Search Results

Search found 69987 results on 2800 pages for 'wcf data services'.

Page 1700/2800 | < Previous Page | 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707  | Next Page >

• running asp.net 3.5 and asp.net 2.0 in same site

  - by cori

  We're running ASP.Net 2.0 on our corporate web site, and I'd like to get it up to ASP.Net 3.5 as smoothly as possible. The project/solution architecture in VS 2005 is an ASP.Net 2.0 web project and an .Net 2.0 data access layer project which is used by the site code. Upon opening the projects in a new VS 2008 solution they seemed to be converted to .Net 3.5 with a minimum of fuss - they built correctly out of the box, deployed successfully, and seem to work just fine, which is exactly as I would expect given that .Net 2.0 and 3.5 share a common runtime. The major difference after the conversion is that the web.config file's referenced dlls are now the 3.5 versions. What I would like to do is to update the site piecemeal; as I make modifications to a given page send the 3.5 verson of that page over to our webserver and not update the whole site at once. In testing on our dev box this approach seems to be working fine - the site code is interacting with the .Net 3.5 data access layer without difficulty, a handful of pages are running 3.5 page-behind code (by this I mean that they're running assemblies built in VS 2008 - the site is using single-page assemblies for code behind), the 3.5 web.config is in place, and the bulk of the site is running code-behind assemblies built in VS2005. Everything looks great. Which makes me worried that I'm missing something. Is this architecture workable, or is there a problem lying is wait for m that I haven't considered?

  Read the article

• Incompatibility between x86 and x64 in Installation solution

  - by rodnower

  Hello, I have installation solution that have installer project (not web installer but simple installer) that installs NT services, web service and web sites with help of additional two projects of dlls with my own code that performs my installation step. In user actions of installer project I call installer function of one of those projects, and this project calls to installer of second project: installer - MiddleCaller - InstallationCore. All this developing on Windows 7 and work fine when I compile all in 32 bit. The project must run on Windows 2008. Because of some reasons all must be in x64 bit. For this purpose, in MiddleCaller and InstallationCore I click right button of mouse on project - build - targer x64. For to move installer project to 64 bit in properties of installer (when project is active) I check: Target platform: x64. When I run installation on x86 I get error: The installation package is not supported by this processor type" And this is good, because now I know that my installation compiled in 64 bit, but when I run this on windows 2008 I get: Error 1001. Exception occured while initializing the instance: System.BadImageFormatException: could not load file or Assembly 'MiddleCaller, v...' or one of its dependencies. An attempt was made to load a program with an incorrect format. Any one has some idea what I need to do for run fine the installation on x64? May be I still not moved the installer project to x64 bit, if yes, where I do this? Thank you for ahead.

  Read the article

• What components and IDE add-ins do you install with Delphi?

  - by Mick

  After a clean install of Delphi, what components and IDE add-ins do you make certain that you install? What's your Delphi "rig"? Here's what I install after a clean installation: Delphi 2007 JCL / JVCL - JEDI Code Library and JEDI Visual Code Library (600+ components) JWA / JWSCL - JEDI API Library & Security Code Library GExperts - GExperts is a free set of tools built to increase the productivity of Delphi and C++Builder programmers by adding several features to the IDE. TWM's experimental GExperts code formatter - adds code formatting capabilities to Delphi Virtual TreeView - Virtual Treeview is a treeview control built from ground up. More than 5 years of development made it one of the most flexible and advanced tree controls available today. MustangPeak Components (EasyList View, Virtual ShellTools, etc) - EasyListview is a control that has no dependance on the Microsoft Listview control but has all the features of the latest version from Microsoft. Also includes 'Explorer.exe' like shell components. Synapse lightweight networking components - contains simple low level non-visual objects for easy programming without problems. (no required multi-threaded synchronization, no need for windows message processing,…) Great for command line utilities, visual projects, NT services EurekaLog - EurekaLog is a complete bug resolution tool for Delphi and C++Builder developers that gives your application the power to catch every exception and memory leak, directly on the end user PC, generating a detailed log of the call stack (with file, class, method and line number), optionally sending you a copy of each log entry via email or to a web bug-tracker. DelphiSpeedUp - DelphiSpeedUp is an IDE plugin for Delphi and C++Builder. It improves the IDE’s startup speed and increases the general speed of the whole IDE. DDevExtensions - DDevExtensions extends the Delphi/C++Builder IDE by adding some new productivity features. IDE Fix Pack - The IDE Fix Pack installs is a DLL-Expert that fixes the following RAD Studio 2007 bugs at runtime. All changes are done in memory. No file on disk is modified. TPerlRegex - Regular Expression library for Delphi How about other Delphi developers?

  Read the article

• Dynamically created "CheckBoxList" in placeholder controls throwing null reference exception error d

  - by newName

  I have a web form that will dynamically create a number of checkboxlist filled with data based on the number of row in database. Then this is added to a placeholder to be displayed. theres a button when clicked, will add the selected check boxes value into database but right now when the button is clicked and after the postback, the page will show the error "System.NullReferenceException". the following code is written in Page_Load in (!Page.IsNotPostBack) and in a loop that will dynamically create a number of checkboxlist: CheckBoxLis chkContent = new CheckBoxList(); chkContent.ID = chkIDString; //chkIDString is an incremental int based on the row count chkContent.RepeatDirection = RepeatDirection.Horizontal; foreach (List<t> contentList in List<t>) //data retrieved as List<t> using LINQ { ListItem contents = new ListItem(); contents.Text = contentList.Title; contents.Value = contentList.contentID.ToString(); chkContent.Items.Add(contents); } plcSchool.Controls.Add(chkContent); //plcSchool is my placeholder plcSchool.Controls.Add(new LiteralControl("<br>")); protected void btnAdd_Click(object sender, EventArgs e) { CheckBoxList cbl = Page.FindControl("chkContent4") as CheckBoxList; Response.Write(cbl.SelectedValue.ToString()); // now im just testing to get the value from one of the checkboxlist } Anyone able to help, as it seems the controls are not recreated after the postback, therefore it can't find the control and throwing the null reference exception.

  Read the article

• Force float left with no line break no matter what

  - by Tesserex

  I'm guessing this isn't possible, but here goes. I have two tables, and I'm trying to get them to sit side-by-side so that they look like one table. The reason for this, instead of using one larger table, is that the data in the second table needs to be handled on a column basis, not row basis, for performance reasons like caching and AJAX-fetching data. So rather than have to reload the whole table for a single column, I decided to break the column out into a separate table, but have it visually seem like a single table. I can't find a way to forcibly put the second table next to the first. I can float them, but when the first table is too wide, the second one breaks to the next line. Here's the kicker: the width of the first table is dynamic. So I can't just set a huge width to their container. Well, I could set a huge width, like 1000%, but then I have a huge ugly horizontal scroll bar. So is there any way to tell the second table "Stay on that same line, no matter what! And line up right next to the previous element please!"

  Read the article

• Subsonic Access To App.Config Connection Strings From Referenced DLL in Powershell Script

  - by J Wynia

  I've got a DLL that contains Subsonic-generated and augmented code to access a data model. Actually, it is a merged DLL of that original assembly, Subsonic itself and a few other referenced DLL's into a single assembly, called "PowershellDataAccess.dll. However, it should be noted that I've also tried this referencing each assembly individually in the script as well and that doesn't work either. I am then attempting to use the objects and methods in that assembly. In this case, I'm accessing a class that uses Subsonic to load a bunch of records and creates a Lucene index from those records. The problem I'm running into is that the call into the Subsonic method to retrieve data from the database says it can't find the connection string. I'm pointing the AppDomain at the appropriate config file which does contain that connection string, by name. Here's the script. $ScriptDir = Get-Location [System.IO.Directory]::SetCurrentDirectory($ScriptDir) [Reflection.Assembly]::LoadFrom("PowershellDataAccess.dll") [System.AppDomain]::CurrentDomain.SetData("APP_CONFIG_FILE", "$ScriptDir\App.config") $indexer = New-Object LuceneIndexingEngine.LuceneIndexGenerator $indexer.GeneratePageTemplateIndex("PageTemplateIndex"); I went digging into Subsonic itself and the following line in Subsonic is what's looking for the connection string and throwing the exception: ConfigurationManager.ConnectionStrings[connectionStringName] So, out of curiosity, I created an assembly with a single class that has a single property that just runs that one line to retrieve the connection string name. I created a ps1 that called that assembly and hit that property. That prototype can find the connection string just fine. Anyone have any idea why Subsonic's portion can't seem to see the connection strings?

  Read the article

• Membership.GetUser() within TransactionScope throws TransactionPromotionException

  - by Bob Kaufman

  The following code throws a TransactionAbortedException with message "The transaction has aborted" and an inner TransactionPromotionException with message "Failure while attempting to promote transaction": using ( TransactionScope transactionScope = new TransactionScope() ) { try { using ( MyDataContext context = new MyDataContext() ) { Guid accountID = new Guid( Request.QueryString[ "aid" ] ); Account account = ( from a in context.Accounts where a.UniqueID.Equals( accountID ) select a ).SingleOrDefault(); IQueryable < My_Data_Access_Layer.Login > loginList = from l in context.Logins where l.AccountID == account.AccountID select l; foreach ( My_Data_Access_Layer.Login login in loginList ) { MembershipUser membershipUser = Membership.GetUser( login.UniqueID ); } [... lots of DeleteAllOnSubmit() calls] context.SubmitChanges(); transactionScope.Complete(); } } catch ( Exception E ) { [... reports the exception ...] } } The error occurs at the call to Membership.GetUser(). My Connection String is: <add name="MyConnectionString" connectionString="Data Source=localhost\SQLEXPRESS;Initial Catalog=MyDatabase;Integrated Security=True" providerName="System.Data.SqlClient" /> Everything I've read tells me that TransactionScope should just get magically applied to the Membership calls. The user exists (I'd expect a null return otherwise.)

  Read the article

• Hyphen vs Dash : Replace Dash with Hyphen

  - by soldieraman

  Alright so we had a problem recently In reporting services some of the String Columns were appearing as gibberish Chinese characters. On further investigation we found it is the hyphen. Well that's what we though first. On further investigation we found it a dash (or en dash) . Basically the reason this has happened is people copy pasting values into this column from word which converts hyphens into dashes automatically. But if you look at the database they both look the same. Though on the application side you can see the difference. How do I replace the dash with a normal hyphen. If you copy the value in put it in SQL server. A hyphen is gray while a dash is black but they both look exactly the same (i.e not bigger or smaller). Problem is I can't write a REPLACE script then (they are the freakin same) REPLACE ('-' with '-') is there a way special characters like the dash can be identified in SQL server? SQL Server v 2005

  Read the article

• WF 4.0 can't get to resume workflow on the staging/production environment

  - by Yasmine Atta Hajjaj

  I have developed various registeration workflows using WF4.0. Each work flow has various bookmarks. I am using the registeration wf for an asp.net application. I tested the asp.net application locally and it is working fine( Starting WF, Persisting to db and resuming bookmarks). When I try to test it on the staging server, everything goes messy. I can no longer resume wfs and I get an error message : System.Runtime.DurableInstancing.InstancePersistenceCommandException was unhandled by user code Message=The execution of the InstancePersistenceCommand named {urn:schemas-microsoft-com:System.Activities.Persistence/command}LoadWorkflow was interrupted by an error. Source=System.Runtime.DurableInstancing StackTrace: at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.Runtime.DurableInstancing.InstancePersistenceContext.OuterExecute(InstanceHandle initialInstanceHandle, InstancePersistenceCommand command, Transaction transaction, TimeSpan timeout) at System.Runtime.DurableInstancing.InstanceStore.Execute(InstanceHandle handle, InstancePersistenceCommand command, TimeSpan timeout) at System.Activities.WorkflowApplication.PersistenceManager.Load(TimeSpan timeout) at System.Activities.WorkflowApplication.LoadCore(TimeSpan timeout, Boolean loadAny) at System.Activities.WorkflowApplication.Load(Guid instanceId, TimeSpan timeout) at System.Activities.WorkflowApplication.Load(Guid instanceId) at CEO_StartUpCEORegisterationTest.LoadInstance(Guid wfInstanceId) in c:\Users\Kunoichi\Documents\Visual Studio 2010\Projects\CMERegistrationSystem\RegistrationPortal\CEO\StartUpCEORegisterationTest.aspx.cs:line 64 at CEO_StartUpCEORegisterationTest.Page_Load(Object sender, EventArgs e) in c:\Users\Kunoichi\Documents\Visual Studio 2010\Projects\CMERegistrationSystem\RegistrationPortal\CEO\StartUpCEORegisterationTest.aspx.cs:line 44 at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) InnerException: System.Data.SqlClient.SqlException Message=Index 'NCIX_KeysTable_SurrogateInstanceId' on table 'KeysTable' (specified in the FROM clause) does not exist. Source=.Net SqlClient Data Provider ErrorCode=-2146232060 Class=16 LineNumber=211 Number=308 Procedure=LoadInstance Server= State=1 StackTrace: at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.Activities.DurableInstancing.SqlWorkflowInstanceStoreAsyncResult.SqlCommandAsyncResultCallback(IAsyncResult result) I know that this is quite verbose. But I have been banging my head against the wall for more than a week. I did search and all I came to know was to work on ms dtc. I enabled it on the staging server , I installed application server on the staging server and I am still getting the same error. I would appreciate if anyone could help with the problem. Thanks in advance :)

  Read the article

• Fastest way to remove non-numeric characters from a VARCHAR in SQL Server

  - by Dan Herbert

  I'm writing an import utility that is using phone numbers as a unique key within the import. I need to check that the phone number does not already exist in my DB. The problem is that phone numbers in the DB could have things like dashes and parenthesis and possibly other things. I wrote a function to remove these things, the problem is that it is slow and with thousands of records in my DB and thousands of records to import at once, this process can be unacceptably slow. I've already made the phone number column an index. I tried using the script from this post: http://stackoverflow.com/questions/52315/t-sql-trim-nbsp-and-other-non-alphanumeric-characters But that didn't speed it up any. Is there a faster way to remove non-numeric characters? Something that can perform well when 10,000 to 100,000 records have to be compared. Whatever is done needs to perform fast. Update Given what people responded with, I think I'm going to have to clean the fields before I run the import utility. To answer the question of what I'm writing the import utility in, it is a C# app. I'm comparing BIGINT to BIGINT now, with no need to alter DB data and I'm still taking a performance hit with a very small set of data (about 2000 records). Could comparing BIGINT to BIGINT be slowing things down? I've optimized the code side of my app as much as I can (removed regexes, removed unneccessary DB calls). Although I can't isolate SQL as the source of the problem anymore, I still feel like it is.

  Read the article

• Implementing a 2 Legged OAuth Provider

  - by Rob Wilkerson

  I'm trying to find my way around the OAuth spec, its requirements and any implementations I can find and, so far, it really seems like more trouble than its worth because I'm having trouble finding a single resource that pulls it all together. Or maybe it's just that I'm looking for something more specialized than most tutorials. I have a set of existing APIs--some in Java, some in PHP--that I now need to secure and, for a number of reasons, OAuth seems like the right way to go. Unfortunately, my inability to track down the right resources to help me get a provider up and running is challenging that theory. Since most of this will be system-to-system API usage, I'll need to implement a 2-legged provider. With that in mind... Does anyone know of any good tutorials for implementing a 2-legged OAuth provider with PHP? Given that I have securable APIs in 2 languages, do I need to implement a provider in both or is there a way to create the provider as a "front controller" that I can funnel all requests through? When securing PHP services, for example, do I have to secure each API individually by including the requisite provider resources on each? Thanks for your help.

  Read the article

• Uploadify not working with ASP.NET WebForms

  - by João Guilherme

  Hi ! I'm trying to use Uploadify in a ASP.NET webforms project. The problem is that my script is not calling the generic handler. Here is the script. <input id="fileInput" name="fileInput" type="file" /> <script type="text/javascript"> $(document).ready(function() { $('#fileInput').uploadify({ 'uploader': '/Ferramenta/Comum/Uploadify/uploadify.swf', 'script': 'UploadTest.ashx', 'cancelImg': '/Ferramenta/Comum/Uploadify/cancel.png', 'folder': "/Ferramenta/Geral/", 'auto': true, 'onError': function(event, queueID, fileObj, errorObj) { alert('error'); }, 'onComplete': function(event, queueID, fileObj, response, data) { alert('complete'); }, 'buttonText' : 'Buscar Arquivos' }); }); </script> This is the code of the generic handler (just to test) using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Services; using System.IO; namespace Tree.Ferramenta.Geral { public class UploadTest : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.Write("1"); } public bool IsReusable { get { return false; } } } } Any ideas ? Thanks !

  Read the article

• Silverlight 4, combobox databinding problem

  - by synergetic

  In my Silverlight 4 app, CustomerView (UserControl) shows Customer object as it's DataContext. Customer object has IndustryCode string property. I created combobox called cboIndustryCode and bind it to the IndustryCode property the following way: <ComboBox x:Name="cboIndustryCode" SelectedValue="{Binding IndustryCode, Mode=TwoWay}" ... /> In code-behind I populate cboIndustryCode with List of Industry object, which has Code and Name properties: cboIndustryCode.ItemsSource = industries; //which is of List<Industry> type Now, to show everything properly, in XAML I added the following: <ComboBox x:Name="cboIndustryCode" SelectedValue="{Binding IndustryCode, Mode=TwoWay}" DisplayMemberPath="Name" SelectedValuePath="Code" ... /> So, when I get a customer class from my data layer and set the DataContext to this customer instance, the cboIndustryCode properly displays industry name. But, then I edit customer (not necessarily IndustryCode) and save the object (which resets DataContext = new Customer()) and retrieve the customer again from database, and I see that cboIndustryCode no longer working. It just displays nothing, and if I select new value from the list, it does not update underlying customer object's IndustryCode property. The problem goes away, if I put the following code in the place where I set DataContext to a instance of customer, retrieved from database: Binding binding = new Binding("IndustryCode"); binding.Mode = BindingMode.TwoWay; cboIndustryCode.SetBinding(ComboBox.SelectedValueProperty, binding); So, in short, combobox's binding is reset somehow every time I save my data. Can someone tell me the reason?

  Read the article

• Database with "Open Schema" - Good or Bad Idea?

  - by Claudiu

  The co-founder of Reddit gave a presentation on issues they had while scaling to millions of users. A summary is available here. What surprised me is point 3: Instead, they keep a Thing Table and a Data Table. Everything in Reddit is a Thing: users, links, comments, subreddits, awards, etc. Things keep common attribute like up/down votes, a type, and creation date. The Data table has three columns: thing id, key, value. There’s a row for every attribute. There’s a row for title, url, author, spam votes, etc. When they add new features they didn’t have to worry about the database anymore. They didn’t have to add new tables for new things or worry about upgrades. This seems like a terrible idea to me, but it seems to have worked out for Reddit. Is it a good idea in general, though? Or is it a peculiarity of Reddit that happened to work out for them?

  Read the article

• MonoTouch: using embedded resx files on iPhone build

  - by bright

  I'm able to load and access resx files in Simulator builds of my iPhone app built using MonoTouch. The resx file entry in the csproj file looks like: <ItemGroup> <EmbeddedResource Include="MapMenu\Resources\MapMenu.resx"> <Generator>ResXFileCodeGenerator</Generator> <LastGenOutput>MapMenu.Designer.cs</LastGenOutput> </EmbeddedResource> </ItemGroup> The .resx file itself has an entry like this: <data name="Main_Menu" type="System.Resources.ResXFileRef, System.Windows.Forms"> <value>Main Menu.mm;System.String, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089;Windows-1252</value> </data> and the generated MapMenu.Designer.cs file has this: internal static string Main_Menu { get { return ResourceManager.GetString("Main_Menu", resourceCulture); } } As mentioned above, calling the Main_Menu accessor works fine on the simulator. On the device, however, it produces: <Notice>: Unhandled Exception: System.MissingMethodException: No constructor found for System.Resources.RuntimeResourceSet::.ctor(System.IO.UnmanagedMemoryStream) <Notice>: at System.Activator.CreateInstance (System.Type type, BindingFlags bindingAttr, System.Reflection.Binder binder, System.Object[] args, System.Globalization.CultureInfo culture, System.Object[] activationAttributes) [0x00000] in <filename unknown>:0 <Notice>: at System.Activator.CreateInstance (System.Type type, System.Object[] args, System.Object[] activationAttributes) [0x00000] in <filename unknown>:0 <Notice>: at System.Activator.CreateInstance (System.Type type, System.Object[] args) [0x00000] in <filename unknown>:0 <Notice>: at System.Resources.ResourceManager.InternalGetResourceSet (System.Globalization.CultureInfo culture, Boolean createIfNotExists, Boolean tryParents) [0x00000] in <filename unknown>:0 <Notice>: at System.Resources.ResourceManager.GetString (System.String name, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 <Notice>: at MapMenu.Resources.MapMenu.get_Main_Menu () [0x00000] in <filename unknown>:0 Did a few sanity checks, and am wondering at this point if this really is missing functionality in Monotouch. Thanks,

  Read the article

• How do I store more information in a marker?

  - by Sebastian

  Hello, I'm using Google Maps v3 and I build in the server side a json collection of location data. So when I receive that, I iterate through that collection and create a marker object for each and every one of them. For each of these markers, I bind them with the click event, so when the user clicks on a marker in the map, it displays an infoWindow with data related to the associated location. I have an array to store all the location got from the server that holds the retrieved json objects and their corresponding marker. The problem is that, even when I have an array that I can reference or iterate through, I need to not only get the marker object when the user clicks on them, but also the location object, that stores more information. I tried to mantain this array of objects and reference it from the calling object without success, because the function is called by the marker and not the location object. So I thought if it's possible to store more information in the google maps marker object like using a general purpose field. Please let me know if more information is needed. Thanks!

  Read the article

• How do i modify the XSL to change the xml format.

  - by user323719

  In the below XSL. <xsl:param name="insert-file" as="document-node()" /> <xsl:template match="*"> <xsl:variable name="input">My text</xsl:variable> <xsl:variable name="Myxml" as="element()*"> <xsl:call-template name="populateTag"> <xsl:with-param name="nodeValue" select="$input"/> </xsl:call-template> </xsl:variable> <xsl:copy-of select="$Myxml"></xsl:copy-of> </xsl:template> <xsl:template name="populateTag"> <xsl:param name="nodeValue"/> <xsl:for-each select="$insert-file/insert-data/data"> <xsl:choose> <xsl:when test="@index = 1"> <a><xsl:value-of select="$nodeValue"></xsl:value-of></a> </xsl:when> </xsl:choose> </xsl:for-each> </xsl:template> I am getting the output as: <?xml version="1.0" encoding="UTF-8"? <aMy text</a <aMy text</a <aMy text</a <aMy text</a I want template "populateTag" to retun me the xml in the below format. How do i modify the template "populateTag" to achive the same. Expected output from template "populateTag": <?xml version="1.0" encoding="UTF-8"? <a<a<a<aMy text</a</a</a</a Please give your ideas.

  Read the article

• How to parse SOAP response from ruby client?

  - by Richard O'Neil

  Hi I am learning Ruby and I have written the following code to find out how to consume SOAP services: require 'soap/wsdlDriver' wsdl="http://www.abundanttech.com/webservices/deadoralive/deadoralive.wsdl" service=SOAP::WSDLDriverFactory.new(wsdl).create_rpc_driver weather=service.getTodaysBirthdays('1/26/2010') The response that I get back is: #<SOAP::Mapping::Object:0x80ac3714 {http://www.abundanttech.com/webservices/deadoralive} getTodaysBirthdaysResult=#<SOAP::Mapping::Object:0x80ac34a8 {http://www.w3.org/2001/XMLSchema}schema=#<SOAP::Mapping::Object:0x80ac3214 {http://www.w3.org/2001/XMLSchema}element=#<SOAP::Mapping::Object:0x80ac2f6c {http://www.w3.org/2001/XMLSchema}complexType=#<SOAP::Mapping::Object:0x80ac2cc4 {http://www.w3.org/2001/XMLSchema}choice=#<SOAP::Mapping::Object:0x80ac2a1c {http://www.w3.org/2001/XMLSchema}element=#<SOAP::Mapping::Object:0x80ac2774 {http://www.w3.org/2001/XMLSchema}complexType=#<SOAP::Mapping::Object:0x80ac24cc {http://www.w3.org/2001/XMLSchema}sequence=#<SOAP::Mapping::Object:0x80ac2224 {http://www.w3.org/2001/XMLSchema}element=[#<SOAP::Mapping::Object:0x80ac1f7c>, #<SOAP::Mapping::Object:0x80ac13ec>, #<SOAP::Mapping::Object:0x80ac0a28>, #<SOAP::Mapping::Object:0x80ac0078>, #<SOAP::Mapping::Object:0x80abf6c8>, #<SOAP::Mapping::Object:0x80abed18>] >>>>>>> {urn:schemas-microsoft-com:xml-diffgram-v1}diffgram=#<SOAP::Mapping::Object:0x80abe6c4 {}NewDataSet=#<SOAP::Mapping::Object:0x80ac1220 {}Table=[#<SOAP::Mapping::Object:0x80ac75e4 {}FullName="Cully, Zara" {}BirthDate="01/26/1892" {}DeathDate="02/28/1979" {}Age="(87)" {}KnownFor="The Jeffersons" {}DeadOrAlive="Dead">, #<SOAP::Mapping::Object:0x80b778f4 {}FullName="Feiffer, Jules" {}BirthDate="01/26/1929" {}DeathDate=#<SOAP::Mapping::Object:0x80c7eaf4> {}Age="81" {}KnownFor="Cartoonists" {}DeadOrAlive="Alive">]>>>> I am having a great deal of difficulty figuring out how to parse and show the returned information in a nice table, or even just how to loop through the records and have access to each element (ie. FullName,Age,etc). I went through the whole "getTodaysBirthdaysResult.methods - Object.new.methods" and kept working down to try and work out how to access the elements, but then I get to the array and I got lost. Any help that can be offered would be appreciated.

  Read the article

• The Date type and the Android database

  - by cdonner

  I understand that SQLite stores dates as long integers. When I read rows into a cursor using the standard method (i.e. using the query() method that reads data into a cursor), the result is a date string that includes the time. If I want a different format, I have to parse the string back into a date - possible, but a bit backwards. By using a ViewBinder (as suggested in this question), I can pretty much do anything I want, but the date is already a string at the time the method executes. The accepted answer to the above question also suggests that storing dates as longs would help avoid this problem. I don't want to do that, just in case I want to interpret my data with something else than this application. Maybe I want to expose it via a provider. Is there a way to handle this in the database adapter instead, i.e. controlling the date format that the cursor contains, so that I don't have to change the schema, and don't have to parse the default output back into a Date type?

  Read the article

• WPF Toolkit Charting and IndependentValueBinding, IndependentValuePath

  - by Joel Barsotti

  So I'm having a problem with the charting engine from the WPF toolkit. We haven't moved our data to a proper object model, so the ItemSource is backed with a DataView. First attempt <chartingToolkit:ScatterSeries x:Name="TargetSeries" DataPointStyle="{StaticResource TargetStyle}" ItemsSource="{Binding Path=TargetSeriesData}" IndependentValueBinding="{Binding Path=TargetSeries_X}" DependentValueBinding="{Binding Path=TargetSeries_X}" /> This crashes because, I believe, it thinks the bindings are the values to plot or some sort of mismatch. Second attempt <chartingToolkit:ScatterSeries x:Name="TargetSeries" DataPointStyle="{StaticResource TargetStyle}" ItemsSource="{Binding Path=TargetSeriesData}" IndependentValuePath="{Binding Path=TargetSeries_X}" DependentValuePath="{Binding Path=TargetSeries_X}" /> This crashes during the init step becaue the Path properties aren't backed with dependency properties and therefore cannot be bound. Third attempt <chartingToolkit:ScatterSeries x:Name="TargetSeries" DataPointStyle="{StaticResource TargetStyle}" ItemsSource="{Binding Path=TargetSeriesData}" IndependentValuePath="targetFooXColumnName" DependentValuePath="targetFooYColumnName" /> Now this works! But I wanted to use the binding so I can switch from using the targetFooXColumnName to the targetFooBarXColumnName. So this solution will cause a whole lot of hacky looking code to switch the Path's manually. Anyway to fix this? Can I use some sort of convertor to get the Binding properties to correctly pull the data from the columns in the DataView? Thanks, Joel

  Read the article

• open flash chart rails x-axis issue

  - by Jimmy

  Hey guys, I am using open flash chart 2 in my rails application. Everything is looking smooth except for the range on my x axis. I am creating a line to represent cell phone plan cost over a specific amount of usage and I'm generate 8 values, 1-5 are below the allowed usage while 6-8 are demonstrations of the cost for usage over the limit. The problem I'm encountering is how to set the range of the X axis in ruby on rails to something specific to the data. Right now the values being displayed are the indexes of the array that I'm giving. When I try to hand a hash to the values the chart doesn't even load at all. So basically I need help getting a way to set the data for my line properly so that it displays correctly, right now it is treating every value as if it represents the x value of the index of the array. Here is a screen shot which may be a better description than what I am saying: http://i163.photobucket.com/albums/t286/Xeno56/Screenshot.png Note that those values are correct just the range on the x-axis is incorrect, it should be something like 100, 200, 300, 400, 500, 600, 700 Code: y = YAxis.new y.set_range(0,100, 20) x_legend = XLegend.new("Usage") x_legend.set_style('{font-size: 20px; color: #778877}') y_legend = YLegend.new("Cost") y_legend.set_style('{font-size: 20px; color: #770077}') chart =OpenFlashChart.new chart.set_x_legend(x_legend) chart.set_y_legend(y_legend) chart.y_axis = y line = Line.new line.text = plan.name line.width = 2 line.color = '#006633' line.dot_size = 2 line.values = generate_data(plan) chart.add_element(line) def generate_data(plan) values = [] #generate below threshold numbers 5.times do |x| usage = plan.usage / 5 * x cost = plan.cost * 10 values << cost end #generate above threshold numbers 3.times do |x| usage = plan.usage + ((plan.usage / 5) * x) cost = plan.cost + (usage * plan.overage) values << cost end return values end

  Read the article

• Using section header in Sendgrid

  - by Zefiryn

  I am trying to send emails through sendgrid in Zend application. I copy the php code from the sendgrid documentation (smtapi class and swift). I create a template with places that should be substituted with %variable%. Now I create headers for sendgrid as defined here: http://docs.sendgrid.com/documentation/api/smtp-api/developers-guide/ In result I get something looking like this: { "to": ["[email protected]", "[email protected]", "[email protected]", "[email protected]", "[email protected]"], "sub": {"%firstname%": ["Benny", "Chaim", "Ephraim", "Yehuda", "will"]}, "section": {"%postername%": "Rabbi Yitzchak Lieblich", "%postermail%": "[email protected]", "%categoryname%": "General", "%threadname%": "Completely new thread", "%post%": "This thread is to inform you about something very important", "%threadurl%": "http:\/\/hb.local\/forums\/general\/thread\/143", "%replyto%": "http:\/\/hb.local\/forums\/general\/thread\/143", "%unsubscribeurl%": "http:\/\/hb.local\/forums\/settings\/", "%subscribeurl%": "http:\/\/hb.local\/forums\/subscribe-thread\/id\/143\/token\/1b20eb7799829e22ba2d48ca0867d3ce"} } Now while all data defined in "sub" changes I cannot make section work. In the final email I still got %postername%. When I move this data to sub and repeat them for each email everything is working fine. Has anyone a clue what I am doing wrong? Docs for section are here: http://docs.sendgrid.com/documentation/api/smtp-api/developers-guide/section-tags/

  Read the article

• Custom HTTPHandler causing caching or session issues?

  - by Jan de Jager

  So i have a custom CMS running under .Net 3.5 written entirely in c#. The engine is optimized to render for mobile devices, but also server to normal web browsers. It also supports cookieless sessions. Great... I've chosen not to cache anything (including browser data) in order to control the rendering completely from data. This has been all good until lately. The engine implements a basic login function that simply logs the user state within a session object. The behavior is rather strange. User will click through the site no problem. Then login. The login will either go through successfully or just redisplay the login screen, suggesting a cached page being returned or redisplayed... If the login is successful the concurrent page hits will switch arbitrarily between logged in and logged out state... Also suggesting either the session state is not accessible or a cached page being returned. I have debugged the hell out of the thing.... including using fiddler and the like. When debugging the behavior disappears. Huh? One of the sites running on the engine is http://www.wiseguy.mobi (sorry customized for South Africa, so you'll probably not be able to get the password Text Message)!

  Read the article

• Extra white space, on HTML output, on PHP MVC

  - by user316841

  Hi, I'm getting extra white space, that is not CSS, or nothing like it on the view output: The HTML. I've checked for ? (removed, where I could), saved UTF8 without BOM. Checked for existent white space in the beginning of each file, even at end. This is the structure: index.php - this is the entry point; MODEL/ CONTROLLER/ VIEW/ Let's say, that trough method GET, its sent the var TPL with some value. Let's call it LIST, so it pulls the LIST model, with all data and then show the right template to the user, with the right data. I used and tested, with require_once, include_once, include, even tested with readfile (just to test). The LIST Template opens the header.tpl and footer.tpl; I also tryed to remove this both includes from LIST template, but still, the extra white space continued. This is where the extra white space is coming from. This controller is placed between controller activity runs here , this is where the extra white space is coming from: $model_works-getRows(); $rows = $model_works-rows; if ( !require_once('views/list_works.tpl.php') ) { echo "Error."; } // end if clause The list_works.tpl.php, is basicly HTML with tags; I've t tested by changing the extension to something else, like html. Also, just to remember that at top of this file, we are using require_once to open the header.tpl and at bottom the footer.tpl. I've tested by removing both and the extra white space was still generated. The extra white space is being generated here: EXTRA WHITE SPACE HERE Thanks a lot for looking, ;D

  Read the article

• Regex query: how can I search PDFs for a phrase where words in that phrase appear on more than one l

  - by Alison

  I am trying to set up an index page for the weekly magazine I work on. It is to show readers the names of companies mentioned in that weeks' issue, plus the page numbers they are appear on. I want to search all the PDF files for the week, where one PDF = one magazine page (originally made in Adobe InDesign CS3 and Adobe InCopy CS3). I have set up a list of companies I want to search for and, using PowerGREP and using delimited regular expressions, I am able to find most page numbers where a company is mentioned. However, where a company name contains two or more words, the search I am running will not pick up instances where the name appears over more than one line. For example, when looking for "CB Richard Ellis" and "Cushman & Wakefield", I got no result when the text appeared like this: DTZ beat BNP PRE, CB [line break here] Richard Ellis and Cushman & [line break here] Wakefield to secure the contract. [line end here] Could someone advise me on how to write a regular expression that will ignore white space between words and ignore line endings OR one that will look for the words including all types of white space (ie uneven spaces between words; spaces at the end of lines or line endings; and tabs (I am guessing that this info is imbedded somehow in PDF files). Here is a sample of the set of terms I have asked PowerGREP to search for: \bCB Richard Ellis\b \bCB Richard Ellis Hotels\b \bCentaur Services\b \bChapman Herbert\b \bCharities Property Fund\b \bChetwoods Architects\b \bChurch Commissioners\b \bClive Emson\b \bClothworkers’ Company\b \bColliers CRE\b \bCombined English Stores Group\b \bCommercial Estates Group\b \bConnells\b \bCooke & Powell\b \bCordea Savills\b \bCrown Estate\b \bCushman & Wakefield\b \bCWM Retail Property Advisors\b [Note that there is a delimited hard return between each \b at the end of each phrase and beginnong of the next phrase.] By the way, I am a production journalist and not usually involved in finding IT-type solutions and am finding it difficult to get to grips with the technical language on the PowerGREP site. Thanks for assistance Alison

  Read the article

< Previous Page | 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707  | Next Page >