google api java client - Page 1625

Apache mod_remoteip and access logs

- by GioMac

Since Apache 2.4 I've started using mod_remoteip instead of mod_extract_forwarded for rewriting client address from x-forwarded-for provided by frontend servers (varnish, squid, apache etc). So far everything works fine with the modules, i.e. php, cgi, wsgi etc... - client addresses are shown as they should be, but I couldn't write client address in access logs (%a, %h, %{c}a). No luck - I'm always getting 127.0.0.1 (localhost forward ex.). How to log client's ip address when using mod_remoteip?

Read the article

Server-side SSH jump hosts

- by Dan Sosedoff

Trying to figure out server side SSH jump hosts logic. Current network schema: [Client] <--> [Server A: hostname: a.com] <--> [Server B] [Client] <--> [Server A: hostname: b.com] <--> [Server C] Server A responds to both DNS records. Possible flow: Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically jump user onto Server B with ssh user2@server_b.com. Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically just user onto Server C with ssh user2@server_c.com. In other words, client should be able to connect to the target without performing any local configuration, assuming that we have a stock ssh config. The problem with ssh jumps is that user has to define hosts in local ~/.ssh/config file, which is not acceptable in my case. It needs to be a default sshd behavior. Im aware that you can define a custom command ~/.ssh/authorized_keys on server, but i dont think there is a way to properly detect source hostname where user tries to connect. It is possible at all ?

Read the article

Email bounce back 550 5.1.1 recipient rejected

- by Stan

A client recently switched to Exchange Server / Outlook for their email. Since then emails from my company to any email address at their company bounce back from the System Administrator with this error: Your message did not reach some or all of the intended recipients. Subject: Email Solution Sent: 12/12/2012 11:08 AM The following recipient(s) cannot be reached: '[email protected]' on 12/12/2012 11:08 AM 550 5.1.1 <[email protected]> recipient rejected Looking in the Message Options of the bounce back email shows no data in the Internet Header field. My client's IT guy says we're not being blocked, but I cant think of any other reason the bounce would occur. Any suggestions on what questions to ask or how to fix this would be helpful. I'm using a desktop version of Outlook 2007 and connecting through my ISP. Thanks.

Read the article

backuppc - how to backup remote (over the internet) clients?

- by Scott

I am testing out backuppc, which works great so far backing up windows clients on a LAN via SMB (no backup client/agent required). However I have quite a few laptops and desktops that are in various remote locations - some of which move around. I need some way to have that remote computer create an outgoing connection for backup purposes (Windows XP/7). I know backuppc supports smb, rsync and 'tar', but I believe these are all connections going from the server TO the client. SO, I either need a way to vpn the client on a timed basis, or it would be a lot better if the client could some how connect to the server (ssh?) and initiate it's own backup somehow (rsync?). Of course this all needs to be pre-installed by me and require no maintenance by the end user, no dialogs on their side. What do you think?

Read the article

Can I use a wildcard to denote subdirectories as opposed to just files in the Windows Command Prompt

- by Dinosaurus

I know I can use a wildcard to list the files in a single directory: dir *.java However, does anyone know if it is possible to denote a subdirectory with a wildcard as well? I would like to do something like dir classes/*/*.java Where, it will list all the java files in every subdirectory beneath the classes directory. So, if there is: classes/cs1100/ classes/cs1200/ classes/cs1500/ It will list all the java files within these. Note, I'm not using this specifically for the "Dir" command, but instead another command line tool that accepts a list of files. But, if it works for Dir, it shoudl work in my other program as well.

Read the article

Trying to Set up SMTP Server on WIndows Server 2012

- by datc

I'm working on a website, and I need to test the functionality of sending email messages from ASP.NET, something like this: Dim msg As New MailMessage("email1", "email2") msg.Subject = "Subject" msg.IsBodyHtml = True msg.Body = "Click <a href='site'>here</a>." Dim client As SmtpClient = New SmtpClient() client.Host = "My-Server" client.Port = 25 client.DeliveryMethod = SmtpDeliveryMethod.Network client.Send(msg) This is running from a Windows 8 workstation. I've installed SMTP server on my Windows Server 2012 machine. The mail shows up in the mailroot/Queue folder and sits there, eventually getting deposited into Badmail. Now I have AT&T U-verse at home, and a few devices connected to the gateway, including let's call it "My-Server." When I run SmtpDiag from say, datc@... to [email protected] I get SOA serial number match passed, Local DNS (99-135-60-233.lightspeed.bcvloh.sbcglobal.net) & Remote DNS (hotmail.com) tests *not* passed, and ultimately, Connecting to the server failed. Error: 10060. Failed to submit mail to mx2.hotmail.com error. When I set My-Server's IP to static and equal to the external IP, 99.135.60.233, and again run SmtpDiag, I get SOA, Local DNS, and Remote DNS tests passed, but the same 10060 error. Same for yahoo.com, gmail.com, and so forth. Is it my ISP's job to fix this? Some PTR record missing somewhere? Is it at all possible to have a home-based SMTP server? All I want is to test my email code. Perhaps, my IP address is just not "trusted" somehow. Thanks.

Read the article

How to make RewriteCond+RewriteRule change domain2/folder1 to domain1/folder1

- by gman

There's actually 2 questions. One is, how do I make RewriteCond+RewriteRule change domain2/folder1 to domain1/folder1 Actually what I want is any domain that tries to access folder1 that is not domain1 gets switched to domain1. So for example domain2.com/domain1/foo - domain1.com/domain1/foo as well as domain3.com/domain1/foo - domain1.com/domain1/foo This is what I tried RewriteCond %{HTTP_HOST} !^domain1\.com$ [NC] RewriteCond %{REQUEST_URI} ^/folder1/ RewriteRule ^/folder1/(.*)$ http://domain1.com/folder1/$1 [L,R=permanent] But that doesn't work. Next I tried some a simpler rule to see if I could narrow down the issue. RewriteCond ${HTTP_HOST} domain2\.com [NC] RewriteRule ^(.*)$ http://google.com/ [L] I though that would make ANY request to domain2.com go to google.com so I tried http://domain2.com/foo but I get domain2.com/foo not google.com If I go to http://domain2.com I get google. Why don't I get there if I go to http://domain2.com/foo? What am I not understanding about mod_rewrite?

Read the article

HTML Tidy in NetBeans IDE (Part 2)

- by Geertjan

This is what I was aiming for in the previous blog entry: What you can see above (especially if you click to enlarge it) is that I have HTML Tidy integrated into the NetBeans analyzer functionality, which is pluggable from 7.2 onwards. Well, if you set an implementation dependency on "Static Analysis Core", since it's not an official API yet. Also, the scopes of the analyzer functionality are not pluggable. That means you can 'only' set the analyzer's scope to one or more projects, one or more packages, or one or more files. Not one or more folders, which means you can't have a bunch off HTML files in a folder that you access via the Favorites window and then run the analyzer on that folder (or on multiple folders). Thus, to try out my new code, I had to put some HTML files into a package inside a Java application. Then I chose that package as the scope of the analyzer. Then I ran all the analyzers (i.e., standard NetBeans Java hints, FindBugs, as well as my HTML Tidy extension) on that package. The screenshot above is the result. Here's all the code for the above, which is a port of the Action code from the previous blog entry into a new Analyzer implementation: import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import java.util.ArrayList; import java.util.Collections; import java.util.List; import javax.swing.JComponent; import javax.swing.text.Document; import org.netbeans.api.fileinfo.NonRecursiveFolder; import org.netbeans.modules.analysis.spi.Analyzer; import org.netbeans.modules.analysis.spi.Analyzer.AnalyzerFactory; import org.netbeans.modules.analysis.spi.Analyzer.Context; import org.netbeans.modules.analysis.spi.Analyzer.CustomizerProvider; import org.netbeans.modules.analysis.spi.Analyzer.WarningDescription; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.ErrorDescriptionFactory; import org.netbeans.spi.editor.hints.Severity; import org.openide.cookies.EditorCookie; import org.openide.filesystems.FileObject; import org.openide.loaders.DataObject; import org.openide.util.Exceptions; import org.openide.util.lookup.ServiceProvider; import org.w3c.tidy.Tidy; public class TidyAnalyzer implements Analyzer { private final Context ctx; private TidyAnalyzer(Context cntxt) { this.ctx = cntxt; } @Override public Iterable<? extends ErrorDescription> analyze() { List<ErrorDescription> result = new ArrayList<ErrorDescription>(); for (NonRecursiveFolder sr : ctx.getScope().getFolders()) { FileObject folder = sr.getFolder(); for (FileObject fo : folder.getChildren()) { for (ErrorDescription ed : doRunHTMLTidy(fo)) { if (fo.getMIMEType().equals("text/html")) { result.add(ed); } } } } return result; } private List<ErrorDescription> doRunHTMLTidy(FileObject sr) { final List<ErrorDescription> result = new ArrayList<ErrorDescription>(); Tidy tidy = new Tidy(); StringWriter stringWriter = new StringWriter(); PrintWriter errorWriter = new PrintWriter(stringWriter); tidy.setErrout(errorWriter); try { Document doc = DataObject.find(sr).getLookup().lookup(EditorCookie.class).openDocument(); tidy.parse(sr.getInputStream(), System.out); String[] split = stringWriter.toString().split("\n"); for (String string : split) { //Bit of ugly string parsing coming up: if (string.startsWith("line")) { final int end = string.indexOf(" c"); int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", "")); string = string.substring(string.indexOf(": ")).replace(":", ""); result.add(ErrorDescriptionFactory.createErrorDescription( Severity.WARNING, string, doc, lineNumber)); } } } catch (IOException ex) { Exceptions.printStackTrace(ex); } return result; } @Override public boolean cancel() { return true; } @ServiceProvider(service = AnalyzerFactory.class) public static final class MyAnalyzerFactory extends AnalyzerFactory { public MyAnalyzerFactory() { super("htmltidy", "HTML Tidy", "org/jtidy/format_misc.gif"); } public Iterable<? extends WarningDescription> getWarnings() { return Collections.EMPTY_LIST; } @Override public <D, C extends JComponent> CustomizerProvider<D, C> getCustomizerProvider() { return null; } @Override public Analyzer createAnalyzer(Context cntxt) { return new TidyAnalyzer(cntxt); } } } The above only works on packages, not on projects and not on individual files.

Read the article

TopComponent, Node, Lookup, Palette, and Visual Library

- by Geertjan

Here's a small example that puts together several pieces in the context of a NetBeans Platform application, i.e., TopComponent, Node, Lookup, Palette, and Visual Library: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.2/misc/CensusDesigner The result is a drag-and-drop user interface, i.e., drag items from the palette and drop them onto the window, that's all it does, nothing too fancy, just puts the basic NetBeans Platform pieces together in a pretty standard combination:

Read the article

When can an FTP server close its passive connections?

- by Don Kirkby

Does the FTP protocol allow the server to close any of its passive connections while the client is still connected? Can it tell when the client is finished receiving and then close the connection? I'm including an FTP server in my application using the pyftpdlib Python project. I've got it to work in active and passive mode, but I'm a bit concerned about when it closes its passive connections. I've tried connecting to it with both FileZilla and the default ftp command in Ubuntu, and in both cases, I get a new passive port for every request. That is, if I sit in the root folder and type ls 10 times, I use up 10 ports. This means that I have to allocate a big block of passive ports for the FTP server to use so it won't run out. As soon as the client disconnects, the server releases all the passive connections associated with that client and those ports can be reused. However, a long-running connection could use up a lot of ports.

Read the article

How to get the PID of a process started by /bin/su -c

- by crash3k

I'm writing a init.d-script for an java-app. But the java-app should be run by another user. (The OS I'm using is Debian Squeeze.) I already got this: /bin/su - $USER - c "cd $PATH;echo $PASSWORD | $JAVA -Xmx256m -jar $PATH/app.jar -d > /dev/null" & PID=$! /bin/su - $USER - c "echo $PID > $PIDFILE" But this will of course only save the pid of the "/bin/su"-process instead of the pid of the created java-process.

Read the article

Is there an OpenID demo server out there?

- by billpg

Hi everyone. I'm doing some experiements with adding OpenID to something I'm working on, and I'd like to test out a few providers. Is there a server out there that will go through the OpenID login process (same way that the StackOverflow group does) and tell me all the information the provider shows. I imagine it would work like... I go to example.com and type in https://www.google.com/accounts/o8/id example.com bounces me to google. I log in. Google asks me to confirm if I allow example.com access to everything. Google bounces me back to example.com example.com tells me my OpenID, email address, anything else it's got. Does such a thing please already exist?

Read the article

Default maximum heap size -- Ubuntu 10.04 LTS, openjdk6-jre

- by sachin

I just installed openjdk6-jre on Ubuntu 10.04 java version "1.6.0_20" OpenJDK Runtime Environment (IcedTea6 1.9.2) (6b20-1.9.2-0ubuntu1~10.04.1) OpenJDK 64-Bit Server VM (build 19.0-b09, mixed mode) Every time I run "java" I get this error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. This can be solved by specifying a maximum heap size and running "java -Xmx256m" But is there anyway to permanently fix this error (i.e. set the default heap size to 256MB so that I do not need to specify the max heap size every time I run the command)

Read the article

Outlook and exchange 2010 stalls email

- by lbanz

User found an old pst file which is around 15GB and imported to his exchange mailbox. It imported fine. Outlook client starts syncing the emails to exchange. It stalls and then the user will need to reopen the client for it to sync again. The client doesn't crash and still continues to receive new emails but it just doesn't sync the old emails. Sits on Updating folders but doesn't do anything. Shows no sync or conflicts in the client. No errors on progress and Outlook network connection seems fine.

Read the article

Reverse SSH tunnel: how can I send my port number to the server?

- by Tom

I have two machines, Client and Server. Client (who is behind a corporate firewall) opens a reverse SSH tunnel to Server, which has a publicly-accessible IP address, using this command: ssh -nNT -R0:localhost:2222 [email protected] In OpenSSH 5.3+, the 0 occurring just after the -R means "pick an available port" rather than explicitly calling for one. The reason I'm doing this is because I don't want to pick a port that's already in use. In truth, there are actually many Clients out there that need to set up similar tunnels. The problem at this point is that the server does not know which Client is which. If we want to connect back to one of these Clients (via localhost) then how do we know which port refers to which client? I'm aware that ssh reports the port number to the command line when used in the above manner. However, I'd also like to use autossh to keep the sessions alive. autossh runs its child process via fork/exec, presumably, so that the output of the actual ssh command is lost in the ether. Furthermore, I can't think of any other way to get the remote port from Client. Thus, I'm wondering if there is a way to determine this port on Server. One idea I have is to somehow use /etc/sshrc, which is supposedly a script that runs for every connection. However, I don't know how one would get the pertinent information here (perhaps the PID of the particular sshd process handling that connection?) I'd love some pointers. Thanks!

Read the article

bluetooth connection using pybluez

- by srj0408

I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

Read the article

Inaccurate bandwidth limiting in altq queues

- by overkordbaever

I'm setting up an environment where I have one Linux server, one OpenBSD router and one Linux client and I want to be able to limit how much bandwidth the client should be able to use. I've been performing these tests with "netcat" and "time" (using time to measure the time of the transfer with netcat), and what happens when trying these tests (using the TCP protocol, the queues will for some reason not work with UDP) is that the queues aren't exact at all. For example: when setting a bandwidth limit of 10mbit, the client cannot use more than five mbits, when setting a limit of 100mbit, the client cannot use more than around 50mbit. The config looks like (using a 100mbit limit in the example): #queue rules altq on { $int_if, $ext_if } cbq bandwidth 100Mb queue { def, low } queue def bandwidth 0Mb cbq(default) queue low bandwidth 100Mb cbq(default) #Passrules test pass out quick from $int_if to $ext_if queue low pass in quick from $ext_if to $int_if queue low pass out quick from $ext_if to $int_if queue low pass in quick from $int_if to $ext_if queue low

Read the article

Thunderbird 15.0.1 cannot use Exchange 2003 SMTP

- by speedreeder

I'm having the strangest time getting a Thunderbird email client to connect to my Exchange 2003 server. I got the incoming IMAP account set up no problem, and I can receive mail. However sending mail will not work no matter what SMTP settings I enter. After checking the server, the proper settings should be port 25 with no authentication or connection security, which I have entered. I can ping the hostname of the server from the client machine in question. The Thunderbird error message I get is: "Sending of message failed. The message could not be sent because the connection to SMTP server -hostname omitted- was lost in the middle of the transaction." So I went to the server and double checked the settings for Exchange's SMTP stuff. I have it correct. I tried to telnet (on the server) to localhost 25. It appears to connect and then disconnect immediately, no message, no nothing. When I telnet to other ports (POP-110 for example) I get proper connection messages and a stable connection. There are no firewalls on either the client or the server. There's a firewall on the network but LAN-LAN traffic is unrestricted. I can reproduce the Thunderbird error on a second client, and I can't get any client to be able to telnet in. Anyone have any ideas?

Read the article

Where on my C:/ or D:/ drive is the Windows startup directory ?

- by Frank

I am developing a Java program that needs to run when user turns on his PC, I was suggested to : create a .bat file @javaw -jar path/to/jar/Name.jar arguments drop this in the Windows startup directory My question is : Can my Java program save the above file into the Windows startup directory ? Where is this Windows startup directory on the C: or D: drive ? How can my Java app find out the location ? Is it the same on all versions of Windows ?

Read the article

JavaOne Content Available for Free

- by Tori Wieldt

JavaOne content is available in video in three sizes, depending on if you want to have a sip, have a drink, or go to the proverbial firehose. Tall (Keynote Highlights) Go to the JavaOne playlist on the YouTube Java channel for highlights of the JavaOne Keynotes. Grande (Keynotes in Full) Go to the Oracle Media Network JavaOne 2012 channel to view the keynotes in full (Community Keynote coming soon). Venti (All Sessions, BOFs and Tutorials) To view slides paired with audio of each session, go to the JavaOne content catalog (JavaOne homepage, click on JavaOne Technical Sessions) and select a session. If a video is available, you'll see "Media" in the right column. Look under "Presentation Download" to get the slides. Sessions are being made available as quickly as possible. "It's exciting to see Oracle take community stewardship so seriously," said Sharat Chander, Group Director for Java Technology Outreach. "Making all JavaOne sessions on video available online for free will helps make the future Java for everyone." Thanks to Oracle for funding this and providing to it to the Java Community for free.

Read the article

Do you think we will ever settle on a "standard" platform? [closed]

- by GazTheDestroyer

The recent explosion of phone platforms has depressed me (slightly), and made me wonder if we will ever reach any kind of standard for presentation? I don't mean language or IDE. Different languages have different strengths and I can see that there may always be a need for disparity, although I do note that languages are merging somewhat in functionality, with traditional imperitive languages like C++ now supporting things like lambdas. What I'm really talking about is a common presentation mechanism. Before smart phones and tablets came along, the web seemed to be finally becoming a reasonable platform for presenting an application that was globally accessible, not just geographically, but by platform too. Sure there are still (sometimes infuriating) implementation differences and quirks, but if you wrote a decent site you knew it could be accessed on anything from a PC to a phone to a C64 running the right software. "Write Once Run Anywhere" seemed to finally be becoming a reality. However, in the last few years we've seen an explosion of mobile operating systems, and the ubiquitous "app". A good site is no longer enough, you need a native "app", and of course we have a sudden massive disparity in OS, language, and APIs needed to write them as each battles for supremecy. It's kind of weird how the cycle of popularity goes. Mainframes with terminals - thin client. PC - thick client. Web browser - thin client. Phone app - thick(ish) client. I just wonder if you think there will ever be a global standard for clients, or whether the "shiny and different" cycle will always continue along with the battle of the tech du jour.

Read the article

Let varnish send old data from cache while it's fetching a new one?

- by mark

I'm caching dynamically generated pages (PHP-FPM, NGINX) and have varnish in front of them, this works very well. However, once the cache timeout is reached, I see this: new client requests page varnish recognizes the cache timeout client waits varnish fetches new page from backend varnish delivers new page to the client (and has page cached, too, for the next request which gets it instantly) What I would like to do is: client requests page varnish recognizes the timeout varnish delivers old page to the client varnish fetches new page from backend and puts it into the cache In my case it's not site where outdated information is such a big problem, especially not when we're talking about cache timeout from a few minutes. However, I don't want punish user to wait in line and rather deliver something immediate. Is that possible in some way? To illustrate, here's a sample output of running siege 5 minutes against my server which was configured to cache for one minute: HTTP/1.1,200, 1.97, 12710,/,1,2013-06-24 00:21:06 ... HTTP/1.1,200, 1.88, 12710,/,1,2013-06-24 00:21:20 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:22:08 ... HTTP/1.1,200, 1.89, 12710,/,1,2013-06-24 00:22:22 ... HTTP/1.1,200, 1.94, 12710,/,1,2013-06-24 00:23:10 ... HTTP/1.1,200, 1.91, 12709,/,1,2013-06-24 00:23:23 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:24:12 ... I left out the hundreds of requests running in 0.02 or so. But it still concerns me that there are going to be users having to wait almost 2 seconds for their raw HTML. Can't we do any better here? (I came across Varnish send while cache , it sounded similar but not exactly what I'm trying to do.)

Read the article

Gathering application architecture

- by userbb

Suppose there is system for gathering info about system activities. There is a client part with an interface and there are agent parts that are installed on each machine. I estimate that there could be max 20 computers now. Later could be more like 50. My solutions: Agent stores data into local database e.g. sqlite. There is also a service which can be used by a client to query data. So if a client wants to display data for 50 computers, he sends a query to 50 computers. I'am on that solution now but maybe it's totally wrong. Agent stores data into local database (I don't known good one for that). There is also server (main database) and local databases are synchronized with the server. In this case, a client connects to the main database to display data. Agent sends data in realtime to main database. So same as point 2, but there is no sync. Like in point 3, but agent buffers data in local database and sends it in small chunks to main database. What is the best approach?

Read the article

Vista: window focus problem

- by GateKiller

Sorry for the vague title but this one is hard to explain so bear with me please. I'm using Windows Vista at work for web development and sometimes when I Click or Alt-Tab to background window, the window will get focus but it will not be brought to the front. In order to bring the window to the front, I have to click on the applications border (when the resize cursor appears) and the window will then jump to the front. I've had this problem for about a year now and it happens at least a dozen times a day, but it doesn't do this all the time - seems random. I hope I have explained the issue fully (and you've understood it) and would appreciate any constructive answers or comments to solve this problem. Example: If I Alt-Tab from Google Chrome to Notepad and this problem randomly occurs, Google Chrome will remain in front of Notepad, however, I will be able to type text into Notepad while the window is behind Google Chrome. Clicking on Notepad's content area will not bring it to the front but clicking it's window border will. Video Exampe http://vimeo.com/19388998 In this video, I clicked from Google Chome to UltraEdit and chrome stayed in font, but as you can see, I can still type in UltraEdit. I'm starting to believe that this could be a bug in Google Chrome so I'll continue to watch if this between other applications.

Read the article

Python cannot go over internet network

- by user1642826

I am currently trying to work with python networking and I have reached a bit of a road block. I am not able to network with any computer but localhost, which is kind-of useless with what networking is concerned. I have tried on my local network, from one computer to another, and I have tried over the internet, both fail. The only time I can make it work is if (when running on the server's computer) it's ip is set as 'localhost' or '192.168.2.129' (computers ip). I have spent hours going over opening ports with my isp and have gotten nowhere, so I decided to try this forum. I have my windows firewall down and I have included some pictures of important screen shots. I have no idea what the problem is and this has spanned almost a year of calls to my isp. The computer, modem, and router have all been replaced in that time. Screen shots: import socket import threading import socketserver class ThreadedTCPRequestHandler(socketserver.BaseRequestHandler): def handle(self): data = self.request.recv(1024) cur_thread = threading.current_thread() response = "{}: {}".format(cur_thread.name, data) self.request.sendall(b'worked') class ThreadedTCPServer(socketserver.ThreadingMixIn, socketserver.TCPServer): pass def client(ip, port, message): sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.connect((ip, port)) try: sock.sendall(message) response = sock.recv(1024) print("Received: {}".format(response)) finally: sock.close() if __name__ == "__main__": # Port 0 means to select an arbitrary unused port HOST, PORT = "192.168.2.129", 9000 server = ThreadedTCPServer((HOST, PORT), ThreadedTCPRequestHandler) ip, port = server.server_address # Start a thread with the server -- that thread will then start one # more thread for each request server_thread = threading.Thread(target=server.serve_forever) # Exit the server thread when the main thread terminates server_thread.daemon = True server_thread.start() print("Server loop running in thread:", server_thread.name) ip = '12.34.56.789' print(ip, port) client(ip, port, b'Hello World 1') client(ip, port, b'Hello World 2') client(ip, port, b'Hello World 3') server.shutdown() I do not know where the error is occurring. I get this error: Traceback (most recent call last): File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 43, in <module> client(ip, port, b'Hello World 1') File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 18, in client sock.connect((ip, port)) socket.error: [Errno 10061] No connection could be made because the target machine actively refused it Any help will be greatly appreciated. *if this isn't a proper forum for this, could someone direct me to a more appropriate one.

Search Results

Search found 76226 results on 3050 pages for 'google api java client'.

Page 1625/3050 | < Previous Page | 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 | Next Page >

- by GioMac

- by Dan Sosedoff

- by Stan

- by Scott

- by Dinosaurus

- by datc

- by gman

- by Geertjan

- by Geertjan

- by Don Kirkby

- by crash3k

- by billpg

- by sachin

- by lbanz

- by Tom

- by srj0408

- by overkordbaever

- by speedreeder

- by Frank

- by Tori Wieldt

- by GazTheDestroyer

- by mark

- by userbb

- by GateKiller

- by user1642826

< Previous Page | 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 | Next Page >