Search Results

Search found 48664 results on 1947 pages for 'internet access'.

Page 176/1947 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

  • Netgear CG3000D new Modem/Router - Random High Ping

    - by justin.chmura
    Cox just recently came out and looked at my internet and decided that the modem I had was causing high latency issue. The speed was fine but the ping would spike to around 100 and over when gaming or putting a load more than browsing on the line. After they replaced it, it seems like I get better latency, but when it spikes, I get upwards of over 300 ping with like 500 jitter. I figured I would hit the serverfault universe before sending another email to Cox. I opted not to do the Cox setup as it was an extra $20 which I thought would have just setup the wireless (which I can handle). Is it a setting or something that I missed that needs to be setup? The firmware for the CG3000D is awful and not fun to use. I did change some hidden settings on the RgServices.asp page (I'll attach a screenshot). I've also heard that the Router/Modem combos are awful and that I should go back and just ask for a modem stand-alone. Any input is helpful. All screenshots: http://imgur.com/a/JX6qu#0

    Read the article

  • Rsync over ssh with root access on both sides

    - by Tim Abell
    Hi, I have one older ubuntu server, and one newer debian server and I am migrating data from the old one to the new one. I want to use rsync to transfer data across to make final migration easier and quicker than the equivalent tar/scp/untar process. As an example, I want to sync the home folders one at a time to the new server. This requires root access at both ends as not all files at the source side are world readable and the destination has to be written with correct permissions into /home. I can't figure out how to give rsync root access on both sides. I've seen a few related questions, but none quite match what I'm trying to do. I have sudo set up and working on both servers.

    Read the article

  • Connecting a print/file server with no wired access

    - by PeanutsMonkey
    We currently have a printer server which also serves as a file server. The server is located on premise however is not close to any wired access point i.e. a patch panel or point. The server also requires access to the Internet as it transmits files across. We have a wireless modem and a wireless router. I can run a cable between the server and wireless router. How can I have the wireless router communicate with the wireless modem? If the operating system of the server is concerned, it is running Windows Server 2003.

    Read the article

  • Error when trying to access Shared files from iMac via smb

    - by SatheeshJM
    I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

    Read the article

  • VNC-like remote control over home network

    - by Widor
    I'm aware of how to use VNC to share screens or grant remote control of your machine over the internet by using VNC or one of the web-based "go to my pc" type services. If two computers are connected to a router (i.e. standard home network), is there an easier way of viewing and controlling one computer from the other? I'd like to avoid going outside the LAN, onto the internet, then back in if possible. Both machines are Windows XP, but I'm not looking for Remote Desktop by the way.

    Read the article

  • Lost support for Web Access on Verizon BlackBerry World Edition

    - by Jimsmithkka
    Hello all, I believe that some silliness has occurred with my blackberry after a OS upgrade. I have 2010 Blackberry world edition phone, purchased off a friend who went iPhone, that at first worked with web on the Verizon network. When i connected it to my PC to transfer contacts, it prompted for an OS upgrade, which I performed. Post-Upgrade I have found that i can no longer access any of the web services: eg. AppWorld, Email, Twitter, Browser. And they all state that i need to upgrade my account to gain access. I had a Storm previous to this that worked fine, and at the VZ store they told me this device is no longer supported (new in 2010 though), and they got me a free "upgrade" to the Blackberry flip. What i could use help with is finding a source stating it is discontinued or a guide that will help me re-enable the web features. I can provide further info later if needed (currently at work with the flip, the WorldEdition is at home).

    Read the article

  • Communicate from PC in internet to remote GSM device

    - by Jakub Jezik
    I have several remote devices that use GSM modem and gather data. I need to communicate with those devices from a PC station located in a office using the dial up connection. Is there a way to do this WITHOUT an additional GSM modem connected to that PC? Is there some way to accomplish PC to remote GSM device communication using e.g. VoIP or similar technology? I want to avoid installing an additional GSM modem in the office and use some software solution instead.

    Read the article

  • Access my local server by hostname or servername

    - by S.M.09
    I have a local host server hosting a few applications in tomcat which comes through a apache proxy The client or User trying to access these application has to access them like 10.XXX.XXX.XX:8080/appName OR 10.XXX.XXX.XX/appName But I want to replace the ip address with soem other name related to my applications. But I cannot go and enter the host name of the server in each users /etc/host Nor do I want to be setting up DNS. Is there another way to do this. I am using ProxyPass XXX YYY to redirect all applications of tomcat to port 80

    Read the article

  • Slow upload, fast download on Windows 7 64bit system

    - by Malik
    I've got a weird problem in the download speeds on my desktop PC (Windows 7 Home Premium 64bit) are consistently fast (approx. 400kB/s) but uploads are very slow (around 6-10kB/s). This has been going on for the last 3 weeks or so. I am a very competent user and troubleshooter, and have searched online for 2 weeks for a solution, to no avail. Part of the problem is that internet is provided by WiFi by my landlord and I have no access to the router (BT Home Hub router) although I know for sure he wouldn't have the first idea on how to restrict my usage :) (rules that out) Anyway, I've tried: - various drivers (my Wifi 'card' is TP-link TL-WN851N, and I've tried TP-link + Atheros + Qualcomm Atheross drivers, suggested by Microsoft) - various tweaks to network parameters (e.g. as suggested by SpeedOptimser) - various tweaks to Windows 7 services (e.g. disabling/manual-ing unecessary services) - raising and lowering head onto a reasonably firm surface at moderate frequency (jk :D) None of the above have helped, and I'm officialy asking for help now!! Thanks for your time and effort in advance!

    Read the article

  • SFTP access without hassle

    - by enobayram
    I'm trying to provide access to a local folder for someone over the internet. After googling around a bit, I've come to the conclusion that SFTP is the safest thing to expose through the firewall to the chaotic and evil world of the Internet. I'm planning to use the openssh-server to this end. Even though I trust that openssh will stop a random attacker, I'm not so sure about the security of my computer once someone is connected through ssh. In particular, even if I don't give that person's user account any privileges whatsoever, he might just be able to "su" to, say, "nobody". And since I was never worried about such things before, I might have given some moderate privileges to nobody at some point (not sudo rights surely!). I would of course value your comments about giving privileges to nobody in the first place, but that's not the point, really. My aim is to give SFTP access to someone in such a sandboxed state that I shouldn't need to worry about such things (at least not more so than I should have done before). Is this really possible? Am I speaking nonsense or worried in vain?

    Read the article

  • Installed IE8 & SP3 on XP now I can't HTTPS from any browser

    - by Kevin
    The computer is Windows XP Professional SP3 with IE8. On the Tools Options Connections the "Settings" is GRAYED OUT (I am an admin on the machine) Any browsing of https:// addresses results in IE displaying the following: "this program cannot display the web page" After installing an alternate browser and trying the same https:// address I get a similar error message. I have tried using Compatibility View Settings to for all web pages and this has no effect on the problem. HTTP addresses work fine, I can PING sites such as google.com without issue. Question: What could be preventing me from getting at the settings to check to see if I'm using a proxy? What else could be preventing HTTPS access?

    Read the article

  • Automatically reboot Windows8 if no internet activity [migrated]

    - by Patrick
    I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

    Read the article

  • OpenVPN access to a private network

    - by Gior312
    There are many similar topics about my issue, however I cannot figure out a solution for myself. There are three hosts. A without a routable address but with an Internet access. Server S with a routable Internet address and host B behind NAT in a private network. What I've managed to do is a OpenVPN connection between A and B via S. Everything works fine so far according to this manual VPN Setup What I want to do is to connect A to Bs private network 10.A.B.x I tried this manual but had no luck. So A has a vpn address 10.9.0.10, B's vpn address is 10.9.0.6 and B's private network is 10.20.20.0/24. When at the Server I try to make a route to Bs private network like this sudo route add 10.20.20.0 netmask 255.255.255.0 gw 10.9.0.6 dev tun0 it says "route: netmask 000000ff doesn't make sense with host route" but I don't know how to tell Server to look for a private network in a different way. Do you know how can I make it right ?

    Read the article

  • Windows Console .exe won't run if it's downloaded from the internet

    - by Jason Kester
    I have a nightly job on Windows Server 2003 that automatically updates itself by downloading its .exe from Amazon S3. I've noticed that when it performs the download and tries to run the newly downloaded .exe, it is immediately kicked back to the command line without actually running anything. I can verify this by sticking the new version of the code directly on the server and watching it execute successfully, then uploading it to the "update" server, running the bootstrapper then running the .exe and observing it fail to execute. I can only assume that this is due to Windows protecting me from running code from outside its trusted zone. How does a fella go about configuring it to allow code from this particular external location to execute? Thanks!

    Read the article

  • Verizon Fivespot firewall

    - by Patrick
    I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

    Read the article

  • dav_svn write access

    - by canavar
    Good day! I am configuring dav_svn and apache with ldap auth. What I want to do: allow anonymous READ access to repo allow write access to authenticated users Here comes my config: # Uncomment this to enable the repository DAV svn SVNPath /home/svn/ldap-test-repo AuthType Basic AuthName "LDAP-REPO Repository" AuthBasicProvider ldap AuthzLDAPAuthoritative on AuthLDAPBindDN "cn=svn,ou=applications,dc=company,dc=net" AuthLDAPBindPassword "pass" AuthLDAPURL ldap://ldap.company.net:389/ou=Users,dc=company,dc=net?uid?sub?(objectClass=person) <Limit GET PROPFIND OPTIONS REPORT> Allow from all </Limit> <LimitExcept GET PROPFIND OPTIONS REPORT> Require ldap-group cn=group,ou=services,dc=company,dc=net </LimitExcept> But when I do a test this config doesn't work... I can do checkout without auth and commit without auth... What I am doing wrong? Thanks!

    Read the article

  • iPad revocable vpn access

    - by carpat
    I'm a programmer at my organization, but somehow got drafted into looking into some server stuff so forgive me of my ignorance: They want to give our sales people secure access to our internal sites using their iPads. This must be secure (obviously) but also revocable from the company's side (if someone quits they can no longer access our network). I see from http://support.apple.com/kb/HT1288 that the iPad supports "RSA SecurID", "CRYPTOCard", and "Kerberos" authentication methods. Will one of these do what we need? Are there any major differences between them?

    Read the article

  • Accessing locally hosted webpage via public IP

    - by Mk12
    Sorry if this is in the wrong place.I don't really know anything about server-related things, but I'm really curious about this. On my mac I figured out how to make a simple web page viewable via the local ip address or computer name on the LAN, and also how to hook it up with a free hostname from dyndns.com. So the dyndns hostname points to something, how can I access it directly? Typing in the global ip address (of the router) doesn't work, but if it did, how would it know which computer to point to? There must be some way of directly accessing what dyndns hostname points to by typing in some number, right? Sorry I don't really understand how it works.

    Read the article

  • [linux] preventing access in shared hosting

    - by jack
    Hi Linux Admins I set up a small shared hosting that contains some sites. For each site, there is a user. I mean, for abcd.com, I created abcd.com user and put htdocs for web hosting. I have no idea on how to prevent abcd.com from accessing xyzd.com's data. I have chmoded by changing 0 to others permission, which makes access defined by Apache when I view it with browser. How can I secure access? Thanks.

    Read the article

  • Dual hard drive Windows 7 system, modified the registry to get programs to install on second drive, now IE doesn't work

    - by paul
    I have a dual hard drive Windows 7 system, Windows is installed on an SSD (C:) and I modified the registry to try to force programs to install on second HDD drive (another letter). The registry edits are pretty simple, just a few keys in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion to change the drive letter. For the most part the system is very fast and works great, but IE doesn't work anymore. With IE10, it opens for a flash with a white window then closes. I tried installed IE11 which opens a white window for a few seconds, doesn't respond, then crashes. I've tried all the solutions I could find. This includes resetting the IE settings, "uninstalling" and re-installing IE, which is just turning it on and off in "Turn Windows Features on or off", copying the Program Files\Internet Explorer files onto both/either drives, changing the registry keys back to use C:, lots of rebooting, and safe mode. Nothing has worked. I don't see errors in the event viewer, but I might not know what to look for. Any ideas on how to get IE running? I don't need IE for daily browsing, I just need it for cross-browser testing on sites I build and on the rare occasion a page only works in IE. I don't really want to use a virtual machine, but would be ok with something standalone like tredosoft's, but I'm not aware of something like that for current versions of IE.

    Read the article

  • Will Windows 7 Home Premium access company domain?

    - by neurino
    I'm going to buy 3 lowest-cost possible pcs for new trainee starting in our company. I found some HP notebooks with Windows 7 Home Premium installed. Will users be able to access to company Windows domain (i.e. to log as MY_COMPANY\username)? Or do I need Windows 7 Pro? Which functionalities are missing in Home version? Remote Desktop? edit: about sharing folders I can, with my linux machine along with my domain user and password, join the samba shared folders and printers and this could be enough for our needs. Everithing Users need is: shared domain folders shared domain printers remote desktop to access server remotely

    Read the article

  • Automatically reboot Windows8 if no internet activity

    - by GrapeCamel
    I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

    Read the article

  • One workstation gets slow access to the server, but others are fast

    - by Mike Hanson
    I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

    Read the article

  • Windows network: deny file access to another user if file is currently open

    - by Steve
    Some users on my network are having difficulties saving files, because the file is open elsewhere. Let's say Lemuel wants to edit a file, but Bernice in the next office over is working on it. Lemuel opens, edits, and tries to save, but then gets a "no write access" error. Bernice chortles with glee (since earlier that week Lemuel stole her sandwich). Unfortunately, various softwares will not warn the user that they have opened a read-only file. Is there a way (in Windows) to limit file access to ONE user only, i.e. 777 for the first user to open the file, and 000 for all users after that? (Sorry for the Linux terminology but it gets my point across).

    Read the article

  • SBS 2008 - DNS Forwarders timing out.

    - by Moif Murphy
    Hello, We have an SBS 2008 server that keeps losing connection to the internet approx 2-3 times a day. It's a simple setup, BT Business Broadband ADSL to a Wireless Zyxel router to the server. Clients connect via WiFi from their laptops. Plugging ethernet in makes no difference, only a reboot of the router seems to bring everything back again. I'm looking at the forwarders on the DNS properties page and they're timing out when trying to resolve the IPs. Currently there are two IPs in there, 194.72.9.34 which has timed out and 194.72.9.38 which has finally resolved to ns8.bt.net We've been in there and replaced all media, installed a PCI NIC, have changed the router three times. There are no errors in the DNS event logs pertaining to what's going on. We've also been on to BT who are adamant that it's not their end. Could someone shed some light on what could be going on or where else to look in the configuration of the server? Thank you.

    Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >