause the problem. I will try to upgrade the firmware of my router now, although I do not have admin access to it. I will see what I can do.

  Read the article

• How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

  - by joechip

  I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

  Read the article

• Dummy HTTP server for debugging

  - by Andrea

  This is more or less the inverse of my previous question. I need to debug some HTTP requests that I am making. Since these requests arise from the use of some external libraries, sometimes I am not sure of what is the actual data I am sending. Is there some dummy server (for Linux) that accepts HTTP requests and just prints them somewhere so that I can inspect them? I would like to be able to see in plain text the full request, like POST /foo HTTP/1.1 Host: www.example.com Accept: text/xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: en-gb,en;q=0.5 Content-Type: text/plain Content-Length: 11 Hello world

  Read the article

• How to use Cisco AnyConnect VPN Client?

  - by ktm5124

  I wrote a related question earlier, which is still unresolved. This question is much more specific. So I installed Cisco AnyConnect VPN Client on Snow Leopard. I connect to my work VPN. Once connected, I can't ping my work machine. I don't see any computers on the network. If the client were not running, I wouldn't believe myself to be connected to the VPN. Is there something that I am doing wrong? Do I have to route my network traffic through the tunnel manually? (ifconfig route comes to mind) Is the POST request that I am about to submit going to go through the tunnel created by my VPN? I guess the main question is: why do I feel so in the dark? Cisco says I am connected to my VPN, but for all I know it is invisible. N.B. I do have the up-to-date Cisco VPN Client: version 2.3.2016. I installed it about a week ago.

  Read the article

• why i cannot download jdk from oracle web site directly without AuthParam?

  - by hugemeow

  that is download with the following command, why it fails to download that file? wget http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin the following command works, but that AuthParam may not work after a while, why? wget http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin?AuthParam=1346955572_27e44512fe8ef5cb920c4c329e5f0fd8 how this AuthParam option is implemented? why i cannot download without this parameter? and why i can only get this parameter using explorer? is rewrite used in the oracle server when deal with wget request? why the same command not works after an hour, does the value of AuthParam expired? so how the server check whether the value of AuthParam is expired? wget http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin?AuthParam=1346955572_27e44512fe8ef5cb920c4c329e5f0fd8 --2012-09-07 03:51:01-- http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin?AuthParam=1346955572_27e44512fe8ef5cb920c4c329e5f0fd8 Resolving download.oracle.com... 23.67.251.50, 23.67.251.57 Connecting to download.oracle.com|23.67.251.50|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-09-07 03:51:01 ERROR 403: Forbidden. @KJ-SRS is that kind of CGI program which is used to judge if AuthParam is right? is that possible to download jdk package purely using wget command, and no need to get that AuthParam in explorer

  Read the article

• Plesk 9 - Client panel access via client domain, not server host name

  - by Ben

  I've setup a Plesk 9 vps recently. The plesk admin is accessible at, say, http://superawesomedomain.com:8443. I'm setting up a couple of client domains on the server. I'd like clients to be able to access plesk via a similar url, but instead it would be something like http://inferiorclientdomain.com:8443. This works ok in a sense, but it always redirect the request for inferiorclientdomain.com:8443 to superawesomedomain.com:8443. I'd like the control panel access url to remain on inferiorclientdomain.com. Is that possible? EDIT: System Info. Plesk 9.5.2 on CentOS 5 (Build 95100504.12)

  Read the article

• estimating size of reply HTTP headers

  - by Guanidene

  I am trying to download a file via a basic socket connection, using a HTTP GET request. So, I have to specify how many bytes of data coming in I have to read from the socket. However, I am having trouble deciding the amount of data (say, in bytes) the server would reply back with. I know that there is a "Content-Length" field in the reply sent by server, but that gives me the size of the actual data (without the http headers). Is there a way to get the exact size of HTTP headers sent by the server or an estimation is required? (I am doing this for downloading on a mobile network, where every bit of data matters in terms of time and money, so I don't wish to make an unnecessary larger estimate of the header size.)

  Read the article

• Regarding the functioning of the HTTP server

  - by Luv

  As all of us uses the HTTP protocol for accessing the web, and request at the port number 80 of the server, now suppose i want to browse or download a file then i will request to the HTTP server by specifying the complete URL. If the server is having file, it would return it if it is not having the file then what will it do? I think it will make the request to the appropriate server which would be having this file and get the file and return to us. In this way does the HTTP server acts as an intermediate between the client and the server? Please correct me if i am wrong here. Many many thanx in advance

  Read the article

• tmux: Suddenly, cannot horizontally split

  - by A__A__0

  As root, using a reasonably default .profile and .shrc and an empty tmux.conf, I am unable to split the window horizontally. There are a number of cases to consider so I'll list them clearly. Using the keybinding + empty configuration: nothing happens Using the keybinding + my configuration: a bell is generated, nothing else; occasionally, the split will appear and disappear immediately (maybe it always does this, but I'm connecting over ssh so it may not make it through) Using tmux split-window -h with any config: tmux immediately exits I've posted here in order the server and client verbose logs generated by tmux -v during the third case: server started, pid 9523 socket path /tmp/tmux-0/default new client 7 got 100 from client 7 got 101 from client 7 got 102 from client 7 got 103 from client 7 got 104 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 106 from client 7 got 200 from client 7 cmdq 0x801c6e080: new-session (client 7) new term: xterm xterm override: XT xterm override: Ms ]52;%p1%s;%p2%s xterm override: Cs ]12;%p1%s xterm override: Cr ]112 xterm override: Ss [%p1%d q xterm override: Se [2 q new key Oo: 0x1021 (KP/) new key Oj: 0x1022 (KP*) new key Om: 0x1023 (KP-) new key Ow: 0x1024 (KP7) new key Ox: 0x1025 (KP8) new key Oy: 0x1026 (KP9) new key Ok: 0x1027 (KP+) new key Ot: 0x1028 (KP4) new key Ou: 0x1029 (KP5) new key Ov: 0x102a (KP6) new key Oq: 0x102b (KP1) new key Or: 0x102c (KP2) new key Os: 0x102d (KP3) new key OM: 0x102e (KPEnter) new key Op: 0x102f (KP0) new key On: 0x1030 (KP.) new key OA: 0x101d (Up) new key OB: 0x101e (Down) new key OC: 0x1020 (Right) new key OD: 0x101f (Left) new key [A: 0x101d (Up) new key [B: 0x101e (Down) new key [C: 0x1020 (Right) new key [D: 0x101f (Left) new key OH: 0x1018 (Home) new key OF: 0x1019 (End) new key [H: 0x1018 (Home) new key [F: 0x1019 (End) new key Oa: 0x501d (C-Up) new key Ob: 0x501e (C-Down) new key Oc: 0x5020 (C-Right) new key Od: 0x501f (C-Left) new key [a: 0x901d (S-Up) new key [b: 0x901e (S-Down) new key [c: 0x9020 (S-Right) new key [d: 0x901f (S-Left) new key [11^: 0x5002 (C-F1) new key [12^: 0x5003 (C-F2) new key [13^: 0x5004 (C-F3) new key [14^: 0x5005 (C-F4) new key [15^: 0x5006 (C-F5) new key [17^: 0x5007 (C-F6) new key [18^: 0x5008 (C-F7) new key [19^: 0x5009 (C-F8) new key [20^: 0x500a (C-F9) new key [21^: 0x500b (C-F10) new key [23^: 0x500c (C-F11) new key [24^: 0x500d (C-F12) new key [25^: 0x500e (C-F13) new key [26^: 0x500f (C-F14) new key [28^: 0x5010 (C-F15) new key [29^: 0x5011 (C-F16) new key [31^: 0x5012 (C-F17) new key [32^: 0x5013 (C-F18) new key [33^: 0x5014 (C-F19) new key [34^: 0x5015 (C-F20) new key [2^: 0x5016 (C-IC) new key [3^: 0x5017 (C-DC) new key [7^: 0x5018 (C-Home) new key [8^: 0x5019 (C-End) new key [6^: 0x501a (C-NPage) new key [5^: 0x501b (C-PPage) new key [11$: 0x9002 (S-F1) new key [12$: 0x9003 (S-F2) new key [13$: 0x9004 (S-F3) new key [14$: 0x9005 (S-F4) new key [15$: 0x9006 (S-F5) new key [17$: 0x9007 (S-F6) new key [18$: 0x9008 (S-F7) new key [19$: 0x9009 (S-F8) new key [20$: 0x900a (S-F9) new key [21$: 0x900b (S-F10) new key [23$: 0x900c (S-F11) new key [24$: 0x900d (S-F12) new key [25$: 0x900e (S-F13) new key [26$: 0x900f (S-F14) new key [28$: 0x9010 (S-F15) new key [29$: 0x9011 (S-F16) new key [31$: 0x9012 (S-F17) new key [32$: 0x9013 (S-F18) new key [33$: 0x9014 (S-F19) new key [34$: 0x9015 (S-F20) new key [2$: 0x9016 (S-IC) new key [3$: 0x9017 (S-DC) new key [7$: 0x9018 (S-Home) new key [8$: 0x9019 (S-End) new key [6$: 0x901a (S-NPage) new key [5$: 0x901b (S-PPage) new key [11@: 0xd002 (C-S-F1) new key [12@: 0xd003 (C-S-F2) new key [13@: 0xd004 (C-S-F3) new key [14@: 0xd005 (C-S-F4) new key [15@: 0xd006 (C-S-F5) new key [17@: 0xd007 (C-S-F6) new key [18@: 0xd008 (C-S-F7) new key [19@: 0xd009 (C-S-F8) new key [20@: 0xd00a (C-S-F9) new key [21@: 0xd00b (C-S-F10) new key [23@: 0xd00c (C-S-F11) new key [24@: 0xd00d (C-S-F12) new key [25@: 0xd00e (C-S-F13) new key [26@: 0xd00f (C-S-F14) new key [28@: 0xd010 (C-S-F15) new key [29@: 0xd011 (C-S-F16) new key [31@: 0xd012 (C-S-F17) new key [32@: 0xd013 (C-S-F18) new key [33@: 0xd014 (C-S-F19) new key [34@: 0xd015 (C-S-F20) new key [2@: 0xd016 (C-S-IC) new key [3@: 0xd017 (C-S-DC) new key [7@: 0xd018 (C-S-Home) new key [8@: 0xd019 (C-S-End) new key [6@: 0xd01a (C-S-NPage) new key [5@: 0xd01b (C-S-PPage) new key [I: 0x1031 ((null)) new key [O: 0x1032 ((null)) new key OP: 0x1002 (F1) new key OQ: 0x1003 (F2) new key OR: 0x1004 (F3) new key OS: 0x1005 (F4) new key [15~: 0x1006 (F5) new key [17~: 0x1007 (F6) new key [18~: 0x1008 (F7) new key [19~: 0x1009 (F8) new key [20~: 0x100a (F9) new key [21~: 0x100b (F10) new key [23~: 0x100c (F11) new key [24~: 0x100d (F12) new key [2~: 0x1016 (IC) new key [3~: 0x1017 (DC) replacing key OH: 0x1018 (Home) replacing key OF: 0x1019 (End) new key [6~: 0x101a (NPage) new key [5~: 0x101b (PPage) new key [Z: 0x101c (BTab) replacing key OA: 0x101d (Up) replacing key OB: 0x101e (Down) replacing key OD: 0x101f (Left) replacing key OC: 0x1020 (Right) spawn: /bin/sh -- session 0 created writing 207 to client 7 got 208 from client 7 input_parse: '#' ground input_parse: ' ' ground keys are 7 ([?1;2c) received service class 1 complete key [?1;2c 0xfff keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (m) complete key m 0x6d input_parse: 'm' ground keys are 1 (u) complete key u 0x75 input_parse: 'u' ground keys are 1 (x) complete key x 0x78 input_parse: 'x' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (s) complete key s 0x73 input_parse: 's' ground keys are 1 (p) complete key p 0x70 input_parse: 'p' ground keys are 1 (l) complete key l 0x6c input_parse: 'l' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 () complete key 0x7f input_parse: '' ground input_c0_dispatch: ' input_parse: '' ground input_parse: '[' esc_enter input_parse: 'K' csi_enter input_csi_dispatch: 'K' "" "" keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (n) complete key n 0x6e input_parse: 'n' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 (o) complete key o 0x6f input_parse: 'o' ground keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (h) complete key h 0x68 input_parse: 'h' ground keys are 1 ( ) complete key 0xd input_parse: ' ' ground input_c0_dispatch: ' input_parse: ' ' ground input_c0_dispatch: ' new client 13 got 100 from client 13 got 101 from client 13 got 102 from client 13 got 103 from client 13 got 104 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 106 from client 13 got 200 from client 13 cmdq 0x801c6e160: split-window -h (client 13) spawn: /bin/sh -- writing 203 to client 13 input_parse: '#' ground input_parse: ' ' ground input_parse: '#' ground input_parse: ' ' ground lost client 13 session 0 destroyed writing 203 to client 7 got 205 from client 7 writing 204 to client 7 lost client 7 got 207 from server got 203 from server got 204 from server There are some other peculiarities: With a newly created user (from which I overwrote root's .profile and .shrc, tmux works perfectly. Occasionally (twice out of the 50 or so times I've tested it), the splitting will work fine once in a session. (This happened for example when I ran ktrace on tmux, which I can also post) To explain the 'suddenly' part of the title: when I started my newly updated mysql56-server, tmux immediately exited and lost the session. Recently I changed architectures, from FreeBSD 10.0 i386 to amd64, and I am still working through shared library incompatibilities. I suspect that this could be involved, but I can't imagine how an incompatibility of this sort could result in such a specific, isolated failure.

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >