Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 166/314 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• Do most front and rear USB connections deliver the same power and performance?

  - by Bratch

  I was reading this Three Monitors For Every User and there were some comments about rear USB ports being able to deliver more power than front USB ports because they are directly connected to the motherboard and closer to the power supply (by circuit board runs). Even though the front USB ports may have connectors farther from the power supply, and there are cables from the motherboard to the front ports, I think that the difference in power would be negligible (unless the case is over 5 meters long). Anyone know for sure if they are the same or different? Note that I'm not talking about an older case where the front might have been USB 1.1 and the rear USB 2.0. A modern case would have USB 2.0 on all ports. And of course using a powered hub would deliver plenty of power.

  Read the article

• Windows 2003 Server - Can I map a folder to another folder on the same server?

  - by TheCleaner

  Scenario: I have a server that was running low on space. We have an external iscsi SAN that it now has a LUN on and connected to the server as E:\ We are moving the PHOTOS folder from the old location on D:\ to the new E:. That new drive is being shared out as "ARCHIVE". So: \server\shared\photos now becomes \server\archive\photos I can easily place a shortcut in the original location saying "DOUBLE CLICK HERE FOR THE PHOTOS", but it isn't ideal. What I'd like is to be able to have \server\shared\photos simply point to \server\archive\photos. So that if someone wants to map a drive to \server\shared and then browse to the photos folder once in there they will see what is in the \server\archive\photos location. Is that possible? I was thinking about SUBST or DFS, but I don't think either of those will do it.

  Read the article

• What's the simplest way to get .flac music files into iTunes?

  - by Chris Adams

  I'm looking for a simple way to import .flac files into iTunes, so I can play them on my mac, and when I'm out, my iPhone, and I'm willing to be I'm not the first person to want to do this. What are the best tools for doing this? The quality of the music is useful, but truth be told, the speakers I'd play them on are so crappy that a lot of the sound quality in the .flac format would be lost anyway, so I'm not averse to converting to mp3 files. If it helps give any context, I'm using a Macbook with OS 10.5 Leopard, and iTunes 9, connected to a 16gb iPhone with standard apple headphones, which is sometimes plugged into Bose SoundDock for music, and the music files are piano performances. C

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• How to troubleshoot ping request time out [closed]

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• USB forwarding from dom0 to domU

  - by Karolis T.

  What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

  Read the article

• Sonicwall site-to-site can not access remote network

  - by vpnwizard

  I have 2 SonicWall devices (tz100) in 2 different geographical locations. They are connected to each other using site-to-site vpn connection and this works just great. Device A network - 192.168.1.0/24 Device B network - 192.168.2.0/24 When I connect to one device, I can access, from my computer, anything on that specific subnet. However, I am unable to view anything, from my computer, on the other network. Is there a setting somewhere that will forward my requests to the other subnet? Example - I VPN into Device A, but would like to get to a server which is on the Device B network (192.168.2.0/24)

  Read the article

• I'd like to archive files from Ubuntu to Windows between two computers on a shared home network

  - by Wabbitseason

  I have an old laptop running Ubuntu 9.10 which I use as a LAMP environment for web development, and I have a comfortable, powerful desktop computer with Windows 7 installed on it. These two are connected to a home router so both can access the internet. I have been able to set up Samba so I can mount my Apache home directory so it is accessible from Windows and is mapped as a network drive. What I'd like to do is access some Windows folders from Linux so I could automatically create backups (with cron scripts) of my work to physically different locations on the Windows box. Perhaps at a later time I'd set up a local Subversion repository but I'd love to keep backups of that on the Windows drives too. Using Ubuntu's Places/Network menu I can see my desktop but I'm unable to log in to that despite having created the corrent username and password on Windows. All I can get is the following error message: "Unable to mount location. Failed to retrieve share list from server." What could be misconfigurated?

  Read the article

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• Laptop loses signal from WiFi router, but mobile phone holds it fine

  - by Anton

  I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

  Read the article

• ip routing policy in linux

  - by Dragos

  I have a linux system with two network interfaces (eth0 in x.x.x.0 and eth1 in x.x.y.0). Is there any posibility to add some route policy to send all the traffic to network x.x.y.0. I would like even the traffic from eth0 to be send to eth1's network. I cannot delete the direct connected networks from the routing table so all the traffic from x.x.x.0 network is send to eth0. I would like to send all traffic to eth1.

  Read the article

• RDP connections keep dropping

  - by Shaul

  I have an odd problem on my notebook (HP Pavilion dv7). My Internet connection seems OK for the most part. But lately I've been having trouble with Remote Desktop connections. While I can connect to remote computers, the connection is very flaky, and usually drops after a few seconds. Sometimes it'll successfully reconnect automatically, and sometimes not. But even after successful reconnection, it'll just drop again after a few seconds. This appears to be independent of which RDP host I'm connecting to, and which network I'm connected to locally, whether wireless or wired. Other remote control apps like TeamViewer and Ammyy seem to work fine. Any ideas?

  Read the article

• Fortigate VPN Routing issue

  - by user1571299

  I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a VPN ontop of WAN2 with that specific site as it's destination. The default route for my end is WAN1. My problem is I cant figure out how to have both tunnels up at the same time. What's the best practice for achieving this? Thanks

  Read the article

• How do I catalog files on several external hard drives that I want to store off-line? OSX

  - by raudi

  My partner, an artist, has more than 10 external hardisks both USB and firewire and every 2-3 months a new one has to be added (She's working with videos and pictures) currently its 10TB and growing so too much for a affordable NAS. Right now the files are not indexed and I think can not be searched with spotlight because not all drives can be connected at the same time. So if she wants to search for a file, she has to guess which disk/disks (based mostly on the date) and then search several drives. Now I'm looking for a solution to index/catalog the drives, something like GentibusCD Cathy Disclib (all these solutions are unfortunately Windows only) Is there any software for OSX that will catalog all the hard drives, so she can search the catalog, find the files, and get the ID of the disk / disk name that has the content? Preferably something with a GUI so my partner can also use it easily Preferably with Thumbnails for pictures/videos (But even an equivalent to "tree /F /A" would be better than nothing)

  Read the article

• Setting Screen Resolution for Extended Display on Windows 8

  - by ptamzz

  I'm using a Dell Inspiron laptop with Windows 8 Developers Preview. I've connected a second screen (some Dell 22 inch one) and have been using it with 'Extend these displays' options in the Screen Resolution settings. It use to be all fine but yesterday I changed my VGA cable to the 2nd monitor and since then the resolution of the 2nd monitor is not setting properly. Earlier, while auto detecting the monitor, the right resolution use to appear but now, as you can see from the attached image, none of the resolution in the drop down fits with the right proportion. So how do I set the right screen resolution. (I think the right one is 1680 x 1050 which is not there in the list)

  Read the article

• uTorrent error: Access is denied

  - by Ben Franchuk

  When I booted my computer today and opened up uTorrent it went on, as usual, to check the torrents that I had been running before. On one it returned an "Access is denied" error after it had been checked. I have absolutely no idea why this is happening as I was downloading the same torrent just the night before, and additionally because I have other torrents going in the same downloads folder and they do not have any such errors. It may be worth noting that on said defective torrent, there appear to be no seeds and no connected peers (of the 33 available) and three of the trackers appear to be inactive as well (those being Peer Exchange, Local Peer Discovery and DHT). I have rebooted a few times in an attempt to fix this problem, but to no success. I also tried a few times force rechecking / force starting but neither of those worked either. edit I booted today and it was working for whatever reason. thanks for all of the help anyways guys!

  Read the article

• Is mumble safe (privacy wise)?

  - by AnonymousLurker

  When chatting on IRC, it is possible to leak data like OS, CPU type if the IRC client happens to leak it in VERSION string. Anybody doing /CTCP VERSION can see it. Same about timezone (/CTCP TIME). This can be mitigated by turning replies to CTCP queries off. Also, IP address is leaked to others (/whois nickname will show it if it's not cloaked). By analogy, does the mumble client expose such sensitive data to others that are connected to the same server? If it does, what are the ways to mitigate this?

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

  - by Manwe

  Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Windows 7 MCE client server HTPC

  - by Dan Hook

  My HTPC is downstairs connected to my large screen. I would like to use my desktop upstairs to record over the air HDTV and stream it to the HTPC. I have Windows 7 Professional installed on the desktop. I currently have XP on the HTPC, but I'm going to upgrade it to Windows 7. Is there a particular flavor of Win 7 I should use? Is it possible to record on the desktop and use Windows MCE on the HTPC to watch the recorded content? What about live TV? The consensus I've seen is that Windows 7 cannot be configured as a Windows Media Center Extender. Is that the case? If so, what's the cheapest solution for an extender?

  Read the article

• Make the Windows 8 Mail app sync and notify Gmail labels

  - by Matsemann

  My Windows 8 Mail app is connected with Gmail, and is set to sync emails and download emails on arrival. Most of my mail isn't going to the inbox, but is going straight to different labels. Say, all work related mail is going straight to the label Work. The problem is that when I have unread email in Work, the Mail app will not tell me. It will only display a label, Work, I can click on, not Work (1) indicating unread mails. When clicking the label, I will need to wait for some time for it to actually download and sync the mail before anything shows. Even if I tried force syncing just before. So: The Mail app is not syncing my labels, and will not give any visuals that a label contains unread mail. Is there any way to achieve this? Without it, the Mail app is unfortunately pretty useless to me.

  Read the article

• Internet problems

  - by dan

  I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >