Search Results

Search found 74849 results on 2994 pages for 'file folder'.

Page 1672/2994 | < Previous Page | 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679  | Next Page >

  • Install Ubuntu 10.10 from loopback mounted ISO image

    - by Zifre
    I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

    Read the article

  • Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

    - by James
    First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

    Read the article

  • Why won't Google Chrome install on my Windows 7?

    - by quakkels
    I can tell something is wrong with my computer. A little history: Google Chrome was not running correctly. When i was using facebook, any link on face that ran an ajax javascript function would not work. No error was being thrown, it just wasn't working. I uninstalled Chrome and reinstalled it. On re-install, a toolbar automatically installed with Chrome. BitTorrentBar. I did not install BitTorrentBar, it installed on it's own. Bad. When BitTorrentBar was active, then ajax functions on facebook worked. When I deactivated or uninstalled BittorrentBar from Chrome extensions, then ajax stopped working. I ran scanned the computer with Avast (free version) and SpyBot Search and Destroy (also free). They found nothing wrong. I uninstalled Chrome using Control Panel and then I went through my file system deleting anything that had "google", "BitTorrent", "chrome", or "conduit". Conduit seems to distribute BitTorrentBar. After doing all that, I tried to reinstall Chrome. I got this error: System.ComponentModel.Win32Exception: The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at System.Diagnostics.Process.Start(ProcessStartInfo startInfo) at ClickOnceBootStrap.ClickOnceEntry.Main() This error interupts the Chrome install every time! computer scans don't show anything wrong. So then, I thought this might be a .net framework error. Perhaps I deleted something I wasn't supposed to. So I reinstalled .NET Framework 4 and checked the repair option. I also ran Windows Updates. When I tried to download Chrome, again I got the same error as listed above. What should I do?

    Read the article

  • Vagrant up doesn't load chef configs and doesn't keep an error log

    - by la_f0ka
    I'm trying to set up a vagrant box and I'm running with all sort of troubles. Right now I'm getting a strange error message where it states there's a stack trace file with more info, but that file is no where to be found. This is the error: stdin: is not a tty [Sun, 16 Sep 2012 18:31:47 +0000] INFO: *** Chef 0.10.0 *** [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Setting the run_list to ["recipe[apt]", "recipe[openssl]", "recipe[apache2]", "recipe[mysql]", "recipe[mysql::server]", "recipe[php]", "recipe[php::module_apc]", "recipe[php::module_curl]", "recipe[php::module_mysql]", "recipe[apache2::mod_php5]", "recipe[apache2::mod_rewrite]"] from JSON [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List is [recipe[apt], recipe[openssl], recipe[apache2], recipe[mysql], recipe[mysql::server], recipe[php], recipe[php::module_apc], recipe[php::module_curl], recipe[php::module_mysql], recipe[apache2::mod_php5], recipe[apache2::mod_rewrite]] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List expands to [apt, openssl, apache2, mysql, mysql::server, php, php::module_apc, php::module_curl, php::module_mysql, apache2::mod_php5, apache2::mod_rewrite] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Starting Chef Run for natty.talifun.com [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Running exception handlers [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Exception handlers complete [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: Stacktrace dumped to /tmp/vagrant-chef-1/chef-stacktrace.out [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: NameError: wrong constant name Chef-symfony2Console Chef never successfully completed! Any errors should be visible in the output above. Please fix your recipes so that they properly complete. And this is what my vagrantfile looks like: Vagrant::Config.run do |config| config.vm.box = "ubuntu-1104-server-i386" config.vm.network :hostonly, "33.33.33.33" config.vm.forward_port 80, 8000 config.vm.share_folder "symfony.tests", "/var/www/symfony.tests", "data", :nfs => true config.vm.provision :chef_solo do |chef| chef.cookbooks_path = ["../my-recipes/cookbooks", "site-cookbooks"] chef.add_recipe "apt" chef.add_recipe "openssl" chef.add_recipe "apache2" chef.add_recipe "mysql" chef.add_recipe "mysql::server" chef.add_recipe "php" chef.add_recipe "php::module_apc" chef.add_recipe "php::module_curl" chef.add_recipe "php::module_mysql" chef.add_recipe "apache2::mod_php5" chef.add_recipe "apache2::mod_rewrite" chef.add_recipe "Symfony" chef.json = { :mysql => { :server_root_password => 'root', :bind_address => '127.0.0.1' } } end end

    Read the article

  • Powershell: Execute exe on remote server and capture output

    - by user364825
    I am trying to script the execution of an installer on remote web servers. The installer in question is also a Windows Service that hosts NServiceBus. If RDP'd into the server, the application is installed by the following command: &"$theInstaller" /install /serviceName:TheServiceName The installer prints output about its progress registering the service and connecting to the database to stdout, among other things. This works fine from an RDP session, but when I execute it remotely via PS, I get a you-can't-do-this-over-the-network message if I execute it directly or via Invoke-Command -computername $theRemoteServer: System.IO.FileLoadException: Could not load file or assembly 'file://\\theRemoteServer\c$ \thePath\AutoMapper.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) --- System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. (Note: I added an additional "\" to the path in the first line in order to get it to show up correctly in the preview on this site.) This, and other DLLs, are loaded by the service, and the service's execution context cannot, apparently, be remotified. I have also tried using Invoke-WmiMethod, which does something, but it's not clear what, and the output from the installer is lost: Invoke-WMIMethod win32_process create '"$theInstaller" /install /serviceName:TheServiceName' -ComputerName $server (with and without cmd.exe /k before the intaller reference): __GENUS : 2 __CLASS : __PARAMETERS __SUPERCLASS : __DYNASTY : __PARAMETERS __RELPATH : __PROPERTY_COUNT : 2 __DERIVATION : {} __SERVER : __NAMESPACE : __PATH : ProcessId : ReturnValue : 9 How does one remotely execute such an EXE and capture the output? Thanks!

    Read the article

  • update all the servers through one virtual servers using Storage are network virtual machine

    - by Mr.Calm
    Using UBUNTU and Virtal Box by Oracle, and Using this script to start nginx in Virtual Box, and placing it in Virtual box inside~/init.d #!/bin/bash ### BEGIN INIT INFO # Provides: Testinit # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO # RETVAL=0; start() { CurrentTime=$(date +%d/%m/%Y"-"%I:%M:%S) ./usr/local/nginx/sbin/nginx echo "Current Time:"$CurrentTime>>/home/server/Desktop/NginxLogs.txt echo "!Starting nginx!" >>/home/server/Desktop/NginxLogs.txt Like this i want to write auto script (setup.sh file) and place that script in all virtual boxes inside my system, for example 8 virtual boxes and in all Virtual boxes NGINX is installed. Now, The thing is i am facing problem when i want change something in setup.sh i have to go to each and every virtual box, or Communicate each Virtual machine through SSH from my main machine. i am thinking to write another script (ex: Update.sh),and inside that script we give one path of file which is saved and recently edited in main machine (ex: DummySetup.sh). as soon as i run that script all the setup.sh files which are saved in each virtual machines should update the change or replace contents with DummySetup.sh's contents. Hope this is possible thing. Help would be appreciated.Thanking you

    Read the article

  • Get details / solve issue with a kernel panic?

    - by Joseph
    I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

    Read the article

  • vsftp login errors 530 login incorrect

    - by mcktimo
    Using Ubuntu 10.04 on an aws ec2 instance. I was happy just using ssh but then a wordpress plugin needs ftp access...I just need ftp access for one site www.sitebuilt.net which is in /home/sitebuil. I installed a vftpd and pam and followed suggestions that got me to the following state /etc/vftpd.conf listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES xferlog_file=/var/log/vsftpd.log secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd rsa_cert_file=/etc/ssl/private/vsftpd.pem guest_enable=YES user_sub_token=$USER local_root=/home/$USER chroot_local_user=YES hide_ids=YES check_shell=NO userlist_file=/etc/vsftpd_users /etc/pam.d/vsftpd # Standard behaviour for ftpd(8). auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed # Note: vsftpd handles anonymous logins on its own. Do not enable pam_ftp.so. # Standard pam includes @include common-account @include common-session @include common-auth auth required pam_shells.so # Customized login using htpasswd file auth required pam_pwdfile.so pwdfile /etc/vsftpd/passwd account required pam_permit.so session optional pam_keyinit.so force revoke auth include system-auth account include system-auth session include system-auth session required pam_loginuid.so /etc/vsftpd_users sitebuil tim /etc/passwd ... sitebuil:x:1002:100:sitebuilt systems:/home/sitebuil:/bin/sh ftp:x:108:113:ftp daemon,,,:/srv/ftp:/sbin/nologin /etc/vsftpd/passwd sitebuil:Kzencryptedpwd /var/log/vftpd.log Wed Feb 29 15:15:48 2012 [pid 20084] CONNECT: Client "98.217.196.12" Wed Feb 29 15:16:02 2012 [pid 20083] [sitebuil] FAIL LOGIN: Client "98.217.196.12" Wed Feb 29 16:12:33 2012 [pid 20652] CONNECT: Client "98.217.196.12" Wed Feb 29 16:12:45 2012 [pid 20651] [sitebuil] FAIL LOGIN: Client "98.217.196.12"

    Read the article

  • Fedora, ssh and sudo

    - by Ricky Robinson
    I have to run a script remotely on several Fedora machines through ssh. Since the script requires root priviliges, I do: $ ssh me@remost_host "sudo touch test_sudo" #just a simple example sudo: no tty present and no askpass program specified The remote machines are configured in such a way that the password for sudo is never asked for. For the above error, the most common fix is to allocate a pseudo-terminal with the -t option in ssh: $ ssh -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Let's try to force this allocation with -t -t: $ ssh -t -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Nope, it doesn't work. In /etc/sudoers of course I have this line: #Defaults requiretty ... but I can't manually change it on tens of remote machines. Am I missing something here? Is there an easy fix? EDIT: Here is the sudoers file of a host where ssh me@host "sudo stat ." works. Here is the sudoers file of a host where it doesn't work. EDIT 2: Running tty on a host where it works: $ ssh me@host_ok tty not a tty $ ssh -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. $ ssh -t -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. Now on a host where it doesn't work: $ ssh me@host_ko tty not a tty $ ssh -t me@host_ko tty not a tty Connection to host_ko closed. $ ssh -t -t me@host_ko tty not a tty Connection to host_ko closed.

    Read the article

  • Port forwarding for samba

    - by EternallyGreen
    Alright, here's the setup: Internet - Modem - WRT54G - hubs - winxp workstations & linux smb server. Its basically a home-style distributed internet connection setup, except its at a school. What I want is remote, offsite smb access. I figured I'd need to find out which ports need forwarding and then forward them to the server on the router. I'm told in another question on SF that multiple ports will need forwarding, and it gets somewhat complicated. One of the things I need to know is which ports require forwarding for this, and what complications or vulnerabilities could arise from this. Any additional information you think I should have before doing this would be great. I'm told SMB doesn't support encryption, which is fine. Given I set up authentication/access control, all this means is that once one of my users authenticates and starts downloading data, the unencrypted traffic could be intercepted and read by a MITM, correct? Given that that's the only problem arising from lack of encryption, this is of no concern to me. I suppose that it could also mean a MITM injecting false data into the data stream, eg: user requests file A, MITM intercepts and replaces the contents of file A with some false data. This isn't really an issue either, because my users would know that something was wrong, and its not likely anyone would have incentive to do this anyway. Another thing I've been informed of is Microsoft's poor implementation of SMB, and its crap track record for security. Does this apply if only the client-end is MS? My server is linux.

    Read the article

  • AjaxControlToolkit JavaScript is not pointing correctly on IIS7 running behind Apache mod_proxy

    - by sohum
    So here's my setup. I've got a DynDNS account since I have a dynamic IP. I have Apache listening on port 80 and IIS7 on port 8080. I don't want users to have to enter in mydyndns.dyndns.com:8080 to get to IIS7, so I've added the following code to my Apache httpd.conf file to enable a proxy/reverse proxy: <VirtualHost *:80> ProxyPass / http://localhost:8080/myASPSite/ ProxyPassReverse / http://localhost:8080/myASPSite/ ServerName myaspsite.mydomain.com </VirtualHost> I've got a CNAME record set up on my DNS so that myaspsite.mydomain.com redirects to mydyndns.dyndns.com. When I type in myaspsite.mydomain.com into my browser, everything works beautifully... mostly. IIS7 serves up the ASPX pages and visitors to the site don't know any better. A problem arises, however, when I add Ajax Control Toolkit controls into my ASPX website, because these generate JavaScript and apparently mod_proxy_html isn't geared to handle the JS URIs properly. Sure enough, when I open up the source of my ASPX page, it has script elements as follows: <script src="/myASPSite/WebResource.axd?xyz" type="text/javascript"></script> <script src="/myASPSite/ScriptResource.axd?xyz" type="text/javascript"></script> Sure enough, these scripts are attempting to be resolved at http://myaspsite.mydomain.com/myASPSite/WebResource..., which through the proxy translates to localhost:8080/myASPSite/myASPSite/.... How can I solve this problem. The couple of websites I found suggested turning on ProxyHTMLExtended but when I tried doing that, the server did not start. I'm guessing I didn't know how to do it properly. Anyone has a handy couple of config lines that I can add to my Apache conf file to get this working as I need? I'm using Apache 2.2.11. Thanks!

    Read the article

  • Setting up AJP with JBoss 7

    - by purlogic
    I have two different versions of JBoss on a server, JBoss 6.0 Final and JBoss 7.0.2. I can one run or the other by switching a couple of sym links and issuing a "service jboss start" command. I am, by no means, an expert in JBoss, however JBoss 6.0 appears to have AJP running out of the box with no initial configuration required on port 8009. With JBoss 7, however, I had to vi the file "standalone/configuration/standalone.xml" and add a few entries. Those entries are: In the <subsystem /> tag, I added: <connector name="ajp" protocol="AJP/1.3" socket-binding="ajp" /> In the <socket-binding-group /> tag I added: <socket-binding name="ajp" port="8009"/> Then in Apache's configuration file (httpd.conf), I added: <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> ProxyPass /app ajp://localhost:8009/app ProxyPassReverse /app ajp://localhost:8009/app AJP proxying works with 6, not with 7... I assume it's because I haven't properly set up AJP in JBoss 7 and not entirely sure how to do that. I have searched documentation on their site with not a lot of specifics on how to do so. Any help or insight into setting up AJP with JBoss 7 would be much appreciated!!

    Read the article

  • How to use a Macro command button in mac excel 2011

    - by user21255
    Im using Mac excel 2011 and I can't seem to get Macro to work. What I am trying to do is that in Worksheet (1st) I am trying to get all of the data entered in the Cases Table at the bottom to all be automatically inserted into the table in the "Cases" worksheet when I click on the "Update" button. But instead I keep getting a pop up saying runtime error and then it asks if I want to End, debug or something else. I just don't know if it is because I am not using Mac Excel correctly as I am used to using windows because I believe my code is correct in the VBA editor to get the button working. Anone who is able to use Mac excel 11 can they check to see if they can use the file provided to see i the button works? If anyone has windows excel then please feel free to check to see if it works on there as well. If it is a coding problem then can you please let me know. My question is simply how to run and stop a Macro in Mac excel 2011. The file can be accessed below: http://ge.tt/76qNwIx/v/0 Thanks

    Read the article

  • Apache2 on Raspbian: Multiviews is enabled but not working [closed]

    - by Christian L
    I recently moved webserver, from a ubuntuserver set up by my brother (I have sudo) to a rasbianserver set up by my self. On the other server multiviews worked out of the box, but on the raspbian it does not seem to work althoug it seems to be enabled out of the box there as well. What I am trying to do is to get it to find my.doma.in/mobile.php when I enter my.doma.in/mobile in the adress field. I am using the same available-site-file as I did before, the file looks as this: <VirtualHost *:80> ServerName my.doma.in ServerAdmin [email protected] DocumentRoot /home/christian/www/do <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/christian/www/do> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> From what I have read various places while googling this issue I found that the negotiation module had to be enabled so I tried to enable it. sudo a2enmod negotiation Giving me this result Module negotiation already enabled I have read through the /etc/apache2/apache2.conf and I did not find anything in particular that seemed to be helping me there, but please do ask if you think I should post it. Any ideas on how to solve this through getting Multiviews to work?

    Read the article

  • where is memory gone (no, not buffers or cache)

    - by Marki
    can anyone tell me where the memory is gone: (no, this time neither buffers nor cache) # free total used free shared buffers cached Mem: 3928200 3868560 59640 0 2888 92924 -/+ buffers/cache: 3772748 155452 Swap: 4192956 226352 3966604 top, sorted by memory, descending: top - 13:42:06 up 1 day, 3:47, 2 users, load average: 0.08, 0.12, 0.36 Tasks: 228 total, 1 running, 227 sleeping, 0 stopped, 0 zombie Cpu0 : 2.0%us, 4.0%sy, 0.0%ni, 90.1%id, 0.0%wa, 0.0%hi, 4.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni, 0.0%id,100.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3928200k total, 3868020k used, 60180k free, 2896k buffers Swap: 4192956k total, 226048k used, 3966908k free, 82068k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3863 root 20 0 902m 199m 3296 S 7 5.2 99:08.77 ndsd 21906 root 20 0 138m 9076 2988 S 0 0.2 0:00.02 sfcbd 2332 root 20 0 126m 4660 1332 S 0 0.1 0:17.72 mono 4243 wwwrun 20 0 683m 4468 668 S 0 0.1 0:07.38 java 2994 root 20 0 202m 2288 1660 S 0 0.1 6:10.02 httpstkd 4338 root 20 0 184m 2240 1112 S 0 0.1 0:00.52 namcd 21898 root 20 0 32368 1832 1256 R 1 0.0 0:00.08 top In fact, some time ago oom kicked in and crashed the system (kernel panic), and I'm afraid we're again not far from that point.... UPDATE # cat /proc/meminfo MemTotal: 3928200 kB MemFree: 51336 kB Buffers: 2964 kB Cached: 72876 kB SwapCached: 29128 kB Active: 233440 kB Inactive: 88040 kB Active(anon): 188920 kB Inactive(anon): 56752 kB Active(file): 44520 kB Inactive(file): 31288 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 4192956 kB SwapFree: 3966824 kB Dirty: 32 kB Writeback: 0 kB AnonPages: 225112 kB Mapped: 11356 kB Shmem: 32 kB Slab: 1624080 kB SReclaimable: 13740 kB SUnreclaim: 1610340 kB KernelStack: 4176 kB PageTables: 10500 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 6157056 kB Committed_AS: 2397684 kB VmallocTotal: 34359738367 kB VmallocUsed: 441372 kB VmallocChunk: 34359246755 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 10240 kB DirectMap2M: 4184064 kB slabtop Active / Total Objects (% used) : 9041019 / 9207548 (98.2%) Active / Total Slabs (% used) : 401132 / 401156 (100.0%) Active / Total Caches (% used) : 91 / 159 (57.2%) Active / Total Size (% used) : 1491537.88K / 1519791.56K (98.1%) Minimum / Average / Maximum Object : 0.02K / 0.17K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 4240470 4240319 99% 0.12K 141349 30 565396K pid 2245140 2219675 98% 0.25K 149676 15 598704K size-256 2238090 2210087 98% 0.12K 74603 30 298412K size-128 ...

    Read the article

  • Apache doesn't immediately notice a change in the document root

    - by Tom
    We use capistrano for website deployments and our Apache document root is a symlink to a particular code release. The deployment procedure switches the symlink from the old release to the new release as the final step of the deployment. We are migrating our webservers from real servers running RHEL 5.6 to Amazon EC2 virtual machines running Ubuntu 11.10 and the new servers are suffering from a problem where Apache doesn't immediately notice the change to it's document root when the symlink is switched. It can take a second or so (and I think I've even seen it take a couple of minutes). It's kind of like Apache has cached the physical path of the symlink for some time. Does anyone know some Apache settings I could look at to get it to "scan" for changes to it's served files quicker. Thoughts: I read that the disks on virtual machines are much slower (since they are network attached storage). Perhaps the filesystem cache somehow works differently too? If so, is there anything that can be done? The website runs PHP code. Perhaps there is some PHP config differences between RHEL and Ubuntu? I checked realpath_cache_ttl but both servers have it commented out: e.g. ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://www.php.net/manual/en/ini.core.php#ini.realpath-cache-ttl ;realpath_cache_ttl = 120 We do use the APC opcode cache but don't think it's the issue due to experimentation. The PHP code is in different file paths for each deployment and we ensure stat=1. Here is a similar question that is very interesting: 294107 - but doesn't provide an answer for me. One solution would be to reload Apache everytime we modify the document root symlink. I'll do this if we can't find another solution.

    Read the article

  • mysql mass insert data

    - by user12145
    Edit: I realized that if I construct a large query in memory, the speed has increased almost 10 times of magnitude "insert ignore into xxx(col1, col2) values('a',1), values('b',1), values('c',1)..." Edit: since I have an index on the first column, the insert time creeps up as I insert more. Can I delay the index until the end? Original: I'm using the following to batch insert 10 million rows into mysql db(not all at once, since they don't all fit into memory), it's too slow(taking many hours). should I use load file to improve performance? I would have to create a second file to store all the 10 million rows, then load that into db. are there better ways? PreparedStatement st=con.prepareStatement("insert ignore into xxx (col1, col2) "+ " values (?, 1)"); Iterator d=data.iterator(); while(d.hasNext()){ st.clearParameters(); st.setString(1, (d.next()).toLowerCase()); st.addBatch(); } int[]updateCounts=st.executeBatch();

    Read the article

  • Why would I be getting IXFR and AXFR transfer denied on my DNS server?

    - by danielj
    From everything I've researched and tried, it appears that my named.conf is configured correctly, including the allow-transfer section. Here is a sample of the errors. It is only happening with a couple of my secondary servers, but it is happening for every zone for those servers that are failing. One of the servers is attempting IXFR, the other AXFR. The result is the same: 18-Mar-2011 14:27:51.372 security: error: client 84.234.24.90#59208: zone transfer 'juansgaranton.com/IXFR/IN' denied 18-Mar-2011 14:32:18.015 security: error: client 174.37.196.55#50783: zone transfer 'cheshirecat.net/AXFR/IN' denied Here is the relevant part of named.conf. options { directory "/etc/bind"; pid-file "/var/run/named/named.pid"; files 4096; allow-transfer { 140.186.190.103; 84.234.24.90; 207.246.95.34; 203.20.52.5; 140.186.190.103; 127.0.0.1; 174.37.196.55; }; }; logging { channel "bind" { file "/var/log/bind.log" versions 3; print-time yes; print-severity yes; print-category yes; severity info; }; category lame-servers { null; }; category "default" { "bind"; }; };

    Read the article

  • Sort order in Windows Explorer

    - by Haim H.
    The behaviour described below occurs on Windows-7 systems and on Windows XP. We operate in a dual-language environment - English and Hebrew. When in Windows Explorer we sort files by name, the order in which they are listed is not what we would expect. Here is a list of file names as sorted by Windows Explorer (all of the files have a .pdf suffix): 1G110033H-PP 19C050G-PP-ORB 19C050H-PPRM 19C100H-PPRM 19C-MBPS-PP 19C-MBPS-PP-1 29AAC050-PP 29AAC100-PP 29AAC100-PPUL 29B004064-PP 101AC050-PP 101AC100-PP 101B100-PPE 1091003G-PPFSUL 10108033G-PPSA 10125033H-PPM It looks to me that first the items are sorted according to the position of the first alphabetic character in the name, and then, within those groups, they are sorted in "normal" alpha-numeric order. That is, all the files with an alpha character in the first position are on top of the list, followed by those with the first alpha character in the second position, followed by those with the first alpha character in the third position, and so on. An alternate way of looking at this is that, in a file name composed of numbers and letters, the sort treats the first group of numbers in the name as the major sort node, with the rest of the name being the secondary sort node. Now that I understand the sequencing logic, it's not a big problem, but I was wondering why this happens?

    Read the article

  • Can an image based backup potentially corrupt data?

    - by ServerAdminGuy45
    I'm considering doing image based backups (Acronis) on production Windows systems during non-peak hours. I'm just wondering if they can potentially lead to application data corruption. Lets say that I have a database that is getting hit pretty hard. Could I potentially have the beginning blocks of the database be commit ed to the image, data inserted into the db (which changes the beginning blocks of the DB on the server but not the image), then the blocks of data committed to the image (leading to an inconsistent state). Here's an example of what I'm trying to illustrate. Imagine a simple data structure which has a number in the front which represents the number of "a"s in a file. The number and data are delimited by a "-". For example: 4-ajjjjjjjajuuuuuuuaoffffa If an "a" is changed, the datastructure resets the number in the begining of the file such as: 3-ajjjjjjjajuuuuuuuboffffa I assume acronis writes block by block being a straight up image so here is what i'm invisioning happening with my database t0: 4-ajjjjjjjajuuuuuuuaoffffa ^pointer is here t1: 4-ajjjjjjjajuuuuuuuaoffffa ^pointer is here (all data before this is comitted to the image) t2: 4-ajjjjjjjajuuuuuuuboffffa ^pointer is here (all data before this is comitted to the image) Also notice how one of the "a"s change to a b. There are only 3 "a"s now t3: 4-ajjjjjjjajuuuuuuuboffffa ^pointer is here (all data before this is comitted to the image) The final image now reads "4-ajjjjjjjajuuuuuuuboffffa", while the true data is "3-ajjjjjjjajuuuuuuuboffffa" leading to a corrupt "database". Basically changes further down the blockchain could be reflected in the image, while important header and synchronization could already be committed. The out of date header information doesn't accurately reflect the structure of the blocks to come.

    Read the article

  • Force SSL on one page via .htaccess without looping

    - by Will Martin
    Okay, I have this code: RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} ^/borrowing/ill/request\.php$ RewriteRule ^.*$ https://%{HTTP_HOST}%{REQUEST_URI} [R,L] The way I would expect this to work is: A request for /borrowing/ill/request.php comes in on HTTP. The rule matches. The server redirects to HTTPS. The rule does not match, because HTTPS is now on. The way it actually works is: A request for /borrowing/ill/request.php comes in on HTTP. The rule matches. The server redirects to HTTPS. The rule matches. The server redirects to HTTPS. The rule matches. The server redirects to HTTPS ... And so on. I know that the second condition (matching the file name) is working, because the redirect loop only hits that specific page. The question is, why isn't the switch to HTTPS causing the first condition to not match? EDIT: I put the exact same .htaccess rules into a test area on another server -- same file and path info. And they worked just fine. There's got to be something wrong with the server configuration elsewhere.

    Read the article

  • backupexec 12.5 not following symlinks on linux agent

    - by Peter Carrero
    Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

    Read the article

  • Using multiple computers effectively

    - by Benjamin Oakes
    I have some extra (old) Macs and PCs around the house and a MacBook that's sometimes overworked. I'm looking for tips on using multiple computers effectively. Basically, I'd like to add to the following list. Here's what I'm using so far: Teleport: lets you use a single mouse and keyboard to control several Macs, like Synergy Built-in file sharing: lets me run programs on another Mac, but only maintain one copy of the data Bazaar: distributed version control Mail.app, Thunderbird, etc.: IMAP for my mail accounts TuneConnect: control iTunes on another Mac with a nice interface, using the library on my MacBook (if I choose it by pressing option at startup) over file sharing OmniFocus: syncs across computers pretty seamlessly Web browsing across computers VNC/Remote Desktop Running X-windows programs using ssh -Y hostname for headless operation (but they die when I sleep the connecting computer -- something like GNU screen would be ideal) Plain-old ssh with GNU screen Really, a better idea of what I do might be necessary. Generally though, I'd like to distribute tasks across more than one computer when possible, but not have much overhead in doing so. The perfect solution? An Xgrid-like program that pushes processing across multiple computers automatically and seamlessly (although that seems unlikely). Here's what I have, in case it makes a difference: MacBook (Dual 2.16 GHz, OS X 10.6.3) eMac (1.25 GHz, OS X 10.4.11, soon to be 10.5) Dell Dimension (800 MHz, some version of Ubuntu) -- no dedicated monitor PowerMac G3 (400 MHz, OS X 10.4.11) -- no dedicated monitor iMac G3 DV (400 MHz, OS X 10.4.11) -- currently in the kitchen for recipes, email, web browsing, music, movies (DVDs), etc. (Total, they cost me around $650, mostly for the MacBook. Freecycle is wonderful, just in case you haven't heard of it.) I'm really only using the MacBook and eMac at this point, but I'd like to push more onto it and possibly the PowerMac and Dell.

    Read the article

  • How to avoid Windows Genuine Advantage for an XP update?

    - by hlovdal
    I am about to apply updates to a windows xp installation I have not booted in a couple of years. When going to update.microsoft.com, it forced me first to accept an activex installation and now it wants me to install wga: Windows Update To use this latest version of Windows Update, you will need to upgrade some of its components. This version provides you with the following enhancements to our service: <... useless list of "advantages" ... Details Windows Genuine Advantage Validation Tool (KB892130) 1.1 MB , less than 1 minute The Windows Genuine Advantage Validation Tool enables you to verify that your copy of Microsoft Windows is genuine. The tool validates your Windows installation by checking Windows Product Identification and Product Activation status. Update for Windows XP (KB898461) 477 KB , less than 1 minute This update installs a permanent copy of Package Installer for Windows to enable software updates to have a significantly smaller download size. The Package Installer facilitates the install of software updates for Microsoft Windows operating systems and other Microsoft products. After you install this update, you may have to restart your system. Total: 1.5 MB , less than 1 minute I have heard nothing but bad things about wga, and I absolutely do not want it installed on my system (this answer seems to give some options). Searching for "windows xp" at microsoft's web pages brought up this page which says Windows XP Service Pack 3 Network Installation Package for IT Professionals and Developers Brief Description This installation package is intended for IT professionals and developers downloading and installing on multiple computers on a network. If you're updating just one computer, please visit Windows Update at http://update.microsoft.com . ... File Name: WindowsXP-KB936929-SP3-x86-ENU.exe I am currently downloading this file. Will installing this bring my installation up to date with security updates? What about later updates whenever a new problem is discovered, how can i update without using wga?

    Read the article

  • How to change mod_rewrite to avoid {REQUEST_FILENAME} in order to get around 255 character URL limit?

    - by Jeremy Reimer
    According to this answer: max length of url 257 characters for mod_rewrite? there is a maximum 255 character hard limit based on the file system for using mod_rewrite. According to the accepted answer, there are two solutions: Change the URL format of your application to a max of 255 characters between each slash. Move the Rewrite rules into the apache virtual host config and remove the REQUEST_FILENAME. I cannot use the first method, so I am trying to figure out the second. I have put the Rewrite rules into the Apache virtual host config as requested. However I cannot figure out how to remove the REQUEST_FILENAME and still have my web application framework (Dragonfly) still work. Here is the portion of the rewrite rules that I moved from .htaccess into the virtual host config file of Apache: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-l RewriteCond %{REQUEST_FILENAME} !-f [OR] # if don't want Dragonfly to process html files comment # out the line below (you may need to remove the [OR] above too). RewriteCond %{REQUEST_FILENAME} \.(html|nl)$ # Main URL rewriting. RewriteRule (.*) index.cgi?$1 [L,QSA] I've tried removing {REQUEST_FILENAME} and it just breaks the framework in various ways. How do I rewrite this without using {REQUEST_FILENAME}?

    Read the article

< Previous Page | 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679  | Next Page >