Search Results

Search found 4903 results on 197 pages for 'mq series'.

Page 172/197 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Will TFS 2010 support non-contiguous merging?

  - by steve_d

  I know that merging non-contiguous changesets at once may not be a good idea. However there is at least one situation in which merging non-contiguous changesets is (probably) not going to break anything: when there are no intervening changes on the affected individual files. (At least, it wouldn't break any worse than would a series of cherry-picked merges, checked in each time; and at least this way you would discover breakage before checking in). For instance, let's say you have a Main and a Development branch. They start out identical (e.g. after a release). They have two files, foo.cs and bar.cs. Alice makes a change in Development\foo.cs and checks it in as changeset #1001. Bob makes a change in Development\bar.cs and checks it in as #1002. Alice makes another change to Development\foo.cs and checks it in as #1003. Now we could in theory merge both changes #1001 and #1003 from dev-to main in a single operation. If we try to merge at the branch level, dev-to-main, we will have to do it as two operations. In this simple, contrived example it's simple enough to merge the one file - but in the real world where there would be many files involved, it's not so simple. Non-contiguous merging is one of the reasons given for why "merge by workitem" is not implemented in TFS.

  Read the article

• Complicated .NET factory design

  - by Tom W

  Hello SO; I'm planning to ask a fairly elaborate question that is also something of a musing here, so bear with me... I'm trying to design a factory implementation for a simulation application. The simulation will consist of different sorts of entities i.e. it is not a homogenous simulation in any respect. As a result, there will be numerous very different concrete implementations and only the very general properties will be abstracted at the top level. What I'd like to be able to do is create new simulation entities by calling a method on the model with a series of named arguments representing the parameters of the entity, and have the model infer what type of object is being described by the inbound parameters (from the names of the parameters and potentially the sequence they occur in) and call a factory method on the appropriate derived class. For example, if I pass the model a pair of parameters (Param1=5000, Param2="Bacon") I would like it to infer that the names Param1 and Param2 'belong' to the class "Blob1" and call a shared function "getBlob1" with named parameters Param1:=5000, Param2:="Bacon" whereas if I pass the model (Param1=5000, Param3=50) it would call a similar factory method for Blob2; because Param1 and Param3 in that order 'belong' to Blob2. I foresee several issues to resolve: Whether or not I can reflect on the available types with string parameter names and how to do this if it's possible Whether or not there's a neat way of doing the appropriate constructor inference from the combinatoric properties of the argument list or whether I'm going to have to bodge something to do it 'by hand'. If possible I'd like the model class to be able to accept parameters as parameters rather than as some collection of keys and values, which would require the model to expose a large number of parametrised methods at runtime without me having to code them explicitly - presumably one for every factory method available in the relevant namespace. What I'm really asking is how you'd go about implementing such a system, rather than whether or not it's fundamentally possible. I don't have the foresight or experience with .NET reflection to be able to figure out a way by myself. Hopefully this will prove an informative discussion.

  Read the article

• Jquery passing an HTML element into a function

  - by christian

  I have an HTML form where I am going to copy values from a series of input fields to some spans/headings as the user populates the input fields. I am able to get this working using the following code: $('#source').keyup(function(){ if($("#source").val().length == 0){ $("#destinationTitle").text('Sample Title'); }else{ $("#destinationTitle").text($("#source").val()); } }); In the above scenario the html is something like: Sample Title Basically, as the users fills out the source box, the text of the is changed to the value of the source input. If nothing is input in, or the user deletes the values typed into the box some default text is placed in the instead. Pretty straightforward. However, since I need to make this work for many different fields, it makes sense to turn this into a generic function and then bind that function to each 's onkeyup() event. But I am having some trouble with this. My implementation: function doStuff(source,target,defaultValue) { if($(source).val().length == 0){ $(target).text(defaultValue); }else{ $(target).text($(source).val()); } } which is called as follows: $('#source').keyup(function() { doStuff(this, '"#destinationTitle"', 'SampleTitle'); }); What I can't figure out is how to pass the second parameter, the name of the destination html element into the function. I have no problem passing in the element I'm binding to via "this", but can't figure out the destination element syntax. Any help would be appreciated - many thanks!

  Read the article

• Does the Eclipse editor have an equivalent of emacs's "align-regex"?

  - by rjray

  I've been using Eclipse pretty regularly for several years now, but I admit to not having explored all the esoterica it has to offer, particularly in the areas of what formatting features the editors offer. The main thing I miss from (X)emacs is the "align-regex" command, which let me take several lines into a region and then format them so that some common pattern in all lines was aligned. The simplest example of this is a series of variable assignments: var str = new String('aString'); var index = 0; var longCamelCaseObjectName = new LongNameObject(); After doing align-regex on "=", that would become: var str = new String('aString'); var index = 0; var longCamelCaseObjectName = new LongNameObject(); Now, you may have your own thoughts on stylistic (ab)use of white space and alignment, etc., but that's just an example (I'm actually trying to align a different kind of mess entirely). Can anyone tell me off-hand if there's an easy key-combo-shortcut for this in Eclipse? Or even a moderately-tricky one?

  Read the article

• find on page neighbouring siblings jquery?

  - by Stefan

  ok i've been searching for an answer to this (if there even is one) with no luck i have a succession of div elements as shown in the pic bellow: http://i61.photobucket.com/albums/h46/DrAcOliCh_2006/untitled-1.jpg?t=1300520458 the blue background is the absolute parent of the orange divs which are also siblings the DOM is not quite organized according to how the orange elements appear on the page because they are all draggable (i used jquery UI) and i moved them around inside the parent, yet, as some know, the DOM doesn't get reorganized when i move draggable elements around, so basically the siblings structure remains the same inside the DOM what i kinda need (again if that is even possible) is to determine the immediate on page neighbouring siblings of eachother; in other words, say we take that "FlashBanner" element which, on page, has the "Logo", the "Search" and the "ShoppingBasket" elements as immediate top siblings and the "Categories" and "Content" elements as immediate bottom siblings (and no left or right siblings) i have a manual solution to this, that is to pre-specify the on page neighbouring siblings for each element through a series of form fields and stuff (another story and another wall of text to explain), but that is not important atm as i want to know if it can be done automatically (i.e tell jquery to find them for me) appreciate any help, even an "it can't be done automatically", and thank you for your time hope this doesn't sound to ambiguous (or silly for that matter) and why i need to do that don't ask :P wall of text to explain cheers :)

  Read the article

• CMD For Loop does not hold set /a value

  - by Bob Hope

  Didn't know how to explain this well, so here is the code @echo off set test=0 for /f %%a in (textfile.txt) do ( rem loops five times(5 lines in textfile.txt) set /a test=test+1 rem Adds 1 to Test echo %%a rem Echo's correct line in file echo %test% rem Echo's whatever X was before the loop ) echo %test% rem Displays the correct value of X pause this is just an example of where I am finding the problem, txtfile.txt has 5 lines, so the for loop goes 5 times, each time, test gets +1 to it, and the /a displays the correct value of X, but the last echo on the for loop displays 0, which is what test is set to before the loop. The value of test is not changing until the loop is finished... is there any way to fix this? Here is what I want to accomplish, as there may be an easier way: I want to run a for loop that findstr's all rtf's in a series of sub folders, and copies them all to a all directory with a new name, 1.rtf,2.rtf,3.rtf, etc. The reason I need to rename them on the transfer is they all have the same name.

  Read the article

• In SVG is there a way to grab a shape anywhere when it has fill = "none"

  - by Shaunwithanau

  I have a series of shapes that I want the user to be able click anywhere on the shape to pick up as part of a drag and drop feature. All of these shapes are bounded by a rectangle. For example: <g id="shape1" fill="none" stroke="black"> <rect x="0" y="0" width="100" height="100"/> <circle cx="50" cy="50" r="50"/> </g> <g id="shape2" fill="none" stroke="black"> <rect x="0" y="0" width="100" height="100"/> <line x1="0" y1="0" x2="50" y2="100"/> <line x1="100" y1="0" x2="50" y2="100"/> </g> I already have all of the drag and drop parts working, the problem is all of these shapes have to have fill="none" so you can see anything that may be underneath of them. This means that even though they are bounded by the rectangle, at the moment users have to physically click on one of the lines in order to pick it up instead of being able to click anywhere on the shape like I want. My original idea was to use fill="white" and then set opacity="0" or some really low value but this applies to the stroke as well so this didn't work out. Any ideas on how I can get this working?

  Read the article

• "for" loop from program 7.6 from Kochan's "Programming in Objective-C"

  - by Mr_Vlasov

  "The sigma notation is shorthand for a summation. Its use here means to add the values of 1/2^i, where i varies from 1 to n. That is, add 1/2 + 1/4 + 1/8 .... If you make the value of n large enough, the sum of this series should approach 1. Let’s experiment with different values for n to see how close we get." #import "Fraction.h" int main (int argc, char *argv[]) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; Fraction *aFraction = [[Fraction alloc] init]; Fraction *sum = [[Fraction alloc] init], *sum2; int i, n, pow2; [sum setTo: 0 over: 1]; // set 1st fraction to 0 NSLog (@"Enter your value for n:"); scanf ("%i", &n); pow2 = 2; for (i = 1; i <= n; ++i) { [aFraction setTo: 1 over: pow2]; sum2 = [sum add: aFraction]; [sum release]; // release previous sum sum = sum2; pow2 *= 2; } NSLog (@"After %i iterations, the sum is %g", n, [sum convertToNum]); [aFraction release]; [sum release]; [pool drain]; return 0; } Question: Why do we have to create additional variable sum2 that we are using in the "for" loop? Why do we need "release previous sum" here and then again give it a value that we just released? : sum2 = [sum add: aFraction]; [sum release]; // release previous sum sum = sum2; Is it just for the sake of avoiding memory leakage? (method "add" initializes a variable that is stored in sum2)

  Read the article

• trouble with custom 'Text Bubble' component (examples included)

  - by gmoniey

  I'm trying to use a custom Text component to show a series of comments. I got the original idea from: http://www.eonflex.com/?p=40 I've got the base case working but I am stuck with 2 problems I cant seem to figure out: Since I am drawing around the text, the actual height of each bubble is greater than that of the Text field, as a result, the last bubble is always chopped off. I have tried explicitly overriding the height getter, and adding some padding, but I cant seem to get it right. You can see an example here: http://test.lambandtunafish.com/bubbles/CommentTest.swf In my layout, I have 2 VBoxes (one nested inside the other). The first vbox shows a form where the user can enter a comment, and the second box has all the comments. In order to ensure that the scrollbars only show up on the second box, I set minHeight="0" on the nested VBox, but then for some reason, some comments' text is shifted to the right. You can see an example here (look at the first comment): http://test.lambandtunafish.com/bubbles/CommentTest-minHeight.swf Rather than posting the code here, I've provided some links: Container: http://test.lambandtunafish.com/bubbles/CommentTest.mxml Bubble: http://test.lambandtunafish.com/bubbles/CommentBubble.as If anyone has any ideas, I would appreciate it. Thanks!

  Read the article

• Panel in Windows Forms Application not clearing

  - by SwiftStriker00

  I'm working on my project: [Beer Pong Management System][1], a Windows Forms application. I am currently trying to add a whole tournament mode to it. In a nutshell, I've created a TabControl, with the first tab page with the settings and setup and the second page the brackets. There is a feature for each of the match-ups, that once there is a winner is decided, a yellow cancel button will appear in order to revert the tournament. However my issue is when i click the button the next match-up does not get removed in the series is going. See below: Image Here(not high enough rep to insert image) I have tried to set the MatchUp to null, I've tried dispose(), close(). even Parent.Controls.Remove(). Even after I switch tabs which is supposed to clear all, they still sit there when i come back. I have a feeling I might be loosing a reference or something because I can't even push new teams into them, they just sit there with their buttons. Does anyone have any tips or know of any known issues that might be causing this? Thanks. [1] _http://www.cs.rit.edu/~rmb1201/pages/code.shtml

  Read the article

• How can one make a 'passthru' function in C++ using macros or metaprogramming?

  - by Ryan

  So I have a series of global functions, say: foo_f1(int a, int b, char *c); foo_f2(int a); foo_f3(char *a); I want to make a C++ wrapper around these, something like: MyFoo::f1(int a, int b, char* c); MyFoo::f2(int a); MyFoo::f3(char* a); There's about 40 functions like this, 35 of them I just want to pass through to the global function, the other 5 I want to do something different with. Ideally the implementation of MyFoo.cpp would be something like: PASSTHRU( f1, (int a, int b, char *c) ); PASSTHRU( f2, (int a) ); MyFoo::f3(char *a) { //do my own thing here } But I'm having trouble figuring out an elegant way to make the above PASSTHRU macro. What I really need is something like the mythical X getArgs() below: MyFoo::f1(int a, int b, char *c) { X args = getArgs(); args++; //skip past implicit this.. ::f1(args); //pass args to global function } But short of dropping into assembly I can't find a good implementation of getArgs().

  Read the article

• Performance when querying a View

  - by Nate Bross

  I'm wondering if this is a bad practice or if in general this is the correct approach. Lets say that I've created a view that combines a few attributes from a few tables. My question, what do I need to do so I can query against this view as if it were a table without worrying about performance? All attributes in the original tables are indexed, my concern is that the result view will have hundreds of thousands of records, which I will want to narrow down quite a bit based on user input. What I'd like to avoid, is having multiple versions of the code that generates this view floating around with a few extra "where" conditions to facilitate the user input filtering. For example, assume my view has this header VIEW(Name, Type, DateEntered) this may have 100,000+ rows (possibly millions). I'd like to be able to make this view in SQL Server, and then in my application write querlies like this: SELECT Name, Type, DateEntered FROM MyView WHERE DateEntered BETWEEN @date1 and @date2; Basically, I am denormalizing my data for a series of reports that need to be run, and I'd like to centralize where I pull the data from, maybe I'm not looking at this problem from the right angle though, so I'm open to alternative ways to attack this.

  Read the article

• Quickest way to compare a buch of array or list of values.

  - by zapping

  Can you please let me know on the quickest and efficient way to compare a large set of values. Its like there are a list of parent codes(string) and each code has a series of child values(string). The child lists have to be compared with each other and find out duplicates and count how many times they repeat. code1(code1_value1, code1_value2, code3_value3, ..., code1_valueN); code2(code2_value1, code1_value2, code2_value3, ..., code2_valueN); code3(code2_value1, code3_value2, code3_value3, ..., code3_valueN); . . . codeN(codeN_value1, codeN_value2, codeN_value3, ..., codeN_valueN); The lists are huge say like there are 100 parent codes and each has about 250 values in them. There will not be duplicates within a code list. Doing it in java and the solution i could figure out is. Store the values of first set of code in as codeMap.put(codeValue, duplicateCount). The count initialized to 0. Then compare the rest of the values with this. If its in the map then increment the count otherwise append it to the map. The downfall of this is to get the duplicates. Another iteration needs to be performed on a very large list. An alternative is to maintain another hashmap for duplicates like duplicateCodeMap.put(codeValue, duplicateCount) and change the initial hashmap to codeMap.put(codeValue, codeValue). Speed is what is requirement. Hope one of you can help me with it.

  Read the article

• Entity Framework: Detect DBSchema for licensing

  - by Program.X

  We're working on a product that may or may not have differing license schema for different databases. In particular, a lower-tier product would run on SQLExpress, but we don't want the end user to be able to use a "full-fat" SQL install - benefiting from the price cut. Clearly this must also be the case for other DBs, so Oracle may command a higher price than SQL, for instance (hypothetically). We're using Entity Framework. Obviously this hides all the neatness of accessing the core schema and using sp_version or whatever it is. We'd rather not pre-load the condition by running a series of SQL commands (one for each platform) and see what comes back, as this would limit our DB options. But if necassary, we're prepared to do it. So, is it possible to get this using EF itself? DBContext.COnnection.ServerVersion only returns something like "9.00.1234" (for SQL Server 2005). I would assume (though haven't yet checked - need to install an instance) SQLExpress would return something similar - "pretending" it is full-fat. Obviously, we have no Oracle/MySQL/etc. instance so can't establish whether that returns text "Oracle" or whatever.

  Read the article

• How to load two divs into separate targets with JQuery?

  - by Bussard

  Hi all, I'm trying to achieve two things, both of which I fail to get at. On a server are a series of notes; all contain a div (id=ajxContent). Some notes also contain an additiona div (id=ajxHead). The ajxContent itself contains links (class=clicking) to call the next installment, hence the link destination in a variable. This is my code: $(document).ready(function(){ $( 'a.clicking' ).live('click', function(e){ e.preventDefault(); var theLink = $(this).attr('href'); $('#loadText').load(theLink + '#ajxContent'); $('h1').load(theLink + '#ajxHead'); }); }) Where it fails: 1) the ajxContent gets loaded into the h1 tag as well as in its intended target. 2) when I had set up the code differently, if there was no div id=ajxHead present in a note, the load would nevertheless erase the existing value in the h1 tag. Am I on a totally wrong track here, with two load statements? Input is very welcome, thanks.

  Read the article

• Why won't Internet Explorer (or Chrome) display my 'Loading...' gif but Firefox will?

  - by codeLes

  I have a page that fires several xmlHttp requests (synchronous, plain-vanilla javascript, I'd love to be using jquery thanks for mentioning that). I'm hiding/showing a div with a loading image based on starting/stopping the related javascript functions (at times I have a series of 3 xmlhttp request spawning functions nested). div = document.getElementById("loadingdiv"); if(div) { if(stillLoading) { div.style.visibility='visible'; div.style.display=''; } else { div.style.visibility='hidden'; div.style.display='none'; } } In Firefox this seems to work fine. The div displays and shows the gif for the required processing. In IE/Chrome however I get no such feedback. I am only able to prove that the div/image will even display by putting alert() methods in place with I call the above code, this stops the process and seems to give the browsers in question the window they need to render the dom change. I want IE/Chrome to work like it works in Firefox. What gives?

  Read the article

• Are workflows good for web service business logic?

  - by JL

  I have a series of complex web services that are getting used in my SOA application. I am generally happy with the overall design of the application, but as the complexity grows, I was wondering if Windows Workflow might be the way to go. My motivations for this are that you can get a graphic representation of the applications functionality, so it would be easier to maintain the code by its business function, rather than what I have now ( a standard 3 tier class library structure). My concerns are: I would be inducing an abstraction in my code, and I don't want to spend time having to deal with possible WF quirks or bugs. I've never worked with WF, is it a solid technology? I don't want to hit any WF limitations that prevent me from developing my solution. Is a WF even the right solution for the task? Simply put I am considering writing my next web service in this app to call a WF, and in this work flow manage the tasks the web service needs to carry out. I think it will be much neater and easier to maintain than a regular c# class library (maintainable by namespaces, classes ). Do you think this is the right thing to do? I'm hoping for positive feedback on WF (.net 4), but brutal honestly at the end of the day would help more. Thanks

  Read the article

• The most efficient way to calculate an integral in a dataset range

  - by Annalisa

  I have an array of 10 rows by 20 columns. Each columns corresponds to a data set that cannot be fitted with any sort of continuous mathematical function (it's a series of numbers derived experimentally). I would like to calculate the integral of each column between row 4 and row 8, then store the obtained result in a new array (20 rows x 1 column). I have tried using different scipy.integrate modules (e.g. quad, trpz,...). The problem is that, from what I understand, scipy.integrate must be applied to functions, and I am not sure how to convert each column of my initial array into a function. As an alternative, I thought of calculating the average of each column between row 4 and row 8, then multiply this number by 4 (i.e. 8-4=4, the x-interval) and then store this into my final 20x1 array. The problem is...ehm...that I don't know how to calculate the average over a given range. The question I am asking are: Which method is more efficient/straightforward? Can integrals be calculated over a data set like the one that I have described? How do I calculate the average over a range of rows?

  Read the article

• Client side page call/scrape?

  - by Silvre

  Here is the problem: I have a web application - a frequently changing notification system - that runs on a series of local computers. The application refreshes every couple of seconds to display the new information. The computers only display info, and do not have keyboards or ANY input device. The issue is that if the connection to the server is lost (say updates are installed and a server must be rebooted), a page not found error is displayed). We must then either reboot all computers that are running this app, OR add a keyboard and refresh the browser, OR try to access each computer remotely and refresh the browser. None of these are good options and result in a lot of frustration. I cannot change the actual application OR server environment. So what I need is some way to test the call to the application, and if an error is returned or it times out, continue trying every minute or so until the connection is reestablished. My idea is to create a client-side page scraper, that makes a JS request to the application (which displays basic HTML), and can run locally on the machine, no server required. If the scrape returns the correct content, it displays it. If not it continues to request the page until the actual page content is returned. Is this possible? What is the best way to do it?

  Read the article

• Perl Capture and Modify STDERR before it prints to a file

  - by MicrobicTiger

  I have a perl script which performs multiple external commands and prints the outputs from STDERR and STDOUT to a logfile along with a series of my own print statements to act as documentation on the process. My problem is that the STDERR repeats ~identical prints as example below. I'd like to capture this before it prints and replace with the final result for each of the commands i run. blocks evaluated : 0 blocks evaluated : 10000 blocks evaluated : 20000 blocks evaluated : 30000 ... blocks evaluated : 3420000 blocks evaluated : 3428776 Here's how I'm getting STDOUT and STDERR my $logfile = "Logfile.log"; #log file name #--- Open log file for append if specified --- if ( $logfile ) { open ( OLDOUT, ">&", STDOUT ) or die "ERROR: Can't backup STDOUT location.\n"; close STDOUT; open ( STDOUT, ">", $logfile ) or die "ERROR: Logfile [$logfile] cannot be opened.\n"; } if ( $logfile ) { open ( OLDERR, ">&", STDERR ) or die "ERROR: Can't backup STDERR location.\n"; close STDERR; open ( STDERR, '>&STDOUT' ) or die "ERROR: failed to pass STDERR to STDOUT.\n"; } and closing them close STDERR; open ( STDERR, ">&", OLDERR ) or die "ERROR: Can't fix that first thing you broke!\n"; close STDOUT; open ( STDOUT, ">&", OLDOUT ) or die "ERROR: Can't fix that other thing you broke!\n"; How do I access the STDERR when each print is occurring to do the replace? Or prevent it from printing if it isn't the last of the batch. Many Thanks in advance.

  Read the article

• Making firefox refresh images faster

  - by Earlz

  I have a thing I'm doing where I need a webpage to stream a series of images from the local client computer. I have a very simple run here: http://jsbin.com/idowi/34 The code is extremely simple setTimeout ( "refreshImage()", 100 ); function refreshImage(){ var date = new Date() var ticks = date.getTime() $('#image').attr('src','http://127.0.0.1:2723/signature?'+ticks.toString()); setTimeout ("refreshImage()", 100 ); } Basically I have a signature pad being used on the client machine. We want for the signature to show up in the web page and for them to see themselves signing it within the web page(the pad does not have an LCD to show it to them right there). So I setup a simple local HTTP server which grabs an image of what the current state of the signature pad looks like and it gets sent to the browser. This has no problems in any browser(tested in IE7, 8, and Chrome) but Firefox where it is extremely laggy and jumpy and doesn't keep with the 10 FPS rate. Does anyone have any ideas on how to fix this? I've tried creating very simple double buffering in javascript but that just made things worse. Also for a bit more information it seems that Firefox is executing the javascript at the correct framerate as on the server the requests are coming in at a constant speed. But the images are only refreshed inconsistently ranging from 5 times per second all the way down to 0 times per second(taking 2 seconds to do a refresh) Also I have tried using different image formats all with the same results. The formats I've tried include bitmaps, PNGs, and GIFs (GIFs caused a minor problem in Chrome with flicker though) Could it be possible that Firefox is somehow caching my images causing a slight lag? I send these headers though: Pragma-directive: no-cache Cache-directive: no-cache Cache-control: no-cache Pragma: no-cache Expires: 0

  Read the article

• Background image css opera issue

  - by user356243

  Am having an issue in opera. I have a series on hyperlinnks in a ul li with backgorund images applied. The pointer cursor isnt displaying when I hover over the links. Is this a know bug, code below /cricket" title="Cricket" id="cricket-link" style="background-image:url(/wp-content/themes/blank2L/images/sidebar-cricket-bg.jpg);" onmouseover="$().hoverSidebarImage('/wp-content/themes/blank2L/images/sidebar-cricket-bghover.jpg', 'cricket'); return false;" onmouseout="$().originalSidebarImage('/wp-content/themes/blank2L/images/sidebar-cricket-bg.jpg', 'cricket'); return false;"Cricket #sidebar ul { margin: 0; padding: 0 0 27px 16px; display: block; float: left; width: 180px; } #sidebar ul li { background-image: url(images/left-nav-bg.jpg); background-repeat: no-repeat; margin: 0; margin-bottom: 10px; padding: 0; display: block; float: left; width: 180px; height: 40px; list-style-type: none; cursor:pointer !important; } #sidebar ul li a { background-repeat: no-repeat; background-position: 2px 2px; margin: 0; padding: 8px 8px 0 4px; display: block; float: left; width: 168px; height: 32px; color: #ffffff; font-family: Helvetica, Arial, sans-serif; font-size: 18px; font-weight: bold; text-align: right; cursor:pointer !important; }

  Read the article

• How do I gather data from the same collumn in multiple worksheets in a single workbook?

  - by infiniteloop91

  Okay so here is what I want to accomplish. For this example I have a single workbook composed of 4 data sheets plus a totals sheet. Each of the 4 data sheets has a similar name following the same pattern where the only difference is the date. (Ex. 9854978_1009_US.txt, where 1009 is the date that changes while the rest of the file name is the same). In each of those documents column F contains a series of number that I would like to find the sum of but I will have no idea how many cells in F actually contain numbers. (However there will never be additional information below it the numbers so I could in theory just add the entire F column together). I will also add new files to the workbook over time and do not want to have to rewrite the code of which I gather my data from column F. Essentially what I would like to accomplish is for the 'totals' document to take every column F from documents in the workbook with the name of '9854978_????_US.txt', where the question marks change based on the file name. How would I go about doing this in pure Excel code?

  Read the article

• synchronizing reads to a java collection

  - by jeff

  so i want to have an arraylist that stores a series of stock quotes. but i keep track of bid price, ask price and last price for each. of course at any time, the bid ask or last of a given stock can change. i have one thread that updates the prices and one that reads them. i want to make sure that when reading no other thread is updating a price. so i looked at synchronized collection. but that seems to only prevent reading while another thread is adding or deleting an entry to the arraylist. so now i'm onto the wrapper approach: public class Qte_List { private final ArrayList<Qte> the_list; public void UpdateBid(String p_sym, double p_bid){ synchronized (the_list){ Qte q = Qte.FindBySym(the_list, p_sym); q.bid=p_bid;} } public double ReadBid(String p_sym){ synchronized (the_list){ Qte q = Qte.FindBySym(the_list, p_sym); return q.bid;} } so what i want to accomplish with this is only one thread can be doing anything - reading or updating an the_list's contents - at one time. am i approach this right? thanks.

  Read the article

• javascript created input[type="text'] doesn't post it's variable

  - by ivannovak

  hey there, I'm creating a series of input elements and for some reason their values aren't $_POSTing. Any light shed on the subject would be appreciated! My current code is as follows: javascript Afields = 1; function addAdultInput() { if (Afields != 10) { document.getElementById('adultMembers').innerHTML += "<input type='text' value='' name='adult_members_"+Afields+"' /><br />"; Afields += 1; } else { document.getElementById('adultMembers').innerHTML += "Only 10 Adult Member fields allowed."; document.getElementById('addAdultMember').disabled=true; } } HTML <form name="form1" method="post" action=""> <tr> <td class="style12" valign="top">Adult Members' Names:<br /><small>10 Max </small><input id="addAdultMember" type="button" onclick="addAdultInput()" name="add" value="Add Adult" /></td> <td id="adultMembers"> <span class="erorr">*for paid members only</span><br /> <input type='text' value='' name='adult_members_0' /><br /> </td> </tr> <input type="submit" name="Submit" value="Register"> </form>

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >