Search Results

Search found 1317 results on 53 pages for 'sata'.

Page 16/53 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • How to recover zfs pool when root fs fails?

    - by user27138
    I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system root and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data (other then the system). How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

    Read the article

  • Will Ubuntu break my RAID 0 array?

    - by Chad
    I am upgrading an older machine today with new Motherboard, RAM, and CPU. Then I am going to do a fresh install of Ubuntu 64bit. Currently the old machine has an 80gb system drive, and a 4TB RAID 0 array. The old Motherboard has no SATA ports, so I used a SATA card. Ubuntu set up the old RAID array, will it still recognize the array on a newer machine? Are there any steps I should take to ensure the array isn't damaged? It's non-crucial data, but I would rather not start over if it can be avoided. Thanks.

    Read the article

  • Windows 7 restarts PC when selected from GRUB Menu

    - by Dan Still
    I installed windows 7 on a RAID 5 (2@160GB SATA +1@160GB SATA for RAID 5) I then proceeded to install Ubuntu 11.10 using the Live CD and opted: "Install along side Windows 7 Option" Upon boot GRUB appears normally and I can select and run Ubuntu with no difficulties. When I select Windows 7 from GRUB the PC restarts and consequently goes back to GRUB. I have attempted to use the Windows 7 DVD to repair the installation but to no avail. The Wizard ran twice as it described it might, after the second attempt came back with an '...inability to repair...' error. I am sure there is an answer to this somewhere but I have yet to be able to find it. (2 weeks and countless attempts and searches before posting this question. Although I am happy to use Ubuntu alone my wife likes to watch Netflix and therein requires the Windows 7 installation. Any answers are appreciated and welcomed. Thanks in advance. Dan Still

    Read the article

  • How to avoid HDD spin up at system start? (Ubuntu from SSD)

    - by Oliver
    Thanks to hdparm -B1 /dev/sdb my HDD does no longer spin up when powered up on boot. But after completing the BIOS POST messages and starting Ubuntu the HDD gets a signal over the SATA data cable and spins up. Leaving the data cable (but still with plugged in SATA power cable) let the system boot up completely from my SSD without spinning up the HDD. What causes the HDD to spin up? Maybe Grub2? Edit: nope, doesn't seem to be Grub2 that spins up the drive. I just set up Grub to show its menu without timer. Nothings happens until I hit the Ubuntu standard boot option, then a few seconds later the drive spins up.

    Read the article

  • Ubuntu install doesn't recognize kingston SSDnow sv 200 90g

    - by Quique Garcia
    I'm trying install Ubuntu 12.04 on my new Kingston SSD Now SVP200S3/90G, but the installer doesn't list this disk to be installed. However gparted let me do any partitioning operation correctly. I've tryed with Ubuntu Studio and Ubuntu Desktop on different machines: Lenovo ThinkPad T400, Lenovo ThinkStation C20, MoBo ASUS Crosshair V formula. SATA controller in all machines has been set to AHCI and IDE operation and different SATA ports with no luck. The firmware on the SSD has been updated to V.503xxx (latest on kingston page) Any help is appreciated, regards!

    Read the article

  • AHCI Hotswap in Lucid Server

    - by chong
    Does Lucid support hotswapping of AHCI devices? Is there anything more to it than simply unmounting all filesystems on the drive to be disconnected and plugging in the new disk? 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) is the controller I'm working with. BIOS is set to AHCI. I also tried simply unmounting and unplugging. That seemed to work fine. Plugging in a new drive locked up the system. AHCI kernel module is also loaded. I've also looked at the Raid WIKI on kernel.org which talks about hardware requirements for AHCI HotSwapping of disks. My drives and cables all appear to meet the criteria, but most of that info pertains to the electrical side (grounding, etc...).

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • SSD-HDD price parity

    - by jchang
    It is hard to believe that we are essentially at SSD-HDD price parity? Of course I am comparing enterprise class 10K/15K HDDs to consumer grade SSDs. Below are prices I am seeing 300GB 15K HDD $370 900GB 10K HDD $600 1TB 7200 HDD $230 (less for consumer HDDs) 512GB SATA SSD $400-600 Intel SSD DC S3700 400GB $940 The 512GB SATA SSDs are consumer grade, MLC NAND, with only 7% over provisioning. That is 512GB (1GB = 2^30) of NAND, with 512GB (1GB =10^9) of user capacity. Intel just announced the SSD...(read more)

    Read the article

  • Not mounting/finding 1TB NTFS drive

    - by Dave
    I am having trouble with Ubuntu recognizing/finding/mounting one of my hard drives. I dual boot Ubuntu and Windows 7. I had Ubuntu 10.04 and all drives showed up under "Places" I could click on any of my Windows/NTFS drives and they would mount as they should. I have since updated to Ubuntu 10.10. One of my drives no longer shows up in "Places" or in Nautilus. I can open gparted and it is listed there, but if I try to click the mount button, I get an error. I am currently at work and can not post any screenshots or errors, but will happily do so later. I was just hoping that someone might be able to give me something to try when I get home. 250gig SATA hard drive (Windows7/NTFS) - recognized/mountable 200gig PATA hard drive (Ubuntu 10.10) - recognized (obviously) 1TB SATA hard drive (NTFS) - not recognized/won't mount Thanks!

    Read the article

  • Configuring Dropbox on Ubuntu server

    - by Daniel
    I've got a Ubuntu server running on an old laptop. The OS is on a 4GB USB drive and I use a SATA drive attached for storage. Now I wanted to set up Dropbox on this machine. I've got it running using this guide: http://www.byteindia.com/internet/install-dropbox-on-linux/482/. But I haven't synched yet because there won't be enough room in my home dir. My /home is on my 4GB USB since I never use it and all my data is on the 2TB drive mounted in /media/. What is the best way to set this up? Dropbox doesn't support moving the folder in Linux yet. I found a script to move the folder but it seems outdated. Perhaps I can use symlinks in some clever way? Or maybe move my /home folder to my SATA drive? Thanks in advance

    Read the article

  • Problemas com instalação do Ubuntu 12.04 LTS e 13.04

    - by user160096
    Não consegui, apesar de diversas tentativas, instalar nenhuma das versões: 12.04 LTS e 13.04. Cheguei a trocar de mouse,uma vez que o anterior não era reconhecido pelo sistema. Configuração: Motherboard Gigabyte GA-970A-D3 8 Gb de memória DDR-3 1 Hd Sata II Samsung de 80Gb, com Windows 7 Ultimate SP-1 1 Hd Sata II de 1Tb Samsung, como dispositivo de dados 1 Monitor 23" Phiips CL 234 1 Placa de Vídeo Gigayte NVidia GeForce GT-220 1 Placa Ethernet Realtek RTL 8139/810x 1 Mouse Microsoft (com software IntelliPoint 8.2) 1 Mouse Logitech M-100 (que usei para subsitutir o da Microsoft, SEM SUCESSO!!!) Na última tentativa, o instalador do ubuntu (tanto no 12.04 quanto no 13.04, PASMEM, não reconheceu o Win7 instalado...foi aí que 'JOGUEI A TOALHA"...! Apesar de minha simpatia pela liberdade e SO's livres e bons, dificuldades como esta desencorajam a transição/migração do usuário... É de se pensar sobre isto...!

    Read the article

  • New Seagate SSD and Hard Disks

    - by jchang
    Seagate today announced a near complete overhaul of their enterprise product line. This include second generation SSD now with either SAS and SATA interfaces. The first generation Pulsar SSD only supported SATA interface. The new 2.5in 15K and 10K hard drive models have higher capacity. The 2.5in 7.2K hard drive was upgraded to 1TB last month? The 7.2K 3.5in is now available upto 3TB. All models support 6Gbps. The new second generation Seagate Pulsar SSD comprises two product lines. The Pulsar XT.2...(read more)

    Read the article

  • solaris zpool SSD cache device "faulted"

    - by John-ZFS
    I am trying to get over these SATA SSD errors - smartctl command failed to read the SATA SSD - SATA is not supported what could be the reason for errors? does this mean that SSD has reached EOL & needs to be replacement? errors: No known data errors pool: zpool1216 state: DEGRADED status: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the faulted device, or use 'zpool clear' to mark the device repaired. scan: scrub repaired 0 in 0h24m with 0 errors on Fri May 18 14:31:08 2012 config: NAME STATE READ WRITE CKSUM zpool1216 DEGRADED 0 0 0 raidz1-0 ONLINE 0 0 0 c11t10d0 ONLINE 0 0 0 c11t11d0 ONLINE 0 0 0 c11t12d0 ONLINE 0 0 0 c11t13d0 ONLINE 0 0 0 c11t14d0 ONLINE 0 0 0 c11t15d0 ONLINE 0 0 0 c11t16d0 ONLINE 0 0 0 c11t1d0 ONLINE 0 0 0 c11t2d0 ONLINE 0 0 0 c11t3d0 ONLINE 0 0 0 c11t4d0 ONLINE 0 0 0 c11t5d0 ONLINE 0 0 0 c11t6d0 ONLINE 0 0 0 c11t7d0 ONLINE 0 0 0 c11t8d0 ONLINE 0 0 0 c11t9d0 ONLINE 0 0 0 logs c9d0 FAULTED 0 0 0 too many errors cache c10d0 FAULTED 0 17 0 too many errors

    Read the article

  • Ubuntu raid 1 write errors

    - by Micah
    I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

    Read the article

  • Enabling AHCI in BIOS for SSD

    - by Robert
    I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

    Read the article

  • Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

    - by knda
    I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

    Read the article

  • Problem with setting up raid5 on Freenas, Please help.

    - by Benjy23
    Hey Guys, I've been running Freenas for awhile now. Hardware is 1.8celeron Ram 1GB Sata Card is Via - not sure the model.... its 2 ports and I have 6 x 1.5TB HDs All ran ok while running on 1.5TB, no raid. I'm now trying to create a raid5 with my 6 hds. Software raid... is it normal for it to take roughly up to 2 weeks just to build the raid? Sorry, I'm very new to implementing raid and googling doesn't tell much other than it takes a long time. Also the Raid building process seems to fail many times... going to degraded. I suspect its cos 4 of my HDs are connected to my motherboard and the other 2 are connected to my sata card...what's your take? I'm considering 2 options now... either get a 8 port sata card and attach all the HDs to it. Or get a raid controller 8 portcard which is probably gonna be more pricey... also how do you access hardware raid through Freenas? I like how Freenas emails you should your harddrive fails so can this be done as well with hardware raid? Thanks in advance guys.

    Read the article

  • How come my Intel 520 180GB SSD performs extremely poorly?

    - by Willem
    I recently installed a new Intel 520 series 180GB SSD in my brand new MacBook Pro. The system is as follows: Model: MacBook Pro 15-inch, Late 2011 (MacBookPro8,2) Processor: 2.4 GHz Intel Core i7 Memory: 16 GB 1333 MHz DDR3 Graphics: AMD Radeon HD 6770M 1024 MB Software: Mac OS X Lion 10.7.3 Main Drive Bay: Intel 520-series 180GB SATA-3 (6GB/s negotiated link) SSD (Firmware: 400i) [80GB free] Optical Bay: Toshiba 5400 RPM 750GB SATA-2 HDD Trim: Enabled (according to Trim Enabler App) And here are the speeds I'm getting: Read: 412 MB/s Write: 186 MB/s What have I done wrong? Results expected: Read/write both 500MB/s I have seen benchmarks with lesser SSD:s (SATA-2 even) outperform my write-speeds by far. Also, Intel 520 SSD:s are supposed to be the top class of SSD:s. Trim Enabler report: This looks a bit odd compared to screenshots from their site: These is the defined S.M.A.R.T attributes (taken from Intel): And here are my S.M.A.R.T attributes read using smartctl tool from smartmontools: They don't seem very compatible. I'm going to try and look for a S.M.A.R.T attributes reader tool for OS X which might support Intel 520 series.

    Read the article

  • New SSD, is the MBR broken? DISK BOOT FAILURE

    - by Shevek
    I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

    Read the article

  • How do I install Windows XP from an external hard drive?

    - by Plasmer
    I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

    Read the article

  • Getting access to physical drives in ESXi v5.5 installation on Dell PowerEdge R710 with PERC 6/i

    - by Big-Blue
    I've acquired a Dell PowerEdge R710 server a few days ago, which includes a PERC 6/i RAID controller. The server is now fitted with a SATA SSD, one SAS drive and four SATA HDD's, all of which I would like to be passed through to ESXi in an "as-is" state, without creating any logical drives in the RAID controller. Now, the ESXi v5.5 installation image I grabbed from the Dell homepage starts just fine but only lists the logical drives and connected flash drives as possible installation targets, not any of the physical drives. If I create a small logical drive on my SSD (which the PERC 6/i detects as SATA-SSD type), the ESXi install wizard lists the SSD value on that drive as false; which is far from optimal. I have also tried disabling the RAID controller entirely in the setup, but that also did not help. Everything that should enable passthrough is enabled in BIOS, but that shouldn't be a concern at this early stage of the ESXi installation. How would I be able to install ESXi v5.5 to a part of my SSD that is connected to the storage controller, while giving it entire physical access to the disk (to allow for SMART values to be read etc.)?

    Read the article

  • Linux Software RAID1: How to boot after (physically) removing /dev/sda? (LVM, mdadm, Grub2)

    - by flight
    A server set up with Debian 6.0/squeeze. During the squeeze installation, I configured the two 500GB SATA disks (/dev/sda and /dev/sdb) as a RAID1 (managed with mdadm). The RAID keeps a 500 GB LVM volume group (vg0). In the volume group, there's a single logical volume (lv0). vg0-lv0 is formatted with extfs3 and mounted as root partition (no dedicated /boot partition). The system boots using GRUB2. In normal use, the systems boots fine. Also, when I tried and removed the second SATA drive (/dev/sdb) after a shutdown, the system came up without problem, and after reconnecting the drive, I was able to --re-add /dev/sdb1 to the RAID array. But: After removing the first SATA drive (/dev/sda), the system won't boot any more! A GRUB welcome message shows up for a second, then the system reboots. I tried to install GRUB2 manually on /dev/sdb ("grub-install /dev/sdb"), but that doesn't help. Appearently squeeze fails to set up GRUB2 to launch from the second disk when the first disk is removed, which seems to be quite an essential feature when running this kind of Software RAID1, isn't it? At the moment, I'm lost whether this is a problem with GRUB2, with LVM or with the RAID setup. Any hints?

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    Hi All, I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: http://superuser.com/questions/12955/how-do-i-remove-the-option-to-eject-sata-drives-from-the-windows-7-tray-icon

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: How do I remove the option to eject SATA drives from the Windows 7 tray icon?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >