Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 175/315 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• Redirect traffic to local address so iOS speedtest app measures LAN speed

  - by ivan_sig

  I have mounted a Speedtest Mini server on a local LAMP, so I can test my LAN speeds effortlessly just by opening the URL with a Flash enabled web browser, the thing is, I want my iOS and Android devices to test with the LAN server too, not with the WAN, as I'm trying to measure LAN-Only performance. Is there a way so I can redirect the traffic intended to an specific external IP (The one of the real server) to my local server?. I know the servers IP as a short Wireshark analysis gave me the data, but still searching for a way to make that redirect. I have Jailbreak and root on my devices, so playing with system files is not a problem. I've tried mounting a proxy and making redirects by the hosts file and domain names, but it looks like Ookla's app relies on IP address only.

  Read the article

• solving network connection problem on xp

  - by doug

  Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

  Read the article

• Share PC over network

  - by Sachin Verma

  I have a server installed on one local Win7 machine (say as 192.168.2.14:8080/myAPP) and I want to access that server from different computer (say ip as 192.168.2.16). Even they are connected to same network I can't access server from other computer. I guess the problem is in firewall. This is working when I disable firewall and not working when I allow certain ports in windows firewall but keeping firewall on (As a rule to allow incoming connections).

  Read the article

• My Laptop (HP/Compaq 2510p) running ubuntu 10.04 LTS keeps losing the WLAN connection.

  - by Ernelli

  I am using Wicd and can successfully connect to my ADSL router (Thomson TG 787) using WPA PSK. But with regular interval I lose the ability to connect to Internet. I can ping the GW and can actually ping servers on the Internet but not connect to them using HTTP (Tested with both Firefox and wget). I would suspect the router unless for the fact that the problem does not show up when running Windows XP on the same computer and also, when the problem arises, a simple disconnect/connect in Wicd solves the problem, which does not involve the router (Except for the DHCP request). I have searched Ubuntu forums without luck, most problems described relate to specific network drivers or other problems. Does anyone have the same experience with Linux/Ubuntu and WLAN?

  Read the article

• Windows 7 Won't connect to Wireless Router too far away (but still have 3 bars)

  - by Kerry

  I have found this problem a couple of times. Windows 7 with Intel AGN 5100 won't connect to a WPA2-PSK router when it's too far away. Both times I've had this happen I was in a foreign country (London and Stockholm), and both times I was upstairs while the router was downstairs. Now, it still has 2-3 bars when looking at local WiFi, but I get the "will not connect" error, and debugging doesn't help at all (it doesn't know what's wrong). I went downstairs and it connected immediately (but I need to be able to have it upstairs). My Android Cell Phone and iPad were able to connect upstairs just fine. Any suggestions?

  Read the article

• Set web browser (or other program) to use specific network

  - by Will

  my PC is connected to 3 different networks: 2 different LAN connections and a VPN connection. when i am connected to the vpn, i cannot browse to the LAN intranet as the DNS is all going through the vpn and it cannot see the domains on the LAN. Is there a way to set firefox/chrome/etc to use a specific connection, so that i don't have to disconnect from vpn to get to the other intranets?

  Read the article

• Problem creating ODBC connection to SQL Server 2008 with Vista

  - by earlz

  Well, I'm trying to get a database schema thing working, first I tried just doing it in Linux where I'm more comfortable, but ODBC seems to be a hack there and I couldn't get it to work. So I figured it shouldn't be too hard in Windows.. Ok, so I created a SQL Server Client Alias so that I can simply same windowsserver to refer to my SQL server. Then, I went to the ODBC configuration in Control Panel. I clicked Add in the User DSN section. I chose Native SQL Server (10), and then clicked next. Then I typed a short name and a description and gave the servername as windowsserver/SQLEXPRESS Then, I click next, give it my user name and password and click next. Then, after like 2 minutes it says "Login Timeout Expired" What can be wrong here? I know the server is configured cause I have SQL Server Management Studio opened up with that server in it. I'm also just trying to connect over regular TCP/IP and my firewall is disabled.

  Read the article

• How can I make the NetworkManager work?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop, and lately I've been trying various stuff about network configuration through command line. Last night, I tried removing the NetworkManager using "yum remove NetworkManager" from the system, so that I could have more control of the network through the command line. But the result is, I didn't manage to configure the wireless connection through wpa_supplicant, and I need wireless connection during my travel to another place. So I need the wireless function back as soon as possible. I typed " yum install NetworkManager", some version installed, but I don't get to have an icon on the taskbar, and of course, the network doesn't work. The package I previously removed(about 24MB) was much larger that the one I just installed(about 2MB), so I think some dependencies must be missing. How could I install all these dependencies? Please help!

  Read the article

• Xen DomU does not have network connectivity

  - by Prakashkumar Thiagarajan

  I am trying to install Xen on my Fedora box. Dom0 image has network connectivity. But when I try to create a DomU, it does not have network connectivity. I want to be able to run in bridged mode. I have the /etc/xend/xend-config.sxp file accordingly. My config file looks like kernel = "/boot/vmlinuz-2.6.18-xenU" memory = 64 name = "clientA" vif = ['bridge=xenbr0,mac=12.34.56.78.9A.BC'] root = "/dev/sda1 ro" ramdisk = "/boot/initrd-linux.img" extra = "ro selinux=0.3 initcall_debug" features = 'auto_translated_physmap' Am I missing something ?

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• map linux drives to windwos 7 for media stream over internet

  - by Ortix92

  I'm trying to map a linux network drive to my windows 7 laptop, however this laptop is not on LAN. At home, I simply use Samba, but this obviously won't work over the internet. I'm trying to avoid VPN, so if there are other solutions, I would like to know about them. The reason I ask is because my university does this as well. We can simply map folders to our computers without VPN connections. I'm not sure what they are running as servers. The main reason is because I want to be able to access my files stored on my home server wherever I go. They are located in the /home/ folder (videos, music and pictures folder). I'm trying to keep my websites and media separate from each other. I wouldn't mind accessing them from a web interface either, but I would like to keep the directory structure intact. I remember having an app like that come with winamp and running it on my windows pc (As the server). Unfortunately it doesn't work for linux. Any ideas on what I could use? Would XBMC be able to help me out with this? I did do some researching but I couldn't find any concrete answers

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• Bypass network stack. Which options do we have? Pros and cons of each option [on hold]

  - by javapowered

  I'm writing trading application. I want to bypass network stack in Linux but I don't know how this can be done. I'm looking for complete list of options with pros and cons of each of them. The only option I know - is to buy solarflare network card which supports OpenOnLoad. What other options should I consider and what is pros and cons of each of them? Well the question is pretty simple - what is the best way to bypass network stack? upd: OpenOnload It achieves performance improvements in part by performing network processing at user-level, bypassing the OS kernel entirely on the data path. Intel DDIO to allow Intel® Ethernet Controllers and adapters to talk directly with the processor cache of the Intel® Xeon® processor E5. What's key difference between these techologies? Do they do roughly the same things? I much better like Intel DDIO because it's much easy to use, but OpenOnload required a lot of installation and tuning. If good OpenOnload application is much faster than good Intel DDIO application?

  Read the article

• force connection using USB adapter

  - by James

  Hi all I am new to Linux, so even though this is probably a simple problem it remains unsolved after more then 3 hours of googling :-( I run running ubuntu 10.04 LTS on an Acer Aspire 5520G . the laptop has a wireless adapter, but since I wanted better range I got an Edimax EW-7711USN USB adapter. now , when running ifconfig I am able to see both adapters where as the laptop native adapter is listed as wlan0 and the usb adapter is listed as wlan1. but listing available networks from the wireless network applet , all the connection are listed under wlan0 , the usb adapter is costencly listed as disconnected. this is what I have been trying to do so far 1) ifconfig wlan0 down - I got disconnected from the net but still was not able to get the usb to connect 2) used the wireless connection dialog to connect to a hidden network with the usb adapter - I was able to connect to the network but with no Internet access 3) disable wireless using the laptop function button - both wireless adapters where disabled can anyone suggest a way to connect to to the wireless network using the USB adapter rather then the built in one ? Thanks

  Read the article

• Can't get nmap to work under Windows 7 64 bit

  - by jitbit

  I'm trying to install and run the nmap tool to test my server, but it keeps saying Note: Host seems down. If it is really up, but blocking our ping probes, try -P0 and showing all the server ports are closed. Which is not true - the server is up and has lots of open ports. Any ideas? UPDATE: Just to clarify - the server can be pinged and port-scanned fine by other programs. It's juts nmap that does not work. Even "google.com" seems to be down for nmap.

  Read the article

• Simple server status page hosted externally available for users

  - by Chris

  I am looking for any kind of script - can be asp or php or any other web language - that gives me the ability to log outages and the current state of the network for our organisation. This would be similar to any major Telco's "Network Status" page, but I just want to tell the user's out there if the systems are up and running and have a history of recent outages. This would be for our remote user's so they could go to a webpage (externally hosted from our main site) and see that we are currently having problems with our network. What are other people out there using?

  Read the article

• OSD with ConfigMgr across subnets?

  - by MattUebel

  I am trying to deploy a system image from one subnet to another. Subnet A contains the SCCM server. Subnet B contains the workstation that I want to build. Subnet B contains a DHCP server with a scope configured to service the workstations. How would I configure the DHCP server so that it tells the workstations to look at the SCCM server on Subnet A as its bootserver?

  Read the article

• Ping6 fail on linux

  - by michelemarcon

  I have 2 linux box configured with IPv4. I have tried adding IPv6 to them. I have issued this commands on box1: ip -6 addr add fd32:2d7f:f3c1::1/48 dev eth0 And I get this: inet6 addr: fd32:2d7f:f3c1::1/48 Scope:Global Then I have issued this command on box2: ip -6 addr add fd32:2d7f:f3c2::1/48 dev eth0 Back on box1 (command/response): ping6 fd32:2d7f:f3c1::1 is alive! ping6 fd32:2d7f:f3c2::1 ping6: sendto: Network is unreachable Why doesn't box1 ping box2 (of course, also box2 can't ping box1)?

  Read the article

• Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

  - by William

  I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• Private VOIP network

  - by SuppositoryPlacebo

  I own a small private security services business. Some of my clients require 2-10 security officers per location. I'm trying to think outside the box in order to solve my communications problem. I'd rather not buy or lease hf radios or voip systems at the current rates. I'm wondering if there is an existing system, or if is at all possible, to setup a private communications network using only a server and bluetooth devices or a wifi/bluethooth combination. http://25.media.tumblr.com/tumblr_m44f0pn7BL1rwp6tgo1_1280.png I don't need "radio" per se. I just need a simple, private voip network. Is there an existing device that consists of nothing more than a wifi adapter to control a bluetooth device?

  Read the article

• Route web browsing through a separate iterface

  - by tkane

  I'd like to route web browsing through the wlan0 interface and the rest through eth1. Can you please help me with the iptables commands to achieve this. Below is my configuration. Thank you :) Edit: This is about desktop configuration not a web server set up. Basically I want to use one of my connections to browse the web and the other one for everything else. ifconfig: eth1 Link encap:Ethernet HWaddr 00:1d:09:59:80:70 inet addr:192.168.2.164 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::21d:9ff:fe59:8070/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33 errors:0 dropped:0 overruns:0 frame:0 TX packets:41 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4771 (4.7 KB) TX bytes:7081 (7.0 KB) Interrupt:17 wlan0 Link encap:Ethernet HWaddr 00:1c:bf:90:8a:6d inet addr:192.168.1.70 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:bfff:fe90:8a6d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14256 (14.2 KB) TX bytes:14764 (14.7 KB) route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 1 0 0 eth1 192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 default adsl 0.0.0.0 UG 0 0 0 eth1

  Read the article

• Why my router alows to connect to the internet only after plugging the cord to laptop?

  - by gennad

  Hi all! I'm using Ubuntu 10.10. I have D-link dir-320 wireless router. When I turn on my laptop Lenovo G555, I'm trying to connect to router by it's usually unsuccessful. But if I'll pull the ethernet cord from the router and insert it into my laptop, everything will work well. And if after that I'll pull the ethernet cord from the laptop and insert it into the router, my laptop connects to the router and it will have Internet access via wifi. How to make the laptop directly connects to the Internet after booting without switching the cord?

  Read the article

• Cross subnet connection

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >