Search Results

Search found 79916 results on 3197 pages for 'windows look and feel'.

Page 166/3197 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

  • A Look At A New Duplicate Content Technique

    SEO or search engine optimization has always been considered as one of the most effective methods used in Internet marketing. This technique is much similar to SEM or search engine marketing, but off... [Author: Margarette Mcbride - Web Design and Development - May 06, 2010]

    Read the article

  • So I want to separate my Program Files from the hard disk with the other system files. What is the b

    - by grg-n-sox
    So I am running Windows 7 as my only OS. I have two hard drives on my computer. The first one is a 74GB Western Digital 10K RPM Raptor. The second one is a 1TB Seagate Barracuda (couldn't remember if it was a 7200.12 or some other decimal after the 7200). The OS in installed to the Raptor and I am just using the Barracuda for storage. With this setup, in case you couldn't guess already, the Raptor fills up quick and I am constantly having to maintain file locations. And although it is nice to have that quicker boot time and program loading, the time spent maintaining the drive makes me waste more time overall. So I am looking for a way to try to keep it clear while still keeping up system loading speeds. A performance hit on games and such is easily acceptable and as long as I can guarantee a 5GB space on the Raptor, I can always just temporarily move the disc image there. So I am figuring that having games installed like Boarderlands and Mass Effect, as well as having large files such as linux distro DVD disc images in My Documents, I probably should be moving my personal files and Program Files directories to the Barracuda. I currently have folders on the Barracuda for this, but this means routinely copying files over and I can't really do anything with the Program Files folder that already exists. The best I can do is remember to designate the install directory of any program installation to the alternative install directory, which I can't seem to get to ever work right with Steam. With that in mind, is there a way that is not too drastic to let me just change some folders and system settings once and everything works fine afterwards for my setup? I have considered just reinstalling Windows 7 to the Barracuda but that would defeat the purpose of the Raptor except for running disc images off of. I am also heard a bit about being able to use symlinks to fix this, but I have also heard that symlinks in Windows are not necessarily the same and not as well supported on Windows. An example a friend mentioned was something about how if you have a symlink in Windows on a small hard drive to a large hard drive and the contents the symlink points to is larger than the small hard drive's capacity, then Windows will think the smaller hard drive is full. So is there a fix/workaround that will let me use symlinks across hard drives without the issues or is there a better solution I am not being told about, not mentioning, or not thinking of?

    Read the article

  • A quick look at: sys.dm_os_buffer_descriptors

    - by Jonathan Allen
    SQL Server places data into cache as it reads it from disk so as to speed up future queries. This dmv lets you see how much data is cached at any given time and knowing how this changes over time can help you ensure your servers run smoothly and are adequately resourced to run your systems. This dmv gives the number of cached pages in the buffer pool along with the database id that they relate to: USE [tempdb] GO SELECT COUNT(*) AS cached_pages_count , CASE database_id WHEN 32767 THEN 'ResourceDb' ELSE DB_NAME(database_id) END AS Database_name FROM sys.dm_os_buffer_descriptors GROUP BY DB_NAME(database_id) , database_id ORDER BY cached_pages_count DESC; This gives you results which are quite useful, but if you add a new column with the code: …to convert the pages value to show a MB value then they become more relevant and meaningful. To see how your server reacts to queries, start up SSMS and connect to a test server and database – mine is called AdventureWorks2008. Make sure you start from a know position by running: -- Only run this on a test server otherwise your production server's-- performance may drop off a cliff and your phone will start ringing. DBCC DROPCLEANBUFFERS GO Now we can run a query that would normally turn a DBA’s hair white: USE [AdventureWorks2008] go SELECT * FROM [Sales].[SalesOrderDetail] AS sod INNER JOIN [Sales].[SalesOrderHeader] AS soh ON [sod].[SalesOrderID] = [soh].[SalesOrderID] …and then check our cache situation: A nice low figure – not! Almost 2000 pages of data in cache equating to approximately 15MB. Luckily these tables are quite narrow; if this had been on a table with more columns then this could be even more dramatic. So, let’s make our query more efficient. After resetting the cache with the DROPCLEANBUFFERS and FREEPROCCACHE code above, we’ll only select the columns we want and implement a WHERE predicate to limit the rows to a specific customer. SELECT [sod].[OrderQty] , [sod].[ProductID] , [soh].[OrderDate] , [soh].[CustomerID] FROM [Sales].[SalesOrderDetail] AS sod INNER JOIN [Sales].[SalesOrderHeader] AS soh ON [sod].[SalesOrderID] = [soh].[SalesOrderID] WHERE [soh].[CustomerID] = 29722 …and check our effect cache: Now that is more sympathetic to our server and the other systems sharing its resources. I can hear you asking: “What has this got to do with logging, Jonathan?” Well, a smart DBA will keep an eye on this metric on their servers so they know how their hardware is coping and be ready to investigate anomalies so that no ‘disruptive’ code starts to unsettle things. Capturing this information over a period of time can lead you to build a picture of how a database relies on the cache and how it interacts with other databases. This might allow you to decide on appropriate schedules for over night jobs or otherwise balance the work of your server. You could schedule this job to run with a SQL Agent job and store the data in your DBA’s database by creating a table with: IF OBJECT_ID('CachedPages') IS NOT NULL DROP TABLE CachedPages CREATE TABLE CachedPages ( cached_pages_count INT , MB INT , Database_Name VARCHAR(256) , CollectedOn DATETIME DEFAULT GETDATE() ) …and then filling it with: INSERT INTO [dbo].[CachedPages] ( [cached_pages_count] , [MB] , [Database_Name] ) SELECT COUNT(*) AS cached_pages_count , ( COUNT(*) * 8.0 ) / 1024 AS MB , CASE database_id WHEN 32767 THEN 'ResourceDb' ELSE DB_NAME(database_id) END AS Database_name FROM sys.dm_os_buffer_descriptors GROUP BY database_id After this has been left logging your system metrics for a while you can easily see how your databases use the cache over time and may see some spikes that warrant your attention. This sort of logging can be applied to all sorts of server statistics so that you can gather information that will give you baseline data on how your servers are performing. This means that when you get a problem you can see what statistics are out of their normal range and target you efforts to resolve the issue more rapidly.

    Read the article

  • "Run As Administrator" on program right click failing and not launching program

    - by GONeale
    This problem lies within a relatively fresh x64 Windows 7 install ~4 weeks, but is also a problem I have seen on Windows Vista machines (x86 versions). Since the other day, any programs attempted to be launched via right clicking on a shortcut (.lnk)'s context menu and pressing - "Run As Administrator" for instance, in the Quick Launch/Jump List in Windows 7 has failed, screen has not dimmed, no UAC popup. In fact the program does not even load. There is no way around this unless I use the shortcut version from "All Programs" which appears to work, very strange? I have performed no major software installs, nothing out of the ordinary. Has anybody encountered this or know what would be causing it? Here's an example of somebody else experiencing this problem in Vista with no solution: http://www.vistax64.com/vista-general/131918-strange-run-administrator-problem.html and I believe this problem is related, I also cannot right click - "Manage" on my computer): http://windows7forums.com/windows-7-support/5501-run-administrator-broken.html I am running the latest version of Avira AntiVir Virus Scanner and pretty concious of what I download, I don't think it is a virus, nor do I believe it is due to the RC Version of Windows 7, because I have seen the problem across multiple Operating Systems versions. Thanks guys.

    Read the article

  • Remove Desktop entry from alt tab list

    - by MichaelM
    Hi I would like to know whether it is possible to remove the entry for desktop from Windows 7's alt-tab list? So far I have found a post telling me to add an entry to the registry: HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Explorer/AltTabSettings However, this reverts the alt-tab menu back to the Windows XP style, where you don't get window previews. All I really want is for the desktop entry to be gone. Cheers.

    Read the article

  • Shouldn't WP8 Emulator Work With an Intel Q9650?

    - by Al Bundy
    My comp is as follows: -Windows 8 Pro -Visual Studio 12 Pro -Asus P5Q Pro Turbo -Intel Q9650 (Core 2 Quad 3.0 Ghz) As far as I can tell, this setup should support Windows Phone 8 Emulator, but When I installed Windows Phone 8 SDK, it said that my computer doesn't support hardware virtualization. It says here that it does: http://ark.intel.com/products/35428/Intel-Core2-Quad-Processor-Q9650-(12M-Cache-3_00-GHz-1333-MHz-FSB)

    Read the article

  • Mandatory look back at 2010

    - by Bertrand Le Roy
    Yeah, it's one of those posts, sorry. First, the mildly depressing: the most popular post on this blog this year with 47,000 hits was a post from last year about a fix to a bug in ASP.NET. A content-less post except for that link to the KB article that people should have found by going directly to the support site in the first place. Then, the really depressing: the second most popular post this year with 34,000 hits was a post from 2005 about how to display message boxes on a web page. I mean come on. This was kind of fun five years ago and it did solve one of the most common n00b mistakes VB programmers trying to move to the web were making. But come on, we've traveled about 4.7 billion miles around the Earth since then. Do people still do that kind of stuff? I should probably put a big red banner on top of this post. Oh [supernatural entity of your choice]. Hand me that gun, please. Third most popular post with 24,000 hits is from 2004. It's about how to set a session variable before redirecting. That problem has been fixed a long time ago. Oh well. Fourth most popular post. 21,000 hits. 2007. How to work around a stupid bug in ASP.NET Ajax 1.0. Fixed in ASP.NET 3.5? ASP.NET Ajax 1.0? Need I say more? The fifth one (20,000 hits) is an old post as well but I'm kind of fond of it: it's about that photo album handler I've been organically growing for a few years. It reminds me that I need to refresh it and make a new release. Good SEO title too. Back to insanity with the sixth one (16,000) that's about working around a bug in IE6. IE6. Please just refuse to pander to that browser any more. It's about time. Let's move on, please. Actually, the first post from 2010 is 15th in the list. We have a trio of these actually with server-side image resizing and FluentPath. So what happened? Well, I like the ad money, but not to the point that I'm going to write my stuff to inflate it. Actually I think if I tried I would fail miserably (I mean, I would fail worse). What really happened this year was new stuff: Orchard, FluentPath and the stuff with the Netduino. That stuff needs time to get off the ground but my hope is that it's going to be useful in the long run and that five years from now I'll be lamenting on how well those posts are still doing. So, no regret. 2010 was a good year. Oh, and I was on This Developer's Life this year! Yay! Anyways, thank you all for reading me. Please continue doing that. And happy 2011!

    Read the article

  • Live Mesh starts exactly once on fresh Win7 Ultimate installation

    - by Reb.Cabin
    I did a fresh install of Windows 7 Ulimate 64-bit on a formatted drive on a refurbed Lenovo PC, applied all 102 (!) windows updates, windows seems to be working fine. No quirks installing, no apps, no junkware, just straight, legal, Win7 Ultimate right from an unopened 2009 Microsoft box. Ok, breathe sigh -- Install Live Mesh (no messenger, no mail, no writer, no photo, none of the rest of the Windows Live freeware). Set up my shares, let it run overnight. watch MOE.exe in the Task-Manager perf pane to make sure it's all settled down. reboot. Ok, check that MOE is running and files are getting updated properly from other machines in the mesh. Great. HOWEVER -- when I try to launch Windows Live Mesh app from the Start jewel, I get a brief hourglass, then nothing. Reboot. Same story. result -- the shares I already posted seem to be synching properly, but I can't run the app, so I can't add and delete shares. The background process MOE seems to run, but I can't get the app going. btw, the reason I did this fresh install is I had exactly the same experience running Vista, so I wiped the machine hoping it would solve this nasty problem. Imagine my surprise! Will be grateful for clues, advice, etc, please & thanks!

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Computer still in boot loop

    - by user2856410
    My computer is in a boot loop and despite all my efforts, I haven't been able to load windows XP with it. When the computer loads, I see some white loading bar at the bottom, then the windows XP loading screen, then the DELL boot screen, then windows XP loading screen, and it just keeps looping. The blue screen error is: UNMOUNTABLE_BOOT_VOLUME Stop: 0x000000ED (0x823D6C08, 0xC000009C, 0x000000000, 0x000000000) I have booted using Hiren's mini XP, and ran CHKDSK /f /r, but it didn't affect the boot loop. Is there anything else I can try to get my computer to start up? I don't have my windows XP disc, but I have a dvd burner on another computer, and can burn a downloaded ISO if it could help me get out of this loop. Thanks!

    Read the article

  • SQL SERVER – Shard No More – An Innovative Look at Distributed Peer-to-peer SQL Database

    - by pinaldave
    There is no doubt that SQL databases play an important role in modern applications. In an ideal world, a single database can handle hundreds of incoming connections from multiple clients and scale to accommodate the related transactions. However the world is not ideal and databases are often a cause of major headaches when applications need to scale to accommodate more connections, transactions, or both. In order to overcome scaling issues, application developers often resort to administrative acrobatics, also known as database sharding. Sharding helps to improve application performance and throughput by splitting the database into two or more shards. Unfortunately, this practice also requires application developers to code transactional consistency into their applications. Getting transactional consistency across multiple SQL database shards can prove to be very difficult. Sharding requires developers to think about things like rollbacks, constraints, and referential integrity across tables within their applications when these types of concerns are best handled by the database. It also makes other common operations such as joins, searches, and memory management very difficult. In short, the very solution implemented to overcome throughput issues becomes a bottleneck in and of itself. What if database sharding was no longer required to scale your application? Let me explain. For the past several months I have been following and writing about NuoDB, a hot new SQL database technology out of Cambridge, MA. NuoDB is officially out of beta and they have recently released their first release candidate so I decided to dig into the database in a little more detail. Their architecture is very interesting and exciting because it completely eliminates the need to shard a database to achieve higher throughput. Each NuoDB database consists of at least three or more processes that enable a single database to run across multiple hosts. These processes include a Broker, a Transaction Engine and a Storage Manager.  Brokers are responsible for connecting client applications to Transaction Engines and maintain a global view of the network to keep track of the multiple Transaction Engines available at any time. Transaction Engines are in-memory processes that client applications connect to for processing SQL transactions. Storage Managers are responsible for persisting data to disk and serving up records to the Transaction Managers if they don’t exist in memory. The secret to NuoDB’s approach to solving the sharding problem is that it is a truly distributed, peer-to-peer, SQL database. Each of its processes can be deployed across multiple hosts. When client applications need to connect to a Transaction Engine, the Broker will automatically route the request to the most available process. Since multiple Transaction Engines and Storage Managers running across multiple host machines represent a single logical database, you never have to resort to sharding to get the throughput your application requires. NuoDB is a new pioneer in the SQL database world. They are making database scalability simple by eliminating the need for acrobatics such as sharding, and they are also making general administration of the database simpler as well.  Their distributed database appears to you as a user like a single SQL Server database.  With their RC1 release they have also provided a web based administrative console that they call NuoConsole. This tool makes it extremely easy to deploy and manage NuoDB processes across one or multiple hosts with the click of a mouse button. See for yourself by downloading NuoDB here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: NuoDB

    Read the article

  • A Look at the GridView&apos;s New Sorting Styles in ASP.NET 4.0

    Like every Web control in the ASP.NET toolbox, the GridView includes a variety of style-related properties, including <code>CssClass</code>, <code>Font</code>, <code>ForeColor</code>, <code>BackColor</code>, <code>Width</code>, <code>Height</code>, and so on. The GridView also includes style properties that apply to certain classes of rows in the grid, such as <code>RowStyle</code>, <code>AlternatingRowStyle</code>, <code>HeaderStyle</code>, and <code>PagerStyle</code>. Each of these meta-style properties offer the standard style properties (<code>CssClass</code>, <code>Font</code>, etc.) as subproperties.In ASP.NET 4.0, Microsoft added four new

    Read the article

  • Scripts on UNC paths take very long to run

    - by Álvaro G. Vicario
    I have several scripts in UNC paths (from Windows batch files to PHP scripts). No matter how I run them (double click on explorer, my editor's run command menu or Windows command prompt) they take really long to start running (like 14 seconds). Once they get started they run normally. This doesn't happen if I run them from mapped drives. I'm using Windows XP Professional SP3 inside an Active Directory domain and files are hosted in a Windows Server box (not sure about the version, it's an HP dedicated file server with bundled OS). Why does it happen? Is there a way to speed up things while using UNC paths?

    Read the article

  • Look ma, no plugin!

    The new crop of HTML5 web browsers are capable of some pretty amazing things, and several of our engineers decided to take some 20% time to see how...

    Read the article

  • Remote desktop logs in with saved credentials when connecting from one computer but asks for username and password from another.

    - by AndrejaKo
    I have two computers on which I recently installed windows 7 64 bit. Using VPN, they connect to remote network on which there is a Windows Server 2000 SP4 computer. User is supposed to connect to server using remote desktop. I set same VPN and remote desktop settings on both computers with Windows 7. I set Remote desktop to save connection credentials on both computers, but when I connect to server form one computer, it uses saved credentials and I don't get log-in prompt on server side. On the other computer with same settings using same username and password, I get log-in prompt once the remote desktop connects to server. I even tried copying the .rdp file from the computer on which everything is working fine to the other computer, but that didn't help. Note that I'm not trying to have both computers connected at the same time. What is causing this and how do I make the other computer skip windows server 2000 log-in prompt.

    Read the article

  • How to resolve SSPI context error without changing Service Account from MSSQL

    - by kockiren
    There is a issue while connecting from new Windows 8.1 Clients to SQL Server 2008 running on Windows Server 2008 R2. The SQL Service running under account Domain\mssqlservice on a machine thats works fine I get this output from setspn -l domain\mssqlservice C:\>setspn -l domain\mssqlservice Registrierte Dienstprinzipalnamen (SPN) für CN=MSSQLService,CN=Users,DC=domain, DC=local,DC=tld: MSSQLSvc/mssql.domain.local.tld:1433 MSSQLSvc/mssql.domain.local.tld MSSQLSERVER/mssql.domain.local.tld:1433 On a windows 8.1 machine that don't work I get this output: C:\>setspn -l domain\msssqlservice FindDomainForAccount: Fehler beim Aufrufen von DsGetDcNameWithAccountW mit dem R ückgabewert 0x0000054B. Konto kockiren wurde nicht gefunden. On this Post I found a solution but, I can't change the Service Account who runs the SQL Service. Some application need this service delegation. But how I can realize that it works on my Windows 8.1 Clients?

    Read the article

  • How to install network drivers during installation?

    - by Matt
    I have a server that I'm attempting to install windows onto. However, the disk is an iscsi target provided by ipxe. Everything appears to go well until about 3/4 through the install process I get an error about a critical driver missing and the installation is cancelled. I would say the critical driver would be the network card. It's an intel nic and the drivers are not on the windows installation CD. I tried slipstreaming them with RTSevenLite, but after it created the CD it seems it failed to make it bootable. I've also not been successful in making a bootable USB thumb drive or USB HDD. I suspect a buggy bios even though I have the latest. How to install network drivers during installation? Windows used to provide an optional F6 during install feature but this seems to be missing in Windows Servert 2008. Perhaps there is a way to do this, or another method?

    Read the article

  • Asus AT3-IONT & Win XP

    - by user59178
    Hello! I'm trying to install Windows XP on my nettop (Asus AT3-IONT motherboard). There is a problem - when the progress comes to partition selection, it sees all the partitions on the hard drive, but when I'm selecting any partition, it says that it's not compatible with Windows XP. Windows 7 was installed without any problems, but XP and 2003 R2 have this problem. How can I solve it? P.S. I already have Windows 7, I need exactly XP or 2003 for my work. Thanks.

    Read the article

  • Western Digital not recognized by Windows after power Outage on windows

    - by vikasde
    I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

    Read the article

  • Prevent Win7 boot loader from taking over the WinXP boot loader

    - by Chris
    My setup: 1 physical hard drive (500gb divided equally into 2 partitions) Windows XP Partition (Current OS) Empty Partition where I will be installing Windows 7 My question is how do I prevent the Windows7 boot loader from taking over my WindowsXP boot loader when installing the new OS ? The reason I am asking is because I already have a ghosted backup of my WinXP partition and if I ever need to restore my xp partition using that backup, would it not overwrite the Windows7 boot loader that was placed in the XP partition with the one from the backup, thus making windows 7 unable to boot. Also what would happen if I decided to delete the Windows XP partition altogether somewhere down the road and along with it the Win7 boot loader that was placed there, wouldn't that cause the system not to boot at all.. To avoid these issues, I simply want to make sure that BOTH the Win7 and WinXP boot loaders are available on their respective partitions and they do not interfere with each other in any way. Is this possible? Thx, Chris

    Read the article

  • Asus AT3-IONT & Win XP [closed]

    - by user59178
    Hello! I'm trying to install Windows XP on my nettop (Asus AT3-IONT motherboard). There is a problem - when the progress comes to partition selection, it sees all the partitions on the hard drive, but when I'm selecting any partition, it says that it's not compatible with Windows XP. Windows 7 was installed without any problems, but XP and 2003 R2 have this problem. How can I solve it? P.S. I already have Windows 7, I need exactly XP or 2003 for my work. Thanks.

    Read the article

  • Vista Remote Desktop Mouse Drag Not Working

    - by Paul Lynch
    I've been using Remote Desktop to connect from a Windows Vista machine to a Windows XP machine. Everything used to work fine, but a few weeks ago I found that I could not drag things with my mouse. I can click on things just fine, but I cannot move or resize windows or select text with the mouse. I did some experimenting, and it seems that the remote machine behaves as though it gets a mouse up event shortly after it gets the mouse down event, even though I am still holding the button down. On both machines, things work fine outside of Remote Desktop. I did reinstall the OS and software on my Windows Vista machine a couple of months ago, and that might have been about the same time that this problem appeared. I don't frequently use Remote Desktop, so I can't be sure. Does anyone have any suggestions?

    Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >