Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 178/287 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • Ping not working

    - by Nishant
    Ping is not working to and from this IP to my computer. inet addr:10.125.104.4 Bcast:10.125.111.255 Mask:255.255.240.0 My computer is like this Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.125.65.75 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 10.125.64.6 We both CAN reach the common gateway IP , 10.125.96.6 . What should I check ? What is the barrier in sending info if we both have a common gateway that is pingable ? Besides I can login to a intermediate server and ssh to this server also !!

    Read the article

  • Can not connect to service with my public IP, only with localhost

    - by Sanoj
    I have installed Linux Mint 8 (based on ubuntu). And I have setup a webserver on port 8098. I can connect to my webserver with http://127.0.0.1:8098, but when I try to connect to http://192.168.1.107:8098 from the same machine or another machine it doesn't work. How can I get this working? Is there any default firewall settings that I have to change?

    Read the article

  • Lan DNS not working after reinstall of Ubuntu 13.10

    - by DrorCohen
    I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

    Read the article

  • Can next hop address be same as destination address?

    - by Raj
    Like if host address is 100.0.0.1 and next hop address is 100.0.0.2 and destination ip address is also 100.0.0.2 Is this a valid use case? Any real life usage? <dest ip> <next hop> ip route 100.0.0.2 255.255.255.255 100.0.0.2 weight 1 next-hop-vrf GlobalRouter Above is the command on a router inside a VRF. 100.0.0.2 is pingable from host. 100.0.0.1 & 100.0.0.2 are an ip address assigned to a VLAN on host & destination respectively. On a linux box, Such configuration is valid. [root]# netstat -r -n Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 55.55.55.55 55.55.55.55 255.255.255.255 UGH 0 0 0 eth0 [root]# ip route show 55.55.55.55 via 55.55.55.55 dev eth0 As per my understanding, If a destination IP is reachable (i.e in the same subnet of host IP) we dont need a next hop. I came across one application for using next hop for destination IP in same subnet (i.e for VPN) See this: Will packets send to the same subnet go through routers? If next hop != destination IP but they are in same subnet as that of host, is a valid scenario for VPN, then i am wondering what are the applications of next_hop==dest_ip & subnet same as host? This is my first post in Super User. Extremely happy with the quick and warm response.

    Read the article

  • Wireless N extend G range?

    - by Sam
    I've searched all over the internet for an answer to this and I can't find one. If I purchase a wireless N router, with greater range than my current G router will the range of the wireless G signal go as far as the wireless N signal? I say this because Wireless N routers are supposed to be compatible with wireless G devices. Is the wireless G a lesser signal coming out of the router? Sorry if I confused you, I am a little confused myself.

    Read the article

  • Only receiving one document at a time from new web server.

    - by Robert Kuykendall
    We're trying to move our internal ticketing system from a Microsoft Small Business Server in the server closet to a Rackspace Cloud Server. The install is Fedora 11 LAMP, and should be default out of the box, except for the vhosts appended to the bottom of the httpd.conf. The new server is suffering from crippling load times, and watching the page load in Firebug it's easy to see the problem occurring, but I can't figure out the cause. Here is the [old server] (http://rkuykendall.com/uploads/old.server.png). I was expecting something like this, but a little slower since it was no longer hosted locally. Instead, the [new server] (http://rkuykendall.com/uploads/new.server.png) appears to only serve one file at a time. Here's another example of this [staircase load time effect] (http://rkuykendall.com/uploads/staircase.png) and another very clear example of the [staircase effect] (http://rkuykendall.com/uploads/staircase2.png). I talked to some guys on Freenode #httpd with no luck. I created a duplicate server to play with, and also created a fresh server with Fedora Core 13 and moved over just the database and web files with no luck. Any suggestions? ( image links disabled due to n00b-spam-restrictions )

    Read the article

  • Access Windows from Mac via Remote Dekstop Connection using hostname

    - by stevekuo
    I'm using Snow Leopard with Remote Desktop Connection attempting to access a Windows XP machine on a home network. If I specify the Windows PC's hostname it won't connect. Only by specifying the IP address does it connect. It's the same issue when trying to ping the Windows machine - IP address works, hostname doesn't. Both machines are on the same subnet connecting with a wireless router. Is there way to get OSX to resolve the Windows PC by its hostname?

    Read the article

  • What would cause a single working website to not work on 1 out of 5 devices on a network?

    - by th3dude
    There is a specific website that loads up without problem on all machines on my network (both wired and wireless) except one laptop. This laptop is a Windows 7 machine that was just recovered using the recovery partition, so it is fresh. The site will not load in Firefox 3.6 or IE 8. The website is http://www.weightwacthers.com The site loads fine on my desktop, iPhone, and Droid, but not the laptop. In all my years in this business I've honestly never seen this happen. Also, 'Is it down for me or everyone' reports that it is indeed only me. What would cause this to happen?

    Read the article

  • External WiFi Adapter for Eee PC 1000?

    - by Peter M
    I have an original Eee PC 1000 running the stock Xandros. I have run into problems where the internal WiFi card does not seem to have enough sensitivity to connect to a lot of access points. Although the computer will report APs in the area, unless the signal strength is over 80% (as reported by the Wireless networks application) I cannot seem get a connection. So is there a recommended USB WiFi adapter that is known to work with the Eee PC/Xandros system or in general with a Debian based system?

    Read the article

  • Cant get squid proxy to work

    - by danielgratz
    i need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments): acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 21 acl Safe_ports port 443 acl Safe_ports port 70 acl Safe_ports port 210 acl Safe_ports port 1025-65535 acl Safe_ports port 280 acl Safe_ports port 488 acl Safe_ports port 591 acl Safe_ports port 777 acl CONNECT method CONNECT acl our_networks src 192.168.1.0/24 192.168.2.0/24 http_access allow our_networks http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all http_port 3128 hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache coredump_dir /var/spool/squid Then i just put my server's public ip and port 3128 into my web browsers proxy settings... but it isn't working i can't visit any website. Please help. Thanks.

    Read the article

  • Everytime I ping my server, it is pinging localhost instead?

    - by esac
    I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

    Read the article

  • 2 routers at home- how to connect with VNC?

    - by Charles Leviton
    I have two routers at home. First router is upstairs and is connected to the cable modem. 2nd router is downstairs and acts as "signal booster" for the 1st router. Devices connected to the upstairs router have IP addresses of the form 192.168.1.n Devices connected to the upstairs router have IP addresses of the form 192.168.2.n. I blindly followed instructions from a website to do this set up, just glad it works! Upstairs I have a PC running Win 7 64 bit. Its assigned IP is 192.168.1.7. I have a VNC viewer running on this. Downstairs I have a 2nd PC running Vista 32 Home edition bit that is connected to the 2nd router and has IP Address 192.168.2.114. VNC server is running on this. It's listening on 5900. There is no firewall. When I try to connect to this downstairs PC from upstairs it fails with message "Failed to connect to server". I cannot ping to this either. If I try to connect to this downstairs PC using VNC Viewer from another computer that's connected to the same downstairs router then it works like a charm. So what's the work around if the viewer is on a different "network"? I don't have any problems doing remote desktop connection from the downstairs PC to the upstairs PC even if they are connected to different routers. Router information- Upstairs- ASUS RTN13U, downstairs- DD-WRT v24 RC-5 Thanks! P.S. I posted this on the Ultra VNC forum as well but that doesn't seem to have a lot of activity, so taking the liberty to multipost.

    Read the article

  • Extend university wifi network

    - by asfasdoiuh ouhouhouh
    i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

    Read the article

  • All wireless networks suddenly disappear every once in a while

    - by snakile
    Lately, about every 15-60 minutes, my wireless internet connection disappears. When it does I can't find any other wireless network, though such networks exist. Only after rebooting the system, it goes back to normal and finds wireless networks, but only for a while. 15-60 minutes later it's disconnected again, not finding any wireless network. I'm using Windows 7 on Lenovo Thinkpad X201s. What could it be?

    Read the article

  • Is it possible to cause artificial network packet loss or latency?

    - by nbolton
    I'm trying to reproduce some issues on a deployed application where the MSSQL server and client are running in two separate machines. I think there may be network issues between the two machines, so I'd like to try and reproduce these conditions on two Hyper-V virtual machines (on the same virtual server). Of course, the network for these virtual machines is "local" so it's actually far from the conditions in a live environment. Is there a program I can run on either virtual machine which will degrade the network performance? Or maybe any other work arounds? For example, one way to reproduce the conditions may be to run the VMs on separate Hyper-V servers in geographically dispersed locations (so the SQL traffic goes over VPN or something) -- but this is a little long winded I think. There must be a simpler way.

    Read the article

  • Troubleshooting Network Speeds -- The Age Old Inquiry

    - by John K
    I'm looking for help with what I'm sure is an age old question. I've found myself in a situation of yearning to understand network throughput more clearly, but I can't seem to find information that makes it "click" We have a few servers distributed geographically, running various versions of Windows. Assuming we always use one host (a desktop) as the source, when copying data from that host to other servers across the country, we see a high variance in speed. In some cases, we can copy data at 12MB/s consistently, in others, we're seeing 0.8 MB/s. It should be noted, after testing 8 destinations, we always seem to be at either 0.6-0.8MB/s or 11-12 MB/s. In the building we're primarily concerned with, we have an OC-3 connection to our ISP. I know there are a lot of variables at play, but I guess I was hoping the experts here could help answer a few basic questions to help bolster my understanding. 1.) For older machines, running Windows XP, server 2003, etc, with a 100Mbps Ethernet card and 72 ms typical latency, does 0.8 MB/s sound at all reasonable? Or do you think that slow enough to indicate a problem? 2.) The classic "mathematical fastest speed" of "throughput = TCP window / latency," is, in our case, calculated to 0.8 MB/s (64Kb / 72 ms). My understanding is that is an upper bounds; that you would never expect to reach (due to overhead) let alone surpass that speed. In some cases though, we're seeing speeds of 12.3 MB/s. There are Steelhead accelerators scattered around the network, could those account for such a higher transfer rate? 3.) It's been suggested that the use SMB vs. SMB2 could explain the differences in speed. Indeed, as expected, packet captures show both being used depending on the OS versions in play, as we would expect. I understand what determines SMB2 being used or not, but I'm curious to know what kind of performance gain you can expect with SMB2. My problem simply seems to be a lack of experience, and more importantly, perspective, in terms of what are and are not reasonable network speeds. Could anyone help impart come context/perspective?

    Read the article

  • How to get the speed of a network card on the command line?

    - by nelaar
    I am trying to see what the speed of some network cards on a remote server. Our reporting software says they are 10Mbps, but I am sure that is wrong they should be 1Gbps. Our monitoring software uses SNMP to query the servers, perhaps the servers are reporting information incorrectly. ifconfig does not report what the speed of the devices are. How can I see what the currently configured speed of the cards are.

    Read the article

  • Mark packets across computers?

    - by eudemo
    I use Transmission on Ubuntu and I'm having this issue, which basically says that QoS is broken because there is no way to limit which outgoing ports uses. I was thinking of doing a dirty and ugly hack and create an interface alias and define QoS based on source address, but was wondering if is there another way. Is it possible to mark the packets on the original machine in some way, using the owner and mark modules of iptables and sending this to the router who does the QoS? From what I understand, mark on iptables only applies to the local machine, so this will not work, but is there another way?

    Read the article

  • Two domains accessing same folder

    - by Liam Quinn
    I've just taken a new role in a school and am still familiarizing myself with their network, how ever I have recently been given a task and I'm having a little trouble finding out the fundementals of it. I have an admin network/domain 10.49.x.x and a classroom network/domian 192.168.1.x both connect to a Proxy server 10.49.202.231/192.168.1.51. Each domain has it's own shared folders as you'd expect, files and software installs etc, how ever there is a folder "staff" on the classroom network that all the teachers on the classroom network can access. The users on the admin network would like to access this same folder. How do I go about making this happen?

    Read the article

  • Subnet address in apache access log

    - by m0ntassar
    I was inspecting my apache access logs(I use default combined log format) and I came a cross a wired entry 69.171.247.0 - - [22/Oct/2012:18:15:20 +0200] "GET /some site resources HTTP/1.1" 404 514 "-" "facebookexternalhit/1.0 (+http://www.facebook.com/externalhit_uatext.php)" As u see, this query come from a facebook robot that extract objects from site when somebody post a link. What I find weird is the logged ip address : 69.171.247.0 Does anybody know how is that possible ?

    Read the article

  • Do I have to use a DNS PTR?

    - by JrSysAdmin
    I am currently working on a site in my free time with a few other guys and we are wanting to redirect xxx.com to our new site, yyy.com. So we have xxx.com set to redirect the 216.111.11.1 which is the IP for yyy.com. However, this just says the website is unavailable so it seems as though we need a DNS PTR to redirect 216.111.11.1 to yyy.com. Is there any way to do this without a DNS PTR? The pointer will cost us $15 and it just seems like there should be some better way to go about doing this. Any ideas?

    Read the article

  • Taskbar Disappears Over Remote Desktop Connection When Outside Local Network

    - by CMikeB1
    I've got a machine on my home network running Windows Server 2012 (Based on Win8) and rather than attach a monitor I remote desktop in and it works fine on my local network. The problem is, when I try to access it from outside my local network the taskbar disappears completely. When I minimize an application rather than minimize to the taskbar it simply closes the window as small as it can as if the taskbar never existed (see photos at ). I've messed with the connection properties (show/hide desktop background, etc.) with no luck. I've used the following methods to remote in and they all are fine when on the local network and taskbar-less from outside: Remote Desktop Connection on Mac Remote Desktop Connection on Windows Jump Desktop on iOS using RDP To access the computer from outside my local network I'm using a Linksys router and mapping to the server IP, port 3389. See Photos: http://i.stack.imgur.com/FyUeQ.png http://i.stack.imgur.com/9MnVr.png

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >