base system device - Page 1626

Running TeamCity from Amazon EC2 - Cloud based scalable build and continuous Integration

- by RoyOsherove

I’ve been having fun playing with the amazon EC2 cloud service. I set up a server running TeamCity, and an image of a server that just runs a TeamCity agent. I also setup TeamCity to automatically instantiate agents on EC2 and shut them down based upon availability of free agents. Here’s how I did it: The first step was setting up the teamcity server. Create an account on amazon EC2 (BTW, amazon’s sites works better in IE than it does in chrome.. who knew!?) Open the EC2 dashboard, and click “Launch Instance” . From the “Quick Start” tab I selected from the list: “Getting Started on Microsoft Windows Server 2008 (AMI Id: ami-c5e40dac)” . it’s good enough to just run teamcity. In the instance details, I used the default (Small instance, 1.7 GB mem). You might want to choose a close availability zone based on where you are. We want to “Launch instances” so click continue. Select the default kernel, RAM disk and all. No need to enable monitoring for now (you can do that later). click continue. If you don’t have a key pair, you will be prompted to create one. Once you do, select it in the list. Now you’ll be prompted to create a security group. I named mine “TC” as in “TeamCity”. each group is a bunch of settings on which ports can be let through into and out of a hosted machine. keep it as the default settings. We will change them later. Click continue, review and then click “Launch”. Now you’ll be able to see the new instance in the running instances list on your site. Now, you need to install stuff on that instance (TeamCity!) . To do that, you’ll need to Remote desktop into that instance. To do that, we’ll get the admin password for that instance: Check it on the list, and click “Instance Actions” - “Get Windows Admin Password”. You might have to wait about 10 minutes or so for the password to be generated for you. Once you have the password, you will remote desktop (start-run-‘mstsc’) into the instance. It’s address is a dns address shown below the list under “Public DNS”. it looks something like: ec2-256-226-194-91.compute-1.amazonaws.com Once you’re inside the instance – you’ll need to open IE (it is in hardened mode so you’ll have to relax its security settings to download stuff). I first downloaded chrome and using chrome I downloaded TeamCity. Note that the download speed is FAST. several MBs per second. To be able to see TeamCity from the outside, you will need to open the advanced firewall settings inside the remote machine, and add incoming and outgoing rules for port 80 (HTTP). Once you do that, you should be able to see the machine from the outside. If you still can’t, see the next step. I also enabled ports 9090 since I will use this machine to create an agent image later as well. Now configure the security group (TC) to enable talking to agents: IN the EC2 dashboard click on “Security Groups” and select your group. To add a rule, click on the empty list under the ‘protocol’ header. select TCP. from and ‘to’ ports are 9090. source ip is 0.0.0.0/0 (every ip is allowed). click “Save. Also make sure you can see “HTTP” tcp 80 in that list. if you can’t see it, add it or you won’t be able to browse to the machine’s teamcity server home page. I also set an elastic IP for the machine: so I always have the same IP for the machine instance. Allocate and set one through the”Elastic IP” link on the EC2 dashboard. you should now have a working instance of teamcity. Now let’s create an agent image. Repeat steps 1-9, but this time, make sure you select a machine that fits what an agent might do. I selected Instance type – Hihg-CPU medium machine, that is much faster. On that machine, I installed what I needed (VS 2010, PostSharp etc..). downloading VS 2010 from MSDN (2 GB took less than 10 min!) Now, instead of installing teamcity, browse using the browser to the teamcity homepage (from within the remote machine). go to the Administration page, and click the upper right link “Install agents”. Install the agent on he local machine – set it to the IP or DNS of the running TeamCity server. That way you’ll be able to check their connectivity live before making this machine your official agent image to reuse. Once the agent is installed, see that the TC server can see it and use it. see steps 13-14 above if they can’t. Once it works, you can take steps to make this image your agent image to be reused. next, here is a copy-paste of several steps to take from http://confluence.jetbrains.net/display/TCD5/Setting+Up+TeamCity+for+Amazon+EC2 Configure system so that agent it is started on machine boot (and make sure TeamCity server is accessible on machine boot). Test the setup by rebooting machine and checking that the agent connects normally to the server. Prepare the Image for bundling: Remove any temporary/history information in the system. Stop the agent (under Windows stop the service but leave it in Automatic startup type) Delete content agent logs and temp directories (not necessary) Delete "<Agent Home>/conf/amazon-*" file (not necessary) Change config/buildAgent.properties to remove properties: name, serverAddress, authToken (not necessary) Now, we need to: Make AMI from the running instance. Configure TeamCity EC2 support on TeamCity server. Making an AMI: Check the instance of the agent in the EC2 dashboard instance list, and select instance actions->Create Image (EBS AMI) you’ll see the image pending in the APIs list in the EC2 dashboard. this could take 30 minutes or more. meanwhile we can configure the could support in the teamcity server. COPY THE AMI ID to the clipboard (looks like ami-a88aa4ce) Configuring TeamCity for Cloud: In TeamCity, click on “Agents” and then on “Cloud” tab. this is where you will control your cloud agents. to configure new cloud agents based on APIs, click on the right link to the “configuration page” Create a new profile and select AMazon EC2 as cloud type. Use your AMI ID that you copied to the clipboard into the “Images” field. Select an availability zone that is the same as the one your instance is running on for best communication perf between them make sure you select the ‘TC’ security group hopefully, that should be it, and teamcity will try to instantiate new instances on demand. Note that it may take around 10 minutes for an agent to become available to teamcity from the time it’s started.

Read the article

Use Autoruns to Manually Clean an Infected PC

- by Mark Virtue

There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program? Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit. It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer). Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer. It can be simply downloaded, unzipped and run (link below). This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry. Note: This does not terminate the program if it is running at the time – it merely prevents it from starting next time. To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)). Note: This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not. Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you. Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay. Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”). Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries: Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them. Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place. If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others. Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry. Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry. When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

Read the article

Client side code snipets

- by raghu.yadav

Read the article

C#: Does an IDisposable in a Halted Iterator Dispose?

- by James Michael Hare

If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5: 6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14: 15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21: 22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6: 7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12: 13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21: 22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9: 10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19: 20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23: 24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

Read the article

Accessing SharePoint 2010 Data with REST/OData on Windows Phone 7

- by Jan Tielens

Consuming SharePoint 2010 data in Windows Phone 7 applications using the CTP version of the developer tools is quite a challenge. The issue is that the SharePoint 2010 data is not anonymously available; users need to authenticate to be able to access the data. When I first tried to access SharePoint 2010 data from my first Hello-World-type Windows Phone 7 application I thought “Hey, this should be easy!” because Windows Phone 7 development based on Silverlight and SharePoint 2010 has a Client Object Model for Silverlight. Unfortunately you can’t use the Client Object Model of SharePoint 2010 on the Windows Phone platform; there’s a reference to an assembly that’s not available (System.Windows.Browser). My second thought was “OK, no problem!” because SharePoint 2010 also exposes a REST/OData API to access SharePoint data. Using the REST API in SharePoint 2010 is as easy as making a web request for a URL (in which you specify the data you’d like to retrieve), e.g. http://yoursiteurl/_vti_bin/listdata.svc/Announcements. This is very easy to accomplish in a Silverlight application that’s running in the context of a page in a SharePoint site, because the credentials of the currently logged on user are automatically picked up and passed to the WCF service. But a Windows Phone application is of course running outside of the SharePoint site’s page, so the application should build credentials that have to be passed to SharePoint’s WCF service. This turns out to be a small challenge in Silverlight 3, the WebClient doesn’t support authentication; there is a Credentials property but when you set it and make the request you get a NotImplementedException exception. Probably this issued will be solved in the very near future, since Silverlight 4 does support authentication, and there’s already a WCF Data Services download that uses this new platform feature of Silverlight 4. So when Windows Phone platform switches to Silverlight 4, you can just use the WebClient to get the data. Even more, if the OData Client Library for Windows Phone 7 gets updated after that, things should get even easier! By the way: the things I’m writing in this paragraph are just assumptions that I make which make a lot of sense IMHO, I don’t have any info all of this will happen, but I really hope so. So are SharePoint developers out of the Windows Phone development game until they get this fixed? Well luckily not, when the HttpWebRequest class is being used instead, you can pass credentials! Using the HttpWebRequest class is slightly more complex than using the WebClient class, but the end result is that you have access to your precious SharePoint 2010 data. The following code snippet is getting all the announcements of an Annoucements list in a SharePoint site: HttpWebRequest webReq = (HttpWebRequest)HttpWebRequest.Create("http://yoursite/_vti_bin/listdata.svc/Announcements");webReq.Credentials = new NetworkCredential("username", "password"); webReq.BeginGetResponse( (result) => { HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState; XDocument xdoc = XDocument.Load( ((HttpWebResponse)asyncReq.EndGetResponse(result)).GetResponseStream()); XNamespace ns = "http://www.w3.org/2005/Atom"; var items = from item in xdoc.Root.Elements(ns + "entry") select new { Title = item.Element(ns + "title").Value }; this.Dispatcher.BeginInvoke(() => { foreach (var item in items) MessageBox.Show(item.Title); }); }, webReq); When you try this in a Windows Phone 7 application, make sure you add a reference to the System.Xml.Linq assembly, because the code uses Linq to XML to parse the resulting Atom feed, so the Title of every announcement is being displayed in a MessageBox. Check out my previous post if you’d like to see a more polished sample Windows Phone 7 application that displays SharePoint 2010 data.When you plan to use this technique, it’s of course a good idea to encapsulate the code doing the request, so it becomes really easy to get the data that you need. In the following code snippet you can find the GetAtomFeed method that gets the contents of any Atom feed, even if you need to authenticate to get access to the feed. delegate void GetAtomFeedCallback(Stream responseStream); public MainPage(){ InitializeComponent(); SupportedOrientations = SupportedPageOrientation.Portrait | SupportedPageOrientation.Landscape; string url = "http://yoursite/_vti_bin/listdata.svc/Announcements"; string username = "username"; string password = "password"; string domain = ""; GetAtomFeed(url, username, password, domain, (s) => { XNamespace ns = "http://www.w3.org/2005/Atom"; XDocument xdoc = XDocument.Load(s); var items = from item in xdoc.Root.Elements(ns + "entry") select new { Title = item.Element(ns + "title").Value }; this.Dispatcher.BeginInvoke(() => { foreach (var item in items) { MessageBox.Show(item.Title); } }); });} private static void GetAtomFeed(string url, string username, string password, string domain, GetAtomFeedCallback cb){ HttpWebRequest webReq = (HttpWebRequest)HttpWebRequest.Create(url); webReq.Credentials = new NetworkCredential(username, password, domain); webReq.BeginGetResponse( (result) => { HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState; HttpWebResponse resp = (HttpWebResponse)asyncReq.EndGetResponse(result); cb(resp.GetResponseStream()); }, webReq);}

Read the article

The Shift: how Orchard painlessly shifted to document storage, and how it’ll affect you

- by Bertrand Le Roy

We’ve known it all along. The storage for Orchard content items would be much more efficient using a document database than a relational one. Orchard content items are composed of parts that serialize naturally into infoset kinds of documents. Storing them as relational data like we’ve done so far was unnatural and requires the data for a single item to span multiple tables, related through 1-1 relationships. This means lots of joins in queries, and a great potential for Select N+1 problems. Document databases, unfortunately, are still a tough sell in many places that prefer the more familiar relational model. Being able to x-copy Orchard to hosters has also been a basic constraint in the design of Orchard. Combine those with the necessity at the time to run in medium trust, and with license compatibility issues, and you’ll find yourself with very few reasonable choices. So we went, a little reluctantly, for relational SQL stores, with the dream of one day transitioning to document storage. We have played for a while with the idea of building our own document storage on top of SQL databases, and Sébastien implemented something more than decent along those lines, but we had a better way all along that we didn’t notice until recently… In Orchard, there are fields, which are named properties that you can add dynamically to a content part. Because they are so dynamic, we have been storing them as XML into a column on the main content item table. This infoset storage and its associated API are fairly generic, but were only used for fields. The breakthrough was when Sébastien realized how this existing storage could give us the advantages of document storage with minimal changes, while continuing to use relational databases as the substrate. public bool CommercialPrices { get { return this.Retrieve(p => p.CommercialPrices); } set { this.Store(p => p.CommercialPrices, value); } } This code is very compact and efficient because the API can infer from the expression what the type and name of the property are. It is then able to do the proper conversions for you. For this code to work in a content part, there is no need for a record at all. This is particularly nice for site settings: one query on one table and you get everything you need. This shows how the existing infoset solves the data storage problem, but you still need to query. Well, for those properties that need to be filtered and sorted on, you can still use the current record-based relational system. This of course continues to work. We do however provide APIs that make it trivial to store into both record properties and the infoset storage in one operation: public double Price { get { return Retrieve(r => r.Price); } set { Store(r => r.Price, value); } } This code looks strikingly similar to the non-record case above. The difference is that it will manage both the infoset and the record-based storages. The call to the Store method will send the data in both places, keeping them in sync. The call to the Retrieve method does something even cooler: if the property you’re looking for exists in the infoset, it will return it, but if it doesn’t, it will automatically look into the record for it. And if that wasn’t cool enough, it will take that value from the record and store it into the infoset for the next time it’s required. This means that your data will start automagically migrating to infoset storage just by virtue of using the code above instead of the usual: public double Price { get { return Record.Price; } set { Record.Price = value; } } As your users browse the site, it will get faster and faster as Select N+1 issues will optimize themselves away. If you preferred, you could still have explicit migration code, but it really shouldn’t be necessary most of the time. If you do already have code using QueryHints to mitigate Select N+1 issues, you might want to reconsider those, as with the new system, you’ll want to avoid joins that you don’t need for filtering or sorting, further optimizing your queries. There are some rare cases where the storage of the property must be handled differently. Check out this string[] property on SearchSettingsPart for example: public string[] SearchedFields { get { return (Retrieve<string>("SearchedFields") ?? "") .Split(new[] {',', ' '}, StringSplitOptions.RemoveEmptyEntries); } set { Store("SearchedFields", String.Join(", ", value)); } } The array of strings is transformed by the property accessors into and from a comma-separated list stored in a string. The Retrieve and Store overloads used in this case are lower-level versions that explicitly specify the type and name of the attribute to retrieve or store. You may be wondering what this means for code or operations that look directly at the database tables instead of going through the new infoset APIs. Even if there is a record, the infoset version of the property will win if it exists, so it is necessary to keep the infoset up-to-date. It’s not very complicated, but definitely something to keep in mind. Here is what a product record looks like in Nwazet.Commerce for example: And here is the same data in the infoset: The infoset is stored in Orchard_Framework_ContentItemRecord or Orchard_Framework_ContentItemVersionRecord, depending on whether the content type is versionable or not. A good way to find what you’re looking for is to inspect the record table first, as it’s usually easier to read, and then get the item record of the same id. Here is the detailed XML document for this product: <Data> <ProductPart Inventory="40" Price="18" Sku="pi-camera-box" OutOfStockMessage="" AllowBackOrder="false" Weight="0.2" Size="" ShippingCost="null" IsDigital="false" /> <ProductAttributesPart Attributes="" /> <AutoroutePart DisplayAlias="camera-box" /> <TitlePart Title="Nwazet Pi Camera Box" /> <BodyPart Text="[...]" /> <CommonPart CreatedUtc="2013-09-10T00:39:00Z" PublishedUtc="2013-09-14T01:07:47Z" /> </Data> The data is neatly organized under each part. It is easy to see how that document is all you need to know about that content item, all in one table. If you want to modify that data directly in the database, you should be careful to do it in both the record table and the infoset in the content item record. In this configuration, the record is now nothing more than an index, and will only be used for sorting and filtering. Of course, it’s perfectly fine to mix record-backed properties and record-less properties on the same part. It really depends what you think must be sorted and filtered on. In turn, this potentially simplifies migrations considerably. So here it is, the great shift of Orchard to document storage, something that Orchard has been designed for all along, and that we were able to implement with a satisfying and surprising economy of resources. Expect this code to make its way into the 1.8 version of Orchard when that’s available.

Read the article

CEN/CENELEC Lacks Perspective

- by trond-arne.undheim

Over the last few months, two of the European Standardization Organizations (ESOs), CEN and CENELEC have circulated an unfortunate position statement distorting the facts around fora and consortia. For the benefit of outsiders to this debate, let's just say that this debate regards whether and how the EU should recognize standards and specifications from certain fora and consortia based on a process evaluating the openness and transparency of such deliverables. The topic is complex, and somewhat confusing even to insiders, but nevertheless crucial to the European economy. As far as I can judge, their positions are not based on facts. This is unfortunate. For the benefit of clarity, here are some of the observations they make: a)"Most consortia are in essence driven by technology companies making hardware and software solutions, by definition very few of the largest ones are European-based". b) "Most consortia lack a European presence, relevant Committees, even those that are often cited as having stronger links with Europe, seem to lack an overall, inclusive set of participants". c) "Recognising specific consortia specifications will not resolve any concrete problems of interoperability for public authorities; interoperability depends on stringing together a range of specifications (from formal global bodies or consortia alike)". d) "Consortia already have the option to have their specifications adopted by the international formal standards bodies and many more exercise this than the two that seem to be campaigning for European recognition. Such specifications can then also be adopted as European standards." e) "Consortium specifications completely lack any process to take due and balanced account of requirements at national level - this is not important for technologies but can be a critical issue when discussing cross-border issues within the EU such as eGovernment, eHealth and so on". f) "The proposed recognition will not lead to standstill on national or European activities, nor to the adoption of the specifications as national standards in the CEN and CENELEC members (usually in their official national languages), nor to withdrawal of conflicting national standards. A big asset of the European standardization system is its coherence and lack of fragmentation." g) "We always miss concrete and specific examples of where consortia referencing are supposed to be helpful." First of all, note that ETSI, the third ESO, did not join the position. The reason is, of course, that ETSI beyond being an ESO, also has a global perspective and, moreover, does consider reality. Secondly, having produced arguments a) to g), CEN/CENELEC has the audacity to call a meeting on Friday 25 February entitled "ICT standardization - improving collaboration in Europe". This sounds very nice, but they have not set the stage for constructive debate. Rather, they demonstrate a striking lack of vision and lack of perspective. I will back this up by three facts, and leave it there. 1. Since the 1980s, global industry fora and consortia, such as IETF, W3C and OASIS have emerged as world-leading ICT standards development organizations with excellent procedures for openness and transparency in all phases of standards development, ex post and ex ante. - Practically no ICT system can be built without using fora and consortia standards (FCS). - Without using FCS, neither the Internet, upon which the EU economy depends, nor EU institutions would operate. - FCS are of high relevance for achieving and promoting interoperability and driving innovation. 2. FCS are complementary to the formally recognized standards organizations including the ESOs. - No work will be taken away from the ESOs should the EU recognize certain FCS. - Each FCS would be evaluated on its merit and on the openness of the process that produced it. ESOs would, with other stakeholders, have a say. - ESOs could potentially educate and assist European stakeholders to engage more actively and constructively with FCS. - ETSI, also an ESO, seems to clearly recognize these facts. 3. Europe and its Member States have a strong voice in several of the most relevant global industry fora and consortia. - W3C: W3C was founded in 1994 by an Englishman, Sir Tim Berners-Lee, in collaboration with CERN, the European research lab. In April 1995, INRIA (Institut National de Recherche en Informatique et Automatique) in France became the first European W3C host and in 2003, ERCIM (European Research Consortium in Informatics and Mathematics), also based in France, took over the role of European W3C host from INRIA. Today, W3C has 326 Members, 40% of which are European. Government participation is also strong, and it could be increased - a development that is very much desired by W3C. Current members of the W3C Advisory Board includes Ora Lassila (Nokia) and Charles McCathie Nevile (Opera). Nokia is Finnish company, Opera is a Norwegian company. SAP's Claus von Riegen is an alumni of the same Advisory Board. - OASIS: its membership - 30% of which is European - represents the marketplace, reflecting a balance of providers, user companies, government agencies, and non-profit organizations. In particular, about 15% of OASIS members are governments or universities. Frederick Hirsch from Nokia, Claus von Riegen from SAP AG and Charles-H. Schulz from Ars Aperta are on the Board of Directors. Nokia is a Finnish company, SAP is a German company and Ars Aperta is a French company. The Chairman of the Board is Peter Brown, who is an Independent Consultant, an Austrian citizen AND an official of the European Parliament currently on long-term leave. - IETF: The oversight of its activities is by the Internet Architecture Board (IAB), since 2007 chaired by Olaf Kolkman, a Dutch national who lives in Uithoorn, NL. Kolkman is director of NLnet Labs, a foundation chartered to develop open source software and open source standards for the Internet. Other IAB members include Marcelo Bagnulo whose affiliation is the University Carlos III of Madrid, Spain as well as Hannes Tschofenig from Nokia Siemens Networks. Nokia is a Finnish company. Siemens is a German company. Nokia Siemens is a European joint venture. - Member States: At least 17 European Member States have developed Interoperability Frameworks that include FCS, according to the EU-funded National Interoperability Framework Observatory (see list and NIFO web site on IDABC). This also means they actively procure solutions using FCS, reference FCS in their policies and even in laws. Member State reps are free to engage in FCS, and many do. It would be nice if the EU adjusted to this reality. - A huge number of European nationals work in the global IT industry, on European soil or elsewhere, whether in EU registered companies or not. CEN/CENELEC lacks perspective and has engaged in an effort to twist facts that is quite striking from a publicly funded organization. I wish them all possible success with Friday's meeting but I fear all of the most important stakeholders will not be at the table. Not because they do not wish to collaborate, but because they just have been insulted. If they do show up, it would be a gracious move, almost beyond comprehension. While I do not expect CEN/CENELEC to line up perfectly in favor of fora and consortia, I think it would be to their benefit to stick to more palatable observations. Actually, I would suggest an apology, straightening out the facts. This works among friends and it works in an organizational context. Then, we can all move on. Standardization is important. Too important to ignore. Too important to distort. The European economy depends on it. We need CEN/CENELEC. It is an important organization. But CEN/CENELEC needs fora and consortia, too.

Read the article

Package management fails in update-manager with gzip problems and compilation errors. U12.04LTS

- by HarveyP

Similar to but not the same as Package management system corrupted. Cannot install or remove packages. U12.04LTS (an earlier problem) with package management system. Followed all of L. D. James suggestions in his answer to no avail. This time as well as the gzip error I am also getting compilation errors. The difference may be due to a lack of compilation in my earlier problem so it may be the same error. The packages concerned are enumerated in the output from update-manager below. Also included below that is the output from apt-get -f install apt-get autoremove gives same output. Tried update without SSL updates - 9 to install and got "Unhandled Error in aptdaemon". Output number 3 below. One at a time - output 4 - is for firefox, first in the list of packages. Falls over at libssl1.0.0 despite deselection of it from update ... Tried apt-get install --reinstall dpkg which succeeded, apt-get install --reinstall tar and apt-get install --reinstall gzip both of which failed at libssl1.0.0 as ever. (as suggested by Subv3rsion elsewhere in this forum) Now cannot apt-get update with complete success even after changing server and apt-get clean - output number 5 below ... 1). Output from update-manager The following packages will be upgraded:<> firefox firefox-globalmenu firefox-locale-en libavcodec-extra-53 libavformat53 libavutil-extra-51 libjson0 libpostproc52 libssl1.0.0 libswscale2 openssl 11 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.<br> Need to get 0 B/46.5 MB of archives. After this operation, 1,416 kB of additional disk space will be used.<br> Do you want to continue [Y/n]? y debconf: Perl may be unconfigured (Bareword "gensym" not allowed while "strict subs" in use at /usr/lib/perl/5.14/IO/Handle.pm line 67. BEGIN not safe after errors--compilation aborted at /usr/lib/perl/5.14/IO/Handle.pm line 366. Compilation failed in require at /usr/lib/perl/5.14/IO/Seekable.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/Seekable.pm line 9. Compilation failed in require at /usr/lib/perl/5.14/IO/File.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/File.pm line 11. Compilation failed in require at /usr/share/perl/5.14/FileHandle.pm line 9. Compilation failed in require at (eval 1) line 3. BEGIN failed--compilation aborted at (eval 1) line 3. ) -- aborting (Reading database ... 160575 files and directories currently installed.) Preparing to replace libssl1.0.0 1.0.1-4ubuntu5.14 (using .../libssl1.0.0_1.0.1-4ubuntu5.15_i386.deb) ... Unpacking replacement libssl1.0.0 ... dpkg-deb (subprocess): data: internal gzip read error: '<fd:4>: data error' dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg: error processing /var/cache/apt/archives/libssl1.0.0_1.0.1-4ubuntu5.15_i386.deb (--unpack):<br> subprocess dpkg-deb --fsys-tarfile returned error exit status 2 No apport report written because MaxReports has already been reached Bareword "gensym" not allowed while "strict subs" in use at /usr/lib/perl/5.14/IO/Handle.pm line 67. BEGIN not safe after errors--compilation aborted at /usr/lib/perl/5.14/IO/Handle.pm line 366. Compilation failed in require at /usr/lib/perl/5.14/IO/Seekable.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/Seekable.pm line 9. Compilation failed in require at /usr/lib/perl/5.14/IO/File.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/File.pm line 11. Compilation failed in require at /usr/share/perl/5.14/FileHandle.pm line 9. Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7. Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10. Compilation failed in require at /usr/share/perl5/Debconf/Db.pm line 7. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Db.pm line 7. Compilation failed in require at /usr/share/debconf/frontend line 6. BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 6. dpkg: error whale cleanang up: subprgcess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/libssl1.0.0_1.0.1-4ubuntu5.15_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) 2). Output from install -f harveyp@harveyp:~$ sudo apt-get -f install [sudo] password for harveyp: Reading package lists... Done Building dependency tree Reading state information... Done 0 to upgrade, 0 to newly install, 0 to remove and 11 not to upgrade. 1 not fully installed or removed.<br> After this operation, 0 B of additional disk space will be used. E: Internal Error, No file name for libssl1.0.0 3). Unhandled error from aptdaemon Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1045, in _simulate trans.unauthenticated = self.__simulate(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1160, in __simulate unauthenticated = self._get_unauthenticated() File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 347, in _get_unauthenticated for pkg in self._iterate_packages(): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1356, in _iterate_packages for enum, pkg in enumerate(self._cache): File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 216, in __iter__ yield self[pkgname] File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 201, in __getitem__ pkg = self._weakref[key] = Package(self, self._cache[key]) KeyError: 'librqrcode-rubq-doc 4). output from update of firefox installArchives() failed: Error in function: < Setting up libssl1.0.0 (1.0.1-4ubuntu5.14) ... Bareword "gensym" not allowed while "strict subs" in use at /usr/lib/perl/5.14/IO/Handle.pm line 67. BEGIN not safe after errors--compilation aborted at /usr/lib/perl/5.14/IO/Handle.pm line 366. Compilation failed in require at /usr/lib/perl/5.14/IO/Seekable.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/Seekable.pm line 9. Compilation failed in require at /usr/lib/perl/5.14/IO/File.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/File.pm line 11. Compilation failed in require at /usr/share/perl/5.14/FileHandle.pm line 9. Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7. Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10. 5. output from apt-get update ...snip ... Hit http://ubuntu-archive.mirrors.free.org precise-security/multiverse Translation-en Hit http://ubuntu-archive.mirrors.free.org precise-security/restricted Translation-en Hit http://ubuntu-archive.mirrors.free.org precise-security/universe Translation-en Fetched 368 kB in 6s (59.5 kB/s) W: Failed to fetch gzip:/var/lib/apt/lists/partial/ubuntu-archive.mirrors.free.org_ubuntu_dists_precise_universe_source_Sources Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead.

Read the article

CodePlex Daily Summary for Sunday, May 23, 2010

CodePlex Daily Summary for Sunday, May 23, 2010New ProjectsA2Command: Apple 2 port of CBM-Command (http://cbmcommand.codeplex.com)AgUnit: AgUnit is a plugin for Jetbrains ReSharper (R#) that allows you to run and debug Silverlight unit tests from within Visual Studio.BSonPosh Powershell Module: A collection of useful Powershell functions I have written and collected over the years. It is a Powershell v2 Module composed of mostly scripts.DB Restriker: Simple tool for lookup, parsing, searching some standard databases using wildcards and pattern recognition.Entity Framework Repository & Unit of Work Template: T4 Template for Entity Framework 4 for creating a data access layer using the repository and unit of work patterns. Designed to work well with dep...Fiction Catalog: A catalog project designed to store information about fictional literature.Giving a Presentation: Useful for people doing presentations, this application hides desktop icons, disables screensaver, closes chosen programs when presentation starts,...glueless: Glueless is a local message bus which allows architect to design highly decoupled systems and applications. Glueless is a step beyond dependency i...HtmlCodeIt: Take any code and format it so that it can be viewed properly on a web browser, blog post or website.just testproject :): just have a test!KanbanTaskboard: The aim of the project is to design and implement a functional prototype for visualizing and operating a multi-platform virtual "Kanban Taskboard”Life System: Life SystemOaSys Project: Project Oasys is a project that aims to help solve desertification. Scoring of pingPong Game: Scoring of pingPong GameSilverlight Web Comic: The Silverlight Web Comic makes easier for the people create your own comic with your own pictures o drawings, and add the globes of text like the ...TickSharp: C# Wrapper for http://TickSpot.com RESTful API.Traductor: El Traductor es una aplicación de escritorio para traducción de frases entre distintos idiomas basada en la plataforma Silverlight Out Of Browser y...WatchersNET.SkinObjects.ModulActionsMenu: Displays the Module Actions Menu as a Unsorted CSS Menu.xxfd1r4w96: testingNew ReleasesAgUnit: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1.zip into the "Bin\Plugins\" folder of your ReSharper installation (default C:...ASP.NET MVC | SCAFFOLD: ASP.NET MVC SCAFFOLD - Beta 1.0: Release versão betaBizTalk Server 2006 Documenter: Documenter_v3.4.0.0: This is the new release of the documenter which has the following highlights Support for 64 bit systems Support for SxS scenarios (so now the sys...CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 Beta 2- VS 2008 Replacement: The CassiniDev Visual Studio build is a fully compatibly Visual Studio 2008/2010 Development server drop-in replacement with all CassiniDev enhance...CBM-Command: 2010-05-22 Beta: Release Notes - 2010-05-22 BetaNew Features Simple text file viewer. Now when you use SHIFT-RETURN to open a file, it will ask if you want to view...Easy Validation: Documentation: Documentation for easyVal was created and presented at University of Texas at Austin in May of 2010.Entity Framework Repository & Unit of Work Template: 1.0: Initial ReleaseFrotz.NET: FrotzNet 1.0 beta: Many, many changes, including: - Got Adaptive Palette working for graphics - Got undo working - Implemented all zcodes - Added scripting as well as...Giving a Presentation: CTP: This release includes basic extensibility infrastructure and three extensions: hides desktop icons, disables screensaver, closes chosen programs wh...Gov 2.0 Kit: SharePoint 2010 MyPeeps Mysite Accelerators: SharePoint 2010 MyPeeps Mysite Accelerators. Attached are the installation and documentations files.HKGolden Express: HKGoldenExpress (Build 201005221900): New features: (None) Bug fix: Hong Kong special characters now can be posted without encoding problem. Improvements: (None) Other changes: (None) K...Intellibox - A WPF auto complete textbox search control: Beta 2: Updated the namespace of the Intellibox control from "System.Windows.Controls" to "FeserWard.Controls". Empty binding Path properties now work on...MDownloader: MDownloader-0.15.14.59111: Fixed DepositFile provider. Fixed FileFactory provider. Added simple fakeness detector (can check if .rar, .zip, .7z files have valid signature...Mute4: V1: Initial version of Mute4NLog - Advanced .NET Logging: Nightly Build 2010.05.22.003: Changes since the last build:No changes. Unit test results:Passed 191/191 (100%) Passed 191/191 (100%) Passed 214/214 (100%) Passed 216/216 (100%)...NSIS Autorun: NSIS Autorun 0.1.9: This release includes source code, executable binaries and example materials.Silverlight Gantt Chart: Silverlight Gantt Chart 1.3 (SL4): The latest release mainly makes the Gantt Chart useful in Silverlight 4 applications.SqlServerExtensions: V 0.2 beta: V 0.2 Beta release: New features available TrimStart - trim leading characters TrimEnd - trim trailing characters Remove - remove characters f...Traductor: Version 3.1: Nuevo en esta versión: El Traductor ahora permite escoger entre los motores de Microsoft y Google. El Text to Speech is es ahora habilitado por...VCC: Latest build, v2.1.30522.0: Automatic drop of latest buildVDialer Add-In for Outlook 2007 & 2010 - Dial your Vonage phone from Outlook: VDialer Add-In 1.0.3: This release adds new features related to Journal and use of Vonage API Changes in version 1.0.3 Added configurable option to automatically open J...WatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.00: First Release For Informations How To Install, the Skin Object Read the DocumentationMost Popular ProjectsCodeComment.NETRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryCaliburn: An Application Framework for WPF and Silverlightpatterns & practices: Windows Azure Security GuidanceCassiniDev - Cassini 3.5/4.0 Developers EditionGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSQL Server PowerShell ExtensionsBlogEngine.NETCodeReview

Read the article

CodePlex Daily Summary for Monday, May 17, 2010

CodePlex Daily Summary for Monday, May 17, 2010New Projects.NET Essentials Course: .NET Essentials course @ Telerik Academy Training project for the studentsAU/NZ Office 2010 Launch Demos: The AU/NZ Office 2010 Launch Demos are a collection of code samples that were used as part of the Office/SharePoint 2010 launch parties in Australi...CybennyCMS: Very simple CMS system for building sites with ASP.NET with templates for lay-out, content pages with only html content and a xml file for the site...essionPIM: essionPIMGIStance: A library for finding "nearest neighbor" among an in-memory set of positions, in C# and F#. A radius must be specified for making a meaningful s...IP Informer: IP Informer is IP Informer.Kurumsal Ofis Paketi: Kurumsal Ofis Paketi (KOP), Microsoft Ofis 2010 ürünleri için geliştirilmiş eklenti yazılımıdır. KOP, Word ve Excel’de bulunan işlevlerinin genişle...Mockup to XAML: Convert Balsamiq Mockups to XAML. This project supports BMML mockup control conversion using plugins. A standard set of controls are included wit...Open XML Validator: This WPF app give you a brief resume about errors in your Open XML documents.Paint.NET Bulk Image Processor: PDNBulkUpdater is a plug-in for Paint.NET that allows you to efficiently perform operations such as resizing and converting multiple images at the ...PiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统Roleplay character generator: The roleplay character generator allows the creation of characters for different roleplaying gamesSharePoint User Search WebParts: This project contains SharePoint webparts which provide advanced search configuration and experience for SharePoint 2007. It will be upgrade in few...Spodi: Spodi is created on 22-04-2010TfsPolicyPack: This project will provide a few checkin policies for VS 2010.vccodesandobx: vccodesandobxvccodesandobxvccodesandobxWhiteNile: test project using codeplexNew ReleasesAnimeStore.Net: 1.0.3.0: Build 1.0.3.0 Changes Move some functionality to features (MEF) Filter / Search functionality. Anime hard-copy records storage (e.g Disk Storage ...AU/NZ Office 2010 Launch Demos: Twitter map web part: This is the main twitter map web part download, see the Twitter Map web part page for all the information.Blueset Studio Opensource Projects: 推来: 稳定版本BUtil: BUtil 5.0 Alpha2: The initial implementation of multitasking (except ghost)CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta: Beta 2 is released here: url http://cassinidev.codeplex.com/releases/view/45456 New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. ...CBM-Command: 2010-05-16: Release Notes - 2010-05-16New Features New navigation options: Page Up, Page Down, Top of Directory, Bottom of Directory. See documentation (http:...CCNet Conditional Plugin: CCNet Conditional for CCNet 1.5: A (quick) build of the plugin for CCNet 1.5 to fix the 17365 bug reported by Beakster. This also adds a new condition "timeCondition"CybennyCMS: Cybenny CMS beta 1: The first beta. Includes a small demo site.Data Extracting SDK: Data Extracting SDK v.1.1 RTM: RTM version of Data Extracting SDK.Duckworth Lewis Professional Edition Calculator: DLcalc 2.0: This software can perform all D/L calculations 100% accurately. From version 2.0 onwards, tables for par scores can also be produced.EPiServer CMS Page Type Builder: Page Type Builder 1.2: Release notes can be found in this blog post.Floe IRC Client: Floe IRC Client 2010-05 R5: - Many new context menu options for @s - Ability to select multiple users in the nick list for some operations (kick, ban) - Bunch of minor bug fix...Graffiti CMS Events Plugin: Version 1.0.1: Minor update to previous version to fix bug where deleted posts were still showing in the calendar.Microsoft Research Boogie: 2010-05-16: Binary release of Boogie and Dafny. (Note, Chalice is not pre-built as part of this binary release. To obtain it, you need to build it yourself f...MSBuild Launch Pad (mPad): 1.0 Beta 2: Basic support for sln, csproj, vbproj, vcxproj, shfbproj, ccproj, oxygene and proj files are added. Basic settings (Show Prompt, and Auto Hide) are...Multi-Language Words Memorizer: Memorizer 1.1: Issues fix, XML db update with new words.NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.1: New release of NShader! New : - a Visual Studio 2010 port can be installed through the new extension manager : you just have to download NShaderV...PHPExcel: PHPExcel 1.7.3 Production: Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also add your name / company on our Donati...Rollback - A social backup tool.: Rollback Setup 0.5.1.2 Build 48360: Bug fixes for backing up files which are hidden/system. Changes to make builds on 64 bit Windows 7 using VS 2010 Express edition.Rollback - A social backup tool.: Rollback Setup 0.5.1.3: Updated version number.Shake - C# Make: Shake v0.1.20: New: Simple console logger Changes: Command line params helper writes out syntax and samples (like msbuild) Fixes: Assembly info, file task and r...SharePoint User Search WebParts: v0.1 Friendly MOSS 2007 Search WebPart: Very first version of this webpart. A more stabilized version will follow in few days.Team Deploy: Team Deploy 2010 Beta 1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comp...Team Foundation Server Administration Tool: 2.0: TFS Administration Tool 2.0 TFS Administration Tool 2.0 is built on top of the Team Foundation Server 2008 object model and in order to connect to...The Ping Master: v0.9.0.0: Installer for The Ping Master binariesUseful Office Macros: All Macro Downloads: Please find above the downloads related to this project. Each Excel Workbook below works independently of the others, so you only need to download...VCC: Latest build, v2.1.30516.0: Automatic drop of latest buildVisual Studio DSite: Advanced Digital Board Game (Visual C++ 2008): An advanced digital board game made in visual c 2008.YUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool Full Version: Version 1.0 The following changes have been made: Merged classes to automatically sense if the target file is Javascript or CSS. Cleaned up setu...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelBlogEngine.NETRawrMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersDotNetZip LibraryCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell Extensions

Read the article

Prevent your Silverlight XAP file from caching in your browser.

- by mbcrump

If you work with Silverlight daily then you have run into this problem. Your XAP file has been cached in your browser and you have to empty your browser cache to resolve it. If your using Google Chrome then you typically do the following: Go to Options –> Clear Browsing History –> Empty the Cache and finally click Clear Browsing data. As you can see, this is a lot of unnecessary steps. It is even worse when you have a customer that says, “I can’t see the new features you just implemented!” and you realize it’s a cached xap problem. I have been struggling with a way to prevent my XAP file from caching inside of a browser for a while now and decided to implement the following solution. If the Visual Studio Debugger is attached then add a unique query string to the source param to force the XAP file to be refreshed. If the Visual Studio Debugger is not attached then add the source param as Visual Studio generates it. This is also in case I forget to remove the above code in my production environment. I want the ASP.NET code to be inline with my .ASPX page. (I do not want a separate code behind .cs page or .vb page attached to the .aspx page.) Below is an example of the hosting code generated when you create a new Silverlight project. As a quick refresher, the hard coded param name = “source” specifies the location of your XAP file. <form id="form1" runat="server" style="height:100%"> <div id="silverlightControlHost"> <object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%"> <param name="source" value="ClientBin/SilverlightApplication2.xap"/> <param name="onError" value="onSilverlightError" /> <param name="background" value="white" /> <param name="minRuntimeVersion" value="4.0.50826.0" /> <param name="autoUpgrade" value="true" /> <a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=4.0.50826.0" style="text-decoration:none"> <img src="http://go.microsoft.com/fwlink/?LinkId=161376" alt="Get Microsoft Silverlight" style="border-style:none"/> </a> </object><iframe id="_sl_historyFrame" style="visibility:hidden;height:0px;width:0px;border:0px"></iframe></div> </form> We are going to use a little bit of inline ASP.NET to generate the param name = source dynamically to prevent the XAP file from caching. Lets look at the completed solution: <form id="form1" runat="server" style="height:100%"> <div id="silverlightControlHost"> <object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%"> <% string strSourceFile = @"ClientBin/SilverlightApplication2.xap"; string param; if (System.Diagnostics.Debugger.IsAttached) //Debugger Attached - Refresh the XAP file. param = "<param name=\"source\" value=\"" + strSourceFile + "?" + DateTime.Now.Ticks + "\" />"; else { //Production Mode param = "<param name=\"source\" value=\"" + strSourceFile + "\" />"; } Response.Write(param); %> <param name="onError" value="onSilverlightError" /> <param name="background" value="white" /> <param name="minRuntimeVersion" value="4.0.50826.0" /> <param name="autoUpgrade" value="true" /> <a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=4.0.50826.0" style="text-decoration:none"> <img src="http://go.microsoft.com/fwlink/?LinkId=161376" alt="Get Microsoft Silverlight" style="border-style:none"/> </a> </object><iframe id="_sl_historyFrame" style="visibility:hidden;height:0px;width:0px;border:0px"></iframe></div> </form> We add the location to our XAP file to strSourceFile and if the debugger is attached then it will append DateTime.Now.Ticks to the XAP file source and force the browser to download the .XAP. If you view the page source of your Silverlight Application then you can verify it worked properly by looking at the param name = “source” tag as shown below. <param name="source" value="ClientBin/SilverlightApplication2.xap?634299001187160148" /> If the debugger is not attached then it will use the standard source tag as shown below. <param name="source" value="ClientBin/SilverlightApplication2.xap"/> At this point you may be asking, How do I prevent my XAP file from being cached on my production app? Well, you have two easy options: 1) I really don’t recommend this approach but you can force the XAP to be refreshed everytime with the following code snippet. <param name="source" value="ClientBin/SilverlightApplication2.xap?<%=Guid.NewGuid().ToString() %>"/> NOTE: You could also substitute the “Guid.NewGuid().ToString() for anything that create a random field. (I used DateTime.Now.Ticks earlier). 2) Another solution that I like even better involves checking the XAP Creation Date and appending it to the param name = source. This method was described by Lars Holm Jenson. <% string strSourceFile = @"ClientBin/SilverlightApplication2.xap"; string param; if (System.Diagnostics.Debugger.IsAttached) param = "<param name=\"source\" value=\"" + strSourceFile + "\" />"; else { string xappath = HttpContext.Current.Server.MapPath(@"") + @"\" + strSourceFile; DateTime xapCreationDate = System.IO.File.GetLastWriteTime(xappath); param = "<param name=\"source\" value=\"" + strSourceFile + "?ignore=" + xapCreationDate.ToString() + "\" />"; } Response.Write(param); %> As you can see, this problem has been solved. It will work with all web browsers and stubborn proxy servers that are caching your .XAP. If you enjoyed this article then check out my blog for others like this. You may also want to subscribe to my blog or follow me on Twitter. Subscribe to my feed

Read the article

CodePlex Daily Summary for Sunday, June 01, 2014

CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

Read the article

Integrate Google Wave With Your Windows Workflow

- by Matthew Guay

Have you given Google Wave a try, only to find it difficult to keep up with? Here’s how you can integrate Google Wave with your desktop and workflow with some free and simple apps. Google Wave is an online web app, and unlike many Google services, it’s not easily integrated with standard desktop applications. Instead, you’ll have to keep it open in a browser tab, and since it is one of the most intensive HTML5 webapps available today, you may notice slowdowns in many popular browsers. Plus, it can be hard to stay on top of your Wave conversations and collaborations by just switching back and forth between the website and whatever else you’re working on. Here we’ll look at some tools that can help you integrate Google Wave with your workflow, and make it feel more native in Windows. Use Google Wave Directly in Windows What’s one of the best ways to make a web app feel like a native application? By making it into a native application, of course! Waver is a free Air powered app that can make the mobile version of Google Wave feel at home on your Windows, Mac, or Linux desktop. We found it to be a quick and easy way to keep on top of our waves and collaborate with our friends. To get started with Waver, open their homepage on the Adobe Air Marketplace (link below) and click Download From Publisher. Waver is powered by Adobe Air, so if you don’t have Adobe Air installed, you’ll need to first download and install it. After clicking the link above, Adobe Air will open a prompt asking what you wish to do with the file. Click Open, and then install as normal. Once the installation is finished, enter your Google Account info in the window. After a few moments, you’ll see your Wave account in miniature, running directly in Waver. Click a Wave to view it, or click New wave to start a new Wave message. Unfortunately, in our tests the search box didn’t seem to work, but everything else worked fine. Google Wave works great in Waver, though all of the Wave features are not available since it is running the mobile version of Wave. You can still view content from plugins, including YouTube videos, directly in Waver. Get Wave Notifications From Your Windows Taskbar Most popular email and Twitter clients give you notifications from your system tray when new messages come in. And with Google Wave Notifier, you can now get the same alerts when you receive a new Wave message. Head over to the Google Wave Notifier site (link below), and click the download link to get started. Make sure to download the latest Binary zip, as this one will contain the Windows program rather than the source code. Unzip the folder, and then run GoogleWaveNotifier.exe. On first run, you can enter your Google Account information. Notice that this is not a standard account login window; you’ll need to enter your email address in the Username field, and then your password below it. You can also change other settings from this dialog, including update frequency and whether or not to run at startup. Click the value, and then select the setting you want from the dropdown menu. Now, you’ll have a new Wave icon in your system tray. When it detects new Waves or unread updates, it will display a popup notification with details about the unread Waves. Additionally, the icon will change to show the number of unread Waves. Click the popup to open Wave in your browser. Or, if you have Waver installed, simply open the Waver window to view your latest Waves. If you ever need to change settings again in the future, right-click the icon and select Settings, and then edit as above. Get Wave Notifications in Your Email Most of us have Outlook or Gmail open all day, and seldom leave the house without a Smartphone with push email. And thanks to a new Wave feature, you can still keep up with your Waves without having to change your workflow. To activate email notifications from Google Wave, login to your Wave account, click the arrow beside your Inbox, and select Notifications. Select how quickly you want to receive notifications, and choose which email address you wish to receive the notifications. Click Save when you’re finished. Now you’ll receive an email with information about new and updated Waves in your account. If there were only small changes, you may get enough info directly in the email; otherwise, you can click the link and open that Wave in your browser. Conclusion Google Wave has great potential as a collaboration and communications platform, but by default it can be hard to keep up with what’s going on in your Waves. These apps for Windows help you integrate Wave with your workflow, and can keep you from constantly logging in and checking for new Waves. And since Google Wave registration is now open for everyone, it’s a great time to give it a try and see how it works for yourself. Links Signup for Google Wave (Google Account required) Download Waver from the Adobe Air Marketplace Download Google Wave Notifier Similar Articles Productive Geek Tips We Have 20 Google Wave Invites. Want One?Tired of Waiting for Google Wave? Try ShareFlow NowIntegrate Google Docs with Outlook the Easy WayAwesome Desktop Wallpapers: The Windows 7 EditionWeek in Geek: The Stupid Geek Tricks to Hide Extra Windows Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer

Read the article

SQL SERVER – Using expressor Composite Types to Enforce Business Rules

- by pinaldave

One of the features that distinguish the expressor Data Integration Platform from other products in the data integration space is its concept of composite types, which provide an effective and easily reusable way to clearly define the structure and characteristics of data within your application. An important feature of the composite type approach is that it allows you to easily adjust the content of a record to its ultimate purpose. For example, a record used to update a row in a database table is easily defined to include only the minimum set of columns, that is, a value for the key column and values for only those columns that need to be updated. Much like a class in higher level programming languages, you can also use the composite type as a way to enforce business rules onto your data by encapsulating a datum’s name, data type, and constraints (for example, maximum, minimum, or acceptable values) as a single entity, which ensures that your data can not assume an invalid value. To what extent you use this functionality is a decision you make when designing your application; the expressor design paradigm does not force this approach on you. Let’s take a look at how these features are used. Suppose you want to create a group of applications that maintain the employee table in your human resources database. Your table might have a structure similar to the HumanResources.Employee table in the AdventureWorks database. This table includes two columns, EmployeID and rowguid, that are maintained by the relational database management system; you cannot provide values for these columns when inserting new rows into the table. Additionally, there are columns such as VacationHours and SickLeaveHours that you might choose to update for all employees on a monthly basis, which justifies creation of a dedicated application. By creating distinct composite types for the read, insert and update operations against this table, you can more easily manage this table’s content. When developing this application within expressor Studio, your first task is to create a schema artifact for the database table. This process is completely driven by a wizard, only requiring that you select the desired database schema and table. The resulting schema artifact defines the mapping of result set records to a record within the expressor data integration application. The structure of the record within the expressor application is a composite type that is given the default name CompositeType1. As you can see in the following figure, all columns from the table are included in the result set and mapped to an identically named attribute in the default composite type. If you are developing an application that needs to read this table, perhaps to prepare a year-end report of employees by department, you would probably not be interested in the data in the rowguid and ModifiedDate columns. A typical approach would be to drop this unwanted data in a downstream operator. But using an alternative composite type provides a better approach in which the unwanted data never enters your application. While working in expressor Studio’s schema editor, simply create a second composite type within the same schema artifact, which you could name ReadTable, and remove the attributes corresponding to the unwanted columns. The value of an alternative composite type is even more apparent when you want to insert into or update the table. In the composite type used to insert rows, remove the attributes corresponding to the EmployeeID primary key and rowguid uniqueidentifier columns since these values are provided by the relational database management system. And to update just the VacationHours and SickLeaveHours columns, use a composite type that includes only the attributes corresponding to the EmployeeID, VacationHours, SickLeaveHours and ModifiedDate columns. By specifying this schema artifact and composite type in a Write Table operator, your upstream application need only deal with the four required attributes and there is no risk of unintentionally overwriting a value in a column that does not need to be updated. Now, what about the option to use the composite type to enforce business rules? If you review the composition of the default composite type CompositeType1, you will note that the constraints defined for many of the attributes mirror the table column specifications. For example, the maximum number of characters in the NationaIDNumber, LoginID and Title attributes is equivalent to the maximum width of the target column, and the size of the MaritalStatus and Gender attributes is limited to a single character as required by the table column definition. If your application code leads to a violation of these constraints, an error will be raised. The expressor design paradigm then allows you to handle the error in a way suitable for your application. For example, a string value could be truncated or a numeric value could be rounded. Moreover, you have the option of specifying additional constraints that support business rules unrelated to the table definition. Let’s assume that the only acceptable values for marital status are S, M, and D. Within the schema editor, double-click on the MaritalStatus attribute to open the Edit Attribute window. Then click the Allowed Values checkbox and enter the acceptable values into the Constraint Value text box. The schema editor is updated accordingly. There is one more option that the expressor semantic type paradigm supports. Since the MaritalStatus attribute now clearly specifies how this type of information should be represented (a single character limited to S, M or D), you can convert this attribute definition into a shared type, which will allow you to quickly incorporate this definition into another composite type or into the description of an output record from a transform operator. Again, double-click on the MaritalStatus attribute and in the Edit Attribute window, click Convert, which opens the Share Local Semantic Type window that you use to name this shared type. There’s no requirement that you give the shared type the same name as the attribute from which it was derived. You should supply a name that makes it obvious what the shared type represents. In this posting, I’ve overviewed the expressor semantic type paradigm and shown how it can be used to make your application development process more productive. The beauty of this feature is that you choose when and to what extent you utilize the functionality, but I’m certain that if you opt to follow this approach your efforts will become more efficient and your work will progress more quickly. As always, I encourage you to download and evaluate expressor Studio for your current and future data integration needs. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

Read the article

Fraud Detection with the SQL Server Suite Part 2

- by Dejan Sarka

This is the second part of the fraud detection whitepaper. You can find the first part in my previous blog post about this topic. My Approach to Data Mining Projects It is impossible to evaluate the time and money needed for a complete fraud detection infrastructure in advance. Personally, I do not know the customer’s data in advance. I don’t know whether there is already an existing infrastructure, like a data warehouse, in place, or whether we would need to build one from scratch. Therefore, I always suggest to start with a proof-of-concept (POC) project. A POC takes something between 5 and 10 working days, and involves personnel from the customer’s site – either employees or outsourced consultants. The team should include a subject matter expert (SME) and at least one information technology (IT) expert. The SME must be familiar with both the domain in question as well as the meaning of data at hand, while the IT expert should be familiar with the structure of data, how to access it, and have some programming (preferably Transact-SQL) knowledge. With more than one IT expert the most time consuming work, namely data preparation and overview, can be completed sooner. I assume that the relevant data is already extracted and available at the very beginning of the POC project. If a customer wants to have their people involved in the project directly and requests the transfer of knowledge, the project begins with training. I strongly advise this approach as it offers the establishment of a common background for all people involved, the understanding of how the algorithms work and the understanding of how the results should be interpreted, a way of becoming familiar with the SQL Server suite, and more. Once the data has been extracted, the customer’s SME (i.e. the analyst), and the IT expert assigned to the project will learn how to prepare the data in an efficient manner. Together with me, knowledge and expertise allow us to focus immediately on the most interesting attributes and identify any additional, calculated, ones soon after. By employing our programming knowledge, we can, for example, prepare tens of derived variables, detect outliers, identify the relationships between pairs of input variables, and more, in only two or three days, depending on the quantity and the quality of input data. I favor the customer’s decision of assigning additional personnel to the project. For example, I actually prefer to work with two teams simultaneously. I demonstrate and explain the subject matter by applying techniques directly on the data managed by each team, and then both teams continue to work on the data overview and data preparation under our supervision. I explain to the teams what kind of results we expect, the reasons why they are needed, and how to achieve them. Afterwards we review and explain the results, and continue with new instructions, until we resolve all known problems. Simultaneously with the data preparation the data overview is performed. The logic behind this task is the same – again I show to the teams involved the expected results, how to achieve them and what they mean. This is also done in multiple cycles as is the case with data preparation, because, quite frankly, both tasks are completely interleaved. A specific objective of the data overview is of principal importance – it is represented by a simple star schema and a simple OLAP cube that will first of all simplify data discovery and interpretation of the results, and will also prove useful in the following tasks. The presence of the customer’s SME is the key to resolving possible issues with the actual meaning of the data. We can always replace the IT part of the team with another database developer; however, we cannot conduct this kind of a project without the customer’s SME. After the data preparation and when the data overview is available, we begin the scientific part of the project. I assist the team in developing a variety of models, and in interpreting the results. The results are presented graphically, in an intuitive way. While it is possible to interpret the results on the fly, a much more appropriate alternative is possible if the initial training was also performed, because it allows the customer’s personnel to interpret the results by themselves, with only some guidance from me. The models are evaluated immediately by using several different techniques. One of the techniques includes evaluation over time, where we use an OLAP cube. After evaluating the models, we select the most appropriate model to be deployed for a production test; this allows the team to understand the deployment process. There are many possibilities of deploying data mining models into production; at the POC stage, we select the one that can be completed quickly. Typically, this means that we add the mining model as an additional dimension to an existing DW or OLAP cube, or to the OLAP cube developed during the data overview phase. Finally, we spend some time presenting the results of the POC project to the stakeholders and managers. Even from a POC, the customer will receive lots of benefits, all at the sole risk of spending money and time for a single 5 to 10 day project: The customer learns the basic patterns of frauds and fraud detection The customer learns how to do the entire cycle with their own people, only relying on me for the most complex problems The customer’s analysts learn how to perform much more in-depth analyses than they ever thought possible The customer’s IT experts learn how to perform data extraction and preparation much more efficiently than they did before All of the attendees of this training learn how to use their own creativity to implement further improvements of the process and procedures, even after the solution has been deployed to production The POC output for a smaller company or for a subsidiary of a larger company can actually be considered a finished, production-ready solution It is possible to utilize the results of the POC project at subsidiary level, as a finished POC project for the entire enterprise Typically, the project results in several important “side effects” Improved data quality Improved employee job satisfaction, as they are able to proactively contribute to the central knowledge about fraud patterns in the organization Because eventually more minds get to be involved in the enterprise, the company should expect more and better fraud detection patterns After the POC project is completed as described above, the actual project would not need months of engagement from my side. This is possible due to our preference to transfer the knowledge onto the customer’s employees: typically, the customer will use the results of the POC project for some time, and only engage me again to complete the project, or to ask for additional expertise if the complexity of the problem increases significantly. I usually expect to perform the following tasks: Establish the final infrastructure to measure the efficiency of the deployed models Deploy the models in additional scenarios Through reports By including Data Mining Extensions (DMX) queries in OLTP applications to support real-time early warnings Include data mining models as dimensions in OLAP cubes, if this was not done already during the POC project Create smart ETL applications that divert suspicious data for immediate or later inspection I would also offer to investigate how the outcome could be transferred automatically to the central system; for instance, if the POC project was performed in a subsidiary whereas a central system is available as well Of course, for the actual project, I would repeat the data and model preparation as needed It is virtually impossible to tell in advance how much time the deployment would take, before we decide together with customer what exactly the deployment process should cover. Without considering the deployment part, and with the POC project conducted as suggested above (including the transfer of knowledge), the actual project should still only take additional 5 to 10 days. The approximate timeline for the POC project is, as follows: 1-2 days of training 2-3 days for data preparation and data overview 2 days for creating and evaluating the models 1 day for initial preparation of the continuous learning infrastructure 1 day for presentation of the results and discussion of further actions Quite frequently I receive the following question: are we going to find the best possible model during the POC project, or during the actual project? My answer is always quite simple: I do not know. Maybe, if we would spend just one hour more for data preparation, or create just one more model, we could get better patterns and predictions. However, we simply must stop somewhere, and the best possible way to do this, according to my experience, is to restrict the time spent on the project in advance, after an agreement with the customer. You must also never forget that, because we build the complete learning infrastructure and transfer the knowledge, the customer will be capable of doing further investigations independently and improve the models and predictions over time without the need for a constant engagement with me.

Read the article

PowerShell Script to Enumerate SharePoint 2010 or 2013 Permissions and Active Directory Group Membership

- by Brian T. Jackett

Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/07/01/powershell-script-to-enumerate-sharepoint-2010-or-2013-permissions-and.aspx In this post I will present a script to enumerate SharePoint 2010 or 2013 permissions across the entire farm down to the site (SPWeb) level. As a bonus this script also recursively expands the membership of any Active Directory (AD) group including nested groups which you wouldn’t be able to find through the SharePoint UI. History Back in 2009 (over 4 years ago now) I published one my most read blog posts about enumerating SharePoint 2007 permissions. I finally got around to updating that script to remove deprecated APIs, supporting the SharePoint 2010 commandlets, and fixing a few bugs. There are 2 things that script did that I had to remove due to major architectural or procedural changes in the script. Indenting the XML output Ability to search for a specific user I plan to add back the ability to search for a specific user but wanted to get this version published first. As for indenting the XML that could be added but would take some effort. If there is user demand for it (let me know in the comments or email me using the contact button at top of blog) I’ll move it up in priorities. As a side note you may also notice that I’m not using the Active Directory commandlets. This was a conscious decision since not all environments have them available. Instead I’m relying on the older [ADSI] type accelerator and APIs. It does add a significant amount of code to the script but it is necessary for compatibility. Hopefully in a few years if I need to update again I can remove that legacy code. Solution Below is the script to enumerate SharePoint 2010 and 2013 permissions down to site level. You can also download it from my SkyDrive account or my posting on the TechNet Script Center Repository. SkyDrive TechNet Script Center Repository http://gallery.technet.microsoft.com/scriptcenter/Enumerate-SharePoint-2010-35976bdb 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 ########################################################### #DisplaySPWebApp8.ps1 # #Author: Brian T. Jackett #Last Modified Date: 2013-07-01 # #Traverse the entire web app site by site to display # hierarchy and users with permissions to site. ########################################################### function Expand-ADGroupMembership { Param ( [Parameter(Mandatory=$true, Position=0)] [string] $ADGroupName, [Parameter(Position=1)] [string] $RoleBinding ) Process { $roleBindingText = "" if(-not [string]::IsNullOrEmpty($RoleBinding)) { $roleBindingText = " RoleBindings=`"$roleBindings`"" } Write-Output "<ADGroup Name=`"$($ADGroupName)`"$roleBindingText>" $domain = $ADGroupName.substring(0, $ADGroupName.IndexOf("\") + 1) $groupName = $ADGroupName.Remove(0, $ADGroupName.IndexOf("\") + 1) #BEGIN - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY #http://www.microsoft.com/technet/scriptcenter/scripts/powershell/search/users/srch106.mspx #GET AD GROUP FROM DIRECTORY SERVICES SEARCH $strFilter = "(&(objectCategory=Group)(name="+($groupName)+"))" $objDomain = New-Object System.DirectoryServices.DirectoryEntry $objSearcher = New-Object System.DirectoryServices.DirectorySearcher $objSearcher.SearchRoot = $objDomain $objSearcher.Filter = $strFilter # specify properties to be returned $colProplist = ("name","member","objectclass") foreach ($i in $colPropList) { $catcher = $objSearcher.PropertiesToLoad.Add($i) } $colResults = $objSearcher.FindAll() #END - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY foreach ($objResult in $colResults) { if($objResult.Properties["Member"] -ne $null) { foreach ($member in $objResult.Properties["Member"]) { $indMember = [adsi] "LDAP://$member" $fullMemberName = $domain + ($indMember.Name) #if($indMember["objectclass"] # if child AD group continue down chain if(($indMember | Select-Object -ExpandProperty objectclass) -contains "group") { Expand-ADGroupMembership -ADGroupName $fullMemberName } elseif(($indMember | Select-Object -ExpandProperty objectclass) -contains "user") { Write-Output "<ADUser>$fullMemberName</ADUser>" } } } } Write-Output "</ADGroup>" } } #end Expand-ADGroupMembership # main portion of script if((Get-PSSnapin -Name microsoft.sharepoint.powershell) -eq $null) { Add-PSSnapin Microsoft.SharePoint.PowerShell } $farm = Get-SPFarm Write-Output "<Farm Guid=`"$($farm.Id)`">" $webApps = Get-SPWebApplication foreach($webApp in $webApps) { Write-Output "<WebApplication URL=`"$($webApp.URL)`" Name=`"$($webApp.Name)`">" foreach($site in $webApp.Sites) { Write-Output "<SiteCollection URL=`"$($site.URL)`">" foreach($web in $site.AllWebs) { Write-Output "<Site URL=`"$($web.URL)`">" # if site inherits permissions from parent then stop processing if($web.HasUniqueRoleAssignments -eq $false) { Write-Output "" } # else site has unique permissions else { foreach($assignment in $web.RoleAssignments) { if(-not [string]::IsNullOrEmpty($assignment.Member.Xml)) { $roleBindings = ($assignment.RoleDefinitionBindings | Select-Object -ExpandProperty name) -join "," # check if assignment is SharePoint Group if($assignment.Member.XML.StartsWith('<Group') -eq "True") { Write-Output "<SPGroup Name=`"$($assignment.Member.Name)`" RoleBindings=`"$roleBindings`">" foreach($SPGroupMember in $assignment.Member.Users) { # if SharePoint group member is an AD Group if($SPGroupMember.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $SPGroupMember.Name } # else SharePoint group member is an AD User else { # remove claim portion of user login #Write-Output "<ADUser>$($SPGroupMember.UserLogin.Remove(0,$SPGroupMember.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser>$($SPGroupMember.UserLogin)</ADUser>" } } Write-Output "</SPGroup>" } # else an indivdually listed AD group or user else { if($assignment.Member.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $assignment.Member.Name -RoleBinding $roleBindings } else { # remove claim portion of user login #Write-Output "<ADUser>$($assignment.Member.UserLogin.Remove(0,$assignment.Member.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser RoleBindings=`"$roleBindings`">$($assignment.Member.UserLogin)</ADUser>" } } } } } Write-Output "</Site>" $web.Dispose() } Write-Output "</SiteCollection>" $site.Dispose() } Write-Output "</WebApplication>" } Write-Output "</Farm>" The output from the script can be sent to an XML which you can then explore using the [XML] type accelerator. This lets you explore the XML structure however you see fit. See the screenshot below for an example. If you do view the XML output through a text editor (Notepad++ for me) notice the format. Below we see a SharePoint site that has a SharePoint group Demo Members with Edit permissions assigned. Demo Members has an AD group corp\developers as a member. corp\developers has a child AD group called corp\DevelopersSub with 1 AD user in that sub group. As you can see the script recursively expands the AD hierarchy. Conclusion It took me 4 years to finally update this script but I‘m happy to get this published. I was able to fix a number of errors and smooth out some rough edges. I plan to develop this into a more full fledged tool over the next year with more features and flexibility (copy permissions, search for individual user or group, optional enumerate lists / items, etc.). If you have any feedback, feature requests, or issues running it please let me know. Enjoy the script! -Frog Out

Read the article

J2EE Applications, SPARC T4, Solaris Containers, and Resource Pools

- by user12620111

I've obtained a substantial performance improvement on a SPARC T4-2 Server running a J2EE Application Server Cluster by deploying the cluster members into Oracle Solaris Containers and binding those containers to cores of the SPARC T4 Processor. This is not a surprising result, in fact, it is consistent with other results that are available on the Internet. See the "references", below, for some examples. Nonetheless, here is a summary of my configuration and results. (1.0) Before deploying a J2EE Application Server Cluster into a virtualized environment, many decisions need to be made. I'm not claiming that all of the decisions that I have a made will work well for every environment. In fact, I'm not even claiming that all of the decisions are the best possible for my environment. I'm only claiming that of the small sample of configurations that I've tested, this is the one that is working best for me. Here are some of the decisions that needed to be made: (1.1) Which virtualization option? There are several virtualization options and isolation levels that are available. Options include: Hard partitions: Dynamic Domains on Sun SPARC Enterprise M-Series Servers Hypervisor based virtualization such as Oracle VM Server for SPARC (LDOMs) on SPARC T-Series Servers OS Virtualization using Oracle Solaris Containers Resource management tools in the Oracle Solaris OS to control the amount of resources an application receives, such as CPU cycles, physical memory, and network bandwidth. Oracle Solaris Containers provide the right level of isolation and flexibility for my environment. To borrow some words from my friends in marketing, "The SPARC T4 processor leverages the unique, no-cost virtualization capabilities of Oracle Solaris Zones" (1.2) How to associate Oracle Solaris Containers with resources? There are several options available to associate containers with resources, including (a) resource pool association (b) dedicated-cpu resources and (c) capped-cpu resources. I chose to create resource pools and associate them with the containers because I wanted explicit control over the cores and virtual processors. (1.3) Cluster Topology? Is it best to deploy (a) multiple application servers on one node, (b) one application server on multiple nodes, or (c) multiple application servers on multiple nodes? After a few quick tests, it appears that one application server per Oracle Solaris Container is a good solution. (1.4) Number of cluster members to deploy? I chose to deploy four big 64-bit application servers. I would like go back a test many 32-bit application servers, but that is left for another day. (2.0) Configuration tested. (2.1) I was using a SPARC T4-2 Server which has 2 CPU and 128 virtual processors. To understand the physical layout of the hardware on Solaris 10, I used the OpenSolaris psrinfo perl script available at http://hub.opensolaris.org/bin/download/Community+Group+performance/files/psrinfo.pl: test# ./psrinfo.pl -pv The physical processor has 8 cores and 64 virtual processors (0-63) The core has 8 virtual processors (0-7) The core has 8 virtual processors (8-15) The core has 8 virtual processors (16-23) The core has 8 virtual processors (24-31) The core has 8 virtual processors (32-39) The core has 8 virtual processors (40-47) The core has 8 virtual processors (48-55) The core has 8 virtual processors (56-63) SPARC-T4 (chipid 0, clock 2848 MHz) The physical processor has 8 cores and 64 virtual processors (64-127) The core has 8 virtual processors (64-71) The core has 8 virtual processors (72-79) The core has 8 virtual processors (80-87) The core has 8 virtual processors (88-95) The core has 8 virtual processors (96-103) The core has 8 virtual processors (104-111) The core has 8 virtual processors (112-119) The core has 8 virtual processors (120-127) SPARC-T4 (chipid 1, clock 2848 MHz) (2.2) The "before" test: without processor binding. I started with a 4-member cluster deployed into 4 Oracle Solaris Containers. Each container used a unique gigabit Ethernet port for HTTP traffic. The containers shared a 10 gigabit Ethernet port for JDBC traffic. (2.3) The "after" test: with processor binding. I ran one application server in the Global Zone and another application server in each of the three non-global zones (NGZ): (3.0) Configuration steps. The following steps need to be repeated for all three Oracle Solaris Containers. (3.1) Stop AppServers from the BUI. (3.2) Stop the NGZ. test# ssh test-z2 init 5 (3.3) Enable resource pools: test# svcadm enable pools (3.4) Create the resource pool: test# poolcfg -dc 'create pool pool-test-z2' (3.5) Create the processor set: test# poolcfg -dc 'create pset pset-test-z2' (3.6) Specify the maximum number of CPU's that may be addd to the processor set: test# poolcfg -dc 'modify pset pset-test-z2 (uint pset.max=32)' (3.7) bash syntax to add Virtual CPUs to the processor set: test# (( i = 64 )); while (( i < 96 )); do poolcfg -dc "transfer to pset pset-test-z2 (cpu $i)"; (( i = i + 1 )) ; done (3.8) Associate the resource pool with the processor set: test# poolcfg -dc 'associate pool pool-test-z2 (pset pset-test-z2)' (3.9) Tell the zone to use the resource pool that has been created: test# zonecfg -z test-z1 set pool=pool-test-z2 (3.10) Boot the Oracle Solaris Container test# zoneadm -z test-z2 boot (3.11) Save the configuration to /etc/pooladm.conf test# pooladm -s (4.0) Results. Using the resource pools improves both throughput and response time: (5.0) References: System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones Capitalizing on large numbers of processors with WebSphere Portal on Solaris WebSphere Application Server and T5440 (Dileep Kumar's Weblog) http://www.brendangregg.com/zones.html Reuters Market Data System, RMDS 6 Multiple Instances (Consolidated), Performance Test Results in Solaris, Containers/Zones Environment on Sun Blade X6270 by Amjad Khan, 2009.

Read the article

Nashorn, the rhino in the room

- by costlow

Nashorn is a new runtime within JDK 8 that allows developers to run code written in JavaScript and call back and forth with Java. One advantage to the Nashorn scripting engine is that is allows for quick prototyping of functionality or basic shell scripts that use Java libraries. The previous JavaScript runtime, named Rhino, was introduced in JDK 6 (released 2006, end of public updates Feb 2013). Keeping tradition amongst the global developer community, "Nashorn" is the German word for rhino. The Java platform and runtime is an intentional home to many languages beyond the Java language itself. OpenJDK’s Da Vinci Machine helps coordinate work amongst language developers and tool designers and has helped different languages by introducing the Invoke Dynamic instruction in Java 7 (2011), which resulted in two major benefits: speeding up execution of dynamic code, and providing the groundwork for Java 8’s lambda executions. Many of these improvements are discussed at the JVM Language Summit, where language and tool designers get together to discuss experiences and issues related to building these complex components. There are a number of benefits to running JavaScript applications on JDK 8’s Nashorn technology beyond writing scripts quickly: Interoperability with Java and JavaScript libraries. Scripts do not need to be compiled. Fast execution and multi-threading of JavaScript running in Java’s JRE. The ability to remotely debug applications using an IDE like NetBeans, Eclipse, or IntelliJ (instructions on the Nashorn blog). Automatic integration with Java monitoring tools, such as performance, health, and SIEM. In the remainder of this blog post, I will explain how to use Nashorn and the benefit from those features. Nashorn execution environment The Nashorn scripting engine is included in all versions of Java SE 8, both the JDK and the JRE. Unlike Java code, scripts written in nashorn are interpreted and do not need to be compiled before execution. Developers and users can access it in two ways: Users running JavaScript applications can call the binary directly:jre8/bin/jjs This mechanism can also be used in shell scripts by specifying a shebang like #!/usr/bin/jjs Developers can use the API and obtain a ScriptEngine through:ScriptEngine engine = new ScriptEngineManager().getEngineByName("nashorn"); When using a ScriptEngine, please understand that they execute code. Avoid running untrusted scripts or passing in untrusted/unvalidated inputs. During compilation, consider isolating access to the ScriptEngine and using Type Annotations to only allow @Untainted String arguments. One noteworthy difference between JavaScript executed in or outside of a web browser is that certain objects will not be available. For example when run outside a browser, there is no access to a document object or DOM tree. Other than that, all syntax, semantics, and capabilities are present. Examples of Java and JavaScript The Nashorn script engine allows developers of all experience levels the ability to write and run code that takes advantage of both languages. The specific dialect is ECMAScript 5.1 as identified by the User Guide and its standards definition through ECMA international. In addition to the example below, Benjamin Winterberg has a very well written Java 8 Nashorn Tutorial that provides a large number of code samples in both languages. Basic Operations A basic Hello World application written to run on Nashorn would look like this: #!/usr/bin/jjs print("Hello World"); The first line is a standard script indication, so that Linux or Unix systems can run the script through Nashorn. On Windows where scripts are not as common, you would run the script like: jjs helloWorld.js. Receiving Arguments In order to receive program arguments your jjs invocation needs to use the -scripting flag and a double-dash to separate which arguments are for jjs and which are for the script itself:jjs -scripting print.js -- "This will print" #!/usr/bin/jjs var whatYouSaid = $ARG.length==0 ? "You did not say anything" : $ARG[0] print(whatYouSaid); Interoperability with Java libraries (including 3rd party dependencies) Another goal of Nashorn was to allow for quick scriptable prototypes, allowing access into Java types and any libraries. Resources operate in the context of the script (either in-line with the script or as separate threads) so if you open network sockets and your script terminates, those sockets will be released and available for your next run. Your code can access Java types the same as regular Java classes. The “import statements” are written somewhat differently to accommodate for language. There is a choice of two styles: For standard classes, just name the class: var ServerSocket = java.net.ServerSocket For arrays or other items, use Java.type: var ByteArray = Java.type("byte[]")You could technically do this for all. The same technique will allow your script to use Java types from any library or 3rd party component and quickly prototype items. Building a user interface One major difference between JavaScript inside and outside of a web browser is the availability of a DOM object for rendering views. When run outside of the browser, JavaScript has full control to construct the entire user interface with pre-fabricated UI controls, charts, or components. The example below is a variation from the Nashorn and JavaFX guide to show how items work together. Nashorn has a -fx flag to make the user interface components available. With the example script below, just specify: jjs -fx -scripting fx.js -- "My title" #!/usr/bin/jjs -fx var Button = javafx.scene.control.Button; var StackPane = javafx.scene.layout.StackPane; var Scene = javafx.scene.Scene; var clickCounter=0; $STAGE.title = $ARG.length>0 ? $ARG[0] : "You didn't provide a title"; var button = new Button(); button.text = "Say 'Hello World'"; button.onAction = myFunctionForButtonClicking; var root = new StackPane(); root.children.add(button); $STAGE.scene = new Scene(root, 300, 250); $STAGE.show(); function myFunctionForButtonClicking(){ var text = "Click Counter: " + clickCounter; button.setText(text); clickCounter++; print(text); } For a more advanced post on using Nashorn to build a high-performing UI, see JavaFX with Nashorn Canvas example. Interoperable with frameworks like Node, Backbone, or Facebook React The major benefit of any language is the interoperability gained by people and systems that can read, write, and use it for interactions. Because Nashorn is built for the ECMAScript specification, developers familiar with JavaScript frameworks can write their code and then have system administrators deploy and monitor the applications the same as any other Java application. A number of projects are also running Node applications on Nashorn through Project Avatar and the supported modules. In addition to the previously mentioned Nashorn tutorial, Benjamin has also written a post about Using Backbone.js with Nashorn. To show the multi-language power of the Java Runtime, there is another interesting example that unites Facebook React and Clojure on JDK 8’s Nashorn. Summary Nashorn provides a simple and fast way of executing JavaScript applications and bridging between the best of each language. By making the full range of Java libraries to JavaScript applications, and the quick prototyping style of JavaScript to Java applications, developers are free to work as they see fit. Software Architects and System Administrators can take advantage of one runtime and leverage any work that they have done to tune, monitor, and certify their systems. Additional information is available within: The Nashorn Users’ Guide Java Magazine’s article "Next Generation JavaScript Engine for the JVM." The Nashorn team’s primary blog or a very helpful collection of Nashorn links.

Read the article

Cost Comparison Hard Disk Drive to Solid State Drive on Price per Gigabyte - dispelling a myth!

- by tonyrogerson

It is often said that Hard Disk Drive storage is significantly cheaper per GiByte than Solid State Devices – this is wholly inaccurate within the database space. People need to look at the cost of the complete solution and not just a single component part in isolation to what is really required to meet the business requirement. Buying a single Hitachi Ultrastar 600GB 3.5” SAS 15Krpm hard disk drive will cost approximately £239.60 (http://scan.co.uk, 22nd March 2012) compared to an OCZ 600GB Z-Drive R4 CM84 PCIe costing £2,316.54 (http://scan.co.uk, 22nd March 2012); I’ve not included FusionIO ioDrive because there is no public pricing available for it – something I never understand and personally when companies do this I immediately think what are they hiding, luckily in FusionIO’s case the product is proven though is expensive compared to OCZ enterprise offerings. On the face of it the single 15Krpm hard disk has a price per GB of £0.39, the SSD £3.86; this is what you will see in the press and this is what sales people will use in comparing the two technologies – do not be fooled by this bullshit people! What is the requirement? The requirement is the database will have a static size of 400GB kept static through archiving so growth and trim will balance the database size, the client requires resilience, there will be several hundred call centre staff querying the database where queries will read a small amount of data but there will be no hot spot in the data so the randomness will come across the entire 400GB of the database, estimates predict that the IOps required will be approximately 4,000IOps at peak times, because it’s a call centre system the IO latency is important and must remain below 5ms per IO. The balance between read and write is 70% read, 30% write. The requirement is now defined and we have three of the most important pieces of the puzzle – space required, estimated IOps and maximum latency per IO. Something to consider with regard SQL Server; write activity requires synchronous IO to the storage media specifically the transaction log; that means the write thread will wait until the IO is completed and hardened off until the thread can continue execution, the requirement has stated that 30% of the system activity will be write so we can expect a high amount of synchronous activity. The hardware solution needs to be defined; two possible solutions: hard disk or solid state based; the real question now is how many hard disks are required to achieve the IO throughput, the latency and resilience, ditto for the solid state. Hard Drive solution On a test on an HP DL380, P410i controller using IOMeter against a single 15Krpm 146GB SAS drive, the throughput given on a transfer size of 8KiB against a 40GiB file on a freshly formatted disk where the partition is the only partition on the disk thus the 40GiB file is on the outer edge of the drive so more sectors can be read before head movement is required: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 3,733 IOps at an average latency of 34.06ms (34 MiB/s). The same test was done on the same disk but the test file was 130GiB: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 528 IOps at an average latency of 217.49ms (4 MiB/s). From the result it is clear random performance gets worse as the disk fills up – I’m currently writing an article on short stroking which will cover this in detail. Given the work load is random in nature looking at the random performance of the single drive when only 40 GiB of the 146 GB is used gives near the IOps required but the latency is way out. Luckily I have tested 6 x 15Krpm 146GB SAS 15Krpm drives in a RAID 0 using the same test methodology, for the same test above on a 130 GiB for each drive added the performance boost is near linear, for each drive added throughput goes up by 5 MiB/sec, IOps by 700 IOps and latency reducing nearly 50% per drive added (172 ms, 94 ms, 65 ms, 47 ms, 37 ms, 30 ms). This is because the same 130GiB is spread out more as you add drives 130 / 1, 130 / 2, 130 / 3 etc. so implicit short stroking is occurring because there is less file on each drive so less head movement required. The best latency is still 30 ms but we have the IOps required now, but that’s on a 130GiB file and not the 400GiB we need. Some reality check here: a) the drive randomness is more likely to be 50/50 and not a full 100% but the above has highlighted the effect randomness has on the drive and the more a drive fills with data the worse the effect. For argument sake let us assume that for the given workload we need 8 disks to do the job, for resilience reasons we will need 16 because we need to RAID 1+0 them in order to get the throughput and the resilience, RAID 5 would degrade performance. Cost for hard drives: 16 x £239.60 = £3,833.60 For the hard drives we will need disk controllers and a separate external disk array because the likelihood is that the server itself won’t take the drives, a quick spec off DELL for a PowerVault MD1220 which gives the dual pathing with 16 disks 146GB 15Krpm 2.5” disks is priced at £7,438.00, note its probably more once we had two controller cards to sit in the server in, racking etc. Minimum cost taking the DELL quote as an example is therefore: {Cost of Hardware} / {Storage Required} £7,438.60 / 400 = £18.595 per GB £18.59 per GiB is a far cry from the £0.39 we had been told by the salesman and the myth. Yes, the storage array is composed of 16 x 146 disks in RAID 10 (therefore 8 usable) giving an effective usable storage availability of 1168GB but the actual storage requirement is only 400 and the extra disks have had to be purchased to get the IOps up. Solid State Drive solution A single card significantly exceeds the IOps and latency required, for resilience two will be required. ( £2,316.54 * 2 ) / 400 = £11.58 per GB With the SSD solution only two PCIe sockets are required, no external disk units, no additional controllers, no redundant controllers etc. Conclusion I hope by showing you an example that the myth that hard disk drives are cheaper per GiB than Solid State has now been dispelled - £11.58 per GB for SSD compared to £18.59 for Hard Disk. I’ve not even touched on the running costs, compare the costs of running 18 hard disks, that’s a lot of heat and power compared to two PCIe cards!Just a quick note: I've left a fair amount of information out due to this being a blog! If in doubt, email me :)I'll also deal with the myth that SSD's wear out at a later date as well - that's just way over done still, yes, 5 years ago, but now - no.

Read the article

Self-signed certificates for a known community

- by costlow

Recently announced changes scheduled for Java 7 update 51 (January 2014) have established that the default security slider will require code signatures and the Permissions Manifest attribute. Code signatures are a common practice recommended in the industry because they help determine that the code your computer will run is the same code that the publisher created. This post is written to help users that need to use self-signed certificates without involving a public Certificate Authority. The role of self-signed certificates within a known community You may still use self-signed certificates within a known community. The difference between self-signed and purchased-from-CA is that your users must import your self-signed certificate to indicate that it is valid, whereas Certificate Authorities are already trusted by default. This works for known communities where people will trust that my certificate is mine, but does not scale widely where I cannot actually contact or know the systems that will need to trust my certificate. Public Certificate Authorities are widely trusted already because they abide by many different requirements and frequent checks. An example would be students in a university class sharing their public certificates on a mailing list or web page, employees publishing on the intranet, or a system administrator rolling certificates out to end-users. Managed machines help this because you can automate the rollout, but they are not required -- the major point simply that people will trust and import your certificate. How to distribute self-signed certificates for a known community There are several steps required to distribute a self-signed certificate to users so that they will properly trust it. These steps are: Creating a public/private key pair for signing. Exporting your public certificate for others Importing your certificate onto machines that should trust you Verify work on a different machine Creating a public/private key pair for signing Having a public/private key pair will give you the ability both to sign items yourself and issue a Certificate Signing Request (CSR) to a certificate authority. Create your public/private key pair by following the instructions for creating key pairs.Every Certificate Authority that I looked at provided similar instructions, but for the sake of cohesiveness I will include the commands that I used here: Generate the key pair.keytool -genkeypair -alias erikcostlow -keyalg EC -keysize 571 -validity 730 -keystore javakeystore_keepsecret.jks Provide a good password for this file. The alias "erikcostlow" is my name and therefore easy to remember. Substitute your name of something like "mykey." The sigalg of EC (Elliptical Curve) and keysize of 571 will give your key a good strong lifetime. All keys are set to expire. Two years or 730 days is a reasonable compromise between not-long-enough and too-long. Most public Certificate Authorities will sign something for one to five years. You will be placing your keys in javakeystore_keepsecret.jks -- this file will contain private keys and therefore should not be shared. If someone else gets these private keys, they can impersonate your signature. Please be cautious about automated cloud backup systems and private key stores. Answer all the questions. It is important to provide good answers because you will stick with them for the "-validity" days that you specified above.What is your first and last name? [Unknown]: First LastWhat is the name of your organizational unit? [Unknown]: Line of BusinessWhat is the name of your organization? [Unknown]: MyCompanyWhat is the name of your City or Locality? [Unknown]: City NameWhat is the name of your State or Province? [Unknown]: CAWhat is the two-letter country code for this unit? [Unknown]: USIs CN=First Last, OU=Line of Business, O=MyCompany, L=City, ST=CA, C=US correct? [no]: yesEnter key password for <erikcostlow> (RETURN if same as keystore password): Verify your work:keytool -list -keystore javakeystore_keepsecret.jksYou should see your new key pair. Exporting your public certificate for others Public Key Infrastructure relies on two simple concepts: the public key may be made public and the private key must be private. By exporting your public certificate, you are able to share it with others who can then import the certificate to trust you. keytool -exportcert -keystore javakeystore_keepsecret.jks -alias erikcostlow -file erikcostlow.cer To verify this, you can open the .cer file by double-clicking it on most operating systems. It should show the information that you entered during the creation prompts. This is the file that you will share with others. They will use this certificate to prove that artifacts signed by this certificate came from you. If you do not manage machines directly, place the certificate file on an area that people within the known community should trust, such as an intranet page. Import the certificate onto machines that should trust you In order to trust the certificate, people within your known network must import your certificate into their keystores. The first step is to verify that the certificate is actually yours, which can be done through any band: email, phone, in-person, etc. Known networks can usually do this Determine the right keystore: For an individual user looking to trust another, the correct file is within that user’s directory.e.g. USER_HOME\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs For system-wide installations, Java’s Certificate Authorities are in JAVA_HOMEe.g. C:\Program Files\Java\jre8\lib\security\cacerts File paths for Mac and Linux are included in the link above. Follow the instructions to import the certificate into the keystore. keytool -importcert -keystore THEKEYSTOREFROMABOVE -alias erikcostlow -file erikcostlow.cer In this case, I am still using my name for the alias because it’s easy for me to remember. You may also use an alias of your company name. Scaling distribution of the import The easiest way to apply your certificate across many machines is to just push the .certs or cacerts file onto them. When doing this, watch out for any changes that people would have made to this file on their machines. Trusted.certs: When publishing into user directories, your file will overwrite any keys that the user has added since last update. CACerts: It is best to re-run the import command with each installation rather than just overwriting the file. If you just keep the same cacerts file between upgrades, you will overwrite any CAs that have been added or removed. By re-importing, you stay up to date with changes. Verify work on a different machine Verification is a way of checking on the client machine to ensure that it properly trusts signed artifacts after you have added your signing certificate. Many people have started using deployment rule sets. You can validate the deployment rule set by: Create and sign the deployment rule set on the computer that holds the private key. Copy the deployment rule set on to the different machine where you have imported the signing certificate. Verify that the Java Control Panel’s security tab shows your deployment rule set. Verifying an individual JAR file or multiple JAR files You can test a certificate chain by using the jarsigner command. jarsigner -verify filename.jar If the output does not say "jar verified" then run the following command to see why: jarsigner -verify -verbose -certs filename.jar Check the output for the term “CertPath not validated.”

Read the article

Know More About Oracle Row Lock

- by Liu Maclean(???)

??????Oracle??????????row lock,??ORACLE????????????????????,row lock???????????????????????????????,??Server Process?pin????block buffer????????? ????????,?process A ??update???????? Z?????????, ???????rollback???commit;??Process B??????DML??, ???????rowid???? Z???, ???????????process A????????ITL???,????????cleanout??,????????row???????????commit, ???????Process B????”enq: TX – row lock contention”??????? ????Process B????????????? ?????????Process A???????row,??Process B???????”enq: TX – row lock contention”???? ???????? ????????: SESSION A: SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create table maclean_lock(t1 int); Table created. SQL> insert into maclean_lock values (1); 1 row created. SQL> commit; Commit complete. SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from maclean_lock; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------ 67642 1 SQL> select distinct sid from v$mystat; SID ---------- 142 SQL> select pid,spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); PID SPID ---------- ------------ 17 15636 ??SESSION A ????savepoint ,?update ????????? SQL> savepoint NONLOCK; Savepoint created. SQL> select * From v$Lock where sid=142; no rows selected SQL> set linesize 140 pagesize 1400 SQL> update maclean_lock set t1=t1+2; 1 row updated. SQL> select * From v$Lock where sid=142; ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 0000000091FC69F0 0000000091FC6A18 142 TM 55829 0 3 0 6 0 00000000914B4008 00000000914B4040 142 TX 393232 609 6 0 6 0 SQL> select dump(3,16) from dual; DUMP(3,16) -------------------------------------------------------------------------------- Typ=2 Len=2: c1,4 ALTER SYSTEM DUMP DATAFILE 1 BLOCK 67642; Object id on Block? Y seg/obj: 0xda16 csc: 0x00.234718 itc: 2 flg: O typ: 1 - DATA fsl: 0 fnx: 0x0 ver: 0x01 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0x000a.00f.000001e0 0x00800075.02a6.29 C--- 0 scn 0x0000.00234711 0x02 0x0007.018.000001fe 0x0080065c.017a.02 ---- 1 fsc 0x0000.00000000 data_block_dump,data header at 0x81d185c =============== tsiz: 0x1fa0 hsiz: 0x14 pbl: 0x081d185c bdba: 0x0041083a 76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f9a avsp=0x1f83 tosp=0x1f83 0xe:pti[0] nrow=1 offs=0 0x12:pri[0] offs=0x1f9a block_row_dump: tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x2 cc: 1 col 0: [ 2] c1 04 end_of_block_dump ?? BLOCK DUMP ???? ??????XID=0x0007.018.000001fe ?transaction?? lb:0x1 ??SESSION B ,?????UPDATE?? ???enq: TX - row lock contention ?? SQL> select distinct sid from v$mystat; SID ---------- 140 SQL> select pid,spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); PID SPID ---------- ------------ 24 15652 SQL> alter system set "_trace_events"='10000-10999:255:24'; System altered. SQL> update maclean_lock set t1=t1+2; select * From v$Lock where sid=142 or sid=140 order by sid; SESSION C: SQL> select * From v$Lock where sid=142 or sid=140 order by sid; ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 0000000091FC6B10 0000000091FC6B38 140 TM 55829 0 3 0 84 0 00000000924F4A58 00000000924F4A78 140 TX 458776 510 0 6 84 0 00000000914B51E8 00000000914B5220 142 TX 458776 510 6 0 312 1 0000000091FC69F0 0000000091FC6A18 142 TM 55829 0 3 0 312 0 ???? SESSION B SID=140 ?SESSION A ?TX ENQUEUE ?X mode?REQUEST SQL> oradebug dump systemstate 266; Statement processed. SESSION B waiter's enqueue lock SO: 0x924f4a58, type: 5, owner: 0x92bb8dc8, flag: INIT/-/-/0x00 (enqueue) TX-00070018-000001FE DID: 0001-0018-00000022 lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x6 req: X, lock_flag: 0x0, lock: 0x924f4a78, res: 0x925617c0 own: 0x92b76be0, sess: 0x92b76be0, proc: 0x92a737a0, prv: 0x925617e0 TX-00070018-000001FE=> TX 458776 510 SESSION A owner's enqueue lock SO: 0x914b51e8, type: 40, owner: 0x92b796d0, flag: INIT/-/-/0x00 (trans) flg = 0x1e03, flg2 = 0xc0000, prx = 0x0, ros = 2147483647 bsn = 0xed5 bndsn = 0xee7 spn = 0xef7 efd = 3 file:xct.c lineno:1179 DID: 0001-0011-000000C2 parent xid: 0x0000.000.00000000 env: (scn: 0x0000.00234718 xid: 0x0007.018.000001fe uba: 0x0080065c.017a.02 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x00 00.00234718 0sch: scn: 0x0000.00000000) cev: (spc = 7818 arsp = 914e8310 ubk tsn: 1 rdba: 0x0080065c useg tsn: 1 rdba: 0x00800069 hwm uba: 0x0080065c.017a.02 col uba: 0x00000000.0000.00 num bl: 1 bk list: 0x91435070) cr opc: 0x0 spc: 7818 uba: 0x0080065c.017a.02 (enqueue) TX-00070018-000001FE DID: 0001-0011-000000C2 lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x6 mode: X, lock_flag: 0x0, lock: 0x914b5220, res: 0x925617c0 own: 0x92b796d0, sess: 0x92b796d0, proc: 0x92a6ffd8, prv: 0x925617d0 xga: 0x8b7c6d40, heap: UGA Trans IMU st: 2 Pool index 65535, Redo pool 0x914b58d0, Undo pool 0x914b59b8 Redo pool range [0x86de640 0x86de640 0x86e0e40] Undo pool range [0x86dbe40 0x86dbe40 0x86de640] ---------------------------------------- SO: 0x91435070, type: 39, owner: 0x914b51e8, flag: -/-/-/0x00 (List of Blocks) next index = 1 index itli buffer hint rdba savepoint ----------------------------------------------------------- 0 2 0x647f1fc8 0x41083a 0xee7 ?SESSION A? ROLLBACK ?savepoint: SQL> rollback to NONLOCK; Rollback complete. ????savepoint ??update??????? ??UPDATE???????? ROLLBACK: SQL> select * From v$Lock where sid=142 or sid=140; ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 00000000924F4A58 00000000924F4A78 140 TX 458776 510 0 6 822 0 0000000091FC6B10 0000000091FC6B38 140 TM 55829 0 3 0 822 0 00000000914B51E8 00000000914B5220 142 TX 458776 510 6 0 1050 1 ???? SESSION A 142 ???SAVEPOINT ???????TM LOCK ????? ROLLBACK TO SAVEPOINT?????SESSION???TX LOCK!!!! ??????SESSION 142???TX ID1=458776 ID2=510, ????ROLLBACK TO SAVEPOINT?????????ABORT TRANSACTION ?? SESSION B SID=140?? SESSION A ?? , ?????????SESSION B? update???HANG?? ?????????CACHE?????: Object id on Block? Y seg/obj: 0xda16 csc: 0x00.2347b7 itc: 2 flg: O typ: 1 - DATA fsl: 0 fnx: 0x0 ver: 0x01 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0x000a.00f.000001e0 0x00800075.02a6.29 C--- 0 scn 0x0000.00234711 0x02 0x0000.000.00000000 0x00000000.0000.00 ---- 0 fsc 0x0000.00000000 data_block_dump,data header at 0x745d85c =============== tsiz: 0x1fa0 hsiz: 0x14 pbl: 0x0745d85c bdba: 0x0041083a 76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f9a avsp=0x1f83 tosp=0x1f83 0xe:pti[0] nrow=1 offs=0 0x12:pri[0] offs=0x1f9a block_row_dump: tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0 cc: 1 col 0: [ 2] c1 02 end_of_block_dump ???? ITL=0x02? ?????????,col 0: [ 2] c1 02 ????????? ?????????SESSION D ,??????row lock?? ?UPDATE???????? SESSION D: SQL> update maclean_lock set t1=t1+2; 1 row updated. SQL> rollback; Rollback complete. ??SESSION B ??????????? ?????ORACLE????????, ??????????? TX lock?? row lock , ????????2??? row lock?????????, ?TX lock????????ENQUEUE LOCK???? ?????????PROCESS K?DML???????????????????????,??????????TX LOCK, ????PROCESS Z?????????????????????????ROW LOCK????????, ???????OLTP?????????????????????? ??ROW LOCK?Release ??????TX?ENQUEUE LOCK,?????????Process J ????????????, Process K??????????? ,Process K?????????,???row piece?lb??0x0 ,?????ITL, Process Z???ITL???????Process J????XID,?????Process J?????TX lock, PROCESS K ???TX resource?Enqueue Waiter Linked List?????X mode(exclusive)?enqueue lock? ???Process J??TX lock?,Process J?????TX resource?Enqueue Waiter Linked List ???Process K??????,??POST?????Process K? TX lock??????, ???????row lock???????,????????? ?????????? ?????: SESSION A ???PID =17 ?????????????????? SESSION B ???PID =24 ??????? "_trace_events"='10000-10999:255:24'; KST trace ??????? Server Process??? SESSION A PID=17 ?? acqure?SX mode???TM Lock ,?? ????Transaction?????UNDO SEGMENT 7,???XID 7.24.510, ?acquire ?X mode? TX-00070018-000001fe ? ?????? 00070018-000001fe ???? 7- 24 - 510? XID ? 781F4B8A:007A569C 17 142 10704 83 ksqgtl: acquire TM-0000da15-00000000 mode=SX flags=GLOBAL|XACT why="contention" 781F4B92:007A569D 17 142 10704 19 ksqgtl: SUCCESS 781F4BB3:007A569E 17 142 10812 2 0x000000000041083A 0x0000000000000000 0x0000000000234717 781F4BBA:007A569F 17 142 10812 3 0x0000000000000000 0x0000000000000000 0x0000000000000000 781F4BC0:007A56A0 17 142 10812 4 0x0000000000000000 0x0000000000000000 0x0000000000000000 781F4BD3:007A56A1 17 142 10812 5 0x000000000041083A 0x0000000000000000 0x0000000000000000 781F4BFE:007A56A2 17 142 10811 1 0x000000000041083A 0x0000000000000000 0x0000000000234711 0x0000000000000002 781F4C06:007A56A3 17 142 10811 2 0x000000000041083A 0x0000000000000000 0x0000000000234718 0x00007FA074EDA560 781F4C26:007A56A4 17 142 10813 1 ktubnd: Bind usn 7 nax 1 nbx 0 lng 0 par 0 781F4C43:007A56A5 17 142 10813 2 ktubnd: Txn Bound xid: 7.24.510 781F4C4A:007A56A6 17 142 10704 83 ksqgtl: acquire TX-00070018-000001fe mode=X flags=GLOBAL|XACT why="contention" 781F4C51:007A56A7 17 142 10704 19 ksqgtl: SUCCESS ?????????? ???????? 781F4CBF:007A56A8 17 142 10005 1 KSL WAIT BEG [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 781F4CCC:007A56A9 17 142 10005 2 KSL WAIT END [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 time=13 781F4CDE:007A56AA 17 142 10005 1 KSL WAIT BEG [SQL*Net message from client] 1650815232/0x62657100 1/0x1 0/0x0 786BD85D:007A57E0 17 142 10005 2 KSL WAIT END [SQL*Net message from client] 1650815232/0x62657100 1/0x1 0/0x0 time=5016447 786BD966:007A57E1 17 142 10005 1 KSL WAIT BEG [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 786BD96E:007A57E2 17 142 10005 2 KSL WAIT END [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 time=8 SESSION B ???PID =24 ,??????? SX mode? TM lock,??row lock? acquire X mode?TX-00070018-000001fe ksqgtl: acquire TM-0000da15-00000000 mode=SX flags=GLOBAL|XACT why="contention" ksqgtl: SUCCESS 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000000000001 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000008A63780 0x0000000000000001 0x0000000000800861 0x0000000000000241 0x0000000000000001 0x000000000041083A 0x0000000000000001 0x0000000000000001 0x000000000041083A 0x0000000000000000 0x00000000002354F9 0x0000000000000002 ksqgtl: acquire TX-00070018-000001fe mode=X flags=GLOBAL|LONG why="row lock contention" C4048EBD:007F52B6 24 140 10005 2 KSL WAIT END [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe time=2929879 C4048ED4:007F52B7 24 140 10005 1 KSL WAIT BEG [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe C43146CA:007F535E 24 140 10005 2 KSL WAIT END [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe time=2930676 ????????? ,PID=24 ??????ksqcmi???????? deadlock C43146D9:007F535F 24 140 10704 134 ksqcmi: performing local deadlock detection on TX-00070018-000001fe C43146F8:007F5360 24 140 10704 150 ksqcmi: deadlock not detected on TX-00070018-000001fe ?? ??? PID 17 ??ROLLBACK ???? ,????????: PID 17 ROLLBACK; D7A495BB:007F9D3E 17 142 10005 4 KSL POST SENT postee=24 loc='ksqrcl' id1=0 id2=0 name= type=0 D7A495D8:007F9D3F 17 142 10444 12 ABORT TRANSACTION - xid: 0x0007.018.000001fe ?? PID 17 ??? TX resource?Enqueue Waiter linked List ???PID 24???,????KSL POST SENT ?? PID 24, ???ksqrcl???ENQUEUE LOCK ?PID 24??????KSL POST (KSL POST RCVD poster=17), ?ksqgtl???? TX-00070018-000001fe ?? ksqrcl??, ??PID 24???????? TX lock?USN ,??????? USN 3 XID 3.11.582 ,???acquire TX-0003000b-00000246 D7A49616:007F9D41 24 140 10005 3 KSL POST RCVD poster=17 loc='ksqrcl' id1=0 id2=0 name= type=0 fac#=0 facpost=1 D7A4961C:007F9D42 24 140 10704 19 ksqgtl: SUCCESS D7A4967D:007F9D43 24 140 10704 117 ksqrcl: release TX-00070018-000001fe mode=X D7A496A5:007F9D44 24 140 10813 1 ktubnd: Bind usn 3 nax 1 nbx 0 lng 0 par 0 D7A496C2:007F9D45 24 140 10813 2 ktubnd: Txn Bound xid: 3.11.582 D7A496C7:007F9D46 24 140 10704 83 ksqgtl: acquire TX-0003000b-00000246 mode=X flags=GLOBAL|XACT why="contention" D7A496E4:007F9D47 24 140 10704 19 ksqgtl: SUCCESS ROW LOCK?Release ??????TX?ENQUEUE LOCK,?????????Process J ????????????, Process K??????????? ,Process K?????????,???row piece?lb??0×0 ,?????ITL,Process Z???ITL???????Process J????XID,?????Process J?????TX lock,PROCESS K ???TX resource?Enqueue Waiter Linked List?????X mode(exclusive)?enqueue lock? ???Process J??TX lock?,Process J?????TX resource?Enqueue Waiter Linked List ???Process K??????,??POST?????Process K? TX lock??????,???????row lock???????,?????????

Read the article

Small adventure game

- by Nick Rosencrantz

I'm making a small adventure game where the player can walk through Dungeons and meet scary characters: The whole thing is 20 java classes and I'm making this a standalone frame while it could very well be an applet I don't want to make another applet since I might want to recode this in C/C++ if the game or game engine turns out a success. The engine is the most interesting part of the game, it controls players and computer-controlled characters such as Zombies, Reptile Warriors, Trolls, Necromancers, and other Persons. These persons can sleep or walk around in the game and also pick up and move things. I didn't add many things so I suppose that is the next thing to do is to add things that can get used now that I already added many different types of walking persons. What do you think I should add and do with things in the game? The things I have so far is: package adventure; /** * The data type for things. Subclasses will be create that takes part of the story */ public class Thing { /** * The name of the Thing. */ public String name; /** * @param name The name of the Thing. */ Thing( String name ) { this.name = name; } } public class Scroll extends Thing { Scroll (String name) { super(name); } } class Key extends Thing { Key (String name) { super(name); } } The key is the way to win the game if you figure our that you should give it to a certain person and the scroll can protect you from necromancers and trolls. If I make this game more Dungeons and Dragons-inspired, do you think will be any good? Any other ideas that you think I could use here? The Threadwhich steps time forward and wakes up persons is called simulation. Do you think I could do something more advanced with this class? package adventure; class Simulation extends Thread { private PriorityQueue Eventqueue; Simulation() { Eventqueue = new PriorityQueue(); start(); } public void wakeMeAfter(Wakeable SleepingObject, double time) { Eventqueue.enqueue(SleepingObject, System.currentTimeMillis()+time); } public void run() { while(true) { try { sleep(5); //Sov i en halv sekund if (Eventqueue.getFirstTime() <= System.currentTimeMillis()) { ((Wakeable)Eventqueue.getFirst()).wakeup(); Eventqueue.dequeue(); } } catch (InterruptedException e ) { } } } } And here is the class that makes up the actual world: package adventure; import java.awt.*; import java.net.URL; /** * Subklass to World that builds up the Dungeon World. */ public class DungeonWorld extends World { /** * * @param a Reference to adventure game. * */ public DungeonWorld(Adventure a) { super ( a ); // Create all places createPlace( "Himlen" ); createPlace( "Stairs3" ); createPlace( "IPLab" ); createPlace( "Dungeon3" ); createPlace( "Stairs5" ); createPlace( "C2M2" ); createPlace( "SANS" ); createPlace( "Macsal" ); createPlace( "Stairs4" ); createPlace( "Dungeon2" ); createPlace( "Datorsalen" ); createPlace( "Dungeon");//, "Ljushallen.gif" ); createPlace( "Cola-automaten", "ColaAutomat.gif" ); createPlace( "Stairs2" ); createPlace( "Fable1" ); createPlace( "Dungeon1" ); createPlace( "Kulverten" ); // Create all connections between places connect( "Stairs3", "Stairs5", "Down", "Up" ); connect( "Dungeon3", "SANS", "Down", "Up" ); connect( "Dungeon3", "IPLab", "West", "East" ); connect( "IPLab", "Stairs3", "West", "East" ); connect( "Stairs5", "Stairs4", "Down", "Up" ); connect( "Macsal", "Stairs5", "South", "Norr" ); connect( "C2M2", "Stairs5", "West", "East" ); connect( "SANS", "C2M2", "West", "East" ); connect( "Stairs4", "Dungeon", "Down", "Up" ); connect( "Datorsalen", "Stairs4", "South", "Noth" ); connect( "Dungeon2", "Stairs4", "West", "East" ); connect( "Dungeon", "Stairs2", "Down", "Up" ); connect( "Dungeon", "Cola-automaten", "South", "North" ); connect( "Stairs2", "Kulverten", "Down", "Up" ); connect( "Stairs2", "Fable1", "East", "West" ); connect( "Fable1", "Dungeon1", "South", "North" ); // Add things // --- Add new things here --- getPlace("Cola-automaten").addThing(new CocaCola("Ljummen cola")); getPlace("Cola-automaten").addThing(new CocaCola("Avslagen Cola")); getPlace("Cola-automaten").addThing(new CocaCola("Iskall Cola")); getPlace("Cola-automaten").addThing(new CocaCola("Cola Light")); getPlace("Cola-automaten").addThing(new CocaCola("Cuba Cola")); getPlace("Stairs4").addThing(new Scroll("Scroll")); getPlace("Dungeon3").addThing(new Key("Key")); Simulation sim = new Simulation(); // Load images to be used as appearance-parameter for persons Image studAppearance = owner.loadPicture( "Person.gif" ); Image asseAppearance = owner.loadPicture( "Asse.gif" ); Image trollAppearance = owner.loadPicture( "Loke.gif" ); Image necromancerAppearance = owner.loadPicture( "Necromancer.gif" ); Image skeletonAppearance = owner.loadPicture( "Reptilewarrior.gif" ); Image reptileAppearance = owner.loadPicture( "Skeleton.gif" ); Image zombieAppearance = owner.loadPicture( "Zombie.gif" ); // --- Add new persons here --- new WalkingPerson(sim, this, "Peter", studAppearance); new WalkingPerson(sim, this, "Zombie", zombieAppearance ); new WalkingPerson(sim, this, "Zombie", zombieAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "John", studAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Sean", studAppearance ); new WalkingPerson(sim, this, "Reptile", reptileAppearance ); new LabAssistant(sim, this, "Kate", asseAppearance); new LabAssistant(sim, this, "Jenna", asseAppearance); new Troll(sim, this, "Troll", trollAppearance); new Necromancer(sim, this, "Necromancer", necromancerAppearance); } /** * * The place where persons are placed by default * *@return The default place. * */ public Place defaultPlace() { return getPlace( "Datorsalen" ); } private void connect( String p1, String p2, String door1, String door2) { Place place1 = getPlace( p1 ); Place place2 = getPlace( p2 ); place1.addExit( door1, place2 ); place2.addExit( door2, place1 ); } } Thanks

Read the article

3D picking lwjgl

- by Wirde

I have written some code to preform 3D picking that for some reason dosn't work entirely correct! (Im using LWJGL just so you know.) I posted this at stackoverflow at first but after researching some more in to my problem i found this neat site and tought that you guys might be more qualified to answer this question. This is how the code looks like: if(Mouse.getEventButton() == 1) { if (!Mouse.getEventButtonState()) { Camera.get().generateViewMatrix(); float screenSpaceX = ((Mouse.getX()/800f/2f)-1.0f)*Camera.get().getAspectRatio(); float screenSpaceY = 1.0f-(2*((600-Mouse.getY())/600f)); float displacementRate = (float)Math.tan(Camera.get().getFovy()/2); screenSpaceX *= displacementRate; screenSpaceY *= displacementRate; Vector4f cameraSpaceNear = new Vector4f((float) (screenSpaceX * Camera.get().getNear()), (float) (screenSpaceY * Camera.get().getNear()), (float) (-Camera.get().getNear()), 1); Vector4f cameraSpaceFar = new Vector4f((float) (screenSpaceX * Camera.get().getFar()), (float) (screenSpaceY * Camera.get().getFar()), (float) (-Camera.get().getFar()), 1); Matrix4f tmpView = new Matrix4f(); Camera.get().getViewMatrix().transpose(tmpView); Matrix4f invertedViewMatrix = (Matrix4f)tmpView.invert(); Vector4f worldSpaceNear = new Vector4f(); Matrix4f.transform(invertedViewMatrix, cameraSpaceNear, worldSpaceNear); Vector4f worldSpaceFar = new Vector4f(); Matrix4f.transform(invertedViewMatrix, cameraSpaceFar, worldSpaceFar); Vector3f rayPosition = new Vector3f(worldSpaceNear.x, worldSpaceNear.y, worldSpaceNear.z); Vector3f rayDirection = new Vector3f(worldSpaceFar.x - worldSpaceNear.x, worldSpaceFar.y - worldSpaceNear.y, worldSpaceFar.z - worldSpaceNear.z); rayDirection.normalise(); Ray clickRay = new Ray(rayPosition, rayDirection); Vector tMin = new Vector(), tMax = new Vector(), tempPoint; float largestEnteringValue, smallestExitingValue, temp, closestEnteringValue = Camera.get().getFar()+0.1f; Drawable closestDrawableHit = null; for(Drawable d : this.worldModel.getDrawableThings()) { // Calcualte AABB for each object... needs to be moved later... firstVertex = true; for(Surface surface : d.getSurfaces()) { for(Vertex v : surface.getVertices()) { worldPosition.x = (v.x+d.getPosition().x)*d.getScale().x; worldPosition.y = (v.y+d.getPosition().y)*d.getScale().y; worldPosition.z = (v.z+d.getPosition().z)*d.getScale().z; worldPosition = worldPosition.rotate(d.getRotation()); if (firstVertex) { maxX = worldPosition.x; maxY = worldPosition.y; maxZ = worldPosition.z; minX = worldPosition.x; minY = worldPosition.y; minZ = worldPosition.z; firstVertex = false; } else { if (worldPosition.x > maxX) { maxX = worldPosition.x; } if (worldPosition.x < minX) { minX = worldPosition.x; } if (worldPosition.y > maxY) { maxY = worldPosition.y; } if (worldPosition.y < minY) { minY = worldPosition.y; } if (worldPosition.z > maxZ) { maxZ = worldPosition.z; } if (worldPosition.z < minZ) { minZ = worldPosition.z; } } } } // ray/slabs intersection test... // clickRay.getOrigin().x + clickRay.getDirection().x * f = minX // clickRay.getOrigin().x - minX = -clickRay.getDirection().x * f // clickRay.getOrigin().x/-clickRay.getDirection().x - minX/-clickRay.getDirection().x = f // -clickRay.getOrigin().x/clickRay.getDirection().x + minX/clickRay.getDirection().x = f largestEnteringValue = -clickRay.getOrigin().x/clickRay.getDirection().x + minX/clickRay.getDirection().x; temp = -clickRay.getOrigin().y/clickRay.getDirection().y + minY/clickRay.getDirection().y; if(largestEnteringValue < temp) { largestEnteringValue = temp; } temp = -clickRay.getOrigin().z/clickRay.getDirection().z + minZ/clickRay.getDirection().z; if(largestEnteringValue < temp) { largestEnteringValue = temp; } smallestExitingValue = -clickRay.getOrigin().x/clickRay.getDirection().x + maxX/clickRay.getDirection().x; temp = -clickRay.getOrigin().y/clickRay.getDirection().y + maxY/clickRay.getDirection().y; if(smallestExitingValue > temp) { smallestExitingValue = temp; } temp = -clickRay.getOrigin().z/clickRay.getDirection().z + maxZ/clickRay.getDirection().z; if(smallestExitingValue < temp) { smallestExitingValue = temp; } if(largestEnteringValue > smallestExitingValue) { //System.out.println("Miss!"); } else { if (largestEnteringValue < closestEnteringValue) { closestEnteringValue = largestEnteringValue; closestDrawableHit = d; } } } if(closestDrawableHit != null) { System.out.println("Hit at: (" + clickRay.setDistance(closestEnteringValue).x + ", " + clickRay.getCurrentPosition().y + ", " + clickRay.getCurrentPosition().z); this.worldModel.removeDrawableThing(closestDrawableHit); } } } I just don't understand what's wrong, the ray are shooting and i do hit stuff that gets removed but the result of the ray are verry strange it sometimes removes the thing im clicking at, sometimes it removes things thats not even close to what im clicking at, and sometimes it removes nothing at all. Edit: Okay so i have continued searching for errors and by debugging the ray (by painting smal dots where it travles) i can now se that there is something oviously wrong with the ray that im sending out... it has its origin near the world center (nearer or further away depending on where on the screen im clicking) and always shots to the same position no matter where I direct my camera... My initial toughts is that there might be some error in the way i calculate my viewMatrix (since it's not possible to get the viewmatrix from the gluLookAt method in lwjgl; I have to build it my self and I guess thats where the problem is at)... Edit2: This is how i calculate it currently: private double[][] viewMatrixDouble = {{0,0,0,0}, {0,0,0,0}, {0,0,0,0}, {0,0,0,1}}; public Vector getCameraDirectionVector() { Vector actualEye = this.getActualEyePosition(); return new Vector(lookAt.x-actualEye.x, lookAt.y-actualEye.y, lookAt.z-actualEye.z); } public Vector getActualEyePosition() { return eye.rotate(this.getRotation()); } public void generateViewMatrix() { Vector cameraDirectionVector = getCameraDirectionVector().normalize(); Vector side = Vector.cross(cameraDirectionVector, this.upVector).normalize(); Vector up = Vector.cross(side, cameraDirectionVector); viewMatrixDouble[0][0] = side.x; viewMatrixDouble[0][1] = up.x; viewMatrixDouble[0][2] = -cameraDirectionVector.x; viewMatrixDouble[1][0] = side.y; viewMatrixDouble[1][1] = up.y; viewMatrixDouble[1][2] = -cameraDirectionVector.y; viewMatrixDouble[2][0] = side.z; viewMatrixDouble[2][1] = up.z; viewMatrixDouble[2][2] = -cameraDirectionVector.z; /* Vector actualEyePosition = this.getActualEyePosition(); Vector zaxis = new Vector(this.lookAt.x - actualEyePosition.x, this.lookAt.y - actualEyePosition.y, this.lookAt.z - actualEyePosition.z).normalize(); Vector xaxis = Vector.cross(upVector, zaxis).normalize(); Vector yaxis = Vector.cross(zaxis, xaxis); viewMatrixDouble[0][0] = xaxis.x; viewMatrixDouble[0][1] = yaxis.x; viewMatrixDouble[0][2] = zaxis.x; viewMatrixDouble[1][0] = xaxis.y; viewMatrixDouble[1][1] = yaxis.y; viewMatrixDouble[1][2] = zaxis.y; viewMatrixDouble[2][0] = xaxis.z; viewMatrixDouble[2][1] = yaxis.z; viewMatrixDouble[2][2] = zaxis.z; viewMatrixDouble[3][0] = -Vector.dot(xaxis, actualEyePosition); viewMatrixDouble[3][1] =-Vector.dot(yaxis, actualEyePosition); viewMatrixDouble[3][2] = -Vector.dot(zaxis, actualEyePosition); */ viewMatrix = new Matrix4f(); viewMatrix.load(getViewMatrixAsFloatBuffer()); } Would be verry greatfull if anyone could verify if this is wrong or right, and if it's wrong; supply me with the right way of doing it... I have read alot of threads and documentations about this but i can't seam to wrapp my head around it... Edit3: Okay with the help of Byte56 (thanks alot for the help) i have now concluded that it's not the viewMatrix that is the problem... I still get the same messedup result; anyone that think that they can find the error in my code, i certenly can't, have bean working on this for 3 days now :(

Read the article

Configuring Oracle HTTP Server 12c for WebLogic Server Domain

- by Emin Askerov

Oracle HTTP Server (OHS) 12c 12.1.2 which was released in July 2013 as a part of Oracle Web Tier 12c is the web server component of Oracle Fusion Middleware. In essence this is Apache HTTP Server 2.2.22 (with critical bug fixes from higher versions) which includes modules developed specifically by Oracle. It provides a listener functionality for Oracle WebLogic Server and the framework for hosting static pages, dynamic pages, and applications over the Web. OHS can be easily managed by Weblogic Management Framework, a set of tools which provides administrative capabilities (start, stop, lifecycle operations, etc.) for Oracle Fusion Middleware products. In other words all tools which are familiar to us (Node Manager, WLST, Administration Console, Fusion Middleware Control etc.) presented as a part of Weblogic Management Framework and using for managing Java and System Components both for Weblogic Server and Standalone Domain types. You can familiarize yourself with these terms using related documentation: 1. Introduction to Oracle HTTP Server: http://docs.oracle.com/middleware/1212/webtier/index.html 2. Weblogic Management Framework: http://docs.oracle.com/middleware/1212/core/ASCON/terminology.htm#ASCON11260 In the given post I would like to cover rather simple use case how to configure OHS as web proxy in Weblogic Cluster environment. For example, we have existing Weblogic Domain where some managed servers have been joined to cluster and host business applications. We need to configure web proxy component which will act as entry point, load balancer for our cluster for user requests. Of course, we could install old good Apache HTTP Server and configure mod_wl plugin. However this solution not optimal from manageability perspective: we need to install Apache, install additional plugin then configure it by editing configuration file which is not really convenient for FMW Administrators and often increase time of performing of simple administrative task. Alternatively, we could use OHS as System Component within Weblogic Domain and use full power of Weblogic Management Framework in order to configure, manage and monitor it! I like this idea! What about you? I hope after reading this post you will agree with me. First of all it is necessary to download OHS binaries. You can use this link for downloading: http://www.oracle.com/technetwork/java/webtier/downloads/index2-303202.html As we will use Fusion Middleware Control for managing OHS instances it is necessary to extend your domain with Enterprise Manager and Oracle ADF and JRF templates. This is not topic for focusing in this post, but you could get more information from documentation or one of my previous posts: http://docs.oracle.com/middleware/1212/wls/WLDTR/fmw_templates.htm#sthref64 https://blogs.oracle.com/imc/entry/the_specifics_of_adf_12c Note: you should have properly configured Node Manager utility for managing OHS instances Let’s consider configuration process step by step: 1. Shut down all Weblogic instances of existing domain including Admin Server; 2. Install Oracle HTTP Server. You should use your Fusion Middleware Home Path (e.g. /u01/Oracle/FMW12) for Installation Location and select Colocated HTTP Server option as Installation Type. I will not focus on this topic in this post. All information related to OHS installation you could find here: http://docs.oracle.com/middleware/1212/webtier/WTINS/install_gui.htm#i1082009 3. Next we need to extend our existing domain with OHS component. In order to do this you should do the following: a. Run Fusion Middleware Configuration Wizard (ORACLE_HOME/oracle_common/common/bin/config.sh); b. On the step 1 select Update an existing domain option and point your Fusion Middleware Home Path; c. On the step 2 check Oracle HTTP Server, Oracle Enterprise Manager Plugin for WEBTIER templates; d. Go through other steps without any changes and finish configuration process. 4. Start Admin Server and all managed servers related to your cluster 5. Log in to Enterprise Manager FMW Control using http://<hostname>:<port>/em URL 6. Now we will create OHS instance within our Weblogic Domain Infrastructure. Navigate to Weblogic Domain -> Administration -> Create/Delete OHS menu item; 7. Enter to edit mode, clicking Changes -> Lock&Edit menu item; 8. Create new OHS instance clicking Create button; 9. Define Instance Name (e.g. DevOSH) and Machine parameters; 10. Now we need to define listen port. By default OHS will use 7777 port number for income HTTP requests. We could change it to any free port number we would like to use. In order to do it, right click on our created OHS instance (left hand panel) and navigate to Administration -> Port Configuration; 11. Click on record with port number 7777 and then click Edit button; 12. Change port number value (in our case this will be 8080) and then click OK button; 13. Now we need to edit mod_wl_ohs configuration in order to enable OHS to act as proxy for WebLogic Server Instances/Cluster; 14. In order to do it right click on our created OHS instance (left panel) and navigate to Administration -> mod_wl_ohs Configuration; a. In Weblogic Cluster you should enter cluster address (define <host:port> for all managed servers which participated in cluster), e.g: 192.168.56.2:7004,192.168.56.2:7005 b. Define Weblogic Port parameter at which the Oracle WebLogic Server host is listening for connection requests from the module (or from other servers); c. Check Dynamic Server List option. This will dynamically update cluster list for every request; d. In the Location table define list of endpoint locations which you would like to process. In order to do this click Add Row button and define Location, Weblogic Cluster, Path Trim and Path Prefix parameters (if required); e. Click Apply button in order to save changes. 15. Activate changes clicking Changes ? Activate Changes menu item; 16. Finally we will start configured OHS instance. Right click on OHS instance tree item under Web Tier folder, select Control -> Start Up menu item; 17. Ensure that OHS instance up and running and then test your environment. Run deployed application to your Weblogic Cluster accessing via OHS web proxy; Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Read the article

Answers to Your Common Oracle Database Lifecycle Management Questions

- by Scott McNeil

We recently ran a live webcast on Strategies for Managing Oracle Database's Lifecycle. There were tons of questions from our audience that we simply could not get to during the hour long presentation. Below are some of those questions along with their answers. Enjoy! Question: In the webcast the presenter talked about “gold” configuration standards, for those who want to use this technique, could you recommend a best practice to consider or follow? How do I get started? Answer:Gold configuration standardization is a quick and easy way to improve availability through consistency. Start by choosing a reference database and saving the configuration to the Oracle Enterprise Manager repository using the Save Configuration feature. Next create a comparison template using the Oracle provided template as a starting point and modify the ignored properties to eliminate expected differences in your environment. Finally create a comparison specification using the comparison template you created plus your saved gold configuration and schedule it to run on a regular basis. Don’t forget to fill in the email addresses of those you want to notify upon drift detection. Watch the database configuration management demo to learn more. Question: Can Oracle Lifecycle Management Pack for Database help with patching an Oracle Real Application Cluster (RAC) environment? Answer: Yes, Oracle Enterprise Manager supports both parallel and rolling patch application of Oracle Real Application Clusters. The use of rolling patching is recommended as there is no downtime involved. For more details watch this demo. Question: What are some of the things administrators can do to control configuration drift? Why is it important? Answer:Configuration drift is one of the main causes of instability and downtime of applications. Oracle Enterprise Manager makes it easy to manage and control drift using scheduled configuration comparisons combined with comparison templates. Question: Does Oracle Enterprise Manager 12c Release 2 offer an incremental update feature for "gold" images? For instance, if the source binary has a higher PSU level, what is the best approach to update the existing "gold" image in the software library? Do you have to create a new image or can you just update the original one? Answer:Provisioning Profiles (Gold images) can contain the installation files and database configuration templates. Although it is possible to make some changes to the profile after creation (mainly to configuration), it is normally recommended to simply create a new profile after applying a patch to your reference database. Question: The webcast talked about enforcing in-house standards, does Oracle Enterprise Manager 12c offer verification of your databases and systems to those standards? For example, the initial "gold" image has been massively deployed over time, and there may be some changes to it. How can you do regular checks from Enterprise Manager to ensure the in-house standards are being enforced? Answer:There are really two methods to validate conformity to standards. The first method is to use gold standards which you compare other databases to report unwanted differences. This method uses a new comparison template technology which allows users to ignore known differences (i.e. SID, Start time, etc) which results in a report only showing important or non-conformant differences. This method is quick to setup and configure and recommended for those who want to get started validating compliance quickly. The second method leverages the new compliance framework which allows the creation of specific and robust validations. These compliance rules are grouped into standards which can be assigned to databases quickly and easily. Compliance rules allow for targeted and more sophisticated validation beyond the basic equals operation available in the comparison method. The compliance framework can be used to implement just about any internal or industry standard. The compliance results will track current and historic compliance scores at the overall and individual database targets. When the issue is resolved, the score is automatically affected. Compliance framework is the recommended long term solution for validating compliance using Oracle Enterprise Manager 12c. Check out this demo on database compliance to learn more. Question: If you are using the integration between Oracle Enterprise Manager and My Oracle Support in an "offline" mode, how do you know if you have the latest My Oracle Support metadata? Answer:In Oracle Enterprise Manager 12c Release 2, you now only need to download one zip file containing all of the metadata xmls files. There is no indication that the metadata has changed but you could run a checksum on the file and compare it to the previously downloaded version to see if it has changed. Question: What happens if a patch fails while administrators are applying it to a database or system? Answer:A large portion of Oracle Enterprise Manager's patch automation is the pre-requisite checks that happen to ensure the highest level of confidence the patch will successfully apply. It is recommended you test the patch in a non-production environment and save the patch plan as a template once successful so you can create new plans using the saved template. If you are using the recommended ‘out of place’ patching methodology, there is no urgency because the database is still running as the cloned Oracle home is being patched. Users can address the issue and restart the patch procedure at the point it left off. If you are using 'in place' method, you can address the issue and continue where the procedure left off. Question: Can Oracle Enterprise Manager 12c R2 compare configurations between more than one target at the same time? Answer:Oracle Enterprise Manager 12c can compare any number of target configurations at one time. This is the basis of many important use cases including Configuration Drift Management. These comparisons can also be scheduled on a regular basis and emails notification sent should any differences appear. To learn more about configuration search and compare watch this demo. Question: How is data comparison done since changes are taking place in a live production system? Answer:There are many things to keep in mind when using the data comparison feature (as part of the Change Management ability to compare table data). It was primarily intended to be used for maintaining consistency of important but relatively static data. For example, application seed data and application setup configuration. This data does not change often but is critical when testing an application to ensure results are consistent with production. It is not recommended to use data comparison on highly dynamic data like transactional tables or very large tables. Question: Which versions of Oracle Database can be monitored through Oracle Enterprise Manager 12c? Answer:Oracle Database versions: 9.2.0.8, 10.1.0.5, 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.1, 11.2.0.2, 11.2.0.3. Watch the On-Demand Webcast Stay Connected: Twitter | Facebook | YouTube | Linkedin | NewsletterDownload the Oracle Enterprise Manager Cloud Control12c Mobile app

Search Results

Search found 60153 results on 2407 pages for 'base system device'.

Page 1626/2407 | < Previous Page | 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 | Next Page >

- by RoyOsherove

- by Mark Virtue

- by raghu.yadav

- by James Michael Hare

- by Jan Tielens

- by Bertrand Le Roy

- by trond-arne.undheim

- by HarveyP

- by mbcrump

- by Matthew Guay

- by pinaldave

- by Dejan Sarka

- by Brian T. Jackett

- by user12620111

- by costlow

- by tonyrogerson

- by costlow

- by Liu Maclean(???)

- by Nick Rosencrantz

- by Wirde

- by Emin Askerov

- by Scott McNeil

< Previous Page | 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 | Next Page >