Search Results

Search found 35571 results on 1423 pages for 'sql developer'.

Page 168/1423 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • SQL Server 2008 Restore hangs on 100%

    - by CL4NCY
    Hi, I have backed up a large database from SQL 2005 and am trying to restore it to a SQL 2008 database. It seems to work ok until it gets to 100% when it hangs indefinitely. I've managed to restore smaller databases to this server ok. Any ideas?

    Read the article

  • SQL Server Issue: Could not allocate space for object ... primary filegroup is full

    - by Luke
    Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

    Read the article

  • Oracle ATG Web Commerce 10 Implementation Developer Boot Camp - Reading (UK) - October 1-12, 2012

    - by Richard Lefebvre
    REGISTER NOW: Oracle ATG Web Commerce 10 Implementation Developer Boot Camp Reading, UK, October 1-12, 2012! OPN invites you to join us for a 10-day implementation bootcamp on Oracle ATG Web Commerce in Reading, UK from October 1-12, 2012.This 10-day boot camp is designed to provide partners with hands-on experience and technical training to successfully build and deploy Oracle ATG Web Commerce 10 Applications. This particular boot camp is focused on helping partners develop the essential skills needed to implement every aspect of an ATG Commerce Application from scratch, (not CRS-based), with a specific goal of enabling experienced Java/J2EE developers with a path towards becoming functional, effective, and contributing members of an ATG implementation team. Built for both new and experienced ATG developers alike, the collaborative nature of this program and its exercises, have proven to be highly effective and extremely valuable in learning the best practices for implementing ATG solutions. Though not required, this bootcamp provides a structured path to earning a Certified Oracle ATG Web Commerce 10 Specialization! What Is Covered: This boot camp is for Application Developers and Software Architects wanting to gain valuable insight into ATG application development best practices, as well as relevant and applicable implementation experience on projects modeled after four of the most common types of applications built on the ATG platform. The following learning objectives are all critical, and are of equal priority in enabling this role to succeed. This learning boot camp will help with: Building a basic functional transaction-ready ATG Web Commerce 10 Application. Utilizing ATG’s platform features such as scenarios, slots, targeters, user profiles and segments, to create a personalized user experience. Building Nucleus components to support and/or extend application functionality. Understanding the intricacies of ATG order checkout and fulfillment. Specifying, designing and implementing new commerce features in ATG 10. Building a functional commerce application modeled after four of the most common types of applications built on the ATG platform, within an agile-based project team environment and under simulated real-world project conditions. Duration: The Oracle ATG Web Commerce 10 Implementation Developer Boot Camp is an instructor-led workshop spanning 10 days. Audience: Application Developers Software Architects Prerequisite Training and Environment Requirements: Programming and Markup Experience with Java J2EE, JavaScript, XML, HTML and CSS Completion of Oracle ATG Web Commerce 10 Implementation Specialist Development Guided Learning Path modules Participants will be required to bring their own laptop that meets the minimum specifications:   64-bit PC and OS (e.g. Windows 7 64-bit) 4GB RAM or more 40GB Hard Disk Space Laptops will require access to the Internet through Remote Desktop via Windows. Agenda Topics: Week 1 – Day 1 through 5 Build a Basic Commerce Application In week one of the boot camp training, we will apply knowledge learned from the ATG Web Commerce 10 Implementation Developer Guided Learning Path modules, towards building a basic transaction-ready commerce application. There will be little to no lectures delivered in this boot camp, as developers will be fully engaged in ATG Application Development activities and best practices. Developers will work independently on the following lab assignments from day's 1 through 5: Lab Assignments  1 Environment Setup 2 Build a dynamic Home Page 3 Site Authentication 4 Build Customer Registration 5 Display Top Level Categories 6 Display Product Sub-Categories 7 Display Product List Page 8 Display Product Detail Page 9 ATG Inventory 10 Build “Add to Cart” Functionality 11 Build Shopping Cart 12 Build Checkout Page  13 Build Checkout Review Page 14 Create an Order and Build Order Confirmation Page 15 Implement Slots and Targeters for Personalization 16 Implement Pricing and Promotions 17 Order Fulfillment Back to top Week 2 – Day 6 through 10 Team-based Case Project In the second week of the boot camp training, participants will be asked to join a project team that will select a case project for the team to implement. Teams will be able to choose from four of the most common application types developed and deployed on the ATG platform. They are as follows: Hard goods with physical fulfillment, Soft goods with electronic fulfillment, a Service or subscription case example, a Course/Event registration case example. Team projects will have approximately 160 hours of use cases/stories for each team to build (40 hours per developer). Each day's Use Cases/Stories will build upon the prior day's work, and therefore must be fully completed at the end of each day. Please note that this boot camp intends to simulate real-world project conditions, and as such will likely require the need for project teams to possibly work beyond normal business hours. To promote further collaboration and group learning, each team will be asked to present their work and share the methodologies and solutions that they've applied to their cases at the end of each day. Location: Oracle Reading CVC TPC510 Room: Wraysbury Reading, UK 9:00 AM – 5:00 PM  Registration Fee (10 Days): US $3,375 Please click on the following link to REGISTER or  visit the Oracle ATG Web Commerce 10 Implementation Developer Boot Camp page for more information. Questions: Patrick Ty Partner Enablement, Oracle Commerce Phone: 310.343.7687 Mobile: 310.633.1013 Email: [email protected]

    Read the article

  • What resources will help me understand the data model for QC 10.0 in order to write my SQL queries?

    - by srihari
    I am a fresher in Quality Center 10.0 HP software testing tool. As per my understanding in order to generate reports from QC and to troubleshoot the scenarios, we need to write SQL queries in the QC back end database. In my case it is SQL db. I downloaded the database reference help file but I could not understand from where I can start. It just gave the table name and its information. For a starter like me are there any online tutorials or helpful websites,hands on exercises,scenario's where I can better understand how to write queries for the QC data model? I am very confident about the SQL coding itself, what I want to know is how to query on the QC database tables based on the scenarios that occur in QC tool. Please suggest. Thanks, Srihari

    Read the article

  • Is it more difficult to upgrade your certification from SQL Server 2008 to 2012 than to get it from scratch?

    - by Diego
    I was wondering about the new MCSA certification on SQL 2012 and how it seems to be more difficult to upgrade your certification from 2008 to 2012 than to get the 2012 from scratch. Reason I think that is true is because anyone with any MCTS SQL Server 2008 certification can upgrade it to a MCSA 2012 by passing 2 tests (457 and 458). If you try to get it from scratch, you need to pass 3 tests (461, 462 and 463 - which are pretty much the same as 432, 433 and 448 for SQL 2008). But the thing is, even though its one test less to upgrade, all the skills necessary to pass 461, 462 and 463 are squeezed on 457 and 458 so, it seems easier to get from scratch than upgrade. Any thoughts?

    Read the article

  • MySQL vs. SQL Server Go daddy, What is the difference bewteen hosted DB and App_Data Db.

    - by Nate Gates
    I'm using Goddady for site hosting, and I'm currently using MySQL, because there are less limits on size,etc. My question is what is the difference between using a hosted Godaddy Db such as MySQL vs. creating a SQL Serverdatabase in the the App_Data folder? My guess is security? Would it be a bad idea to use a SQL ServerDB thats located in the App_Data folder? Additional Well I am able to create a .mdf (SQL Server DB file) in the App_Data folder, but I'm really unsure if should use that or not, If I did use it it would simplify using some of the Microsoft tools. Like I said my guess is that it would be less secure, but I don't really know. I know I have a 10gb, file system limit, so I'm assuming my db would have to share that space.

    Read the article

  • Interview with Geoff Bones, developer on SQL Storage Compress

    - by red(at)work
    How did you come to be working at Red Gate? I've been working at Red Gate for nine months; before that I had been at a multinational engineering company. A number of my colleagues had left to work at Red Gate and spoke very highly of it, but I was happy in my role and thought, 'It can't be that great there, surely? They'll be back!' Then one day I visited to catch up them over lunch in the Red Gate canteen. I was so impressed with what I found there, that, three days later, I'd applied for a role as a developer. And how did you get into software development? My first job out of university was working as a systems programmer on IBM mainframes. This was quite a while ago: there was a lot of assembler and loading programs from tape drives and that kind of stuff. I learned a lot about how computers work, and this stood me in good stead when I moved over the development in the 90s. What's the best thing about working as a developer at Red Gate? Where should I start? One of the great things as a developer at Red Gate is the useful feedback and close contact we have with the people who use our products, either directly at trade shows and other events or through information coming through the product managers. The company's whole ethos is built around assisting the user, and this is in big contrast to my previous development roles. We aim to produce tools that people really want to use, that they enjoy using, and, as a developer, this is a great thing to aim for and a great feeling when we get it right. At Red Gate we also try to cut out the things that distract and stop us doing our jobs. As a developer, this means that I can focus on the code and the product I'm working on, knowing that others are doing a first-class job of making sure that the builds are running smoothly and that I'm getting great feedback from the testers. We keep our process light and effective, as we want to produce great software more than we want to produce great audit trails. Tell us a bit about the products you are currently working on. You mean HyperBac? First let me explain a bit about what HyperBac is. At heart it's a compression and encryption technology, but with a few added features that open up a wealth of really exciting possibilities. Right now we have the HyperBac technology in just three products: SQL HyperBac, SQL Virtual Restore and SQL Storage Compress, but we're only starting to develop what it can do. My personal favourite is SQL Virtual Restore; for example, I love the way you can use it to run independent test databases that are all backed by a single compressed backup. I don't think the market yet realises the kind of things you do once you are using these products. On the other hand, the benefits of SQL Storage Compress are straightforward: run your databases but use only 20% of the disk space. Databases are getting larger and larger, and, as they do, so does your ROI. What's a typical day for you? My days are pretty varied. We have our daily team stand-up meeting and then sometimes I will work alone on a current issue, or I'll be pair programming with one of my colleagues. From time to time we give half a day up to future planning with the team, when we look at the long and short term aims for the product and working out the development priorities. I also get to go to conferences and events, which is unusual for a development role and gives me the chance to meet and talk to our customers directly. Have you noticed anything different about developing tools for DBAs rather than other IT kinds of user? It seems to me that DBAs are quite independent minded; they know exactly what the problem they are facing is, and often have a solution in mind before they begin to look for what's on the market. This means that they're likely to cherry-pick tools from a range of vendors, picking the ones that are the best fit for them and that disrupt their environments the least. When I've met with DBAs, I've often been very impressed at their ability to summarise their set up, the issues, the obstacles they face when implementing a tool and their plans for their environment. It's easier to develop products for this audience as they give such a detailed overview of their needs, and I feel I understand their problems.

    Read the article

  • MySQL vs. SQL Server Go daddy, What is the difference bewteen hosted DB and App_Data Db

    - by Nate Gates
    I'm using Goddady for site hosting, and I'm currently using MySQL, because there are less limits on size,etc. My question is what is the difference between using a hosted Godaddy Db such as MySQL vs. creating a SQL Serverdatabase in the the App_Data folder? My guess is security? Would it be a bad idea to use a SQL ServerDB thats located in the App_Data folder? Additional Well I am able to create a .mdf (SQL Server DB file) in the App_Data folder, but I'm really unsure if should use that or not, If I did use it it would simplify using some of the Microsoft tools. Like I said my guess is that it would be less secure, but I don't really know. I know I have a 10gb, file system limit, so I'm assuming my db would have to share that space.

    Read the article

  • MySQL vs. SQL Server GoDaddy, What is the difference between hosted DB and App_Data Db

    - by Nate Gates
    I'm using GoDdady for site hosting, and I'm currently using MySQL, because there are less limits on size,etc. My question is what is the difference between using a hosted GoDaddy Db such as MySQL vs. creating a SQL Server database in the the App_Data folder? My guess is security? Would it be a bad idea to use a SQL ServerDB that's located in the App_Data folder? Additional Well I am able to create a .mdf (SQL Server DB file) in the App_Data folder, but I'm really unsure if should use that or not, If I did use it it would simplify using some of the Microsoft tools. Like I said my guess is that it would be less secure, but I don't really know. I know I have a 10gb, file system limit, so I'm assuming my db would have to share that space.

    Read the article

  • Is executing SQL through a WebService a really bad idea?

    - by Kyle
    Typically when creating a simple tool or something that has to use a database, I go through the fairly long process of first creating a webservice that connects to a database then creating methods on this webservice that do all the type of queries I need.. methods like List<Users> GetUsers() { ... } User GetUserByID(int id) { ... } //More Get/Update/Add/Delete methods Is it terrible design to simply make the webservice as secure as I can (not quite sure the way to do something like this yet) and just make a couple methods like this SqlDataReader RunQuery(string sql) { ... } void RunNonQuery(string sql) { ... } I would sorta be like exposing my database to the internet I suppose, which sounds bad but I'm not sure. I just feel like I waste so much time running everything through this webservice, there has to be a quicker yet safe way that doesn't involve my application connecting directly to the database (the application can't connect directly to database because the database isn't open to any connections but localhost, and where the appliction resides the standard sql ports are blocked anyway) Especially when I just need to run a few simple queries

    Read the article

  • What is the scope of CONTEXT_INFO in SQL Server?

    - by JasonS
    I am using CONTEXT_INFO to pass a username to a delete trigger for the purposes of an audit/history table. I'm trying to understand the scope of CONTEXT_INFO and if I am creating a potential race condition. Each of my database tables has a stored proc to handle deletes. The delete stored proc takes userId as an parameter, and sets CONTEXT_INFO to the userId. My delete trigger then grabs the CONTEXT_INFO and uses that to update an audit table that indicates who deleted the row(s). The question is, if two deletes sprocs from different users are executing at the same time, can CONTEXT_INFO set in one of the sprocs be consumed by the trigger fired by the other sproc? I've seen this article http://msdn.microsoft.com/en-us/library/ms189252.aspx but I'm not clear on the scope of sessions and batches in SQL Server which is key to the article being helpful! I'd post code, but short on time at the moment. I'll edit later if this isn't clear enough. Thanks in advance for any help.

    Read the article

  • Character set issues with Oracle Gateways, SQL Server, and Application Express

    - by Brian Deterling
    I am migrating data from a Oracle on VMS that accesses data on SQL Server using heterogeneous services (over ODBC) to Oracle on AIX accessing the SQL Server via Oracle Gateways (dg4msql). The Oracle VMS database used the WE8ISO8859P1 character set. The AIX database uses WE8MSWIN1252. The SQL Server database uses "Latin1-General, case-insensitive, accent-sensitive, kanatype-insensitive, width-insensitive for Unicode Data, SQL Server Sort Order 52 on Code Page 1252 for non-Unicode Data" according to sp_helpsort. The SQL Server databases uses nchar/nvarchar or all string columns. In Application Express, extra characters are appearing in some cases, for example 123 shows up as %001%002%003. In sqlplus, things look ok but if I use Oracle functions like initcap, I see what appear as spaces between each letter of a string when I query the sql server database (using a database link). This did not occur under the old configuration. I'm assuming the issue is that an nchar has extra bytes in it and the character set in Oracle can't convert it. It appears that the ODBC solution didn't support nchars so must have just cast them back to char and they showed up ok. I only need to view the sql server data so I'm open to any solution such as casting, but I haven't found anything that works. Any ideas on how to deal with this? Should I be using a different character set in Oracle and if so, does that apply to all schemas since I only care about one of them.

    Read the article

  • What is your best-practice advice on implementing SQL stored procedures (in a C# winforms applicatio

    - by JYelton
    I have read these very good questions on SO about SQL stored procedures: When should you use stored procedures? and Are Stored Procedures more efficient, in general, than inline statements on modern RDBMS’s? I am a beginner on integrating .NET/SQL though I have used basic SQL functionality for more than a decade in other environments. It's time to advance with regards to organization and deployment. I am using .NET C# 3.5, Visual Studio 2008 and SQL Server 2008; though this question can be regarded as language- and database- agnostic, meaning that it could easily apply to other environments that use stored procedures and a relational database. Given that I have an application with inline SQL queries, and I am interested in converting to stored procedures for organizational and performance purposes, what are your recommendations for doing so? Here are some additional questions in my mind related to this subject that may help shape the answers: Should I create the stored procedures in SQL using SQL Management Studio and simply re-create the database when it is installed for a client? Am I better off creating all of the stored procedures in my application, inside of a database initialization method? It seems logical to assume that creating stored procedures must follow the creation of tables in a new installation. My database initialization method creates new tables and inserts some default data. My plan is to create stored procedures following that step, but I am beginning to think there might be a better way to set up a database from scratch (such as in the installer of the program). Thoughts on this are appreciated. I have a variety of queries throughout the application. Some queries are incredibly simple (SELECT id FROM table) and others are extremely long and complex, performing several joins and accepting approximately 80 parameters. Should I replace all queries with stored procedures, or only those that might benefit from doing so? Finally, as this topic obviously requires some research and education, can you recommend an article, book, or tutorial that covers the nuances of using stored procedures instead of direct statements?

    Read the article

  • SQL Server, how to join a table in a "rotated" format (returning columns instead of rows)?

    - by Joshua Carmody
    Sorry for the lame title, my descriptive skills are poor today. In a nutshell, I have a query similar to the following: SELECT P.LAST_NAME, P.FIRST_NAME, D.DEMO_GROUP FROM PERSON P JOIN PERSON_DEMOGRAPHIC PD ON PD.PERSON_ID = P.PERSON_ID JOIN DEMOGRAPHIC D ON D.DEMOGRAPHIC_ID = PD.DEMOGRAPHIC_ID This returns output like this: LAST_NAME FIRST_NAME DEMO_GROUP --------------------------------------------- Johnson Bob Male Smith Jane Female Smith Jane Teacher Beeblebrox Zaphod Male Beeblebrox Zaphod Alien Beeblebrox Zaphid Politician I would prefer the output be similar to the following: LAST_NAME FIRST_NAME Male Female Teacher Alien Politician --------------------------------------------------------------------------------------------------------- Johnson Bob 1 0 0 0 0 Smith Jane 0 1 1 0 0 Beeblebrox Zaphod 1 0 0 1 1 The number of rows in the DEMOGRAPHIC table varies, so I can't say with certainty how many columns I need. The query needs to be flexible. Yes, it would be trivial to do this in code. But this query is one piece of a complicated set of stored procedures, views, and reporting services, many of which are outside my sphere of influence. I need to produce this output inside the database to avoid breaking the system. Any ideas? This is MS SQL Server 2005, by the way. Thanks.

    Read the article

  • Re-using aggregate level formulas in SQL - any good tactics?

    - by Cade Roux
    Imagine this case, but with a lot more component buckets and a lot more intermediates and outputs. Many of the intermediates are calculated at the detail level, but a few things are calculated at the aggregate level: DECLARE @Profitability AS TABLE ( Cust INT NOT NULL ,Category VARCHAR(10) NOT NULL ,Income DECIMAL(10, 2) NOT NULL ,Expense DECIMAL(10, 2) NOT NULL ) ; INSERT INTO @Profitability VALUES ( 1, 'Software', 100, 50 ) ; INSERT INTO @Profitability VALUES ( 2, 'Software', 100, 20 ) ; INSERT INTO @Profitability VALUES ( 3, 'Software', 100, 60 ) ; INSERT INTO @Profitability VALUES ( 4, 'Software', 500, 400 ) ; INSERT INTO @Profitability VALUES ( 5, 'Hardware', 1000, 550 ) ; INSERT INTO @Profitability VALUES ( 6, 'Hardware', 1000, 250 ) ; INSERT INTO @Profitability VALUES ( 7, 'Hardware', 1000, 700 ) ; INSERT INTO @Profitability VALUES ( 8, 'Hardware', 5000, 4500 ) ; SELECT Cust ,Profit = SUM(Income - Expense) ,Margin = SUM(Income - Expense) / SUM(Income) FROM @Profitability GROUP BY Cust SELECT Category ,Profit = SUM(Income - Expense) ,Margin = SUM(Income - Expense) / SUM(Income) FROM @Profitability GROUP BY Category SELECT Profit = SUM(Income - Expense) ,Margin = SUM(Income - Expense) / SUM(Income) FROM @Profitability Notice how the same formulae have to be used at the different aggregation levels. This results in code duplication. I have thought of using UDFs (either scalar or table valued with an OUTER APPLY, since many of the final results may share intermediates which have to be calculated at the aggregate level), but in my experience the scalar and multi-statement table-valued UDFs perform very poorly. Also thought about using more dynamic SQL and applying the formulas by name, basically. Any other tricks, techniques or tactics to keeping these kinds of formulae which need to be applied at different levels in sync and/or organized?

    Read the article

  • How do you concat multiple rows into one column in SQL Server?

    - by Jason
    I've searched high and low for the answer to this, but I can't figure it out. I'm relatively new to SQL Server and don't quite have the syntax down yet. I have this datastructure (simplified): Table "Users" | Table "Tags": UserID UserName | TagID UserID PhotoID 1 Bob | 1 1 1 2 Bill | 2 2 1 3 Jane | 3 3 1 4 Sam | 4 2 2 ----------------------------------------------------- Table "Photos": | Table "Albums": PhotoID UserID AlbumID | AlbumID UserID 1 1 1 | 1 1 2 1 1 | 2 3 3 1 1 | 3 2 4 3 2 | 5 3 2 | I'm looking for a way to get the all the photo info (easy) plus all the tags for that photo concatenated like CONCAT(username, ', ') AS Tags of course with the last comma removed. I'm having a bear of a time trying to do this. I've tried the method in this article but I get an error when I try to run the query saying that I can't use DECLARE statements... do you guys have any idea how this can be done? I'm using VS08 and whatever DB is installed in it (I normally use MySQL so I don't know what flavor of DB this really is... it's an .mdf file?)

    Read the article

  • broken SQL 2008 SP1 Web Edition (can not login with SSMS)

    - by gerryLowry
    Scenario: My installation of SQL Server 2008 Web Edition SP1 was working properly. Since I've recently joined Microsoft's Website Spark*, I removed SQL2008 and installed SQL 2008 again using my Website Spark edition and license from the MSDN download site. Next, I updated SQL 2008 to SP1 (this is required because I'm running Windows 2008 Server R2 Web edition). When I launch SSMS (SQL Server Management Studio), "User name" is "myhost\Administrator" and is greyed out so it can not be changed. When I installed my Website Spark version, I did not include "myhost\Administrator" when I was configuring SQL 2008 service accounts. Instead I created an administrator account "myhost\mySQLaccount". ERROR MESSAGE: Connect to Server (X) Cannot connect to (local) Additional information: Login failed for user 'myhost'Admistrator' (Microsoft SQL Server, Error: 18456) I tried to use the SQL Server Configuration Manager to correct this problem but could not find any useful way to fix this issue. How to I fix this problem? Connect to Server ... Server type: Database Engine Server name: (local) Authentication: Windows Authentication Please advise. Thank you. Gerry * http://www.microsoft.com/web/websitespark/default.aspx

    Read the article

  • Can I store SQL Server sort order in a variable?

    - by Steve Weet
    I have the following SQL within a stored procedure. Is there a way to remove the IF statement and pass the 'ASC'/'DESC' option as a variable? I know I could do the query a number of different ways, or return a table and sort it externally etc. I would just like to know if I can avoid duplicating the CASE statement. IF @sortOrder = 'Desc' BEGIN SELECT * FROM #t_results ORDER BY CASE WHEN @OrderBy = 'surname' THEN surname END DESC, CASE WHEN @OrderBy = 'forename' THEN forename END DESC, CASE WHEN @OrderBy = 'fullName' THEN fullName END DESC, CASE WHEN @OrderBy = 'userId' THEN userId END DESC, CASE WHEN @OrderBy = 'MobileNumber' THEN MSISDN END DESC, CASE WHEN @OrderBy = 'DeviceStatus' THEN DeviceStatus END DESC, CASE WHEN @OrderBy = 'LastPosition' THEN LastPosition END DESC, CASE WHEN @OrderBy = 'LastAlert' THEN LastAlert END DESC, CASE WHEN @OrderBy = 'LastCommunication' THEN LastCommunication END DESC, CASE WHEN @OrderBy = 'LastPreAlert' THEN LastPreAlert END DESC END ELSE BEGIN SELECT * FROM #t_results ORDER BY CASE WHEN @OrderBy = 'surname' THEN surname END DESC, CASE WHEN @OrderBy = 'forename' THEN forename END DESC, CASE WHEN @OrderBy = 'fullName' THEN fullName END DESC, CASE WHEN @OrderBy = 'userId' THEN userId END DESC, CASE WHEN @OrderBy = 'MobileNumber' THEN MSISDN END DESC, CASE WHEN @OrderBy = 'DeviceStatus' THEN DeviceStatus END DESC, CASE WHEN @OrderBy = 'LastPosition' THEN LastPosition END DESC, CASE WHEN @OrderBy = 'LastAlert' THEN LastAlert END DESC, CASE WHEN @OrderBy = 'LastCommunication' THEN LastCommunication END DESC, CASE WHEN @OrderBy = 'LastPreAlert' THEN LastPreAlert END DESC END END

    Read the article

  • Paramaterising SQL in SSIS

    - by Anonymouslemming
    Hi all, I'm trying to paramaterize some queries in SSIS. After some reading, it sounds like my best option is to create one variable that contains my base sql, another that contains my criteria and a final variable that is evaluated as an expression that includes both of these. I want to end up with an SQL query that is effectively UPDATE mytable set something='bar' where something_else='foo' So my first two variables have the scope of my package and are as follows: Name: BaseSQL Data Type: String Value: UPDATE mytable set something = 'bar' where something_else = Name: MyVariable Data Type: String Value: foo My third variable has a scope of the data flow task where I want to use this SQL and is as follows: Name: SQLQuery Data Type: String Value: @[User::BaseSQL] + "'" + @[User::MyVariable] + "'" EvaluateAsExpression: True In the OLE DB Source, I then choose my connection and 'SQL command from variable' and select User::SQLQuery from the dropdown box. The Variable Value window then displays the following: @[User::BaseSQL] + "'" + @[User::MyVariable] + "'" This is as desired, and would provide the output I want from my DB. The variable name dropdown also contains User::BaseSQL and User::MyVariable so I believe that my namespaces are correct. However, when I then click preview, I get the following error when configuring an OLE DB Source (using SQL command from variable): TITLE: Microsoft Visual Studio Error at Set runtime in DB [Set runtime in myDb DB [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E14 Description: "Statement(s) could not be prepared.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E14 Description: "Must declare the scalar variable "@".". (Microsoft Visual Studio) Can anyone advise what I'm missing or how I can resolve this please ? Thanks in advance!

    Read the article

  • How to have a where clause on an insert or an update in Linq to Sql?

    - by Kelsey
    I am trying to convert the following stored proc to a LinqToSql call (this is a simplied version of the SQL): INSERT INTO [MyTable] ([Name], [Value]) SELECT @name, @value WHERE NOT EXISTS(SELECT [Value] FROM [MyTable] WHERE [Value] = @value) The DB does not have a constraint on the field that is getting checked for so in this specific case the check needs to be made manually. Also there are many items constantly being inserted as well so I need to make sure that when this specific insert happens there is no dupe of the value field. My first hunch is to do the following: using (TransactionScope scope = new TransactionScope()) { if (Context.MyTables.SingleOrDefault(t => t.Value == in.Value) != null) { MyLinqModels.MyTable t = new MyLinqModels.MyTable() { Name = in.Name, Value = in.Value }; // Do some stuff in the transaction scope.Complete(); } } This is the first time I have really run into this scenario so I want to make sure I am going about it the right way. Does this seem correct or can anyone suggest a better way of going about it without having two seperate calls? Edit: I am running into a similar issue with an update: UPDATE [AnotherTable] SET [Code] = @code WHERE [ID] = @id AND [Code] IS NULL How would I do the same check with Linqtosql? I assume I need to do a get and then set all the values and submit but what if someone updates [Code] to something other than null from the time I do the get to when the update executes? Same problem as the insert...

    Read the article

  • Tell me SQL Server Full-Text searcher is crazy, not me.

    - by Ian Boyd
    i have some customers with a particular address that the user is searching for: 123 generic way There are 5 rows in the database that match: ResidentialAddress1 ============================= 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY i run a FT query to look for these rows. i'll show you each step as i add more criteria to the search: SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"123*"') ResidentialAddress1 ========================= 123 MAPLE STREET 12345 TEST 123 MINE STREET 123 GENERIC WAY 123 FAKE STREET ... (30 row(s) affected) Okay, so far so good, now adding the word "generic": SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"123*"') AND CONTAINS(Patrons.ResidentialAddress1, '"generic*"') ResidentialAddress1 ============================= 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY 123 GENERIC WAY (5 row(s) affected) Excellent. And now i'l add the final keyword that the user wants to make sure exists: SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"123*"') AND CONTAINS(Patrons.ResidentialAddress1, '"generic*"') AND CONTAINS(Patrons.ResidentialAddress1, '"way*"') ResidentialAddress1 ------------------------------ (0 row(s) affected) Huh? No rows? What if i query for just "way*": SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"way*"') ResidentialAddress1 ------------------------------ (0 row(s) affected) At first i thought that perhaps it's because of the *, and it's requiring that the root way have more characters after it. But that's not true: Searching for "123*" matches "123" Searching for "generic*" matches "generic" Books online says, The asterisk matches zero, one, or more characters What if i remove the * just for s&g: SELECT ResidentialAddress1 FROM Patrons WHERE CONTAINS(Patrons.ResidentialAddress1, '"way"') Server: Msg 7619, Level 16, State 1, Line 1 A clause of the query contained only ignored words. So one might think that you are just not allowed to even search for way, either alone, or as a root. But this isn't true either: SELECT * FROM Patrons WHERE CONTAINS(Patrons.*, '"way*"') AccountNumber FirstName Lastname ------------- --------- -------- 33589 JOHN WAYNE So sum up, the user is searching for rows that contain all the words: 123 generic way Which i, correctly, translate into the WHERE clauses: SELECT * FROM Patrons WHERE CONTAINS(Patrons.*, '"123*"') AND CONTAINS(Patrons.*, '"generic*"') AND CONTAINS(Patrons.*, '"way*"') which returns no rows. Tell me this just isn't going to work, that it's not my fault, and SQL Server is crazy. Note: i've emptied the FT index and rebuilt it.

    Read the article

  • How can I automatically generate sql update scripts when some data is updated ?

    - by Brann
    I'd like to automatically generate an update script each time a value is modified in my database. In other words, if a stored procedure, or a query, or whatever updates column a with value b in table c (which as a pk column (i,j...k), I want to generate this : update c set a=b where i=... and j=... and k=... and store it somewhere (for example as a raw string in a table). To complicate things, I want the script to be generated only if the update has been made by a specific user. Good news is that I've got a primary key defined for all my tables. I can see how to do this using a trigger, but I would need to generate specific triggers for each table, and to update them each and every-time my schema changes. I guess there are some built-in ways to do this as SQL server sometimes need to store this kind of things (while using transactional replication for example), but couldn't find anything so far ... any ideas ? I'm also interested in ways to automatically generate triggers (probably using triggers - meta triggers, huh? - since I will need to update triggers automatically when the schema change)

    Read the article

  • How can I manage a FIFO-queue in an database with SQL?

    - by Jonas
    I have two tables in my database, one for In and one for Out. They have two columns, Quantity and Price. How can I write a SQL-query that selects the correct price? In example: If I have 3 items in for 75 and then 3 items in for 80. Then I have two out for 75, and the third out should be for 75 (X) and the fourth out should be for 80 (Y). How can I write the price query for X and Y? They should use the price from the third and forth row. In example, is there any way to SELECT the third row in the In-table? I can not use auto_increment as identifier for i.e. "third" row, because the tables will contain post for other items too. The rows will not be deleted, they will be saved for accountability reasons. SELECT Price FROM In WHERE ...? NEW database design: +----+ | In | +----+------+-------+ | Supply_ID | Price | +-----------+-------+ | 1 | 75 | | 1 | 75 | | 1 | 75 | | 2 | 80 | | 2 | 80 | +-----------+-------+ +-----+ | Out | +-----+-------+-------+ | Delivery_ID | Price | +-------------+-------+ | 1 | 75 | | 1 | 75 | | 2 | X | <- ? | 3 | Y | <- ? +-------------+-------+ OLD database design: +----+ | In | +----+------+----------+-------+ | Supply_ID | Quantity | Price | +-----------+----------+-------+ | 1 | 3 | 75 | | 2 | 3 | 80 | +-----------+----------+-------+ +-----+ | Out | +-----+-------+----------+-------+ | Delivery_ID | Quantity | Price | +-------------+----------+-------+ | 1 | 2 | 75 | | 2 | 1 | X | <- ? | 3 | 1 | Y | <- ? +-------------+----------+-------+

    Read the article

  • How can manage a FIFO-queue in an database with SQL?

    - by Jonas
    I have two tables in my database, one for In and one for Out. They have two columns, Quantity and Price. How can I write a SQL-query that selects the correct price? In example: If I have 3 items in for 75 and then 3 items in for 80. Then I have two out for 75, and the third out should be for 75 (X) and the fourth out should be for 80 (Y). How can I write the price query for X and Y? They should use the price from the third and forth row. In example, is there any way to SELECT the third row in the In-table? I can not use auto_increment as identifier for i.e. "third" row, because the tables will contain post for other items too. The rows will not be deleted, they will be saved for accountability reasons. SELECT Price FROM In WHERE ...? NEW database design: +----+ | In | +----+------+-------+ | Supply_ID | Price | +-----------+-------+ | 1 | 75 | | 1 | 75 | | 1 | 75 | | 2 | 80 | | 2 | 80 | +-----------+-------+ +-----+ | Out | +-----+-------+-------+ | Delivery_ID | Price | +-------------+-------+ | 1 | 75 | | 1 | 75 | | 2 | X | <- ? | 3 | Y | <- ? +-------------+-------+ OLD database design: +----+ | In | +----+------+----------+-------+ | Supply_ID | Quantity | Price | +-----------+----------+-------+ | 1 | 3 | 75 | | 2 | 3 | 80 | +-----------+----------+-------+ +-----+ | Out | +-----+-------+----------+-------+ | Delivery_ID | Quantity | Price | +-------------+----------+-------+ | 1 | 2 | 75 | | 2 | 1 | X | <- ? | 3 | 1 | Y | <- ? +-------------+----------+-------+

    Read the article

  • Using Linq-To-SQL I'm getting some weird behavior doing text searches with the .Contains method. Loo

    - by Nate Bross
    I have a table, where I need to do a case insensitive search on a text field. If I run this query in LinqPad directly on my database, it works as expected Table.Where(tbl => tbl.Title.Contains("StringWithAnyCase")) // also, adding in the same constraints I'm using in my repository works in LinqPad // Table.Where(tbl => tbl.Title.Contains("StringWithAnyCase") && tbl.IsActive == true) In my application, I've got a repository which exposes IQueryable objects which does some initial filtering and it looks like this var dc = new MyDataContext(); public IQueryable<Table> GetAllTables() { var ret = dc.Tables.Where(t => t.IsActive == true); return ret; } In the controller (its an MVC app) I use code like this in an attempt to mimic the LinqPad query: var rpo = new RepositoryOfTable(); var tables = rpo.GetAllTables(); // for some reason, this does a CASE SENSITIVE search which is NOT what I want. tables = tables.Where(tbl => tbl.Title.Contains("StringWithAnyCase"); return View(tables); The column is defiend as an nvarchar(50) in SQL Server 2008. Any help or guidance is greatly appreciated!

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >