Search Results

Search found 1232 results on 50 pages for 'aaron kyle'.

Page 17/50 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• What is this Cable for? 4 Pin to 2 Pin from Riser to Perc in Dell R410

  - by Kyle Brandt

  I got a new raid card for a R410 server since the S300 that came with it doesn't support raid with Linux (No work around for this if SAS from what I could find). Anyways, the RAID card has 2 pins on it and there is a cable that that connects to a 4 pin connection on the riser. The cable only has two wires, one black and one red. What is this cable for? My guess would be maybe LED status for the front panel or something like that, but I am just guessing....

  Read the article

• Wireless to Wireless Transfer Slow on a Linksys WRT54GL

  - by Kyle Brandt

  The Situation: When I try to transfer a file from one computer to another that are both connected via wireless on a WRT54GL (in a office) with dd-wrt firmware I often get bad speeds. In generally they average around 100 kilobytes a second. Either computer can download via wireless from the Internet at at about 2 megabytes a second. The speed is slow with the transfer of one large file. There are about 20 other wireless networks that the computers can see, so there is a lot of noise, but I don't have the equipment to really monitor the frequencies well. But that still seems pretty slow. I thought maybe it was the transmit on each card, but even when they are 5 feet away with a line of sight I still get these speeds. According to Linux both cards are operating at 54g. My Questions: Is this normal for this sort of consumer level wireless equipment? Anything I can do to improve it? why is wireless to wireless transfer slow when everything else isn't? Whats steps might I take to figure out what is happening? For example, are lots of packets not making to the access point requiring retransmissions? Above all, I want to find out what the problem actually is. This may seem odd, but at this point I am more interested in understanding what the problem is than fixing it. What I have tried: I have tried messing with lots of settings. Different channels, xmit power, G-Only, none of which has made anything any better. I've also tried upgrading to newer dd-wrt firmware version and doing a reset to wipe out the settings.

  Read the article

• Public folder not visible from front end Exchange 2003 Server

  - by Kyle Brandt

  I have a public folder that does not receive emails when the emails are sent via the Front-End Exchange Servers. When I go into the System Manager on the Front-End I don't see this particular public folder listed under the Public Folders. However, I do see it listed from the Front-End server. I see the emails that are not making it to the public folder listed in the local delivery queue on the front end server and they are in a retry state. Does anyone know how I might troubleshoot this?

  Read the article

• No architecture vs architecture-specific binaries

  - by Aaron

  From what I understand, the noarch suffix means that it's architecture independent and should work universally. If this is the case, why should I install architecture-specific packages at all? Why not just go straight for the noarch? Are there optimizations in the x86 or x64 binaries that aren't found in the noarch binaries? What's best for high performance applications? Folding@Home does this with their controller:

  Read the article

• *nix shell with IOS style completion?

  - by Kyle Brandt

  Is there a Linux shell that will let you type less than full commands as you can with Cisco IOS, at least for the first command (and not its arguments)? I haven't really thought enough if this is actually a good thing, but might be fun to play with :-)

  Read the article

• Can you zip a file from command prompt?

  - by Aaron Bush

  I have a batch file that outputs a text file. I thought it would be nice if I could zip it up too. This will be used in an uncontrolled environment so I can't make assumptions about the presence of 3rd party software products such as 7-Zip etc. This needs to use Window's now-built-in capability to zip files.

  Read the article

• Error- D:\ is not accessible. Access is denied

  - by Aaron

  All of the sudden the D drive gives me an error when I try to open it: D:\ is not accessible. Access is denied. I have files on the drive that I would like to recover, so I do not want to reformat the drive. It acts almost like the computer doesn't recognize the drive. I have a feeling it's something with security settings, I may have accidentally changed something on the drive. I'm running on a Acer Aspire laptop on Windows Vista, SP2. I beleive both the C and the D drive run off of the same disk drive. At least that's all the Device Manager shows. So correct me if I'm wrong, but that would make it a partitioned drive.

  Read the article

• Datacenter Colocation Phone

  - by Kyle Brandt

  In my cage I don't get good enough phone reception. An phone that goes over the network also doesn't seem ideal for when I am working on the network. Do you people have traditional phones delivered to their cage? I'm wonder what my options are.

  Read the article

• lighttpd config and rewriting/disabling attempts to access favicon.ico

  - by Kyle

  I've got lighttpd and apache working together on an app I'm building. lighty is serving out static content. However, each time a static asset is requested, I see a not found: favicon.ico message in the logs. I have added the following url rewrite: url.rewrite-once = ( "^/favicon.ico$" => "/assets/images/favicon.png" ) But to no avail; still getting the message. Any ideas?

  Read the article

• publickey authentication only works with existing ssh session

  - by aaron

  publickey authentication only works for me if I've already got one ssh session open. I am trying to log into a host running Ubuntu 10.10 desktop with publickey authentication, and it fails when I first log in: [me@my-laptop:~]$ ssh -vv host ... debug1: Next authentication method: publickey debug1: Offering public key: /Users/me/.ssh/id_rsa ... debug2: we did not send a packet, disable method debug1: Next authentication method: password me@hosts's password: And the /var/log/auth.log output: Jan 16 09:57:11 host sshd[1957]: reverse mapping checking getaddrinfo for cpe-70-114-155-20.austin.res.rr.com [70.114.155.20] failed - POSSIBLE BREAK-IN ATTEMPT! Jan 16 09:57:13 host sshd[1957]: pam_sm_authenticate: Called Jan 16 09:57:13 host sshd[1957]: pam_sm_authenticate: username = [astacy] Jan 16 09:57:13 host sshd[1959]: Passphrase file wrapped Jan 16 09:57:15 host sshd[1959]: Error attempting to add filename encryption key to user session keyring; rc = [1] Jan 16 09:57:15 host sshd[1957]: Accepted password for astacy from 70.114.155.20 port 42481 ssh2 Jan 16 09:57:15 host sshd[1957]: pam_unix(sshd:session): session opened for user astacy by (uid=0) Jan 16 09:57:20 host sudo: astacy : TTY=pts/0 ; PWD=/home/astacy ; USER=root ; COMMAND=/usr/bin/tail -f /var/log/auth.log The strange thing is that once I've got this first login session, I run the exact same ssh command, and publickey authentication works: [me@my-laptop:~]$ ssh -vv host ... debug1: Server accepts key: pkalg ssh-rsa blen 277 ... [me@host:~]$ And the /var/log/auth.log output is: Jan 16 09:59:11 host sshd[2061]: reverse mapping checking getaddrinfo for cpe-70-114-155-20.austin.res.rr.com [70.114.155.20] failed - POSSIBLE BREAK-IN ATTEMPT! Jan 16 09:59:11 host sshd[2061]: Accepted publickey for astacy from 70.114.155.20 port 39982 ssh2 Jan 16 09:59:11 host sshd[2061]: pam_unix(sshd:session): session opened for user astacy by (uid=0) What do I need to do to make publickey authentication work on the first login? NOTE: When I installed Ubuntu 10.10, I checked the 'encrypt home folder' option. I'm wondering if this has something to do with the log message "Error attempting to add filename encryption key to user session keyring"

  Read the article

• Pasting extended ACL contents into telnet session to Cisco Router SIM

  - by Kyle Brandt

  I have a telnet session to a dynamips router sim. When I try to paste the contents of an actually working ACL retrieved from 'show run' into the access list, only part of gets pasted. The session is something like: enable conf t ip access-list extended Internet <PASTE of Rules> It stops right in the middle of a line: permit tcp any host 123.123.123.123 gt 1 ! should be gt 1023 Anyone know what is happening? The source is an extended access list.

  Read the article

• Can't Mount Databases in the Recovery Storage Group in Exchange 2003

  - by Kyle Brandt

  After restoring some mail stores, mounting them in the recovery storage group errors out. So far a repair with eseutil (which the log says was successful) and a server reboot has been tried. A defrag is currently running on the mail store I need to go through this again to post the exact error codes, so I will be updating this question. But I thought someone who does this a lot might have a "More times than not..." answer in the meantime.

  Read the article

• Encrypting traffic on remote end of SSH tunnel

  - by Aaron

  Using an example of someone connecting to a VPS, an SSH tunnel will encrypt any traffic coming from the user to the VPS. Once it reaches the VPS network, the traffic is not encrypted and is easily sniffable by network administrators on that particular network. (am I understanding all that correctly?) Is there a way to have the traffic encrypted on both ends so that neither side is susceptible to packet sniffing to reveal what kind of data/traffic/protocol is being transmitted?

  Read the article

• How do I compile mercurial 1.5.2 on debian?

  - by Aaron Digulla

  I downloaded the files for Mercurial 1.5.2 from http://packages.debian.org/sid/mercurial (mercurial_1.5.2-1.debian.tar.gz, mercurial_1.5.2-1.dsc and mercurial_1.5.2.orig.tar.gz). How do I get a .deb package out of these? I tried to follow the instructions at http://www.debian.org/doc/maint-guide/ch-build.en.html but they don't work. I tried to unpack the two archives and run dpkg-buildpackage or debian/rules build but that fails with: dh --with quilt clean dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory `/home/user/packages/mercurial-deb' cp -a mercurial/__version__.py mercurial/__version__.py.save cp: cannot stat `mercurial/__version__.py': No such file or directory make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory `/home/user/packages/mercurial-deb' make: *** [clean] Error 2 That's because the directory mercurial is inside mercurial_1.5.2/. Why doesn't the build script cd into the right place? If I try ../debian/rules build, I get dh --with quilt build dh: cannot read debian/control: No such file or directory sigh How do I compile a package for debian???

  Read the article

• Sendmail Tuning For Batch Mail Jobs

  - by Kyle Brandt

  I have a webservers that send out emails to a sendmail relay server as a batch job. The emails need to be accepted by the relay sendmail server as fast as possible, however, they do not need to go out (be relayed) very quickly. I am seeing a couple timeouts once and a while from the webserver trying to connect to the relay server. The load currently is about 30 emails a second for a couple minutes. There are quite a few tuning options for sendmail in the sendmail tuning guide. What I am focusing on now is the Delivery Mode: Delivery Mode There are a number of delivery modes that sendmail can operate in, set by the DeliveryMode ( d) configuration option. These modes specify how quickly mail will be delivered. Legal modes are: i deliver interactively (synchronously) b deliver in background (asynchronously) q queue only (don't deliver) d defer delivery attempts (don't deliver) There are tradeoffs. Mode i gives the sender the quickest feedback, but may slow down some mailers and is hardly ever necessary. Mode b delivers promptly but can cause large numbers of processes if you have a mailer that takes a long time to deliver a message. Mode q minimizes the load on your machine, but means that delivery may be delayed for up to the queue interval. Mode d is identical to mode q except that it also prevents lookups in maps including the -D flag from working during the initial queue phase; it is intended for ``dial on demand'' sites where DNS lookups might cost real money. Some simple error messages (e.g., host unknown during the SMTP protocol) will be delayed using this mode. Mode b is the usual default. If you run in mode q (queue only), d (defer), or b (deliver in background) sendmail will not expand aliases and follow .forward files upon initial receipt of the mail. This speeds up the response to RCPT commands. Mode i should not be used by the SMTP server. I currently have the CentOS default modes: Sendmail.cf: DeliveryMode=background Submit.cf: DeliveryMode=i Is sendmail.cf/mc for outgoing email from relay (to the intertubes) and sumbit.cf/mc for incoming eamil (from my webservers). Would it make sense to change the outgoing delivery mode to queue? If I did, what would the outbound email flow behave like? If this is the right thing to do, can anyone show me example mc configurations for this change? If it isn't, what recommendations are there for these constraints?

  Read the article

• TTL for PTR records on Windows 2003 Server DNS

  - by Kyle Brandt

  When I look at the TTL (Time to Live) for PTR records (Reverse Lookup Zone) on one of our Windows 2003 DNS servers I see some are at 15 minutes, others are at 20. They have "Delete this record when it becomes stale" checked. These PTR records are for workstations that get IPs from Windows DHCP, so I think that creates the PTR records dynamically? How is TTL for these records set?

  Read the article

• How to use ipw3945 on Ubuntu 9.04

  - by Aaron

  Note: uname -a 2.6.28-16-generic cat /etc/issue Ubuntu 9.04 \n \l I have disabled iwl3945: cat /etc/modprobe.d/blacklist.conf | tail -3 blacklist iwl3945 blacklist mac8021 Question: How can I use iwp3945 instead?

  Read the article

• Text comparison utility

  - by Aaron

  I know this has been asked before...but I have a spin as I have been trying out varying free software offerings. I want to rid out department of DiffDoc the problem is that I am having trouble locating something that will do what we need. WinMerge has been the latest attempt... The problem is simple. One Word doc...one PDF with a portion of it containing the text to be compared against. Compare them and be done. Raw text, ignore whitespace, ignore carriage returns, etc... Just compare the text and give me the results in some sort of report. NOTE: Have tried ExamDiff, kdiff3, Tortoise, and a few others...

  Read the article

• From 0 to MVP in 4 weeks

  - by fatherjack

  You may know from my previous posts that I have just started a local SQL Server User Group. 3 weeks ago there was no such group within 100 miles and then we had a meeting. Now, in eight days time, there is going to be a second meeting and I am very excited to be able to say that we will be having an MVP speaker for one of the sessions. Aaron Nelson (Blog|Twitter) made an incredibly generous offer of speaking for us on using PowerShell with SQL Server and I didn't hang around before I said "Yes...(read more)

  Read the article

• Remove Audio stream from XVID files

  - by Kyle Brandt

  I have a bunch of Xvid files that each have an audio stream that I do not want. How can I strip the audio track I don't want using the Linux command line? I don't need the whole script (loop), just what command I would use to process each avi file individually (unless the cmd itself has batch modification built into it). I don't believe the file is in an mkv container, as mkvinfo doesn't find anything. Here is part of mplayer's output (thanks ~quack): [aviheader] Video stream found, -vid 0 ID_AUDIO_ID=1 [aviheader] Audio stream found, -aid 1 ID_AUDIO_ID=2 [aviheader] Audio stream found, -aid 2 VIDEO: [XVID] 512x384 12bpp 25.000 fps 1013.4 kbps (123.7 kbyte/s)

  Read the article

• Windows Live Writer Code Snippet Plugin

  - by schnieds

  I love Windows Live Writer as a blogging application and use it pretty much exclusively for writing my blog posts. The only downside is that I have found it difficult to get code snippets formatted correctly in my posts. Luckily a friend of mine, Tyson Swing, turned me on to a great code snippet plugin for Windows Live writer.[Read More]Aaron Schniederhttp://www.churchofficeonline.com

  Read the article

• Elastic Load Balancer & SSL termination

  - by Aaron Scruggs

  I am setting up a Rails app on AWS that: 1) all traffic must ssl encrypted 2) will highly fluctuate in traffic on a weekly basis 3) will by maintained by someone that is a stronger coder than sysadmin, but will be responsible for both I am thinking that SSL termination on an elastic load balancer backed by small ec2 instances running nginx and unicorn A small subset of the requests will take longer than 10s, because of this I am also debating using 'thin' instead of 'unicorn'. My question is this: Is this sane? I am stepping into a quagmire of cost, maintainability, security or performance problems?

  Read the article

• Windows 2008 R2 Servers Sending Arp Requests for IPs outside Subnet

  - by Kyle Brandt

  By running a packet capture on my my routers I see some of my servers sending ARP requests for IPs that exist outside of its network. For example if my network is: Network: 8.8.8.0/24 Gateway: 8.8.8.1 (MAC: 00:21:9b:aa:aa:aa) Example Server: 8.8.8.20 (MAC: 00:21:9b:bb:bb:bb) By running a capture on the interface that has 8.8.8.1 I see requests like: Sender Mac: 00:21:9b:bb:bb:bb Sender IP: 8.8.8.20 Target MAC: 00:21:9b:aa:aa:aa Target IP: 69.63.181.58 Anyone seen this behavior before? My understanding of ARP is that requests should only go out for IPs within the subnet... Am I confused in my understanding of ARP? If I am not confused, anyone seen this behavior? Also, these seem to happen in bursts and it doesn't happen when I do something like ping an IP outside of the network. Update: In response to Ian's questions. I am not running anything like Hyper-V. I have multiple interfaces but only one is active (Using BACS failover teaming). The subnet mask is 255.255.255.0 (Even if it were something different it wouldn't explain an IP like 69.63.181.58). When I run MS Network Monitor or wireshark I do not see these ARP requests. What happens is that on the router capturing I see a burst of about 10 requests for IPs outside of the network from the host machine. On the machine itself using wireshark or NetMon I see a flood of ARP responses for all the machines on the network. However, I don't see any requests in the capture asking for those responses. So it seems like maybe it is maybe refreshing the arp cache but including IPs that outside of the network. Also when it does this NetMon doesn't show the ARP requests?

  Read the article

• How to obtain a count of open files from server, hosting an NFS share

  - by Aaron

  Question: How to obtain a list/count of open files, by NFS clients, from NFS server on Solaris 10

  Read the article

• Recommendations for handling Directory Harvesting spam on Exchange 2003

  - by Aaron Alton

  Our Exchange server is getting slammed with anywhere between 450,000 and 700,000 spam messages per day. We receive about 1700 legitimate messages in the same time frame. Roughly 75% of the spam is directory harvesting. We currently have GFI MailEssentials installed. To it's credit, it's doing a very good job, but the sheer volume of spam that we're receiving, and the number of connections that our exchange server is making is preventing legitimate email from being delivered in a timely manner. GFI is set up to check for directory harvesting at the SMTP level, which I presume intercepts the mail before it hits the Exchange services , or goes through SMSE. This "module" is ordered at the top of the list, so (hopefully) dealing with the harvesting is consuming a minimum amount of server resources and bandwidth. My question is, is there anything I can do to prevent our Exchange server's connection pool from being eaten up by these spam hosts? We had to limit the number of concurrent connections being made by Exchange, because it was consuming all of our bandwidth. Thanks, in advance.

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >