Search Results

Search found 72228 results on 2890 pages for 'windows store apps'.

Page 1667/2890 | < Previous Page | 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674  | Next Page >

• Enabling Samba Shares Across Subnets

  - by John

  I was curious how I could go about setting up SAMBA so that shares could be seen and used across different subnets. We have some Linux devices that are bound to Active Directory and we would like to have them serve SAMBA shares to clients that will reside in a different subnet than what the servers reside in? Is there any way to do this without needing to setup a WINS server or use legacy NetBIOS methods since the majority of our clients are Windows 7, Windows Server 2003, Windows Server 2008, and Macintosh OS X (10.6 or newer)? EDIT Right now, only clients in the same subnet as the SAMBA server can see the shares. Clients outside of the subnet (i.e. the client subnet) cannot see or connect to the share. The error returned is: The specified network name is no longer available. It does not seem to matter if I use IP, FQDN, or NetBIOS name to try and connect to the share with. We have a common Cisco router handling the inter-subnet routing. Everything else seems to work correctly with this network setup and the device can be pinged from multiple subnets. I also do not believe it to be a firewall type of issue since the rules for this segment are rather lax.

  Read the article

• Setup of high-end web server and DB server cluster on Amazon EC2: Is this how it's done?

  - by user1086584

  Amazon is so technical, I want to confirm that my understanding is correct. We have a large 500 GB database. (OrientDB.) We will have it mirrored to one another in the same Availability Zone. We believe the database size will grow rapidly. The plan is: Get 4 large instances that are compatible types with Placement Groups (as well as ideally, Enhanced Networking) (2 for web, 2 for DB.) We use an EBS-backed instances to store our operating system. Discussion here: http://alestic.com/2012/01/ec2-ebs-boot-recommended We can set up ephemeral SSD instance storage as swap space. (But it is lost after even a reboot. I hear its hard to add ephemeral storage if booting from EBS, but possible.) For offsite backup, we will take periodic snapshots and store them on S3. Obviously we need to ensure the database is in a safe state when that snapshot happens to avoid corruption. (Any hints here, aside from shutting down the DB?) If the database gets too big, we need to create a EBS volume that's larger. We can use RAID to break the 1 TB limit: http://alestic.com/2009/06/ec2-ebs-raid Static assets on web servers will be stored on S3. Is that correct? Or am I missing something?

  Read the article

• virtualbox snapshot size

  - by intuited

  I've started using Windows 7 under VirtualBox on an Ubuntu 10.10 host. I took about 6 snapshots over the course of setting up the VM from the Windows restore image that came with the computer. My installations were more or less limited to windows updates, antivirus, and the VB Guest Additions. I uninstalled much more than I installed. The VM was running for about 24 hours total. The snapshots increased in size at a worrisome rate, even when the machine was idle: the snapshot .vdi file for the period between 11:22 PM and 9:02 AM is 6 gigs in size; during that time very little happened. The other .vdi files are between 0.5 and 3 GB, most between 1 and 2 GB. The corresponding .sav files are between 0.5 and 1 GB. The Internet connection where I was doing this is limited to 30KB/s download, which, constantly saturated, works out to less than 3 GB per 24 hour period. Is this normal? Is there something that can be done to make snapshots more practical? update On starting up the VM again, I've noticed that mscorsvw is using significant processing time. Apparently this process [precompiles .NET assemblies]. This may have been going on during the period when I was taking snapshots, which might explain some of the snapshot size increase. I would be somewhat surprised to learn that this could be responsible for over 10 GB of additional disk usage, or that it would run for roughly 24 hours. Is this possible?

  Read the article

• Remote desktop solution where the desktop sharing party contacts the computer it wants to share with

  - by Kent

  I'm in a situation where I act as a sort of techinical support to my family and less techinically experienced friends. I'm looking for a remote desktop solution where it's possible to setup a "zero-install, double click an icon"-solution where the client computer contacts me so that I may interact with their desktop. The last part is important as the people in need of my help don't know how to configure their router or even the firewall software on their own computer. They are able to click an accept button when asked if a program should be able to make outgoing connections. They have many different kinds of routers, as well as software firewalls, and I rather not deal with the problem of how to connect to them using whatever as well as the actual problem they are having. It must be: Free of charge for non-commercial use. Possible to use it in a mode where the computer wanting to share its desktop should be able to make a connection to my computer. My computer has a DNS name we can use. Compatible with both Windows XP and Windows 7. Independent of a third party server or infrastructure. Explanations of the above: I don't want to spend money on it when I help them for free. If it's free as in freedom, all the better! I guess this boils down to being callable like showdesktopto.exe opscomputer.com where opscomputer.com is my computers DNS name. If that is possible then I can create a shortcut they can use to connect to me when they need help. It's nice if it's possible to specify a password or key file which I can use to authenticate myself, but it's not required. They use the OS which their machine comes installed with. That means Windows XP or 7. I want something which will work in the long run. Using a third party service which might not be available when I need it disqualified such solutions.

  Read the article

• EC2 Configuration

  - by user123683

  I am trying to create a server structure for my EC2 account. The design I have chosen consists of 2 instances running in different availability zones, elastic load balancer, an auto-scaling group with cloudwatch monitoring configured and a security group defining rules for access to the instances. This setup is to support an online web application written in PHP. I am trying to decide what is a better policy: Store MySQL DB on a separate Instance Store MySQL DB on an attached EBS volume (from what i know auto-scaling will not replicate the attached EBS volume but will generate new instances from a chosen AMI - is this view correct?) Regards the AMI I plan to use a basic Amazon linux 64 bit AMI, and install bastille (maybe OSSEC) but I am looking to also use an encrypted file system. Are there any issues using an encrypted file system and communication between the DB and webapp i neeed to be aware of? Are there any comms issues using the encrypted filesystem on the instance housing the webapp I was going to launch a second instance or attach a second volume in the second availability zone to act as a standby for the database - I'm just looking for some suggestions about how to get the two DB's to talk - will this be a big task Regards updates for security is it best to create a recent snapshot and just relaunch and allow Amazon to install updates on launch or is the yum update mechanism a suitable alternative - is it better practice to relaunch instead of updates being installed which force a restart. I plan to create two AMI snapshots one for the app server and one for the DB each with the same security measures in place - is this a reasonable - I just figure it is a better policy than having additional applications that are unnecessary included in a AMI that I intend on using. My plan for backup is to create periodic snapshots of the webapp and DB instances (if I use an additional EBS volume instead of separate instances my understanding is that the EBS volume will persist in S3 storage in the event of an unexpected termination and I can create snapshots of the volume backup purposes). Thanks in advance for suggestions and advice. I am new to EC2 and I may have described unnecessary overkill but I want to try implement what can be considered a best practice solution so all advice is appreciated.

  Read the article

• When to use Truecrypt, and when not to?

  - by tm77

  I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

  Read the article

• Using mixed disks and OpenFiler to create RAID storage

  - by Cylindric

  I need to improve my home storage to add some resilience. I currently have four disks, as follows: D0: 500Gb (System, Boot) D1: 1Tb D2: 500Gb D3: 250Gb There's a mix of partitions on there, so it's not JBOD, but data is pretty spread out and not redundant. As this is my primary PC and I don't want to give up the entire OS to storage, my plan is to use OpenFiler in a VM to create a virtual SAN. I will also use Windows Software RAID to mirror the OS. Partitions will be created as follows: D0 P1: 100Mb: System-Reserved Boot D0 P2: 50Gb: Virtual Machine VMDKs for OS D0 P3: 350Gb: Data D1 P1: 100Mb: System-Reserved Boot D1 P2: 50Gb: Virtual Machine VMDKs for OS D1 P3: 800Gb: Data D2 P1: 450Gb: Data D3 P1: 200Gb: Data This will result in: Mirrored boot partition Mirrored Operating system Mirrored Virtual machine O/S disks Four partitions for data In the four data partitions I will create several large VMDK files, which I will "mount" into OpenFiler as block-storage devices, combined into three RAID arrays (due to the differing disk sizes) In effect, I'll end up with the following usable partitions SYSTEM 100Mb the small boot partition created by the Windows 7 installer (RAID-1) HOST 50Gb the Windows 7 partition (RAID-1) GUESTS 50Gb Virtual machine Guest VMDK's (RAID-1) VG1 900Gb Volume group consisting of a RAID-5 and two RAID-1 VG2 300Gb Volume group consisting of a single disk On VG1 I can dynamically assign storage for my media, photographs, documents, whatever, and it will be safe. On VG2 I can dynamically assign storage for my data that is not critical, and easily recoverable, as it is not safe. Are there any particular 'gotchas' when implementing a virtual OpenFiler like this? Is the recovery process for a failing disk going to be very problematic? Thanks.

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• Removing SCIM input method as default from gnome terminal

  - by Mark

  Hello - I am recently back into the Linux world after about a 10 year absence. While I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'. I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect. Can someone tell me a) what is this SCIM input method b) how can I make it so that it is not the default? I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set. I guess as a final question, can I just get rid of SCIM? Or is that tied into the window manager somehow? I do appreciate any clarifications that I can get. Thanks.

  Read the article

• Using 1920x1200 mode on SyncMaster T260HD in Linux

  - by dagorym

  I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

  Read the article

• Wireless USB keyboard and mouse can wake system, but then receiver is inactive

  - by BlueMonkMN

  I have a Microsoft brand USB device that acts as a receiver for a wireless Microsoft Keyboard and a wireless Mouse. When it's operating normally, there are LEDs on the device indicating Caps Lock, Num Lock and Function Lock, of which the latter 2 are usually lit. It is plugged into a Dell Isnpiron 531 with Windows 7 32-bit running on an AMD Athlon 64 X2 Dual Core processor 5000+. When the computer goes to sleep (the power indicator on the main box is flashing), I can wake it by moving the mouse. So far all is good. However, something changed in, I think, the past couple weeks (I suspect due to a Microsoft driver update problem). Before the change, after waking the computer, everything would operate normally as far as I could tell, but now after waking the computer, the receiver has no lights on, and the keyboard and mouse are completely unresponsive (which is odd, considering the mouse woke up the computer). There is a button on the receiver that's supposed to reset the wireless connection and flash the lights while it does so, but it has no effect in this state. It's like the receiver doesn't have power (but how would the system know I moved the mouse, unless the power was on until it woke up?). I have checked the BIOS/CMOS settings or whatever you call them, and did not see anything related to USB in the power management section. I have checked Windows 7 device manager and ensured that all the USB Root Hub devices have the setting unchecked for allowing the USB power to be turned off. Like I said, this was working before, and the only thing I can think of that's changed is applying Windows Updates.

  Read the article

• GlusterFS on VMWare ESXi 5

  - by Dharmavir

  I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

  Read the article

• Help Installing SQL Server 2008 Express Edition

  - by Jordan S

  Ok I am running Windows 7, 64 bit. I cleaned of SQL server 2005 completely off my system leaving only SQL Compact Edition. I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=01af61e6-2f63-4291-bcad-fd500f6027ff&displaylang=en and installed SQL Server 2008 Express Edition Service Pack 1. After the install, under my start bar menu all i have for SQL configuration tools are the Configuration Manager, Error and Usage Reporting and the Install Center. I don't have the SQL Managment Studio. So I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=08e52ac2-1d62-45f6-9a4a-4b76a8564a2b&displaylang=en and downloaded the SQL Server 2008 Management Studio Express but when I try to install it I get a warning says This program has known compatibility issues and that I need to Install SQL Server 2008 Service Pack 1. I thought that is what I installed. So, I tried to continue running the install but I then get an error message that says Invoke or BeginInvoke can not be called on a Form before it is opened... How can I check if Service pack 1 is installed or not? What should I do? Also I rebooted my system and checked for Windows Updates and it says that Windows it up to date.

  Read the article

• Linux group permissions getting overwritten by owner

  - by Andy

  I am not a user of Linux, but I am encountering some permissions problems with it that I hope someone can shed some light on. Bit of background: A colleague of mine has a Linux box (running Debian I believe) with an SVN repository on it. The repository directory and files 'owner' is my colleauge. We are both members of a group called 'users'. He manages several projects both Linux and Windows apps, while I have one Windows app. For the Windows apps, we both use TortoiseSVN via an SSH link to commit/update. Performing the command 'ls -l' shows the repository files and folders on the Linux box to have the following permissions: -rwxrwx--- john users However, when my colleauge commits to the repository, the permissions change to: -rwxrwx--- john john This then means I get 'Permission denied' when trying to access the repository myself as it appears that the group permissions have been overwritten with only 'owner' permissions. To fix this, a 'chown -R' command is applied to the files/folders to set the permissions back to owner/group, but each time he writes to the repository, the issue repeats. I'm not sure if this is solely an SVN problem, or a more fundamental owner/group issue. Anyone any clue on how to stop this happening, or where to go and look? I'm trying to help out my colleague who is having some trouble resolving this issue. Apologies for the vague info, I hope I have conveyed the problem clear enough. Like I say, I am not a Linux user, I have only put down what I have managed to pick up from looking over his shoulder. Thanks for any pointers I can pass on!

  Read the article

• DNS Does Not Register at Off-site Locations

  - by Russ Warren

  First of all, let me give you the specifics of our setup: Windows Small Business Server 2008 Domain w/ all applicable updates on the DC The DC does DHCP for the main site The DC does DNS for all sites 3 sites including our headquarters where the DC is located All sites are connected through OpenVPN SSL tunnels terminated by an Untangle box at each site The 2 remote sites us the Untangle box as a DHCP server for their subnet, which assigns the DC as the primary DNS server Collection of Windows XP and Windows 7 workstations connected to the domain Here's the issue: All of the workstations at the main site register with the DNS server on the domain controller fine. As they grab an IP from the DHCP server, it updates the DNS server with the new host record. I have 2 systems (each at different remote sites) that fail to register with the DNS server. I've attempted the following troubleshooting steps: Confirmed the network adapter is using the DC as a DNS server Confirmed 2-way traffic is possible between DC and workstation Verified the "Register with DNS server" setting was checked in the adapter properties Attempted ipconfig /registerdns and received no errors For the time being, I have setup a DHCP reservation for these systems and manually created a host record. This seems to work fine, but I need a solution for any new systems that go out there.

  Read the article

• How to create VHD disk image from a Linux live system?

  - by Federico

  Once more, I have to resort at the experts here at SuperUser, as my other sources (mainly Google ;-)) didn't prove very helpful... So basically, I would like to create a VHD image of a physical disk to be archived/accessed/maybe even mounted in a virtual machine. Now, there are dozens of articles and tutorials on how to do that on the web, but none that meets exactly the conditions I would like to achieve: I would like the destination file to be a VHD image, as Windows 7 can mount it natively, even over the network and many other programs can use it (VirtualBox, ...) The disk I'm trying to image contains a Windows XP install, so in theory, I could use the disk2vhd utility, but I would like to find a solution that doesn't require booting that Windows XP install (ie keep the disk read-only) Thus I was searching for a solution involving some sort of live system (running from a USB stic or the network) However, all the solutions that I've came across either make use of disk2vhd or use the dd command under linux, which does a complete copy of the disk (ie even empty blocks) and does not output a VHD file. Is there a tool/program under Linux that can directly create a VHD file? Or is is possible to convert a raw disk image created using dd to a VHD file, without allocating space for the empty blocks? How would you proceed? As always, any advice or comment is highly appreciated!!

  Read the article

• Apache, suexec, PHP, suPHP

  - by Chris_K

  While I'm quite comfortable as a Linux user, my Linux Admin-fu is a bit weak. Thus, I'm here looking for guidance with a CentOS server I'm about to build. I need to setup an Apache2 web server for a few of our clients. I want each client's web content to be under their home directory (USERDIR in apache.conf, right?) for the static HTML sites. I want Apache to run as the client (suexec?). Some of their stuff will be PHP apps and I'm under the impression I'll want to look at suphp as well then. So basically I want to look like a small version of a shared web hosting company. Considering how common those are I thought I'd easily find a nice current How-To guide on setting this all up but so far I've had very little luck. I suspect my search words are off. So the questions (feel free to answer any or all): Anyone have some solid links to current/modern guides that would help me set this all up? No, the apache documentation site is not a guide ;-) Since I have a mix of static sites and PHP apps do I want/need both suexec and suphp installed? If so, does that introduce any challenges I should be aware of? Should I be looking at other options instead of suexec and suphp? I plan to give the end users SSH, SFTP or SCP access to their stuff (if that affects anything). Thanks in advance for your help.

  Read the article

• Linux Mint 13 is not booting on dual boot computer

  - by Brian

  thanks in advance for your time. I have 2 hard drives in my computer a 300 GB drive which is my primary drive for windows 7 and a 1.5 TB drive that I'd used for storage. When I got it I partitioned 500 GB for use in Linux. So, I created a bootable USB and clicked the "Install by Current Operating System" option from Mint. It installed it to the free 500 GB like I'd hoped it would. Now, I can't get it to boot though. I've tried using EasyBCD to create the boot entry and it hangs on a black screen. Thanks. EDIT @ Ryhuk It presents a menu with two options 1) Windows and 2) Mint. This was a menu I created with easyBCD. When I select option 1 it boots to windows fine. When I select option 2 it hangs on a black screen with just a white bar flashing (Can't remember what its called, it marks the current cursor location on a text field) and won't respond to any key presses but alt ctrl del.

  Read the article

• Mac Security - Which one?

  - by Bob Rivers

  Hi, Recently I had my credit card cloned. A few hours after shopping at an online store (in which I trust and buy since 2006) I received a call from my bank asking if I recognize a $5,000 debt to a store(?!) called Church of Christ... I'm a Mac user (OS X 10.6.3). I always kept my system updated and I have firewall enabled (in my Mac and in my broadband router), but I decided to adopt some kind of protection. I don't want to rise passionate discussions. Real or not, snake oil or not, I need to have back my peace of mind... I read this and this posts. I selected two software that I think that could help me (both have more features other than just an antivirus). Does someone have feedback about Intego's VirusBarrier X6 or Trendmicro's Smart Surfing? Intego solutions seems to be better, but TrendMicro brand/name is stronger in corporate environment, so their solution should be good. Both solutions have 30 day free trial, but I would like to hear something from you. Any other solution that I should look? TIA, Bob

  Read the article

• Unable to access my IIS website using hostname. Works fine with localhost

  - by rajugaadu

  I am unable to access my IIS website or even the default website. I did a bit of research and checked/selected the option 'Integrate Windows Authentication' in the Properties > Directory Service tab. From then on I could access the website using localhost. But when I use my hostname, it asks for domain username/password. Why is it so? I don't understand why am I not able to access my website without checking this option to integrate windows authentication? My goal is to access the website using both localhost and hostname. More details on what I did: I haven't done anything out of world. What I did is: IIS - Websites - Create new Website - Create a working folder - Set a default page. I restart this website and then click on browse. And I do not see my default page. I had to go to Directory Service tab and select the check box "Integrate Windows Authentication". Then I can see the default page coming. On IE too I can see the default page coming when I use http://localhost. But when I use http://{hostname} it asks for domain username and password. Why???

  Read the article

• Why can't I unblock postgres with shorewall?

  - by ryeguy

  I can't seem to unblock the port needed for postgres using Shorewall. I am developing a PHP app on my windows machine here, and then I upload it on my linux box to actually use it. The linux box runs the php files as well as hosts the db server. Since I need it working from both machines, in my PHP code I am referring to the database as the full IP instead of localhost. I can easily connect to postgres from my windows machine, but ironically, my PHP app can't connect to postgres even though it's on the same box. Here's what I have in /etc/shorewall/rules: #macro/action src dest PostgreSQL/ACCEPT net $FW PostgreSQL/ACCEPT loc $FW PostgreSQL/ACCEPT loc dmz PostgreSQL/ACCEPT net dmz PostgreSQL/ACCEPT loc net PostgreSQL/ACCEPT dmz $FW PostgreSQL/ACCEPT dmz loc PostgreSQL/ACCEPT dmz net PostgreSQL/ACCEPT dmz dmz Clearly I have a ton of crap there. The first line is all I needed to make it allow a connection from my windows machine. All the lines after it are me just trying everything to get it to work. What am I missing?

  Read the article

• Problem adding second domain controller to SBS 2008

  - by Quango

  Have an SBS 2008 server in one location, and want to add a backup domain controller at a different site. The two sites are linked by a VPN. New server is running Server 2008 R2, fully patched. At present it is a member server and the DNS is pointing at the SBS DNS. When I try running DCPROMO to connect the server, the wizard runs fine up to the point where the wizard is 'configuring Active Directory Domain Services' and 'examining forest': "The operation failed because: The wizard could not read operational attributes from the remote Active Directory Domain Controller SERVER.DOMAIN.LOCAL using LDAP. "The specified server cannot perform the requested operation." This error can occur if you have not been granted necessary permissions to read data in the directory. For more information, please see article 936241 in the Microsoft Knowledge Base (http://go.microsoft.com/fwlink/?LinkId=88420)." I was logged on as domain administrator. Interestingly the link is invalid and the KB article does not exist..! Settings: Configure this server as an additional Active Directory domain controller for the domain "[domain]". Site: [site] Additional Options: Read-only domain controller: "No" Global catalog: Yes DNS Server: Yes Update DNS Delegation: No Source domain controller: any writable domain controller Database folder: C:\Windows\NTDS Log file folder: C:\Windows\NTDS SYSVOL folder: C:\Windows\SYSVOL The DNS Server service will be configured on this computer. This computer will be configured to use this DNS server as its preferred DNS server.

  Read the article

• Blue screen issue

  - by Jack

  I received several BSOD's that are recorded in the following logs: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 50 BCP1: FFFFF95FF8150C10 BCP2: 0000000000000008 BCP3: FFFFF95FF8150C10 BCP4: 0000000000000005 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-20030-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-33025-0.sysdata.xml ~~~~~ Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-32729-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-64319-0.sysdata.xml It seems to occur at random. I have gone 2 months without a BSOD, then I have gone a week with 10+ without changing what I am doing. This is my system: Windows 7 Professional 64-bit Gigabyte GA-890GPA-UD3H AMD Phenom II x6 1090T Processor 3.2GHz 8GB Ram(4X 2GB) Radeon HD 7850 2TB HDD Thermaltake 500W PSU I'm not sure about what the BSOD says, it just counts to 100 by 5's then restarts the computer. It happens fast and I have tried to get a picture before but to no avail.

  Read the article

• Apache logging issues

  - by Dan

  I'm trying to parse apache log files, but I'm finding some strange results and I'm not sure what they mean. Hopefully someone can provide some insight. (all of the IP addresses were altered. none actually start with 192, I didn't figure the search engines mattered though.) In the first example, multiple ip addresses are showing up in the host field: 192.249.71.25 - - [04/Aug/2009:04:21:44 -0500] "GET /publications/example.pdf HTTP/1.1" 200 2738 192.0.100.93, 192.20.31.86 - - [04/Aug/2009:04:21:22 -0500] "GET /docs/another.pdf HTTP/1.0" 206 371469 What causes this? Does it have to do with proxy servers? Is there a way to have Apache only log one? In the second example, a bunch of information is just completely missing! What would cause this? msnbot-65-55-207-50.search.msn.com - - [29/Dec/2009:15:45:16 -0600] "GET /publications/example.pdf HTTP/1.1" 200 3470073 "-" "msnbot/2.0b (+http://search.msn.com/msnbot.htm)" 266 3476792 - - - - "-" - - "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.1)" 285 594 - - - - "-" - - "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.1)" 285 4195 - - - - "-" - - "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.1)" 299 109218 crawl-17c.cuil.com - - [29/Dec/2009:15:45:46 -0600] "GET /publications/another.pdf HTTP/1.0" 200 101481 "-" "Mozilla/5.0 (Twiceler-0.9 http://www.cuil.com/twiceler/robot.html)" 253 101704 My CustomLog configuration says: LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-agent}i\" %I %O" common

  Read the article

• iis7 large worker process request queue creating process blocking aspnet.config & machine.config amended (bottleneck)

  - by scott_lotus

  ASP.net 2.0 app .net 2.0 framework IIS7 I am seeing a large queue of "requests" appear under the "worker process" option. State recorded appear to be Authenticate Request and Execute Request Handles more than anything else. I have amended aspnet.config in C:\Windows\Microsoft.NET\Framework64\v2.0.50727 (32 bit path and 64 bit path) to include: maxConcurrentRequestsPerCPU="50000" maxConcurrentThreadsPerCPU="0" requestQueueLimit="50000" I have amended machine.config in C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG (32 bit and 64 bit path) to include: autoConfig="true" maxIoThreads="100" maxWorkerThreads="100" minIoThreads="50" minWorkerThreads="50" minFreeThreads="176" minLocalRequestFreeThreads="152" Still i get the issue. The issue manifestes itself as a large number of processes in the Worker Process queue. Number of current connections to the website display 500 when this issue occurs. I dont think i have seen concurrent connections over 500 without this issue occurring. Web application slows as the request block. Refreshing the app pool resolves for a while (as expected) as the load is spread between the two pools. Application pool in question FIXED REQUEST have been set to refresh on 50000. Thank you for any help. Scott quick edit to say hmm, my develeopers are telling me the project was built with .net 3.5 framework. Looking at C:\Windows\Microsoft.NET\Framework64\v3.5 there does not appear to be a ASPNET.CONFIG or a MACHINE.CONFIG .... is there a 3.5 equivalent ? after a little searching apparenetly 3.5 uses the 2.0 framework files that 3.5 is missing. So back to the original question , where is my bottleneck ?

  Read the article

< Previous Page | 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674  | Next Page >