Search Results

Search found 7685 results on 308 pages for 'job scheduler'.

Page 175/308 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Disk quota problem in Windows Server SBS 2003

  - by deddebme

  I have got a new job and the existing SBS 2003 domain setup is unsecure (i.e. everyone is a domain admin etc etc). There are lots of problem due to inexperienced "network admin", and I am trying to fix them one by one. There exist one issue which I found quite weird, that the "Quota" tab exists in the C:(NTFS) drive but not the D:(NTFS) drive. I played around with gpedit to enable disk quota (it was "not configured" before), but still I can't see that tab. Have you seen this problem before? How did you solve it?

  Read the article

• Sharepoint 2007 Event ID 6482

  - by Dave M

  Our two server SharePoint 2007 SP2 farm has an issue. Event ID 6482 appears in the Application log of the Web front end many times a day. Often many time a minute. The full error is from Office SharePoint Server Event Type: Error Event Source: Office SharePoint Server Event Category: Office Server Shared Services Event ID: 6482 Date: 11/12/2009 Time: 3:05:22 PM User: N/A Computer: XXXXXX Description: Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (36a9b7ef-59aa-4f94-8887-8bf7b56f2f91). Reason: Error during encryption or decryption. System error code 0. Techinal Support Details: System.ArgumentException: Error during encryption or decryption. System error code 0. at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.SynchronizeDefaultContentSource(IDictionary applications) at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize() at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The SharePoint site appears to be functioning normally and Search returns expected results. Any suggestions would be appreciated

  Read the article

• How to make the jump from consumer support to enterprise support?

  - by Zac Cramer

  I am currently a high level consumer break/fix technician responsible for about 300-400 repairs a month. I am good at my job, but bored, and I want to move into the enterprise side of my company, dealing with Server 2008 R2 and exchange and switches and routers that cost more than I make in a month. How do I make this transition? Whats the best thing to learn first? Is there a standard trajectory for making this leap from consumer to business? I am full time employed, so going back to school is not a great option, but I have no life, so spending my nights and weekends reading and practicing is totally within my realm. I am basically overwhelmed by the number of things to learn, and looking for any advice you may have on the best way to proceed. PS - I apologize if this is a not quite the right forum for this, I know its not a technical question exactly, but I also know the sorts of people I want to answer this question are reading this website.

  Read the article

• Small business VPN solution

  - by Crash893

  I've been looking for a while but I'd like to to implement a vpn solution for anywhere from 1-5 employees at a time (possibly 10 in a year or so) edit: Basically I would like outside users to fire up a client or open a web page and be able to access things inside the company network (share drives / printers/ webapps /etc) I've looked at Astaro Gateway but im not sure if that's the right tool for the job. I know "best" is a subjective term so i would like to break it into to different suggestions 1) what is the cheapest solution given the criteria above 2) what solution will result in the least amount of headaches from the point of view of maintenance and learning curve.

  Read the article

• Windows user cannot connect via application, but can via Remote Desktop

  - by C. Ross

  I have an application (ASG-Zena) giving an 1385 error (Logon failure: the user has not been granted the requested logon type at this computer) when trying to run a batch job. I have checked on "Access this computer from the network" includes Everyone and Administrators and many others. "Deny access to this computer from the network" make sure that Guest is not listed there. If you still have problems, then maybe make sure that nothing is listed there. Administrative tools...local security policy..security options "Network access sharing and security model for local accounts" there are 2 options either classic or 'guest only'. Mine is set to classic. (These diagnostics come from this post) The account in question is added to the Administrator group on this computer. I know the login is valid because I regularly login to the server via remote Desktop. What other settings should I check?

  Read the article

• Indenting an x number of lines in vim

  - by Mack Stump

  I've been coding in Java for a job recently and I've noticed that I'll write some code and then determine that I need to wrap the code in a try/catch block. I've just been moving to the beginning of a line and adding a tab. 0 i <tab> <esc> k (repeat process until at beginning or end of block) Now this was fine the first three or four times I had to indent but now it's just become tedious and I'm a lazy person. Could someone suggest an easier way I could deal with this problem?

  Read the article

• Retrieve a domain name based on an IP Address?

  - by Neil Kodner

  I'm reviewing some apache logs, specifically with respect to downloaded files. I'm interested in knowing, if possible, which domain is responsible for the download, given an IP address. I've given nslookup a try and it seems to (mostly) get the job done but it returns all sorts of extraneous information. Ideally, I pass in an IP and receive a domain back. Before I write a shell script to parse the output of nslookup to capture the domain, I'd like to know if this is the best way of approaching this problem, or if there is a more tried-and-true method of doing this. Specifically, I'd like to know if an address resolves to an amazonaws.com domain. I understand that this might be difficult because EC2 machines are dynamically created and destroyed - I'd like to know if the IP addresses for AWS/EC2/EMR machines fit any sort of addressing pattern.

  Read the article

• Good Motherboard for 16/16/4 configurations?

  - by Burnzy

  I am looking for a board that supports 16/16/4 configurations (lga 1366 of course). For 2 graphic cards in SLI (250gts twin frozr) and a revodrive(not bought yet -20-227-578--Product"http://www.newegg.ca/Product/Product.aspx?Item=N82E16820227578&cm_re=revodrive--20-227-578--Product ). This boards seems alright for my needs (http://www.newegg.ca/Product/Product.aspx?Item=N82E16813131665&cm_re=sabertooth--13-131-665--Product), but I am afraid it's going to be too tight for both of my graphic cards. Do anyone know any other board that would do the job? Preferably asus motherboards, as they are the most stable boards I know Thanks for your help!

  Read the article

• Windows Vista: TCP/IP stack is smashed, how to reinstall the LAN-Devices?

  - by Ice

  the TCP/IP stack is smashed, thats why no LAN-Connections are running. I want to download the LAN drivers from another computer and uninstall and reinstall the LAN devices on this system. Hopefully that should recreate the stack. But what to download? What uninstall? How to install? Windows Vista is protected against such changes, so how to achieve that job? please help. Update per 2011-03-11: I found all the tipps and hints about "TCP/IP Repair, LSP Fix, and WinSock Fix" according to windows vista but nothing helped to bring back network access. What can i do as next step or which opportunities are left?

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• ATI Radeon HD 5770 Cooling

  - by Murtez

  I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

  Read the article

• How to take a CSS animation from a browser, and export a GIF of it?

  - by Truth

  I have the following CSS3 Animation going on: http://dabblet.com/gist/2884702. It's basically a simulation of a mirror rotating on its x-axis. Now, I wish to present that in a PowerPoint presentation. Since PowerPoint doesn't have the webkit engine, I want to extract an animated GIF image of that animation, and embed it into my presentation. The problem? No matter what I've tried, I couldn't make a reasonably smooth animated GIF. I've Googled and found many free software which claim to do the job, tried several, none worked as expected. I've tried IrfanView, same issue (also their site makes me want to vomit). So, is there a solution? Or am I doomed to not be able to display it?

  Read the article

• How can we monitor a HTTPS URL?

  - by Animesh

  A couple of our recent customers have had their applications configured for HTTPS only. Currently we are using a tool which does a good job of monitoring customers' app-server state. For the existing customers, HTTP URLs also work, so the tool can monitor the health. But the recent one have only the HTTPS enabled so the tool fails automatically. To this end, I am looking for a tool which would monitor the app-server state and send email to the group. Simple monitoring like checking to see if the app-server is up or not is all I would need. But more features are also definitely helpful. Thanks!

  Read the article

• script to automatically test if a web site is available

  - by Xoundboy

  I'm a lone web developer with my own Centos VPS hosting a few small web sites for my clients. Today I discovered my httpd service had stopped (for no apparent reason - but that's another thread). I restarted it but now I need to find a way that I can be notified by email and/or SMS if it happens again - I don't like it when my client rings me to tell me their web site doesn't work! I know there are probably many different possibilities, including server monitoring software. I think all I really need is a script that I can run as a cron job from my dev host (which is permanently running in my office) that attempts to load a page from my production server and if it doesn't load within say 30 seconds then it sends me an email or SMS. I'm pretty rubbish at shell scripting, hence this question. Any suggestions would be gratefully appreciated, thanks to all you clever sysadmin guys and girls out there :)

  Read the article

• The 'which' command returns nothing via cron, but works via console

  - by Zárate

  Hi there, I've written a little utility in haXe + Neko that needs to execute some GIT commands. To avoid hardcoding the path to the GIT executable I'd like to use the which command to find out where it is. Everything works as expected when running manually from the console, but not when the the app runs on a cron job. I'm aware of the restricted environment (here or here) when you run a script using cron, but still surprised this doesn't work: /usr/bin/which git >> /home/user/git.txt The text file is created but the content is empty. Again, when run from the console it works as expected. Any ideas? I'm running OS X Leopard, if that helps. Thanks : ) Juan

  Read the article

• How to write a ProxyPass rule to go from HTTPS to HTTP in IIRF

  - by Keith Nicholas

  I have a server which is running a web app that self serves HTTP. I'm wanting to use IIS6 (on the same server) to provide a HTTPS layer to this web app. From what I can tell doing a reverse proxy will allow me to do this. IIRF seems like the tool to do this job. There are no domain names involved.... its all ip numbers. So I think I want :- https:<ipnumber>:5001 to send all its requests to the same server but on a different port and use HTTP ( not exposed to the net ) http:<ipnumber>:5000 but not sure how to go about it with IIRF, I'm not entirely sure how to write the rules? I think I need to make a virtual web app on 5001 using HTTPS? then add a rules file.

  Read the article

• Queue'ing cron jobs up to 10 times

  - by webnoob

  Hi All, This kind of touches on another post I made but is different so I have posted it as a new question. I have a script that runs that may take just over 1 minute to process, and my cron is set to run every minute. I can stop another cron job executing the script if the first one hasn't finished by using flock (php) in the file, however, this means that I would lose one iteration of the routine and have to wait nearly a minute before it is triggered again (as my understanding leads me to believe). What I would like to do is if the script is locked, not bomb out, but wait. Over time however, this could get quite high so I would also like to limit the amount of queued cron's to 10. I am a real newbie with Linux (had a Linux VPS for 3 days now) so I am not sure if my solution is even practical. Thanks.

  Read the article

• Apache rewrite module, 404 not found

  - by Eneroth3

  I've been having some problems with rewriting directory styled addresses into query strings for my php scripts. Here's the code RewriteRule ^(\w+)/?(\w+)?/?(\w+)?/?$ /index.php?section=$1&category=$2&subcategory=$3 [QSA] This line works perfectly fine on both my local wamp and lamp server, and my friend's lamp server. However on the web hotel I've been using (freehostia) I only get a 404 error when trying to browse a "directory" that isn't really there (supposed to be generated by php). I've tried connecting their support but they only say 3rd party applications aren't their job. I know rewriteEngine is turned on because some basic redirect attempts have worked. Perhaps this line of code could be better written? It's quite important that extra queries are appended and would be nice (but not necessary) if the last slash could be left out. Any help is appreciated :)

  Read the article

• Is there a lightweight MTA for Ubuntu 9.10 Desktop?

  - by Joe Casadonte

  I'm writing a Perl script to run as a cron job, and I want to email results & errors to a local account on the laptop. I'd like something that can talk SMTP (do any MTAs not adhere to SMTP?). I use Thunderbird 3, so I'll also need a POP/IMAP server (unless T-Bird can read straight from an mbox file; I'll have to check into that). No need for spam controls as I'll lock it down real tight, only accepting mail originating from the laptop itself. Thanks!

  Read the article

• Grep all files in a directory and print matches with file name

  - by javanix

  I have a list of log files that I create as part of a video encoding script that I wrote. I would like to search all of them and print out certain statistics from the encode - how fast they were encoded, what settings were used, etc. I can search for the average framerate in one file via this 1 liner: cat ${filename} | grep average which outputs: work: average encoding speed for job is 23.211176 fps and search for the ratefactor: cat ${filename} | grep RF I would like to search all files in the directory and print off one, or prefereably both pieces of information along with the filename. Is there any way I can use find or grep to get this in a one-liner, or do I need to write a script? I would like output like this: /home/javanix/filename.log <RF line> <average line> I would like this to either work using FreeBSD 9 or Ubuntu 12.04.

  Read the article

• Issue with Capslock key on Laptop

  - by Mr New

  For some reason my laptop has a mind of its own and the Caps Lock tends to come on whenever it feels like it. I thought it was an software issue from that reasoning, but I later cleared the OS and then reinstalled it hoping to fix the problem, but it didn't. Not only does it do that it also comes on and off whenever the letters A, S, and left shift key are pushed. So I assummed it was a keyboard issue and that the keyboard needs to be replaced, but it has one of those touch pad cap lock buttons also, because even when I press that button it tends to not react. So how can that be fixed with a keyboard replacement or is that connected still? EDIT - I followed the direction with the following code in notepad and it didn't do the job: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] “Scancode Map”=hex:00000000 00000000 0200000000 00003A00 00000000

  Read the article

• Unknown/unsupported storage engine: InnoDB | Mysql Ubuntu

  - by Kayle

  I recently upgraded from the previous LTS Ubuntu to Precise and now mysql refuses to start. It complains of the following when I attempt to start it: ?$ sudo service mysql restart stop: Unknown instance: start: Job failed to start And this shows in "/var/log/mysql/error.log": 120415 23:01:09 [Note] Plugin 'InnoDB' is disabled. 120415 23:01:09 [Note] Plugin 'FEDERATED' is disabled. 120415 23:01:09 [ERROR] Unknown/unsupported storage engine: InnoDB 120415 23:01:09 [ERROR] Aborting 120415 23:01:09 [Note] /usr/sbin/mysqld: Shutdown complete I've checked permissions on all the mysql directories to make sure it had ownership and I also renamed the previou ib_logs so that it could remake them. I'm just getting no where with this issue right now, after looking at google results for 2 hours.

  Read the article

• Tools to manage large network of heterogeneous web applications?

  - by Andrew

  I recently started a new job where I've been tasked with managing a global network of heterogenous web applications. There's very little documentation. My first order of business is to create an inventory of all of the web applications. Are there any tools out there to manage a large group of web apps? I'd like to collect a large dataset for each website including: logins for web based control panels logins to FTP/ssh accounts Google analytics tracking code for each site 3rd party libraries used SSL certs, issuers, and expiration dates etc I know I could keep the information in Excel or build a custom database, but I'm hoping there's already a tool out there to help me with this.

  Read the article

• Need an alerting system if my cloning script fails

  - by rahum

  I've configured a nightly rsync to mirror one server to a standby offsite backup server. The total datastore on the primary is 1.5TB. In the course of getting this working, I ran into numerous instabilities with the environment, which I seem to have sorted out, but even though it's now working, I am still nervous. This is intended to be a disaster-scenario standby server, and if disaster strikes and the standby does not have all the proper data synchronized, I'm out of a job. Thus, I want to script a system that will confirm, after each nightly sync, that the destination data matches the source. I realize that rsync does this, but if rsync doesn't complete fully (which was happening during the setup troubleshooting), I need to know. Any suggestions? I'm best with Ruby, if that is relevant for the solution.

  Read the article

• Does Windows Move command delete the file only on successful completion?

  - by IronicMuffin

  This may be a stupid question, but I'm erring on the side of caution here. If I'm using Windows command line/batch files to Move a file from one server to another and we have a network failure, what will happen to the original file? I would assume it remains untouched until fully moved, and then deleted, but I need to be sure. My fear is that it deletes bytes as they are moved, which would be bad. If that isn't the case, is there a better way than Copying the file and Deleting after the copy completes? Thanks for your help. EDIT: I suppose super user would have been better. This is part of a job kicked off by code, so my first thought was to come here.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >