Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 164/791 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Motherboard or Processor Problem

    - by bradlis7
    My computer is broken, but I'm having trouble narrowing down the issue. I replaced the power supply, because I assumed that was the issue, but it has the same problem. The issue started with my computer starting the fans and running, but it didn't get to the BIOS screen for about 10 seconds. Now it refuses to do anything when the power button is pressed, except when I turn off the machine and take the processor out for 10-20 seconds, then put it back in, I came hit the power button immediately, and the fans start for 1/2 second, and quit. Does this sound like a is a processor or motherboard issue? I removed all components, so I know that the issue is with one of these two things.

    Read the article

  • Proper approach to debug PC startup problems (POST)

    - by saurabhj
    My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

    Read the article

  • Can software operation damage an SD card?

    - by Borek
    My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

    Read the article

  • Why does a hard disk suddenly look to Windows as if it "needs to be formatted"?

    - by pufferfish
    This is more of a theory question, but what are the reason(s) for a disk to suddenly cause Windows to start saying it "needs to be formatted"? It happens to an IDE disk that I have in a cheap external enclosure, and I can usually get most of the data back by using software like recuva. It's now happened to an internal disk I have. I'm not looking for software to fix this (although links would be appreciated), but rather a low-level explanation as to what gets corrupted on the disk.

    Read the article

  • A Versatile Physical Server

    - by Paul
    How does one judge potential memory and processor needs for linux web servers? Specifically, given: A Debian or Ubuntu OS Running a web server (apache2), and A database (MySQL), and A DNS server (bind), and Being used by up to 100 concurrent users, at some points each downloading high-resolution (0.5 to 1 MB) images via a web app. How much should one budget in terms of RAM, type of processor(s), and number of cores? Thanks!

    Read the article

  • Which type of motherboard i should buy and why?

    - by metal gear solid
    If budged is not a problem. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor? Is the size of motherboard and number of Slots only difference between all form factors? Is there any differences among form factors, related to performance of motherboard? Is bigger in Size (ATX) motherboard always better? Is it so smaller in Size motherboard will consume less power? What are pros and cons of each Form factor? What there are so many Form factor were created?

    Read the article

  • Computer powering off after 10 mins or so

    - by Jack
    I have no OS installed, and I am trying to use a linux boot disc. However it is not a linux problem....if I just leave the computer on at the no operating system found message, it still turns off. I thought maybe it was overheating, but I am 90% sure that is not the problem. What else could cause this?

    Read the article

  • SQL Server: Network pauses after installing cheap SATA card: Is there a solution?

    - by samsmith
    At the risk of being assigned to the "bad DBA" club... I did something desperate, and may have to undo it. Problem: After installing a low cost eSATA board, my SQL Server is intermittently unresponsive (seemingly when there is a lot of IO to the eSATA drive). Questions: 1) Is there a solution to the intermittent unresponsiveness that allows me to keep the eSATA in place? 2) Whether or not (1==true): What is a decent, low cost way to add 1-3 TB storage to SQL for non-critical SQL DBs? Detail: Our SAN is full, and expanding it is costly and will take a month. I have a pressing need to add 1-3 TB for some development DBs (e.g. not mission critical; data loss is OK). As a bandaid, I threw a $20 eSATA PCI board in the Dell 1950 server, and attached an external 2TB eSATA drive. This seemed to work fine, but I notice that our production SQL DBs, and even remote desktop, now experience network "pauses" that they never did before (with both SQL client apps and remote desktop throwing "networking problem" errors). This SQL Server has lots of memory, and runs an instance of SQL 2005 (where all line of business apps reside) and an instance SQL 2008 (for development db's). SQL Server RAM has been appropriately configured, and this setup has run great for years. The server is: Dell 1950 Win2003 x64 14GB RAM PERC controller, 2 mirrored hd's internal Dell SAN over gbit ethernet, dual homed 2 PCIx slots (1 used by NIC for SAN, 1 now in use for eSATA board) Thank you for suggestions!

    Read the article

  • How to get audio driver for compaq c700 ?

    - by Leena
    Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

    Read the article

  • Using a degrading corrupted hard disk with a brand new one. Is this ok?

    - by EApubs
    My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

    Read the article

  • Unreliable resume from suspend?

    - by dsimcha
    My desktop PC (home-built) resumes from suspend somewhat unreliably. I'd say that it resumes successfully about 85-90% of the time and hangs with a blank screen 5-10% of the time. As far as I can tell, the success or failure of the resume is completely random. I doubt it's a software problem because I triple boot Windows 7, Windows XP and Ubuntu and it's similar under all 3 operating systems. If it matters, my system is overclocked, though other than the resume-from-suspend issue, it's definitely rock stable. What are some of the obvious suspects that would cause random, sporadic failures to resume from suspend?

    Read the article

  • Are there any issues with using an ATI 5870 on an nVidia motherboard?

    - by Liam
    I have an Alienware machine, so I'm not entirely sure on the make of motherboard, however, I do know it's got nforce on it and allows me to use nVidia cards in SLI. My 8800GTX has recently died and I'm looking to buy a replacement - I'm considering the ATI 5870, but what I want to know is, if I choose this card, does it mean I will need to change motherboard just to change graphics card vendor or does it not matter?

    Read the article

  • Data loss by randomly unplugging the computer during runtime

    - by Kan
    I'm from Austria and we and the Germans have some sort of bad science-show which runs every day. What I call it would rougly translate to "half-knowledge" if you want so. By the way: It is called "Galileo". So they thought they'd make a computer myth busters video right now, and I couldn't believe what I saw and heard... The strangest thing to me was that they asked: "Does unplugging the computer damage your data?" Then they started up some machine with Vista on it, started copying some files and randomly unplugged the PC cable, the whole thing around 50 times. After their computer continued to start up normally, they just said "nothing can happen, your data or computer can't be damaged". They of course excluded unsaved data in running programs like text editors from this. I asked myself: What the hell are their "computer experts" saying? You can't tell by unplugging the cable 50 times if that can damage your computer. Can unplugging the cable during runtime cause data loss (as said by the moderator of the show)? (I destroyed my windows registry once during a reset)

    Read the article

  • Can a power loss break an hard disk?

    - by dag729
    Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

    Read the article

  • Running computer from separate room

    - by Dan
    I want my computer to be in the basement, but to use it on the first floor. Which cables should I run through the floor? Can some be wireless or other methods? Here are some of the options I've thought of: Basic: Run DVI, usb (mouse), usb (keyboard), and audio cable (4 cables) USB Hub option: Run DVI, and 1 usb, then using a usb hub split it into mouse, keyboard, maybe even audio (2-3 cables) HDMI Option: If I get a new video card and monitor that supports HDMI, would I be able to run both audio and video through it? Would the monitor have to have an audio out? Also there is a lot of extra bandwidth in the HDMI cables, could I send two monitors on 1 cable or would I have to use 2 cables? How about sending mouse/keyboard through the HDMI cable? I see a lot of monitors with USB hubs built in, but I assume I'd still have to wire HDMI + 1 USB cable to use the USB hubs? X Terminal Machine/Thin Client: I don't really know much about this option. Not sure if it would allow me to run graphics acceleration and watch movies, does anyone know more details about what this would allow me to do? Other options: Any other ways to do this? Can any of this be wireless?

    Read the article

  • Why does my HDD produce a high-pitched noise when the CPU is in use?

    - by CyberOptic
    I know this is strange. Some time ago, I bought a new 7200rpm HDD for my desktop system (I'll look for the model later). Every time the CPU is used, a high frequency cheep comes from the HDD. I'm sure it's the HDD because the problem does not occur if the HDD is not attached or is in energy-saving mode (I cross-checked by booting from a live CD). What could be the reason for the cheep sounds? Could it be the power supply?

    Read the article

  • Upgrade or replace?

    - by Felix
    My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

    Read the article

  • Combine Local Disk to another hard drive

    - by admintech
    I have a 150gb local disk on my Windows 7 x64 ultimate computer, i recently bought another 150gb hard drive and wish to merge/combine the 2 together to form 1 300gb hard drive. Is this possible to do without losing all the data on it? And i have thought about SATA but was curious if there was a faster easier option before i go ahead and take my pc apart

    Read the article

  • Microsoft mouse screws up my power settings

    - by Patriot
    Running a new computer with Windows 7 and 64-bit OS. Had a wireless Logitech mouse that worked perfectly with this set up. The mouse was old, and the buttons were sticking and causing double clicks, so I bought a new Microsoft Mobile Wireless 3000 mouse to replace it. The new mouse works perfectly, but now my screen saver is disabled and my computer won't go into sleep mode after 15 minutes as per my power setting. If I hook the Logitech mouse back up, screen saver works fine and computer goes to sleep as it should. Am I missing something, or is Microsoft's mouse just junk. Got no software with the new mouse, so no drivers seem available.

    Read the article

  • Sound doesn't work anymore after replacing RAM

    - by thejh
    Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

    Read the article

  • CPU Cores: The more the better?

    - by T Pops
    I currently have a dual-core processor at work and a quad-core at home. I've noticed both PCs are pretty equal as far as launching applications/surfing the web. The difference I can see is that my dual-core is 2.8GHz and my quad-core is 2.4GHz. Is it better to have a dual-core with a fast clock speed or a quad-core with a mediocre clock speed?

    Read the article

  • Server drives: 2.5" SCSI less reliable than 3.5" ?

    - by Bill
    Just had an HP 2.5" SAS 10k drive fail on a RAID5 array after about 2.5 years. It made me wonder if this was a fluke or an indication that 2.5" drives are less reliable than 3.5" SAS drives. I've had many 3.5" SAS drives running for many years without any issues (knock on wood). I would think that smaller drives would generate less heat and therefore be more reliable, but couldn't find any evidence of this. I realize all drives will eventually fail and that it's a crap shoot with any particular model, but was hoping someone could point out some related studies or comment on the SCSI drive sizes they've found to be most reliable in servers. Thanks.

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >