Search Results

Search found 17667 results on 707 pages for 'vista home premium'.

Page 165/707 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• Invalid Opcode 0000

  - by Mr47

  At random times (usually when watching a movie in XBMC), the computer locks up. I can still sometimes SSH in and get the 'dmesg' output before that locks up too. A hard reboot is usually required to get things going again. I have cut out the date/time/server columns for easier reading, please do ask if these seem relevant omissions... System: Ubuntu 11.04 (2.6.38-8-server) x64 X11 installed with IceWm (and XBMC) Core 2 Duo E8400 @ 3.00GHz 8 GB RAM Asus P5Q premium motherboard Primary harddrive: OCZ Vertex 2 60 GB (SSD) Other harddrives: various 750GB, 1TB, 1.5TB & 2TB (WD & samsung) Any important information I am not supplying is purely a sign of my incompetence in these matters, so please do ask and excuse me for my inabilities... invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map CPU 0 Modules linked in: parport_pc ppdev vesafb snd_hda_codec_analog tuner_simple tuner_types wm8775 tda9887 tda8290 tea5767 tuner cx25840 ir_lirc_codec lirc_dev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ir_sony_decoder snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq rc_rc6_mce ivtv ir_jvc_decoder cx2341x i2c_algo_bit v4l2_common mceusb videodev ir_rc6_decoder ir_rc5_decoder snd_timer ir_nec_decoder nvidia(P) btusb bluetooth rc_core v4l2_compat_ioctl32 tveeprom snd_seq_device pata_marvell psmouse shpchp serio_raw snd asus_atk0110 soundcore snd_page_alloc lp parport firewire_ohci firewire_core crc_itu_t r8169 sky2 ahci libahci Pid: 4597, comm: xbmc.bin Tainted: P 2.6.38-8-server #42-Ubuntu System manufacturer P5Q Premium/P5Q Premium RIP: 0010:[<ffffffff8119bc4a>] [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP: 0018:ffff88021f5a59d8 EFLAGS: 00210246 RAX: 0000000000000020 RBX: ffff88021f5a5ac8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000015e36fe0 RDI: 0000000000000000 RBP: ffff88021f5a5a98 R08: ffff88021f5a5ac8 R09: ffff88021f5a5b38 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 000000000000b148 R14: 0000000000000001 R15: ffff8802067034b8 FS: 00007f3f34eb1700(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb8d515000 CR3: 000000021d744000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process xbmc.bin (pid: 4597, threadinfo ffff88021f5a4000, task ffff88021f63db80) Stack: ffff88021f5a5a28 ffffffff8116019d ffff88021f5a5b40 0000002000000003 ffff88021f5a5b38 ffff880206703370 ffffea0006d800f8 0000000000000000 ffffea0006d800f8 0000000c811270b5 ffff88021f5a5a68 ffffffff8110bdba Call Trace: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff81149475>] ? alloc_pages_current+0xa5/0x110 [<ffffffff8120157d>] ext4_readpages+0x1d/0x20 [<ffffffff81116a9b>] __do_page_cache_readahead+0x14b/0x220 [<ffffffff81116ed1>] ra_submit+0x21/0x30 [<ffffffff81116ff5>] ondemand_readahead+0x115/0x230 [<ffffffff811171a0>] page_cache_async_readahead+0x90/0xc0 [<ffffffff8110b184>] ? file_read_actor+0xd4/0x170 [<ffffffff812de72e>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff8110c521>] do_generic_file_read.clone.23+0x271/0x450 [<ffffffff8110d1ba>] generic_file_aio_read+0x1ca/0x240 [<ffffffff8100a82e>] ? __switch_to+0x20e/0x2f0 [<ffffffff81164c82>] do_sync_read+0xd2/0x110 [<ffffffff8108b61c>] ? hrtimer_try_to_cancel+0x4c/0xe0 [<ffffffff81279083>] ? security_file_permission+0x93/0xb0 [<ffffffff81164fa1>] ? rw_verify_area+0x61/0xf0 [<ffffffff81165463>] vfs_read+0xc3/0x180 [<ffffffff81165571>] sys_read+0x51/0x90 [<ffffffff8100bfc2>] system_call_fastpath+0x16/0x1b Code: ff ff 48 c7 85 78 ff ff ff 00 00 00 00 49 d3 ee b9 0c 00 00 00 2b 4d 8c 48 8b b2 c8 00 00 00 ba 01 00 00 00 41 0f af c6 49 d3 e5 <0f> 36 4d 8c 4c 01 e8 d3 e2 4c 8d 44 16 ff 48 8b 53 20 49 d3 f8 RIP [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP <ffff88021f5a59d8> ---[ end trace ac6cd2f4692205a3 ]--- Please note that the error is ALWAYS occuring at do_mpage_readpage+0x9a/0x510 with the same numbers after it. I've tried to come up with the possible meaning of these, but couldn't get any further. I've also noticed that the top block from the call trace is always the following with the exact same numbers: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 Could this indicate a hard drive issue, a RAM issue or something else entirely?

  Read the article

• Windows file locks allowing multiple users to write to open file over network

  - by JPbuntu

  I have 6 windows computers (xp,vista,7) that need to access a samba share (Ubuntu 12.04). I am trying to make it so only one client can open a file at a given time. I thought this was pretty standard behavior of file locks, but I can't get it to work. The way it is right now a file can be open by two users, and changed and saved by either one of them. The last file saved overwrites what ever changes the other user made. At first I thought this was a Samba configuration problem, but I get this behavior even between two windows machines. So far I have only tested: Windows Xp Windows Vista Windows XP Samba << Windows Vista and both give the same behavior. When I tested the Samba configuration, I had set strict locking = yes and get errors logged like this: close_remove_share_mode: Could not get share mode lock for file _prod/part_number_list_COPY.xlsx Eventually all of the files are going to be moved onto the Samba share, so that is the configuration I am most concerned about fixing. Any ideas? Thanks in advance. EDIT: I tested an excel file again, and it is now working properly in both above mentioned cases, I am also no longer getting the above mentioned error. I don't know what happened, perhaps a restart fixed it? (also works with strict locking = no) Although I still need to find a solution for the CAD/CAM files we use, the software is Vector and it does not seem to be using file locks. Is there any software that I can use to manage these files, so two people can't open/edit them at a time? Maybe a windows application that forces file locks? Or a dirt simple version control system? (the only ones I have seen at are too complicated for our needs).

  Read the article

• Windows 7 Media Center PC not displaying MKV files properly

  - by David

  Does anyone know why Windows Media Center wouldn't correctly display a 16x9 video? I just upgraded my home-built HTPC from Vista Ultimate (hey, it was a giveaway) to Windows 7 Ultimate - clean install. After that, I installed the Divx7 beta (to get .MKV support) and AC3filter (so I could HEAR the MKV files). Previously, under Vista Ultimate (32 bit), I had Arcsoft's Total Theater Pro for playing Blu-Rays and MKV decoding under Media Center. Now when I play a 720p 16x9 MKV file, I get some 'letterboxing' - like it's halfway between 4x3 and 16x9 - with the aspect ration looking alightly squished as a result. Here's the wierd part. If I use the Media Center connection software in my XBox 360 - it plays perfectly, filling the 16x9 screen edge-to-edge, just like Vista's WMC software USED to. Of course, beats the network up because the XBox goes to the HTPC, the HTPC goes to my WHS machine to fetch the data, it comes back to the HTPC, gets transcoded and streamed back to the Xbox. I'm running the latest drivers for an NVidia card (as fetched by Windows 7). I have no idea WHY this is because if I play "ordinary" (i.s. SD) Divx files that are 16x9, they play just fine, scaled right up to my screen's edges. It puzzles me as to why the same machine that properly converts the bits for the Xbox can't display/scale them properly for the attached display. Mind you, Windows Media Player exhibits the same symptoms. Ideas?

  Read the article

• Formatted C: from Windows 7 setup, now it won't even install

  - by ocurro

  Help, I'm so confused. I did more or less what's been described here: I formatted Vista and installed Windows 7 over it. Problem is that I'm now unable to boot (...) [1] I'm installing Seven on top of Vista on ACER AS1410 Notebook When it comes to the part where I choose where to install, I pick the partition labeled C: but instead of keeping windows.old files (what would I want them for?) I choose to go and carelessly format the partition (my bad). It shows me this error: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information Now the only option is "Load Driver". i have tried installing every single one from ACER website, none of them are useful. I even flashed orig. BIOS. I've tried going back and choose "Repair" like in the picture:[2] but I only get an error: "Failed to save startup options" I think this is weird, what else can I do? [1] superuser.com/questions/117076/formatting-of-an-xp-vista-dual-boot-machine-now-unable-to-boot-up-xp [2] www.howtogeek.com/wp-content/uploads/2007/08/image51.png

  Read the article

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• VNC from Windows to OS X Lion: App stuck in fullscreen mode

  - by Jonny

  I'm connecting to a remote Mac through a Windows. ahh it gets more complicated than that. I'm sitting by my iMac. I use Virtual Box in it to launch Windows 7. In it I have a VPN connection to a remote Windows network, which allows me to use Remote Desktop to one of the Windows (Vista!) boxes over there. From that Vista box I VNC into a Mac OS X Lion. (Don't ask me why, but that Mac doesn't have a public ip which prevents me from accessing it in the first place.) So: OSXLion - (virtual)Windows7 - Windows Vista - OSX Lion That last Mac was recently upgraded from Snow Leopard. Now with Lion, sometimes apps run in fullscreen. Somehow I can't get out of that fullscreen. Normally you'd move the mouse pointer to the top of screen and a menu list bar drops down allowing you to reach the fullscreen button top right. Now, in my current setup that menu list bar never drops down on the remote Mac at the end of the line. Any ideas?

  Read the article

• CD/DVD Drive not detecting locally burned CD/DVDs, but works fine with Genuine discs.

  - by Rahul

  I'm using Dell Inspiron 1420 - 32 Bit - Windows Vista, since 2.5 years. I'm facing a strange problem with my CD/DVD-drive. I cannot run/play a CD/DVD which I get burned from my friends. But when I insert Genuine CD, I'm able to play/run it. And when I try to install my Vista package which I got with my notebook, the CD/DVD gets loaded. If I insert a CD/DVD which I get from my friend, CD doesn't get loaded and the system gets hanged. But all these CDs/DVDs work on other systems. I've tested it on many of my friends PCs. So, now I'm able to run only genuine CDs & a few genuine DVDs. My Experience/Experiments: I tried to install Windows Vista using Genuine DVD - It worked I tried to install Ubuntu which I got from shipped from Canonical Ltd. - It worked I tried to install OpenSUSE .iso file burned to a DVD in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs(Tested in 4 other PCs) Tried to play a DVD containing movies, burned in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs Any help/suggestions would be appreciated. Thanks.

  Read the article

• Windows 7 Sharing issue on RAID 5 Array(s)

  - by K.A.I.N

  Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

  Read the article

• How To Activate Your Free Office 2007 to 2010 Tech Guarantee Upgrade

  - by Matthew Guay

  Have you purchased Office 2007 since March 5th, 2010?  If so, here’s how you can activate and download your free upgrade to Office 2010! Microsoft Office 2010 has just been released, and today you can purchase upgrades from most retail stores or directly from Microsoft via download.  But if you’ve purchased a new copy of Office 2007 or a new computer that came with Office 2007 since March 5th, 2010, then you’re entitled to an absolutely free upgrade to Office 2010.  You’ll need enter information about your Office 2007 and then download the upgrade, so we’ll step you through the process. Getting Started First, if you’ve recently purchased Office 2007 but haven’t installed it, you’ll need to go ahead and install it before you can get your free Office 2010 upgrade.  Install it as normal.   Once Office 2007 is installed, run any of the Office programs.  You’ll be prompted to activate Office.  Make sure you’re connected to the internet, and then click Next to activate. Get your Free Upgrade to Office 2010 Now you’re ready to download your upgrade to Office 2010.  Head to the Office Tech Guarantee site (link below), and click Upgrade now. You’ll need to enter some information about your Office 2007.  Check that you purchased your copy of Office 2007 after March 5th, select your computer manufacturer, and check that you agree to the terms. Now you’re going to need the Product ID number from Office 2007.  To find this, open Word or any other Office 2007 application.  Click the Office Orb, and select Options on the bottom. Select the Resources button on the left, and then click About. Near the bottom of this dialog, you’ll see your Product ID.  This should be a number like: 12345-123-1234567-12345   Go back to the Office Tech Guarantee signup page in your browser, and enter this Product ID.  Select the language of your edition of Office 2007, enter the verification code, and then click Submit. It may take a few moments to validate your Product ID. When it is finished, you’ll be taken to an order page that shows the edition of Office 2010 you’re eligible to receive.  The upgrade download is free, but if you’d like to purchase a backup DVD of Office 2010, you can add it to your order for $13.99.  Otherwise, simply click Continue to accept. Do note that the edition of Office 2010 you receive may be different that the edition of Office 2007 you purchased, as the number of editions has been streamlined in the Office 2010 release.  Here’s a chart you can check to see what edition you’ll receive.  Note that you’ll still be allowed to install Office on the same number of computers; for example, Office 2007 Home and Student allows you to install it on up to 3 computers in the same house, and your Office 2010 upgrade will allow the same. Office 2007 Edition Office 2010 Upgrade You’ll Receive Office 2007 Home and Student Office Home and Student 2010 Office Basic 2007Office Standard 2007 Office Home and Business 2010 Office Small Business 2007Office Professional 2007Office Ultimate 2007 Office Professional 2010 Office Professional 2007 AcademicOffice Ultimate 2007 Academic Office Professional Academic 2010 Sign in with your Windows Live ID, or create a new one if you don’t already have one. Enter your name, select your country, and click Create My Account.  Note that Office will send Office 2010 tips to your email address; if you don’t wish to receive them, you can unsubscribe from the emails later.   Finally, you’re ready to download Office 2010!  Click the Download Now link to start downloading Office 2010.  Your Product Key will appear directly above the Download link, so you can copy it and then paste it in the installer when your download is finished.  You will additionally receive an email with the download links and product key, so if your download fails you can always restart it from that link. If your edition of Office 2007 included the Office Business Contact Manager, you will be able to download it from the second Download link.  And, of course, even if you didn’t order a backup DVD, you can always burn the installers to a DVD for a backup.   Install Office 2010 Once you’re finished downloading Office 2010, run the installer to get it installed on your computer.  Enter your Product Key from the Tech Guarantee website as above, and click Continue. Accept the license agreement, and then click Upgrade to upgrade to the latest version of Office.   The installer will remove all of your Office 2007 applications, and then install their 2010 counterparts.  If you wish to keep some of your Office 2007 applications instead, click Customize and then select to either keep all previous versions or simply keep specific applications. By default, Office 2010 will try to activate online automatically.  If it doesn’t activate during the install, you’ll need to activate it when you first run any of the Office 2010 apps.   Conclusion The Tech Guarantee makes it easy to get the latest version of Office if you recently purchased Office 2007.  The Tech Guarantee program is open through the end of September, so make sure to grab your upgrade during this time.  Actually, if you find a great deal on Office 2007 from a major retailer between now and then, you could also take advantage of this program to get Office 2010 cheaper. And if you need help getting started with Office 2010, check out our articles that can help you get situated in your new version of Office! Link Activate and Download Your free Office 2010 Tech Guarantee Upgrade Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideCenter Pictures and Other Objects in Office 2007 & 2010Change the Default Color Scheme in Office 2010Show Two Time Zones in Your Outlook 2007 Calendar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide

  Read the article

• phablet-flash aborting while installing Ubuntu Touch on Nexus 4

  - by Till B

  I have a Nexus 4 with Android 4.3 installed and I want to flash it to Ubuntu Touch. My system is Ubuntu 12.04, running inside a virtual machine on Mac OS 10.5.8. To use the VM, I opened an NAT bridge and forwarded port 5037 for adb, I can see the Nexus with adb and e.g. use the adb shell into it. USB ports are also forwarded to the VM. I follow these instructions to the letter. My bootloader is unlocked, just as it was described in the instructions. Now I encounter different issues, when executing sudo phablet-flash ubuntu-system --no-backup. On the first run, it got stuck in this state: INFO:phablet-flash:Decompressing partitions/recovery.img from /home/till/Downloads/phablet-flash/imageupdates/pool/device-5ba3031cb0d6fc624848266edba781e3e821b6e1e8dd21105725f0ab26077d0a.tar.xz INFO:phablet-flash:Restarting device... wait INFO:phablet-flash:Restarting device... wait complete INFO:phablet-flash:Booting /tmp/tmpMSN8bm/partitions/recovery.img < waiting for device > downloading 'boot.img'... OKAY [ 1.772s] booting... OKAY [ 0.005s] finished. total time: 1.779s INFO:phablet-flash:Waiting for recovery image to boot The following happened: around the line "INFO:phablet-flash: Restarting...", it rebooted into the bootloader. The bootloader shows only for two seconds, then the screen goes off and the phone stays off. But I do notice, that the screen is not off - it is just black, but the background light is on. If I wait long enough, phablet-flash aborts with ERROR:phablet-flash:Wait for recovery expired On the second try, I wanted to manually start the bootloader and choose "Recovery mode". Pressing "volume down+power" at first did nothing. Releasing the buttons and then pressing them again brought me into the bootloder. After choosing "Recovery mode", phablet-flash continued and after a while aborted with the following output: INFO:phablet-flash:Wait for recovery image to boot complete INFO:phablet-flash:Clearing /data and /cache INFO:phablet-flash:Pushing /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz to /cache/recovery/ failed to copy '/home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz' to '/cache/recovery/': Permission denied ERROR:phablet-flash:Command 'adb push /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz /cache/recovery/' returned non-zero exit status 1 Removing directory /tmp/tmpDnbz6N Removing directory /tmp/tmpth4L6w What can I do to properly flash my phone with Ubuntu Touch? I noticed that adb does not show the phone in recovery mode: Typing adb devices, when the Nexus 4 is in recovery mode, shows the serial number and the state device, where it should show recovery. Should the phone be rooted? This is not mentioned in the instructions.

  Read the article

• Find More Streaming TV Online with Clicker.tv

  - by DigitalGeekery

  Looking for a way to access more of your favorite TV Shows and other online entertainment? Today we’ll take a look at Clicker.tv which offers an awesome way to find tons of TV programs and movies. Clicker.tv Clicker.tv is an HTML5 web application that indexes both free and premium content from sources like Hulu, Netflix, Amazon, iTunes, and more. Some movies or episodes, such as those from Netflix and Amazon.com’s Video on Demand, will require viewers to have a membership, or pay a fee to access content. There is also a Clicker.tv app for Boxee.   Navigation Navigating in Clicker.tv is rather easy with your keyboard. Directional Keys: navigate up, down, left, and right. Enter: make a selection Backspace: return to previous screen Escape: return to the Clicker.tv home screen. Note: You can also navigate through Clicker.tv with your PC remote. Recommended Browsers Firefox 3.6 + Safari 4.0 + Internet Explorer 8 + Google Chrome Note: You’ll need the latest version of Flash installed to play the majority of content. Earlier versions of the above browsers may work, but for full keyboard functionality, stick with the recommendations. Using Clicker.tv The first time you go to Clicker.tv, (link below) you’ll be met with a welcome screen and some helpful hints. Click Enter when finished.   The Home screen feature Headliners, Trending Shows, and Trending Episodes. You can scroll through the different options and category links along the left side.   The Search link pulls up an onscreen keyboard so you can enter search terms with a remote as well as a keyboard. Type in your search terms and matching items are displayed on the screen.   You can also browse by a wide variety of categories. Select TV to browse only available TV programs. Or, browse only Movies in the movie category. There are also links for Web content and Music.   Creating an Account You can access all Clicker.tv content without an account, but a Clicker account allows users to create playlists and subscribe to shows and have them automatically added to their playlist. You’ll need to go to Clicker.com and create an account. You’ll find the link at the upper right of the page. Enter a username, password and email address. There also an option to link with Facebook, or you can simply Skip this step.   Go to Clicker.tv and sign in. You can manually type in your credentials or use the onscreen keyboard with your remote.   Settings If you’d prefer not to display content from premium sites or Netflix, you can remove them through the Settings. Toggle Amazon, iTunes and Netflix on or off.   Watching Episodes To watch an episode, select the image to begin playing from the default source, or select one of the other options. You can see in the example below that you can choose to watch the episode from Fox, Hulu, or Amazon Video on Demand.   Your episode will then launch and begin playing from your chosen source. If you choose a premium content source such as iTunes or Amazon’s VOD, you’ll be taken to the Amazon’s website or iTunes and prompted to purchase the content.   Playlists Once you’ve created an account and signed in, you can begin adding Shows to your playlist. Choose a series and select Add to Playlist.   You’ll see in the example below that Family Guy has been Added and the number 142 is shown next to the playlist icon to indicate that 142 episodes has been added to your playlist. Underneath the listings for each episode in your playlist you can mark as Watched, or Remove individual episodes.   You can also view the playlist or make any changes from the Clicker.com website. Click on “Playlist” on the top right of the Clicker.com site to access your playlists. You can select individual episodes from your playlists, remove them, or mark them as watched or unwatched. Clicker.TV and Boxee Boxee offers a Clicker.TV app that features a limited amount of the Clicker.TV content. You’ll find Clicker.TV located in the Boxee Apps Library. Select the Clicker App and then choose Start. From the Clicker App interface you can search or browse for available content. Select an episode you’d like to view… Then select play in the pop up window. You can also add it to your Boxee queue, share it, or add a shortcut, just as you can from other Boxee apps. When you click play your episode will launch and begin playing in Boxee. Conclusion Clicker.TV is currently still in Beta and has some limitations. Typical remotes won’t work completely in all external websites. So, you’ll still need a keyboard to be able to perform some operations such as switching to full screen mode. The Boxee app offers a more fully remote friendly environment, but unfortunately lacks a good portion of the Clicker.tv content. As with many content sites, availability of certain programming may be limited by your geographic location. Want to add Clicker.TV functionality to Windows Media Center? You can do so through the Boxee Integration for Windows 7 Media Center plug-in. Clicker.tv Clicker.com Similar Articles Productive Geek Tips Share Digital Media With Other Computers on a Home Network with Windows 7Stream Music and Video Over the Internet with Windows Media Player 12Listen to Online Radio with AntennaEnable Media Streaming in Windows Home Server to Windows Media PlayerNorton Internet Security 2010 [Review] TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

  Read the article

• Unable to set background image using python (2.7.3), bash and gnome3

  - by malon

  #!/usr/bin/env python import os bashCommand = "gsettings set org.gnome.desktop.background picture-uri file:///home/malon/autowallpaperchanger/" + pic_name print bashCommand os.system(bashCommand) Print result: gsettings set org.gnome.desktop.background picture-uri file:///home/malon/autowallpaperchanger/wallpaper-1252048.jpg Copying and pasting the print result into a terminal makes the change successfully, so the command is correct, but os.system isn't processing the request correctly for some reason. In the full script (posted below), I use os.system for a different reason immediately before (wget) and that works fine. Thank you! Full script: http://pastebin.com/R90GTmBZ

  Read the article

• How to compile 'stygmorgan-0.29'?

  - by iwan

  I am trying to compile stygmorgan-0.29.tar.bz2 and got these messages: stygmorganui.cxx:7:28: fatal error: stygmicon128.xpm: No such file or directory compilation terminated. make[2]: *** [stygmorganui.o] Error 1 make[2]: Leaving directory `/home/papa/Downloads/stygmorgan-0.29/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/papa/Downloads/stygmorgan-0.29/src' make: *** [all-recursive] Error 1 papa@papa-G31-M7-TE:~/Downloads/stygmorgan-0.29$

  Read the article

• get the path of moved directory/file (source path and destination path)

  - by Ghanshyam Rathod

  When one directory is moved to other destination path, then i want to log the entry of original source path and entry of the path where it moved. any command is already available ? or any other way of doing this task? Ex: D1 = /home/user/Documents/test D2 = /home/user/Documents/Data/test when i moved D1 directory to the destination path to D2 directory then i want to log, like "test" directory is moved from D1 to D2 path Thanks

  Read the article

• Including Amazon affiliate link to Amazon homepage

  - by zpesk

  I want a link on my Web site that sends the user to the Amazon homepage, but includes my affiliate code so that any subsequent purchases get credited to my account. I have been browsing through the Amazon Associates portal and there only seems to be a way to link to a specific product. I found this link on daringfireball.net: http://www.amazon.com/exec/obidos/redirect?tag=daringfirebal-20&path=subst/home/home.html If I replace his affiliate code (daringfirebal-20) with mine, will this work? is this documented anywhere?

  Read the article

• Unity quick launch icon opens another program icon on program start

  - by Patrick

  I prepared a custom .desktop file for my chromium browser that loads a different user profile. When ever i click the icon now it open the browser, but also uses a new icon on the launcher bar (not locked to the launcher). Is there any way to tell the program to keep connected to the first icon? [Desktop Entry] Type=Application Name=Second Browser Exec=chromium-browser --user-data-dir="/home/patrick/bin/chrome-profiles/second" TryExec=chromium-browser Icon=/home/patrick/.local/share/applications/icons/browser.png MimeType=text/html;

  Read the article

• Installation problem: What does"Add this path and evaluate require" mean?

  - by PENG TENG

  I'm installing a software from github:OPEN-VRP It is said that : ~$ git clone git://github.com/mck-/Open-VRP.git Add this path and evaluate require: (push "/path/to/Open-VRP/" asdf:*central-registry*) (require 'open-vrp) (in-package 'open-vrp) What does "Add this path and evaluate require:" mean? I have followed the instruction and the termianl said peng@peng-ThinkPad-SL410:~/??/VRP$ push "/home/peng/??/VRP/Open-VRP" asdf:*central-registry* push: getaddrinfo(/home/peng/??/VRP/Open-VRP): Name or service not known

  Read the article

• KMenu & shell script

  - by allenskd

  I'm trying to make a very small shell script with a simple command and add it up to the KMenu. Well, thing is that once it launches the shell script, it closes it fast and I want to leave it open because the shell script attempts to create run a web application using a framework. I tried with this first #!/bin/bash play run /home/david/Projects/ZS then I tried with this #!/bin/bash konsole -e play run /home/david/Projects/ZSBlackboard In terminal, it runs perfectly, but in launcher.. not so much Any solution or suggestion is appreciated, thanks

  Read the article

• Help me solve my problem with NPR Media Player

  - by Calcipher

  First of, let me apologize for this getting a bit technical. Several weeks ago, I found that while using NPR's media player (e.g. click on 'Listen to the Show' - this is what I've been using as a test) the stream would suddenly halt after a minute or three. I could not get the stream to restart without reloading the page. Now, I assumed this was an issue with NPR's player and Linux (or just a bug in their stuff in general) so I began to dig, the following is what I have tried to date (please note, the tldr; option is to skip to the latest thing as I think I know what is causing the problem). Note: All testing has been done, for consistency purposes, on a clean install of Chromium with no pluggins running. My machine is Ubuntu 10.10x64. First thing I always try, I disabled all firewall stuff on the system (UFW, default deny all, allow ssh). No change, firewall back up for all additional tests unless otherwise noted. In any case, UFW is stateful, so connections it started on a non-specified on different ports will continue to work. I deleted my ~/.macromeda and ~/.adobe folders, restarted (just to be sure) and tried. Program still froze. I decided the problem might be with my install of flash, so I purged the version I had (and the home folders again). I installed the x64 version of flash from a PPA. This had no effect. I decided that the problem might be with the version of flash, so I purged the x64 version and installed the standard x32 version that comes with Ubuntu. No luck. Back to the x64 version for consistency, I decided to set up a 64-bit mini 'clone' of my system in VirtualBox. I was able to run the media player with no problem. I rsynced (in archive mode) my home directory from my real machine to the virtual machine (with bridged networking, so it was fully visible on the network). I also used a few tricks to install ALL of the same software (and repositories) from the real machine to the virtual machine. I was still able to listen to the player. I decided that the problem was with my install (after all, it had gone through two major version upgrades). As I have /home/ on a separate partition it was easy to reinstall and use the same trick from #6 to have my system up and running again within about an hour. I continue to have issues with the NPR Media Player. By this point the weekend had come. At work, I use a wired connection while at home I use a wireless connection. For some reason I forgot that I was having problems and used the NPR Media Player over the weekend. Low and behold it worked just fine at home on wireless (note: for various reasons, I could not test this on wired at home). Following from #6, I decided that the problem was either something with the network at work or still something with my account. As the latter was easier to test, I created a new account on my system and used that at work. The Media Player worked. At a loss, I decided to watch the traffic with tshark (the text based brother of wireshark) - X's to protect the innocent, I am the XXX.24.200.XXX: sudo tshark -i eth0 -p -t a -R "ip.addr == XXX.24.200.XXX && ip.addr == XXX.166.98.XXX" As you would expect, there were tons and tons of packets, but each and every time the player froze, this is what I got 08:42:20.679200 XXX.166.98.XXX - XXX.24.200.XXX TCP macromedia-fcs 56371 [PSH, ACK] Seq=817686 Ack=6 Win=65535 Len=1448 TSV=495713325 TSER=396467 08:42:20.718602 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396475 TSER=495713325 08:42:21.050183 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713362 TSER=396475 08:42:21.050221 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396508 TSER=495713362 08:42:21.680548 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713425 TSER=396508 08:42:21.680605 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396571 TSER=495713425 08:42:22.910354 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713548 TSER=396571 08:42:22.910400 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396694 TSER=495713548 08:42:25.340458 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713791 TSER=396694 08:42:25.340517 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396937 TSER=495713791 08:42:30.170698 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495714274 TSER=396937 08:42:30.170746 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=397420 TSER=495714274 08:42:39.801738 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495715237 TSER=397420 08:42:39.801784 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=398383 TSER=495715237 08:42:59.032648 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495717160 TSER=398383 08:42:59.032696 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400306 TSER=495717160 08:43:00.267721 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [FIN, ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400430 TSER=495717160 08:43:00.267827 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [RST, ACK] Seq=7 Ack=819134 Win=65535 Len=0 TSV=400430 TSER=495717160 So, as you can see, my machine is sending out a ZeroWindow packet (which I think means some buffer or another filled up) which causes the Media Player to halt (unfortunately, terminally - no controls on it really do anything anymore). Any ideas, at all, what would cause this? Why only on eth0 under my main account?

  Read the article

• How to restore .bashrc

  - by Miranda Webb

  Terminal shows this bash: /home/atlas/.bashrc: line 73: syntax error near unexpected token `[' bash: /home/atlas/.bashrc: line 73: `if [ -x /usr/bin/dircolors ] ; then ' I've tried to fix it using "cp /ect/skel/.bashrc ~/" And I get this "cp: cannot stat `/ect/skel/.bashrc': No such file or directory" I'm unsure of why this is doing this and how to fix it. I had previously been in the bashrc file messing around and apparently I've messed something up. All I want to do is restore the bashrc file to factory settings.

  Read the article

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• openssl/rand.h header file not found

  - by Arun Reddy Kandoor

  I have installed libssl-dev package but that did not install the include files. How do I get the openssl include files? Appreciate your help. Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for node path : ok /usr/bin/node Checking for node prefix : ok /usr Checking for header openssl/rand.h : not found /home/arun/Documents/webserver/node_modules/bcrypt/wscript:30: error: the configuration failed (see '/home/arun/Documents/webserver/node_modules/bcrypt/build/config.log') npm ERR! error installing [email protected] npm ERR! [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! npm ERR! Failed at the [email protected] preinstall script. npm ERR! This is most likely a problem with the bcrypt package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node-waf clean || (exit 0); node-waf configure build npm ERR! You can get their info via: npm ERR! npm owner ls bcrypt npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 3.8.0-32-generic npm ERR! command "node" "/usr/bin/npm" "install" npm ERR! cwd /home/arun/Documents/webserver npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! code ELIFECYCLE npm ERR! message [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! message `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/arun/Documents/webserver/npm-debug.log npm not ok

  Read the article

• A Brother MFC 7840w Printer Is A Good Companion To Any Desktop Computer

  Whether you run a small home based business or the kids just do their homework on it, a home computer needs a good printer attached to it. The Brother MFC 7840W printer not only produces high quality... [Author: Ben Pate - Computers and Internet - March 25, 2010]

  Read the article

• Fix Nautilus URIs in a Python script

  - by Pablo

  I have a very basic Python script I wrote mostly for learning purposes. It opens a terminal in the current folder. However, I can't get it to work in folders with accented characters in the URI (e.g.: /home/pablo/Vídeos or /home/pablo/Área de Trabalho), because it looks like Nautilus URIs are encoded to those %{number} values. Is there a way to convert these URIs to normalized URIs without having to translate every possible accented value by hand? Thanks in advance!

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >