Search Results

Search found 72650 results on 2906 pages for 'windows key'.

Page 1682/2906 | < Previous Page | 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689  | Next Page >

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• USB Flash Drive Problem!

  - by Daren

  Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

  Read the article

• Relax Linux - it's just me! (filesystem permissions)

  - by Xeoncross

  One of my favorite things about Linux is also the most annoying - file system permissions. In production machines and web servers I love how everything is so secure and locked down - but on development machines it really slows me down. I'll give one example out of the many that I discover weekly. Like most people, I dual-boot Ubuntu and Windows so I can continue using the Adobe CS4 suite. I often design web themes and other things while I'm still using windows. Later I'll boot into Ubuntu to take the themes and write the backend PHP for them. After mounting the windows C: drive partition I can copy the template files over so I can begin editing them. However, thanks to Linux desire to protect me I find that after coping the files I end up with a totally locked set of files where even I don't have read-write permissions. So after carful consideration about the tremendous risks that the HTML files pose to me - I chmod them so that I and apache can begin using them. Now given, the chmod process isn't that hard - but after you chmod enough files per day you get sick of doing it. I'm constantly creating, fetch, editing, and removing files from my user, git repos, php, or other random processes. This is a personal development machine after all. Everything changes on a day by day basis. So my question is, how can I get linux to relax about what I'm doing with my HTML/JS/PHP/TXT/SQL/etc. files so that I can work faster without constantly stopping to chmod things? I pinky-promise I won't hack into my account with an HTML file. ;)

  Read the article

• samba "username map" stopped to work

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

  Read the article

• Selenium server won't start

  - by moff

  I'm getting the following error when trying to start selenium: C:\Temp\selenium-server-1.0.3java -jar selenium-server.jar 22:02:07.615 INFO - Java: Sun Microsystems Inc. 16.0-b13 22:02:07.617 INFO - OS: Windows 7 6.1 x86 22:02:07.625 INFO - v2.0 [a2], with Core v2.0 [a2] 22:02:07.811 INFO - RemoteWebDriver instances should connect to: http://127.0.0. 1:4444/wd/hub 22:02:07.813 INFO - Version Jetty/5.1.x 22:02:07.815 INFO - Started HttpContext[/selenium-server/driver,/selenium-server /driver] 22:02:07.817 INFO - Started HttpContext[/selenium-server,/selenium-server] 22:02:07.818 INFO - Started HttpContext[/,/] 22:02:07.866 INFO - Started org.openqa.jetty.jetty.servlet.ServletHandler@2bbd86 22:02:07.867 INFO - Started HttpContext[/wd,/wd] 22:02:07.870 WARN - Failed to start: [email protected]:4444 Exception in thread "main" org.openqa.jetty.util.MultiException[java.net.SocketE xception: Unrecognized Windows Sockets error: 0: JVM_Bind] at org.openqa.jetty.http.HttpServer.doStart(HttpServer.java:686) at org.openqa.jetty.util.Container.start(Container.java:72) at org.openqa.selenium.server.SeleniumServer.start(SeleniumServer.java:3 96) at org.openqa.selenium.server.SeleniumServer.boot(SeleniumServer.java:23 4) at org.openqa.selenium.server.SeleniumServer.main(SeleniumServer.java:19 8) java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind at java.net.PlainSocketImpl.socketBind(Native Method) at java.net.PlainSocketImpl.bind(Unknown Source) at java.net.ServerSocket.bind(Unknown Source) at java.net.ServerSocket.(Unknown Source) at org.openqa.jetty.util.ThreadedServer.newServerSocket(ThreadedServer.j ava:391) at org.openqa.jetty.util.ThreadedServer.open(ThreadedServer.java:477) at org.openqa.jetty.util.ThreadedServer.start(ThreadedServer.java:503) at org.openqa.jetty.http.SocketListener.start(SocketListener.java:204) at org.openqa.jetty.http.HttpServer.doStart(HttpServer.java:716) at org.openqa.jetty.util.Container.start(Container.java:72) at org.openqa.selenium.server.SeleniumServer.start(SeleniumServer.java:3 96) at org.openqa.selenium.server.SeleniumServer.boot(SeleniumServer.java:23 4) at org.openqa.selenium.server.SeleniumServer.main(SeleniumServer.java:19 8) Java is installed: C:\Temp\selenium-server-1.0.3java -version java version "1.6.0_18" Java(TM) SE Runtime Environment (build 1.6.0_18-b07) Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode, sharing) Thanks in advance

  Read the article

• [URGENT HELP PLEASE]USB Flash Drive Problem!

  - by Daren

  Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

  Read the article

• What could cause a WMV to not play to completion in a browser?

  - by Ty W

  A realtor has had videos created for a community she is selling homes for, the people who made the videos gave them to us in WMV format. I can play these videos without any problem in Windows Media Player, VLC, and Quicktime (via Flip4Mac). I can play the videos from their location at videohomeguide.com in my browser without any trouble. However when I upload the files to our server the video stops at about the 1 minute mark in Safari and FireFox on Mac OS X Snow Leopard. I'm not sure if Windows browsers have the same issue because they are loaded using Windows Media Player. http://carolepaul.com/images/uploads/cottageslsjamestown.wmv <- our server, will fail at 1:09ish. http://www.videohomeguide.com/media/cottageslsjamestown.wmv <- should play to completion (3:27ish) The files generate the same MD5 hash on my desktop and on our server. I used WGET to transfer the files, always downloading from videohomeguide.com. Since the files are identical and are playable using VLC/WMP/Quicktime, and playable in the browsers from videohomeguide.com it seems to me that it is some sort of server config... maybe incorrect headers sent to the browsers? Here are the headers sent and received by FireFox on OS X: http://carolepaul.com/images/uploads/cottageslsjamestown.wmv GET /images/uploads/cottageslsjamestown.wmv HTTP/1.1 Host: carolepaul.com User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.2) Gecko/20100316 Firefox/3.6.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive HTTP/1.1 200 OK Date: Mon, 29 Mar 2010 20:43:20 GMT Server: Apache/1.3.41 (Unix) PHP/5.2.6 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.31 OpenSSL/0.9.8b Last-Modified: Wed, 02 Dec 2009 18:08:46 GMT Etag: "1e7919c-198eadc-4b16ad2e" Accept-Ranges: bytes Content-Length: 26798812 Keep-Alive: timeout=10, max=200 Connection: Keep-Alive Content-Type: video/x-ms-wmv

  Read the article

• samba "username map" stopped to work after upgrade to 3.6

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

  Read the article

• Static Network configuration with bridge in CentOS 6.2

  - by Kyle

  I have a server with CentOS 6.2 installed, I want to use it as a VM host to run some windows installations for development purposes. I wanted to be able to directly RDP and serve websites from IIS on these windows server installations, so I figured I would set it up as bridged networking. I have been struggling with this all morning, usually the result being that when I brought up the bridge interface all network connectivity to the CentOS would go away, however, I think I finally have that all figured out. However, here's what happens. The eth0 and br0 interfaces are defined in /etc/sysconfig/network-scripts with ifcfg-eth0 and ifcfg-br0. I DO NOT have ifup or ifdown or any other files for these interfaces, I have not found if they are needed. I can login and use firefox to browse the web, however, running ifconfig reveals that my eth0 does not have an IPAddress, but the br0 does. I can actually RDP into the Windows installation, and browse the internet from there as well, but I cannot directly connect(via putty, vnc, nor viewing web pages) to the CentOS box. Any idea what's up? ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=192.168.1.20 GATEWAY=192.168.1.1 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes BRIDGE=br0 ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static DNS1=192.168.1.1 DNS2=8.8.8.8 GATEWAY=192.168.1.1 IPADDR=192.168.1.2 NETMAS=255.255.255.0 ONBOOT=yes I know some of the options are inconsistent (DNS and BOOTPROTO) because I tried changing those in the eth0 file to make it work, and the changes haven't adversly affected web browsing or the other functionality Thank you!

  Read the article

• How to uninstall files and software from a Solid State Drive (SSD)

  - by jasondavis

  I am using a SSD drive just as a main Operation system and software drive. I have a regular spinning disk for data files. I have read that files are not REALLY deleted from a SSD drive when you "delete" them. So here is my situation and hopefully I can get some good advice. Let's say I have Windows 7 Pro x64bit installed on my 80gb Intel SSD. I then have Adobe Photoshop CS4 installed along with 50 other programs installed onto this SSD. I then decide I am done with Adobe Phjotoshop CS4 and want to remove it. I then decide I want to install another version of Adobe Photoshop and a few other software titles. Would I just do the usual, add/remove software from the windows control panel. Or if the software being removed has an "Uninstall" program to run, then run it and uninstall the software? I realize that all this WILL remove the software from Windows 7 but I am wanting to know if there is additional steps that should be taken since it is a solid state drive (SSD)?

  Read the article

• I need scanning software to use with my scanner.

  - by D Connors

  So, I got this (HP F4280) printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

  Read the article

• Desktop virtualization

  - by gurpal2000

  Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

  Read the article

• How to prevent samba from holding a file lock after a client disconnects?

  - by Jean-Francois Chevrette

  Here I have a Samba server (Debian 5.0) thats is configured to host Windows XP profiles. Clients connects to this server and work on their profiles directly on the samba share (the profile is not copied locally). Every now and then, a client may not shutdown properly and thus Windows does not free the file locks. When looking at the samba locking table, we can see that many files are still locked even though the client is not connected anymore. In our case, this seems to occur with lockfiles created by Mozilla Thunderbird and Firefox. Here's an example of the samba locking table: # smbstatus -L | grep DENY_ALL | head -n5 Pid Uid DenyMode Access R/W Oplock SharePath Name Time -------------------------------------------------------------------------------------------------- 15494 10345 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user1 app.profile/user1.thunderbird/parent.lock Mon Nov 22 07:12:45 2010 18040 10454 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user2 app.profile/user2.thunderbird/parent.lock Mon Nov 22 11:20:45 2010 26466 10056 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user3 app.profile/user3.firefox/parent.lock Mon Nov 22 08:48:23 2010 We can see that the files were opened by Windows and imposed a DENY_ALL lock. Now when a client reconnects to this share and tries to open those files, samba says that they are locked and denies access. Is there any way to work around this situation or am I missing something? Edit: We would like to avoid disabling file locks on the samba server because there are good reasons to have those enabled.

  Read the article

• Improving browser performance while using lots of tabs?

  - by Andrew

  My browsing habits cause me to open lots of windows and tabs, either related to different projects I'm working on or things I may want to read later. I use OSX and use about 5 spaces with multiple windows in each space. The problem is eventually I'll have around 200 or more tabs open (spread over 15-20 windows) that I don't want to close. Needless to say, my computer's performance starts to degrade. As I write this on my mobile, Safari on my laptop is locking up the computer. I used to use Chrome but found better performance with Safari. What I'd like to know, is there a graph of browser performance based on tab usage? I don't need a browser that keeps all tabs active. It would be great if the browser could increase performance by "putting tabs to sleep". Or if there was some sort of tool for saving a "workspace" of tabs that you could reactivate the next time you are working on that project. What sort of solution can you recommend to solve this problem?

  Read the article

• Apple Mac OS X Mavericks inside Virtual Box

  - by John Sonderson

  I have a few questions regarding Mac OS X and OS virtualization. A. Given all the legal restrictions imposed by Apple on Apple products, I would like to know whether it is legal to install the new and freely downloadable Apple Mac OS X Mavericks inside Oracle Virtual Box. B. What about older OS X versions such as Mountain Lion? C. How many machines can I install it on. What if I don't use the Mac to which the OS is downloaded but only use it on Virtual Box, and prefer to, say, install Linux on the Mac computer so that it doesn't become unusable due to the single user license policy and me running the OS on Windows 7 within Virtual Box? D. I have a PC running Windows 7 but would like to get the OS off a second had Mac I'm planning to purchase for this purpose. How must we proceed to copy the OS to an ISO so that I can install it on Windows 7? I am unfamiliar with Macs and do not know what software to use for the purpose, nor where the OS is downloaded to (as an ISO, .app executable, .gz or .zip file or whatever). If anyone could provide some guidance with the process I would sincerely appreciate it. Thanks.

  Read the article

• SQL Server 2008 Web VS SQL Server 2008 Enterprise

  - by Jeremy

  I wrote an application a few months ago, and was hosting it out of our offices on a workstation with an Intel Core 2 Quad Q8200 @ 2.33GHz, 8 GB RAM, Windows Server 2008 Enterprise and SQL Server 2008 Enterprise. Both the webserver and database server were run on the same machine. We had a huge influx in traffic, and moved ClubUptime.com, and got 2 of their top teir windows VMs. The Database server runs Windows 2008 R2 Standard and SQL Server 2008 R2 Web on 8 GB ram and an Intel Xeon e5620 @ 2.40GHz. Ever since switching, the database which used to run at around 400MB in RAM now runs at around 4-7GB, and there haven't been any changes to it (other than a couple columns here and there). Our traffic has quadrupled, and our DB is 6 GB on disk, why would SQL server take up 7 GB if the DB is only 6. And why would it be storing the ENTIRE database in memory? Another thing is why growing 4 times in size did the database's memory footprint grow 12 times? Last question: Why does the CPU peg at 100% now where it didn't before? The design is simple, VERY few joins, NO subqueries. I am just at a loss, unless it is the SQL server edition, or the fact that I moved from real hardware to a VM.

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• AVCHD MTS h264 1080p file with choppy playback in Linux

  - by marc

  When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

  Read the article

• Hardware doesn't work some times

  - by Ali

  I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

  Read the article

• pdftotext not outputting hebrew characters

  - by Ofri Raviv

  I'm using Xpdf's pdftotext to get the text out of some hebrew pdf files on Ubuntu. On my local machine this worked fine. I then tried to do it on another machine and the hebrew characters don't show up in the text file. I verified that I have the language package (see below why I think so). Where else can I look for the problem? >> tail -2 /etc/xpdf/xpdfrc include /etc/xpdf/includes >> cat /etc/xpdf/includes # This file was automatically generated by /usr/sbin/update-xpdfrc. # Instead, add or remove files in /etc/xpdf/ then run # /usr/sbin/update-xpdfrc to regenerate this file. include /etc/xpdf/xpdfrc-latin2 include /etc/xpdf/xpdfrc-thai include /etc/xpdf/xpdfrc-greek include /etc/xpdf/xpdfrc-turkish include /etc/xpdf/xpdfrc-arabic include /etc/xpdf/xpdfrc-hebrew include /etc/xpdf/xpdfrc-cyrillic >> cat /etc/xpdf/xpdfrc-hebrew #----- begin Hebrew support package (2003-feb-16) unicodeMap ISO-8859-8 /usr/share/xpdf/hebrew/ISO-8859-8.unicodeMap unicodeMap Windows-1255 /usr/share/xpdf/hebrew/Windows-1255.unicodeMap #----- end Hebrew support package >> ls /usr/share/xpdf/hebrew/ ISO-8859-8.unicodeMap Windows-1255.unicodeMap

  Read the article

• Have only read access to Samba

  - by Tahir Malik

  Hi I've been struggling a lot with Samba on Centos 5.5 lately. I develop in Windows 7 and send files through scp (ant task), but it's to slow and wanted to setup thoroughly samba. After installing and following some guides I've done the following: Disable firewall (iptables) Disable SelLinux (didn't do that at the start, but didn't help either) setup my smbusers file to map my windows user to root (root = "Tahir Malik" -- works) added a current user mitco to the sambapassdb with the command smbpasswd -a mitco , because the windows user had only read access So both the users have read access to my share. Here is my smb.conf snippit: [global] workgroup = MITCO server string = Samba Server Version %v netbios name = centos ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24 ; hosts allow = 127. 192.168.12. 192.168.13. [alf4] comment = Alfresco 4 path = /opt read only = no valid users = mitco, mitco force user = root force group = root admin users = mitco , mitco writeable = yes ; browseable = yes What also maybe important is that the /opt is only writable by root, but that shouldn't matter because I use the force user and group or admin users. The log file : [2012/09/29 07:43:44, 0] smbd/server.c:main(958) smbd version 3.0.33-3.39.el5_8 started. Copyright Andrew Tridgell and the Samba Team 1992-2008 [2012/09/29 07:43:59, 1] smbd/service.c:make_connection_snum(1085) mitco-tahir (192.168.13.1) connect to service alf4 initially as user root (uid=0, gid=0) (pid 5228)

  Read the article

• How to copy mailboxes from Exchange 2003 to Exchange 2007 across forests?

  - by Tor Ivar Larsen

  Hi. Were going through a quite difficult conversion from an old ASP-solution to an entirely new one. This includes moving mailboxes from Ex2003 to Ex2007. We want to do this without deleting the old mailboxes on the Ex2003 server, to have a "fall back" in case somehing goes wrong. I have investigated the "Move-Mailbox" cmdlet in the Ex2007 shell, and it seems to fit our needs quite well. The only problem being that we want to keep the old mailboxes. This could easily be accomplished with the -SourceMailboxCleanupOptions, but we can't use this when we have used the -AllowMerge switch. The reason we need -AllowMerge is because all the user accounts with connected mailboxes are already created on Ex2007(Some automatic user creation tool, no real relevance to the case in question) The twist is that the exchange servers are in two different forests... Windows 2003 SP1 on DC1, Windows 2003 SP2 on DC2 in forest 1. Windows 2003 R2 SP2 on DC1 in forest 2. Can we use the Move-Mailbox safely for this purpose? And if yes, how?

  Read the article

• How to route public static IP to a virtual machine on a vmware ESXi host?

  - by Kevin Southworth

  I have 5 static IPs from my ISP (Comcast) and I have a physical machine with VMware ESXi 4.0 on it that is hosting multiple virtual machines. Right now I am just using the default vmware virtual network (vswitch0) with DHCP from the Comcast IP Gateway Router and everything is working fine. Each virtual machine can access the internet, etc. One of my virtual machines is a webserver (Windows Server 2008) and I want to assign it to 1 of my 5 static IPs so it's accessible from the public internet, while leaving the other VMs on the internal LAN still using DHCP. If I just plug my laptop directly into the Comcast IP Gateway (it has 4 ports on the back) and assign my laptop a Static IP using the windows networking dialogs, then I can hit my laptop from the public internet and it works great. However, if I try to do the same steps to set a static IP config on my Windows Server 2008 VM, it does not work. The VM cannot access the internet (open Firefox and try to visit google.com), and I cannnot see the VM from the public internet either. I'm assuming I'm missing something in the ESXi config somewhere, but I'm pretty new to ESXi and I'm not sure how to configure it to work this way.

  Read the article

• Rsync Push files from linux to windoes. ssh issue - connection refused

  - by piyush c

  For some reason I want to run a script to move files from Linux machine to Windows. I have installed cwRsync on my windows machine and able to connect to linux machine. When i execute following command: rsync -e "ssh -l "piyush"" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" Where 10.0.0.60 is my widows machine and I am running above command on Linux - CentOS 5.5. After running command I get following error message: ssh: connect to host 10.0.0.60 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8] [root@localhost sync]# ssh [email protected] ssh: connect to host 10.0.0.60 port 22: Connection refused I have modified my firewall settings on widows to allow all ports. I think this issue is due to SSH Daemon not present on my windows machine. So I tried installing OpenSSH on my machine and running ssh-agent but didn't helped. I tried similar command to run on my widows machine to pull files from Linux and its working fine. For some reason I want command for Linux machine so that I can embed it in a shell script. Can you suggest me if I am missing anything.

  Read the article

• Remote desktop type software that the client need not install anything...

  - by allentown

  I am primarily a Macintosh user, and can usually walk a client though any troubles they may have because I have a Macintosh in front of me. If they are on a different OS, things are close enough, or I cam remember, that I can get by. When trying to help clients on Windows, I get stuck. I do not have access to windows, and even if I did, there are far too many versions of Outlook, all with their various esoteric settings and checkboxes, that I could never see exactly what they are seeing. I mostly need to just help them with email setup. Something like copilot.com may do the trick. What is the simplest remote control software out there, ideally, it would accomplish these: No software needed on remote end, or, a single .exe that they can toss when done. I need Mac based software on my end. I do have ARD, which support VNC Free :) If possible, it would be really nice Needs a port forwarding proxy run by the company. There is no way I can get the user to alter their router, or to even plug directly into their WAN for a short time. On the Mac, I just have them open iChat, and this is all built in, proxying through AIM, looking for the same for Windows and Mac.

  Read the article

< Previous Page | 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689  | Next Page >