Search Results

Search found 20142 results on 806 pages for 'expected exception'.

Page 166/806 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

  • growing EBS RAID volume

    - by Ryan Fernandes
    I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. Any clue as to what went wrong?

    Read the article

  • Setup MSSQL replication with peer to peer topology: problem setting up Conflict Detection

    - by Roel
    Hi, I'm setting up a SQL Replication strategy, using MSSQL2008 with peer-to-peer publications (2 servers, each one subscribes to the other). I followed this HOWTO from MSDN, and the setup seems to be working fine: add a record to one table on server A, query on server B shows the new record. So far, so good. So far I only have one table 'Templates': Id PK (calculated field) NodeId int default 1/2 (Server A = 1, Server B = 2) LocalId int autoid Name nvarchar(100) Now, I would like to enable 'Conflict detection', which should be enabled by default. But every time I try to save the 'Conflict Detection' feature in the Publication Properties I get the following error: Cannot save Peer conflict detection properties. An exception occurred while executing a Transact-SQL statement or batch.(Microsoft.SqlServer.ConnectionInfo) Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand) at Microsoft.SqlServer.Replication.ReplicationObject.ExecCommand(String commandIn) at Microsoft.SqlServer.Replication.TransPublication.SetPeerConflictDetection(Boolean enablePeerConflictDetection, Int32 peerOriginatorID) at Microsoft.SqlServer.Management.UI.PubPropSubscriptionOptions.SaveP2PConflictDetection() at Microsoft.SqlServer.Management.UI.PubPropSubscriptionOptions.SaveProperties(ExecutionMode& executionResult) Column name 'Id' does not exist in the target table or view. Changed database context to 'TestDB'. (.Net SqlClient Data Provider) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.2531&EvtSrc=MSSQLServer&EvtID=1911&LinkId=20476 Server Name: SERVER_A Error Number: 1911 Severity: 16 State: 1 Line Number: 2 Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) Now, I googled the hell out of this error, and nothing shows up. I also can't seem to find out what the exact target table of the error "Column name 'Id' does not exist..." is. Has anyone every done this successfully? Am I missing something? Having this setup without conflict detection feels pretty useless... EDIT OK, so after some more research and setting up with different databases etc, I found out that the calculated 'Id' column of the Templates table is the culprit. I don't know why, but the replication doesn't seem to allow calculated columns (which are also primary key). It works now too, without the 'Id' column, and using the NodeId and LocalId as a combined PK. So now the question is, why isn't it allowed to have a calculated column as PK for replication with conflict detection?

    Read the article

  • sharepoint 2007 access denied when accessing user profiles via ssp

    - by user22215
    Guys I have a really strange problem in regards to sharepoint mysites today I go into user profiles and properties in order to setup a property all of a sudden I get access denied. First off I know that I'm logged in with the correct account after the access denied I decided to click on personalization services and permissions I than get An unhandled exception occurred in the user interface.Exception Information: Cannot complete this action. I'm not seeing anything in the server application logs either. So have any of you guys seen this before is there some kind of way to grant a user account the manage profiles right permission using stsadm. BTW all other fucntions of the ssp are working fine so my question is if the user profiles and my sites of a ssp tanks how do you repair that portion of the ssp? BTW the user accounts that I'm using are site collection owners and also they have full control at the web application level. I actually ran across this interesting post but this does not really help my problem. http://blog.tylerholmes.com/2008/09/access-denied-for-site-collection.html

    Read the article

  • Sendmail background process sometimes processes queue, but sendmail -q always works

    - by markmcb
    I'm using sendmail version 8.14.4 on Fedora 15 to send email. My Rails app uses delayed_job to queue up emails. Messages will queue up in /var/spool/mqueue as expected, but don't always get processed. I can see the messages and sendmail is definitely running in the background. Restarting the process does nothing. However, when I issue the sendmail -q command, sendmail gets to work and starts sending. The really odd thing is that this behavior only occurs sometimes. Other times message queue up and are delivered as expected. I've tried tweaking various sendmail configs to reduce the time between queue processing (for example, adding define('confMIN_QUEUE_AGE', '0')dnl to /etc/mail/sendmail.mc), but nothing seems to do the trick. Any ideas what might be the root cause?

    Read the article

  • Error deploying Spring with JAX-WS application in Jboss 6 server

    - by arlahiru
    I'm getting this error when I deploying spring+JAX-WS application in jboss server 6.1.0. 09:14:38,175 ERROR [org.springframework.web.context.ContextLoader] Context initialization failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'com.sun.xml.ws.transport.http.servlet.SpringBinding#0' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Cannot create inner bean '(inner bean)' of type [org.jvnet.jax_ws_commons.spring.SpringService] while setting bean property 'service'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name '(inner bean)': FactoryBean threw exception on object creation; nested exception is java.lang.LinkageError: loader constraint violation: when resolving field "DATETIME" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the referring class, javax/xml/datatype/DatatypeConstants, and the class loader (instance of <bootloader>) for the field's resolved type, loader constraint violation: when resolving field "DATETIME" the class loader at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:230) [:2.5.6] at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:122) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) [:2.5.6] at java.security.AccessController.doPrivileged(Native Method) [:1.7.0_05] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) [:2.5.6] at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) [:2.5.6] at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429) [:2.5.6] at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728) [:2.5.6] at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380) [:2.5.6] at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255) [:2.5.6] at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) [:2.5.6] at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) [:2.5.6] at org.apache.catalina.core.StandardContext.contextListenerStart(StandardContext.java:3369) [:6.1.0.Final] at org.apache.catalina.core.StandardContext.start(StandardContext.java:3828) [:6.1.0.Final] at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeployInternal(TomcatDeployment.java:294) [:6.1.0.Final] at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeploy(TomcatDeployment.java:146) [:6.1.0.Final] at org.jboss.web.deployers.AbstractWarDeployment.start(AbstractWarDeployment.java:476) [:6.1.0.Final] at org.jboss.web.deployers.WebModule.startModule(WebModule.java:118) [:6.1.0.Final] at org.jboss.web.deployers.WebModule.start(WebModule.java:95) [:6.1.0.Final] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [:1.7.0_05] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) [:1.7.0_05] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [:1.7.0_05] at java.lang.reflect.Method.invoke(Method.java:601) [:1.7.0_05] at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:157) [:6.0.0.GA] at org.jboss.mx.server.Invocation.dispatch(Invocation.java:96) [:6.0.0.GA] at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) [:6.0.0.GA] at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:271) [:6.0.0.GA] at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:670) [:6.0.0.GA] at org.jboss.system.microcontainer.ServiceProxy.invoke(ServiceProxy.java:206) [:2.2.0.SP2] at $Proxy41.start(Unknown Source) at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:53) [:2.2.0.SP2] at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:41) [:2.2.0.SP2] at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:379) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.system.microcontainer.ServiceControllerContext.install(ServiceControllerContext.java:301) [:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2044) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1083) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1322) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1246) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1139) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:939) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:654) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.system.ServiceController.doChange(ServiceController.java:671) [:6.1.0.Final (Build SVNTag:JBoss_6.1.0.Final date: 20110816)] at org.jboss.system.ServiceController.start(ServiceController.java:443) [:6.1.0.Final (Build SVNTag:JBoss_6.1.0.Final date: 20110816)] at org.jboss.system.deployers.ServiceDeployer.start(ServiceDeployer.java:189) [:6.1.0.Final] at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:102) [:6.1.0.Final] at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:49) [:6.1.0.Final] at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:63) [:2.2.2.GA] at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:55) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1832) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1550) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1571) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1491) [:2.2.2.GA] at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:379) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2044) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1083) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1322) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1246) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1139) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:939) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:654) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.deployers.plugins.deployers.DeployersImpl.change(DeployersImpl.java:1983) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:1076) [:2.2.2.GA] at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:679) [:2.2.2.GA] at org.jboss.system.server.profileservice.deployers.MainDeployerPlugin.process(MainDeployerPlugin.java:106) [:6.1.0.Final] at org.jboss.profileservice.dependency.ProfileControllerContext$DelegateDeployer.process(ProfileControllerContext.java:143) [:0.2.2] at org.jboss.profileservice.plugins.deploy.actions.DeploymentStartAction.doPrepare(DeploymentStartAction.java:98) [:0.2.2] at org.jboss.profileservice.management.actions.AbstractTwoPhaseModificationAction.prepare(AbstractTwoPhaseModificationAction.java:101) [:0.2.2] at org.jboss.profileservice.management.ModificationSession.prepare(ModificationSession.java:87) [:0.2.2] at org.jboss.profileservice.management.AbstractActionController.internalPerfom(AbstractActionController.java:234) [:0.2.2] at org.jboss.profileservice.management.AbstractActionController.performWrite(AbstractActionController.java:213) [:0.2.2] at org.jboss.profileservice.management.AbstractActionController.perform(AbstractActionController.java:150) [:0.2.2] at org.jboss.profileservice.plugins.deploy.AbstractDeployHandler.startDeployments(AbstractDeployHandler.java:168) [:0.2.2] at org.jboss.profileservice.management.upload.remoting.DeployHandlerDelegate.startDeployments(DeployHandlerDelegate.java:74) [:6.1.0.Final] at org.jboss.profileservice.management.upload.remoting.DeployHandler.invoke(DeployHandler.java:156) [:6.1.0.Final] at org.jboss.remoting.ServerInvoker.invoke(ServerInvoker.java:967) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.completeInvocation(ServerThread.java:791) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.processInvocation(ServerThread.java:744) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.dorun(ServerThread.java:548) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.run(ServerThread.java:234) [:6.1.0.Final] Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name '(inner bean)': FactoryBean threw exception on object creation; nested exception is java.lang.LinkageError: loader constraint violation: when resolving field "DATETIME" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the referring class, javax/xml/datatype/DatatypeConstants, and the class loader (instance of <bootloader>) for the field's resolved type, loader constraint violation: when resolving field "DATETIME" the class loader at org.springframework.beans.factory.support.FactoryBeanRegistrySupport$1.run(FactoryBeanRegistrySupport.java:127) [:2.5.6] at java.security.AccessController.doPrivileged(Native Method) [:1.7.0_05] at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.doGetObjectFromFactoryBean(FactoryBeanRegistrySupport.java:116) [:2.5.6] at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.getObjectFromFactoryBean(FactoryBeanRegistrySupport.java:98) [:2.5.6] at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:223) [:2.5.6] ... 89 more Caused by: java.lang.LinkageError: loader constraint violation: when resolving field "DATETIME" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the referring class, javax/xml/datatype/DatatypeConstants, and the class loader (instance of <bootloader>) for the field's resolved type, loader constraint violation: when resolving field "DATETIME" the class loader at com.sun.xml.bind.v2.model.impl.RuntimeBuiltinLeafInfoImpl.<clinit>(RuntimeBuiltinLeafInfoImpl.java:263) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeTypeInfoSetImpl.<init>(RuntimeTypeInfoSetImpl.java:65) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.createTypeInfoSet(RuntimeModelBuilder.java:133) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.createTypeInfoSet(RuntimeModelBuilder.java:85) [:2.2] at com.sun.xml.bind.v2.model.impl.ModelBuilder.<init>(ModelBuilder.java:156) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.<init>(RuntimeModelBuilder.java:93) [:2.2] at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(JAXBContextImpl.java:473) [:2.2] at com.sun.xml.bind.v2.runtime.JAXBContextImpl.<init>(JAXBContextImpl.java:319) [:2.2] at com.sun.xml.bind.v2.runtime.JAXBContextImpl$JAXBContextBuilder.build(JAXBContextImpl.java:1170) [:2.2] at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:188) [:2.2] at com.sun.xml.bind.api.JAXBRIContext.newInstance(JAXBRIContext.java:111) [:2.2] at com.sun.xml.ws.developer.JAXBContextFactory$1.createJAXBContext(JAXBContextFactory.java:113) [:2.2.3] at com.sun.xml.ws.model.AbstractSEIModelImpl$1.run(AbstractSEIModelImpl.java:166) [:2.2.3] at com.sun.xml.ws.model.AbstractSEIModelImpl$1.run(AbstractSEIModelImpl.java:159) [:2.2.3] at java.security.AccessController.doPrivileged(Native Method) [:1.7.0_05] at com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:158) [:2.2.3] at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:99) [:2.2.3] at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:250) [:2.2.3] at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:343) [:2.2.3] at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:205) [:2.2.3] at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:513) [:2.2.3] at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:333) [:] at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:45) [:] at org.springframework.beans.factory.support.FactoryBeanRegistrySupport$1.run(FactoryBeanRegistrySupport.java:121) [:2.5.6] ... 93 more *** DEPLOYMENTS IN ERROR: Name -> Error vfs:///usr/jboss/jboss-6.1.0.Final/server/default/deploy/SpringWS.war -> org.jboss.deployers.spi.DeploymentException: URL file:/usr/jboss/jboss-6.1.0.Final/server/default/tmp/vfs/automountb159aa6e8c1b8582/SpringWS.war-4ec4d0151b4c7d7/ deployment failed DEPLOYMENTS IN ERROR: Deployment "vfs:///usr/jboss/jboss-6.1.0.Final/server/default/deploy/SpringWS.war" is in error due to the following reason(s): org.jboss.deployers.spi.DeploymentException: URL file:/usr/jboss/jboss-6.1.0.Final/server/default/tmp/vfs/automountb159aa6e8c1b8582/SpringWS.war-4ec4d0151b4c7d7/ deployment failed But this application is workinng correctly in glassfish 3.x server and web service is up and running. I'm using Netbeans IDE in Ubuntu 12.04 to build and deploy the application and I couldn't figure out what is the issue here. I guess its about spring and jboss because its working in glassfish smoothly. Please help me to solve this issue. Thanks all in advance.

    Read the article

  • Impersonation on IIS 7.0 passes the machine credentials for Crystal Reports

    - by pknox
    On a 32-bit Windows 2008 server running the Donor2 Application in the Classic .NET Managed Pipeline mode, configured for Windows Integrated Authentication and Impersonation, all of the .NET pages are passing the authenticated user’s credentials [DomainName\UserName]. This is the correct, expected behavior. The Crystal Reports pages, instead of passing the authenticated user’s credentials, are passing the IIS Server’s credentials [DomainName\MachineName$]. One of the very frustrating aspects of this situation is that I have another server which, as far as I can tell, is configured identically. That server, when loading Crystal Reports, is passing the authenticated user’s credentials [DomainName\UserName] as expected. I have obviously missed something, but I have no idea what it could be.

    Read the article

  • iMac OSX Lion upgrade - Photo Booth stopped working

    - by Tawani
    After I upgraded my [2009] iMac to OSX Lion (a few days ago), the Photo Booth program stopped working. When I click on the icon, all I get is the following error message: Photo Booth cannot be opened because of a problem With the following stack trace: Process: Photo Booth [1367] Path: /Users/USER/Desktop/*/Photo Booth.app/Contents/MacOS/Photo Booth Identifier: com.apple.PhotoBooth Version: 3.0.1 (117) Build Info: PhotoBooth-1170000~3 Code Type: X86-64 (Native) Parent Process: launchd [149] Date/Time: 2011-07-27 20:48:00.458 -0400 OS Version: Mac OS X 10.7 (11A511) Report Version: 9 Sleep/Wake UUID: BA40DCC4-26BB-480D-9590-709AA598D4CF Interval Since Last Report: 187610 sec Crashes Since Last Report: 10 Per-App Crashes Since Last Report: 7 Anonymous UUID: 9994E544-979E-4577-9413-0D163B53E3B9 Crashed Thread: 0 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Symbol not found: _kFigTimeInvalid Referenced from: /Users/USER/Desktop/*/Photo Booth.app/Contents/MacOS/Photo Booth Expected in: /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia in /Users/USER/Desktop/*/Photo Booth.app/Contents/MacOS/Photo Booth PS: I also installed OSX Lion on my MacBook Air and had no issues.

    Read the article

  • Windows Vista SP2 and DEP Woes for Older Program

    - by neezer
    I have a database client (4D 2004 Client... which, for the record, I vehemently hate but am forced to use because our company is still running this) that I'm trying to run in Windows Vista SP2. I've added the program to the DEP Exceptions list (per a 4D tech article detailing this problem... sorry, can't find the link now) and restarted the computer, but every time I try to log-in to our remote database, the program is shut down by Vista, citing a DEP event. And yes, I have restarted the computer several times, so the new DEP settings should be in effect. I'm a bit confused at this since I specifically added the 4DClient.exe to the DEP Exception list! I realize that very few (if any) of you might have this exact problem with this exact program, but can anyone shed light on the fact that DEP still seems to be enabled for a program that I've specifically added to the DEP exception list?!?

    Read the article

  • Cygwin Python and Windows Ruby

    - by Cheezo
    I have a peculiar setup as follows: I have cygwin installed on a Windows 7 machine. I need execute a python script setup in cygwin from the windows CLI. This works fine : c:\cygwin\bin\python2.6.exe c:\cygwin\bin\python-script This python-script accesses a file: ~/.some_config_file which translates to /home/user-name when i execute it from Windows as above. So this works as expected. Now, the next step is to execute this python script from ruby(which is setup on Windows natively w/o Cygwin). When i execute the script from ruby, the ~/.some_config_file translates to /cygdrive/c/Users/user-name instead of the expected /home/user-name leading to the script failing. I understand that something in the environment, PATH etc needs to be set correctly although i cannot seem to find what exactly.

    Read the article

  • Server Configuration / Important Parameter for 500Req/Second

    - by Sparsh Gupta
    I am configuring a server to be used as nginx server for a very heavy traffic website. It is expected to receive traffic from a large number of IP addresses simultaneously. It is expected to get 500Req/Second with atleast 20Million unique IPs connecting it. One of the problems I noticed in my previos server was related to iptables / ipconntrack. I am not aware of this behaviour and would be glad to know which all parameters of a ubuntu / debian (32/64) bit machine should I tweek to get maximum performance from the server. I can put in a lot of RAM on the server but mission critical task is the response times. We ideally dont want any connection to be hanging / timing out / waiting and want as low as possible overall response times. P.S. We are also looking for a kick ass freelancer system admin who can help us figuring / setting this all up. Reach me incase you have some spare time and interested in working on some very heavy traffic website servers.

    Read the article

  • MySQL: Pacemaker cannot start the failed master as a new slave?

    - by quanta
    I'm going to setup failover for MySQL replication (1 master and 1 slave) follow this guide: https://github.com/jayjanssen/Percona-Pacemaker-Resource-Agents/blob/master/doc/PRM-setup-guide.rst Here're the output of crm configure show: node serving-6192 \ attributes p_mysql_mysql_master_IP="192.168.6.192" node svr184R-638.localdomain \ attributes p_mysql_mysql_master_IP="192.168.6.38" primitive p_mysql ocf:percona:mysql \ params config="/etc/my.cnf" pid="/var/run/mysqld/mysqld.pid" socket="/var/lib/mysql/mysql.sock" replication_user="repl" replication_passwd="x" test_user="test_user" test_passwd="x" \ op monitor interval="5s" role="Master" OCF_CHECK_LEVEL="1" \ op monitor interval="2s" role="Slave" timeout="30s" OCF_CHECK_LEVEL="1" \ op start interval="0" timeout="120s" \ op stop interval="0" timeout="120s" primitive writer_vip ocf:heartbeat:IPaddr2 \ params ip="192.168.6.8" cidr_netmask="32" \ op monitor interval="10s" \ meta is-managed="true" ms ms_MySQL p_mysql \ meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true" globally-unique="false" target-role="Master" is-managed="true" colocation writer_vip_on_master inf: writer_vip ms_MySQL:Master order ms_MySQL_promote_before_vip inf: ms_MySQL:promote writer_vip:start property $id="cib-bootstrap-options" \ dc-version="1.0.12-unknown" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1341801689" property $id="mysql_replication" \ p_mysql_REPL_INFO="192.168.6.192|mysql-bin.000006|338" crm_mon: Last updated: Mon Jul 9 10:30:01 2012 Stack: openais Current DC: serving-6192 - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, 2 expected votes 2 Resources configured. ============ Online: [ serving-6192 svr184R-638.localdomain ] Master/Slave Set: ms_MySQL Masters: [ serving-6192 ] Slaves: [ svr184R-638.localdomain ] writer_vip (ocf::heartbeat:IPaddr2): Started serving-6192 Editing /etc/my.cnf on the serving-6192 of wrong syntax to test failover and it's working fine: svr184R-638.localdomain being promoted to become the master writer_vip switch to svr184R-638.localdomain Current state: Last updated: Mon Jul 9 10:35:57 2012 Stack: openais Current DC: serving-6192 - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, 2 expected votes 2 Resources configured. ============ Online: [ serving-6192 svr184R-638.localdomain ] Master/Slave Set: ms_MySQL Masters: [ svr184R-638.localdomain ] Stopped: [ p_mysql:0 ] writer_vip (ocf::heartbeat:IPaddr2): Started svr184R-638.localdomain Failed actions: p_mysql:0_monitor_5000 (node=serving-6192, call=15, rc=7, status=complete): not running p_mysql:0_demote_0 (node=serving-6192, call=22, rc=7, status=complete): not running p_mysql:0_start_0 (node=serving-6192, call=26, rc=-2, status=Timed Out): unknown exec error Remove the wrong syntax from /etc/my.cnf on serving-6192, and restart corosync, what I would like to see is serving-6192 was started as a new slave but it doesn't: Failed actions: p_mysql:0_start_0 (node=serving-6192, call=4, rc=1, status=complete): unknown error Here're snippet of the logs which I'm suspecting: Jul 09 10:46:32 serving-6192 lrmd: [7321]: info: rsc:p_mysql:0:4: start Jul 09 10:46:32 serving-6192 lrmd: [7321]: info: RA output: (p_mysql:0:start:stderr) Error performing operation: The object/attribute does not exist Jul 09 10:46:32 serving-6192 crm_attribute: [7420]: info: Invoked: /usr/sbin/crm_attribute -N serving-6192 -l reboot --name readable -v 0 The full logs: http://fpaste.org/AyOZ/ The strange thing is I can starting it manually: export OCF_ROOT=/usr/lib/ocf export OCF_RESKEY_config="/etc/my.cnf" export OCF_RESKEY_pid="/var/run/mysqld/mysqld.pid" export OCF_RESKEY_socket="/var/lib/mysql/mysql.sock" export OCF_RESKEY_replication_user="repl" export OCF_RESKEY_replication_passwd="x" export OCF_RESKEY_test_user="test_user" export OCF_RESKEY_test_passwd="x" sh -x /usr/lib/ocf/resource.d/percona/mysql start: http://fpaste.org/RVGh/ Did I make something wrong?

    Read the article

  • Help with Windows 7 BSOD with windbg minidump !analyze -v results

    - by Kurt Harless
    Hi gang, Windows 7 X64 Ultimate is BSODing occasionally. I suspect an overheating issue or something related to the use of my GTX-295 card that runs very hot. Here is an !analyze -v listing of the most recent minidump. Any and all help greatly appreciated. Kurt Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\122810-31387-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16617.amd64fre.win7_gdr.100618-1621 Machine Name: Kernel base = 0xfffff800`03065000 PsLoadedModuleList = 0xfffff800`032a2e50 Debug session time: Tue Dec 28 11:04:03.597 2010 (UTC - 7:00) System Uptime: 2 days 2:28:40.407 Loading Kernel Symbols ............................................................... ................................................................ .............................................. Loading User Symbols Loading unloaded module list ................ ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff800033b8873, fffff8800e322dc0, 0} Probably caused by : ntkrnlmp.exe ( nt!RtlCompareUnicodeStrings+c3 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff800033b8873, Address of the instruction which caused the bugcheck Arg3: fffff8800e322dc0, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] CONTEXT: fffff8800e322dc0 -- (.cxr 0xfffff8800e322dc0) rax=0000000000000041 rbx=fffff8a015a3c1c0 rcx=0000000000000024 rdx=0000000000000003 rsi=fffff8800e3238b0 rdi=0000000000000009 rip=fffff800033b8873 rsp=fffff8800e323798 rbp=000000000000000d r8=fffff8a018cb374c r9=000000200a98fdc4 r10=fffff8800e323988 r11=fffff8800e32398e r12=fffff8a018127c18 r13=fffff8800126e550 r14=0000000000000001 r15=fffffa800abe1570 iopl=0 nv up ei pl nz ac po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010216 nt!RtlCompareUnicodeStrings+0xc3: fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] ss:0018:fffff880`0e3237b0=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: ccSvcHst.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff800033b8873 STACK_TEXT: fffff880`0e323798 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlCompareUnicodeStrings+0xc3 FOLLOWUP_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!RtlCompareUnicodeStrings+c3 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9 STACK_COMMAND: .cxr 0xfffff8800e322dc0 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 Followup: MachineOwner ---------

    Read the article

  • NFS inherit permissions from shared directory - Mac OS client

    - by devius
    Short question: Is there a way to have files on a NFS share on the client inherit the permissions of the shared directory? Scenario: Ubuntu 12.04 server Mac 10.7.4 client shared directory has 775 permissions created files on client have 644 permissions I tried setting ACLs with the setfacl command, as explained here, and it appears they are set on the server. getfacl returns this: # file: Documents/ # owner: someguy # group: somegroup # flags: -s- user::rwx group::rwx other::r-x default:user::rwx default:group::rwx default:group:somegroup:rwx default:mask::rwx default:other::r-x However, when I create a new file on the Mac OS client it still has 644 permissions and not the 664 I would expect. Files created on the server have the expected permissions. Files created with another Ubuntu client also have the expected permissions.

    Read the article

  • Slow logins with roaming profiles

    - by tliff
    We are running an ActiveDirectory environment with Windows 2008 as DC and Samba 3.3 as fileserver, using roaming profiles. Some of our offices are connected to HQ via slowish links (1/2 Mbit). Naturally this is not very fast but that was expected. What I do not understand is, that if a user logs out (taking a long time to sync, as expected) and then logs in again the next day it also takes a long time to login. And that is what I don't understand. Shouldn't the sync recognize that nothing has changed rather quickly? Also: Is there any decent docu on how the synchronization is implemented?

    Read the article

  • Playing an Online mp3

    - by Mohsen
    I have a problem with playing online mp3s. I'm using latest version of javazoom's jlayer and basicplayer. Here is the exception: Caused by: javazoom.jlgui.basicplayer.BasicPlayerException: java.io.EOFException at javazoom.jlgui.basicplayer.BasicPlayer.initAudioInputStream(Unknown Source) at javazoom.jlgui.basicplayer.BasicPlayer.open(Unknown Source) ... 12 more Caused by: java.io.EOFException at java.io.DataInputStream.readInt(DataInputStream.java:375) at com.sun.media.sound.WaveFileReader.getFMT(WaveFileReader.java:244) at com.sun.media.sound.WaveFileReader.getAudioFileFormat(WaveFileReader.java:85) at javax.sound.sampled.AudioSystem.getAudioFileFormat(AudioSystem.java:985) at javazoom.jlgui.basicplayer.BasicPlayer.initAudioInputStream(Unknown Source) ... 15 more My java is 1.6.0_16. Certain files cannot be player through the Internet. I have a set of mp3s, playing one after the other. Randomly one mp3 doesn't work throwing above exception. Some mp3s can be played by calling again play() method if javazoom's basicplayer, but others can never be played online. I was able to find this post but I doubt if this really relates to my directx version or something. Mohsen

    Read the article

  • Postfix relay to multiple servers and multiple users

    - by Frankie
    I currently have postfix configured so that all users get relayed by the local machine with the exception of one user that gets relayed via gmail. To that extent I've added the following configuration: /etc/postfix/main.cf # default options to allow relay via gmail smtp_use_tls=yes smtp_sasl_auth_enable = yes smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt smtp_sasl_security_options = noanonymous # map the relayhosts according to user sender_dependent_relayhost_maps = hash:/etc/postfix/relayhost_maps # keep a list of user and passwords smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd /etc/postfix/relayhost_maps user-one@localhost [smtp.gmail.com]:587 /etc/postfix/sasl_passwd [smtp.gmail.com]:587 [email protected]:user-one-pass-at-google I know I can map multiple users to multiple passwords using smtp_sasl_password_maps but that would mean that all relay would be done by gmail where I specifically want all relay to be done by the localhost with the exception of some users. Now I would like to have a user-two@localhost (etc) relay via google with their own respective passwords. Is that possible?

    Read the article

  • Powershell import-module webadministration

    - by David
    Every time I execute this command invoke-command -computername REMOTEPC -scriptblock { import-module WebAdministration; new-item "$env:systemdrive\inetpub\testsite" -type directory; New-WebSite -Name TestSite -Port 81 -PhysicalPath "$env:systemdrive\inetpub\testsite" } I get the following error Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING)) + CategoryInfo : NotSpecified: (:) [Get-ChildItem], COMException + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetChildItemCommand The website is created successfully as far as I can see. The following command gives the same error when enumerating the testsite Invoke-Command -computername REMOTEPC { import-module webadministration; dir -path IIS:\Sites\ } Name ID State Physical Path Bindings PSComputerName Default Web Site 1 Started http *:80: REMOTEPC Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING)) + CategoryInfo : NotSpecified: (:) [Get-ChildItem], COMException + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetChildItemCo mmand Any suggestions would be appreciated

    Read the article

  • Why does httpd handle requests for wrong hostnames in SSL mode?

    - by Manuel
    I have an SSL-enabled virtual host for my sites at example.com:10443 Listen 10443 <VirtualHost _default_:10443> ServerName example.com:10443 ServerAdmin [email protected] ErrorLog "/var/log/httpd/error_log" TransferLog "/var/log/httpd/access_log" SSLEngine on SSLProtocol all -SSLv2 SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 SSLCertificateFile "/etc/ssl/private/example.com.crt" SSLCertificateKeyFile "/etc/ssl/private/example.com.key" SSLCertificateChainFile "/etc/ssl/private/sub.class1.server.ca.pem" SSLCACertificateFile "/etc/ssl/private/StartCom.pem" </VirtualHost> Browsing to https://example.com:10443/ works as expected. However, also browsing to https://subdomain.example.com:10443/ (with DNS set) shows me the same pages (after SSL certificate warning). I would have expected the directive ServerName example.com:10443 to reject all connection attempts to other server names. How can I tell the virtual host not to serve requests for URLs other than the top-level one?

    Read the article

  • How do I make Home / End keys behave Windows/Linux like in Terminal.app on Mac OS on Mac Pro laptop?

    - by Nick Gorbikoff
    Hello. I was wondering if somebody knows how to use home/end keys behave in a Windows/ Linux fashion. What I mean is that when I press Apple + Left (Home combo on a mac book pro laptop) it should go to the beginning of the line, and Apple + Right to the end of the line. Right now they change focus to the top of the scroll history. Drives me crazy. Home / End keys behave as expected in TextMate and such but not in terminal, which makes me think it's that app specific. I found some page saying that I need to remap key bindings but I can't do that on every mac i touch. So is there another shorcut in Mac I can use or how do I make Home/End keys behave as expected? Thank you

    Read the article

  • ubuntu 8.04lts + rdiff-backup: Should I install from source instead of using apt repositories?

    - by egarcia
    I'm trying to use rdiff-backup in order to make backup copies of some folders inside an Ubuntu 8.04LTS server. I'm attempting to do the backup on another server with a more modern Ubuntu distro (9.10). I'll call this one the "client". rdiff-backup needs to be installed on both the client and the server. It is available on the apt repositories on both machines, so I installed it using sudo apt-get install rdiff-backup. The problem is that the version installed on the server is older than the one on the client (1.1.15 vs 1.2.8). Thus I get errors when I try do make them work together. So I need both versions to be the same. What is the standard procedure in these cases? Should I attempt to upgrade the version on the server, or downgrade the version on the client? And how whould I do that? In case it is useful, I'd like to point out that the rdiff-backup apt-package has some dependencies - librsync1 & python-support Attaching the errors I got in case they help: rdiff-backup egarcia@test::/var/rails/ohwr/backup /home/kikito/backup/files Warning: Local version 1.2.8 does not match remote version 1.1.15. Exception ' Warning Security Violation! Bad request for function: rpath.make_file_dict with arguments: ['/var/rails/ohwr/backup'] ' raised of class '<class 'rdiff_backup.Security.Violation'>': File "/usr/lib/pymodules/python2.6/rdiff_backup/Main.py", line 304, in error_check_Main try: Main(arglist) File "/usr/lib/pymodules/python2.6/rdiff_backup/Main.py", line 321, in Main rps = map(SetConnections.cmdpair2rp, cmdpairs) File "/usr/lib/pymodules/python2.6/rdiff_backup/SetConnections.py", line 78, in cmdpair2rp return rpath.RPath(conn, filename).normalize() File "/usr/lib/pymodules/python2.6/rdiff_backup/rpath.py", line 884, in __init__ else: self.setdata() File "/usr/lib/pymodules/python2.6/rdiff_backup/rpath.py", line 908, in setdata self.data = self.conn.rpath.make_file_dict(self.path) File "/usr/lib/pymodules/python2.6/rdiff_backup/connection.py", line 450, in __call__ return apply(self.connection.reval, (self.name,) + args) File "/usr/lib/pymodules/python2.6/rdiff_backup/connection.py", line 370, in reval if isinstance(result, Exception): raise result Traceback (most recent call last): File "/usr/bin/rdiff-backup", line 30, in <module> rdiff_backup.Main.error_check_Main(sys.argv[1:]) File "/usr/lib/pymodules/python2.6/rdiff_backup/Main.py", line 304, in error_check_Main try: Main(arglist) File "/usr/lib/pymodules/python2.6/rdiff_backup/Main.py", line 321, in Main rps = map(SetConnections.cmdpair2rp, cmdpairs) File "/usr/lib/pymodules/python2.6/rdiff_backup/SetConnections.py", line 78, in cmdpair2rp return rpath.RPath(conn, filename).normalize() File "/usr/lib/pymodules/python2.6/rdiff_backup/rpath.py", line 884, in __init__ else: self.setdata() File "/usr/lib/pymodules/python2.6/rdiff_backup/rpath.py", line 908, in setdata self.data = self.conn.rpath.make_file_dict(self.path) File "/usr/lib/pymodules/python2.6/rdiff_backup/connection.py", line 450, in __call__ return apply(self.connection.reval, (self.name,) + args) File "/usr/lib/pymodules/python2.6/rdiff_backup/connection.py", line 370, in reval if isinstance(result, Exception): raise result rdiff_backup.Security.Violation: Warning Security Violation! Bad request for function: rpath.make_file_dict with arguments: ['/var/rails/ohwr/backup']

    Read the article

  • Remote deploying wars to a liferay installation

    - by iftrue
    With vanilla tomcat, you can POST to URLs beneath SOMURL/manager/ with a proper manager user role defined. The liferay deployment of tomcat, however, is missing the manager and host-manager applications, and when I copy the directories from a vanilla Tomcat installation, I get the exception below: Exception: javax.servlet.ServletException: Error allocating a servlet instance org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) java.lang.Thread.run(Thread.java:636) root cause java.lang.SecurityException: Servlet of class org.apache.catalina.manager.HTMLManagerServlet is privileged and cannot be loaded by this web application org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) java.lang.Thread.run(Thread.java:636) What's the proper way to remote deploy wars to a liferay instance? (Not portlets, in my case.)

    Read the article

  • sudo displays typed password in bash script

    - by Andy
    Hullo, I have a bash script that uses sudo a few times. There's a couple of strange points about it though. It asks me for my password a few seconds after I've already entered it for a previous command. The second time I enter my password, it's echoed to the display. Here's the relevant bits of the script. sudo service apache2 stop drush sql-dump --root="$SITE_DIR" --structure-tables-key=svn --ordered-dump | grep -iv 'dump completed on' | sudo tee "$DB_DIR/${SITE_NAME}.sql" > /dev/null sudo svn diff "$DB_DIR" | less sudo svn commit -m "$MESSAGE" "$DB_DIR" sudo service apache2 start The first password is to stop apache, and it works as expected. As mentioned, the sudo tee doesn't 'remember' that I have elevated privileges, asks for the password again, and echoes it to the screen. Given that tee is all about echoing to screen, I've played around a little with simple scripts which have | sudo tee, and they all work as expected. Ideas?! TIA Andy

    Read the article

  • Is there any way to stop or pause Windows fake-raid re-synching?

    - by haimg
    I have two physical disks, each one holds two volumes, they are Windows fake-RAID1. E.g.: Disk A: Partition1 Partition2 Disk B: Partition1-Mirror Partition2-Mirror After an unclean reboot, Windows started resynching these as expected. What was not expected, however, is that it started resynching both volumes at the same time. Both disks seek back and forth like crazy, and synching performance is horrible. Question: Is these any option to stop or pause synching of just one volume? I know I can put one of the disks offline, but that will stop synchronization of all volumes on that disk. Note: I have certain reasons why I need to torture myself with Windows RAID. I'm not interested in alternative RAID solutions right now.

    Read the article

  • How to Reinstalling MSSQL Server 2008 with SP1? (Windows 7)

    - by n10i
    I am using Windows 7 Ultimate x64. I had earlier installed SQL server 2008 with SP1 with Visual Studio 2008 Team System with sp1. Now that VS2010 is out I wanted to install it so I uninstalled visual studio then MSSLQ Server 2008 SP1 and then SQL Server 2008 as suggested here: h**p://mark.michaelis.net/Blog/SQLServer2008InstallNightmare.aspx But now when I try to reinstall it I am unable to get it right I am getting the ERROR: “Attempted to perform an unauthorized operation.” (Following is part of the log file): 2010-04-16 04:54:57 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: Prompting user if they want to retry this action due to the following failure: 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 04:54:57 Slp: The following is an exception stack listing the exceptions in outermost to innermost order 2010-04-16 04:54:57 Slp: Inner exceptions are being indented 2010-04-16 04:54:57 Slp: 2010-04-16 04:54:57 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Data: 2010-04-16 04:54:57 Slp: WatsonData = Microsoft SQL Server 2010-04-16 04:54:57 Slp: DisableRetry = true 2010-04-16 04:54:57 Slp: Inner exception type: System.UnauthorizedAccessException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Stack: 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd) 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite) 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 10:37:19 Slp: User has chosen to cancel this action 2010-04-16 10:37:19 Slp: Watson Bucket 2 Original Parameter Values 2010-04-16 10:37:19 Slp: Parameter 0 : SQL2008@RTM@ 2010-04-16 10:37:19 Slp: Parameter 2 : System.Security.AccessControl.Win32.GetSecurityInfo 2010-04-16 10:37:19 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1 2010-04-16 10:37:19 Slp: Parameter 4 : System.UnauthorizedAccessException@-2147024891 2010-04-16 10:37:19 Slp: Parameter 5 : SqlBrowserConfigAction_install_ConfigNonRC 2010-04-16 10:37:19 Slp: Parameter 7 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Parameter 8 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Final Parameter Values I have googled around for the error given error but all I could find is to regedit and reset permissions on certain reg keys but I don’t see any reg keys with access problem in the log file the log file can be download here: http://www.mediafire.com/?dznizytjznn. Please guys help me out here I am a developer and I cannot afford an OS reinstallation! Thanks in advance…

    Read the article

  • How to either completely remove SQL Server 2008 R2 Installation or repair it?

    - by Nico
    I've installed MSSQL server correctly, then I took some wrong turns and I'm now left in a pretty undesirable state. I wanted to change the server instance to another drive, so I uninstalled SQL server and all of it's features from the Programs and Features control panel. Now when I tried to install a new instance, I got a few errors, but it still installed most of them: Then I tried to run a repair, which I figured would fix things, but it throws an exception about not being able to read something from the CD (tried more than once always the same exception) Error 1316.A network error occurred while attempting to read from the file R:\1033_ENU_LP\x64\setup\SSCERuntime_x86-enu.msi , and it fails to repair a few of the features: And I don't have the server instance installed either. So I'm left with no MSSQLMS, no server instance, and no happiness. What would be the best course of action here?

    Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >