Search Results

Search found 8190 results on 328 pages for 'switch'.

Page 170/328 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• Internet sharing over LAN on Windows Server 2012

  - by USER

  I have a DSL modem connected to a server (ON NIC1) running Windows Server 2012 and 7 computers (running Windows 7 32-Bit) connected to a server though a network switch (ON NIC2). I shared the internet connection from the server through DHCP so I am able to access the internet from those 7 computers, but I am unable to: Access Google.com Activate Windows Update Windows An error is arising that says UNABLE TO ACTIVATE WINDOWS Activation Error Code: 0x80072EE2 Firewall and Anti-Virus are off on both the Server and the Clients. Is there is any additional setting that I want to do?

  Read the article

• Change base language of Windows 8 Installer

  - by Firedragon

  I have access to Dreamspark and Windows 8. When I picked the version I picked English which is fine, but it is US English however I realised I should have picked UK English instead. You are only allowed one version so i cannot switch it. Now, I can change the language pack later to UK English but in the language bar US English is always listed and seems impossible to remove and system restore reverts to US English. Is there a way to fully change the base language to UK in the installer, so in effect makin the installer offer US and UK English, or just UK English as if I had chosen the correct version?

  Read the article

• Tool to allow Kerberos Authenticated users to modify Firewall settings

  - by Lars Hanke

  I run a firewall on a central router. Recently, several users want to use Skype. Since firewalling Skype virtually means to switch the firewall off, I consider to allow users to temporarily punch holes for their system. Since the users have no accounts on the router, I consider using Kerberos for authentication and authorization. The router is a Debian Squeeze box, with minimal configuration, i.e. no web-server, database or similar gimmicks. Does anyone know an existing solution, which could be used for that purpose? Or does anybody know easy to use and well documented frameworks in say Perl, Python, C, C++, ... making the set-up of a Kerberos authenticated Client and Server application really simple?

  Read the article

• With Bash + iTerm2, how to name tabs?

  - by Problemaniac

  In iTerm2 (Build 1.0.0.20120203), I typically open several tabs, each of which has split panes , and is about one particular theme of work, for example revision control, coding, managing files, mysql terminal work. I typically need to switch between 5 or more tabs in my work flow. It is sometimes hard to remember or tell which is which by looking at the content of the screen. I'd like to name the tabs somehow, so I can quickly tell which is which by quickly glancing. Is this possible?

  Read the article

• Excel - Chart that sums the values in multiple rows for each series

  - by Chaulky

  Suppose I have a spread sheet that looks something like this... Now, I'd like to create a column chart that has 3 series, one for each country. Then, I want series for each category, but I want to plot the total, not each individual order total. So, something like this (excuse the horrible artwork)... The data label placement isn't all the important, the key is that for each Category (Bikes and Clothes) I chart the total for each country, not individual values from the "Order Total" column. Is this possible? Is it possible to do the same idea, but to switch Country and Category around?

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• How failover should work in IIS cluster with Application Request Routing?

  - by username

  I have set up several servers with IIS and connected them to the load balancer - server with installed IIS Application Request Routing. I have created a server farm and added two servers. Then I stopped IIS on the first server and tried to open my web site. It returned me an error: 502 - Web server received an invalid response while acting as a gateway or proxy server. But if instead of stopping IIS I shut down the first server, I'm getting a response from the next server which is online. The question is, what the expected behaviour should be for failover with ARR, should it switch me to the next server if IIS is stopped and server is online?

  Read the article

• tricks for speeding up tar while tarring up a huge directory of little files?

  - by Trevor Harrison

  I'm trying to tar up a directory that has about 3M tiny files in it. Tar is chugging along, but I'm thinking its going to take longer than I can wait. I'm wondering if telling tar to not store metadata (owner, group, perms) would reduce the churn on reading and re-reading this huge directory and maybe speed things up, and if there is a tar switch that does this. My initial perusal of the man page only gets me something like --no-xattrs, which looks like a start, but I was hoping someone had some specific knowledge.

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• is using Hosts for resolving a sql-server more performant?

  - by Ice

  Hi, we have a legacy application which uses a access.mdb with hundreds of ODBC-connected tables on a sql-server. the access.mdb contains nothing else than these odbc-connections. Now we consider to use a virtual sql-servername for these odbc connections and resolve it in the local hosts-file with the ip-address of the real sql-server. Like this we can easy switch between a test-sql-database server and the the server for production in changing one single entry in the hosts. EVERYTHING works fine and now comes the question: Could it be that this is more performant because there is one single point on resolving the sql-server (name or ip-address)? Is there something like a network-cache / DNS-Cache? peace Ice

  Read the article

• Is it possible to group chrome extension processes?

  - by Shajirr

  I have a problem with Chrome - most extensions, even those which consume merely 5-10 MB of memory, each have their own process, and because of that Chrome uses a single process for all the tabs, which consume a lot more memory compared to extensions, even with --proccess-per-tab switch. This behavior seemes illogical - why do you need extensions in separate processes if you can't use your browser properly when it takes 5-10 seconds just to load a tab and freezes constantly? Is it possible somehow to limit the number of processes which can be used for extensions, maybe group them to 10 extensions per 1 process?

  Read the article

• Explaining svn / apache permissions error? (I know "how" but not "why")

  - by Neil

  I have the following error occurring on occasion when trying to do an svn switch (have it set up to do via a web request): svn: Can't open file '/root/.subversion/servers': Permission denied This happens after an apache httpd.conf change and corresponding restart. How to fix this? I can get it to fix by doing an apache restart - BUT, it often takes multiple tries. Curious if anybody can explain this. Why did this error go away on my 8th apache restart, but not on the prior ones (with no edits to the conf file)? Basically, I kind of have a "how" in terms of solving this, but I don't have a "why" . . . Thanks!

  Read the article

• Transfer disk image to larger/smaller disk

  - by forthrin

  I need to switch the hard drive on a 2006 iMac to a new SSD. I don't have the original installation CDs. I know I can order CDs from Apple, but this costs money. Someone told me it's possible to rip the image of the old drive and transfer to the new drive. If so, does the size of the new drive have to be exactly the same as the old? If not, my questions are: Is it possible to "stretch" the image from 120 MB disk to a 256 MB disk (numbers are examples)? If so, what is the command line for this? Likewise, is it possible to "shrink" an image from a larger disk (eg. 256 MB) to a smaller disk (eg. 120 MB), provided that the actual space used on the disk does not exceed 120 MB? How do you do this on the command line?

  Read the article

• Screen tail -f window closes immediately

  - by t.heintz

  I have this in my ~/.screenrc file: startup_message off screen -t top 0 top screen -t log 2 tail -f /path/to/application/log/* screen -t action 1 #caption always "%?%F%{.R.}%?%3n %t%? [%h]%?" hardstatus alwayslastline "%-Lw%{= BW}%50>%n%f* %t%{-}%+Lw%<" When I start screen, it opens all three windows, but as soon as I try to switch to window 2, it closes immediately. I would assume there is a problem with the shell and it exits instantly, but I can't find anything wrong with it. I have tried using quotation marks around the path and the entire command, which only leads to "file not found" errors. The command works just fine when I enter it directly into a shell. The screen version is: Screen version 4.00.02 (FAU) 5-Dec-03 Help?

  Read the article

• Xmodmap: six characters to one key and two layouts?

  - by sup

  I know how to have six symbols on one key thanks to this question: Xmodmap: Six characters to one key? However, when I have two layouts and switch them, weird things happen. I have the following (well, different, but this is easier to talk about) line in my xmodmap: keycode 31 = a A b B c C When I log in, everything works as you would expect. Pressing key 31 give a, with Shift A, with AltGr c and C respectively and with ISO_Level3_Shift. However, when I change the layout, key 31 gives me b and B with shift and c and C with AltGr. This is on Ubuntu 11.10 under Ubuntu. Does anybody undestand what is happening? Could I restrict xmodmap to just one layout?

  Read the article

• Password not accepted when resuming from sleep

  - by Comrade

  My HP Pavilion dv-series notebook will not accept the user account password for the logged in user when resuming from sleep - message returned is Incorrect Password. Simply selecting the Switch User option reloads the login screen and allows me to log in as the same user with the same password that was originally rejected. And, yes I've tried it more than one (hundred) times in case you were thinking it's just a case of slippery fingers. Another interesting point is that it appears to be independent of the software running on the machine. Since the issue first appeared, I have done two clean installs where all HD partitions were wiped and new ones created during fresh installation of the OS. The first such clean install was of Ubuntu (Lucid) 10.04 amd-64, the second of Win 7 Pro 64 (from boxed disc and activated post install). Exactly the same symptoms, described above, are exhibited on both platforms. Have engaged in significant amount of Googling an come up empty so any ideas are welcome.

  Read the article

• Remove dual boot screen

  - by DoubleP90

  some time ago i bought an SSD and since i had to reinstall windows i bought windows 8 with it. I kept windows 7 on my old HDD and i installed Windows 8 on the SSD. For some time i had both, and a dual boot screen would allow me to switch between them. But now i deleted the windows 7 partition and merged it to the partition where i keep all my files, movies etc. But i still have the dual boot screen showing up with windows 8 and windows 7 options. How can i remove the dual boot screen and just make it boot to windows 8?

  Read the article

• Migrating from Desktop PC to real Server

  - by tevlon84

  i am a student, working as a part-time Administrator at a startup. I never ever used a real Server ( only a Desktop Pc with apache ) The Company i am working for is growing and they want to switch to a real Server. My idea would be to use the Ubuntu build-in Backup function and use this Backup file as Base for the Rack-Server, but i don't know, which problems i would run into. Is it a good idea ? So basically my question is : *What is the easiest way to migrate from a Desktop PC to a real Rack-Server? ( on an Ubuntu Server) *

  Read the article

• Remotely enter encryption key?

  - by Jason Swett

  This might be a really dumb question but here goes, anyway. I just bought a couple servers. I already installed Ubuntu with encrypted LVM on one and I'm planning on doing the same with the other. This means that every time I boot up each of these machines, I have to enter the passphrase. And I'll have to do this every morning because I'll power each machine off each night for security reasons. Here's the problem: I don't have monitors or keyboards for these servers. It seems to me I have two options: Somehow enter the passphrase remotely Buy a KVM switch I doubt #1 is an option but I want to make sure it's not before I buy a KVM. Is it possible to enter the passphrase remotely? AND is it a good idea?

  Read the article

• How do I get around UAC in window 7 for a reboot with the option to abort

  - by Friendly Fire

  I've been using PSshutdown remotely on our Windows XP machines for our weekly reboots because of its ability to reboot with the ability to abort the operation. I use ShTasks to create the weekly task. The Problem is on Windows 7 the task is created but never executes because of UAC even when I run the batch using an administrator command line, or with the elevate privileges switch. I saw another user "Bob" created a program called idleshutdown.exe which does something similar. Not sure how his program gets around UAC.

  Read the article

• How can I turn off flash fill automatically in Excel 2013?

  - by user3480643

  Flash fill breaks a lot of things in older excel documents. It causes maddeningly slow transfers from cell to cell after updating. I am trying to find a way to turn off "flash fill" in Excel 2013 automatically before rolling the product out to the rest of the staff in my company. Is there (preferably) a registry key that I can apply or a switch that I can include during the install that will turn this option off? Here is an image of the setting that I am looking to turn off: I haven't been able to find any documentation online about turning this off, other than this one page from MS: http://office.microsoft.com/en-ie/excel-help/turn-flash-fill-on-HA104043292.aspx

  Read the article

• ALT+TAB doesn't work properly in Windows 8.1

  - by Marco1

  Holding ALT+TAB will activate the flip 2D to switch from a window to another. The problem is that this function remains active for a very short time and I'm not able to select the window I want in the foreground. I also noticed that when I put the cursor on an icon on the taskbar, the live preview thumbnail disappears quickly. With a safe mode restart the problem is no longer there, all is fine! With a clean install of Windows 8.1(no driver and applications installed) the problem is here again; obviously disappears with a safe mode restart also in this situation. What's the problem? A Windows process or service?

  Read the article

• Cisco 1760 T1 Setup

  - by Joseph

  My 1760 has a WIC1-T1 card in Slot 0 and the slot 0 "OK" light is lit. When the router boots it shows that it sees the T1 card. I would like to configure my T1. I received the following details from my ISP: * Removed IP's IP Version: IPv4 Router Interface: edge1.mia1 -- t1-2/1/0:2:13 -- Switch Port: Vlan: WAN Network: 4.59.?.?/30 Level3 Side: 4.59.?.? Customer Side: 4.59.?.? Cust. LAN IPs: 4.59.?.?/27 The problem is that it is not listed under interfaces. I am a noob with IOS, please let me know if you need more details. Thanks.

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >