Search Results

Search found 23489 results on 940 pages for 'commit message'.

Page 161/940 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• Git repo planning questions

  - by masonk

  At work, development uses perforce to handle code sharing. I won't say "revision control", because we aren't allowed to check in changes until they are ready for regression testing. In order to get my personal change sets under revision control, I've been given the go-ahead to build my own git and initialize the client view of the perforce depot as a git repo. There are some difficulties in doing this, however. The client view lives in a subfolder of ~, (~/p4), and I want to put ~ under revision control as well, with its own separate history. I can't figure out how to keep the history for ~ separate from ~/p4 without using a submodule. The problem with a submodule is that it looks like I have to go make a repository that will become the submodule and then git submodule add <repo> <path>. But there is nowhere to make the submodule's repository except in ~. There seems to be no safe place to create the initial client view of the depot with git p4 clone. (I'm working off of the assumption that initing or cloning a repo into a subdirectory of a git repo is not supported. At least, I can find nothing authoritative on nested git repos.) edit: Is merely ignoring ~/p4 in the repo rooted at ~ enough to allow me to init a nested repo in ~/p4? My __git_ps1 function still thinks I'm in a git repository when I visit an ignored subdirectory of a git repo, so I'm inclined to think not. I need the "remote" repository created by git p4 sync to be a branch in ~/p4. We are required to keep all of our code in ~/p4 so that it doesn't get backed up. Can I pull from a "remote" branch that is really a local branch? This one is just for convenience, but I thought I could learn something by asking it. For 99% of the project, I just want to start the with the p4 head revision as the inital commit object. For the other 1%, I would like to suck down the entire p4 history so that I can browse it in git. IOW, after I'm done initalizing it, the initial commit of remotes/p4/master branch will contain: revision 1 of //depot/prod/Foo/Bar/* revision X of other files in //depot/prod/*, where X is the head revision and the remotes/p4/master branch contains Y commits, where Y is the number of changelists that had a file in //depot/prod/Foo/Bar/*, with each commit in the history corresponding to one of those p4 changelists, and HEAD looking like p4's head.

  Read the article

• How to create a console application that does not terminate?

  - by John

  Hello, In C++,a console application can have a message handler in its Winmain procedure.Like this: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { HWND hwnd; MSG msg; #ifdef _DEBUG CreateConsole("Title"); #endif hwnd = CreateDialog(hInstance, MAKEINTRESOURCE(IDD_DIALOG1), NULL, DlgProc); PeekMessage(&msg, NULL, 0, 0, PM_NOREMOVE); while(msg.message != WM_QUIT) { if(PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { if(IsDialogMessage(hwnd, &msg)) continue; TranslateMessage(&msg); DispatchMessage(&msg); } } return 0; } This makes the process not close until the console window has received WM_QUIT message. I don't know how to do something similar in delphi. My need is not for exactly a message handler, but a lightweight "trick" to make the console application work like a GUI application using threads. So that, for example, two Indy TCP servers could be handled without the console application terminating the process. My question: How could this be accomplished?

  Read the article

• Objective-C respondsToSelector question.

  - by Holli

  From what I have learned so far: In Objective-C you can send any message to any object. If the object does implement the right method it will be executed otherwise nothing will happen. This is because before the message is send Objective-C will perform respondsToSelector. I hope I am right so far. I did a little program for testing where an action is invoked every time a slider is moved. Also for testing I set the sender to NSButton but in fact it is an NSSlider. Now I asked the object if it will respond to setAlternateTitle. While a NSButton will do and NSSlider will not. If I run the code and do respondsToSelector myself it will tell me the object will not respond to that selector. If I test something else like intValue, it will respond. So my code is fine so far. - (IBAction)sliderDidMove:(id)sender { NSButton *slider = sender; BOOL responds = [slider respondsToSelector:@selector(setAlternateTitle)]; if(responds == YES) { NSLog(@"YES"); } else { NSLog(@"NO"); } [slider setAlternateTitle:@"Hello World"]; } But when I actually send the setAlternateTitle message the program will crash and I am not exactly sure why. Shouldn't it do a respondsToSelector before sending the message?

  Read the article

• Shell Script Sequencing with Rake

  - by Haseeb Khan

  Hi All, I am working on a rake utility and want to implement something mentioned below: There are some shell commands in a sequence in my Rake file. What I want is that the sequence should wait for the previous command to finish processing before it moves to the next one. sh "git commit -m \"#{args.commit_message}\"" do |ok, res| # Do some processing end sh "git push heroku master" So, in the above example what I want is that sh "git push heroku master" shouldn't be executed until the processing in the sh "git commit -m \"#{args.commit_message}\"" do |ok, res| # Do some processing end is completed. Also another nice to have would be that if I can store the output of the shell command in a Ruby variable so it can be used in further manipulation if required. Looking forward to a reply from the fellow community member shortly. Thanks in advance.

  Read the article

• How do the XMPP modules work in perl?

  - by TheGNUGuy

  Hey everybody, I am trying to make my own jabber bot but i have run into a little trouble. I have gotten my bot to respond to messages, however, if I try to change the bot's presence then it seems as though all of the messages you send to the bot get delayed. What I mean is when I run the script I change the presence so I can see that it is online. Then When I send it a message it takes 3 before the callback subroutine i have set up for messages gets called. After the 3rd message is sent and the chat subroutine is called it still process the first message I sent. This really doesn't pose TOO much of a problem except that I have it set up to log out when I send the message "logout" and it has to be followed by two more messages in order to log out. I am not sure what it is that I have to do to fix this but i think it has something to do with iq packets because I have an iq callback set as well and it gets called 2 times after setting the presence. Here is my source code: http://pastebin.com/MgKMhTML Thanks for your help!

  Read the article

• Looping through a SimpleXML object, or turning the whole thing into an array.

  - by Coffee Cup

  I'm trying to work out how to iterate though a returned SimpleXML object. I'm using a toolkit called Tarzan AWS, which connects to Amazon Web Services (SimpleDB, S3, EC2, etc). I'm specifically using SimpleDB. I can put data into the Amazon SimpleDB service, and I can get it back. I just don't know how to handle the SimpleXML object that is returned. The Tarzan AWS documentation says this: Look at the response to navigate through the headers and body of the response. Note that this is an object, not an array, and that the body is a SimpleXML object. Here's a sample of the returned SimpleXML object: [body] = SimpleXMLElement Object ( [QueryWithAttributesResult] = SimpleXMLElement Object ( [Item] = Array ( [0] = SimpleXMLElement Object ( [Name] = message12413344443260 [Attribute] = Array ( [0] = SimpleXMLElement Object ( [Name] = active [Value] = 1 ) [1] = SimpleXMLElement Object ( [Name] = user [Value] = john ) [2] = SimpleXMLElement Object ( [Name] = message [Value] = This is a message. ) [3] = SimpleXMLElement Object ( [Name] = time [Value] = 1241334444 ) [4] = SimpleXMLElement Object ( [Name] = id [Value] = 12413344443260 ) [5] = SimpleXMLElement Object ( [Name] = ip [Value] = 10.10.10.1 ) ) ) [1] = SimpleXMLElement Object ( [Name] = message12413346907303 [Attribute] = Array ( [0] = SimpleXMLElement Object ( [Name] = active [Value] = 1 ) [1] = SimpleXMLElement Object ( [Name] = user [Value] = fred ) [2] = SimpleXMLElement Object ( [Name] = message [Value] = This is another message ) [3] = SimpleXMLElement Object ( [Name] = time [Value] = 1241334690 ) [4] = SimpleXMLElement Object ( [Name] = id [Value] = 12413346907303 ) [5] = SimpleXMLElement Object ( [Name] = ip [Value] = 10.10.10.2 ) ) ) ) So what code do I need to get through each of the object items? I'd like to loop through each of them and handle it like a returned mySQL query. For example, I can query SimpleDB and then loop though the SimpleXML so I can display the results on the page. Alternatively, how do you turn the whole shebang into an array? I'm new to SimpleXML, so I apologise if my questions aren't specific enough.

  Read the article

• Committing when changing source formatting?

  - by chrisgoyal

  Is it accepted practice to commit even when you're just changing things like whitespace, code formatting, etc.?

  Read the article

• Getting content from PHP: Trouble with POST and query.

  - by vgm64

  Apologies for my longest question on SO ever. I'm trying to interface with a php frontend for a mysql database in ROOT (a CERN framework in C++ for high energy physics analysis). To start off with, I tried to get this php interface to play nice with wget and curl first because I'm more familiar with them. The following command works: wget --post-data "hostname=localhost:3306&un=joeuser&pw=psswd&myquery=show_spazio_databases;" http://some.host.edu/log/log_query_matlab.php The results are: database1 database2 That's good. If I leave out the --post-data then I get the result: Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'admin'@'localhost' (using password: NO) in /log/log_query_matlab.php on line 6 i'm dead! Access denied for user 'admin'@'localhost' (using password: NO) Warning: mysql_query() [function.mysql-query]: Access denied for user 'admin'@'localhost' (using password: NO) in /log/log_query_matlab.php on line 29 Warning: mysql_query() [function.mysql-query]: A link to the server could not be established in /log/log_query_matlab.php on line 29 I have access to the php script (read only), but the error itself isn't too important. What matters it that using ROOT, I use a function called as socket.SendRaw(message, message.Length()) (socket is a TSocket) and this gives me the same "error" as wget without the post data switch if my "message" is "POST http://some.host.edu/log/log_query_matlab.php?hostname=localhost:3306&un=joeuser&pw=psswd&myquery=show_spazio_databases" This may be in vain, but does someone knows a way I should format the "message" that includes something that is equivalent to the --post-data switch. Or, is there a standard way to format POST requests in a single line (I've seen multi-line stuff. Is that right?) Sorry I'm clueless! PS. The mysql query is show databases but the space has been replaced with _spazio_, Italian for space. The author of the db and php interface requires it (and various replacements for symbols), but has anyone seen this before? Trying to troubleshoot that was terrible!

  Read the article

• How do I use Perl's WWW::Facebook::API to publish to a user's newsfeed?

  - by Russell C.

  We use Facebook Connect on our site in conjunction with the WWW::Facebook::API CPAN module to publish to our users newsfeed when requested by the user. So far we've been able to successfully update the user's status using the following code: use WWW::Facebook::API; my $facebook = WWW::Facebook::API->new( desktop => 0, api_key => $fb_api_key, secret => $fb_secret, session_key => $query->cookie($fb_api_key.'_session_key'), session_expires => $query->cookie($fb_api_key.'_expires'), session_uid => $query->cookie($fb_api_key.'_user') ); my $response = $facebook->stream->publish( message => qq|Test status message|, ); However, when we try to update the code above so we can publish newsfeed stories that include attachments and action links as specified in the Facebook API documentation for Stream.Publish, we have tried about 100 different ways without any success. According to the CPAN documentation all we should have to do is update our code to something like the following and pass the attachments & action links appropriately which doesn't seem to work: my $response = $facebook->stream->publish( message => qq|Test status message|, attachment => $json, action_links => [@links], ); For example, we are passing the above arguments as follows: $json = qq|{ 'name': 'i\'m bursting with joy', 'href': ' http://bit.ly/187gO1', 'caption': '{*actor*} rated the lolcat 5 stars', 'description': 'a funny looking cat', 'properties': { 'category': { 'text': 'humor', 'href': 'http://bit.ly/KYbaN'}, 'ratings': '5 stars' }, 'media': [{ 'type': 'image', 'src': 'http://icanhascheezburger.files.wordpress.com/2009/03/funny-pictures-your-cat-is-bursting-with-joy1.jpg', 'href': 'http://bit.ly/187gO1'}] }|; @links = ["{'text':'Link 1', 'href':'http://www.link1.com'}","{'text':'Link 2', 'href':'http://www.link2.com'}"]; The above, nor any of the other representations we tried seem to work. I'm hoping some other perl developer out there has this working and can explain how to create the attachment and action_links variables appropriately in Perl for posting to the Facebook news feed through WWW::Facebook::API. Thanks in advance for your help!

  Read the article

• WCF, IIS6.0 (413) Request Entity Too Large.

  - by Andrew Kalashnikov

  Hello, guys. I've got annoyed problem. I've got WCF service(basicHttpBinding with Transport security Https). This service implements contract which consists 2 methods. LoadData. GetData. GetData works OK!. My client received pachage ~2Mb size without problems. All work correctly. But when I try load data by bool LoadData(Stream data); - signature of method I'll get (413) Request Entity Too Large. Stack Trace: Server stack trace: ? ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding) System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) I try this http://blogs.msdn.com/jiruss/archive/2007/04/13/http-413-request-entity-too-large-can-t-upload-large-files-using-iis6.aspx. But it doesn't work! My server is 2003 with IIS6.0. Please help.

  Read the article

• .NET Sockets Buffer Overflow No Error

  - by Michael Covelli

  I have one thread that is receiving data over a socket like this: while (sock.Connected) { // Receive Data (Block if no data) recvn = sock.Receive(recvb, 0, rlen, SocketFlags.None, out serr); if (recvn <= 0 || sock == null || !sock.Connected) { OnError("Error In Receive, recvn <= 0 || sock == null || !sock.Connected"); return; } else if (serr != SocketError.Success) { OnError("Error In Receive, serr = " + serr); return; } // Copy Data Into Tokenizer tknz.Read(recvb, recvn); // Parse Data while (tknz.MoveToNext()) { try { ParseMessageAndRaiseEvents(tknz.Buffer(), tknz.Length); } catch (System.Exception ex) { string BadMessage = ByteArrayToStringClean(tknz.Buffer(), tknz.Length); string msg = string.Format("Exception in MDWrapper Parsing Message, Ex = {0}, Msg = {1}", ex.Message, BadMessage); OnError(msg); } } } And I kept seeing occasional errors in my parsing function indicating that the message wasn't valid. At first, I thought that my tokenizer class was broken. But after logging all the incoming bytes to the tokenizer, it turns out that the raw bytes in recvb weren't a valid message. I didn't think that corrupted data like this was possible with a tcp data stream. I figured it had to be some type of buffer overflow so I set sock.ReceiveBufferSize = 1024 * 1024 * 8; and the parsing error never, ever occurs in testing (it happens often enough to replicate if I don't change the ReceiveBufferSize). But my question is: why wasn't I seeing an exception or an error state or something if the socket's internal buffer was overflowing before I changed this buffer size?

  Read the article

• Multi-level clones with Git?

  - by Chad Johnson

  So, I'm thinking of having the following centralized setup with Git (each of these are clones): stable development developer1 developer2 developer3 So, I created my stable repository git --bare init made the 'development' clone git clone ssh://host.name//path/to/stable/project.git development and made a 'developer' clone git clone ssh://host.name//path/to/development/project.git developer So, now, I make a change, commit, and then I push from my developer account git commit --all git push and the change goes to the development clone. But now, when I ssh to the server, go to the development clone directory, and run "git fetch" or "get pull", I don't see the changes. So what do I do? Am I totally misunderstanding things and doing things wrong? How can I see the changes in the 'development' clone that I pushed from my 'developer' clone? This worked fine in Mercurial.

  Read the article

• close fails on database connections (managed connection cleanup fails) in websphere 7 but not in web

  - by mete

  I have a simple method (used in a web application through servlets) that gets a connection from a JNDI name and issues a select statement (get connection, issue select, return result, close the connection etc. in finally). Due to other methods in the application the connection is set as autocommit=false. This method works normally in websphere 6.1 as well as in glassfish and weblogic. However, in websphere 7, it receives cleanup failed error when I close the connection because, it says, the connection is still in a transaction. Because I was not updating anything I did not commit or rollback the connection in this method (which can be wrong). If I add commit before closing the connection, it works. My question is why it works in websphere 6.1 (and other containers) and why not in websphere 7 ? What can be the cause of this difference ?

  Read the article

• how can I convert String to SecretKey

  - by Alaa

  I want to convert String to secretKey public void generateCode(String keyStr){ KeyGenerator kgen = KeyGenerator.getInstance("AES"); kgen.init(128); // 192 and 256 bits may not be available // Generate the secret key specs. secretKey skey=keyStr; //How can I make the casting here //SecretKey skey = kgen.generateKey(); byte[] raw = skey.getEncoded(); } I try to use BASE64Decoder instead of secretKey, but I face a porblem which is I cannot specify key length. EDIT: I want to call this function from another place static public String encrypt(String message , String key , int keyLength) throws Exception { // Get the KeyGenerator KeyGenerator kgen = KeyGenerator.getInstance("AES"); kgen.init(keyLength); // 192 and 256 bits may not be available // Generate the secret key specs. //decode the BASE64 coded message SecretKey skey = key; //here is the error raw = skey.getEncoded(); SecretKeySpec skeySpec = new SecretKeySpec(raw, "AES"); // Instantiate the cipher Cipher cipher = Cipher.getInstance("AES"); cipher.init(Cipher.ENCRYPT_MODE, skeySpec); System.out.println("msg is" + message + "\n raw is" + raw); byte[] encrypted = cipher.doFinal(message.getBytes()); String cryptedValue = new String(encrypted); System.out.println("encrypted string: " + cryptedValue); return cryptedValue; } Any one can help, i'll be very thankful.

  Read the article

• Eclipse 3.5 and Ubuntu 9.10, subversion client does not work

  - by Cédric Girard

  Hi, I had installed Eclipse 3.5 Yoxos on my Ubuntu 8.04 for month, and run fine. I had upgraded to 9.10 last week, and the subversion plugin does not work since upgrade. When I try to update or commit, Subversion work for hours without any progress in console or progress bars. I can delete files or add them to SVN, but commands wich involve network just hang. SVN run fine using command line. I have already patched the GDK problem. Since this I can cancel update/commit without crashing Eclipse. Regards Cédric

  Read the article

• Silverlight and WCF Ria Services

  - by Flex_Addicted

  Hi guys, I've created a new Silverlight 3 Business Application with VS 2008. The creation has completed correctly. When I try to open the xaml, it opens but in meanwhile this error is shown: Failed to load metadata assembly System.Windows.Controls.Data.Input.Design, Version=2.0.5.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35. Exception message: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.. Stack Trace: at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark) at System.Reflection.Assembly.GetTypes() at MS.Internal.Package.MetadataLoader.RegisterDesignTimeMetadata(Assembly assembly, LogCallback logger)An exception of type ArgumentNullException was caught when calling IRegisterMetadata on type System.Windows.Controls.Data.Input.VisualStudio.Design.MetadataRegistration. Exception Message: Value cannot be null. Parameter name: type. Stack Trace: at Microsoft.Windows.Design.Metadata.AttributeTableBuilder.AddCallback(Type type, AttributeCallback callback) at System.Windows.Controls.Data.Input.VisualStudio.Design.MetadataRegistration.AddAttributes(AttributeTableBuilder builder) at System.Windows.Controls.Design.Common.MetadataRegistrationBase.BuildAttributeTable() at System.Windows.Controls.Data.Input.VisualStudio.Design.MetadataRegistration.Register() at MS.Internal.Package.MetadataLoader.RegisterDesignTimeMetadata(Assembly assembly, LogCallback logger)Failed to load metadata assembly System.Windows.Controls.Design, Version=2.0.5.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35. Exception message: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.. Stack Trace: at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark) at System.Reflection.Assembly.GetTypes() at MS.Internal.Package.MetadataLoader.RegisterDesignTimeMetadata(Assembly assembly, LogCallback logger)Failed to load metadata assembly System.Windows.Controls.Navigation.Design, Version=2.0.5.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35. Exception message: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.. Stack Trace: at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark) at System.Reflection.Assembly.GetTypes() at MS.Internal.Package.MetadataLoader.RegisterDesignTimeMetadata(Assembly assembly, LogCallback logger) Why? Any solutions? Thank you in advance.

  Read the article

• Update DataBase on clicking in button, after editing gridview (not automatically saving in DB, but a

  - by gaponte69

  0 vote down star I am using GridView in asp .net and editing data with edit command field property (as we know after updating the edited row, we automatically update the database), and I want to use transactions (with begin to commit statement - including rollback) to commit this update query in database, after clicking in some button (after some events for example), not automatically to insert or update the edited data from grid directly to the DB...so I want to save them somewhere temporary (even many edited rows - not just one row) and then to confirm the transaction - to update the real tables in database... Any suggestions are welcomed... I've used some good links, but very helpful, like: http://www.asp.net/learn/data-access/tutorial-63-cs.aspx http://www.asp.net/learn/data-access/tutorial-66-cs.aspx etc... etc...

  Read the article

• Keeping the UI responsive while parsing a very large logfile

  - by Carlos

  I'm writing an app that parses a very large logfile, so that the user can see the contents in a treeview format. I've used a BackGroundWorker to read the file, and as it parses each message, I use a BeginInvoke to get the GUI thread to add a node to my treeview. Unfortunately, there's two issues: The treeview is unresponsive to clicks or scrolls while the file is being parsed. I would like users to be able to examine (ie expand) nodes while the file is parsing, so that they don't have to wait for the whole file to finish parsing. The treeview flickers each time a new node is added. Here's the code inside the form: private void btnChangeDir_Click(object sender, EventArgs e) { OpenFileDialog browser = new OpenFileDialog(); if (browser.ShowDialog() == DialogResult.OK) { tbSearchDir.Text = browser.FileName; BackgroundWorker bgw = new BackgroundWorker(); bgw.DoWork += (ob, evArgs) => ParseFile(tbSearchDir.Text); bgw.RunWorkerAsync(); } } private void ParseFile(string inputfile) { FileStream logFileStream = new FileStream(inputfile, FileMode.Open, FileAccess.Read, FileShare.ReadWrite); StreamReader LogsFile = new StreamReader(logFileStream); while (!LogsFile.EndOfStream) { string Msgtxt = LogsFile.ReadLine(); Message msg = new Message(Msgtxt.Substring(26)); //Reads the text into a class with appropriate members AddTreeViewNode(msg); } } private void AddTreeViewNode(Message msg) { TreeNode newNode = new TreeNode(msg.SeqNum); BeginInvoke(new Action(() => { treeView1.BeginUpdate(); treeView1.Nodes.Add(newNode); treeView1.EndUpdate(); Refresh(); } )); } What needs to be changed?

  Read the article

• Why can't I pipe the output of uuencode to mailx in a single Perl open statement?

  - by CheeseConQueso

  Here's my code that is not working: print "To: "; my $to=<>; chomp $to; print "From: "; my $from=<>; chomp $from; print "Attach: "; my $attach=<>; chomp $attach; print "Subject: "; my $subject=<>; chomp $subject; print "Message: "; my $message=<>; chomp $message; my $mail_fh = \*MAIL; open $mail_fh, "uuencode $attach $attach |mailx -m -s \"$subject\" -r $from $to"; print $mail_fh $message; close($mail_fh); The mailx command works fine off the command line, but not in this Perl script context. Any idea what I'm missing? I suspect that this line's format/syntax: open $mail_fh, "uuencode $attach $attach |mailx -m -s \"$subject\" -r $from $to"; is the culprit.

  Read the article

• JavaEE : "Access to default session denied" when sending mail using smtp.gmail.com

  - by Harry Pham

  I am trying to write email authentication feature for my website and I encounter some issues. I got java.lang.SecurityException: Access to default session denied, when I try to do Session.getDefaultInstance. Here are my codes: private static final String SMTP_HOST_NAME = "smtp.gmail.com"; private static final String SMTP_PORT = "465"; private static final String emailSubjectTxt = "Email Confirmation"; private static final String emailFromAddress = "[email protected]"; private static final String SSL_FACTORY = "javax.net.ssl.SSLSocketFactory"; ... String sendTo = "[email protected]"; boolean debug = true; Properties props = new Properties(); props.put("mail.smtp.host", SMTP_HOST_NAME); props.put("mail.smtp.auth", "true"); props.put("mail.debug", "true"); props.put("mail.smtp.port", SMTP_PORT); props.put("mail.smtp.socketFactory.port", SMTP_PORT); props.put("mail.smtp.socketFactory.class", SSL_FACTORY); props.put("mail.smtp.socketFactory.fallback", "false"); //It dies at the next line Session session = Session.getDefaultInstance(props, new javax.mail.Authenticator() { @Override protected PasswordAuthentication getPasswordAuthentication() { return new PasswordAuthentication("myUserName", "myPassword"); } }); session.setDebug(debug); //Set the FROM address Message msg = new MimeMessage(session); InternetAddress addressFrom = new InternetAddress(emailFromAddress); msg.setFrom(addressFrom); //Set the TO address InternetAddress[] addressTo = new InternetAddress[1]; addressTo[0] = new InternetAddress(sendTo); msg.setRecipients(Message.RecipientType.TO, addressTo); //Construct the content of the email confirmation String message = "Test Content" // Setting the Subject and Content Type msg.setSubject(emailSubjectTxt); msg.setContent(message, "text/plain"); Transport.send(msg);

  Read the article

• How do I read binary C++ protobuf data using Python protobuf?

  - by nbolton

  The Python version of Google protobuf gives us only: SerializeAsString() Where as the C++ version gives us both: SerializeToArray(...) SerializeAsString() We're writing to our C++ file in binary format, and we'd like to keep it this way. That said, is there a way of reading the binary data into Python and parsing it as if it were a string? Is this the correct way of doing it? binary = get_binary_data() binary_size = get_binary_size() string = None for i in range(len(binary_size)): string += i message = new MyMessage() message.ParseFromString(string) Update: Here's a new example, and a problem: message_length = 512 file = open('foobars.bin', 'rb') eof = False while not eof: data = file.read(message_length) eof = not data if not eof: foo_bar = FooBar() foo_bar.ParseFromString(data) When we get to the foo_bar.ParseFromString(data) line, I get this error: Exception Type: DecodeError Exception Value: Too many bytes when decoding varint. Update 2: It turns out, that the padding on the binary data was throwing protobuf off; too many bytes were being sent in, as the message suggests (in this case it was referring to the padding). This padding comes from using the C++ protobuf function, SerializeToArray on a fixed-length buffer. To eliminate this, I have used this temproary code: message_length = 512 file = open('foobars.bin', 'rb') eof = False while not eof: data = file.read(message_length) eof = not data string = '' for i in range(0, len(data)): byte = data[i] if byte != '\xcc': # yuck! string += data[i] if not eof: foo_bar = FooBar() foo_bar.ParseFromString(string) There is a design flaw here I think. I will re-implement my C++ code so that it writes variable length arrays to the binary file. As advised by the protobuf documentation, I will prefix each message with it's binary size so that I know how much to read when I'm opening the file with Python.

  Read the article

• Iterating changes using jQuery?

  - by HipHop-opatamus

  In the HTML below, I would like to copy the "submittedby" beside "message", within the H2 tag: <div class="comment"> <H2 class="threadtitle">Message 1</h2> <span class="submittedby">James</a> </div> <div class="comment"> <H2 class="threadtitle">Message 2</h2> <span class="submittedby">Bill</a> </div> <div class="comment"> <H2 class="threadtitle">Message 3</h2> <div class="submittedby">Phil</a> </div> My current jQuery code is as follows: $(document).ready(function() { $('.submittedby').copy().appendTo('.threadtitle'); }); The problem is this copies EVERY "submittedby" to EVERY "threadtitle". How do I code it so it only copies the "submittedby" from within the same "comment" div? Thanks!

  Read the article

• FMDB transaction

  - by user142764

  Hi ! I use FMDB to wrap SQLite in my app. I haven't found any docs about the use of methods begin, beginUpdates, commit, finalize, etc. I face some problems in my apps which i think are caused by the way i use transactions. Here is what i tried : [FMDB beginUpdates] - My insert statement - [FMDB commit] [FMDB finalize] it crashes with this log : Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[FMDatabase<0xd705a0 finalize]: called when collecting not enabled' Could you please give me an example of how you are using transactions, or point me to a doc ? Thanks in advance, Vincent.

  Read the article

• Help to resolve 'Out of memory' exception when calling DrawImage

  - by Jack Juiceson

  Hi guys, About one percent of our users experience sudden crash while using our application. The logs show below exception, the only thing in common that I've seen so far is that, they all have XP SP3. Thanks in advance Out of memory. at System.Drawing.Graphics.CheckErrorStatus(Int32 status) at System.Drawing.Graphics.DrawImage(Image image, Rectangle destRect, Int32 srcX, Int32 srcY, Int32 srcWidth, Int32 srcHeight, GraphicsUnit srcUnit, ImageAttributes imageAttrs, DrawImageAbort callback, IntPtr callbackData) at System.Drawing.Graphics.DrawImage(Image image, Rectangle destRect, Int32 srcX, Int32 srcY, Int32 srcWidth, Int32 srcHeight, GraphicsUnit srcUnit, ImageAttributes imageAttr, DrawImageAbort callback) at System.Drawing.Graphics.DrawImage(Image image, Rectangle destRect, Int32 srcX, Int32 srcY, Int32 srcWidth, Int32 srcHeight, GraphicsUnit srcUnit, ImageAttributes imageAttr) at System.Windows.Forms.ControlPaint.DrawBackgroundImage(Graphics g, Image backgroundImage, Color backColor, ImageLayout backgroundImageLayout, Rectangle bounds, Rectangle clipRect, Point scrollOffset, RightToLeft rightToLeft) at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle, Color backColor, Point scrollOffset) at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle) at System.Windows.Forms.Control.OnPaintBackground(PaintEventArgs pevent) at System.Windows.Forms.ScrollableControl.OnPaintBackground(PaintEventArgs e) at System.Windows.Forms.Control.PaintTransparentBackground(PaintEventArgs e, Rectangle rectangle, Region transparentRegion) at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle, Color backColor, Point scrollOffset) at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle) at System.Windows.Forms.Control.OnPaintBackground(PaintEventArgs pevent) at System.Windows.Forms.ScrollableControl.OnPaintBackground(PaintEventArgs e) at System.Windows.Forms.Control.PaintTransparentBackground(PaintEventArgs e, Rectangle rectangle, Region transparentRegion) at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle, Color backColor, Point scrollOffset) at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle) at System.Windows.Forms.Control.OnPaintBackground(PaintEventArgs pevent) at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs) at System.Windows.Forms.Control.WmPaint(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) Operation System Information ---------------------------- Name = Windows XP Edition = Home Service Pack = Service Pack 3 Version = 5.1.2600.196608 Bits = 32

  Read the article

• Why does git remember changes, but not let me stage them?

  - by Andres Jaan Tack

  I have a list of modifications when I run git status, but I cannot stage them or commit them. How can I fix this? This occurred after pulling the kernelmode directory from a bare repository somewhere in one huge commit. % git status # On branch master # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: kernelmode/linux-2.6.33/Documentation/IO-mapping.txt # ... $ git add . $ git status # On branch master # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: kernelmode/linux-2.6.33/Documentation/IO-mapping.txt # ...

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >