Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 163/314 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

  - by Forgiver

  I have an external hard drive that is connected to my computer (Windows 7 Ultimate 64 bit) via a USB port. BitLocker has been activated on the hard drive to protect the data. Yesterday I started downloading a huge data from the internet but now it failed to complete because of CRC error. I tried to repair it with chkdsk f:/r where f is the drive letter of that hard drive. There are many messages reporting "unreadable" as follows: What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

  Read the article

• 3 wire computer fan won't run continuously

  - by Ben

  I had an old computer that didn't work anymore, so I took the CPU fan out to see what I could make with it. The fan is NMB model number BG0903-B044-VTL, like this. It has three wires coming off of it, red, black, and white. I know that the white wire is usually a speed sensor. Does this wire need to be connected to something in order for the fan to run continuously? Right now when I apply power to the red and black wires (from a 9-volt battery) the fan will spin very briefly, and then slow down until it stops. The fan's motor only spins in the instant that the power is turned on, but doesn't continue, even though the power is still applied. How can I get the fan to spin continuously?

  Read the article

• Find computer names on a private network (with nmap?)

  - by paracaudex

  On a LAN, I want to find out the names of all the connected computers using a cross-platform program, preferably nmap. I know I can do nmap -sn xxx.xxx.xxx.xxx/24 (where xxx.xxx.xxx.xxx is a local IP address) to find hosts which are up, but how do I find the computers' hostnames? Do they broadcast this in a way that I can find using nmap? UPDATE: It looks like Angry IP Scanner can do this. How does it do this? Can I replicate it with nmap?

  Read the article

• Attempting to caue packet loss with netem doesn't work - possibly because of NAT (but delay does work)

  - by tomdee

  I have traffic from a WIFI access point routed via an Ubuntu box. I have two network interfaces which are NATed *filter :INPUT ACCEPT [11:690] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [37:6224] -A FORWARD -s 192.168.2.0/24 -i eth1 -o eth0 -m conntrack --ctstate NEW -j ACCEPT -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Mar 15 13:37:21 2012 # Generated by iptables-save v1.4.10 on Thu Mar 15 13:37:21 2012 *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -j MASQUERADE COMMIT If I run a ping app on an Android device connected to the WIFI network I can happily ping google. If I use netem to introduce some delay tc qdisc change dev eth0 root netem delay 100ms I can clearly see pings taking longer. If I use netem to introduce some packet loss tc qdisc change dev ifb0 root netem loss 50% then I see no change. Packet loss does work fine for locally generated traffic, just not for traffic coming in over the network that's being NATed. Any ideas how to sort this out?

  Read the article

• HDMI Sound for HTPC

  - by Brent Arias

  I have the (perhaps) the same problem as stated in this other HDMI sound to HTPC question. I tried the advice of clicking on the speaker in the system tray. I can see the HDMI audio device I want to use. That device claims to be functioning properly. But there is no sound, and it won't let me select it as the active audio device. When I click on the troubleshooter, it says that there are no speakers connected. I would think this is because my computer us unable to pipe sound through the video card (preventing the HDMI from carrying it), except that it truly claims that it has an HDMI sound device that is working correctly. So I'm not sure what is wrong at this point. Thoughts? My system is Windows 7 x64. In case it makes a difference, the video card I'm using is this GeForce GTX 560

  Read the article

• Multiple VLANs on a single subnet

  - by mstaessen

  I would like to establish the setup shown below. The image is taken from (http://gcharriere.com/blog/?p=620) and explains how to set this up on a brocade device. I would like to use an ubuntu server to do the routing. Right now, the switch and the server/router are connected with a trunk and the server uses the vlan package, kernel module and (inner) subnets for routing. I would like that: no IP addresses get lost in the subnetting (outer subnet is /26, inner subnets are /28) I don't want the rigorous subdivision of my outer subnet. I want to assign a VLAN to any IP in the outer subnet. How do I need to configure my interfaces? What is the "ubuntu" translation of "ip follow ve"? Thanks!

  Read the article

• Why is my hosts file not working?

  - by elliot100

  I've been using the hosts file to for local website development, and it's recently stopped working. No entries other than localhost resolve. I've simplified to test, so it now contains only 127.0.0.1 localhost ::1 localhost 127.0.0.1 test.dev localhost responds to ping, test.dev does not. The file is called hosts with no extension It has no trailing spaces It's saved in C:\WINDOWS\System32\drivers\etc which matches the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Oddly, despite UAC being on, I can edit, delete and save the file without admin permissions No proxy is being used, PC is not connected to network for testing Stopping the DNS Client service seemed to resolve the issue for a few minutes, test.dev briefly resolved but doesn't any more. Only firewall is Windows' Machine has been restarted. Is there anything else I should try?

  Read the article

• I get regular power surges and my UPS ticks a lot due to a welding plant. Is this good or bad?

  - by EApubs

  In our home, there is a mechanic who often use a welding plant. When he use it, I think we get a power surge. My UPS ticks madly (not beep, it ticks). Sometimes, I even lose power to the keyboard. When typing, some keys get missing. 1) My question is, is it good for the computer? The UPS claimed to have surge protection. But isn't it working? What should I do to protect my PC? 2) The second question is, I also have a broadband router which is not connected to the UPS. Will it be effected?

  Read the article

• Problem with internet connection

  - by vijay.shad

  Hi all, I am working on windows vista. I have got two internet connections, one is wifi connection with high speed. And other is mobile network connection. There is a very strange problem I am getting. When I connect to wi-fi connection I an not able to serf internet(actually not all the sites). I am able to search on Google but when i click on any link in the search list it does not open. But I am able to serf all the pages in google.com domain and also all the pages in stackoverflow domain. But i am not able to go to page http://repo1.maven.org/maven2 But When I am connected by my mobile network. I am able to serf any site. Can you please tell me what might me the problem with my settings.

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Can i create a virtual machine on my laptop to be used with another monitor?

  - by Ranhiru

  OK, the scenario is like this... I have my laptop... and I have another user without a unit. He has only a keyboard, mouse and a monitor. Is there anyway that I can make him use my computer by creating a virtual environment which he will access, BUT, without interfering with my work. I use my laptop and view my OS from the laptop monitor. I create a virtual environment (some OS probably XP) and run it. The virtual environment is displayed in the connected monitor and the other user uses it using the extra keyboard/mouse and the monitor but without interfering my screen! Is this possible? Stupid? Futuristic? Need more hardware?

  Read the article

• Ubuntu (11.10) fails to connect to wireless network

  - by Tal Galili

  I just installed ubuntu 11.10, and tried to have it connect to the internet. I use a wireless USB stick by edimax (it is called IEEE802.11b/g/n nano USB adapter or also EW-7811Un). My problem is that Ubuntu seems to be able to use the USB to see the networks around me, but when I try to connect to my network - it just keeps trying and failing. I am connected to the internet through a 300M Wireless N Router Model No. TL-WR841N / TL-WR841ND Can you please advise on how this can be resolved? Thanks!

  Read the article

• Windows 2008, 2 NICS, routing problem

  - by Srodriguez

  Dear all, I've some questions regarding basic routing, can't seem to relate to other questions posted in this site. My architecture: Windows 2008 server with 2 nics in the server. NIC1: IP 10.198.6.xxx, submask 255.255.252.0, gateway 10.198.4.xxx NIC2: IP 192.168.168.xxx, submask 255.255.255, no gateway defined both NICS are just connected to two separate switches, with other computers. I want to be able that all the requests that have a destination of 192.168.168.xxx are redirected to the NIC2, all the other to the NIC1. I know it's possible to do it with the route command, but normally we have to specify a gateway? (route ADD 192.168.168.0 MASK 255.255.255.0 ???) How can this be archived? Thanks a lot for your help!

  Read the article

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• Software for capturing still image snapshots from video input

  - by cantabilesoftware

  What software is available that will let me watch video from a USB video capture device at full PAL/NTSC resolution and capture a still image at a button press? More info: I'm using a KaiserBaas USB capture device (http://www.kaiserbaas.com/kaiser-baas-product-page/converters/video-to-dvd-maker), and want to capture screen shots from a PS2 connected to it. I'd like to play the game at the full PS2 resolution and capture certain scenes. The device has a one-touch snapshot button on it, but I can't seem to make it work and there's no mention of it anywhere in the documentation. The device works and the video appears in Power Producer (the included software), but I think it previews it smaller than the full resolution. I could print screen it, but having to crop will be a pain.

  Read the article

• TFTP PUT Failing Across Hosts

  - by Jason

  I have a TFTP server installed on a CentOS host. /etc/xinetd.d/tftp: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /var/lib/tftpboot per_source = 11 cps = 100 2 flags = IPv4 } If I try to PUT a file from a remote host to the host running the TFTP server, I get Transfer Timed Out - however, it does create the file in /var/lib/tftpboot but the file is empty. If I tftp from the tftp server to itself (localhost) and PUT a file, it works fine. I have verified that SELinux is disabled and IPTables are turned off. I can connect from the remote hosts with no issue - just seems to be the PUT I have issue with: [root@SVR01 TEST]# tftp 10.100.2.15 tftp> status Connected to 10.100.2.15. Mode: netascii Verbose: off Tracing: off Literal: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp>

  Read the article

• Is there a way to make scp run faster on a Mac OS X?

  - by paul_sns

  I'm trying to a upload a Flex generated SWF file from my Macbook (running Snow Leopard) using the command scp main.swf server.com:/ I had setup key authentication to prevent typing the user/pass every time. This process normally takes up to two minutes using my connection at home (768kbps down/300+ kbps up). The interesting part is that when I use WinSCP in my Windows XP machine, the process only takes 30 seconds max. Both my MacBook and Windows XP machine use the same internet connection. The MacBook is connected to the router via cable (which should be faster right?) while the Windows XP connects through Wifi. Let me know if you need additional information in order to diagnose the problem. Thanks!

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• How to enable CDR on AsteriskNow 1.5

  - by Michal Niklas

  I have upgraded PBX to Asterisk 1.6.2.7 and now CDR files are not created. It looks that such logging is disabled: Connected to Asterisk 1.6.2.7 currently running on pbx2 (pid = 5824) Verbosity is at least 3 pbx2*CLI> cdr show status pbx2*CLI> Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple Asterisk shows that CDR modules are loaded: pbx2*CLI> module show like cd Module Description Use Count cdr_manager.so Asterisk Manager Interface CDR Backend 0 cdr_csv.so Comma Separated Values CDR Backend 0 app_cdr.so Tell Asterisk to not maintain a CDR for 0 app_forkcdr.so Fork The CDR into 2 separate entities 0 func_cdr.so Call Detail Record (CDR) dialplan functi 0 cdr_custom.so Customizable Comma Separated Values CDR 0 6 modules loaded How to enable creating CDR csv files?

  Read the article

• Is it possible to combine two internet connections to increase performance?

  - by cornjuliox

  I've got a small home network, 3 PCs plus a laptop or two when the relatives come to visit, connected to a single cable internet connection. Now, as soon as everyone starts using the 'net the performance starts to suffer and if the load is heavy enough nobody can get anything done and everyone complains. At one point it was so bad that only one of us could use it at a time. I was researching possible solutions to this problem and I heard that internet cafes that utilize 2 internet connections, possibly from different providers, and have some sort of router that allows them to split the traffic between the both of them, with online games going through one and web traffic going through another. Is this possible? What is the technical term for it, and can/should it be applied to a home network setup or is there another solution to this problem?

  Read the article

• MacOS X 10.6 Portable Home Directory sync fails due to FileSync agent crashing

  - by tegbains

  On one of our cleanly installed MacPro machines running MacOS X 10.6.6 connected to our MacOS X 10.6.6 Server, syncing data using Portable Home Directories fails. It seems to be due to the filesync agent crashing during the home sync. We get -41 and -8026 errors, which we are suspecting are indicating that there is too much data or filesync agent can't read the files. The user is the owner of the files and can read/write to all of the files. < Logout 0:: [11/02/04 13:10:42.751] Error -41 copying /Volumes/RCAUsers/earlpeng/Library/Mail/Mailboxes/email from old imac./Attachments/12081/2.2. (source = NO) < Logout 0:: [11/02/04 13:10:42.758] Error -8062 copying /Volumes/RCAUsers/earlpeng/Library/Mail/Mailboxes/email from old imac./Attachments/12081/2.2/[email protected]. (source = NO) < Logout 1:: [11/02/04 13:10:42.758] -[DeepCopyContext deepCopyError:sourceError:sourceRef:]: error = -8062, wasSource = NO: return shouldContinue = NO

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >