Search Results

Search found 41582 results on 1664 pages for 'fault tolerance'.

Page 168/1664 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• RRAS VPN Server on Windows 2008 Behind NAT

  - by Chris

  Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

  Read the article

• Windows Authentication behaves oddly when VPN'd

  - by Dan F

  Hi all We've got a few apps that rely on windows authentication - a couple of web apps with AD auth turned on and we usually connect to our SQL servers with windows auth. This normally runs without a hitch. It doesn't work so well if we're VPN'd to a client site though. SSMS Opening SSMS normally from the start menu, then picking a server that normally accepts windows auth, results in a message saying: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (.Net SqlClient Data Provider) If I drop to a command prompt and use runas /user:domain\user to launch SSMS I can successfully windows auth to our SQL server instances with that ssms process. If I look in task manager, both copies of ssms.exe (start menu vs runas) have the same user, and I can see no discernible differences between the processes in procexp. AD Auth websites If I open IE and browse to any of our websites that require an authenticated windows user, I get the "who are you" prompt, and that dialog thinks I'm whoever the VPN user is. I can click "Use another account" and authenticate that way though. Outlook Even Outlook prompts for a username when we are VPN'd! It's affecting our Win7 and Vista machines. It's been a while since we had an XP box, but I don't recall having this issue on XP for what it's worth. The VPN connections are just using the built in windows VPN connections, they're not fancy cisco VPNs or anything of that nature. Does anyone know how to tell windows that I'd like to be my normal old primary domain user rather than the VPN user when authenticating to resources in our domain? Heck, I'd be happy with a solution that prompted me with the "who are you" if I was trying to access windows auth requiring resources on the client's VPN. Thanks! Apologies if this is more a superuser question, I wasn't sure which site it best suited. It's about networking and infrastructure and plagues all of our developers here, so I hope it's a serverfault Q.

  Read the article

• Windows server 2008 issue

  - by Matt Fitz

  We have 2 domains “pdc1” and “devkc” both are windows 2000 Active Directory domains with a 2-way trust relationship in place., has been this way for years. All of our developer machines are joined to the “devkc” domain but the users log into there accounts on the “pdc1” domain. This all works fine with Windows XP, 2000 and 2003 server. However with Windows Server 2008 the users can only log into the “devkc” domain that the machine is joined to, they can not log into the “pdc1” domain. The following error results: "The security database on this server does not have a computer account for this workstation trust relationship” Any ideas would be greatly appreaciated Thanks Matt Fitz

  Read the article

• Puppet classes out of order despite explicit arrow operator use

  - by Alexandr Kurilin

  Absolute puppet beginner here. I'm experiencing an interesting behavior with my puppet manifests and would love to know what I'm doing wrong. Let's for example say I'm configuring the instance with the following ordered classes: class { 'update_system': } -> class { 'facter': } -> class { 'user_sshkey': user => 'ubuntu', type => 'rsa', } -> class { 'tmux': user => 'ubuntu', } -> class { 'vim': user => 'ubuntu', } -> class { 'bashrc': user => 'ubuntu' } -> notify {"Configuring DB role":} -> class { 'postgresql': } when I run the manifest with the --debug switch, by looking at notify statements I can see the classes be executed in the following order: 1. update_system starts 2. a cron type inside of postgresql class (the very **last** class in that ordered list above) is executed 3. postgres::install starts 5. facter starts installing 6. postgres::configure and postgres::service start 7. the vim class is executed 8. "Configuring DB role" notification is made. All the way at the end here. etc Basically the thing is all over the place, the order doesn't seem to follow the arrow operators in any way. I'm guessing I'm missing something here that would force the classes to execute one at a time. Could it be that I'm missing some kind of anchor pattern here? Invalid containment?

  Read the article

• Dovecot throws obsolete warnings, even though dovecot.conf updated on Ubuntu 11

  - by John Bowlinger

  In trying to set up SASL for dovecot on Ubuntu 11, I keep getting obsolete warnings in my log: Sep 10 15:33:53 server1 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: passdb {} has been replaced by passdb { driver= } Sep 10 15:33:53 server1 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:27: userdb {} has been replaced by userdb { driver= } Even though my dovecot.conf file looks like this: protocols = none auth default { mechanisms = plain login passdb { driver=pam } userdb { driver=passwd } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } Even when I try: driver=etc/pam.d/dovecot driver=etc/passwd I still get the same error. Looking at the example config file: cat /usr/share/doc/dovecot-common/dovecot/example-config/dovecot.conf was of no help. Dovecot is running: ps -A | grep 'dovecot' 9663 ? 00:00:00 dovecot But I can't seem to get that elusive "dovecot-auth" process. Anyone know what's going on?

  Read the article

• Debian - "WARNING: untrusted versions of the following packages will be installed!"

  - by user1794469

  When i try to install or update any packages I get: Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. I strongly suspect this is related to the error i get on update: $ sudo aptitude update Get: 1 http://ftp.us.debian.org wheezy InRelease [208 kB] Get: 2 http://debian.lcs.mit.edu wheezy InRelease [208 kB] Ign http://ftp.us.debian.org wheezy InRelease Hit http://ftp.us.debian.org wheezy/main amd64 Packages/DiffIndex Hit http://ftp.us.debian.org wheezy/contrib amd64 Packages/DiffIndex Hit http://ftp.us.debian.org wheezy/non-free amd64 Packages/DiffIndex Hit http://ftp.us.debian.org wheezy/contrib Translation-en Hit http://ftp.us.debian.org wheezy/main Translation-en Hit http://ftp.us.debian.org wheezy/non-free Translation-en Get: 3 http://debian.lcs.mit.edu wheezy-updates InRelease [116 kB] Ign http://debian.lcs.mit.edu wheezy InRelease Ign http://debian.lcs.mit.edu wheezy-updates InRelease Hit http://debian.lcs.mit.edu wheezy/main Sources/DiffIndex Hit http://debian.lcs.mit.edu wheezy/main amd64 Packages/DiffIndex Hit http://debian.lcs.mit.edu wheezy/main Translation-en Ign http://ftp.us.debian.org wheezy/contrib Translation-en_US Ign http://debian.lcs.mit.edu wheezy-updates/main Sources/DiffIndex Ign http://debian.lcs.mit.edu wheezy-updates/main amd64 Packages/DiffIndex Ign http://ftp.us.debian.org wheezy/main Translation-en_US Ign http://ftp.us.debian.org wheezy/non-free Translation-en_US Hit http://debian.lcs.mit.edu wheezy-updates/main Sources Hit http://debian.lcs.mit.edu wheezy-updates/main amd64 Packages Ign http://debian.lcs.mit.edu wheezy/main Translation-en_US Ign http://debian.lcs.mit.edu wheezy-updates/main Translation-en_US Ign http://debian.lcs.mit.edu wheezy-updates/main Translation-en Fetched 531 kB in 1s (304 kB/s) W: GPG error: http://ftp.us.debian.org wheezy InRelease: Unknown error executing gpgv W: GPG error: http://debian.lcs.mit.edu wheezy InRelease: Unknown error executing gpgv W: GPG error: http://debian.lcs.mit.edu wheezy-updates InRelease: Unknown error executing gpgv I have tried reinstalling the key ring: sudo aptitude reinstall debian-archive-keyring (which surprisingly doesn't cause a warning).

  Read the article

• weblogic plug-in apache http server location directive question

  - by user39510

  We are using Weblogic Portal and Apache 2.x http server with the weblogic plug-in for apache for load-balancing. We have an application that right now can only be accessed from one of our managed servers. What I would like to do is use the Location directive to direct all requests for that page to the one managed server and I can't get it to work. The context that the portal tries to forward to is something like /MyWebApp?portalusername= (where equals a legitimate user. For example /MyWebApp?portalusername=joesmith. All other applications and the plug-in is load balancing as expected because every now and then you'll get sent to the second managed server for this particular application and its not deployed. I tried various things in the Apache http.conf like the following but can't seem to get it work. Any suggestions? The following is a snippet of the httpd.conf. Its a standard out of the box httpd.conf file with the weblogic plugin configuration. <Location /MyWebApp> SetHandler weblogic-handler WebLogicCluster myserver:7011 </Location> <Location /?> SetHandler weblogic-handler WebLogicCluster myserver:7011, myserver2:7012 </Location>

  Read the article

• Transition domain to new web host without waiting for DNS propagation

  - by jcmoney

  I was considering switching to Amazon EC2 to host my website to handle more traffic. It seems like I would have to update DNS records to point to the new server but I was wondering if there was a way to avoid having to wait for the new DNS record to propagate. Putting the code on both hosts would not work for me since the app writes to a database pretty frequently. I thought about just using a meta redirect or php redirect on the old host to redirect to the new host ip but was wondering if there's a better more accepted way of doing this.

  Read the article

• How to connect Home Folder using PowerShell

  - by Maximus

  I tried to create user using New-QADUser cmdlet. I know this cmdlet has -HomeDrive switch. But the problem is that cmdlet is just applying path string to user's account and not creating user's home directory on the fileserver like it happens when you use ADUC console. How can I do it corerctly?

  Read the article

• Apache2 Enabling Includes module causes svn access to quit working

  - by Matthew Talbert

  I have dav_svn installed to provide http access to my svn repos. The url is directly under root, eg mywebsite.com/svn/individual-repo. This setup has been working great for some time. Now, I need SSI (server-side includes) for a project, so I enabled this module with a2enmod include. Now, tortoisesvn can't access the repo; it always returns a 301 permanent redirect. Some playing with it reveals I can access it in a browser if I'm sure to include the trailing / but it still doesn't work in TortoiseSVN. I've looked at all of the faq's for this problem with TortoiseSVN and apache, and none of them seem to apply to my problem. Anyone have any insight into this problem? I'm running Ubuntu 9.10 with Apache 2.2.12. The only change I've made to my configuration is to enable the includes mod. Here's my dav_svn conf: <Location /svn> DAV svn SVNParentPath /home/matthew/svn AuthType Basic AuthName "Subversion repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> and here's the relevant part of my virtual host conf: <Location /svn> SetHandler None Order allow,deny Allow from all </Location> Edit: OK, I've discovered that the real conflict is between the include module and basic authentication. That is, if I disable the include module, browse to the subversion repo, enter my user/pass for the basic authentication, I can browse it just fine. It even continues to work after I re-enable the include module. However, if I browse with another browser where I'm not already authenticated, then it no longer works.

  Read the article

• How to aggregate data in Windows Performance Monitor?

  - by Jader Dias

  I have seem performance counters like this: PhysicalDisk(_Total)\Avg. Disk Read Queue Length Which is an aggregation (average, sum, etc) of data over a period. How to create a custom counter which is an aggregation of existent data of another counter?

  Read the article

• API Management Solutions

  - by Mike

  I'm currently building an API and am looking for a tool to allow me to monitor (in a GUI) and rate limit usage. I've come across a few enterprise solutions including: http://apigee.com/ http://mashery.com/ http://www.layer7tech.com/ http://www.3scale.net/ The Apigee enterprise plan is exactly what I'm looking for but plans start at $3000 / month which is out of my price range. The other solutions are all either to expense or do not provide the solution I'm looking for. This led me to look at some open source options including: http://apiaxle.com/ https://code.google.com/p/varnish-apikey/wiki/UsageManual Varnish seems like a fairly complete solution, however I would need to build a GUI to visualise the data. My final option would to build a solution from scratch using EventMachine and ruby. Any advice?

  Read the article

• Exchange Server 2010: move mailboxes from recoveded and mounted edb to user’s mailbox

  - by user36090

  One of our exchange servers crashed, and I am trying to recover the mailboxes. We had 1 exchange 2003 server named "apex" and 1 exchange 2010 server named "2008Enterprise. the exchange 2010 server named "2008Enterprise" crashed. I created a new exchange 2010 server named "Providence". I ran the command on Providence: New-MailboxDatabase -Recovery -Name JBCMail -Server Providence -EdbFilePath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147\Mailbox Database 0579285147.edb" -LogFolderPath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147" this command executed and finished without error I then ran the command: eseutil /p E00 this command was executed from the below directory: c:\data\Exchange\Mailbox\Mailbox Database 0579285147 I then mounted the JBCMail with the mount command note: I do not have my full typed command. Inside my Exchange Management Console (EMC) I can view the new mailbox database named JBCMail. The JBCMail database is show as mounted on the exchange server named Providence. I can see the crashed Exchange server named 2008Exchange. In the EMC the crashed exchange server states the Copy Status under ServerConfiguration-Mailbox is ServiceDown. From here I need to recover three mailboxes The mail boxes are on the apex server. How do I move the mailboxs from apex to Providence? How do I restore the mailboxes from JBCmail mounted database to the user's mailbox? I do not fully understand how to use the Restore-Mailbox command because when I use this command it tries to restore the mailbox to the dead apex server. Restore-Mailbox -ID 'Jason Young' -RecoveryDatabase JBCMail

  Read the article

• Unexpected behaviour when dynamically add node in HAproxy server

  - by Anand Soni

  I wanted to use HAProxy for my web app for load balancing purpose. I am trying to add a new rabbitmq node dynamically in HAProxy server using command : haproxy -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid). I am doing tcp connection mode with leastconn balance algorithm in load balancing. What is expected is when there is 3 connection in one rabbitmq, I add a new rabbit server in HAProxy server. so the next connection would pass to 2nd rabbitmq server which is not happening in my case. It distributes the connection in haphazardly manner. Here is my config file: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 5000 srvtimeout 5000 listen rabbitmq 0.0.0.0:5672 mode tcp stats enable balance leastconn option tcplog server rabbit01 xx.xx.xx.xx:5672 check server rabbit02 xx.xx.xx.xx:5672 check listen tomcatq 0.0.0.0:80 mode http stats enable balance roundrobin stats refresh 10s stats refresh 10s stats uri /lb?stats stats auth admin:admin option httplog What is the problem causing this behavior? Any suggestion will appreciated.

  Read the article

• AFP painfully slow

  - by yairchu

  Copying a file using AFP took 40 minutes but using scp it only took 7 mins. Why is AFP so slow? My setup: D-Link DIR-300 wifi router iMac with Snow-Leopard serves AFP Macbook with Leopard is the client

  Read the article

• wget not working with domain on local machine

  - by user568829

  Basically - I have some PHP scripts that need to be run as cron jobs. Lets say the script needing to be run is: http://admin.somedomain.com/cron_jobs/get_stats If I run the script from the local machine it gives me a 404 Not Found error. So I entered the following into /etc/hosts XX.XX.XX.45 admin.somedomain.com Now wget works fine from the local machine to that domain. However when I restart Apache that domain no longer works. Here is the config for that site in /etc/apache2/sites-available NameVirtualHost XX.XX.XX.45:80 <VirtualHost XX.XX.XX.45:80> ServerName admin.somedomain.com DocumentRoot /var/www/admin.somedomain.com/ <Directory "/var/www/admin.somedomain.com"> allowoverride all Options Indexes order deny,allow allow from all </Directory> ErrorLog /var/log/apache2/admin.somedomain.com-error_log CustomLog /var/log/apache2/admin.somedomain.com-access_log combined </VirtualHost> It just goes to the default site config showing "It Works". If I take out that setting in /etc/hosts and restart apache the website at that domain works fine again. Can anyone point me in the right direction here? Thanks

  Read the article

• Question regarding the SELinux type enforcement file

  - by Luke Bibby

  In my SElinux te file, I define two new types called voice_t and data_t which certain directories will be classified in the fc file (/data/ will be of type data_t and /voice/ will be of type voice_t). I would like the one SELinux policy to be used for all servers in my network, but, some servers will log VoIP data and other servers will be used to log IP data. I only want the voice_t type to be defined on some servers and data_t to be defined on the others - is this possible? I have tried using an if statement with a boolean expression, and then defining the type when the condition is true but this does not seem to work (it tells me there is a syntax error at 'type data_t'' or 'type voice_t;'). Example: if (data_logger) { type data_t; } else { type voice_t; } Any help would be greatly appreciated. Cheers, Luke

  Read the article

• Broadcom NIC Teaming with Hyper-V R2

  - by Brian McCleary

  I have read a few contradictory articles regarding support or at least configuration with teaming of Broadcom NIC's and Hyper-V. I have a pair of Dell R805's with 4 Broadcom 5708 NIC's in them. I have teamed them up (one team for public connections and one for private connections) and I have installed Hyper-V. I am getting some intermittent connection issues though and I'm concerned that it might be due to the teaming. Basically I am wondering if anyone has successfully setup NIC teaming in the parent partition and used the teamed adapters through the Hyper-V switch. If so, what is the configuration/proper steps that you used to configure this. I have the server running Windows Server 2008 R2. Right now the server is in test mode, but my concern is that we won't see any issues until we move it into production and get some heavy traffic on the ports.

  Read the article

• Wildcard DNS, VirtualHosts on apache2, 404 for unused subdomains

  - by niel

  On an Apache2 server linked to by a DNS that includes a wildcard entry, e.g. *.example.com, subdomains that are not defined as ServerNames in any VirtualHosts point to the first defined VirtualHost, in my example this is 000-default. My Question:How would one get unused subdomains (subdomains not used in any virtualhosts) to return a 404 error to the requesting client? This must preferably show in server logs as a 404 as well. I have looked into the following possibilities: Redirecting any invalid subdomain to the home page or some other page.The problem with this method is, when someone links to your site as this.company.sucks.example.com, the client will see your home page or in my case 000-default if I do not redirect. Thanks, to Mike for pointing this out. (regex for "suck", etc definately not an option) Let the default VirtualHost point to a non-existent directory.Apache does not like this one bit, warning with every reload. Beyond the warning, everything seems fine. This seems like a hack. Does this seem like a problem (however small) to anyone? Point the default VirtualHost to a folder where the index.php is forbidden, thus creating a 403 status code.This is confusing and makes things like the following overly complicated: Say, for example, you use a subdomain per user (a big reason to use wildcard DNS, apparently), and users have the ability to view each others profiles at username.example.com. This solution is confusing to the user and completely not what I want to do. My ideal sollution will let the user know there is nothing to view at the url he entered. Preferably with a 404 and an error log entry for the address entered (not some other address). Any help would be greatly appreciated!

  Read the article

• Which file system to use for portable hard drive shared among different operating systems?

  - by Jonathon Watney

  Something similar has been asked already but my criteria is a little different. I need to share a portable hard drive (USB/Firewire) between Mac OSX, Linux and Windows XP systems where the files being shared are sometimes 4GB. Is there a file system that is available out of the box on all these operating systems that support this and allows read/write access? If not, what's the next best solution in terms of installing additional software on these operating systems?

  Read the article

• Command to execute another command while replaying the command on STDOUT

  - by hakre

  It's not easy to formulate the question properly, maybe it helps when I describe what I'd like to do. I want to execute a command and pipe it's output into a tool called pastebinit which uploads the STDOUT output to pastebin. That works very well, however I would like to send the command itself on top of it but w/o typing it a second time. Is there some command I can launch "my command" with that will Print "my command" on STDOUT Executes "my command" I have the feeling that something like that exists but as hard as it is to formulate such a question properly, I was not able to dig it up with google so far.

  Read the article

• Exchange 2003 Outlook Anywhere - Changed certificate, not working

  - by JohnyD

  I have a single Exchange 2003 installation which for the past 2 years has been set up for Outlook Anywhere access by means of a self-signed certificate. Just this past week I updated that certificate to a Go Daddy wildcard certificate to allow for use of our web services over https. I've updated the web listener on our ISA 2006 firewall and I can successfully use our services over https. However, my Outlook Anywhere access is now not functioning. I've installed the new wildcard certificate on my XP notebook into the Trusted Root Certificate Store but I keep getting prompted that the password is incorrect. To make things even more confusing I also have OWA set up and this works fine with the new certificate. Any ideas as to what I'm doing wrong?

  Read the article

• Nagios: NRPE: Unable to read output, Can't find the reason, can you?

  - by Itai Ganot

  I have a Nagios server and a monitored server. On the monitored server: [root@Monitored ~]# netstat -an |grep :5666 tcp 0 0 0.0.0.0:5666 0.0.0.0:* LISTEN [root@Monitored ~]# locate check_kvm /usr/lib64/nagios/plugins/check_kvm [root@Monitored ~]# /usr/lib64/nagios/plugins/check_kvm -H localhost hosts:3 OK:3 WARN:0 CRIT:0 - ab2c7:running alpweb5:running istaweb5:running [root@Monitored ~]# /usr/lib64/nagios/plugins/check_nrpe -H localhost -c check_kvm NRPE: Unable to read output [root@Monitored ~]# /usr/lib64/nagios/plugins/check_nrpe -H localhost NRPE v2.14 [root@Monitored ~]# ps -ef |grep nrpe nagios 21178 1 0 16:11 ? 00:00:00 /usr/sbin/nrpe -c /etc/nagios/nrpe.cfg -d [root@Monitored ~]# On the Nagios server: [root@Nagios ~]# /usr/lib64/nagios/plugins/check_nrpe -H 1.1.1.159 -c check_kvm NRPE: Unable to read output [root@Nagios ~]# /usr/lib64/nagios/plugins/check_nrpe -H 1.1.1.159 NRPE v2.14 [root@Nagios ~]# When I check another server in the network using the same command it works: [root@Nagios ~]# /usr/lib64/nagios/plugins/check_nrpe -H 1.1.1.80 -c check_kvm hosts:4 OK:4 WARN:0 CRIT:0 - karmisoft:running ab2c4:running kidumim1:running travel2gether1:running [root@Nagios ~]# Running the check locally using Nagios account: [root@Monitored ~]# su - nagios -bash-4.1$ /usr/lib64/nagios/plugins/check_kvm hosts:3 OK:3 WARN:0 CRIT:0 - ab2c7:running alpweb5:running istaweb5:running -bash-4.1$ Running the check remotely from the Nagios server using Nagios account: -bash-4.1$ /usr/lib64/nagios/plugins/check_nrpe -H 1.1.1.159 -c check_kvm NRPE: Unable to read output -bash-4.1$ /usr/lib64/nagios/plugins/check_nrpe -H 1.1.1.159 NRPE v2.14 -bash-4.1$ Running the same check_kvm against a different server in the network using Nagios account: -bash-4.1$ /usr/lib64/nagios/plugins/check_nrpe -H 1.1.1.80 -c check_kvm hosts:4 OK:4 WARN:0 CRIT:0 - karmisoft:running ab2c4:running kidumim1:running travel2gether1:running -bash-4.1$ Permissions: -rwxr-xr-x. 1 root root 4684 2013-10-14 17:14 nrpe.cfg (aka /etc/nagios/nrpe.cfg) drwxrwxr-x. 3 nagios nagios 4096 2013-10-15 03:38 plugins (aka /usr/lib64/nagios/plugins) /etc/sudoers: [root@Monitored ~]# grep -i requiretty /etc/sudoers #Defaults requiretty iptables/selinux: [root@Monitored xinetd.d]# service iptables status iptables: Firewall is not running. [root@Monitored xinetd.d]# service ip6tables status ip6tables: Firewall is not running. [root@Monitored xinetd.d]# grep disable /etc/selinux/config # disabled - No SELinux policy is loaded. SELINUX=disabled [root@Monitored xinetd.d]# The command in /etc/nagios/nrpe.cfg is: [root@Monitored ~]# grep kvm /etc/nagios/nrpe.cfg command[check_kvm]=sudo /usr/lib64/nagios/plugins/check_kvm and the nagios user is added on /etc/sudoers: nagios ALL=(ALL) NOPASSWD:/usr/lib64/nagios/plugins/check_kvm nagios ALL=(ALL) NOPASSWD:/usr/lib64/nagios/plugins/check_nrpe The check_kvm is a shell script, looks like that: #!/bin/sh LIST=$(virsh list --all | sed '1,2d' | sed '/^$/d'| awk '{print $2":"$3}') if [ ! "$LIST" ]; then EXITVAL=3 #Status 3 = UNKNOWN (orange) echo "Unknown guests" exit $EXITVAL fi OK=0 WARN=0 CRIT=0 NUM=0 for host in $(echo $LIST) do name=$(echo $host | awk -F: '{print $1}') state=$(echo $host | awk -F: '{print $2}') NUM=$(expr $NUM + 1) case "$state" in running|blocked) OK=$(expr $OK + 1) ;; paused) WARN=$(expr $WARN + 1) ;; shutdown|shut*|crashed) CRIT=$(expr $CRIT + 1) ;; *) CRIT=$(expr $CRIT + 1) ;; esac done if [ "$NUM" -eq "$OK" ]; then EXITVAL=0 #Status 0 = OK (green) fi if [ "$WARN" -gt 0 ]; then EXITVAL=1 #Status 1 = WARNING (yellow) fi if [ "$CRIT" -gt 0 ]; then EXITVAL=2 #Status 2 = CRITICAL (red) fi echo hosts:$NUM OK:$OK WARN:$WARN CRIT:$CRIT - $LIST exit $EXITVAL Edit (10/22/13): Following all that, I am now able to get some response from the script: [root@Monitored ~]# /usr/lib64/nagios/plugins/check_nrpe -H localhost -c check_kvm Unknown guests [root@Monitored ~]# /usr/lib64/nagios/plugins/check_nrpe -H localhost NRPE v2.14 [root@Monitored ~]# /usr/lib64/nagios/plugins/check_kvm hosts:3 OK:3 WARN:0 CRIT:0 - ab2c7:running alpweb5:running istaweb5:running [root@Monitored ~]# su - nagios -bash-4.1$ /usr/lib64/nagios/plugins/check_kvm hosts:3 OK:3 WARN:0 CRIT:0 - ab2c7:running alpweb5:running istaweb5:running -bash-4.1$ /usr/lib64/nagios/plugins/check_nrpe -H localhost -c check_kvm Unknown guests -bash-4.1$ /usr/lib64/nagios/plugins/check_nrpe -H localhost NRPE v2.14 It seems like the problem is some how related to the check_nrpe command or something which is related to the nrpe installation on the server.

  Read the article

• How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

  - by Dmitri Toubelis

  I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

  Read the article

• puppet cert mismatch in ec2

  - by Stick

  I'm setting up a puppetmaster (2.7.6) in ec2 via gems (on rhel6) and I'm running into problems with the cert names and getting the master able to talk to itself. my puppet.conf looks like this: [main] logdir = /var/log/puppet rundir = /var/run/puppet vardir = /var/lib/puppet ssldir = $vardir/ssl pluginsync = true environment = production report = true certname = master When I start the puppetmaster process the ssl directory looks like: ssl/private_keys/master.pem ssl/crl.pem ssl/public_keys/master.pem ssl/ca/ca_crl.pem ssl/ca/signed/master.pem ssl/ca/ca_crt.pem ssl/ca/ca_pub.pem ssl/ca/ca_key.pem ssl/certs/ca.pem ssl/certs/master.pem I have an /etc/hosts entry on the box to point the 'puppet' hostname to localhost so that I don't have to change the 'server' option. When I run the agent I get the following: # puppet agent --test info: Retrieving plugin err: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Server hostname 'puppet' did not match server certificate; expected master err: /File[/var/lib/puppet/lib]: Could not evaluate: Server hostname 'puppet' did not match server certificate; expected master Could not retrieve file metadata for puppet://puppet/plugins: Server hostname 'puppet' did not match server certificate; expected master err: Could not retrieve catalog from remote server: Server hostname 'puppet' did not match server certificate; expected master warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run err: Could not send report: Server hostname 'puppet' did not match server certificate; expected master If I specify the certname as the server (with corresponding hosts entry) I get: # puppet agent --test --server master info: Retrieving plugin err: /File[/var/lib/puppet/lib]: Could not evaluate: Could not retrieve information from environment production source(s) puppet://master/plugins info: Caching catalog for master info: Applying configuration version '1321805956' notice: Finished catalog run in 0.05 seconds Which is success of a sort, that source error will bite me later when I'm applying manifests. I've tried a couple of other variations with using the ec2 private hostname and gotten mixed results. I'd like to avoid setting server = 'x' and use dns/hosts to control what 'puppet' resolves to in order to decide which server (plays easier with availability zones, etc)

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >