Search Results

Search found 4724 results on 189 pages for 's unit'.

Page 162/189 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Volatile fields in C#

  - by Danny Chen

  From the specification 10.5.3 Volatile fields: The type of a volatile field must be one of the following: A reference-type. The type byte, sbyte, short, ushort, int, uint, char, float, bool, System.IntPtr, or System.UIntPtr. An enum-type having an enum base type of byte, sbyte, short, ushort, int, or uint. First I want to confirm my understanding is correct: I guess the above types can be volatile because they are stored as a 4-bytes unit in memory(for reference types because of its address), which guarantees the read/write operation is atomic. A double/long/etc type can't be volatile because they are not atomic reading/writing since they are more than 4 bytes in memory. Is my understanding correct? And the second, if the first guess is correct, why a user defined struct with only one int field in it(or something similar, 4 bytes is ok) can't be volatile? Theoretically it's atomic right? Or it's not allowed simply because that all user defined structs(which is possibly more than 4 bytes) are not allowed to volatile by design?

  Read the article

• Stored procedure using cursor in mySql.

  - by RAVI

  I wrote a stored procedure using cursor in mysql but that procedure is taking 10 second to fetch the result while that result set have only 450 records so, I want to know that why that proedure is taking that much time to fetch tha record. procedure as below: DELIMITER // DROP PROCEDURE IF EXISTS curdemo123// CREATE PROCEDURE curdemo123(IN Branchcode int,IN vYear int,IN vMonth int) BEGIN DECLARE EndOfData,tempamount INT DEFAULT 0; DECLARE tempagent_code,tempplantype,tempsaledate CHAR(12); DECLARE tempspot_rate DOUBLE; DECLARE var1,totalrow INT DEFAULT 1; DECLARE cur1 CURSOR FOR select SQL_CALC_FOUND_ROWS ad.agentCode,ad.planType,ad.amount,ad.date from adplan_detailstbl ad where ad.branchCode=Branchcode and (ad.date between '2009-12-1' and '2009-12-31')order by ad.NUM_ID asc; DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET EndOfData = 1; DROP TEMPORARY TABLE IF EXISTS temptable; CREATE TEMPORARY TABLE temptable (agent_code varchar(15), plan_type char(12),sale double,spot_rate double default '0.0', dATE DATE); OPEN cur1; SET totalrow=FOUND_ROWS(); while var1 <= totalrow DO fetch cur1 into tempagent_code,tempplantype,tempamount,tempsaledate; IF((tempplantype='Unit Plan' OR tempplantype='MIP') OR tempplantype='STUP') then select spotRate into tempspot_rate from spot_amount where ((monthCode=vMonth and year=vYear) and ((agentCode=tempagent_code and branchCode=Branchcode) and (planType=tempplantype))); INSERT INTO temptable VALUES(tempagent_code,tempplantype,tempamount,tempspot_rate,tempsaledate); else INSERT INTO temptable(agent_code,plan_type,sale,dATE) VALUES(tempagent_code,tempplantype,tempamount,tempsaledate); END IF; SET var1=var1+1; END WHILE; CLOSE cur1; select * from temptable; DROP TABLE temptable; END // DELIMITER ;

  Read the article

• StructureMap and injecting IEnumerable<T>

  - by GiddyUpHorsey

  I'm new to StructureMap and have some existing code that I'm working with that uses StructureMap 2.5.4. There is a class that is constructed using StructureMap that has a constructor that takes IEnumerable<TCar> as a parameter. The registry has the following code. Scan(x => { x.TheCallingAssembly(); x.WithDefaultConventions(); x.AddAllTypesOf<ICar>(); } ); ForRequestedType<IEnumerable<ICar>>().TheDefault.Is.ConstructedBy( x => ObjectFactory.GetAllInstances<ICar>()); I'm writing a unit test and have obtained a nested container off the ObjectFactory and have injected an instance using the Inject method. One of the instances of ICar should receive the injected type in its constructor. However it wasn't working and I tracked that down to the ObjectFactory.GetAllInstances() call which doesn't use my nested container. How can I get this to work? I also read about StructureMap autowiring arrays and IEnumerable instances but I couldn't get it to work. Is there a better way to rewrite the above registry code so that an instance of IEnumerable<TCar> will be created and use the injected type from my nested container?

  Read the article

• Theory: "Lexical Encoding"

  - by _ande_turner_

  I am using the term "Lexical Encoding" for my lack of a better one. A Word is arguably the fundamental unit of communication as opposed to a Letter. Unicode tries to assign a numeric value to each Letter of all known Alphabets. What is a Letter to one language, is a Glyph to another. Unicode 5.1 assigns more than 100,000 values to these Glyphs currently. Out of the approximately 180,000 Words being used in Modern English, it is said that with a vocabulary of about 2,000 Words, you should be able to converse in general terms. A "Lexical Encoding" would encode each Word not each Letter, and encapsulate them within a Sentence. // An simplified example of a "Lexical Encoding" String sentence = "How are you today?"; int[] sentence = { 93, 22, 14, 330, QUERY }; In this example each Token in the String was encoded as an Integer. The Encoding Scheme here simply assigned an int value based on generalised statistical ranking of word usage, and assigned a constant to the question mark. Ultimately, a Word has both a Spelling & Meaning though. Any "Lexical Encoding" would preserve the meaning and intent of the Sentence as a whole, and not be language specific. An English sentence would be encoded into "...language-neutral atomic elements of meaning ..." which could then be reconstituted into any language with a structured Syntactic Form and Grammatical Structure. What are other examples of "Lexical Encoding" techniques? If you were interested in where the word-usage statistics come from : http://www.wordcount.org

  Read the article

• Single Responsibility Principle vs Anemic Domain Model anti-pattern

  - by Niall Connaughton

  I'm in a project that takes the Single Responsibility Principle pretty seriously. We have a lot of small classes and things are quite simple. However, we have an anemic domain model - there is no behaviour in any of our model classes, they are just property bags. This isn't a complaint about our design - it actually seems to work quite well During design reviews, SRP is brought out whenever new behaviour is added to the system, and so new behaviour typically ends up in a new class. This keeps things very easily unit testable, but I am perplexed sometimes because it feels like pulling behaviour out of the place where it's relevant. I'm trying to improve my understanding of how to apply SRP properly. It seems to me that SRP is in opposition to adding business modelling behaviour that shares the same context to one object, because the object inevitably ends up either doing more than one related thing, or doing one thing but knowing multiple business rules that change the shape of its outputs. If that is so, then it feels like the end result is an Anemic Domain Model, which is certainly the case in our project. Yet the Anemic Domain Model is an anti-pattern. Can these two ideas coexist? EDIT: A couple of context related links: SRP - http://www.objectmentor.com/resources/articles/srp.pdf Anemic Domain Model - http://martinfowler.com/bliki/AnemicDomainModel.html I'm not the kind of developer who just likes to find a prophet and follow what they say as gospel. So I don't provide links to these as a way of stating "these are the rules", just as a source of definition of the two concepts.

  Read the article

• Why the composite component fails to parent controls?

  - by lyborko

  Hi, I created my own Component : TPage , which Contains Subcomponent TPaper (TPanel). The problem is, that when I put controls such as TMemo or TButton on the TPaper (which fills up nearly whole area), the controls do not load at all. see example below TPaper = class(TPanel) protected constructor Create(AOwner: TComponent);override; destructor Destroy;override; public procedure Paint; override; end; TPage = class(TCustomControl) private FPaper:TPaper; protected procedure CreateParams(var Params:TCreateParams); override; public constructor Create(AOwner: TComponent);override; destructor Destroy;override; published property Paper: TPaper read FPaper write FPaper; end; constructor TPage.Create(AOwner: TComponent); begin inherited Create(AOwner); PaperOrientation:=poPortrait; PaperSize:=psA4; PaperBrush:=TBrush.Create; PaperBrush.Color:=clWhite; PDFDocument:=Nil; FPaper:=TPaper.Create(Self); FPaper.Parent:=Self; FPaper.SetSubComponent(True); end; ... Memo1 is parented in TPaper (TPanel) at design-time, but after pressing "Run" it does not exist. procedure TForm1.btn1Click(Sender: TObject); begin if not Assigned(Memo1) then ShowMessage('I do not exist'); //Memo1 is nil end; Have you any idea what's wrong? Thanks a lot P.S Delphi 7 When I put TMemo inside TPaper and save the unit (Unit1), after inspection of associated dfm file, there is no trace of TMemo component. (Thats why it can not load to app.)

  Read the article

• Where in maven project's path should I put configuration files that are not considered resources

  - by Paralife

  I have a simple java maven project. One of my classes when executing needs to load an xml configuration file from the classpath. I dont want to package such xml file when producing the jar but I want to include a default xml file in a zip assemply under a conf subfolder and I also want this default xml to be available in the unit tests to test against it. As I see it there are 2 possible places of this default xml: src/main/resources/conf/default.xml src/main/conf/default.xml Both solutions demand special pom actions: In solution 1, I get the auto copy to target folder during build which means it is available in testing but I also get it in the produced jar which i dont want. In solution 2, I get the jar as I want it(free of the xml) but I manually have to copy the xml to the target folder to be available for testing. (I dont want to add src's subfolders in test classpath. I think it is bad practice). The question is what is the best solution of the two? If the correct is 2, what is the best way to copy it to target folder? Is there any other solution better and more common than those two? (I also read http://stackoverflow.com/questions/465001/where-should-i-put-application-configuration-files-for-a-maven-project but I would like to know the most "correct solution" from the "convention over configuration" point of view and this link provides some configuration type solutions but not any convention oriented. Maybe there isnt one but I ask anyway. Also the solutions provided include AntRun plugin and appAssembler plugin and I wonder if I could do it with out them.)

  Read the article

• Git Workflow With Capistrano

  - by jerhinesmith

  I'm trying to get my head around a good git workflow using capistrano. I've found a few good articles, but I'm either not grasping completely what they're suggesting (likely) or they're somewhat lacking. Here's kind of what I had in mind so far, but I get caught up when to merge back into the master branch (i.e. before moving to stage? after?) and trying to hook it into capistrano for deployments: Make sure you’re up to date with all the changes made on the remote master branch by other developers git checkout master git pull Create a new branch that pertains to the particular bug you're trying to fix git checkout -b bug-fix-branch Make your changes git status git add . git commit -m "Friendly message about the commit" So, this is usually where I get stuck. At this point, I have a master branch that is healthy and a new bug-fix-branch that contains my (untested -- other than unit tests) changes. If I want to push my changes to stage (through cap staging deploy), do I have to merge my changes back into the master branch (I'd prefer not to since it seems like master should be kept free of untested code)? Do I even deploy from master (or should I be tagging a release first and then modifying my production.rb file to deploy from that tag)? git-deployment seems to address some of these workflow issues, but I can't seem to find out how on earth it actually hooks into cap staging deploy and cap production deploy. Thoughts? I assume there's a likely canonical way to do this, but I either can't find it or I'm too new to git to recognize that I have found it. Help!

  Read the article

• JUnit: checking if a void method gets called

  - by nkr1pt

  I have a very simple filewatcher class which checks every 2 seconds if a file has changed and if so, the onChange method (void) is called. Is there an easy way to check ik the onChange method is getting called in a unit test? code: public class PropertyFileWatcher extends TimerTask { private long timeStamp; private File file; public PropertyFileWatcher(File file) { this.file = file; this.timeStamp = file.lastModified(); } public final void run() { long timeStamp = file.lastModified(); if (this.timeStamp != timeStamp) { this.timeStamp = timeStamp; onChange(file); } } protected void onChange(File file) { System.out.println("Property file has changed"); } } @Test public void testPropertyFileWatcher() throws Exception { File file = new File("testfile"); file.createNewFile(); PropertyFileWatcher propertyFileWatcher = new PropertyFileWatcher(file); Timer timer = new Timer(); timer.schedule(propertyFileWatcher, 2000); FileWriter fw = new FileWriter(file); fw.write("blah"); fw.close(); Thread.sleep(8000); // check if propertyFileWatcher.onChange was called file.delete(); }

  Read the article

• With NHibernate and Transaction do I rollback on commit failure or does it auto rollback on single c

  - by mattcodes

  I've built the following Dispose method for my Unit Of Work which essentially wraps the active NH session & transaction (transaction set as variable after opening session as to not be replaced if NH session gets new transaction after error) public void Dispose() { Func<ITransaction,bool> transactionStateOkayFunc = trans => trans != null && trans.IsActive && !trans.WasRolledBack; try { if(transactionStateOkayFunc(this.transaction)) { if (HasErrored) { transaction.Rollback(); } else { try { transaction.Commit(); } catch (Exception) { if(transactionStateOkayFunc(transaction)) transaction.Rollback(); throw; } } } } finally { if(transaction != null) transaction.Dispose(); if(session.IsOpen) session.Close(); } I can't help feeling that code is a little bloated, will a transaction automatically rollback is a discrete Commit fails in the case of non-nested transactions? Will Commit or Rollback automatically Dipose the transaction? If not will Session.Close() automatically dispose the associated transaction?

  Read the article

• Linq is returning too many results when joined

  - by KallDrexx

  In my schema I have two database tables. relationships and relationship_memberships. I am attempting to retrieve all the entries from the relationship table that have a specific member in it, thus having to join it with the relationship_memberships table. I have the following method in my business object: public IList<DBMappings.relationships> GetRelationshipsByObjectId(int objId) { var results = from r in _context.Repository<DBMappings.relationships>() join m in _context.Repository<DBMappings.relationship_memberships>() on r.rel_id equals m.rel_id where m.obj_id == objId select r; return results.ToList<DBMappings.relationships>(); } _Context is my generic repository using code based on the code outlined here. The problem is I have 3 records in the relationships table, and 3 records in the memberships table, each membership tied to a different relationship. 2 membership records have an obj_id value of 2 and the other is 3. I am trying to retrieve a list of all relationships related to object #2. When this linq runs, _context.Repository<DBMappings.relationships>() returns the correct 3 records and _context.Repository<DBMappings.relationship_memberships>() returns 3 records. However, when the results.ToList() executes, the resulting list has 2 issues: 1) The resulting list contains 6 records, all of type DBMappings.relationships(). Upon further inspection there are 2 for each real relationship record, both are an exact copy of each other. 2) All relationships are returned, even if m.obj_id == 3, even though objId variable is correctly passed in as 2. Can anyone see what's going on because I've spent 2 days looking at this code and I am unable to understand what is wrong. I have joins in other linq queries that seem to be working great, and my unit tests show that they are still working, so I must be doing something wrong with this. It seems like I need an extra pair of eyes on this one :)

  Read the article

• Group variables in a boxplot in R

  - by tao.hong

  I am trying to generate a boxplot whose data come from two scenarios. In the plot, I would like to group boxes by their names (So there will be two boxes per variable). I know ggplot would be a good choice. But I got errors which I could not figure out. Can anyone give me some suggestions? sensitivity_out1 structure(c(0.0522902104339716, 0.0521369824334004, 0.0520240345973737, 0.0519818337359876, 0.051935071418996, 0.0519089404325544, 0.000392698277338341, 0.000326135474295325, 0.000280863338343747, 0.000259631566041935, 0.000246594043996332, 0.000237923540393391, 0.00046732650331544, 0.000474448907808135, 0.000478287273678457, 0.000480194683464109, 0.000480631753078668, 0.000481760272726273, 0.000947965771207979, 0.000944821699830455, 0.000939631071343889, 0.000937186900570605, 0.000936007346568281, 0.000934756220144141, 0.00132442589501872, 0.00132658367774979, 0.00133334696220742, 0.00133622384928092, 0.0013381577476241, 0.00134005741746304, 0.0991622968751298, 0.100791399440082, 0.101946808417405, 0.102524244727408, 0.102920085260477, 0.103232984259916, 0.0305219507186844, 0.0304635269233494, 0.0304161055015213, 0.0303742106794513, 0.0303381888169022, 0.0302996157711171, 1.94268588634518e-05, 2.23991225564447e-05, 2.5756135487907e-05, 2.79997917298194e-05, 3.00753967077715e-05, 3.16270817369878e-05, 0.544701146678523, 0.542887331601984, 0.541632986366816, 0.541005610554556, 0.540617004208336, 0.540315690692195, 0.000453386694666078, 0.000448473414508756, 0.00044692043197248, 0.000444826296854332, 0.000445747996014684, 0.000444764303682453, 0.000127569551159321, 0.000128422491392669, 0.00012933662856487, 0.000129941842982939, 0.000129578971489026, 0.000131113075233758, 0.00684610571790029, 0.00686349387897349, 0.00687468164010565, 0.00687880720347743, 0.00688275579317197, 0.00687822247621936), .Dim = c(6L, 12L)) out2 structure(c(0.0189965816735366, 0.0189995096225103, 0.0190099362589894, 0.0190033523148514, 0.01900896721937, 0.0190099427513381, 0.00192043989797585, 0.00207303208721059, 0.00225931163225165, 0.0024049969048389, 0.00252310364086785, 0.00262940166568126, 0.00195164921633517, 0.00190079923515755, 0.00186139563778548, 0.00184188171395076, 0.00183248544676564, 0.00182492970673969, 1.83038731485927e-05, 1.98252671720347e-05, 2.14794764479231e-05, 2.30713122969332e-05, 2.4484220713564e-05, 2.55958833705284e-05, 0.0428066864455102, 0.0431686808647809, 0.0434411033615353, 0.0435883377765726, 0.0436690169266633, 0.0437340464360965, 0.145288252474567, 0.141488776430307, 0.138204532539654, 0.136281799717717, 0.134864952272761, 0.133738386148036, 0.0711728636959696, 0.072031388688795, 0.0727536853228245, 0.0731581966147734, 0.0734424337399303, 0.0736637270702609, 0.000605277151497094, 0.000617268349064968, 0.000632975679951382, 0.000643904422677427, 0.000653775268094148, 0.000662225067910141, 0.26735354610469, 0.267515415990146, 0.26753155165617, 0.267553498616325, 0.267532284594615, 0.267510330320289, 0.000334158771646756, 0.000319032383145857, 0.000306074699839994, 0.000299153278494114, 0.000293956197852583, 0.000290171804454218, 0.000645975219899115, 0.000637548672578787, 0.000632375486965757, 0.000629579821884212, 0.000624956458229123, 0.000622456283217054, 0.0645188290106884, 0.0651539609630352, 0.0656417364889907, 0.0658996698322889, 0.0660715073023965, 0.0662034341510152), .Dim = c(6L, 12L)) Melt data: group variable value 1 1 PLDKRT 0 2 1 PLDKRT 0 3 1 PLDKRT 0 4 1 PLDKRT 0 5 1 PLDKRT 0 6 1 PLDKRT 0 Code: #Data_source 1 sensitivity_1=rbind(sensitivity_out1,sensitivity_out2) sensitivity_1=data.frame(sensitivity_1) colnames(sensitivity_1)=main_l #variable names sensitivity_1$group=1 #Data_source 2 sensitivity_2=rbind(sensitivity_out1[3:4,],sensitivity_out2[3:4,]) sensitivity_2=data.frame(sensitivity_2) colnames(sensitivity_2)=main_l sensitivity_2$group=2 sensitivity_pool=rbind(sensitivity_1,sensitivity_2) sensitivity_pool_m=melt(sensitivity_pool,id.vars="group") ggplot(data = sensitivity_pool_m, aes(x = variable, y = value)) + geom_boxplot(aes( fill= group), width = 0.8) Error: "Error in unit(tic_pos.c, "mm") : 'x' and 'units' must have length > 0" Update Figure out the error. I should use geom_boxplot(aes( fill= factor(group)), width = 0.8) rather than fill= group

  Read the article

• VS 2008 C++ build output?

  - by STingRaySC

  Why when I watch the build output from a VC++ project in VS do I see: 1Compiling... 1a.cpp 1b.cpp 1c.cpp 1d.cpp 1e.cpp [etc...] 1Generating code... 1x.cpp 1y.cpp [etc...] The output looks as though several compilation units are being handled before any code is generated. Is this really going on? I'm trying to improve build times, and by using pre-compiled headers, I've gotten great speedups for each ".cpp" file, but there is a relatively long pause during the "Generating Code..." message. I do not have "Whole Program Optimization" nor "Link Time Code Generation" turned on. If this is the case, then why? Why doesn't VC++ compile each ".cpp" individually (which would include the code generation phase)? If this isn't just an illusion of the output, is there cross-compilation-unit optimization potentially going on here? There don't appear to be any compiler options to control that behavior (I know about WPO and LTCG, as mentioned above). EDIT: The build log just shows the ".obj" files in the output directory, one per line. There is no indication of "Compiling..." vs. "Generating code..." steps. EDIT: I have confirmed that this behavior has nothing to do with the "maximum number of parallel project builds" setting in Tools - Options - Projects and Solutions - Build and Run. Nor is it related to the MSBuild project build output verbosity setting. Indeed if I cancel the build before the "Generating code..." step, the ".obj" files will not exist for the most recent set of "compiled" files. E.g., if I cancel the build during "c.cpp" above, I will see only "a.obj" and "b.obj".

  Read the article

• GWT Animation final value is not respected

  - by brad

  I have a FlowPanel that I'm trying to animate back and forth like an iphone nav. (See this post for my original question on how to do this) So I have it "working" with the code shown below. I say working in quotes because I'm finding that my final position of my scroller is not precise and always changes when scrolling. The GWT.log always says the actual values I'm looking for, so for instance with the call below to scrollTo, my GWT.log says: ScrollStart: 0 scrollStop: -246 But when I actually analyze the element in fireBug, its css, left position is never exactly -246px. Sometimes it's off by as much as 10px so my panel has just stopped scrolling before being finished. The worst part is that this nav animates back and forth, so subsequent clicks can really throw it off, and I need pixel perfect positioning otherwise the whole things looks off. I don't even know where to start with debugging this other than what I've already done. Any tips are appreciated. Code to call animation scroller = new Scroller(); scroller.scrollTo(-246,400); Animation Code public class Scroller extends Animation { private FlowPanel scroller; private final Element e; public Scroller(){ scroller = new FlowPanel(); e = scroller.getElement(); } public void scrollTo(int position, int milliseconds) { scrollStart = e.getOffsetLeft(); scrollStop = position; GWT.log("ScrollStart: " + scrollStart + " scrollStop: " + scrollStop); run(milliseconds); } @Override protected void onUpdate(double progress) { double position = scrollStart + (progress * (scrollStop - scrollStart)); e.getStyle().setLeft(position, Style.Unit.PX); } }

  Read the article

• java and threads: very strange behaviour

  - by Derk

  private synchronized Map<Team, StandingRow> calculateStanding() { System.out.println("Calculate standing for group " + getName()); Map<Team, StandingRow> standing = new LinkedHashMap<Team, StandingRow>(); for (Team team : teams) { standing.put(team, new StandingRow(team)); } StandingRow homeTeamRow, awayTeamRow; for (Match match : matches.values()) { homeTeamRow = standing.get(match.getHomeTeam()); awayTeamRow = standing.get(match.getAwayTeam()); System.out.println("Contains key for " + match.getHomeTeam() + ": " + standing.containsKey(match.getHomeTeam())); System.out.println("Contains key for " + match.getAwayTeam() + ": " + standing.containsKey(match.getAwayTeam())); } } This is my code. matches contains 6 elements, but the problem is that after two matches no keys are anymore found in the standing map. The output is for example Contains key for Zuid-Afrika: true Contains key for Mexico: true Contains key for Uruguay: true Contains key for Frankrijk: true Contains key for Zuid-Afrika: false Contains key for Uruguay: false Contains key for Frankrijk: false Contains key for Mexico: false Contains key for Mexico: false Contains key for Uruguay: false Contains key for Frankrijk: false Contains key for Zuid-Afrika: false This is in a threaded environment, but the method is synchronized so I thought that this would not give a problem? I have also a simple unit test for this method and that works well.

  Read the article

• Find Control inside Grid Row

  - by arpan911

  i m using parent child grid and on child grid i m doing Show / hide threw java script. and child grid i bind run time with Templatecolumns like GridView NewDg = new GridView(); NewDg.ID = "dgdStoreWiseMenuStock"; TemplateField TOTAL = new TemplateField(); TOTAL.HeaderTemplate = new BusinessLogic.GridViewTemplateTextBox(ListItemType.Header, "TOTAL",e.Row.RowIndex ); TOTAL.HeaderStyle.Width = Unit.Percentage(5.00); TOTAL.ItemTemplate = new BusinessLogic.GridViewTemplateTextBox(ListItemType.Item, "TOTAL", e.Row.RowIndex); NewDg.Columns.Add(TOTAL); NewDg.DataSource = ds; NewDg.DataBind(); NewDg.Columns[1].Visible = false; NewDg.Columns[2].Visible = false; System.IO.StringWriter sw = new System.IO.StringWriter(); System.Web.UI.HtmlTextWriter htw = new System.Web.UI.HtmlTextWriter(sw); NewDg.RenderControl(htw); Now I have one TextBox inside Grid named "TOTAL" I want to Find This TextBox and wanna get its value. How can Get it ?

  Read the article

• .NET Web Service hydrate custom class

  - by row1

  I am consuming an external C# Web Service method which returns a simple calculation result object like this: [Serializable] public class CalculationResult { public string Name { get; set; } public string Unit { get; set; } public decimal? Value { get; set; } } When I add a Web Reference to this service in my ASP .NET project Visual Studio is kind enough to generate a matching class so I can easily consume and work with it. I am using Castle Windsor and I may want to plug in other method of getting a calculation result object, so I want a common class CalculationResult (or ICalculationResult) in my solution which all my objects can work with, this will always match the object returned from the external Web Service 1:1. Is there anyway I can tell my Web Service client to hydrate a particular class instead of its generated one? I would rather not do it manually: foreach(var fromService in calcuationResultsFromService) { ICalculationResult calculationResult = new CalculationResult() { Name = fromService.Name }; yield return calculationResult; } Edit: I am happy to use a Service Reference type instead of the older Web Reference.

  Read the article

• Verify an event was raised by mocked object

  - by joblot

  In my unit test how can I verify that an event is raised by the mocked object. I have a View(UI) -- ViewModel -- DataProvider -- ServiceProxy. ServiceProxy makes async call to serivce operation. When async operation is complete a method on DataProvider is called (callback method is passed as a method parameter). The callback method then raise and event which ViewModel is listening to. For ViewModel test I mock DataProvider and verify that handler exists for event raised by DataProvider. When testing DataProvider I mock ServiceProxy, but how can I test that callback method is called and event is raised. I am using RhinoMock 3.5 and AAA syntax Thanks -- DataProvider -- public partial class DataProvider { public event EventHandler<EntityEventArgs<ProductDefinition>> GetProductDefinitionCompleted; public void GetProductDefinition() { var service = IoC.Resolve<IServiceProxy>(); service.GetProductDefinitionAsync(GetProductDefinitionAsyncCallback); } private void GetProductDefinitionAsyncCallback(ProductDefinition productDefinition, ServiceError error) { OnGetProductDefinitionCompleted(this, new EntityEventArgs<ProductDefinition>(productDefinition, error)); } protected void OnGetProductDefinitionCompleted(object sender, EntityEventArgs<ProductDefinition> e) { if (GetProductDefinitionCompleted != null) GetProductDefinitionCompleted(sender, e); } } -- ServiceProxy -- public class ServiceProxy : ClientBase<IService>, IServiceProxy { public void GetProductDefinitionAsync(Action<ProductDefinition, ServiceError> callback) { Channel.BeginGetProductDefinition(EndGetProductDefinition, callback); } private void EndGetProductDefinition(IAsyncResult result) { Action<ProductDefinition, ServiceError> callback = result.AsyncState as Action<ProductDefinition, ServiceError>; ServiceError error; ProductDefinition results = Channel.EndGetProductDefinition(out error, result); if (callback != null) callback(results, error); } }

  Read the article

• Thoughts on GoGrid vs EC2

  - by Jason

  I am currently hosting my SaaS application at GoGrid (Microsoft stack). Here's what I have: Database Server - physical box, 12 GB RAM, 2 X Quad Core CPU (2.13 GHz Xeon E5506) 2 Web / App servers - cloud servers, 2 GB RAM, 2 VCPUs 300 GB monthly bandwidth I am paying around $900 / month for this. My web / app servers are busting at the seams and need to be upgraded to 4 GB of RAM. I also need a firewall, and GoGrid just added this service for an additional $200. After the upgrade, I will be paying around $1,400. I started looking at Amazon EC2, specifically this config: Database server - "High Memory Double Extra Large Instance" - 34 GB RAM, 13 EC2 compute units 2 Web / App servers - "Large Instance" - 7.5 GB RAM, 4 EC2 compute units If I go with 1 year reserved instances, my upfront cost would be $4,500 and my monthly would be $700. This comes to $1,075 / month when amortized. Amazon also includes a firewall for free. Here are my questions: Do any of you have experience running a database (especially SQL Server) on an EC2 instance? How did it perform compared to a dedicated machine? One of my major concerns is with disk I/O. Amazon's description of a compute unit is fairly vague. Any ideas on how the CPU performance on the database servers would compare? I am hoping that the Amazon solution will provide significantly better performance than my current or even improved GoGrid setup. Having a virtual database server would also be nice in terms of availability. Right now I would be in serious trouble if I had any hardware issues. Thanks for any insight...

  Read the article

• Why do bind1st and bind2nd require constant function objects?

  - by rlbond

  So, I was writing a C++ program which would allow me to take control of the entire world. I was all done writing the final translation unit, but I got an error: error C3848: expression having type 'const `anonymous-namespace'::ElementAccumulator<T,BinaryFunction>' would lose some const-volatile qualifiers in order to call 'void `anonymous-namespace'::ElementAccumulator<T,BinaryFunction>::operator ()(const point::Point &,const int &)' with [ T=SideCounter, BinaryFunction=std::plus<int> ] c:\program files (x86)\microsoft visual studio 9.0\vc\include\functional(324) : while compiling class template member function 'void std::binder2nd<_Fn2>::operator ()(point::Point &) const' with [ _Fn2=`anonymous-namespace'::ElementAccumulator<SideCounter,std::plus<int>> ] c:\users\****\documents\visual studio 2008\projects\TAKE_OVER_THE_WORLD\grid_divider.cpp(361) : see reference to class template instantiation 'std::binder2nd<_Fn2>' being compiled with [ _Fn2=`anonymous-namespace'::ElementAccumulator<SideCounter,std::plus<int>> ] I looked in the specifications of binder2nd and there it was: it took a const AdaptibleBinaryFunction. So, not a big deal, I thought. I just used boost::bind instead, right? Wrong! Now my take-over-the-world program takes too long to compile (bind is used inside a template which is instantiated quite a lot)! At this rate, my nemesis is going to take over the world first! I can't let that happen -- he uses Java! So can someone tell me why this design decision was made? It seems like an odd decision. I guess I'll have to make some of the elements of my class mutable for now...

  Read the article

• convert list of relative widths to pixel widths

  - by mkoryak

  This is a code review question more then anything. I have the following problem: Given a list of relative widths (no unit whatsoever, just all relative to each other), generate a list of pixel widths so that these pixel widths have the same proportions as the original list. input: list of proportions, total pixel width. output: list of pixel widths, where each width is an int, and the sum of these equals the total width. Code: var sizes = "1,2,3,5,7,10".split(","); //initial proportions var totalWidth = 1024; // total pixel width var sizesTotal = 0; for (var i = 0; i < sizes.length; i++) { sizesTotal += parseInt(sizes[i], 10); } if(sizesTotal != 100){ var totalLeft = 100;; for (var i = 0; i < sizes.length; i++) { sizes[i] = Math.floor(parseInt(sizes[i], 10) / sizesTotal * 100); totalLeft -= sizes[i]; } sizes[sizes.lengh - 1] = totalLeft; } totalLeft = totalWidth; for (var i = 0; i < sizes.length; i++) { widths[i] = Math.floor(totalWidth / 100 * sizes[i]) totalLeft -= widths[i]; } widths[sizes.lenght - 1] = totalLeft; //return widths which contains a list of INT pixel sizes

  Read the article

• Google Analytics Script inside XML File

  - by mnml

  Hi, I would like to know If I can add my ecommerce analytics tags inside an xml formated file? <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-XXXXX-X']); _gaq.push(['_trackPageview']); _gaq.push(['_addTrans', '1234', // order ID - required 'Acme Clothing', // affiliation or store name '11.99', // total - required '1.29', // tax '5', // shipping 'San Jose', // city 'California', // state or province 'USA' // country ]); // add item might be called for every item in the shopping cart // where your ecommerce engine loops through each item in the cart and // prints out _addItem for each _gaq.push(['_addItem', '1234', // order ID - required 'DD44', // SKU/code 'T-Shirt', // product name 'Green Medium', // category or variation '11.99', // unit price - required '1' // quantity - required ]); _gaq.push(['_trackTrans']); //submits transaction to the Analytics servers (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(ga); })(); </script>

  Read the article

• Looking for all-in-one drm/installer/CD creation kit.

  - by user30997

  The company I work for has a download manager in place that handles distribution, DRM, installation of our products - when a user gets them off our website. However, we're using an clunky system for packaging and protecting our products when we do press releases or make retail CDs. Part of the antiquation problem is the fact that the automated system that works with the installer- and DRM-creation software we have is a disaster that needs to be put out of my misery. The list of products that we currently produce, that I would like a new system MUST be capable of producing: Retail CDs, with a certain level of obfuscation to make copying difficult. Downloadable installers that time out after a few hours of use of the product. After the time has expired, removing and reinstalling the product will leave you still blocked from use. Installers that will fail to work after a certain date. I'd love to be able to just feed a tool the directory where a complete product resides and have the installer generated with a couple command-line operations. (The command-line issue is non-negotiable this well be called by an automated tool.) A single-solution package would be far preferable. Software with royalty-based or per-unit based licensing is not an option.

  Read the article

• G++ Multi-platform memory leak detection tool

  - by indyK1ng

  Does anyone know where I can find a memory memory leak detection tool for C++ which can be either run in a command line or as an Eclipse plug-in in Windows and Linux. I would like it to be easy to use. Preferably one that doesn't overwrite new(), delete(), malloc() or free(). Something like GDB if its gonna be in the command line, but I don't remember that being used for detecting memory leaks. If there is a unit testing framework which does this automatically, that would be great. This question is similar to other questions (such as http://stackoverflow.com/questions/283726/memory-leak-detection-under-windows-for-gnu-c-c ) however I feel it is different because those ask for windows specific solutions or have solutions which I would rather avoid. I feel I am looking for something a bit more specific here. Suggestions don't have to fulfill all requirements, but as many as possible would be nice. Thanks. EDIT: Since this has come up, by "overwrite" I mean anything which requires me to #include a library or which otherwise changes how C++ compiles my code, if it does this at run time so that running the code in a different environment won't affect anything that would be great. Also, unfortunately, I don't have a Mac, so any suggestions for that are unhelpful, but thank you for trying. My desktop runs Windows (I have Linux installed but my dual monitors don't work with it) and I'd rather not run Linux in a VM, although that is certainly an option. My laptop runs Linux, so I can use that tool on there, although I would definitely prefer sticking to my desktop as the screen space is excellent for keeping all of the design documentation and requirements in view without having to move too much around on the desktop. NOTE: While I may try answers, I won't mark one as accepted until I have tried the suggestion and it is satisfactory. EDIT2: I'm not worried about the cross-platform compatibility of my code, it's a command line application using just the C++ libraries.

  Read the article

• get Random in ArrayList has error of java.lang.IllegalArgumentException: n must be positive

  - by gabrielle fregil

  In my ArrayList, i have get a random Item from my ArrayList for the equip method. Whenever i use my tester, the terminal window prints java.lang.IllegalArgumentException: n must be positive when I try to call random for the size. I tried to change the value of totalElements to the integer size of the elements, then the error would be an OutOfBoundsExeption import java.util.*; import java.util.Scanner; import java.util.Random; public class GameMaster { private int turn, totalElements; private boolean winner; private Avatar x1; private Avatar x2; private ArrayList<Item> inventory; public GameMaster(Avatar a1, Avatar a2) { x2 = a1; x1 = a2; turn = 1; winner = false; inventory = new ArrayList<Item>(); totalElements = 0; } private void fillInventory() { inventory.add( new Item( "Zealot Blades", true, 8 ) ); inventory.add( new Item( "BFG", true, 13 ) ); inventory.add( new Item( "Synthetic Cloth", false, 7 ) ); // more items inventory.add( new Item( "Gauss Rifle", true, 9 ) ); inventory.add( new Item( "Flight Unit", false, 6 ) ); totalElements = inventory.size(); } public String equip() { Avatar w; String a; if (turn%2==1) w=x2; else w=x1; if (w.beltIsFull()) { a = w.getName() + "'s belt is full. \n"; } else { turn++; Random generator = new Random(); Item rand = inventory.get(generator.nextInt(totalElements)); //terminal window in blueJ: java.lang.IllegalArgumentException: n must be positive a = w.getName()+" is equiped with "+rand.getName()+"."; } return a; }

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >