Search Results

Search found 29588 results on 1184 pages for 'really'.

Page 173/1184 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• windows cant "see" camera

  - by user330401

  So I bought a lil emerson camera and I am trying to get it to read the thing on windows 7. The instructions for the camer say when you first hook it up via usb AUTOPLAY will come up and your good to go. Well that worked for me the first time I hooked it up. However the 2nd time, it started trying to install drivers. Since then I can't get it to show up in windows explorer. I have tried disabling and uninstalling everything and trying to start from scratch but its useless, I'm stuck with having to pull the sd card everytime. I really dont like doing this as its a cheap camera, so if I can fix the communication between the devices via usb I would be really happy. As of right now the device installation shows a checked USB COMPOSITE DEVICE and 3 X'd GENERIC IMAGE DEVIC. Can someone please help me get this sorted. PS there are no drivers for this camera, not in the packaging, not available from emerson, and to be honest it shouldn't need any. The only function the camera has when hooked up via USB is charging and access to the DCIM. The charging still works, but the drive just won't load. Any suggestions?

  Read the article

• Is something infecting my Google searches?

  - by hippietrail

  I starting doing some experimentation toward making a browser userscript for Google searches and when opening the JavaScript console noticed something that strikes me as very fishy: The page at https://www.google.com.au/search?oq=XYZ&sourceid=chrome&ie=UTF-8&q=XYZ displayed insecure content from http://50.116.62.47/js/chromeServerV45.js. The page at about:blank displayed insecure content from http://96.126.107.154/amz/google.php?callback=a&q=XYZ&country=US. (XYZ is a placeholder for whatever the search terms really was.) Is it likely that I've picked something like a drive-by browser infection? I've tried all kinds of searches for these URLs and other keywords but I've had no luck finding anything conclusive about whether they're malicious or what they are: 50.116.62.47 chromeServerV45.js 96.126.107.154 amz/google.php The only extensions I have installed are either widely used or written by myself. But something else is strange and I'm not sure if it's just a coincidence. I updated my Windows Chrome browser today to version 23.0.1271.64 m and now my Extensions tab as well as my settings tab are blank, so I can't try disabling my extesions. Here's some discussion I've been able to find so far but not really understand and make sense of: for 96.126.107.154 : "anomalous-javascript-pt2"

  Read the article

• Are Colocation Cross Connects Worth While

  - by SvrGuy

  We currently operate three clusters of collocated machines in different data centers. Recently, I became aware that our newest data center will offer to cross connect us to a bandwidth provider free of charge. In the past, I never really investigated a cross connect for bandwidth because I figured that the rates would be similar to what we are paying the colo now and that it would reduce our resiliency (because we would only be using one or two carriers for IP, where as the colo uses, say 8 different providers). Then I saw an ad for hurricane electric internet services (http://he.net/cgi-bin/ip_transit_quote) that gave a price for IP transit at $1/Mbs, which is much better than the $30/Mb we pay for the blended bandwidth. What are people out there typically paying for bandwith via cross connect and how hard is to setup? Is my understanding that what you do is open agreemetns with two or three ISPs, cross connect to them and then configure your top of rack router on their network. Can you really get IP transit down to a couple of dollars per megabit per month just by doing the routing yourself? Or, is my understanding of cross connection fundamentally wrong?

  Read the article

• Using AddEncoding x-gzip .gz without actual files

  - by STATUS_ACCESS_DENIED

  With Apache (2.2 and later) how can I achieve the following. I want to transparently compress using GZip encoding (not plain Deflate) the output when a certain file is queried with its name plus the extension .gz, where the .gz version doesn't physically exist on disk. So let's say I have a file named /path/foo.bar and no file foo.bar.gz in the folder to which the URI /path maps, how can I get Apache to serve the contents of /path/foo.bar but with AddEncoding x-gzip ... applied to the (non-existing) file? The rewrite part appears to be easy, but the problem is how to apply the encoding to a non-existent item. The other way around also seems to be simple as long as the client supports the encoding. Is the only solution really a script that does this on the fly? I'm aware of mod_deflate and mod_gzip and it is not what I'm looking for - at least not alone. In particular I need an actual GZIP file and not just a deflated stream. Now I was thinking of using mod_ext_filter, but couldn't bridge the gap between rewriting the name of the (non-existent) file.gz to file on one side and the LocationMatch on the other. Here's what I have. RewriteRule ^(.*?\.ext)\.gz$ $1 [L] ExtFilterDefine gzip mode=output cmd="/bin/gzip" <LocationMatch "/my-files/special-path/.*?\.ext\.gz"> AddType application/octet-stream .ext.gz SetOutputFilter gzip Header set Content-Encoding gzip </LocationMatch> Note that the header for Content-Encoding isn't really needed by the clients in this case. They expect to see actual GZIP files, but I want to do this on-the-fly without caching (this is a test scenario).

  Read the article

• Dual boot nt4 and windows 98

  - by ItFinallyWorks

  I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

  Read the article

• SQL Server 2005 standard filegroups / files for performance on SAN

  - by Blootac

  I submitted this to stack overflow (here) but realised it should really be on serverfault. so apologies for the incorrect and duplicate posting: Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

  Read the article

• Registering publicly Mail server and Web server in a free dns server

  - by Bruno Vieira

  I'm trying to host the e-mails and the site of our company into our private server. I've already followed the Gentoo Virtual Mailhosting System with Postfix Guide and my mail server is working (actually it sends mails for the local users and for external users it goes to spam) and know how to set an Apache 2 server. What I don't know (and I mean really don't) is how to make them public. I did some research and found that I should ask my ISP to change the reverse DNS to my company domain in order to prevent my mails to be marked as spam, they are doing. I already know I have to configure a DNS Server, it seems like my register provider already has one but I don't know how I can configure CNET, A, MX, TXT and all those tags (Is it tags the name?) and If I must do some other configuration on my server. My Server: Linux mail 3.2.21-gentoo #1 SMP My /etc/hosts: 127.0.0.1 mail.example.com.br example example.com.br ::1 mail.example.com.br mail example.com.br My /etc/conf.d/hostname: hostname ="mail" What am I missing? If there's a guide about how to configure I would really be grate. Thanks in advance for the help. Cheers

  Read the article

• Why my 2nd ip from traceroute is not answering the ping anymore?

  - by Pedro77

  My Internet is really laggy today, I did a tracerout and I realize that I'm having no answer from an ip at the beginning of the traceroute. see: Tracing route to 12.129.202.154 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.1 2 * * * Request timed out. 3 8 ms 8 ms 8 ms bd044008.virtua.com.br [189.4.64.8] 4 9 ms 8 ms 8 ms bd044009.virtua.com.br [189.4.64.9] 5 26 ms 26 ms 24 ms embratel-T0-1-5-0-tacc01.cas.embratel.net.br [200.174.243.21] 6 360 ms 15 ms 12 ms ebt-T0-15-0-12-tcore01.ctamc.embratel.net.br [200.244.140.218] 7 330 ms 349 ms 261 ms ebt-Bundle-POS11942-intl04.mianap.embratel.net.br [200.230.220.10] 8 139 ms 141 ms 139 ms sl-st30-mia-.sprintlink.net [144.223.64.221] Connection diagram: PC - Router configured as access point - Router (192.168.0.1) - Cable modem (192.168.100.1). Well, I think it is odd that the 2nd ip is not returning the ping. I looked some old tracerout logs to see what was the 2nd ip. The ip was: 10.19.0.1 So, what this 2nd ip stand for? How can I find why it is not answering the ping? I don't understand it, if does not answer the ping, how can the packets continue (yeah newbie question)? edit: well, because the hope 3 have a ping of 8 ms the hop 2 request time out should really not be a problem. But it is still odd that the 2nd hop stopped to answer ping request. So my doubts are: 1. Were the ip 10.19.0.1 is from? 2. Why it stopped to answer ping requests? 3. How can hop 7 be smaller than 6 and 8 smaller than 7 and 6!?? Shouldn't the pings be higher for each hop? Like: hop 3 time should be the sum of the hops before it plus its own time (hop 3 = 1+2+3) ??

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  Hello, I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• Windows 7 Unidentified Network problem. Cannot connect to the internet.

  - by Gordon

  This is my first time on this website, but I was told this was a good place to ask this. I basically have a problem with Windows 7 connecting to my home network. It keeps identifying my home network as unidentified, and it continually does "identifying" until it simply say cannot connect to the Internet. I don't know how this problem occurred. It simply happened one morning. I am running Windows 7 Ultimate. I have a Realtek Network adapter. I don't think its the drivers. I have already tried system restore to a date when my computer was working fine but it still didn't fix the problem. From what Ive read online there was this bug in the services.msc area, something to do with Bonjour service. I cannot find either so I do not think that was the problem. I'll be online for a while, so I can provide any additional details if needed. I don't really know how to explain it because its so fudging complicated. I really appreciate clear and open steps to solving this. I have tried some things like system restore and rolling back drivers, doesn't seem to help.

  Read the article

• How can I tell if a replacement display is compatible with my laptop?

  - by moraleida

  I have an Acer Aspire 4810TZ from 2010 which I truly love - it's a 3 year old notebook that still carries on for about 5 to 6h straight off the battery. I've also invested in it with an SSD and extra RAM and it's fine for my use right now. I'd really rather not just dump it. Now... its screen is dead and I'm looking for replacement parts, but it turns out to be a kind of expensive display - AUO B140XW02 14" LED. US$ 125 was the cheapest I found here (Rio de Janeiro, Brazil). The official dealer sells them for US$ 175. I'm aware of How do I know if a LCD is compatible with my Laptop? and Can I replace a laptop screen with one of a different resolution? but the answers don't really help me in this case. Also Replacing an LCD screen in a laptop gives me a hint but I'm completely dumb at hardware so this is why i'm asking: Is it possible to buy an LCD or a lower grade LED screen with the same connectors? What characteristics should I look for to find out if a certain display is compatible?

  Read the article

• Turning Google Apps mail inbox into Support Ticket System

  - by Saif Bechan

  I have an account at Google apps and most of my email is done trough Gmail. Now I just manually respond to support email. I was wondering if there is an easy way using filters and auto responders to create a support ticket system. I think something like this would be great, but is it possible: Gmail has to make a unique ID for every email that comes in. After that all the other incoming mails should be grouped using that unique ID and not grouped by email. Something like that, or are there things I am not taking into account. I really don't want to use separate software for this, because I think with some small configurations this can do the trick quite well. Or are there some free apps on the marketplace that do this already. I have searched for this but cannot find any. Sorry if this is not an SF question. I really didn't know which is the best fit for this question. This can be migrated to anywhere if someone things it would be answered better there.

  Read the article

• some windows 8 metro (modern UI) apps don't open, but live tiles DO work

  - by DiegoDD

  Some of my default windows 8 metro (modern UI) apps don't work properly, the apps are the Weather and the News apps. when I open them, I only get the loading screen, that is, the big colorful screen with the logo in the center, and the "loading" spinning dots. They just keep like that forever and never actually open. There are no error messages or anything. The strange this is that the live tiles for those apps DO work and show current information. current weather for my location (saved before they started failing) and current news. Both apps did work well in the past, and every other default windows 8 app I've tried work well (both live tiles and the app itself). Every other non-default apps that I've downloaded still work correctly, so the problem so far is only with those two apps. (weather and news). I really don't know since when exactly they started to fail because I really don't use them (or any metro app) that often, so I can't recall if I did something like installing some other app, either metro or regular, or messed with some drivers, etc. they simply don't open now, but they DID work before. any ideas?

  Read the article

• VPN Trunk Between Cisco ASA 5520 and DrayTek Vigor 2930

  - by David Heggie

  I'm a bit of a VPN newbie, so please go easy on me ... I'm trying to use the VPN trunking capabilities of the DrayTek Vigor 2930 firewall to bond two IPSec VPN connections to a Cisco ASA 5520 device and I'm getting myself tied in knots and hope someone here with more knowledge / experience can help. I have a remote site with two ADSL connections and the DrayTek box. The main office site has the Cisco ASA device. I am able to setup a single IPSec connection between the two sites on either of the ADSL connections' public IP addresses, but as soon as I try to use the VPN bonding, nothing works. The VPN tunnels are both still up, but the traffic is getting lost somewhere. I suspect it's due to the ASA not knowing how to route the traffic back over the VPN - one minute, traffic from my remote office's network is coming from public ip address #1, the next it's coming from public address #2 and it doesn't know what to do. Well, that's my newbie impression of what's going wrong, but I don't really know: If this is really what's happening If what I'm trying to do (bond two VPN connections from a single remote network to improve the bandwidth / resiliency) is possible with the kit I've got Could anyone help?

  Read the article

• CentOS security for lazy admins

  - by Robby75

  I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

  Read the article

• Need help diagnosing my machine

  - by Tom Collins

  I have something that just slows my computer to a crawl sometimes. Not running anything big. Yesterday all I had running (besides background apps) were Firefox & Windows Explorer and could barely even switch screens. Nothing showing up in the task manager as hogging CPUs. I have all non-essential services stopped (MySQl & MSSQL) unless I need them. I made some restore points not long ago, but they disappeared. This is a development mach with a LOT of apps installed, so I really, really do not want to re-install Windows. So, what I'm looking for are ideas or tools I can use to help diagnose this problem. The only clues I have is this started right after I installed Office 2013 (with Office 2010 still installed as well) installed Visual Studio 2012 (also keeping 2010 as a co-install) and installed MSSQL 2012 (upgrade from 2008, no co-install) Also, computer runs fine in Safe Mode. I've just ran out of ideas of what to check. Any help / suggestions would much appreciated. Thanks P.S. I'm running Win 7 Pro (x64). Office is also 64 bit. Visual Studio & MSSQL are 64 bit if that option was available (not sure).

  Read the article

• What folders to encrypt with EFS on Windows 7 laptop?

  - by Joe Schmoe

  Since I've been using my laptop more as a laptop recently (carrying it around) I am now evaluating my strategy to protect confidential information in case it is stolen. Keep in mind that my laptop is 6 years old (Lenovo T61 with 8 GB or RAM, 2GHz dual core CPU). It runs Windows 7 fine but it is no speedy demon. It doesn't support AES instruction set. I've been using TrueCrypt volume mounted on demand for really important stuff like financial statements forever. Nothing else is encrypted. I just finished my evaluation of EFS, Bitlocker and took a closer look at TrueCrypt again. I've come to conclusion that boot partition encryption via Bitlocker or TrueCrypt is not worth the hassle. I may decide in the future to use Bitlocker or TrueCrypt to encrypt one of the data volumes but at this point I intend to use EFS to encrypt parts of my hard drive that contain data that I wouldn't want exposed. The purpose of this post is to get your feedback about what folders should be encrypted from the general point of view (of course everyone will have something specific in addition) Here is what I thought of so far (will update if I think of something else): 1) AppData\Local\Microsoft\Outlook - Outlook files 2) AppData\Local\Thunderbird\Profiles and AppData\Roaming\Thunderbird\Profiles- Thunderbird profiles, not sure yet where exactly data is stored. 3) AppData\Roaming\Mozilla\Firefox\Profiles\djdsakdjh.default\bookmarkbackups - Firefox bookmark backup. Is there a separate location for "main" Firefox bookmark file? I haven't figured it out yet. 4) Bookmarks for Chrome (don't know where it's bookmarks are) and Internet Explorer ($Username\Favorites) - I don't really use them but why not to secure that as well. 5) Downloads\, My Documents\ and My Pictures\ folders I don't think I need to encrypt, say, latest service pack for Visual Studio. So I will probably create subfolder called "Secure" in all of these folders and set it to "Encrypted". Anything sensitive I will save in this folder. Any other suggestions? Again, this is from the point of view of your "regular office user".

  Read the article

• Cannot Kill Process in Vista 64

  - by JanSolo

  Hi I have a weird situation where a Zombie process is causing my Vista64 Dev machine to become useless. I use Incredibuild 3.40 to distribute builds of a large software product that I work on. Occasionally, a build will fail and a Zombie process is left behind. The process holds a handle to a file that is needed by the build system to retry the build. Since I cannot kill the process, the handle remains open and I cannot build my code at all. I've tried TargetManager and ProcessExplorer, but neither can kill this process. It gets worse; since Vista cannot kill all its processes, my PC refuses to shut down correctly, requiring a hard reboot after each failed build. Is there a way to really-really-kill a process in Vista? Or maybe a way to force a file handle to close? Any help is appreciated. Cheers Jan. EDIT: This is still occurring. I've used Lockhunter (which appears to successfully unlock the file handle), but retrying the build still fails because the (now unlocked) file cannot be deleted. Explorer and Lockhunter both fail to delete the file. LockHunter also tells me that there are no processes that hold handles to it. Basically, nothing owns it, but you still cant delete it. This sucks.

  Read the article

• Migrate Domain from Server 2008 R2 to Small Business Server 2011

  - by josecortesp

  I'm looking for some advice here, rather than the big how to do it I'm looking for what do to I have this home server, quad core and 4 GB of ram (I really can't afford more right now). With a Windows Serve 2008 R2 With ActiveDirectory and a Hyper-V-Virtual machine with SharePoint, TFS and a couple of more thigs. I have a least 10 remote users, all of them joined a Hamachi VPN (working great by the way). But I want to migrate that to a Small Business Server 2011 Standard. I tried to make a VM to join the domain and then promote that VM, back up it and then format the physical server, boot up the VM, Promote the Phisical and then erase the VM, but I can't do that because of SBS requiring a least 4 GB of ram to install (so I can't give all the 4 GB of physical ram to a VM). I was thinking in using a laptop (All the clients are laptop) as a temporal server, join the domain, promote it, then format the server and install SBS on the server and do all again. I really need some advice. Thanks in advance. BTW, I know that the software I'm using is kindda expensive, and I can't afford more hardware. I have access to MS downloads by a University partnership so I have all this software for free.

  Read the article

• Windows 8: Clean Install Fails BEFORE country Screen

  - by Mark

  G'day, I've been trying to (clean) install Windows 8 on my PC now for over two weeks now, and it's really getting old. You can see here that I've outlined my issue to the Windows Technical Community, which has resulted in... absolutely no help at all. http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/windows-8-clean-install-fails-before-country/64229d0a-0220-45a9-bdc6-c41062df8a75 Tl;dr? Yeah, me too. Basically, I've shrunk the HDD, it's working (I'm on that PC on XP). I've put both the x64 and the x86 DVD's, AND an another HDD with W8 installed on it from my test machine, and they ALL Fail to load. (I get the slanty windows logo, and after about 10 seconds BOOM. Sad face error screen.) I really don't want to have to remove the video card, or the unevenly/not partnered DIMM in the 2nd Memory channel - because the case is .. stupid, and in an awkward spot, but I'm running out of ideas! PS. I tried turning on ACHI tonight. All that resulted in was XP wigging out about new drivers & explorer.exe crashing. Fun times! :(

  Read the article

• DMG mounting warning message says "it may make computer less secure or cause other problems"

  - by Cawas

  When I try to open a DMG file I get this: I'll just transcript the image: There may be a problem with this disk image. Are you sure you want to open it? Opening this disk image may make your computer less secure or cause other problems. What does that mean in fact? What's really wrong with it, and what kind of problem can it cause just by mounting? Someone said: When you download a file in Leopard (and Snow Leopard), it's marked as a quarantined file. This occurs by the OS adding an attribute to the file, tagging where it came from (such as "downloaded by Safari"). This is what causes the user to see prompts when running files that were downloaded from the Internet, you may remember being asked to confirm you'd like to launch program XXX downloaded by Safari on XXX date. As a new part of Snow Leopard, files which are tagged with the quarantine attribute also have integrity checked by fsck, and if that verify fails you will see the message you described, triggered by an unused node in the disc image. But really, I didn't get that. What's quarantine? I've just downloaded a file here on SL, tried to open, and got that warning. Apple have a say about quarantine files, and they seem to work the same on Leopards. Plus I have got that file using Google Chrome while that feature seems to work just with Safari.

  Read the article

• BlazeDS first response is VERY SLOW

  - by chibban

  Hi everyone, I have a very strange an annoying problem: I have an appliaction written in Flex 3, with BlazeDS 3.2 and Java in the backend. I'm actually using a portal (liferay) to display portlets that contain Flex movies. When I hit a refresh button on my page, all the Flex movies send a RemoteObject request to the server (using BlazeDS), which should go to java classes and invoke a method (standard BlazeDS usage I 'm guessing). I'm experiencing VERY slow response (14 minutes) on the first hit, while the following hits are much faster. I've enabled the BlazeDS logging (logging level="All") and I also have debug prints coming from my java classes. I also use the "showBusyCursor" attribute for the RemoteObject - so I can see indication of the request being sent from the flex movie. Here is what I see: I hit the refresh button Each movie invokes a RemoteObject request I see a busy sign - in all the movies I see nothing in the log - no BlazeDS prints and no Java prints Wait 14 minutes or so I see BlazeDS prints followed by Java prints I see data populating my flex movies. The really weird thing is that I have the same "application" installed in 4 different computers (on my laptop and in 3 other unix machines), 3 of these installations work well (good response times) and only 1 has the issue I'm describing. I've tried many things, but everything failed. I'd be really happy to get some advice on this. Thanks

  Read the article

• Can I have 2Gbit over 1Gbit Nics

  - by Daniel

  So this really baffles me. Apparently because 1Gbit can transmit data in both directions simultaneously it should be possible to get 2Gbit of data transfer on a single NIC (1Gbit flow seend and 1Gbit receive). People claim that because 1Gbit is full-duplex (almost always) it is exactly 2Gbit in total. My intuition and electrical background tells me that something is not right here 4 twisted pairs 250Mbit capacity each gives 1Gbit. Unless it is really possible to transfer data in both directions simultaneously. I did a test with iperf. Ubuntu server 12.04 <-- MacBook Pro. Both with decent CPU speed. Tested speed of connection individually and on Mac I can see 112MB/s regardless which direction data is going. On Ubuntu with vnstat and ifstat I got 970Mbit speeds. Now, launching iperf in server mode on both machines at the same time and sending data using 2 iperf clients shows that I'm for example on Ubuntu box sending at 600Mbit, and receiving 350Mbit. which adds up to pretty much 1Gbit link. So to me there is no magical 2Gbit. Can someone confirm that or tell why I'm wrong? Another thing that confuses me i the fact that e.g. 24-port switch has for example: Throughput»up»to:»50.6Mpps Switching»capacity:»68Gbps Switch»fabric»speed:»88Gbps Which would suggest thay can handle 2GBit per port.

  Read the article

• Is basing storage requirements based on IOPS sufficient?

  - by Boden

  The current system in question is running SBS 2003, and is going to be migrated on new hardware to SBS 2008. Currently I'm seeing on average 200-300 disk transfers per second total across all the arrays in the system. The array seeing the bulk of activity is a 6 disk 7200RPM RAID 6 and it struggles to keep up during high traffic times (idle time often only 10-20%; response times peaking 20-50+ ms). Based on some rough calculations this makes sense (avg ~245 IOPS on this array at 70/30 read to write ratio). I'm considering using a much simpler disk configuration using a single RAID 10 array of 10K disks. Using the same parameters for my calculations above, I'm getting 583 average random IOPS / sec. Granted SBS 2008 is not the same beast as 2003, but I'd like to make the assumption that it'll be similar in terms of disk performance, if not better (Exchange 2007 is easier on the disk and there's no ISA server). Am I correct in believing that the proposed system will be sufficient in terms of performance, or am I missing something? I've read so much about recommended disk configurations for various products like Exchange, and they often mention things like dedicating spindles to logs, etc. I understand the reasoning behind this, but if I've got more than enough random I/O overhead, does it really matter? I've always at the very least had separate spindles for the OS, but I could really reduce cost and complexity if I just had a single, good performing array. So as not to make you guys do my job for me, the generic version of this question is: if I have a projected IOPS figure for a new system, is it sufficient to use this value alone to spec the storage, ignoring "best practice" configurations? (given similar technology, not going from DAS to SAN or anything)

  Read the article

• Any e-mail client with additional grouping functionality on Mac OS X?

  - by harald

  Hello, I'm very unhappy with my mail experience. I'm receiving a lot of mails from various clients and projects and need a way to better organize them. I would really love to have additional grouping-functionality with the e-mail client. Currently I'm using Mac OS X's Mail.app, but I am not bound to this. So I am open to any Mail.app-plugin or independent mail application commercial or not for Mac OS X -- should support IMAP, though -- but I think this should not be a problem nowadays? With Mail.app i'm doing the following: group by thread sort by datetime descending What I would love to have is not only additional tagging-functionality for e-mails -- I know, that at least thunderbird and postbox support them. I would love to have some additional grouping functionality for these tags -- inside the main mail window. So maybe I can summarize the important points: "native" Mac OS X mail client (no web-mailer please) automatic-tagging functionality (eg.: auto-apply tags by some kind of filter) easy access to tagged mails Easy access to tagged mails: I would really love to have some additional grouping functionality in the mail folders. The mail application should put all tagged mails in a group -- the groups should be sorted by last received e-mail. Inside the group I would still like to have the possiblity to group by thread. or It would be ok to have a list of tags (topics) on the left pane of the mail client. For example postbox: There is the 'accounts-section', there is the 'folders-section' -- but why is there no 'topics-section'? Thanks very much,

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >