Search Results

Search found 15994 results on 640 pages for 'accuracy problems'.

Page 168/640 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • Networking issues with Linux server (CentOS 5.3)

    - by sxanness
    I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Forefront TMG vs pfSense

    - by Macropus
    We currently run pfSense with no problems, however we are looking at TMG as it is included in our partner subscription to MS and allows Windows 7 DirectConnect features to our domain for off-site users. I have had a google, but there don't seem to be any comparisons of TMG to pfSense. Anyone have experience/knowledge of this? Our infrastructure is Windows Server 2008 R2 behind pfSense at the moment.

    Read the article

  • Httpd + Expect Script Fail (no more ptys) if httpd is not run through cli

    - by Apostolis
    I have a CentOS virtual server through Vmware. The server runs an httpd daemon which serves an php page with a form. The users complete the form, and by clicking submit the php page calls an expect scripts. If i run the httpd throught the default init.d script i get a "no more ptys" error, but if i run httpd through root terminal the script runs without problems. How can i make the httpd run the expect scripts without having to run the httpd daemon by hand.

    Read the article

  • dbus dependency with yum

    - by Hengjie
    Whenever, I try and run yum update I get the following error: [root@server ~]# yum update Loaded plugins: dellsysid, fastestmirror Loading mirror speeds from cached hostfile * base: mirror01.idc.hinet.net * extras: mirror01.idc.hinet.net * rpmforge: fr2.rpmfind.net * updates: mirror01.idc.hinet.net Excluding Packages in global exclude list Finished Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package NetworkManager.x86_64 1:0.7.0-13.el5 set to be updated ---> Package NetworkManager-glib.x86_64 1:0.7.0-13.el5 set to be updated ---> Package SysVinit.x86_64 0:2.86-17.el5 set to be updated ---> Package acl.x86_64 0:2.2.39-8.el5 set to be updated ---> Package acpid.x86_64 0:1.0.4-12.el5 set to be updated ---> Package apr.x86_64 0:1.2.7-11.el5_6.5 set to be updated ---> Package aspell.x86_64 12:0.60.3-12 set to be updated ---> Package audit.x86_64 0:1.8-2.el5 set to be updated ---> Package audit-libs.x86_64 0:1.8-2.el5 set to be updated ---> Package audit-libs-python.x86_64 0:1.8-2.el5 set to be updated ---> Package authconfig.x86_64 0:5.3.21-7.el5 set to be updated ---> Package autofs.x86_64 1:5.0.1-0.rc2.163.el5 set to be updated ---> Package bash.x86_64 0:3.2-32.el5 set to be updated ---> Package bind.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package bind-libs.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package bind-utils.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package binutils.x86_64 0:2.17.50.0.6-20.el5 set to be updated ---> Package centos-release.x86_64 10:5-8.el5.centos set to be updated ---> Package centos-release-notes.x86_64 0:5.8-0 set to be updated ---> Package coreutils.x86_64 0:5.97-34.el5_8.1 set to be updated ---> Package cpp.x86_64 0:4.1.2-52.el5 set to be updated ---> Package cpuspeed.x86_64 1:1.2.1-10.el5 set to be updated ---> Package crash.x86_64 0:5.1.8-1.el5.centos set to be updated ---> Package cryptsetup-luks.x86_64 0:1.0.3-8.el5 set to be updated ---> Package cups.x86_64 1:1.3.7-30.el5 set to be updated ---> Package cups-libs.x86_64 1:1.3.7-30.el5 set to be updated ---> Package curl.x86_64 0:7.15.5-15.el5 set to be updated --> Processing Dependency: dbus = 1.1.2-15.el5_6 for package: dbus-libs ---> Package dbus.x86_64 0:1.1.2-16.el5_7 set to be updated ---> Package dbus-libs.x86_64 0:1.1.2-16.el5_7 set to be updated ---> Package device-mapper.x86_64 0:1.02.67-2.el5 set to be updated ---> Package device-mapper-event.x86_64 0:1.02.67-2.el5 set to be updated ---> Package device-mapper-multipath.x86_64 0:0.4.7-48.el5_8.1 set to be updated ---> Package dhclient.x86_64 12:3.0.5-31.el5 set to be updated ---> Package dmidecode.x86_64 1:2.11-1.el5 set to be updated ---> Package dmraid.x86_64 0:1.0.0.rc13-65.el5 set to be updated ---> Package dmraid-events.x86_64 0:1.0.0.rc13-65.el5 set to be updated ---> Package dump.x86_64 0:0.4b41-6.el5 set to be updated ---> Package e2fsprogs.x86_64 0:1.39-33.el5 set to be updated ---> Package e2fsprogs-devel.x86_64 0:1.39-33.el5 set to be updated ---> Package e2fsprogs-libs.x86_64 0:1.39-33.el5 set to be updated ---> Package ecryptfs-utils.x86_64 0:75-8.el5 set to be updated ---> Package file.x86_64 0:4.17-21 set to be updated ---> Package finger.x86_64 0:0.17-33 set to be updated ---> Package firstboot-tui.x86_64 0:1.4.27.9-1.el5.centos set to be updated ---> Package freetype.x86_64 0:2.2.1-28.el5_7.2 set to be updated ---> Package freetype-devel.x86_64 0:2.2.1-28.el5_7.2 set to be updated ---> Package ftp.x86_64 0:0.17-37.el5 set to be updated ---> Package gamin.x86_64 0:0.1.7-10.el5 set to be updated ---> Package gamin-python.x86_64 0:0.1.7-10.el5 set to be updated ---> Package gawk.x86_64 0:3.1.5-15.el5 set to be updated ---> Package gcc.x86_64 0:4.1.2-52.el5 set to be updated ---> Package gcc-c++.x86_64 0:4.1.2-52.el5 set to be updated ---> Package glibc.i686 0:2.5-81.el5_8.1 set to be updated ---> Package glibc.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-common.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-devel.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-headers.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package gnutls.x86_64 0:1.4.1-7.el5_8.2 set to be updated ---> Package groff.x86_64 0:1.18.1.1-13.el5 set to be updated ---> Package gtk2.x86_64 0:2.10.4-21.el5_7.7 set to be updated ---> Package gzip.x86_64 0:1.3.5-13.el5.centos set to be updated ---> Package hmaccalc.x86_64 0:0.9.6-4.el5 set to be updated ---> Package htop.x86_64 0:1.0.1-2.el5.rf set to be updated ---> Package hwdata.noarch 0:0.213.26-1.el5 set to be updated ---> Package ifd-egate.x86_64 0:0.05-17.el5 set to be updated ---> Package initscripts.x86_64 0:8.45.42-1.el5.centos set to be updated ---> Package iproute.x86_64 0:2.6.18-13.el5 set to be updated ---> Package iptables.x86_64 0:1.3.5-9.1.el5 set to be updated ---> Package iptables-ipv6.x86_64 0:1.3.5-9.1.el5 set to be updated ---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-13.el5 set to be updated ---> Package kernel.x86_64 0:2.6.18-308.1.1.el5 set to be installed ---> Package kernel-headers.x86_64 0:2.6.18-308.1.1.el5 set to be updated ---> Package kpartx.x86_64 0:0.4.7-48.el5_8.1 set to be updated ---> Package krb5-devel.x86_64 0:1.6.1-70.el5 set to be updated ---> Package krb5-libs.x86_64 0:1.6.1-70.el5 set to be updated ---> Package krb5-workstation.x86_64 0:1.6.1-70.el5 set to be updated ---> Package ksh.x86_64 0:20100621-5.el5_8.1 set to be updated ---> Package kudzu.x86_64 0:1.2.57.1.26-3.el5.centos set to be updated ---> Package less.x86_64 0:436-9.el5 set to be updated ---> Package lftp.x86_64 0:3.7.11-7.el5 set to be updated ---> Package libX11.x86_64 0:1.0.3-11.el5_7.1 set to be updated ---> Package libX11-devel.x86_64 0:1.0.3-11.el5_7.1 set to be updated ---> Package libXcursor.x86_64 0:1.1.7-1.2 set to be updated ---> Package libacl.x86_64 0:2.2.39-8.el5 set to be updated ---> Package libgcc.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libgomp.x86_64 0:4.4.6-3.el5.1 set to be updated ---> Package libpng.x86_64 2:1.2.10-16.el5_8 set to be updated ---> Package libpng-devel.x86_64 2:1.2.10-16.el5_8 set to be updated ---> Package libsmbios.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package libstdc++.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libsysfs.x86_64 0:2.1.0-1.el5 set to be updated ---> Package libusb.x86_64 0:0.1.12-6.el5 set to be updated ---> Package libvolume_id.x86_64 0:095-14.27.el5_7.1 set to be updated ---> Package libxml2.x86_64 0:2.6.26-2.1.15.el5_8.2 set to be updated ---> Package libxml2-python.x86_64 0:2.6.26-2.1.15.el5_8.2 set to be updated ---> Package logrotate.x86_64 0:3.7.4-12 set to be updated ---> Package lsof.x86_64 0:4.78-6 set to be updated ---> Package lvm2.x86_64 0:2.02.88-7.el5 set to be updated ---> Package m2crypto.x86_64 0:0.16-8.el5 set to be updated ---> Package man.x86_64 0:1.6d-2.el5 set to be updated ---> Package man-pages.noarch 0:2.39-20.el5 set to be updated ---> Package mcelog.x86_64 1:0.9pre-1.32.el5 set to be updated ---> Package mesa-libGL.x86_64 0:6.5.1-7.10.el5 set to be updated ---> Package mesa-libGL-devel.x86_64 0:6.5.1-7.10.el5 set to be updated ---> Package microcode_ctl.x86_64 2:1.17-1.56.el5 set to be updated ---> Package mkinitrd.x86_64 0:5.1.19.6-75.el5 set to be updated ---> Package mktemp.x86_64 3:1.5-24.el5 set to be updated --> Processing Dependency: nash = 5.1.19.6-68.el5_6.1 for package: mkinitrd ---> Package nash.x86_64 0:5.1.19.6-75.el5 set to be updated ---> Package net-snmp.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-devel.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-libs.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-utils.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-tools.x86_64 0:1.60-82.el5 set to be updated ---> Package nfs-utils.x86_64 1:1.0.9-60.el5 set to be updated ---> Package nfs-utils-lib.x86_64 0:1.0.8-7.9.el5 set to be updated ---> Package nscd.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package nspr.x86_64 0:4.8.9-1.el5_8 set to be updated ---> Package nspr-devel.x86_64 0:4.8.9-1.el5_8 set to be updated ---> Package nss.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss-devel.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss-tools.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss_ldap.x86_64 0:253-49.el5 set to be updated ---> Package ntp.x86_64 0:4.2.2p1-15.el5.centos.1 set to be updated ---> Package numactl.x86_64 0:0.9.8-12.el5_6 set to be updated ---> Package oddjob.x86_64 0:0.27-12.el5 set to be updated ---> Package oddjob-libs.x86_64 0:0.27-12.el5 set to be updated ---> Package openldap.x86_64 0:2.3.43-25.el5 set to be updated ---> Package openssh.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssh-clients.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssh-server.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssl.i686 0:0.9.8e-22.el5_8.1 set to be updated ---> Package openssl.x86_64 0:0.9.8e-22.el5_8.1 set to be updated ---> Package openssl-devel.x86_64 0:0.9.8e-22.el5_8.1 set to be updated ---> Package pam_krb5.x86_64 0:2.2.14-22.el5 set to be updated ---> Package pam_pkcs11.x86_64 0:0.5.3-26.el5 set to be updated ---> Package pango.x86_64 0:1.14.9-8.el5.centos.3 set to be updated ---> Package parted.x86_64 0:1.8.1-29.el5 set to be updated ---> Package pciutils.x86_64 0:3.1.7-5.el5 set to be updated ---> Package perl.x86_64 4:5.8.8-38.el5 set to be updated ---> Package perl-Compress-Raw-Bzip2.x86_64 0:2.037-1.el5.rf set to be updated ---> Package perl-Compress-Raw-Zlib.x86_64 0:2.037-1.el5.rf set to be updated ---> Package perl-rrdtool.x86_64 0:1.4.7-1.el5.rf set to be updated ---> Package poppler.x86_64 0:0.5.4-19.el5 set to be updated ---> Package poppler-utils.x86_64 0:0.5.4-19.el5 set to be updated ---> Package popt.x86_64 0:1.10.2.3-28.el5_8 set to be updated ---> Package postgresql-libs.x86_64 0:8.1.23-1.el5_7.3 set to be updated ---> Package procps.x86_64 0:3.2.7-18.el5 set to be updated ---> Package proftpd.x86_64 0:1.3.4a-1.el5.rf set to be updated --> Processing Dependency: perl(Mail::Sendmail) for package: proftpd ---> Package python.x86_64 0:2.4.3-46.el5 set to be updated ---> Package python-ctypes.x86_64 0:1.0.2-3.el5 set to be updated ---> Package python-libs.x86_64 0:2.4.3-46.el5 set to be updated ---> Package python-smbios.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package rhpl.x86_64 0:0.194.1-2 set to be updated ---> Package rmt.x86_64 0:0.4b41-6.el5 set to be updated ---> Package rng-utils.x86_64 1:2.0-5.el5 set to be updated ---> Package rpm.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-build.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-devel.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-libs.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-python.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rrdtool.x86_64 0:1.4.7-1.el5.rf set to be updated ---> Package rsh.x86_64 0:0.17-40.el5_7.1 set to be updated ---> Package rsync.x86_64 0:3.0.6-4.el5_7.1 set to be updated ---> Package ruby.x86_64 0:1.8.5-24.el5 set to be updated ---> Package ruby-libs.x86_64 0:1.8.5-24.el5 set to be updated ---> Package sblim-sfcb.x86_64 0:1.3.11-49.el5 set to be updated ---> Package sblim-sfcc.x86_64 0:2.2.2-49.el5 set to be updated ---> Package selinux-policy.noarch 0:2.4.6-327.el5 set to be updated ---> Package selinux-policy-targeted.noarch 0:2.4.6-327.el5 set to be updated ---> Package setup.noarch 0:2.5.58-9.el5 set to be updated ---> Package shadow-utils.x86_64 2:4.0.17-20.el5 set to be updated ---> Package smartmontools.x86_64 1:5.38-3.el5 set to be updated ---> Package smbios-utils-bin.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package smbios-utils-python.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package sos.noarch 0:1.7-9.62.el5 set to be updated ---> Package srvadmin-omilcore.x86_64 0:6.5.0-1.452.1.el5 set to be updated ---> Package strace.x86_64 0:4.5.18-11.el5_8 set to be updated ---> Package subversion.x86_64 0:1.6.11-7.el5_6.4 set to be updated ---> Package sudo.x86_64 0:1.7.2p1-13.el5 set to be updated ---> Package sysfsutils.x86_64 0:2.1.0-1.el5 set to be updated ---> Package syslinux.x86_64 0:3.11-7 set to be updated ---> Package system-config-network-tui.noarch 0:1.3.99.21-1.el5 set to be updated ---> Package talk.x86_64 0:0.17-31.el5 set to be updated ---> Package tar.x86_64 2:1.15.1-31.el5 set to be updated ---> Package traceroute.x86_64 3:2.0.1-6.el5 set to be updated ---> Package tzdata.x86_64 0:2012b-3.el5 set to be updated ---> Package udev.x86_64 0:095-14.27.el5_7.1 set to be updated ---> Package util-linux.x86_64 0:2.13-0.59.el5 set to be updated ---> Package vixie-cron.x86_64 4:4.1-81.el5 set to be updated ---> Package wget.x86_64 0:1.11.4-3.el5_8.1 set to be updated ---> Package xinetd.x86_64 2:2.3.14-16.el5 set to be updated ---> Package yp-tools.x86_64 0:2.9-2.el5 set to be updated ---> Package ypbind.x86_64 3:1.19-12.el5_6.1 set to be updated ---> Package yum.noarch 0:3.2.22-39.el5.centos set to be updated ---> Package yum-dellsysid.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package yum-fastestmirror.noarch 0:1.1.16-21.el5.centos set to be updated ---> Package zlib.x86_64 0:1.2.3-4.el5 set to be updated ---> Package zlib-devel.x86_64 0:1.2.3-4.el5 set to be updated --> Running transaction check --> Processing Dependency: dbus = 1.1.2-15.el5_6 for package: dbus-libs --> Processing Dependency: nash = 5.1.19.6-68.el5_6.1 for package: mkinitrd ---> Package perl-Mail-Sendmail.noarch 0:0.79-1.2.el5.rf set to be updated base/filelists | 3.5 MB 00:00 dell-omsa-indep/filelists | 195 kB 00:01 dell-omsa-specific/filelists | 1.0 kB 00:00 extras/filelists_db | 224 kB 00:00 rpmforge/filelists | 4.8 MB 00:06 updates/filelists_db | 715 kB 00:00 --> Finished Dependency Resolution dbus-libs-1.1.2-15.el5_6.i386 from installed has depsolving problems --> Missing Dependency: dbus = 1.1.2-15.el5_6 is needed by package dbus-libs-1.1.2-15.el5_6.i386 (installed) mkinitrd-5.1.19.6-68.el5_6.1.i386 from installed has depsolving problems --> Missing Dependency: nash = 5.1.19.6-68.el5_6.1 is needed by package mkinitrd-5.1.19.6-68.el5_6.1.i386 (installed) Error: Missing Dependency: nash = 5.1.19.6-68.el5_6.1 is needed by package mkinitrd-5.1.19.6-68.el5_6.1.i386 (installed) Error: Missing Dependency: dbus = 1.1.2-15.el5_6 is needed by package dbus-libs-1.1.2-15.el5_6.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. I have tried running package-cleanup --dupes and package-cleanup --problems but to no avail.

    Read the article

  • supermicro server ipmi problem - problem with keyboard layout

    - by maxs
    hi, we hava a supermicro server (x8dtl-if-O with suse 11): if i connect from my workstation (xppro-german)with the remote console i can not type any öä<... (on the server local - we have no problems - only remote). the keyboard layout of the workstation is german - if i switch the keyboard layout to english i can type öäü.... - but i don't can type <| ?? thx

    Read the article

  • Is there a way to route all traffic from Android through a proxy/tunnel to my Tomato router?

    - by endolith
    I'd like to be able to connect my Android phone to public Wi-Fi points with unencrypted connections, but People can see what I'm doing by intercepting my radio transmissions People who own the access point can see what I'm doing. There are tools like WeFi and probably others to automatically connect to access points, but I don't trust random APs. I'd like all my traffic to go through an encrypted tunnel to my home router, and from there out to the Internet. I've done such tunnels from other computers with SSH/SOCKS and PPTP before. Is there any way to do this with Android? I've asked the same question on Force Close, so I'll change this question to be about both sides of the tunnel. More specifically: My phone now has CyanogenMod 4.2.3 My router currently has Tomato Version 1.25 I'm willing to change the router firmware, but I was having issues with DD-WRT disconnecting, which is why I'm using Tomato. Some possible solutions: SSH with dynamic SOCKS proxy: Android supposedly supports this through ConnectBot, but I don't know how to get it to route all traffic. Tomato supports this natively. I've been using this with MyEntunnel for my web browsing at work. Requires setting up each app to go through the proxy, though. PPTP: Android supports this natively. Tomato does not support this, unless you get the jyavenard mod and compile it? I previously used PPTP for web browsing at work and in China because it's native in Windows and DD-WRT. After a while I started having problems with it, then I started having problems with DD-WRT, so I switched to the SSH tunnel instead. Also it supposedly has security flaws, but I don't understand how big of a problem it is. IPSec L2TP: Android (phone) and Windows (work/China) both support this natively I don't know of a router that does. I could run it on my computer using openswan, but then there are two points of failure. OpenVPN: CyanogenMod apparently includes this, and now has an entry to create a new OpenVPN in the normal VPN interface, but I have no idea how to configure it. TunnelDroid apparently handles some of this. Future versions will have native support in the VPN settings? Tomato does not support this, but there are mods that do? I don't know how to configure this, either. TomatoVPN roadkill mod SgtPepperKSU mod Thor mod I could also run a VPN server on my desktop, I guess, though that's less reliable and presumably slower than running it in the router itself. I could change the router firmware, but I'm wary of more fundamental things breaking. Tomato has been problem-free for the regular stuff. Related: Anyone set up a SSH tunnel to their (rooted) G1 for browsing?

    Read the article

  • Linux Exim set return-path header automaticly using from header

    - by solomongaby
    Hello, I use Exim on a Centos distribution and have some problems with the mail sending. In order to make all the email pass the spam filters the "Return-path" and "Sender" headers have to be attached to each email. What should I do in order to have "Return-path" and "Sender" headers added by Exim to be exactly the same as the "From" header created by my mail client ? Thanks

    Read the article

  • How to disable “smart quotes” in Windows Live Mail?

    - by Indrek
    Windows Live Mail by default changes straight quotation marks (" and ') to typographic quotation marks, aka "smart quotes" (“, ”, ‘ and ’). This often results in the recipient of the email seeing blank rectangles or other symbols instead of the smart quotes, due to encoding problems. Unlike in most programs, there's doesn't seem to be any built-in option to disable this, and searching online for solutions only leads to workarounds, like hitting Backspace immediately after typing a single or double quote, and switching to "Plain text" mode. Is there any way to disable this behaviour?

    Read the article

  • How to configure non-admin accounts to install updates of non-microsoft applications using Active Di

    - by MadBoy
    How to configure non-admin users to allow them to install updates for Java and Adobe Acrobat Reader (or any other application which may need such privileges) without needing for administrator password on Windows 7. Updates for Microsoft products install without problems. This can be Active Directory (Windows 2003) solution, or computer based (employable through GPO or login script).

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

  • Using nmap in Android SDK

    - by user34373
    How can I use nmap (port scanning utility) on the Android SDK emulator in Windows? I am trying to install a port scanner on Android SDK which is installed on Ubuntu. I have two problems: How do I install any Linux application on Android SDK? How do I copy the data from the local hard drive to the emulator?

    Read the article

  • Can't connect Gtalk from external services like meebo, or clients like iChat and Adium

    - by Juan Esteban Pemberthy
    I've been using Gtalk from the beginning, usually with the clients Adium and iChat, but suddenly my account stop working for those clients and other external services like meebo.com, the weird thing (for me) is that my username and password is fine since I can login without problems to any other service like Gmail, and from there I can use talk, the windows official client also works, any clues on what's going on?

    Read the article

  • Can't activate dynamic disk

    - by SuperFurryToad
    For some reason I can't activate a dynamic disk connected to my PC via a USB hard disk enclosure. It has activated previously without any problems. When I check the event logs, I get this message every time I try to activate the disk: dmio: Harddisk2 write error at block 2930277167: status 0xc0000015

    Read the article

  • Windows 7 on laptop hard drive does not boot after installing Windows to Go on external hard drive

    - by user1687031
    Just successfully installed and ran Windows 8's Windows to Go on a USB external hard drive. However, after shutting down and removing the USB hard disk, whey I to start my laptop (with only Windows 7 installed), but it doesn't boot and trying to repair it doesn't work. It seems that Windows 8 had corrupted the partition table on the laptop's hard drive, causing Windows 7 to fail to boot. How do I fix that and avoid future problems of the same type?

    Read the article

  • Setting up a Barracuda Spam Filter

    - by stead1984
    We have just purchased a Barracuda Spam Firewall 300, we have set it up but are having problems authenticating with our Exchange server (2007). I spoke to Barracuda about it and they said I need to exclude the Barracuda box from authentication from within Exchange, how do I do that?

    Read the article

  • How to set resolution on mplayer with libcaca?

    - by AndrejaKo
    I'm using mplayer and libcaca on Gentoo. My framebuffer (uvesafb) is running at 1920x1200 (I don't know how many characters that is) and mplayer has problems filling up the screen, so video and audio lose synchronization. I'm looking for ways to improve performance. The most obvious solution would be to decrease resolution of mplayer, so I'm looking for ways to do that. Any other performance tips would be appriciated.

    Read the article

  • Old operational master still thinks it is the "one"

    - by Doug
    Hi there, I have a domain with 3 AD servers for now i'll just call them: AD01 (Win 2008 GC, Operations master) AD02 (Win 2008 GC) AD03 (Win 2003 GC) A couple of months there was some hardware issues with AD01 so the operations master, PDC and Infrastructure Master was moved to AD02. All machines where on while this was happening. AD01 (Win 2008 GC) AD02 (Win 2008 GC, Operations master) AD03 (Win 2003 GC) AD01 was then shutdown for a month. Upon starting this machine up with replaced hardware (NIC and RAID card) i now have a weird problem. AD01 Thinks it is operations master still in AD on the local box AD02 & AD03 Thinks AD02 is operations master in AD on both boxes When running DCDIAG on AD01 i get a number of issues (listed below) When running "dcdiag /test:advertising" on AD01: Doing primary tests Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Running partition tests on : ForestDnsZones Running partition tests on : DomainDnsZones Running partition tests on : Schema Running partition tests on : Configuration Running partition tests on : domain Running enterprise tests on : domain.local When running "dcdiag" on AD01 i get the following errors (excerpt of the Final output): Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=domain,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=domain,DC=local Starting test: Replications [Replications Check,Replications Check] Inbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_INBOUND_REPL" [Replications Check,AD01] Outbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_OUTBOUND_REPL" So the problem appeasr to be that when i moved the operations master, AD01 never got the memo, and now that it's started up, all the other AD servers don't think its the boss anymore when it trys to replicate etc. So i really need to manually update AD01 so that it knows who the operations master, instrastructure and PDC is - but i'm not having any luck I've been googling for nearly a day and all solutions lead to "the cake is a lie" Your ninja skills will be greatly appreciated

    Read the article

  • PHP Can't connect to MySQL on the production server

    - by Jairo Santos
    I'm having problems with connections with MySQL through PHP script. The MySQL user is root and I added GRANTS to root@'%' so I can connect from anywhere. Lets assume my MySQL host as "bigboy.com.br" The funny part is, from my local machine, on my test server, the script can connect to the MySQL server normally. But on the dedicated server where MySQL is running, the same PHP script gives me "Access denied for 'root'@'bigboy.com.br'" error.

    Read the article

  • How to fix network connection dead on startup, but okay after disable/enable?

    - by bill weaver
    on Startup When my system starts up, the internet connection is dead. This causes various problems with startup items such as updates and auto-start programs failing. However, the connection is fine after going into Network and Sharing, Change adapter settings, then disabling and re-enabling the adapter. Any suggestions on why this is happening and how to fix it? System summary: Windows 7, 64 bit, Realtek PCIe GBE Family Controller, Linksys WRT610N router, Sci Atlanta cable modem.

    Read the article

  • BAD DC transfering FSMO Roles to ADC

    - by Suleman
    I have a DC (FQDN:server.icmcpk.local) and an ADC (FQDN:file-server.icmcpk.local). Recently my DC is facing a bad sector problem so I changed the Operation Masters to file-server for all five roles. but when ever i turn off the OLD DC the file-server also stops wroking with AD and GPMC further i m also unable to join any other computer to this domain. For Test purpose i also added a new ADC (FQDN:wds-server.icmcpk.local) but no succes with the old DC off i had to turn the old DC on and then joined it. I m attaching the Dcdiags for all three servers. Kindly help me so that i b able to reinstall new HDD and it can go online again. --------------------------------------- Server --------------------------------------- C:\Program Files\Support Tools>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity ......................... SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Starting test: Replications [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. ......................... SERVER passed test Replications Starting test: NCSecDesc ......................... SERVER passed test NCSecDesc Starting test: NetLogons ......................... SERVER passed test NetLogons Starting test: Advertising ......................... SERVER passed test Advertising Starting test: KnowsOfRoleHolders ......................... SERVER passed test KnowsOfRoleHolders Starting test: RidManager ......................... SERVER passed test RidManager Starting test: MachineAccount ......................... SERVER passed test MachineAccount Starting test: Services ......................... SERVER passed test Services Starting test: ObjectsReplicated ......................... SERVER passed test ObjectsReplicated Starting test: frssysvol ......................... SERVER passed test frssysvol Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... SERVER failed test frsevent Starting test: kccevent ......................... SERVER passed test kccevent Starting test: systemlog An Error Event occured. EventID: 0x80001778 Time Generated: 05/04/2012 14:05:39 Event String: The previous system shutdown at 1:26:31 PM on An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:07:45 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:13:40 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:38 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:22:57 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for ......................... SERVER failed test systemlog Starting test: VerifyReferences ......................... SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : icmcpk Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Running enterprise tests on : icmcpk.local Starting test: Intersite ......................... icmcpk.local passed test Intersite Starting test: FsmoCheck ......................... icmcpk.local passed test FsmoCheck ---------------------- File-Server ---------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = FILE-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Connectivity ......................... FILE-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach FILE-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... FILE-SERVER failed test Advertising Starting test: FrsEvent ......................... FILE-SERVER passed test FrsEvent Starting test: DFSREvent ......................... FILE-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... FILE-SERVER passed test SysVolCheck Starting test: KccEvent ......................... FILE-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... FILE-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... FILE-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... FILE-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\FILE-SERVER\netlogon) [FILE-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... FILE-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... FILE-SERVER passed test ObjectsReplicated Starting test: Replications ......................... FILE-SERVER passed test Replications Starting test: RidManager ......................... FILE-SERVER passed test RidManager Starting test: Services ......................... FILE-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x00000469 Time Generated: 05/04/2012 14:01:10 Event String: The processing of Group Policy failed because of lack of network con nectivity to a domain controller. This may be a transient condition. A success m essage would be generated once the machine gets connected to the domain controll er and Group Policy has succesfully processed. If you do not see a success messa ge for several hours, then contact your administrator. An Warning Event occurred. EventID: 0x8000A001 Time Generated: 05/04/2012 14:07:11 Event String: The Security System could not establish a secured connection with th e server ldap/icmcpk.local/[email protected]. No authentication protocol was available. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:34 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:36 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. ......................... FILE-SERVER failed test SystemLog Starting test: VerifyReferences ......................... FILE-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite --------------------- WDS-Server --------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = WDS-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Connectivity ......................... WDS-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach WDS-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... WDS-SERVER failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... WDS-SERVER passed test FrsEvent Starting test: DFSREvent ......................... WDS-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... WDS-SERVER passed test SysVolCheck Starting test: KccEvent ......................... WDS-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... WDS-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... WDS-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... WDS-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\WDS-SERVER\netlogon) [WDS-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... WDS-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... WDS-SERVER passed test ObjectsReplicated Starting test: Replications ......................... WDS-SERVER passed test Replications Starting test: RidManager ......................... WDS-SERVER passed test RidManager Starting test: Services ......................... WDS-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:02:55 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:08:33 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. ......................... WDS-SERVER failed test SystemLog Starting test: VerifyReferences ......................... WDS-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite

    Read the article

  • Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe

    - by Kyle Noland
    I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >