Search Results

Search found 100910 results on 4037 pages for 'linux server'.

Page 167/4037 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

  • How to securely enable file sharing over PPTP on Windows 2008 Server

    - by Damage
    I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

    Read the article

  • Copy files in Linux, avoid the copy if files do exist in destination

    - by user10826
    Hi, I need to copy a /home/user folder from one hardisk to another one. It has 100000 files and around 10G size. I use cp -r /origin /destination sometines I get some errors due to broken links, permissions and so on. So I fix the error, and need to start again the copy. I wonder how could I tell the command "cp", once it tries to copy again, not to copy files again if they exist in the destination folder. Thanks

    Read the article

  • high load average, high wait, dmesg raid error messages (debian nfs server)

    - by John Stumbles
    Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

    Read the article

  • Linux: how to use Jellyfish from Jack Meterbridge?

    - by klox
    dear all, i have installed Meterbridge. But,i'm just need to use Jellyfish from this package. I changed the Meterbridge properties become: /usr/bin/meterbridge -t jf alsa_pcm:playback_1 alsa_pcm:playback_2 My problem come here, i can open the Jellyfish window but i can't show the wave from input jack. How should i do? have you ever try this? some tell me to set up the Jack Audio Connection Kit, But i don't understand how to do it because i'm new for this

    Read the article

  • Server 2003 R2 doesn't allow logon after a few days of uptime

    - by Bryan
    We have a server 2003 R2 standard (which I'll refer to as SRV01) that's knocking on a bit now, but it still acts as a file, print and SQL server on our company's network. SRV01 hosts user profiles, home directories and pretty much all our business data. Note our AD is currently at 2008 R2 level. This server is due to be upgraded in the next 12 months, but I've no budget to spend on it just yet. A bit of history of this server follows: When SRV01 was first commissioned, it acted as a domain controller (with the same 2003 R2 install it has today), paired with another server that ran Server 2003 R2 SBS. A few years ago, we purchased a pair of dedicated DCs (2008 R2) and at this point we decommissioned the 2003 SBS server, and SRV01 was DCPROMOed out of the AD. Up until very recently, SRV01 used to run Exchange 2003, however we've recently purchased a dedicated server for Exchange 2010 and upgraded (following Microsoft recommended upgrade path). Exchange 2003 was recently uninstalled. - Cleanly to the best of my knowledge. Ever since Exchange was removed from SRV01, I'm finding that after a few days of uptime, when I attempt to logon, pressing CTRL-ALT-DEL just hides the Welcome to Windows Server 2003 banner, and never presents the logon dialog. All I see is a moveable mouse pointer and a blank background. It's a similar story with an admin TS session, the RDP client connects and gives me a blank background, but no logon dialog is presented. The RDP session indefinitely hangs until I give up and close it. The only way I've been able to gain access to the server is to pull the plug on it. Whilst the server does have a battery backed up RAID 5 controller, I'm unhappy about having to do this, so as a temporary measure, I've created a scheduled job to reboot SRV01 each night. Not only do I not like the idea of scheduling a reboot of a server like this, but it is also causing problems for users that leave desktop PCs left logged on overnight. Users complain of 'Delayed Write Failures', and there has also been a number of users that have started to complain about account lockout problems, as well as users not able to connect to shares on SRV01 until they reboot their desktop PCs. I've examined event logs on SRV01 and on the DCs looking for clues as to what the problem is, but there really is nothing untoward being logged. How could I being to investigate this problem when nothing of any relevance is being logged? Is there some additional logging that can be enabled that might give some clues as to what could be causing this problem? Could performance monitor help me out here, and if so, what counters would you consider monitoring? It's worth mentioning that whilst the server is unresponsive via the console and TS, it does still respond to clients connecting to shares without problems for several days, but after about a week I then start to hear users reporting problems accessing shares, but this seems quite sporadic. I've also tried leaving the console logged on (and locked), when I notice I can no longer logon via TS, I can unlock the server console without problem, but it refuses to reboot/shutdown, and subsequent attempts to reboot report that a system shutdown is already in progress and the system then completely hangs. I've tried playing the waiting game for several hours thinking that a timeout might allow the shutdown to continue, but to no avail.

    Read the article

  • How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

    - by sauparna
    I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

    Read the article

  • Embed album art in OGG through command line in linux

    - by teratomata
    I want to convert my music from flac to ogg, and currently oggenc does that perfectly except for album art. Metaflac can output album art, however there seems to be no command line tool to embed album art into ogg. MP3Tag and EasyTag are able to do it, and there is a specification for it here which calls for the image to be base64 encoded. However so far I have been unsuccessful in being able to take an image file, converting it to base64 and embedding it into an ogg file. If I take a base64 encoded image from an ogg file that already has the image embedded, I can easily embed it into another image using vorbiscomment: vorbiscomment -l withimage.ogg > textfile vorbiscomment -c textfile noimage.ogg My problem is taking something like a jpeg and converting it to base64. Currently I have: base64 --wrap=0 ./image.jpg Which gives me the image file converted to base64, using vorbiscomment and following the tagging rules, I can embed that into an ogg file like so: echo "METADATA_BLOCK_PICTURE=$(base64 --wrap=0 ./image.jpg)" > ./folder.txt vorbiscomment -c textfile noimage.ogg However this gives me an ogg whose image does not work properly. I noticed when comparing the base64 strings that all properly embedding pictures have a header line but all the base64 strings I generate are lacking this header. Further analysis of the header: od -c header.txt 0000000 \0 \0 \0 003 \0 \0 \0 \n i m a g e / j p 0000020 e g \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000040 \0 \0 \0 \0 \0 \0 \0 \0 035 332 0000052 Which follows the spec given above. Notice 003 corresponds to front cover and image/jpeg is the mime type. So finally, my question is, how can I base64 encode a file and generate this header along with it for embedding into an ogg file?

    Read the article

  • I2C_SLAVE ioctl in i2c linux driver

    - by zac
    I am supposed to write a simple write and read program for i2c but the problem is that i dont have the device at hand presently to test it so i need my code to be perfect. I am confused about the function of the I2C_SLAVE ioctl.From what i read,this ioctl is used to set the slave address. But we pass the slave address again when performing read/write using ioctl I2C_RDWR via addr in the structure i2c_msg. So then,what is the function of I2C_SLAVE command?Do i need to call it every time i perform a read or write operation? Thank you in advance.

    Read the article

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Assigning multiple IPv6 addresses on a Server

    - by andrewk
    Let me uncover my intent. My host provides hundreds of IPV6 addresses free, but charge for an IPV4 address. I have several sites under one server and I was wondering if I can give each site/domain it's own ipv6 address. Is that even possible? If so how? I've read quite a bit about ipv6 but I do not understand it as clear as I'd like. My main goal is, for each domain/site to have it's own unique IP, so someone can't do a reverse ip look up and see what sites I have on that server. Thanks in advance for the patience.

    Read the article

  • Checking detailed memory information on Linux

    - by user35153
    I know that I can check CPU info via cat /proc/cpuinfo and memory info via cat /proc/meminfo. But cat /proc/meminfo yields results like the following: MemTotal: 66098352 kB MemFree: 329152 kB Buffers: 632432 kB Cached: 62619692 kB SwapCached: 0 kB Active: 6425444 kB Inactive: 58717276 kB SwapTotal: 1951888 kB SwapFree: 1951796 kB Dirty: 38416 kB Writeback: 0 kB AnonPages: 1890268 kB Mapped: 12624 kB Slab: 464580 kB SReclaimable: 275812 kB SUnreclaim: 188768 kB PageTables: 7524 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 35001064 kB Committed_AS: 3860248 kB VmallocTotal: 34359738367 kB VmallocUsed: 125636 kB VmallocChunk: 34359612527 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB I want to learn more about the clock speed of the memory (in Mhz?). How do I get that information?

    Read the article

  • How to use qcow2 disk image in Linux?

    - by sauparna
    I have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows: modprobe nbd max_part=63 qemu-nbd -c /dev/nbd0 /host/disk100G.img mount /dev/nbd0p1 /home/rup/disk But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again: qemu-nbd -d /dev/nbd0 umount joborkhaki/ What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?

    Read the article

  • Ripping a home video VCD on Linux or Windows with VLC or otherwise

    - by user259774
    I have a VCD with 22 minutes of video on it. I would like to retain this footage and throw away the VCD. I can play the whole thing with VLC ("open disc - vcd - /dev/sr0 - play"): all 22 minutes of the main track. I don't believe there's any other content aside from the main track. I can seek to anywhere I want to within the 22 minute track. If I mount /dev/sr0 /media/vcd and then try to copy the only file from the MPEGAV folder, I get an I/O error, with an empty destination file. VLC has a "convert" option in addition to "play". When I use this I actually get a good OGG file back, after it runs through the video in painful real-time. I guess it dubs it frame-by-frame. But the file is only 10 minutes long, leaving 12 minutes off of the track. Handbrake doesn't detect it's track titles, unfortunately. I don't know if I should start getting involved with GNU ddrescue or if it's because VCDs somehow encode their data sectors differently. Anyway, I'm in way over my head and if anyone knows how I could get that video track off the thing, feel free to share! Edit: I should note that I also have access to a Windows computer

    Read the article

  • DNS server not functioning correctly

    - by Shamit Shrestha
    I have setup a DNS server which isnt working properly. My domain is accswift.com which has glued to two name servers ns1.accswift.com and ns2.accswift.com for the same IP address - 203.78.164.18. On domain end everything should be fine. Please check -http://www.intodns.com/accswift.com I am sure its the problem with the linux server. Can anyone help me find where the problem is for me? Below is the settings that I have in the server. ====================== DIG [root@accswift ~]# dig accswift.com ; << DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 << accswift.com ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 11275 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;accswift.com. IN A ;; ANSWER SECTION: accswift.com. 38400 IN A 203.78.164.18 ;; AUTHORITY SECTION: accswift.com. 38400 IN NS ns1.accswift.com. accswift.com. 38400 IN NS ns2.accswift.com. ;; ADDITIONAL SECTION: ns1.accswift.com. 38400 IN A 203.78.164.18 ns2.accswift.com. 38400 IN A 203.78.164.18 ;; Query time: 1 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Wed Nov 6 20:12:16 2013 ;; MSG SIZE rcvd: 114 ============== IP Tables settings vi /etc/sysconfig/iptables *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A FORWARD -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A OUTPUT -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A INPUT -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT COMMIT Completed on Fri Sep 20 04:20:33 2013 Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT Completed Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT ====DNS settings vi /var/named/accswift.com.host $ttl 38400 @ IN SOA ns1.accswift.com. root.ns1.accswift.com. ( 1382936091 10800 3600 604800 38400 ) @ IN NS ns1.accswift.com. @ IN NS ns2.accswift.com. accswift.com. IN A 203.78.164.18 accswift.com. IN NS ns1.accswift.com. www.accswift.com. IN A 203.78.164.18 ftp.accswift.com. IN A 203.78.164.18 m.accswift.com. IN A 203.78.164.18 ns1 IN A 203.78.164.18 ns2 IN A 203.78.164.18 localhost.accswift.com. IN A 127.0.0.1 webmail.accswift.com. IN A 203.78.164.18 admin.accswift.com. IN A 203.78.164.18 mail.accswift.com. IN A 203.78.164.18 accswift.com. IN MX 5 mail.accswift.com. ====Named.conf vi /etc/named.conf options { listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { any; }; recursion yes; allow-recursion { localhost; 192.168.2.0/24; }; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; forward first; forwarders {192.168.1.1;}; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; zone "accswift.com" { type master; file "/var/named/accswift.com.hosts"; allow-transfer { 127.0.0.1; localnets; 208.73.211.69; }; }; zone "ns1.accswift.com" { type master; file "/var/named/ns1.accswift.com.hosts"; }; ==================================== Can anybody find any flaw in this? I am still unable to reach accswift.com from any other ISP. But it is browsable from the same network though. Thanks in advance.

    Read the article

  • Using terminal vs KDE in linux?

    - by Ke
    Hi Im used to using nautilus within centos but have recently just got a VPS and quickly realising that using a KDE is unacceptable in this environment. Although I do find it so much quicker doing things like folder permissions in KDE rather than typing it all out in the terminal? Everyone I speak to says, use the terminal and I should learn this way as opposed to using the KDE, but theres certain things I just dont get How is it possible to make quick changes to scripts and viewing them in a browser etc , without a mouse or using KDE? and only using a terminal?? I am wondering how to develop websites just using the terminal??? How can it be quicker to type out/view permissions etc in the terminal when its instant and just a few clicks in the KDE? Any thoughts are much appreciated. I would love to understand the benefits but just cant seem to see them right now. Cheers Ke.

    Read the article

  • Virtual dedicated server repetitive draining RAM, OOM constantly

    - by Deerly
    My linux (fedora red hat 7) virtual dedicated server has been experiencing OOM multiple times a day for the past several days. I thought the issue was with spamd/spamassassin but after disabling this the errors remains. The highest usage displayed on ps faux --cumulative: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 28412 8.7 0.5 309572 109308 ? Sl 22:15 0:17 /usr/java/jdk1. mysql 7716 0.0 0.0 136256 18000 ? Sl 22:12 0:00 _ /usr/libexe named 17697 0.0 0.0 120904 15316 ? Ssl 22:09 0:00 /usr/sbin/named I'm not running any java applications so I'm not sure why the top issue is showing up. It is frustrating as I barely have anything running on the server and use the tiniest fraction of bandwidth. Any help or suggestions on zeroing in on the source of the drain would be much appreciated! Thanks!

    Read the article

  • Sync files between 2 remote computers using Linux terminal

    - by Eddy
    I want to be able to synchronise files between 2 remote computers in both directions. Say for example that I want to synchronise my /home/Documents directory with <username>@example.com:/home/Documents What's the easiest way to update the folders in both directions, so that new/updated files on my home computer get transferred to the remote computer, and new/updated files on the remote computer get transferred to my home computer?

    Read the article

  • Linux file association

    - by Mgccl
    With a desktop environment, there are file associations that goes with it. I'm a minimalistic user, who doesn't use any of such, but still want some kind of file associations to ease my burden. So I'm searching for a program that does something like the following. open file.pdf this will look at the extension, and translate to okular file.pdf. Of course one can always write a bash script to do this. I wonder if there is something existing, so I don't reinvent the wheel.

    Read the article

  • High server load - [jbd2/md1-8] using 99.99% IO

    - by Alex
    I've been having spike in load over the last week. This usually occurs once or twice a day. I've managed to identify from iotop that [jbd2/md1-8] is using 99.99 % IO. During the high load times there is no high traffic to the server. Server specs are: AMD Opteron 8 core 16 GB RAM 2x2.000 GB 7.200 RPM HDD Software Raid 1 Cloudlinux + Cpanel Mysql is properly tuned Apart from the spikes, the load usually is around 0.80 at most. I've searched around but can't find what [jbd2/md1-8] does exactly. Has anyone had this problem or does anyone know a possible solution? Thank you. UPDATE: TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 16:05:36 399 be/3 root 0.00 B/s 38.76 K/s 0.00 % 99.99 % [jbd2/md1-8]

    Read the article

  • Skype can not find libssl.so.10 on 64-bit Fedora Linux

    - by itpastorn
    Skype will not start: $ skype & skype: error while loading shared libraries: libssl.so.10: wrong ELF class: ELFCLASS64 $ ldd /usr/bin/skype |grep ssl libssl.so.10 => not found OK, missing libssl. Where is it? $ ls -l /usr/lib/libssl.so* lrwxrwxrwx. 1 root root ... /usr/lib/libsssl.so -> libcrypto.so.1.0.1e lrwxrwxrwx. 1 root root ... /usr/lib/libssl.so.10 -> libssl.so.6 -rwxr-xr-x. 1 root root ... /usr/lib/libssl.so.1.0.1e lrwxrwxrwx. 1 root root ... /usr/lib/libssl.so.6 -> /usr/lib64/libssl.so.10 OK, it points to libssl.so.6 which in turns points to the 64-bit version. $ ls -l /usr/lib64/libssl.so* lrwxrwxrwx. 1 root root ... /usr/lib64/libssl.so.10 -> libssl.so.1.0.1e -rwxr-xr-x. 1 root root ... /usr/lib64/libssl.so.1.0.1e lrwxrwxrwx. 1 root root ... /usr/lib64/libssl.so.6 -> /usr/lib64/libssl.so.10 So, why is my linkchain not picked up by Skype? (Identical problem exists with libcrypto, BTW).

    Read the article

  • Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

    - by Richard Maynard
    We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

    Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >