Search Results

Search found 10106 results on 405 pages for 'fail fast'.

Page 174/405 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• Perform action based on load avg

  - by sfx

  I'm running some web applications on an debian server and have to struggle with ddos attacks sometimes. It's eating up all my resources and I can't ssh anymore into the server. An idea was to drop all connections if the load avg is too high, so there are still resources for me and accept new connections if the load avg is low enough. Since this has to work under heavy load I'm afraid a cronjob wouldn't be fast enough or take too much resources. tl;dr: Is there a way to configure the behavior if the load avg is above a specific threshold?

  Read the article

• MySQL proxy HA with no need to reconnect after node failure

  - by Matthias

  I use MySQL with Galera wsrep to get synchronous replication, that part it's up and running I need to setup a kind of proxy to handle client connections. Since any node in cluster can fail, clients will not connect nodes directly, but only via proxy. Currently I use Galera Load Balancer which does it work, but with one exception: if one node fails, all clients connected via proxy to that node get connection error and need to reconnect. I have no control over server applications connected to proxy and some of them can't reconnect automatically and need manual restart. So the question is how to force proxy automatically redirect already connected applications to new data node, without need to reconnect?

  Read the article

• Increase performance of Samsung 830 256GB SSD

  - by Robert Koritnik

  I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

  Read the article

• Application Launcher for Hyper-V Server

  - by peterchen

  We are currently in the process of setting up a HyperV R2 Server machine. Though there's not a lot we need to do wihtin the HyperV Server itself, the command line is sure minimalistic. There are a few administrative / Hardware Monitoring tools that we want to run on he machine itself (accessed through remote desktop). I am looking for a simple program/application launcher where we can hook up these maintenance tools (and one to open a new cmd.exe window in case I habitually close the one I'm working in!) However, all tools I tried by now more or less assume explorer is present, and fail in different ways. Before I go and write a simple one myself, any recommendations?

  Read the article

• Why does my computer show a black screen when booting into Windows Vista?

  - by dassouki

  Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

  Read the article

• Creating a vm using Hyper-V causes the host of BSOD

  - by Arcass

  Hi, Problem description: When I try to create a virtual machine, the host bsod part way through the process. From the logs in lookes to fail/hang on the "Creating new VirtualDisckDriver with new VHD" step. The BSOD error code is SYSTEM_SERVICE_EXCEPTION : STOP:0x0000003B When the machine has finished restarting, it looks to have created the vhd and XML files for the vm but it isn't accessable. I have two server bothing behaving in exactly the same way, so I don't believe it's a hardware fault. Has anyone had a similar experince? How did you resolve the problem? NOTES Hardware: HP DL380 G6 BIOS : 2010.03.30 (14 Apr 2010) [Latest from HP website] Inter Hyperthreading: Disabled Intel Virtuazation Technology : Enabled No-Execute Memory Protection: Enabled Mem check reports no errors OS: Windows 2008 Sp2 x64bit fully updated regards Arcass

  Read the article

• How to add exception for backup MX to tumgreyspf?

  - by Waleed Hamra

  I have an Ubuntu raring server running postfix/dovecot as an email server, with tumgreyspf doing greylisting and SPF checks. My problem is that I also have a backup MX server, that is supposed to store my emails temporarily, should my main server ever fails. It usually rejects receiving emails if it finds the main server online and functional. The problem is when it does need to do its job, tumgreyspf rejects all emails from the backup MX with an error like this: Jun 27 16:18:13 hamra postfix/smtpd[28732]: NOQUEUE: reject: RCPT from mxbackup.mydomain.com[x.x.x.x]: 550 5.7.1 <[email protected]>: Recipient address rejected: QUEUE_ID="" SPF Reports: 'SPF fail - not authorized'; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<mxbackup.mydomain.com> any ideas?

  Read the article

• slow DNS resolution

  - by Ehsan

  I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

  Read the article

• IIS's SMTP Pickup timing

  - by fatcat1111

  I have IIS's SMTP server set up as a closed relay, and it's working nicely. I also have an application that writes EML files. If the EML files are written to a temporary directory, then moved to the server's Pickup directory, email is sent as expected. However, if I have the application write the EML files directly to the Pickup directory, the email will often fail to send. This seems to be a race condition: the server starts processing the EML file as soon as it detects it in Pickup, even though the application hasn't completed writing it. The result is the server considers the EML to be malformed, and it punts it to Badmail. While I very much appreciate the server's earnestness, it seems that I need to dial it back a bit for this scenario. Does anybody know if IIS's SMTP server's polling frequency can be configured? I am using IIS7, Windows Server 2008 R2. The application that writes the EML cannot be modified.

  Read the article

• PC won't boot / USB and PS2 keyboards don't work

  - by Truncheon

  My brother's PC has stopped working. He now cannot boot into windows, and he can't access BIOS by pressing the DEL key as no keyboards work. He has tried 4 different keyboards, one of which is PS/2. He tried the USB keyboards on all the USB ports. I don't know why the BIOS would show the message "Floppy disks fail (40)", as there is no floppy disk drive in the PC. He has upgraded from XP to Vista (yes that's right, upgraded keeping the XP drivers, eyes roll). A BSOD occurred in Vista while he was browsing files. What steps should be taken to troubleshoot the problem?

  Read the article

• Windows 8 Activation - Product ID: Not available

  - by Guy Thomas

  The situation: I downloaded Windows 8 RTM from MSDN (I have a subscription). Naturally, I downloaded the product key as well. Windows 8 installed like a dream: lightning fast with no problems. I accepted the product key at the beginning of the install. Next, I thought I would download Updates, but they failed, so I checked the system's activation in Control Panel System. Problem: It returned "Product ID: Not available." There's nothing under "Windows activation" that I can click on, no blue links. I had a 'Chat' with MSDN, who introduced me to SLUI.exe. On Windows 8 it did nothing. (On Windows 7 it is supposed to bring up the Activation Menu). I phoned the Microsoft Activation number, they told me to contact MSDN. MSDN left the 'chat' by telling me to contact Microsoft! Hmm... I wonder if anyone at SuperUser can help?

  Read the article

• IBM laptop remove access-connections

  - by Kevin

  I installed IBM Access Connections on my IBM t61 laptop to manage my wireless connections but it simply will not connect to my network. I want to uninstall it and try the Intel software which is capable to performing the same task. However, when I go into "Control Panel" - "Add/Remove Programs" and try to "Remove" this package, it simply opens up a screen and closes it immediately. This happens too fast for me to see whether its an error. Has anyone encountered this issue ? The event logs do not show any error.

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• Broadcom bluetooth driver for Windows 7 on MacBook Pro

  - by Sergiy Byelozyorov

  I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

  Read the article

• Installing Sharepoint 2007 on Windows Server 2008 R2

  - by ronischuetz

  we are using in our lab a clean installation of Windows Server 2008 R2 which is running as Hyper-V instance. Today we wanted to install a clean installation of Sharepoint 2007 with SP1 on this machine and we explorer an error that we are not able to install it. The setup is comes up with an error which is described here: http://support.microsoft.com/kb/962935 but this is not our szenario. A printscreen of this message can be found here: http://www.ronischuetz.com/images/SP_2007SP1_Inst_Error.png @Microsoft, my personal point of view is that it cannot be that we need to install first 2008, then Sharepoint 2007 with SP1, then SP2 and upgrade to 2008 R2. Nobody is going be happy with this solution and I hope we find a fast way how customers can install Sharepoint direclty on 2008 R2. Anyway, thanks in advance for any further information how we should go on with this issue. The issue is listed here: http://social.msdn.microsoft.com/Forums/en-US/sharepointadmin/thread/91a6be50-9009-43c8-a37c-66cfb83d738f

  Read the article

• opening and closing connection with port happening fastly

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

• Display current layout WITHOUT using Windows's language bar

  - by Shiki

  Basically I love quick launch and pinning is not for me, I can't just pin 50 apps, nor pin them to start menu / use the win + type method. Anyway, Quick Launch works perfectly under Win7 IF you don't use the language bar. If you use it, sometimes (or always) it may fail to start/appear, you have to readd it. So my question is: Is there a tray app, a RainMeter way to show this? (First would be better). Thanks. (Best would be if I could switch layout globally but that train is gone. (Look at the changing global layout. Thank you Microsoft. (Irony included)).

  Read the article

• Currently well suited SATA2-SSDs for Laptop usage

  - by danilo

  I am looking for a solid state drive for my laptop. My dillemma: I have been waiting for the new Intel SSDs since Q3/2010, as I've heard they should be better and cheaper, due to lower memory manufacturing costs. Now it looks like the new Intel drives are very fast, but still expensive. I would still buy one of them if I could benefit from the full speed. My hardware only has a SATA-2 port though. Thus, my question: Is it worthwhile to buy one of those new Intel SSDs made for SATA-3 if I won't be able to use the full speed? Are there any other promising new SSDs that will be released soon? (Inside the next 1-2 months) If I wouldn't make a good deal buying the newer, faster drives, what drives can you recommend? I don't consider this question subjective, as I am mainly looking for answers concerning the SATA-2/SATA-3 conflict.

  Read the article

• Can anyone explain these cpu specs?

  - by Kevin

  Intel® Core™ i7-640M (2.8~3.46GHz, 35W) w/4MB Cache - 2 Cores, 4 Threads - 2.5 GT/s SO i'm buying a new laptop, which i have not done in 6 years. So i am not familiar with any of these cpu specs. It was the highest option for intel for this laptop. So i am assuming it is somewhat fast. But i'd like to learn what these specs mean. Any help would be greatly appreciated. i am not really a computer guy but would love to learn about what I am buying. Thanks!

  Read the article

• Shell script for replacing string in all PHP-files, for each user

  - by Mads Skjern

  Each user has some php-files using a shared database commondb. I want to iterate over all users (in users.csv), and in their home folder (e.g. /home/joe) find all php files recursively, and replace each occurrence of "commondb" with their own databasename, e.g. "joedb" for "joe". I have tried the following: #!/bin/bash # Execute like this: # bash localize.bash users.csv OLDIFS=$IFS IFS="," while read name dummy do echo $name find /home/${name} -name '*.php' -exec sed -i '' 's/commondb/${name}db/g' "{}" \; done < $1 IFS=$OLDIFS for users.csv joe, Joe J george, George G It does not fail, but the files are unchanged. I am quite weak in bash, and I can't figure out how to debug it :/ Can my script be fixed to work?

  Read the article

• 2d & 3d CAD software on the MAC [closed]

  - by Mark Smith

  Hey I was wondering what 2d & 3d CAD softwares people use on the mac? There are a couple of other questions like this on the site but they're over a year old and knowing how fast paced the software game is I thought i'd repost! I use MacDraft for my 2d drafting and the same companies Interiors Pro for my 3d work, have done for a while. I used Rhino 4.0 at uni but being a student I had to find software that wasn't thousands of £$£$!! thus stumbling onto the Microspot products. Anybody using the software or found any other bargains out there?

  Read the article

• Anyone had any issues getting a disk to start on a Walrus storage sytem?

  - by Peter NUnn

  Hi folks, I'm trying to get a Eucalyptus system up and running and have managed to get the cloud controller and node controller running fine, with an instance running in the cloud system, but without any persistent storage. When I try and create a volume I get euca-create-volume -s 10 -z cluster1 VOLUME vol-5F5D0659 10 creating 2010-05-31T09:10:11.408Z but when I try and see the volume I get euca-describe-volumes VOLUME vol-5F5D0659 10 cluster1 failed 2010-05-31T09:10:11.408Z VOLUME vol-5FE9065E 10 cluster1 failed 2010-05-31T09:02:56.721Z I've dug all over the place, but can't seem to turn up a reason the creation would fail or where to start looking to see what the issue might be. Anyone have any ideas where to even start looking for the answer to this? Ta Peter.

  Read the article

• Installing win xp media center 2005

  - by wdizz

  I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

  Read the article

• Input not cleared.

  - by SoulBeaver

  As the question says, for some reason my program is not flushing the input or using my variables in ways that I cannot identify at the moment. This is for a homework project that I've gone beyond what I had to do for it, now I just want the program to actually work :P Details to make the finding easier: The program executes flawlessly on the first run through. All throws work, only the proper values( n 0 ) are accepted and turned into binary. As soon as I enter my terminate input, the program goes into a loop and only asks for the termiante again like so: When I run this program on Netbeans on my Linux Laptop, the program crashes after I input the terminate value. On Visual C++ on Windows it goes into the loop like just described. In the code I have tried to clear every stream and initialze every variable new as the program restarts, but to no avail. I just can't see my mistake. I believe the error to lie in either the main function: int main( void ) { vector<int> store; int terminate = 1; do { int num = 0; string input = ""; if( cin.fail() ) { cin.clear(); cin.ignore( numeric_limits<streamsize>::max(), '\n' ); } cout << "Please enter a natural number." << endl; readLine( input, num ); cout << "\nThank you. Number is being processed..." << endl; workNum( num, store ); line; cout << "Go again? 0 to terminate." << endl; cin >> terminate // No checking yet, just want it to work! cin.clear(); }while( terminate ); cin.get(); return 0; } or in the function that reads the number: void readLine( string &input, int &num ) { int buf = 1; stringstream ss; vec_sz size; if( ss.fail() ) { ss.clear(); ss.ignore( numeric_limits<streamsize>::max(), '\n' ); } if( getline( cin, input ) ) { size = input.size(); for( int loop = 0; loop < size; ++loop ) if( isalpha( input[loop] ) ) throw domain_error( "Invalid Input." ); ss << input; ss >> buf; if( buf <= 0 ) throw domain_error( "Invalid Input." ); num = buf; ss.clear(); } }

  Read the article

• How do you sync photos with your family?

  - by romkyns

  We've always been trying to share photos within our family, despite all living in different countries. This has been very challenging. We have about 50GB of photos that we share with each other. Everyone organizes them differently, so rsync/Syncplicity don't work. Everyone likes their photos on the fast hard drive rather than a slow website with reduced quality, so online sharing websites are a no-go. So far we have been essentially syncing them manually, via a shared folder that new photos are placed to and collected from. This is laborious and prone to errors, that usually leave one of us without all the photos without even knowing. To those who are in a similar situation, how do you solve this?

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >