Search Results

Search found 4514 results on 181 pages for 'totally newbie'.

Page 168/181 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Recommended ASP.NET Shared Hosting

  - by coffeeaddict

  Ok, I have to admit I'm getting fed up with www.discountasp.net's pricing model and this annoyance has built up over the past 8 years or so. I've been with them for years and absolutely love them on the technical side, however it's getting ridiculously expensive for so little that you get. I mean here's my scenario: 1) I am running 2 SQL Server databases which costs me $10/ea per month so that's $20/month for 2 and I only get 500 mb disk space which is horrible 2) I am paying $10/mo just for the hosting itself which I only get 1 gig of disk space! I mean common! 3) I am simply running 2 small apps (Screwturn Wiki & Subtext Blog)...so I don't really care if it's up 99% or not, it's not worth paying a total of $300 just to keep these 2 apps running over discountasp.net Anyone else feel the same? Yes, I know they have great support, probably have great servers running behind this but in the end I really don't care as long as my site is up 95% or better. Yes, the hosting toolset rocks. But you know I bet you I can find a similar set somewhere else. I like how I can totally control IIS 7 at discountasp and I can control my own app pool etc. That's very powerful and essential. But anyone have any good alternatives to discountasp that gives me close to the same at a much more reasonable cost point? I mean http://www.m6.net/prices.aspx gives you 10 SQL Databases for $7 and 200 gigs disk space! I don't know about their tools or support but just looking at those numbers and some other hosts I've seen, I feel that discountasp.net is way out of line. They don't even offer any purchasing discounts such as it would be nice if my 2nd SQL Server is only $5/month not $10...stuff like this, to make it much more realistic and fair. Opinions (people who do have discountasp.net, people who have left them, or people who have another host they like)??? But geez $300 just to host a couple DBs and lightweight open source apps? Not worth the price they are charging. I'm almost at a price point that enables me to get a decent dedicated server! I really don't care about beta support. Not a big deal to me.

  Read the article

• How to use input type="tel" in a contact form

  - by user1678664

  PHP newbie here trying to use a simple contact form. The fields I have are: "Name", "Email", "Phone", and "Message". I am trying to figure out what to do with the "Phone" field – I want it to output to the same place that "Message" does, so that when the email is received it will output both the message and the phone number to the body of the email. How do I do this? if( isset( $_POST['submit'] ) ) : wp_mail( get_option( 'admin_email' ), 'Website Contact Form', ( isset($_POST['message'] ) ? $_POST['message'] : '(blank)' ), 'From: ' . ( isset( $_POST['from_name'] ) ? $_POST['from_name'] : 'Website Contact Form' ) . ' <' . ( isset( $_POST['from_email'] ) ? $_POST['from_email'] : get_option( 'admin_email' ) ). '>' . "\r\n" ); $output = '<p>Thank you! Your message has been sent.</p>'; else : $output = ' <form action="" method="post"><ul> <li> <label for="from_name">Name</label> <input type="text" name="from_name" id="from_name" /> </li> <li> <label for="from_email">Email</label> <input type="email" name="from_email" id="from_email" /> </li> <li> <label for="from_tel">Phone</label> <input type="tel" name="from_tel" id="from_tel" /> </li> <li> <textarea name="message" id="message"></textarea> </li> <li class="submit"> <input name="submit" type="submit" value="Say Hello!" /> </li> </ul></form>'; endif; return $output;

  Read the article

• Clicking the TableView leads you to the another View

  - by lakesh

  I am a newbie to iPhone development. I have already created an UITableView. I have wired everything up and included the delegate and datasource. However, instead of adding a detail view accessory by using UITableViewCellAccessoryDetailClosureButton, I would like to click the UITableViewCell and it should lead to another view with more details about the UITableViewCell. My view controller looks like this: ViewController.h #import <UIKit/UIKit.h> @interface ViewController : UIViewController<UITableViewDataSource,UITableViewDelegate>{ NSArray *tableItems; NSArray *images; } @property (nonatomic,retain) NSArray *tableItems; @property (nonatomic,retain) NSArray *images; @end ViewController.m #import "ViewController.h" #import <QuartzCore/QuartzCore.h> @interface ViewController () @end @implementation ViewController @synthesize tableItems,images; - (void)viewDidLoad { [super viewDidLoad]; tableItems = [[NSArray alloc] initWithObjects:@"Item1",@"Item2",@"Item3",nil]; images = [[NSArray alloc] initWithObjects:[UIImage imageNamed:@"clock.png"],[UIImage imageNamed:@"eye.png"],[UIImage imageNamed:@"target.png"],nil]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{ return tableItems.count; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{ //Step 1:Check whether if we can reuse a cell UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"cell"]; //If there are no new cells to reuse,create a new one if(cell == nil) { cell = [[UITableViewCell alloc] initWithStyle:(UITableViewCellStyleDefault) reuseIdentifier:@"cell"]; UIView *v = [[UIView alloc] init]; v.backgroundColor = [UIColor redColor]; cell.selectedBackgroundView = v; //changing the radius of the corners //cell.layer.cornerRadius = 10; } //Set the image in the row cell.imageView.image = [images objectAtIndex:indexPath.row]; //Step 3: Set the cell text content cell.textLabel.text = [tableItems objectAtIndex:indexPath.row]; //Step 4: Return the row return cell; } - (void)tableView:(UITableView *)tableView willDisplayCell:(UITableViewCell *)cell forRowAtIndexPath:(NSIndexPath *)indexPath{ cell.backgroundColor = [ UIColor greenColor]; } @end Need some guidance on this.. Thanks.. Please pardon me if this is a stupid question.

  Read the article

• How do I connect multiple sortable lists to each other in jQuery UI?

  - by Abs

  I'm new to jQuery, and I'm totally struggling with using jQuery UI's sortable. I'm trying to put together a page to facilitate grouping and ordering of items. My page has a list of groups, and each group contains a list of items. I want to allow users to be able to do the following: 1. Reorder the groups 2. Reorder the items within the groups 3. Move the items between the groups The first two requirements are no problem. I'm able to sort them just fine. The problem comes in with the third requirement. I just can't connect those lists to each other. Some code might help. Here's the markup. <ul id="groupsList" class="groupsList"> <li id="group1" class="group">Group 1 <ul id="groupItems1" class="itemsList"> <li id="item1-1" class="item">Item 1.1</li> <li id="item1-2" class="item">Item 1.2</li> </ul> </li> <li id="group2" class="group">Group 2 <ul id="groupItems2" class="itemsList"> <li id="item2-1" class="item">Item 2.1</li> <li id="item2-2" class="item">Item 2.2</li> </ul> </li> <li id="group3" class="group">Group 3 <ul id="groupItems3" class="itemsList"> <li id="item3-1" class="item">Item 3.1</li> <li id="item3-2" class="item">Item 3.2</li> </ul> </li> </ul> I was able to sort the lists by putting $('#groupsList').sortable({}); and $('.itemsList').sortable({}); in the document ready function. I tried using the connectWith option for sortable to make it work, but I failed spectacularly. What I'd like to do is have the every groupItemsX list connected to every groupItemsX list but itself. How should I do that?

  Read the article

• Should I create a unique clustered index, or non-unique clustered index on this SQL 2005 table?

  - by Bremer

  I have a table storing millions of rows. It looks something like this: Table_Docs ID, Bigint (Identity col) OutputFileID, int Sequence, int …(many other fields) We find ourselves in a situation where the developer who designed it made the OutputFileID the clustered index. It is not unique. There can be thousands of records with this ID. It has no benefit to any processes using this table, so we plan to remove it. The question, is what to change it to… I have two candidates, the ID identity column is a natural choice. However, we have a process which does a lot of update commands on this table, and it uses the Sequence to do so. The Sequence is non-unique. Most records only contain one, but about 20% can have two or more records with the same Sequence. The INSERT app is a VB6 piece of crud throwing thousands insert commands at the table. The Inserted values are never in any particular order. So the Sequence of one insert may be 12345, and the next could be 12245. I know that this could cause SQL to move a lot of data to keep the clustered index in order. However, the Sequence of the inserts are generally close to being in order. All inserts would take place at the end of the clustered table. Eg: I have 5 million records with Sequence spanning 1 to 5 million. The INSERT app will be inserting sequence’s at the end of that range at any given time. Reordering of the data should be minimal (tens of thousands of records at most). Now, the UPDATE app is our .NET star. It does all UPDATES on the Sequence column. “Update Table_Docs Set Feild1=This, Field2=That…WHERE Sequence =12345” – hundreds of thousands of these a day. The UPDATES are completely and totally, random, touching all points of the table. All other processes are simply doing SELECT’s on this (Web pages). Regular indexes cover those. So my question is, what’s better….a unique clustered index on the ID column, benefiting the INSERT app, or a non-unique clustered index on the Sequence, benefiting the UPDATE app?

  Read the article

• PHP, MySQL: Display only required parts of my website in sister website

  - by Devner

  Hi all, Now I have my website built on PHP & Mysql. Consider this like a forum. Now when a user posts a reply in my website 1 (ex. www.website1.com), I want to be able to show the starting thread and it's related replies in a sister website of mine. I want to do this in a way that it does not show the rest of the page & other page contents (like logo etc.). I don't think iframe would be a solution because an iframe would embed the whole page and the users visiting my sister website (totally different domain i.e. www.website2.com) would be able to see all the page contents, like logo etc. I want to avoid that. I want to make them see only limited information from website 1 and only the info. that I intend. I hope that makes sense. In a way, you could say that I am trying to replicate my 1 website, and show only a limited part of it. Users browsing 2nd website can post a reply in the 2nd website and it should automatically be posted & visible to the visitors of the website 1. Users of website 1 should not know that a user of website 2 has posted it. They would feel that some user from website 1 has posted it. Do I have to use 2 separate mysql DB or just 1? I think it would be problematic if I am trying to use different DB. I also feel I might have to face DB connectivity issues as I can connect to only 1 DB at a time. It's basically like users of website1.com should feel that they are replying to users of website1.com & users of website2.com should feel that they are replying to users of website2.com. (I need it this way to bridge the gap between them). At the same time I want to make the front end of the websites different so that they don't feel that they are replying to some other users outside the domain. These websites would be under my control and I will have access to the source code at any time. If I need to change the source code, these changes are welcome. Is this really possible? Thank you in advance.

  Read the article

• Flex bug?? Get messed up stacked ColumnChart with type="100%"

  - by Nir

  I am trying to do a stacked Column chart with type="100%" and a mixture of positive and negative values. When all the values are positive, is functions well, but when negative numbers come to the game, it looks totally messed up. When I also look at Adobe documentation (look here), I see the following code for stacked column chart involving negative numbers: <?xml version="1.0"?> <!-- charts/StackedNegative.mxml --> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"> <mx:Script><![CDATA[ import mx.collections.ArrayCollection; [Bindable] public var expenses:ArrayCollection = new ArrayCollection([ {Month:"Jan", Profit:-2000, Expenses:-1500}, {Month:"Feb", Profit:1000, Expenses:-200}, {Month:"Mar", Profit:1500, Expenses:-500} ]); ]]></mx:Script> <mx:Panel title="Column Chart"> <mx:ColumnChart id="myChart" dataProvider="{expenses}" showDataTips="true"> <mx:horizontalAxis> <mx:CategoryAxis dataProvider="{expenses}" categoryField="Month" /> </mx:horizontalAxis> <mx:series> <mx:ColumnSet type="stacked" allowNegativeForStacked="true"> <mx:series> <mx:ColumnSeries xField="Month" yField="Profit" displayName="Profit" /> <mx:ColumnSeries xField="Month" yField="Expenses" displayName="Expenses" /> </mx:series> </mx:ColumnSet> </mx:series> </mx:ColumnChart> <mx:Legend dataProvider="{myChart}"/> </mx:Panel> </mx:Application> It works fine. But try to change: <mx:ColumnSet type="stacked" allowNegativeForStacked="true"> to: <mx:ColumnSet type="100%" allowNegativeForStacked="true"> and you'll see that it doesn't on January data, where both values are negative, the chart shows as if they are positive, and on the other two where one value is positive and the other is negative, it shows only the positive part as 100%... Isn't it a Flex Bug? I have my own case with such data and it behaves wrong the same way. I'd expect that if it has 800 stacked on -200, it will show 80% up and 20% down, totalling 100%. BTW: Using Flex 4, though these are all mx components. Thanks a lot and regards from Berlin, Germany, Nir.

  Read the article

• .NET Free memory usage (how to prevent overallocation / release memory to the OS)

  - by Ronan Thibaudau

  I'm currently working on a website that makes large use of cached data to avoid roundtrips. At startup we get a "large" graph (hundreds of thouthands of different kinds of objects). Those objects are retrieved over WCF and deserialized (we use protocol buffers for serialization) I'm using redgate's memory profiler to debug memory issues (the memory didn't seem to fit with how much memory we should need "after" we're done initializing and end up with this report Now what we can gather from this report is that: 1) Most of the memory .NET allocated is free (it may have been rightfully allocated during deserialisation, but now that it's free, i'd like for it to return to the OS) 2) Memory is fragmented (which is bad, as everytime i refresh the cash i need to redo the memory hungry deserialisation process and this, in turn creates large object that may throw an OutOfMemoryException due to fragmentation) 3) I have no clue why the space is fragmented, because when i look at the large object heap, there are only 30 instances, 15 object[] are directly attached to the GC and totally unrelated to me, 1 is a char array also attached directly to the GC Heap, the remaining 15 are mine but are not the cause of this as i get the same report if i comment them out in code. So my question is, what can i do to go further with this? I'm not really sure what to look for in debugging / tools as it seems my memory is fragmented, but not by me, and huge amounts of free spaces are allocated by .net , which i can't release. Also please make sure you understand the question well before answering, i'm not looking for a way to free memory within .net (GC.Collect), but to free memory that is already free in .net , to the system as well as to defragment said memory. Note that a slow solution is fine, if it's possible to manually defragment the large heap i'd be all for it as i can call it at the end of RefreshCache and it's ok if it takes 1 or 2 second to run. Thanks for your help! A few notes i forgot: 1) The project is a .net 2.0 website, i get the same results running it in a .net 4 pool, idem if i run it in a .net 4 pool and convert it to .net 4 and recompile. 2) These are results of a release build, so debug build can not be the issue. 3) And this is probably quite important, i do not get these issues at all in the webdev server, only in IIS, in the webdev i get memory consumption rather close to my actual consumption (well more, but not 5-10X more!)

  Read the article

• close file with fclose() but file still in use

  - by Marco

  Hi all, I've got a problem with deleting/overwriting a file using my program which is also being used(read) by my program. The problem seems to be that because of the fact my program is reading data from the file (output.txt) it puts the file in a 'in use' state which makes it impossible to delete or overwrite the file. I don't understand why the file stays 'in use' because I close the file after use with fclose(); this is my code: bool bBool = true while(bBool){ //Run myprogram.exe tot generate (a new) output.txt //Create file pointer and open file FILE* pInputFile = NULL; pInputFile = fopen("output.txt", "r"); // //then I do some reading using fscanf() // //And when I'm done reading I close the file using fclose() fclose(pInputFile); //The next step is deleting the output.txt if( remove( "output.txt" ) == -1 ){ //ERROR }else{ //Succesfull } } I use fclose() to close the file but the file remains in use by my program until my program is totally shut down. What is the solution to free the file so it can be deleted/overwrited? In reality my code isn't a loop without an end ; ) Thanks in advance! Marco Update Like ask a part of my code which also generates the file 'in use'. This is not a loop and this function is being called from the main(); Here is a piece of code: int iShapeNr = 0; void firstRun() { //Run program that generates output.txt runProgram(); //Open Shape data file FILE* pInputFile = NULL; int iNumber = 0; pInputFile = fopen("output.txt", "r"); //Put all orientations of al detected shapes in an array int iShapeNr = 0; int iRotationBuffer[1024];//1024 is maximum detectable shapes, can be changed in RoboRealm int iXMinBuffer[1024]; int iXMaxBuffer[1024]; int iYMinBuffer[1024]; int iYMaxBuffer[1024]; while(feof(pInputFile) == 0){ for(int i=0;i<9;i++){ fscanf(pInputFile, "%d", &iNumber); fscanf(pInputFile, ","); if(i == 1) { iRotationBuffer[iShapeNr] = iNumber; } if(i == 3){//xmin iXMinBuffer[iShapeNr] = iNumber; } if(i == 4){//xmax iXMaxBuffer[iShapeNr] = iNumber; } if(i == 5){//ymin iYMinBuffer[iShapeNr] = iNumber; } if(i == 6){//ymax iYMaxBuffer[iShapeNr] = iNumber; } } iShapeNr++; } fflush(pInputFile); fclose(pInputFile); } The while loop parses the file. The output.txt contains sets of 9 variables, the number of sets is unknown but always in sets of 9. output.txt could contain for example: 0,1,2,3,4,5,6,7,8,8,7,6,5,4,1,2,3,0

  Read the article

• Project Euler #18 - how to brute force all possible paths in tree-like structure using Python?

  - by euler user

  Am trying to learn Python the Atlantic way and am stuck on Project Euler #18. All of the stuff I can find on the web (and there's a LOT more googling that happened beyond that) is some variation on 'well you COULD brute force it, but here's a more elegant solution'... I get it, I totally do. There are really neat solutions out there, and I look forward to the day where the phrase 'acyclic graph' conjures up something more than a hazy, 1 megapixel resolution in my head. But I need to walk before I run here, see the state, and toy around with the brute force answer. So, question: how do I generate (enumerate?) all valid paths for the triangle in Project Euler #18 and store them in an appropriate python data structure? (A list of lists is my initial inclination?). I don't want the answer - I want to know how to brute force all the paths and store them into a data structure. Here's what I've got. I'm definitely looping over the data set wrong. The desired behavior would be to go 'depth first(?)' rather than just looping over each row ineffectually.. I read ch. 3 of Norvig's book but couldn't translate the psuedo-code. Tried reading over the AIMA python library for ch. 3 but it makes too many leaps. triangle = [ [75], [95, 64], [17, 47, 82], [18, 35, 87, 10], [20, 4, 82, 47, 65], [19, 1, 23, 75, 3, 34], [88, 2, 77, 73, 7, 63, 67], [99, 65, 4, 28, 6, 16, 70, 92], [41, 41, 26, 56, 83, 40, 80, 70, 33], [41, 48, 72, 33, 47, 32, 37, 16, 94, 29], [53, 71, 44, 65, 25, 43, 91, 52, 97, 51, 14], [70, 11, 33, 28, 77, 73, 17, 78, 39, 68, 17, 57], [91, 71, 52, 38, 17, 14, 91, 43, 58, 50, 27, 29, 48], [63, 66, 4, 68, 89, 53, 67, 30, 73, 16, 69, 87, 40, 31], [04, 62, 98, 27, 23, 9, 70, 98, 73, 93, 38, 53, 60, 4, 23], ] def expand_node(r, c): return [[r+1,c+0],[r+1,c+1]] all_paths = [] my_path = [] for i in xrange(0, len(triangle)): for j in xrange(0, len(triangle[i])): print 'row ', i, ' and col ', j, ' value is ', triangle[i][j] ??my_path = somehow chain these together??? if my_path not in all_paths all_paths.append(my_path) Answers that avoid external libraries (like itertools) preferred.

  Read the article

• Why does std::map operator[] create an object if the key doesn't exist?

  - by n1ck

  Hi, I'm pretty sure I already saw this question somewhere (comp.lang.c++? Google doesn't seem to find it there either) but a quick search here doesn't seem to find it so here it is: Why does the std::map operator[] create an object if the key doesn't exist? I don't know but for me this seems counter-intuitive if you compare to most other operator[] (like std::vector) where if you use it you must be sure that the index exists. I'm wondering what's the rationale for implementing this behavior in std::map. Like I said wouldn't it be more intuitive to act more like an index in a vector and crash (well undefined behavior I guess) when accessed with an invalid key? Refining my question after seeing the answers: Ok so far I got a lot of answers saying basically it's cheap so why not or things similar. I totally agree with that but why not use a dedicated function for that (I think one of the comment said that in java there is no operator[] and the function is called put)? My point is why doesn't map operator[] work like a vector? If I use operator[] on an out of range index on a vector I wouldn't like it to insert an element even if it was cheap because that probably mean an error in my code. My point is why isn't it the same thing with map. I mean, for me, using operator[] on a map would mean: i know this key already exist (for whatever reason, i just inserted it, I have redundancy somewhere, whatever). I think it would be more intuitive that way. That said what are the advantage of doing the current behavior with operator[] (and only for that, I agree that a function with the current behavior should be there, just not operator[])? Maybe it give clearer code that way? I don't know. Another answer was that it already existed that way so why not keep it but then, probably when they (the ones before stl) choose to implement it that way they found it provided an advantage or something? So my question is basically: why choose to implement it that way, meaning a somewhat lack of consistency with other operator[]. What benefit do it give? Thanks

  Read the article

• Visual studio 2010 colourizers, intellisense and the rest. Where to start!!

  - by Owen

  Ok, before I begin I realize that there is a lot of documentation on this subject but I have thus far failed to get even basic colourization working for VS2010. My goal is to simply get to a point where I can open a document and everything is coloured red, from here I can implement the relevant parsing logic. Here's what I have tried/found: 1) Downloaded all the relevent SDK's and such- Found the ook sample (http://code.msdn.microsoft.com/ookLanguage) - didn't build, didn't work. 2) Knowing almost nothing about MEF read through "Implementing a Language Service By Using the Managed Package Framework" - http://msdn.microsoft.com/en-us/library/bb166533(v=VS.100).aspx This was pretty much a copy and paste of all the basic stuff here, and also updating some references which were out of date with the sample see: http://social.msdn.microsoft.com/Forums/en-US/vsx/thread/a310fe67-afd2-4592-b295-3fc86fec7996 Now, I have got to a point where when running the package MEF appears to have hooked up correctly (I know this because with the debugger open I can see that the packages initialize and FDoIdle methods are being hit). When I open a file of the extension I have registered with the ProvideLanguageExtensionAttribute everything dies as if in an endless loop, yet no debug symbols hit (though they are loaded). Looking at the ook sample and the MEF examples they seem to be totally different approaches to the same problem. In the ook sample there are notions of Clasifications and Completion controllers which aren't mentioned in the MEF example. Also, they don't seem to create a Package or Language service, so I have no idea how it should work? With the MEF example, my assumption is that I need to hook into the "IScanner.ScanTokenAndProvideInfoAboutIt" to provide syntax highlighting? Which would be fine if I could ever hit this method. So my first question I guess is which approach should I be taking here? Or do they both somehow tie together? My second questions is, where can I find a basic fully working project that implements bog standard basic syntax highlighting and intellisense or VS2010? Thirdly, in the MEF example when I created a Package there were a bunch of test projects created for me. I appears that the integration tests launch the VS2010 test rig somehow, but the test fails. It would be good to write my service with tests but I have no idea what/how I can test each interaction so any references to testing Language services would be helpful. Finally, please throw any resource/book links my way that I may find useful. Cheers, Chris. N.B. Sorry I realize this is part question part rant, but I have never been so confused.

  Read the article

• Vector iterators in for loops, return statements, warning, c++

  - by Crystal

  Had 3 questions regarding a hw assignment for C++. The goal was to create a simple palindrome method. Here is my template for that: #ifndef PALINDROME_H #define PALINDROME_H #include <vector> #include <iostream> #include <cmath> template <class T> static bool palindrome(const std::vector<T> &input) { std::vector<T>::const_iterator it = input.begin(); std::vector<T>::const_reverse_iterator rit = input.rbegin(); for (int i = 0; i < input.size()/2; i++, it++, rit++) { if (!(*it == *rit)) { return false; } } return true; } template <class T> static void showVector(const std::vector<T> &input) { for (std::vector<T>::const_iterator it = input.begin(); it != input.end(); it++) { std::cout << *it << " "; } } #endif Regarding the above code, can you have more than one iterator declared in the first part of the for loop? I tried defining both the "it" and "rit" in the palindrome() method, and I kept on getting an error about needing a "," before rit. But when I cut and paste outside the for loop, no errors from the compiler. (I'm using VS 2008). Second question, I pretty much just brain farted on this one. But is the way I have my return statements in the palindrome() method ok? In my head, I think it works like, once the *it and *rit do not equal each other, then the function returns false, and the method exits at this point. Otherwise if it goes all the way through the for loop, then it returns true at the end. I totally brain farted on how return statements work in if blocks and I tried looking up a good example in my book and I couldn't find one. Finally, I get this warnings: \palindrome.h(14) : warning C4018: '<' : signed/unsigned mismatch Now is that because I run my for loop until (i < input.size()/2) and the compiler is telling me that input can be negative? Thanks!

  Read the article

• How to reconcile my support of open-source software and need to feed and house myself?

  - by Guzba

  I have a bit of a dilemma and wanted to get some other developers' opinions on it and maybe some guidance. So I have created a 2D game for Android from the ground up, learning and re factoring as I went along. I did it for the experience, and have been proud of the results. I released it for free as ad supported with AdMob not really expecting much out of it, but curious to see what would happen. Its been a few of months now since release, and it has become very popular (250k downloads!). Additionally, the ad revenue is great and is driving me to make more good games and even allowing me to work less so that I can focus on my own works. When I originally began working on the game, I was pretty new to concurrency and completely new to Android (had Java experience though). The standard advice I got for starting an Android game was to look at the sample games from Google (Snake, Lunar Lander, ...) so I did. In my opinion, these Android sample games from Google are decent to see in general what your code should look like, but not actually all that great to follow. This is because some of their features don't work (saving game state), the concurrency is both unexplained and cumbersome (there is no real separation between the game thread and the UI thread since they sync lock each other out all the time and the UI thread runs game thread code). This made it difficult for me as a newbie to concurrency to understand how it was organized and what was really running what code. Here is my dilemma: After spending this past few months slowly improving my code, I feel that it could be very beneficial to developers who are in the same position that I was in when I started. (Since it is not a complex game, but clearly coded in my opinion.) I want to open up the source so that others can learn from it but don't want to lose my ad revenue stream, which, if I did open the source, I fear I would when people released versions with the ad stripped, or minor tweaks that would fragment my audience, etc. I am a CS undergrad major in college and this money is giving me the freedom to work less at summer job, thus giving me the time and will to work on more of my own projects and improving my own skills while still paying the bills. So what do I do? Open the source at personal sacrifice for the greater good, or keep it closed and be a sort of hypocritical supporter of open source?

  Read the article

• Wordpress plugin $post

  - by Jordan Pagaduan

  I have already get how to insert in the database. My only problem is to get the value of text box to insert in the database. Here is my code: function dbAdd() { global $wpdb; $new_title = $_POST['new_title']; $new_author = $_POST['new_author']; $new_url = $_POST['new_url']; if($wpdb->insert('wp_podcast_data', array( 'mp3_id' => '', 'title' => '$new_title', 'creator' => '$new_author', 'url' => '$new_url') )) { echo"<h1>Save Successfully!</h1>"; }else { echo mysql_error(); } } ---------------------------------------------------------- function player_manager_index() { if($_SERVER['REQUEST_METHOD']=='POST') { dbAdd(); } ?> <h3>Podcast Player Manager (This Plug is not yet finish)</h3><br /> <p>Note: This Player Manager needs the URL of mp3 file that you want to include in your podcast player.</p> <form method="post" action=""> <label for="new_title" style="display:block; padding-top: 5px; cursor: default;">Title</label><input type="text" id="new_title" name="new_title" size="50" /> <label for="new_author" style="display:block; padding-top: 5px; cursor: default;">Author</label><input type="text" id="new_author" name="new_author" size="50" /> <label for="new_url" style="display:block; padding-top: 5px; cursor: default;">URL</label><input type="text" id="new_url" name="new_url" size="50" /> <div><input type="submit" value="Add New" style="margin-left: 20px; margin-top: 15px;" /></div> </form> Please Help me. I'm newbie in wordpress. Thank you so much.

  Read the article

• jquery in ajax loaded content

  - by Kim Gysen

  My application is supposed to be a single page application and I have the following code that works fine: home.php: <div id="container"> </div> accordion.php: //Click functions: load content $('#parents').click(function(){ //Load parent in container $('#container').load('http://www.blabla.com/entities/parents/parents.php'); }); parents.php: <div class="entity_wrapper"> Some divs and selectors </div> <script type="text/javascript"> $(document).ready(function(){ //Some jQuery / javascript }); </script> So the content loads fine, while the scripts dynamically loaded execute fine as well. I apply this system repetitively and it continues to work smoothly. I've seen that there are a lot of frameworks available on SPA's (such as backbone.js) but I don't understand why I need them if this works fine. From the backbone.js website: When working on a web application that involves a lot of JavaScript, one of the first things you learn is to stop tying your data to the DOM. It's all too easy to create JavaScript applications that end up as tangled piles of jQuery selectors and callbacks, all trying frantically to keep data in sync between the HTML UI, your JavaScript logic, and the database on your server. For rich client-side applications, a more structured approach is often helpful. Well, I totally don't have the feeling that I'm going through the stuff they mention. Adding the javascript per page works really well for me. They are html containers with clear scope and the javascript is just related to that part. More over, the front end doesn't do that much, most of the logic is managed based on Ajax calls to external PHP scripts. Sometimes the js can be a bit more extended for some functionalities, but all just loads as smooth in less than a second. If you think that this is bad coding, please tell me why I cannot do this and more importantly, what is the alternative I should apply. At the moment, I really don't see a reason on why I would change this approach as it just works too well. I'm kinda stuck on this question because it just worries me sick as it seems to easy to be true. Why would people go through hard times if it would be as easy as this...

  Read the article

• Javascript table construction bug using JQuery in Firefox on Mac OSX

  - by Poita_

  I'm using some code to build up tables using JQuery, but in Firefox 3.5.3 on Mac OSX, the table cells all appear on separate lines by themselves, instead of in their respective rows. Chrome 5.0.342.7 beta on OSX correctly produces the table, as does Safari 4.0.5. Here is a minimal reproduction case: <html> <body> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript"> $(document).ready(function() { var b = $('body'); b.append("<table>"); for (var i = 0; i < 3; ++i) { b.append("<tr>"); for (var j = 0; j < 3; ++j) b.append("<td>x</td>"); b.append("</tr>"); } b.append("</table>"); }); </script> </body> </html> In Chrome and Safari, I get this correct output: x x x x x x x x x but Firefox produces: x x x x x x x x x Note that if I manually create that exact table without using Javascript (i.e. direct into the HTML) then the table appears correctly in Firefox. Also, if I change the JS to append then entire table in one call then it also works -- the only time it doesn't work is if you append it part-by-part as I have done before. My question is: is this to be expected, or should I report this as a bug to Firefox? I'm pretty sure this is a Firefox bug, but I'm a bit of a newbie to JS and web development in general, so perhaps there's something I'm missing? P.S. obviously there are easy ways to get around this -- that's not my concern. See above.

  Read the article

• Crystal Reports : How to add an external assembly class?

  - by Sunil

  I am using VS2010, CrystalReport13 & MVC3. My problem is unable to add an external assembly in Crystal Report using "Database Expert" Option. I have a class named WeeklyReportModel in an external assembly. In my web project, data retrieving from DB as IEnumerable collection of WeeklyReportModel. I tried ProjectData - .NetObjects in Crystal Report for adding the WeeklyReportModel. But this external assembly is not showing under ".NetObjects". Then I tried other option as Create New Connection - ADO.Net – Make New Connection and pointed this External Assembly. It has been added under Ado.Net node, but while expanding displays as "...no items found..." Totally frustrated. Please help. External Assembly Class: namespace SMS.Domain { public class WeeklyReportModel { public int StoreId { get; set; } public string StoreName{ get; set; } public decimal Saturday { get; set; } public decimal Sunday { get; set; } public decimal Monday { get; set; } public decimal Tuesday { get; set; } public decimal Wednesday { get; set; } public decimal Thurday { get; set; } public decimal Friday { get; set; } public decimal Average { get; set; } public string DateRange { get; set; } } } In Controller-action[Data retrieving as Collection Of WeeklyReportModel] namespace SMS.UI.Controllers { public class ReportController : Controller { public ActionResult StoreWeeklyReport(string id) { DateTime weekStart, weekClose; string[] dateArray = id.Split('_'); weekStart = Convert.ToDateTime(dateArray[0].ToString()); weekClose = Convert.ToDateTime(dateArray[1].ToString()); SMS.Infrastructure.Report.AuditReport weeklyReport = new SMS.Infrastructure.Report.AuditReport(); IEnumerable<SMS.Domain.WeeklyReportModel> weeklyRpt = weeklyReport.ReportByStore().WeeklyReport(weekStart, weekClose); Session["WeeklyData"] = weeklyRpt; Response.Redirect("~/Reports/Weekly/StoreWeekly.aspx"); return View(); } } } Thanks in advance.

  Read the article

• How to fix OpenGL/SDL runtime error which is probobly caused by adding textures [closed]

  - by Arturs Lapins

  Hello I've recently worked with OpenGL and SDL and I was adding textures to my GL_QUADS and when I ran my program I came across with a runtime error. I've searched all over the internet for a fix but I couldn't find anything so I guess I had one more option. Asking here. So here is some of my code. int loadTexture(std::string fileName){ SDL_Surface *image=IMG_Load(fileName.c_str()); SDL_DisplayFormatAlpha(image); unsigned int id; glGenTextures(1,&id); glBindTexture(GL_TEXTURE_2D,&id); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_NEAREST); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_NEAREST); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S,GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T,GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D,0,GL_RGBA,image->w,image >h,0,GL_RGBA,GL_UNSIGNED_BYTE,image->pixels); SDL_FreeSurface(image); return id; } That's my loadTexture function. void init() { glClearColor(0.0, 0.0, 0.0, 1.0); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0, 800.0 / 600.0, 1.0, 500.0); glMatrixMode(GL_MODELVIEW); glEnable(GL_DEPTH_TEST); glEnable(GL_TEXTURE_2D); tex=loadTexture("test.png"); } That's my init function for OpenGL. Btw I have declared my tex variable. void render() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); glTranslatef(0.0, 0.0, -10.0); glRotatef(rotation, 1.0, 1.0, 1.0); glBindTexture(GL_TEXTURE_2D, tex); glBegin(GL_QUADS); glTexCoord2f(1.0, 0.0); glVertex3f(-2.0, 2.0, 0.0); glTexCoord2f(1.0, 1.0); glVertex3f(2.0, 2.0, 0.0); glTexCoord2f(1.0, 0.0); glVertex3f(2.0, -2.0, 0.0); glTexCoord2f(0.0, 0.0); glVertex3f(-2.0, -2.0, 0.0); glEnd(); } That's my render function for all my OpenGL render stuff... The render function is called in the main function which contains a game loop. Here is the runtime error when I run it with Visual C++ Unhandled exception at 0x004ffee9 in OpenGL Crap.exe: 0xC0000005: Access violation reading location 0x05c90000. So I have only had this error when I added textures... ... So I found where the error occured it was at this line glTexImage2D(GL_TEXTURE_2D,0,GL_RGBA,image->w,image->h,0,GL_RGBA,GL_UNSIGNED_BYTE,image->pixels); but I have totally no Idea what could it be. Update Only thanks to zero298

  Read the article

• Messing with the stack in assembly and c++

  - by user246100

  I want to do the following: I have a function that is not mine (it really doesn't matter here but just to say that I don't have control over it) and that I want to patch so that it calls a function of mine, preserving the arguments list (jumping is not an option). What I'm trying to do is, to put the stack pointer as it was before that function is called and then call mine (like going back and do again the same thing but with a different function). This doesn't work straight because the stack becomes messed up. I believe that when I do the call it replaces the return address. So, I did a step to preserve the return address saving it in a globally variable and it works but this is not ok because I want it to resist to recursitivy and you know what I mean. Anyway, i'm a newbie in assembly so that's why I'm here. Please, don't tell me about already made software to do this because I want to make things my way. Of course, this code has to be compiler and optimization independent. My code (If it is bigger than what is acceptable please tell me how to post it): // A function that is not mine but to which I have access and want to patch so that it calls a function of mine with its original arguments void real(int a,int b,int c,int d) { } // A function that I want to be called, receiving the original arguments void receiver(int a,int b,int c,int d) { printf("Arguments %d %d %d %d\n",a,b,c,d); } long helper; // A patch to apply in the "real" function and on which I will call "receiver" with the same arguments that "real" received. __declspec( naked ) void patch() { _asm { // This first two instructions save the return address in a global variable // If I don't save and restore, the program won't work correctly. // I want to do this without having to use a global variable mov eax, [ebp+4] mov helper,eax push ebp mov ebp, esp // Make that the stack becomes as it were before the real function was called add esp, 8 // Calls our receiver call receiver mov esp, ebp pop ebp // Restores the return address previously saved mov eax, helper mov [ebp+4],eax ret } } int _tmain(int argc, _TCHAR* argv[]) { FlushInstructionCache(GetCurrentProcess(),&real,5); DWORD oldProtection; VirtualProtect(&real,5,PAGE_EXECUTE_READWRITE,&oldProtection); // Patching the real function to go to my patch ((unsigned char*)real)[0] = 0xE9; *((long*)((long)(real) + sizeof(unsigned char))) = (char*)patch - (char*)real - 5; // calling real function (I'm just calling it with inline assembly because otherwise it seems to works as if it were un patched // that is strange but irrelevant for this _asm { push 666 push 1337 push 69 push 100 call real add esp, 16 } return 0; }

  Read the article

• Cakephp query doesn't render correct data

  - by user2915012

  I'm totally new in cakephp and fetching problem at the time of query to render data I tried this to find out categories/warehouses table info but failed.. $cart_products = $this->Order->OrdersProduct->find('all', array( 'fields' => array('*'), 'contain' => array('Category'), 'joins' => array( array( 'table' => 'products', 'alias' => 'Product', 'type' => 'LEFT', 'conditions' => array('Product.id = OrdersProduct.product_id') ), array( 'table' => 'orders', 'alias' => 'Order', 'type' => 'LEFT', 'conditions' => array('Order.id = OrdersProduct.order_id') ) ), 'conditions' => array( 'Order.store_id' => $store_id, 'Order.order_status' => 'in_cart' ) )); I need the result something like this... Array ( [0] => Array ( [OrdersProduct] => Array ( [id] => 1 [order_id] => 1 [product_id] => 16 [qty] => 10 [created] => 2013-10-24 08:04:33 [modified] => 2013-10-24 08:04:33 ) [Product] => Array ( [id] => 16 [part] => 56-987xyz [title] => iPhone 5 battery [description] => iPhone 5c description [wholesale_price] => 4 [retail_price] => 8 [purchase_cost] => 2 [sort_order] => [Category] => array( [id] => 1, [name] => Iphone 5 ) [Warehouse] => array( [id] => 1, [name] => Warehouse1 ) [weight] => [created] => 2013-10-22 12:14:57 [modified] => 2013-10-22 12:14:57 ) ) ) How can I find this? Can anybody help me? thanks

  Read the article

• How to create multiple Repository object inside a Repository class using Unit Of Work?

  - by Santosh

  I am newbie to MVC3 application development, currently, we need following Application technologies as requirement MVC3 framework IOC framework – Autofac to manage object creation dynamically Moq – Unit testing Entity Framework Repository and Unit Of Work Pattern of Model class I have gone through many article to explore an basic idea about the above points but still I am little bit confused on the “Repository and Unit Of Work Pattern “. Basically what I understand Unit Of Work is a pattern which will be followed along with Repository Pattern in order to share the single DB Context among all Repository object, So here is my design : IUnitOfWork.cs public interface IUnitOfWork : IDisposable { IPermitRepository Permit_Repository{ get; } IRebateRepository Rebate_Repository { get; } IBuildingTypeRepository BuildingType_Repository { get; } IEEProjectRepository EEProject_Repository { get; } IRebateLookupRepository RebateLookup_Repository { get; } IEEProjectTypeRepository EEProjectType_Repository { get; } void Save(); } UnitOfWork.cs public class UnitOfWork : IUnitOfWork { #region Private Members private readonly CEEPMSEntities context = new CEEPMSEntities(); private IPermitRepository permit_Repository; private IRebateRepository rebate_Repository; private IBuildingTypeRepository buildingType_Repository; private IEEProjectRepository eeProject_Repository; private IRebateLookupRepository rebateLookup_Repository; private IEEProjectTypeRepository eeProjectType_Repository; #endregion #region IUnitOfWork Implemenation public IPermitRepository Permit_Repository { get { if (this.permit_Repository == null) { this.permit_Repository = new PermitRepository(context); } return permit_Repository; } } public IRebateRepository Rebate_Repository { get { if (this.rebate_Repository == null) { this.rebate_Repository = new RebateRepository(context); } return rebate_Repository; } } } PermitRepository .cs public class PermitRepository : IPermitRepository { #region Private Members private CEEPMSEntities objectContext = null; private IObjectSet<Permit> objectSet = null; #endregion #region Constructors public PermitRepository() { } public PermitRepository(CEEPMSEntities _objectContext) { this.objectContext = _objectContext; this.objectSet = objectContext.CreateObjectSet<Permit>(); } #endregion public IEnumerable<RebateViewModel> GetRebatesByPermitId(int _permitId) { // need to implment } } PermitController .cs public class PermitController : Controller { #region Private Members IUnitOfWork CEEPMSContext = null; #endregion #region Constructors public PermitController(IUnitOfWork _CEEPMSContext) { if (_CEEPMSContext == null) { throw new ArgumentNullException("Object can not be null"); } CEEPMSContext = _CEEPMSContext; } #endregion } So here I am wondering how to generate a new Repository for example “TestRepository.cs” using same pattern where I can create more then one Repository object like RebateRepository rebateRepo = new RebateRepository () AddressRepository addressRepo = new AddressRepository() because , what ever Repository object I want to create I need an object of UnitOfWork first as implmented in the PermitController class. So if I would follow the same in each individual Repository class that would again break the priciple of Unit Of Work and create multiple instance of object context. So any idea or suggestion will be highly appreciated. Thank you

  Read the article

• Searching for duplicate records within a text file where the duplicate is determined by only two fie

  - by plg

  First, Python Newbie; be patient/kind. Next, once a month I receive a large text file (think 7 Million records) to test for duplicate values. This is catalog information. I get 7 fields, but the two I'm interested in are a supplier code and a full orderable part number. To determine if the record is dupliacted, I compress all special characters from the part number (except . and #) and create a compressed part number. The test for duplicates becomes the supplier code and compressed part number combination. This part is fairly straight forward. Currently, I am just copying the original file with 2 new columns (compressed part and duplicate indicator). If the part is a duplicate, I put a "YES" in the last field. Now that this is done, I want to be able to go back (or better yet, at the same time) to get the previous record where there was a supplier code/compressed part number match. So far, my code looks like this: Compress Full Part to a Compressed Part and Check for Duplicates on Supplier Code and Compressed Part combination import sys import re import time ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ start=time.time() try: file1 = open("C:\Accounting\May Accounting\May.txt", "r") except IOError: print sys.stderr, "Cannot Open Read File" sys.exit(1) try: file2 = open(file1.name[0:len(file1.name)-4] + "_" + "COMPRESSPN.txt", "a") except IOError: print sys.stderr, "Cannot Open Write File" sys.exit(1) hdrList="CIGSUPPLIER|FULL_PART|PART_STATUS|ALIAS_FLAG|ACQUISITION_FLAG|COMPRESSED_PART|DUPLICATE_INDICATOR" file2.write(hdrList+chr(10)) lines_seen=set() affirm="YES" records = file1.readlines() for record in records: fields = record.split(chr(124)) if fields[0]=="CIGSupplier": continue #If incoming file has a header line, skip it file2.write(fields[0]+"|"), #Supplier Code file2.write(fields[1]+"|"), #Full_Part file2.write(fields[2]+"|"), #Part Status file2.write(fields[3]+"|"), #Alias Flag file2.write(re.sub("[$\r\n]", "", fields[4])+"|"), #Acquisition Flag file2.write(re.sub("[^0-9a-zA-Z.#]", "", fields[1])+"|"), #Compressed_Part dupechk=fields[0]+"|"+re.sub("[^0-9a-zA-Z.#]", "", fields[1]) if dupechk not in lines_seen: file2.write(chr(10)) lines_seen.add(dupechk) else: file2.write(affirm+chr(10)) print "it took", time.time() - start, "seconds." ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ file2.close() file1.close() It runs in less than 6 minutes, so I am happy with this part, even if it is not elegant. Right now, when I get my results, I import the results into Access and do a self join to locate the duplicates. Loading/querying/exporting results in Access a file this size takes around an hour, so I would like to be able to export the matched duplicates to another text file or an Excel file. Confusing enough? Thanks.

  Read the article

• JavaScript (via Greasemonkey) failing to set "title" attributes on <a> tags

  - by rjray

  I have the following (fairly) simple JavaScript snippet that I have wired into Greasemonkey. It goes through a page, looks for <a> tags whose href points to tinyurl.com, and adds a "title" attribute that identifies the true destination of the link. Much of the important code comes from an older (unsupported) Greasemonkey script that quits working when the inner component that held the XPath implementation changed. My script: (function() { var providers = new Array(); providers['tinyurl.com'] = function(link, fragment) { // This is mostly taken from the (broken due to XPath component // issues) tinyurl_popup_preview script. link.title = "Loading..."; GM_xmlhttpRequest({ method: 'GET', url: 'http://preview.tinyurl.com/' + fragment, onload: function(res) { var re = res.responseText.match("<blockquote><b>(.+)</b></blockquote>"); if (re) { link.title = re[1].replace(/\<br \/\>/g, "").replace(/&amp;/g, "&"); } else { link.title = "Parsing failed..."; } }, onerror: function() { link.title = "Connection failed..."; } }); }; var uriPattern = /(tinyurl\.com)\/([a-zA-Z0-9]+)/; var aTags = document.getElementsByTagName("a"); for (i = 0; i < aTags.length; i++) { var data = aTags[i].href.match(uriPattern); if (data != null && data.length > 1 && data[2] != "preview") { var source = data[1]; var fragment = data[2]; var link = aTags[i]; aTags[i].addEventListener("mouseover", function() { if (link.title == "") { (providers[source])(link, fragment); } }, false); } } })(); (The reason the "providers" associative array is set up the way it is, is so that I can expand this to cover other URL-shortening services as well.) I have verified that all the various branches of code are being reached correctly, in cases where the link being examined does and does not match the pattern. What isn't happening, is any change to the "title" attribute of the anchor tags. I've watched this via Firebug, thrown alert() calls in left and right, and it just never changes. In a previous iteration all expressions of the form: link.title = "..."; had originally been: link.setAttribute("title", "..."); That didn't work, either. I'm no newbie to JavaScript OR Greasemonkey, but this one has me stumped!

  Read the article

• How do I use JDK 7 on Mac OSX?

  - by Yko

  OK. This is a newbie question but I can't figure it out... I would like to use the WatchService API as mentioned in this link: http://download.oracle.com/javase/tutorial/essential/io/notification.html After reading around, I found out that WatchService is part of the NIO class which is scheduled for JDK 7. So, it is in beta form. It's fine. http://jdk7.java.net/download.html has the JDK which I downloaded and extracted. I got a bunch of folders. I don't know what to do with them. Then, I read around some more and found that some nice group of people created JDK 7 as a binary so someone like me can install it easily. It is called Open JDK: http://code.google.com/p/openjdk-osx-build/ So, I downloaded the .dmg file and instal it. Then I open "Java Preference" and see that OpenJDK7 is available. So, now I feel that I can start trying out WatchService API. From the tutorial in the first link, the author gave a .java file to test it out first and make sure that it is running. Here is the link to the file: http://download.oracle.com/javase/tutorial/essential/io/examples/WatchDir.java So, I boot up Eclipse (actually I use STS) and create a new Java project and choose JaveSE-1.7 in the "use an execution environment JRE:". Under the src folder, I copy pasted the WatchDir.java file. And I still see tons of squiggly red lines. All the "import.java.nio.*" are all red and I cannot run it as a Java app. If you read this far, thanks a lot. So, now... What do I need to do? Thanks. EDIT: I actually did not pursue using Java 7 but there are a lot of interest in it and it seems like people keep answering this question. What should I do to make it more relevant to people who search for it? Let me know by PMing me. Thanks.

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >